Home

Here

1. v62 HNS SPC DataConnect ka HNS SPC IDConnect ue Print Engine a E mail Engine u3 Alert Engine us Report Engine I Export Engine uas Sample Control Engine ous On line Update Update Engine V1 6 V1 6 New functions 1 The measuring program functionalities are expanded with a complex dynamic measurement function it is possible to measure axial parts in measuring device on rotating This measuring mode can be used with inductive measurement probes HNS INDMUX and Digimatic gauges HNS SMUX USDMUX It is possible to manage measuring devices with one and two axles by dynamic measurement function See the HNS SPC Measuring program documentation Functions in the measuring program which can be used in device strategy are enlarged for example measurements can be sorted into groups so more measuring devices can be used in one measuring program in case of using a measuring device it is possible to use also manual gauges in a measuring program with device strategy etc See the HNS SPC Measuring program documentation Continuous every part measurement can be handled by measuring program automatic SPC sampling based on measurements of every part can be set also See the HNS SPC Measuring program documentation Measured result of continuous measurements made by measuring programs can be logged It is possible to receive beside CSV files measured results stored in simple text files hav
2. English user interface is fixed invalid icons are corrected Default values of index Cm and Cmk are changed from 1 33 to 1 67 Invalid capability index displaying on control chart is fixed English OoC message text is corrected MPG Automatic Head Tracking is fixed Invalid stable unstable status detection is fixed may be occurred on beginning of Xi chart MPG handling of one sided specification is fixed in Mx command Texts in English reports are corrected Invalid sending of OoC alerts is fixed Default Zgoal can be configured Pareto diagram is fixed 6Sigma Capability Analysis Report unit column is fixed Riaszt s allapotmatrix a k nnyebb rthet s g rdek ben kism rt kben talak tva MPG ebben a kiad sban a szab lyoz k rty k automatikus megjelen t s t azok OoC statuszatol f ggetlen l is el lehet rni 6Sigma Capability Analysis Report PPM LT ST and potential Z PPM calculations are fixed Alert task death is fixed Automatic services Alert Engine Export Engine and DataConnect are automatically shooting down on changing of factory or database Upgrade Information Released 06 24 2006 A 0 iann x Database vise MPG Inbuilt Parser U207UL1_ Gauge Engine v158 0 HNS SPC DataConnect UL HNS SPC IDConnect vio _ Sound Engine uae Print Engine us E mail Engine I T Alert Engine uas Report Engine za Export Engine V1 1 on of current
3. Inbuilt Parser V1 47U1 0_ Gauge Engine v1461 HNS SPC DataConnect V1 6 HNS SPC IDConnect vie Sound Engine vie i SZ version of currently used database 1 SQL session closing fixed the program left opened session on re connection to SQL database this session was inactive until the user exits the program 2 ADC attributed DataConnect file loading fixed The program handles the feature when the ADC file has not new line characters Cr Lf in its last line 3 Intervention identifiers copying in database archiving is fixed SQL xBase archiving 4 Intervention identifiers copying in database copying is fixed SQL gt xBase copying 5 SQL database deleting of attributed parameter failure group is fixed store procedure makes deleting have to be changed script Upgrade8 SQL 6 Measured value status displaying in MPG measured value list is fixed 7 MDC measurement DataConnect engine is revised 8 MDC measurement DataConnect engine settings can be configured using the DataConnect Settings window of the program settings functions moved from the Registry to the program menu Number of identifiable process by SPC MDC files can be set SPC MDC files Loading of process identifiers from SQL server can be configured also user can speed up the transmission if he has information about contained data in SPC MDC file New checkboxes Load process identifiers by samples To be turned o
4. UL HNS SPC IDConnect vio Sound Engine vue Print Engine uz E mail Engine vue ersion of currently used database Detection and using COM10 COM20 serial ports are fixed on XP Previous version could not detect and use ports above COM9 on XP this compatibility violation eliminated by this fix MPG parser changed The length of the formula can be defined in S type MPG commands changed from 64 to 255 characters MPG Editor fixed Gauge port and channel controls are fixed on the MS M MX page of the MPG Editor Previous version changes settings improperly on scrolling commands of the page MPG Alert sending by e mail This version supports monitoring of events occurred while MPG is used The program collects this events creates a text report and sends this report to a recipient mailbox Events can be monitored and reported automatically a Data input events e g re measuring damaged status assigning to the piece measured parameter is out of specification data input aborted by the operator etc b Control chart events e g the process is not stable OoC cases distribution error too low capability index value etc c Operator actions intervention made or comment placed by operator on the chart HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp
5. 166 1898 as g psor Machine hag 00 116 es g p head B 2 position B Ki Sample size Pa ho sc iszegecs_t tpa XYZTEC tester handling modes which can be set in MPG Simple mode for receiving measured values Spec 1 The program does not make extra mode setting it is no code sent out in case of this mode Gauge identifier in MPG X YZ TEC Automatic mode setting for receiving measured values Spec 0 99 Spec field consists the tester mode which can be set automatically at the started the measuring without operator intervention by MPG Mode is set by sending an identifier code which is defined in Spec field after the checking of the feedback which comes from the tester The mode is also closed by MPG automatically Gauge identifier in MPG XYZTEC N where N is a mode identifier from 0 till 99 19 Scale type KERN EC is suited 20 SQL database creating product certificate by mask code Certificate can be created faster significantly as a result of optimisation of database getting used in this function 21 Data export to Excel TMO value can be set longer by 1 minute too The name of the relevant Registry Excel DDE Client TMO The name of the relevant Registry string value Possible values 7 600 defined in second 22 xBase database new check function by correcting a failure in the ASAMPLE DBF table Name of the Registry which makes for switching on the check Check
6. 36 37 38 A a S 12 13 14 15 16 17 soll ae ae Drop down list support on folder and file name input fields xBase database path MPG directory etc see a General program settings item of Settings menu HNS SMUX 2 SMUX 4 SMUX 10 Data button handler is fixed HNS SMUX 2 SMUX 4 SMUX 10 Communication can be logged see the manual of Special Program Settings Mitutoyo Digimatic MUX 50 and DMX 8 Communication can be logged see the manual of Special Program Settings Microsoft SQL 2000 ODBC is supported Indexes are created with database installation ORACLE and MSSQL In case of upgrading the SQL Scripts UPGRADE EIndexes SQL script have to be executed by DBA Closed 01 10 2000 Upgrade Information Measured samples upgrading of Xi or mX chart is fixed BOT Function to archive xBase gt xBase SQL gt xBase Attributed chart type selection fixed User interface of control chart and bar chart fixed access rights by access level Re measure can be disabled in the MPG The operator can not break the input process and can not go back and repeat the previously entered data if this function is disabled in the MPG Settings menu Operator s actions in MPG data input flow can be logged Product selection in database which contains more factories fixed xBase database Control charts can be displayed automatically in case there are not input data in MPG Moving CL s on p and u charts
7. 45 8 HNS SPC DataConnect V1 4 HNS SPC IDConnect V1 8 Ok 1 New control chart interpretation inside failure groups charts by failures main chart with all failure data chart by failure categories chart by failures of the failure group HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade information Publication date Build 25 November 2003 e_n ES Program Configuration Data x Database vua wie i MPG Inbuilt Parser Y1 4 V18 Gauge Engine vrasa HNS SPC DataConnect Vi4 HNS SPC IDConnect vie SZ versi version of currently used database 8 9 Batch type export function added After the selection of a product the program exports samples assigned to the product Data can be exported into a simple text file or an Excel table Export format can be configured as in the previous program versions New function to export interventions of the analysed range of process Program exports process identifiers and interventions with their date time and other sample data Interventions can be exported into a simple text file or an Excel table The interventions of the machine can be assigned a product and a measured parameter and a failure group When the operator uses the intervention list the list contains the
8. Digimatic USBMUX if there are used more channels simultaneously Fixed Upgrade Information Released 04 24 2008 E O l O EREEREER E ES E Prooram Configuration Data A Database Porna pua MPG Inbuilt Parser Y2 67V1 1 Gauge Engine 163 8 HNS SPC DataConnect visi HNS SPC IDConnect vio Sound Engine ue Print Engine us E mail Engine a Alert Engine T ws Report Engine vie Export Engine V1 3 on of currently used database New functions 1 HNS INDMUX 64 interface has been added to list of supported gauges whereby electronic probes can be connected to a computer 2 Possibility for setting the number of decimals in displayed calculated parameters decreasing number of decimals compared to the foregoing see Settings Calculations 3 Possibility for displaying a diagram which sings actual value related to tolerance limits in measuring window in case of using a gauge connected by HNS Digimatic SMUX or USBMUX interface Operation to set a value in the S item of the measuring program Possibility for modifying the marking of measured value out of specification limits see Settings MPG Others 6 Histogram can be displayed set to tolerance limits also for that histogram which is displayed on engineer level in Analysis menu see Settings Calculations 7 Program starter window can be displayed as a status icon on the System Tray Modification correction 8 Itis deleted CpokChart lo
9. Engine us Report Engine us Export Engine u3 Sample Control Engine ue on of currently used database New functions 1 Sampling control function ESECO Speedmaster SM 10T Densitometer added to list of supported gauges Automatic upgrade for configuration files versions supported from 5 4 25 w p It is possible to set that by running a measuring program only the processes are displayed in the process selection window that are appointed for automatic chart displaying This MPG setting is valid for a workplace 5 Possibility for displaying a diagram which sings actual value related to tolerance limits in measuring window in case of using a Simplex and Duplex Opto RS232 gauge 6 Itis possible to set that the Save this marker with all samples of the MPG switch in the Marker Data window that is displayed by running a measuring program by means of the M button of the control chart or measurements diagram is switched on as default It is possible to list the products after their name in the product selection windows Displaying of measured values of M and MX type MPG commands can be turned on off Modification correction 9 Changing made on the E1 E2 sheet in the MPG Editor are not saved E2 item is always saved as an E1 item Fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu h
10. VUR HNS SPC IDConnect vio Sound Engine uae Print Engine us E mail Engine Ee Alert Engine us Report Engine f us Export Engine V1 3 on of currently used database upgrade it New functions 1 MAHR DIGIMAR CX2 DX2 height gauge has been added to list of supported gauges 2 Displaying of capability index values can be disabled in printed analysis See File menu Print settings menu item 3 Sample codes user has given are displayed in capability study report in Q DAS format in case of machine capability study See Analysis menu Analysis menu item Capability study function 4 1RS 4BOW RS232 multiplexer has been added to list of supported gauges Gauge control function See Settings menu Measuring gauge settings menu item 6 Incase of automatic head position number incrementing can be changed the given closing value by the user who runs the measuring program see MPG menu Run menu item 7 New archiving feature archived samples which are selected for given time periods will be arranged in separate databases 8 More maximum five HNS DataConnect directories can be selected together See Settings menu HNS DataConnect menu item Modification correction 9 In case of using an xBase database by many users by many program issues occurs an database record reading failure file LICENCE dbf Fixed 10 Names in the report s header do not follow the settings in database terminology Corrected 11 There i
11. format of the file to be imported is selectable during the import of measuring values from text file As decimal and separating mark can be given a and a ora and a 5 Among DataConnect settings in the previous point defined setting is also possible The Settings intervals check function in Database menu has been corrected Oracle multi scheme support The PL SQL scripts given to the administration and the program have been modified In what follows it is possible to create more from each other independent scheme so from the point of the user several from each other independent SPC database can be created and can be used on the same Oracle database server The earlier version used to support only one according to default SPCuser named user scheme In the proper script of the upgraded version USER SQL it is possible that the database administrator defining the user scheme can give the name to be created Under different names optional number of schemes can be defined and for their handling SPC program is prepared MPG regulating card represent has been modified The download time of data has reduced by the optimisation of Oracle select used for the load of data of control chart so the appear of control chart has become faster Upgrade information Publication date Build 6 January 2005 G Database vue wus MPG 7 Inbuilt Parser U16 U11_ Gauge Engine uraza HNS SPC DataConnect
12. modified The program prints the name and drawing number according to default into the column of product identifier of the certificate The print of unique product identifier used in SPC database can enabled with the following Registry note HKEY LOCAL_MACHINE SOFTWARE HNS SPC 5 4 Product Code On Certificate Enabled After giving Registry note the program prints the identifier the name and the drawing number as well into the product identifier column in that case when the product identifier is the same as the drawing number of the product then this identifier appears only once HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 10 11 12 13 14 15 16 17 18 19 20 21 22 CD auto start HTML has been modified The elimination of sample and the setting of the faulty and outstanding status of measured values are enabled also for the second accessibility level after the upgrade earlier it was permitted only for the highest accessibility level Automatic detection of outstanding values in the function of text file import The program performs the examination of outstanding data also in case of import from measured samples measured values text file if in the menu point Settings Calculatio
13. name of the S rae m Remove ls Position i f interventions special dependencies product measured parameter failure group assignation Cancel ox are not copied Type or modify item data and intervention list The control chart view is corrected in case of one sided tolerance parameter at view between specification limits or maximum minimum values on the X chart MPG the log and the alert did not consist earlier the changing into data input by keyboard by the operator in case of gauge error In the current version writes the program also this event into the MPG log and the monitoring of this event is in MPG alert too Note The view of control charts can i be happened with choosing by the operator or Header MSM Mx s HU A AS A1 A2 AU E1 E2 Alert File automatically on the basis of M Send E mail alert to address arga hns gyor hu the defined MPG setting The eee ee a E f t MV Change to keyboard input V Re measuring MV LCL under MV LCL under analyses In reverence O MV Re attributing MV OoS measurement MV UCL over MV UCL over control ch art process an d MV Dropping data MV Damaged measuring M close to CL M Close to CL distribution are performed V Aborting input V lower RUN V lower RUN x MV Violated distributi only in reference to viewed lt a aan T A ai i control charts simultaneously ananez T oe ee f 7 gt V TREND up V TREND up with the
14. pattern HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade information Publication date Build 15 August 2004 l Database oea a MPG Inbuilt Parser V1 4701 8 Gauge Engine v1 47 8 HNS SPC DataConnect V1 6 HNS SPC IDConnect vie Sound Engine vie Print Engine f via SZ version of currently used database 1 Special Hungarian characters appearing fixed O in prompts of the programme windows New fonts used in this version SPC 1 FON 2 Automatic parallel port detection fixed see 5 in upgrade information of previous version This version uses fixed GET_ IO DLL Previously supported special settings Registry entries are supported in the future too If there are not this special settings than the programme detects the available parallel ports and their physical address to use 3 Print design changed All printed page formats are changed Attention The Product Certificate is also changed and there are minor changes in its contents 4 New print design to print capability study page New function added to print Q DAS style pages old style is available too Print style to use can be selected with Print Settings item in File menu 5 New function to print parameter certificate In previous ve
15. used as data logger it can store data in memory and can calculate basic statistics The new programme function makes possibility to load data stored HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 10 in Elcometer 300 SP and save this data into the SPC database Using of the new function is same to previously data logger functions AD Fast A D measuring to detect peak of fast changed analogue signals changed This measuring mode is hardware dependent so the default measuring time is different by PCs Measuring time can be configured setting of number of measurements Number of measurements can be set using a special Registry entry This number was limited lt 65535 in the previous versions but it can be set freely from this version AD Fast A D measuring signal diagram can be shown Measured value time diagram can be shown in a separate window on the screen Turn on the diagram checkbox in the gauge settings window to show the diagram Outgoing value detection works on samples when size is upper than 20 Automatic outgoing value detection worked when the sample size was less than 20 but now the detection is working on all possible sample size Upgrade information Publication date Build 9 November 2004 Database ue ue 7 M
16. view and the alert is M Intervention M Comment G Middle Third V Middle Third done on the basis of these analyses As previously is written the alarm e mail massage is sent at the exit from the program or at starting a new data input M Log alerts gt C HNS SPC 7 Suggestion The Chart automatically switch in MPG should be on to monitor and alert in reference to accentuated processes Failure in handling of rejected sample is corrected If all measured value is invalid outstanding or damaged than the status of the sample is set rejected automatically and this status cannot be deleted till it is not a valid value in the sample If compulsory tool identifier is defined than from the tool identifier window cannot be gone on without filling in This window could be closed earlier The current sample size can be set in data input window in case of changing sample size by input attributes data by pieces This value was accepted without control by earlier program version If the defined value was lower than the number of pieces taken into already than the given sample was not recorded in the database The failure is corrected the actual defined sample size must be larger or equal to the number of pieces checked and taken into already HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www H
17. 0 n MPG window fixed even the gauge initialisation failed MPG window program appears measurements of S type samples not only direct measurements Sample ID s shift team and operator ID can be modified subsequently using sample list this feature available for measured and attributed samples both DataConnect engine fixed symptom was not identified values load and saved to process of last identified value invalid extra samples can be saved DataConnect GDI error fixed MPG automatic control chart appearing can be configured for appearing only for control charts found OoC all automatic charts displayed or display charts with OoC MPG you can configure MPG engine for automatic marker input when an OoC appeared on automatic control chart You can configure automatic marker input for operator has to enter an intervention or text comment TESA BPI initialisation procedure fixed inductive probes Automatic outgoing value detection fixed detection was invalid even sample had more values with damaged can not be measured status Chart selection fixed in window of process settings using acceptance type of chart MPG counting of number of rejected pieces fixed piece by piece attributed data input using S type command of MPG MPG multiple process appearance in the MPG s chart selection window is fixed MPG all new measurements displayed in measured value diagram Data input type can be c
18. 2 row created by name created by ID 3 row last modification 4 row last using 5 row sampling rate specification 6 row can be used by 1 can be used by 2 can be used by 125 7 row comment 8 row measuring input strategy A P K 9 row product code 10 row EmptyMask MashkFilter EmptyTeam TeamFilter 11 row oe This row can be empty so you can use your all previous MPG s without editing The fields are independents so you can use new features as followings 10 row i MaskFilter Empty Team TeamFilter 10 row EmptyMask 3 EmptyTeam TeamFilter 10 row CG EmptyTeam TeamFilter 10 row EmptyMask MaskFilter TeamFilter 10 row Ui MaskFilter 3 TeamFilter 10 row goog MPG editor supports these new features of MPG 3 Team ID and mask code field names of factory assigned terminology settings can be overridden by new product level settings You can specify the team ID and mask code field names between product definitions If product level team ID and or mask code names are specified these names will overwrite the factory level team ID and or mask code names otherwise the factory level field names will be used New function needs database upgrade xBase database upgraded automatically Run UPGRADE4 SQL script to upgrade Oracle database Using Microsoft SQL database you have to run the PRODUCTx SQL script 4 Insert next string value into Windows Registry to assign Data range
19. ASAMPLE DBF Unique Key Duplications on Re indexing Value of the registry Enabled This new check and correct function is built in the database index should be used by the followings above Registry should be defined than should be started the Reindex xBase databese function 23 Reserved identifiers can be seen and copied at adding new identifier measured parameter failure group In this window can be seen all earlier existing identifiers contrary to earlier versions aA Reserved IDs x 1F 1T gt TEST TEST E co 1F 1T gt TEST 988 TEST 9988 4F 1T gt TEST 1 TEST 1 41F 1T gt TEST 18 TEST 1 1F 1T gt TEST 11 TEST 11 1F 1T gt TEST 12 TEST 12 1F 1T gt TEST 13 TEST 13 HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 24 The list of the interventions which are defined by prm x 25 26 27 28 29 a machine can be exported to a text file Code a respectively can be imported from a simple text file nane IF 1HORKGROUP 1MACHINE c 1F 1WORKGROUP 1 MACHINE by following buttons gge gt Tool Interventions 3 Ic Unchangeable Attention T Changeable m Add Le Intervention export and import extend only on the Head ft Ey Change name first and second
20. C time of last using Logging directory e I Display automatic control charts only when OoC found gt Operator have to set intervention or comment on Oot T MPG alert function enabled Subject Alert Jo Change process capability study state automatically Gise GEGM calculation iv Append MPG name after the subject text E Change control limit settings automatically when capability study changed T Refresh control chart automatically Cancel x Check and set your MPG configurations Check and set your MPG configurations 5 E mail sending is possible also outside a domain 6 The program signals the actual position of the even measured value by measured data input in the MPG window is no signal by attributes Repeat Back LSL 9 00 mm Measurements aA Data Input From Keyboard x Value R mm Blinker signal in the field of the actual measured value 1iHossz 23 LEZ Enter Jpamaged Lod cancel Tol m r 4 Szakit szilar Type measured value ENTER 1 351 0 Sampling The signal steps back the earlier measured value which must be measured again is seen grey coloured The signal steps back to the first item of the row and every measured value of the cancelled row which must be measured again are seen grey coloured 7 Itis possible to make a log file about the using of MPG and MPG alert see Program and MPG Settings The log files ca
21. HNS SPC 18 19 20 21 22 23 24 25 26 27 28 29 30 Sls 32 Upgrade Information MSSQL 7 native driver is added to the list of supported database drivers Multilevel MPG selection 3 levels max MPG editor s browse function is fixed error detected on editing an existing MPG using multilevel MPG selection Number of rejected pieces calculated automatically when the number of failures is one Program goes back to the previous level of the multilevel MPG selection It can be disabled in this case the program goes back to the main menu from all MPG selection levels See the Special Program Settings MPG picture displaying is fixed Automatic data saving function of MPG is fixed When MPG includes E1 E2 commands only the program does not input the sample data all sample data sample time operator ID etc are generated by the external measuring program Faster calculation of the Capability Index Diagram Additional validation of Certificate settings Certificate settings are fixed checkbox Capability Index Diagram calculation is fixed time border detection of indexes for months Printing is fixed printing of more than one page Displaying of the UCL LCL if fixed on attributed control charts Sample selection for XimX Chart is fixed xBase database Specification setting is fixed SQL database New program mode for the operators There is a new special setti
22. NS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information Released 09 29 2005 eee ee eee PCH Cin Database vs us MPG 7 Inbuilt Parser V1 9 U11_ Gauge Engine vise HNS SPC DataConnect UL HNS SPC IDConnect vie Sound Engine uae Print Engine u3 E mail Engine uz Alert Engine ua Z version of currently used database 1 Magna Mike 8500 Thickness Gauge added to list of supported gauges 2 A D card support extended with supporting of Advantech PCI 1711 3 Special Flatness Gauge name settings fixed 4 Precisa BJ series balances added to list of supported gauges 5 Bizerba HW HWI series balances added to list of supported gauges 6 New MPG feature added You can set the method of ID inputs on beginning of MPG s ID inputs on each MPG running ID input on the first running of the MPG program will use this ID s on next runnings of the MPG This feature can be enabled or disabled in the MPG 7 New MPG feature added There is a function to generate the head or position ID s numbers automatically Before this version these ID s can be typed by the operator using the keyboard only Now you can configure the MPG s for automatic ID generation if there is a rule to generate ID automatically 8 The number of heads and positions of machines can be changed Before this version the number can be set when the machine is defined and can not be changed later 9 Measurin
23. PG Inbuilt Parser V1 5 U10 Gauge Engine HNS SPC DataConnect UL HNS SPC IDConnect Sound Engine ue Print Engine E i ersion of currently used database The represent of date and time of sampling in MPG window updating after giving sample data has been corrected The handling of stored size and position features of windows has been modified in case of non sizeable windows The setting into basic position of the stored features belonging to windows has been modified The function has been removed from General Program Settings window to an independent menu point of menu Settings In the upgraded version the function sets the features of the main window into basic position as well Dynamic sizing of windows has been introduced Windows XP compatibility The upgraded version of the program handles the window features which differ from special frame and heading size differing from default and as a result of this the size problem appearing in a few windows during the run on XP comes to an end the position of some buttons the size of some graphics are not adequate The represent of measured values without decimals has been corrected Parameter certificate has been modified In case of non automatic qualifying the program does not print No Data label in the measurement results column So the column remains free and it can be filled manual by the operator Feature and product certificate have been
24. TESA and other OPTO RS message implementations TESA doesn t send positive sign of the measured value while other OPTO RS gauges send it The TESA OPTO RS dialect is automatically detected and value reading works correctly with this fix 8 Gauge name can be set and displayed on measuring You can assign a free name to each gauges selected in measuring commands of MPG When the operator uses the MPG this name if specified will be appeared in the gauge window during measuring Upgrade information ee eee Ea Publication date Build 25 January 2005 Database vue use MPG Inbuilt Parser 01 77011 Gauge Engine Vraza HNS SPC DataConnect Ea HNS SPC IDConnect vio _ Sound Engine ua Print Engine V1 2 E mail Engine V1 6 SZ version of currently used database Hot fix displaying of control charts of MPG MS7 MV and A1 A2 AV commands is fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information Closed 08 04 2005 Database VL8 N MPG Inbuilt Parser V1 8 V1 1 Gauge Engine V1 48 1 HNS SPC DataConnect V1 HNS SPC DConnect EZE aar aS Sound Engine Print Engine E mail Engine SZ version of currently used database 1 If the filter is set and available
25. abase New functions 1 Realignment of the measuring program window here can be seen dates of 14 items together instead of previous six items 2 Itis possible to modify the measured values after finishing of the data input but before saving the dates in measuring program window by clicking on the list 3 Modification the handling of the automatic head position ID actual ID recorded and by next running of this measuring program will give the next ID CSV file input in the measuring program Increase of the picture displayed in measuring program 324 x 234 pixels Correction 6 Correction of the failure of handling the automatic head position ID 7 Speed up of processing of DataConnect file in case of x dates in Oracle database 8 Data export into Excel table in reference to all processes is fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC pesss Ee eS ha a a SNE OEE REE i Ej Program Configuration Data x Upgrade Information Released 05 05 2007 Database U via MPG 7 Inbuilt Parser V2 3 V1 1 Gauge Engine V1 66 6 HNS SPC DataConnect V1 9 HNS SPC DConnect V1 6 Sound Engine V1 8 Print Engine V1 6 E mail Engine V1 2 Alert Engine v1 5 Report Engine V1 6 Export Engine LE New fu
26. am checks trigger value Start scale which set in Settings sub window because this value can not be lower then lower calibration point Calibration point 2 scale Message Start displayed in initialisation window status bar when invalid trigger settings found Measuring time seconds recognised and handled by DataConnect interface Program recognised but did not store or write back seconds but now seconds handled as part of measuring time Handling of HNS SMUX s communication failure during initialisation fixed Automatic communication port selection fixed in DataLogger windows New A D card supports Advantech PCL 818x ISA PCI 1731 PCI A D card list fixed in MPG editor Sample selection menu fixed in sample remove functions Password input window fixed disabled password mode Critical relations between xBase tables are checked in database maintenance function Save process settings function fixed Measured process save settings for next samples New service HNS IDConnect export SPC identifiers and names into text files xBase and SQL database are supported Closed 01 22 2002 Upgrade Information Installation program changed upgrade can be installed without removing of the previous version MPG supports warning window appearing when measured value is out of specification Operator can re measure the current parameter or assent the measurement This feature can be enabled or disabled amon
27. and the automatically displayed control chart closed if the measuring program contained attributive items only and automatic control chart displaying It is fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC HNS SPC V5 6 x Upgrade Information We will issue the upgrade information on new releases of the HNS SPC software at the www hns eu spc downloads SPC56downloads aspx page in the future The V5 6 1 the first release of the new V5 6 version of the HNS SPC was released on 27 August 2012 and the upgrade conditions was also changed from this date For more information see the www hns eu page HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu
28. arameters is optimised The current version is faster by 90 than the previous version after our measurements It is necessary less time by 20 to appoint measured values for analysis after our measurements The program gave false OoC signal in case of one sided low limited tolerance The failure is corrected Backup the samples by time is corrected in case of SQL gt xBase backup The previous version did not make allowance for time limits and the whole attributive database was copied by backup by time MPG there could occur in the earlier versions that the control chart which should appear in case of Out of Control automatically appeared in the case when there was any Out of Control on the control chart The reason of this was the fault Middle Third analysis by using of MPG The failure is corrected Analysis window handling by MDI Multiple Document Interface is possible in this version respectively can be appointed more separate range of sample by this view Using of MDI windows can be switch on in the General Program Settings window EA General Program Settings Drop down list with data given earliers in the field Ea List length 5 E Ie Selection menus used in loop Disabled characters in SOL identifiers Yal Mr k GM ow Gv oP 0 VAR EVM R OF OF OF UF OF 3 W Save window position and size IZ Use MDI windows for analysis diagrams Set general program settings In case of using MDI windows
29. by select of a sample range onto analysis at appointment of variables and attributes too on the Filter button are seen a red coloured blinker warning A Select Measured Samples x Sample data Settings Operator IS Mask L Specification Bilateral Shift Toat bama jea feza foza Team Rejected Ack Capability Preliminary Process Sample Measurement Date Ack Set id las General 18 18 4 4 2005 8 47 a m a Distribution Normal 4 4 2005 8 52 a m 0 0090 3 0000 0 0090 4 4 2005 9 28 am Control chart O 4 4 2005 2 22 p m spc fs Monitoring 4 4 2005 3 4 p m CL Calculated Calculated 42865 3 9 p m Calculated Calculated Cancel N N NHB Kijel lt mintatartom ny ae D Sample F 2 a in it tri IR E _ Bene C a Re O E O Select first and last sample of sample range to use with analysing functions This view is warns that in the Filter Conditions window the Enable filtering switch is on 2 The view of drop down list of filename choose windows is corrected at the opening of the window 3 The settings relative to measuring program were relocated from the E mail Settings window in the MPG settings window see also in the following point ES E mail Settings x SMTP server hns gyor hu Sender name hns SPC V Append computer name after the sender name Test gt gt Cancel ox Set configuration parameters used to sen
30. can be seen the Window menu in the main menu by the appointment for analysis The appointed data for analysis and the opened analysis windows can be managed in Window menu It can be appointed more at the most eight range of sample in the same time The identifiers of the appointed sample range can be seen in the lowest menu items of the Window menu The identifiers in order parameter product workgroup machine head position if the sample range is appointed in reference to head position d ka The actual appointed sample range Set current is marked by a on the first character position of the menu item Window Help Hose all irons PIRI ell ioe Bestoe lal windows Pascade all Windus gt TEST 1 1F 17 1F 15 15 1G K gt TEST 2 1F 1T 1F 15 15 1G K l gt TEST 3 1F 17 1F 15 15 1G K HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 17 Defined operations by appointment of sample range set current for an appointment reset the selection Set current gt TEST 1 1F 1T 1F 15 15 1G K gt TEST 2 1F 17 1F 15 15 1G F Reset selection I gt TEST 3 1F 17 1F 15 15 1G It can be opened analysis windows in reference to current selected sample range The first for menu item of the W
31. ce Sample size Failure Name OK NOK ioa 90901 Fel t d s R 16 e001 Fel t d s E 8 To check 2 Hi nyz menet Y To check Z Hi nyz menet T P ft 66663 Hi nyz horony E fi 66663 Hi nyz horony io Faulty pcs 60994 Hi nyz furat R Faulty pcs 60094 Hi nyz furat R E fo anons S r lt menet 8 g anons S r lt menet E 66666 S r lt csap gyhely E 66666 S r lt csap gyhely H F E E 66007 Hib s hegeszt s 66007 Hib s hegeszt s Abort Abort Enter the attributed results of piece or of sample b Enter the attributed results of piece or of sample a Mode to be used by the operator can be selected on A AS page of MPG Editor using the Safety data input with OK NOK marks switch HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC ES MPG Editor B Header MS M MX S HU A AS A1 A2 pU E1 E2 Alert File Input and store attributed data by pieces Item E Fa Executing order K of Add M Chart automatically Remove Code Name Failure group fElen rz s Vizu lis ellen rz s Workgroup BPH BPW ker kagy gy rt sor Machine Put BPH ker kagy megmunk l 1 head B 2 position B 2 Select 7 OPTO RS gauge support fixed There is a small incompatibility option between
32. chine capability study it is to print standard deviation s among distribution parameters in case of normal distribution capability index calculation for non normal distributions itis to print in capability study list 3s percentiles instead of 4s percentiles HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 24 Control limit calculation for acceptance chart in case of Tool Change and Tool Wear processes Upgrade Information Released 12 27 2006 nn en nn en nn en ee ee eee ee eines sed Release 5 5 6 TTT a E Database ua ray MPG Inbuilt Parser U21 U11_ Gauge Engine vise HNS SPC DataConnect vie HNS SPC IDConnect V1 6 Sound Engine ve Print Engine us E mail Engine E Alert Engine V1 5 Report Engine V1 5 Export Engine V1 2 i version of currently used database 1 DataConnect engine calculation of moving average range deviation samples fixed Released 03 06 2007 nee sed Release 5 5 7 aa EEEE EEEE EEEEEEEE a D xi Database VW ya j MPG Inbuilt Parser U22701 Gauge Engine vise HNS SPC DataConnect V1 9 HNS SPC IDConnect vio Sound Engine uae Print Engine V1 6 E mail Engine a Alert Engine us Report Engine V1 5 Export Engine V1 2 SZ version of currently used dat
33. correspond to the settings of the given process period preceding or following process period then the proper settings border as a breakpoint can be removed This way unnecessary becoming setting borders can be removed by the use of two new menu items of the Database menu E HNS SPC Access Level 3 ES HNS SPC Access Level 3 File Database Data Analysis MPG Dataloggers Settings Help File Database Data Analysis MPG Dataloggers Settings Help Factory Factory K _ 1 S N S Workgroup Machine Workgroup Machine Product Product Measured parameter Measured process Measured parameter Measured process Process settings Failure group Attributed process Process settings Failure group Attributed process Process settings Change After starting the menu item and selecting the suitable process checking of setting borders begins a nd the Checking of setting borders is under processing Please wait program removes the redundant setting borders breakpoints Removed borders Attention In this way removed setting borders can not be later restored 6 The printing error appearing on Windows 2K and XP operation systems is corrected The earlier version of the program printed deficiently the graphic forms on Windows 2K and XP because it printed certain parts of graphic illustration deficiently not with the correct colour and not with the proper
34. d samples were not saved in case of automatically saving Have been corrected Modification the displaying of control chart if LCL UCL Microsoft SQL Server reports for lognormal processes are fixed Elcometer 300 thickness gauge module modified to take it on the message failure Upgrade Information Released 09 28 2007 Database zra h MPG Inbuilt Parser U247V11 Gauge Engine vrsi HNS SPC DataConnect V118 HNS SPC IDConnect vio _ Sound Engine vie Print Engine us E mail Engine uz Alert Engine vus Report Engine uz Export Engine v1 3 ersion of currently used database New functions 1 Further file types are possible to use relative to pictures which are displayed in MPG instead of previous bmp and gpi file types Support of measuring program selection by typing initial characters of MPG name cursor will step to wanted MPG Possible setting that data input will start by MPG selection directly See Data inputs started automatically when MPG selected switch on Input Measuring sheet in MPG menu item of Settings menu Process Status Logging PSL in measuring program see PSL switch in MPG Editor together with Process Status Logging PSL enabled switch on Log Alert sheet in MGP menu item of Settings menu Size of SQL error message window can be changed whole message can be seen in one piece GG2 Digital Height Gauge has been added to list of supported gauges If printing and displayi
35. date Engine V1 6 V1 8 New functions 1 2 3 HNS SMUX 8 USBMUX 8 have been added to list of supported gauges Chatillon DF series of force gauges have been added to list of supported gauges On line upgrade Modification correction 4 In case of attributed processes the sample size input field is faulty in the Table menu item of the Process settings menu Fixed In the CTQ Capability OoC Report menu item of the Reports menu the percent values in the CL fields are faulty Fixed At the time range selection in the menu items of the Reports menu the explanation of the beginning and closing dates is faulty Fixed Head Tracking function is not operates Fixed At the MPG Create MPG Wizard menu item the program stops in some cases Fixed In the measurement windows the colour of the port and channel fields is modified If the measured value is modified in the measuring program subsequently the unit is not correct in some cases Fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC ERNE RPL DA ETN RUAN OY MO CME GRE PIE ME STR LIE EZ program Configuration Data E Upgrade Information Released 05 11 2010 Database v1 42 v12 version of currently used database E MPG Built in Parser v347u12 Gauge Engine
36. ding mail 4 The MPG Settings window was changed the setting possibilities that are a functional group were located on separate sheets in the settings window ES MPG Settings E E MPG Settings x InputzMeasuring Sample data Log Alert Others Input Measuring Sample data Log Alert Others M MPG data input process can be re started without closing MPG window shift T required automatically T Sample completed sound team T required automatically Operator required T automatically T Automatically saving of data on closing data input process mask I required automatically upper case letters can be entered T Warning window appears on OoS measurement T Sampling time can not be modified by the operator M Re measuring enabled tool T required automatically T Operator can change to manual input on gauge error Check and set your MPG configurations Check and set your MPG configurations HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC MPG Settings l G MPG Settings x Input Measuring Sample data ecu oia Dinars Input Measuring Sample data Log Alert Others gresencnsesencesenencssscnsesencnsessscnsesssoney L O Listing order in selection window e name creating time
37. f the window in the M INFO OoC DataConnection menu item of the Settings menu Fixed In case of Simplex Opto RS232 gauge the conversion function is not taken into account in the diagram which sings the actual value related to the tolerance limits in the measurement window Fixed Failures at the copying of the content of the configuration file Fixed Among the gauge control settings in the Gauges menu item of the Settings menu the borders of the validity range are not checked logically Modified In case of redirection of the configuration file also the file name has to be given in contrast to the documentation Modified the file name is not needed In the Default goals menu item of the Settings menu a checking has been built in related to the logical correctness of the given capability index values Cm Pp Cp gt Cmk Ppk Cpk The program stops during the printing of the capability study report in Q DAS format Fixed There is a failure in the Out of Control Middle Third detection in case of attributed control charts Fixed In the Alerts Scheduled tasks and running alerts menu item the program stops at the upgrading of the alert status matrix Fixed There is a failure in the checking of the Sampling Control service Fixed In the Calculations menu item of the Settings menu the Outstanding value Set value status automatically switch is not valid in case of data input by running a measuring program Fixed The outs
38. formation Publication date 30 4 2003 eee ee ee ee ee ee ee ee o e ee ee ee ee ee eB ee Be eB eB ee ee Be ee ee ee eB eB ee Be eB eB Be eB ee Be eB Be eB eB eB ee eB ee eB ee eB ee ee ee ee 1 1 E Program Configuration Data Database V1 5 MPG Inbuilt Parser V1 37V1L8 Gauge Engine Waa HNS SPC DataConnect U14 HNS SPC IDConnect vio 1 Print function fixed 2 Value conversion using HNS SMUxX interface is fixed 3 MPG file name conversion disabled 4 MPG data saving fixed Saving was failed when MPG has one attributing sample and data saved automatically Upgrade information Publication date 22 7 2003 I I A O gt S eb O 9r a A aA Program Configuration Data Database MPG 7 inbuilt Parser V1 3 V1 6 Gauge Engine V1 45 6 HNS SPC DataConnect V1 HNS SPC IDConnect V1 6 V1 5 urazu vase 4 1 Automatically RUN and TREND OoC analysis and displaying fixed 2 Sample data input window MPG fixed 3 New special gauge added to list of supported gauges VFLATNESS SPEC Motorised Flatness Gauges This new special gauge piece is rotated by in built motor in built HNS SMUX 4 Digimatic interface digital input and output bits to control the measuring process using PCI 1751 handles the special measuring hardware Upgrade information Publication date Build 2 September 2003 ee Database V1 6 MPG 7 inbuilt Parser v1 37 V1 8 Gauge Engine V1
39. ftp ftp HNS Gyor Hu HNS SPC 17 There is a failure in the calculation of Johnson transformation in case of using an individual moving average moving deviation moving range control chart Fixed 18 By defining a measured process by product program overwrites processes which have been already defined this can effected deleting of sub processes without a warning message Fixed 19 Program stops during checking a sample if there are not any Out of Control case in it in automatic alert function in case of MSSQL database Fixed 20 Sample which has been deleted from the database is not deleted from the alert status matrix in automatic alert function in case of dBase database Fixed 21 Time of the automatic control chart refreshing is too long in dBase database Fixed 22 Handling of Mecmesin force gauge does not operate Fixed 23 Invalid date format message in case of copying some dBase databases Fixed 24 PCL1761 card taking external foot switch does not operate Fixed 25 Scales of the displayed histogram and actual and ideal density diagram compared to each other have been modified Upgrade Information Released 07 16 2008 nee pad Release 5 5 12 ESEER ERE EE ELEE ET ETE EEE EEE EE EEE DEDEDE EEE ne anne nn E Database TRT v1 12 IR MPG Built in Parser U277U12 O Gauge Engine uea HNS SPC DataConnect T HNS SPC IDConnect uae Print Engine us E mail Engine u3 Alert
40. ftp HNS Gyor Hu HNS SPC The mailer function of the program have to be configured before it can be used Go to the Settings menu and select the E mail item The next dialogue will be appeared to make configuration determined by your network infrastructure Test gt gt oy SMTP server hns gyor hul Sender name hns SPC 4 MV Append computer name after the sender name Iv Hppend MFU name after the S5SUDJEcCt text MPG alert function enabled Subject Alert Test lt lt Cancel o V Append MPG name after the subject text Mail to xy hns gyor hu Send testing mail Test gt gt Cancel x Set configuration parameters used to sending mail Set configuration parameters used to sending mail You can use this function if you have an on line SMTP server connection on the PC runs the SPC program This SMTP server can configured for the program by its name or by its IP address In the second line you can set a free text used as the sender name in the sent mail You can extend the sender name with the name of the machine sends the alert mail In the subject section of the window can be enabled or disabled the MPG alerting function and can be set alert mail subject text To check your settings and working of mail feature use Test button to open lower section of settings window Enter a valid mail address and click on Send testing mail button The program attempts to send a mail to this address
41. g MPG settings The Sample data window lists second maximum and second minimum values of current sample Removing of archived samples is disabled when SQL database used This feature can be accessed using xBase type database Closed 02 11 2002 Upgrade Information Marker function added to measurement diagram Marker can be placed and removed using measured value diagrams Using like control charts MPG functionality is extended with specially filtered operator s diagrams The operator s measured value diagrams and control charts can be filtered automatically using operator entered team ID and or mask code Insert a new field into MPG header to enable automatically filtering MaskFilter and or TeamFilter These fields must be inserted as 2 and 4 field of 10 row of MPG header Another additional features are added to MPG You can override the global program settings for team ID and or mask code field inputs in MPG Insert new fields into MPG header to enable empty team and or empty mask code input s when program level MPG settings disable them EmptyMask and or EmptyTeam These fields must be inserted as 1 and 3 fields of 70 row of MPG header HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC The extended MPG header 1 row MPG name
42. g file that is made by the program in C directory in case of preparing a capability index diagram 9 By preparing a product certificate is changed the label on the View Print button according to the settings in the Print settings menu item in the File menu send to the printer list on the screen 10 Program breaks down in case of printing an attributed analysis Fixed 11 There are displayed C Cpk values instead of P Pp values on the capability index diagram Fixed 12 Last point on the capability index diagram is sometimes displayed on the first place Fixed 13 There are displayed in the data window on the capability index diagram only that statistical parameters mean and deviation which are used by calculating of given capability index 14 Displayed picture is not upgraded in case of attributed parameter by running a measuring program There is always displayed the picture which is related to the last measured parameter Fixed 15 In case of data input from keyboard if there is not written any measured value and data input is started by Measure button or Enter key program is read in a O value Fixed 16 There are slipped the days on the monthly capability index diagram because of conversion summer and winter time Fixed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu
43. g of peak of slow changed analog signal and Spec halogen lamp bulb measuring fixed problem with sound on end of measuring process 10 HNSSMUX4 SP1 gauge module fixed 11 Automatic OoC Alerting V5 4 255V5 5 1 See the User s Manual Upgrade Information Neer eet er ae Released 06 12 2005 zi Database va R vise MPG Inbuilt Parser U19 U11_ Gauge Engine vise HNS SPC DataConnect UL HNS SPC IDConnect vio Sound Engine vue Print Engine us E mail Engine viz Alert Engine van Report Engine l ua Export Engine V1 8 on of currently used database 1 Reports 2 Automatic data export See the User s Manual HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information Released 03 31 2006 HNS SPC V5 5 3 2 2 2222 eer c cere nn cae aC xi Database uaa uaa 7 MPG Inbuilt Parser Y1 97V11 Gauge Engine 158 6 HNS SPC DataConnect UL HNS SPC IDConnect vio Sound Engine ue Print Engine us E mail Engine I T Alert Engine uas Report Engine u3 Export Engine Ea Z version of currently used database Process creating is fixed process deleted when machine assigned to a parameter already related using xBase database Measured data import is fixed
44. hanged to manually input using keyboard on gauge error This feature can be disabled for operator Current factory can be selected changed directly from the log in window Export of attributed sample data fixed xBase database Setting of number of decimals changed Default file type changed from GPI to BMP in picture file browser windows Chart type and kind of chart selection fixed Password settings window changed Tool tips added DataConnect engine extent for handling attributed data MPG In built parser added to MPG engine User defined calculations can be use in S type command calculation can use sample average range deviation size number of rejected pieces etc MPG user can insert measuring command to MPG without process definition in the database Operator can measure parameter which is not defined in the database These measurements can be used in S type command to create result values Sizeable window handling changed Invalid appearing of negative values fixed it was operation system dependent Public configuration data can get form About window Handling of specification and process settings fixed SQL modifying of settings HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade In
45. indow menu is in reference to all opened analysis windows All opened analysis windows can be closed minimized restored and cascade by these menu items Window Help Close all windows Minimize all windows Restore all windows Cascade all windows In reference to all windows of the current sample range are defined the following operations minimize restore cascade In the under rows of the submenu are seen the windows which are opened for analysis These windows are marked with the following identifiers name of the analysis window header product parameter workgroup machine head position Seb eunent Reset selection Minimize Restore L azcade Frequency Diagram 1F 1T TEST 0 5F 55 55 56 Density Diagram 1F 1T TEST 0 5F 55 55 56 Note It is necessary a view with large resolution to using MDI windows It is proposed a view with resolution at least 1024x768 pixel to use this mode Every identifier of the process product parameter workgroup machine head or position identifiers is seen in the header of analysis windows in the following example is seen control chart relative to machine and separate for the first head of the machine ES Control Chart 1F 17 1 EST 0 5F 55 55 5G A O L FS Control Chart 11 17 TEST 0 5F 5S 5S 5G_1 0 Se ey PO O S s B _ 20 01118 19 98734 i 19 99990 J a a 19 98875 v LCL 0 01828 0 02806 UCL SPC xR Monitoring EIS pat haat Distribution eer 0 010390 gt NOT
46. ing fixed format in the measuring program Analysis functions have been enlarged the corrected nominal value and deviation based on 13 2008 VIII 8 NFGM FVM can be calculated and displayed Modifications and corrections T 10 11 12 13 14 The protocol of the HNS USBMUX multiplexers has been changed so also the program had to be modified Earlier program versions incorrectly manage the USBMUX multiplexers made after 10 06 2009 but new program version manages correctly both previous and new USBMUX multiplexers The RUN cases which are out of the control limit on the given side are not marked It is fixed Among the process settings of to the sampling control service in case of sampling by time the maximum limitation 60 minutes of the acceptable difference is removed If there are not enabled all of the gauges in the Gauges List menu item of the Settings menu a program failure occurs if a measuring program containing one or more measuring gauge is opened for editing It is fixed In case of creating a new attributed parameter there is a failure at the saving of the failure category settings related to the 2m language It is fixed Managing of MINFO OoC data is fixed Attributive processes were not displayed or were displayed faulty in the Data Alerts Alert states by processes menu item It is fixed In some cases the program can be hanged by running the measuring program and when the data stored
47. ly used database Logging in database archiving function MPG re measuring after gauge error in K Device strategy is fixed MPG gauge interface locking can be configured whole time of MPG using or under data inputs only MPG can be run with keyboard inputs only for testing or entering extra using PC is not a configured Measuring Station HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information Released 2006 08 31 iii xi Database Up ie V1 18 MPG Inbuilt Parser U2 0 U11 Gauge Engine 158 6 HNS SPC DataConnect V1 7 HNS SPC IDConnect vio Sound Engine l vue Print Engine V1 5 E mail Engine viz Alert Engine uas Report Engine V1 4 Export Engine V1 1 SZ version of currently used database 2006 08 17 Microsoft SQL database Report Engine fixed 2006 08 31 Teradyne Laser data loading function fixed for access level 1 Upgrade Information Released 2006 11 20 HNS SPC V Database ua 1 UG 15 MPG Inbuilt Parser TUZ Gauge Engine vise HNS SPC DataConnect UL HNS SPC IDConnect vio Sound Engine ua Print Engine use E mail Engine uz Alert Engine v1 5 Report Engine v1 5 Export Engine V1 2 version of currently used database New function
48. mached ag 3 10 2005 10 lnn a m lt gt 3 10 2005 10 0 55 z 0 00000 No 10 Date 3 10 2005 10 22 a m 19 9992 1 aa 10 22 a m lt gt 3 10 2005 10 22 a m X e ee 20 00180 Op lm 5 S 0 01154 Mask 12345676 gt U Date 3 10 2005 10 22 a mix 19 99990 Process is NOT stable Intervention X 2 Op lm Re Ue CP In Soe G Comment 0 02200 Mask 12345676 Dos ILo eee ejeje HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 18 XYZTEC tester XYZ TEC RS232 Data Out is suited The program is fit for receive measured values of the XYZTEC tester handle its measuring modes namely set from MPG automatically The mode appointed for measuring the given parameter should be defined in MPG Editor between the gauge settings in the Spec field ES MPG Editor Ea Header MS M MX S HU A AS A1L A2 AU E1 E2 Alert File Measure this parameters and store measurements Item 4 Pa fi Executing order fi M Database identified parameter M Store measurements l Chart automatically Gauge name selection XYZTEC Condor nyir teszter Remove XYZTEC RS232 Data Out A P f O lt lt direct Add Port Parameter Hoss IE geet 4 Es Select Channel Workgroup
49. ms supports the use of the earlier referring to HNS MUX 4 gauge measuring program in MPG editor and in automatic control chart displaying mode as only through a special set possibility You can refer to HNS MUX 4 in the measurement task by giving the LPTx logical address The program detected automatically to this logical address belonging physical address in case of the earlier operation systems On 2K XP new operation systems the assigning of logical physical address must be given by creating a Registry key which belongs to the program Key HKEY LOCAL MACHINE Software HNS SPC 5 4 Note LPT1 LPT2 or LPTS string value Karakterl nc szerkeszt se ME The physical address of the given LPT port must be Azonosit n v disclosed like decimal value as a value of the note LPT 278h 632 378h 888 3BCh 956 rt k ess 7 Note if we give the physical address of the port M gse properly and hardware compatibility exists then HNS MUX 4 gauge can be used hereafter on 2K and XP operation systems Attention In case of a program upgrading with simple change of files not with the run of install programme the earlier not used GET_IO DLL file must be copied in the program folder 5 The redundant seems like not used set limits of the measurement and attribute processes can be removed If we modify the settings of a period of a process in a way that after the modification the settings fully
50. n when the SPC MDC files contain the measurements of process in order of process identifiers Load process identifiers by files To be turned on when the SPC MDC files contain more process then the identifiable processes 9 Buttons of the attributed chart is fixed buttons are moved correctly when the chart window is resized HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 10 11 12 13 14 15 16 17 perrin aA Program Configuration Data x Sample data displaying display area size and the settings window are modified on the measured and the attributed charts The user using database terminology window can rename the shift fields same to mask team tool fields Selection menu of the attributed samples is fixed The handling of the Beginning date and Elapsed date buttons in the Date Range Settings window is fixed Displaying of the shift identifiers on the control charts is fixed in sample data area of the charts Control limit displaying is fixed on the acceptance type measured chart Automatic OoC detection in case of upper or lower sided specification is fixed on the acceptance type measured chart The chart and OoC settings windows handle correctly the appropriate checkboxes using the type of the current d
51. n be seen in the Select MPG modification using delete window PE NEIE wE EJ HNS SPC Select MPG x MPG name Product Ac lszegecs m r se 0l code hM t _iti Cs s sS a Sia Soe fe Haz min s t se draw num 123456 Strategy iA Product Comment Last using time 2005 84 07 fa7 23 Sampling rate r nk nt Pido Urga U E Close Select MPG from your list View MPG Log Delete the content of MPG Log View MPG Alert Log Delete the content of MPG Alert Log 8 The engagement of the processor generated by the program was developed The processor usage index was 100 by the run of the previous versions because the program used up all the available free processor time Note the program used up only the free processor time so the program did not distract processor capacity from other applications 9 MPG window can be closed by press down the ESC button to give assistance to the operator who works solely by keyboard HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 10 11 12 13 14 15 16 Printing error of the text list is corrected the program printed only header randomly Oracle database query which is necessary to view of control chart for measured p
52. nctions 1 2 Mettler AX MX UMX and Excellent scale family have been added to list of supported gauges User can use COM port selected in the Settings menu Gauges menu item by running the measuring program instead of COM port selected in the given measuring program See Settings menu MPG menu item Input Measuring sheet Hungarian Quality Product Award 2006 complement in the greetings window Previous measured values founded in the database will be included into the first sample to calculating moving average range standard deviation by selecting of measured processes in case of processes with x mx mR ms control chart It is possible to drop previous measured values in this case See Analysis menu Date range for analysis Modification correction 5 10 11 12 13 14 15 Colour of comments changed on the top of the MPG Editor window because of visibility See MPG menu Create menu item HNS MUX 4 interface has been deleted from list of supported gauges Correction the text of MPG error massage if it is a head and a position number together in an item Disabling the Automatic exports menu item in the Settings menu and Automatic export switch in the process settings in case of xBase database because automatic export function is not usable by xBase database Modification the legends in the Automatic export Service menu item in the Settings menu in the Exported fields part Column tittles of workgro
53. ng are set together relative to format of product certificate certificate will be first displayed than it will be printed only after validation Settings relative to format of product certificate are valid also for the lowest operator accessing level see Product function in Certificate menu item of Analysis menu A new setting in Capability Analysis and CTQ Capability OoC Report C C respectively Ppk Pp fields will be not red coloured if Cpk respectively P indices are correct see Reports item Settings menu item Modification correction 9 10 11 12 Median was calculated wrong in case of MSSQL2005 database if an outstanding value was in the given sample Have been corrected Failure in Capability Analysis Report by QS9000 type contents of LSL and USL fields had been reversed Has been corrected P and Pk respectively C and Car fields were not coloured in Capability Analysis Report Have been corrected TREND and RUN titles were not abbreviated in printed form of CTQ Capability OoC Report Have been corrected HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information Released 01 16 2008 Beet x Database visa vs MPG Inbuilt Parser Y25701 Gauge Engine v1620 HNS SPC DataConnect
54. ng to configure the SPC which is used by operators only password protection is enabled common passwords are used special setting is set in this case the program does not input the password and all user are logged on to the operator s level Client PC s clock can be automatically synchronised to the SQL server The synchronisation rate can be configured The default rate unit means minutes but it can be seconds using the follow special program settings in Registry see the manual of Special Settings Rate of Client Time Adjusting to SQL Server sec The clock synchronisation generates periodic network traffics The sample size data is changed to number of samples on the Certificate Navigation in the attributed data input window is changed TAB can be used the data can be entered without using of mouse Mask code handled correctly in the list of attributed samples length is changed for 8 to 16 Measured sample list window of the control chart are changed There are listed the following additional data average range deviation minimum maximum values value which is nearest to the sample average operator ID shift and team ID mask code tool code Click on a point of measured value in the diagram and the list will be positioned automatically Use the right mouse button to displaying the control chart of a sub process head or position chart The sample data displaying of the control charts can be configured see the Control Cha
55. ns the performing of the examination and the automatic status is enabled MPG the handling of size of sample has been modified The program gets the sample size and the number of measurements to be carried out from the database and later it does not use in the MPG file given sample size This enables the use of the same MPG file in that case as well when we change in the database the sample size in the given process or Xaverage Xi mX regulator card adjustment happens Note Because of the retaining of compatibility with earlier versions the format of MPG has not changed so the actual sample size by creating appears in the measuring task in the future too The cancelling of process definition the handling of Cancel button of window for process settings has been corrected The drawing of warning limits has been corrected The correction concerns special cases for example representing of faulty given stored warning limits OoC detection has been corrected The correction concerns that special case when the sample is out of tolerance but it is not out of control limits Earlier the program did not regarded it as a sign of OoC the upgrade detects already this case and sign it Represent of control chart has been corrected The program handled the uncovered display area during the re drawing of control charts in certain cases wrong Handling of Settings changes has been corrected In case of settings identity the pr
56. oduct which is set in mpg header but also for other product See MPG menu S item HeadTracking function was built in MPG editor This function allows of view control charts for heads and positions See MPG menu S item Enlargement the maximum length of user ID to 9 characters instead of 5 User can change the name of user ID See Settings menu Database terminology menu item User can change the default names of CTO types critical significant normal by measured parameters See Settings menu Database terminology menu item If user deletes measured samples by discrete setting program calculates the relevant moving average moving range and moving deviation values in control chart again User can choose in four ways how handles the program damaged measurements in automatic export function See Settings menu Automatic exports menu item Service function New possibility in archiving function it can be archive separate the dates of individual factories too See File menu Archiving menu New possibility in histogram calculation See Settings menu Calculations menu item Modification correction 20 21 22 23 Lognormal distribution distribution parameters display of density function Median range chart calculation of centreline and control limits Median deviation chart deleted Best Fit Tests calculation of Kolmogorov test calculation of Shapiro Wilk test for non normal distributions Ma
57. ogram compares only the actually used settings values for example while using automatic regulator limits the program do not take the unused fixed regulating limit values into consideration Applications task data have been corrected Among the task data appearing in the lower part of applications the print of value of under limited tolerance was wrong The representation of text lists on screen and the print of lists have been corrected The capability study sheet the list of data of capability index diagram and the list of certificate data have been corrected and modified Handling of diacritical marks in case of xBase database has been modified The compatibility options with earlier 5 3x versions have been removed The feed of 0 00007 0 00009 values has been corrected Earlier these values were handled faulty by the program The program prints besides the min max values also the average value on the parameter certificate The print of Q DAS format capability study sheet has been corrected HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 23 24 25 26 27 In the identifying part of the application the program used to print date time and quantity data in certain cases wrong The decimal and the separating mark the
58. ouble or one sided specification Upgrade information Publication date Build 17 Jun 2004 Database vue vue MPG Inbuilt Parser 1 47010 Gauge Engine 146 2 HNS SPC DataConnect VLG HNS SPC IDConnect vie Sound Engine V1 6 Z version of currently used database Handling of data collectors DP7 DP3 DT10 Starrett in case of Windows2K and XP operation systems is corrected Windows 2000 and XP operation systems are not in 100 compatible with the earlier Windows operation systems in the handling of the modem control lines of the PC serial line that s why the earlier versions of the program operated by these operation systems indicate error at the beginning of the read of data collectors The actual corrected program version is able for handling of data collectors and for read of their stored data in case of all operation systems The round of the measured values suitable for the number of set decimals is corrected In the earlier version of the program we modified the handling of the fed measured value by a rounding suitable for the set number of decimals the qualification of the measured values in the measurement result list of the MPG representation of numbers the classification of measured values corresponding with tolerance limit As a result of the modification an error depending on the PC hardware and operation system got in to the program This error was corrected by the whole replacing of
59. r Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 10 11 12 13 14 15 16 17 18 19 user password list consists a possibility for deleting users from all automatic alerts e mail address list in a step if a users e mail address is changed in user password list program changes the address also in automatic e mail address lists automatically Last two function is available only in SQL database See Settings menu Password menu item Personal sheet User can choose the possibility to display Z index instead of process capability index onto control chart By test of automatic alert criteria relative to low process capability can be used Z index instead of process capability index too See Settings menu Control chart menu item See Settings menu Automatic alerts menu item Service function The mark and value of centreline specification control and warning limits is displayed in its actual position as default These can be overlay each other Toward elimination of overlaying user can choose display in fix positions of marks and values See Analysis menu Analysis menu item Control chart function Density function is plotted for the whole range of screen so far it was plotted from minimum value to maximum value See Analysis menu Analysis menu item Density function New function was built in MPG editor user can create and save a sample from collected measured dates not only for pr
60. r external DATA button These externals can be used to trigger value loading from measuring gauges or gauge interfaces independent from the gauge or gauge Input bits of the card can be assigned to connected gauge or multiplexer interfaces Program supports different sound effect assigned the different measuring process actions Different sound effects can be assigned to the data loading from the gauges OoS status of the received measurement gauge communication error and sample completed MPG state WAV type sound files can be used The program uses PC speaker if no sound card installed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 4 mav Digital Tester ET S KMF force gauge supported 5 mav Digital Tester DIPM type force tester supported Upgrade information Publication date Build 28 March 2004 nee ical Erroaren coniguration Dats lt Database ua eer ip MPG Inbuilt Parser U1 4 U1 0 Gauge Engine v146 8 HNS SPC DataConnect V1 6 HNS SPC IDConnect vio SZ version of currently used database 1 DataConnect loading attributed samples ADC fixed 2 MSI support added Upgrade information Publication date Build 8 May 2004 pees See ee ee ee a screennames x Database ve we Ix MPG
61. rsions used product certificate is available in the future too but new function added to make certificate separately for a selected parameter of a product The printed certificate can be DIN EN 10204 standard compliant The constants not changed information e g company name address header extension text static comment section Signature are configured with appropriate level 3 access rights Programme loads identifiers from database to print on certificate Specification data can be load from database but can be entered manually by operator Results printed on certificate are calculated using data saved in database LOT can be attributed by programme using minimum maximum values and the specification or quality state can be checked by operator Other fields of the certificate can be filled by operator before begins printing e g quantity date of production inspector title Certificate can be printed in English and in Hungarian language to print can be selected by operator 6 Elcometer 300 B SP supported as simple gauge Elcometer 300 Coating Thickness Gauge is added to the list of supported gauges The B Basic and the ST Statistic Printer versions too can be used as a simple gauge connected to PC using a serial line interface 7 Elcometer 300 SP supported as data logger Elcometer 300 SP Statistical Printer can be
62. rt Settings item of Settings menu One instance of the program can be used multiple program running is disabled This default feature can be disabled using a special program setting The attributed data can be printed into the Certificate Capability indexes and failures data can be enabled or disabled supported with SQL database only The sample selection windows both of measured and attributed samples can be configured to sort the samples using the mask code see the first item in the Analysis menu There is a new menu point to remove samples from the database using date and time time range can be removed from the database supported in the SQL database only The capability data of the Certificate can be listed to the screen not to the printer only See the Print settings item of File menu The data copying from xBase to SQL can be configured measured samples attributed samples There is a new warning window if the operator close the MPG window before collected data are saved Sound effect when out of specification measurements are entered New special measuring mode added to HNS SMUX4 interface Gauge code HNSSMUX4 SP1 Measured value M M M M M 0 1 ane i Maai ohn chn 3 HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 33 34 35
63. s New surface to functions in Database menu wherein user can view in a table definitions and settings stored in the database User can from here add a new item to database modify or delete an item Here is a new function user can copy database items too See Database menu Table functions New Out of Control strategies See Database menu Process settings menu item OoC function New automatic alert criteria See Database menu Process settings menu item Alert settings function Insertion the Johnson transformation which transforms non normal dates in normal distribution See Database menu Process settings menu item Reports can be exported directly to MS Excel file See Reports menu User can make report template which consists settings of the report By means of report templates user can make a report with same settings only time range must be set See Reports menu Possibility for copying in user password list User can copy into selected factory the dates of users from an other factory See Settings menu Password menu item Personal sheet Add user function Automatic alert e mail address lists can be handled from user password list if a user is deleted from user password list program deletes the user also from automatic alert e mail address lists automatically HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyo
64. s displayed the start time instead of end time in printed capability index diagram in time period field Fixed 12 Calculate capability indices by QS9000 formula switch that can be found in Calculations menu item of Settings menu will be switched on as default 13 There is written control instead of monitoring in capability study report in Q DAS format Fixed 14 Capability index calculation is incorrect in case of a process with Johnson transformation and mx mR ms control chart Fixed 15 There is a failure in the reports in case of displaying a capability index greater than 99 Corrected 16 There is a failure in case of printing a capability study report in HNS format in the last column of measured values Fixed 17 Itis deleted the time h min setting by selecting the time period in case of preparing a capability index diagram 18 Recording of sample codes is faulty by HNS DataConnect function in case of choosing load process identifiers by files possibility Fixed 19 In case of deleting samples by date will be displayed a massage when deleting is performed HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNsS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 20 End of Inputs window misses in case of device strategy in the measuring program Fixed 21 False data input by HNS
65. specially assigned items and all especially not assigned items Using this feature means simple intervention handling When the operator set a marker using MPG functions he can extend the marker to all other samples of MPG only the same machine related samples This feature can be enabled or disabled in the marker input window The tool code field extended from 5 to 16 characters The factory delete function revised and optimised for speed xBase only The xBase database maintenance function revised and extend New gauge type supported OPTO RS Sylvac Mahr Tesa interface The team code field extended from 3 to 16 characters 10 Version of the currently used database can be queried using the About window SQL only because the database upgrading is automatically in xBase mode Upgrade information Publication date Build 19 January 2003 eee E Program Configuration Data Es Database ua wta g MPG Inbuilt Parser V1 4 V1 8 Gauge Engine v146 8 HNS SPC DataConnect VA HNS SPC IDConnect vio SZ versi version of currently used database Number of supported serial lines extent from 4 to 20 This feature makes possible to use up to 20 different serial line gauges and interfaces in a measuring station Also can be used up to 20 different serial line gauges in MPG External data triggering supported The program supports using of Advantech PCI 1767 digital O card to connect external foot pedal s o
66. tanding value detection has been modified in the measuring program HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 20 If the Control range must be in specification range switch in the Control chart menu item of the Settings menu is enabled and if the process mean is out of the specification range the control limit calculation is incorrect Fixed 21 Inthe Gauges menu item of the Settings menu the parallel port is removed 22 The report created in the Process Setting menu item of the Reports menu contains also the control chart and the Out of Control settings in case of machine capability study Modified 23 On the Batch sheet in the Archiving menu item of the File menu the beginning and closing date entry fields are not obvious Modified 24 The gauge checking is faulty if there is a conversion function in the measuring program Fixed Upgrade Information Released 03 31 2009 1 Release 6 5 14 0 s2 ssn ross nsssnnsnsssnssnansascsssanssscsssansans times Database vaz viaz MPG Built in Parser u297u12 Gauge Engine vresa HNS SPC DataConnect Ray HNS SPC IDConnect ua Print Engine vu E mail Engine f ua Alert Engine ew Report Engine ua Export Engine u3 Sample Control Engine uai On line Update Up
67. ted data Multiple pages printing fixed sizeable list window fixed Closed 06 12 2001 Upgrade Information MPG can be configured for accepting capital letters only in the input fields of mask code Drawing number is printed on Certificate Process selection menu fixed last used selection setting up automatically on next selection when sub processes used without main process Closed 06 22 2001 HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNsS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC Upgrade Information MPG can be interrupted and operator can re measure pieces if re measuring is enabled in MPG Settings operator level manual input window is fixed Database upgrade xBase V5 31 V5 4 function is fixed list of operator actions Handling of measured samples which have same sampling time is fixed this samples ordered by time of their physical storing New DataConnect feature added Program can assign sub process data to main process automatically This service can be enabled or disabled in DataConnect Settings Closed 08 24 2001 Upgrade Information A D card type selection is fixed in A D measurement settings Settings menu Gauges item Gauges Settings window Failure information is changed in initialisation window of A D peak of quickly changed process measuring mode Progr
68. that part of the program which operates the roundation The export into an Excel table of the measured samples marked for an analysis is corrected During the export the earlier version of the program wrote the title of the column of the Excel table false because the title of the column containing the outstanding status missed The handling of addresses of the parallel ports has changed only in the case of Windows2K and XP systems In Windows 2K and XP operation systems the handling of the physical addresses of parallel ports has changed that s why these operation systems from this point of view are not compatible with the earlier Windows operation systems The program detects the physical addresses of the parallel ports automatically during the run on the earlier operation systems and uses them during the handling of the HNS MUX 4 type gauges which can be connected to parallel port The appearance of the latest bi directional ECP EPP parallel ports hindered the use of these ports earlier as well because of the incompatibility of the new hardware with the original Centronics standard that s why we do not advice the use of these gauges hereafter The HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC program on the new operation syste
69. to analysis to sample lists of Data menu HKEY_LOCAL_MACHINE SOFTWARE HNS SPC 5 4 Use Date Range Settings for Sample List Enabled 5 Control charts and measured value diagram of MPG are fixed 6 You can assign a product to a machine in one step using by Product items of Measured and Attributed process of Database menu 7 HNS SMUX4 special measuring modes stability detectors configuration using Windows Registry entries fixed Closed 06 04 2002 Upgrade Information 1 Second level rights extended with text file export import 2 DataConnect fixed comment text when the sample can not be identified int the destination database 3 Sample calculation fixed 4 Drawing number length of product is extended 1625 5 DMX 1 fixed Closed 06 04 2002 HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNsS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC pose aes IRE CAE LINE ET E Program Configuration Data Upgrade Information Publication date 24 2 2003 Database us MPG Inbuilt Parser 1 37010 Gauge Engine v1 44 0 HNS SPC DataConnect 14 _ HNS SPC IDConnect vio _ E Sample finished sound changed sound on PC speaker New measuring mode added SMUX10_SP1 It can be used to measure flatness using variable number of Digimatic gauges Measured value Max Chn
70. ttp www HNS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC pases ea APN Reet aA hE PE i Ej Program Configuration Data J E Upgrade Information Released 12 16 2008 Database rr Es MPG Built in Parser U2 8 U1 2_ l Gauge Engine v1 65 HNS SPC DataConnect vaz HNS SPC IDConnect uae Print Engine vise E mail Engine u3 Alert Engine Eg Report Engine vise Export Engine u3 Sample Control Engine a on of currently used database New functions 1 2 3 4 The capability indices can be hidden among the statistical data in the product certificate Measuring programs can be created in a simplified entry window Gauge selection is simplified in the measuring program and in the gauge settings the gauges used at the given measuring workstation can be enabled in a separate list pre selection Generic Interface for Simple RS 232 Devices has been added to list of supported gauges Modification correction 5 6 10 11 12 13 14 15 16 17 18 19 Incorrect labels in the English program version Fixed On the Others sheet in the MPG menu item of the Settings menu the connection between some switches and the order of them is incorrect Fixed The Chart automatically switch can be enabled also in case of M items but there is no control chart applied related to these processes measurements are not stored Fixed The label is incorrect at the bottom o
71. up machine and product in the Measured process and Attributed process windows in the Database menu Process settings Table menu items were not updated according to database terminology Have been corrected Maximum 5 characters could be entered into User ID field in the Import menu items in the Data menu Have been corrected maximum 9 characters can be entered It could be entered only capital letters into the Shift and Team fields in the Filter conditions window Have been corrected The up and down arrows helping the seeing of measured values by sample size 6 or higher after data input in the MPG window did not operate in case of S item Have been corrected In case of post modification of measured values entered in the MS M MX item of the MPG with double click with left mouse button or one click with the right mouse button on the measured value in the list in the MGP window was not updated the corrected measured value in the S item Have been corrected Sample parameters sample average sample range sample standard deviation are not written relative to first not displayed points on x mx mR ms control charts HNS Technical Development Co Ltd Gesztenyefa 4 InnoNet Business Park Gy r H 9027 Hungary Phone 36 96 506 930 Fax 36 96 506 931 E mail Office HNS Gyor Hu http www HNsS Gyor Hu ftp ftp HNS Gyor Hu HNS SPC 16 17 18 19 4 i EEEE E E TTT i aA Program Configuration Data X Attribute
72. using the specified SMTP server and other settings The Status of the attempt will be appeared in the status bar below the mail address and sending controls The MPG alerting can be configured in each MPG so a new page added to the MPG Editor Header MS M MX s HU A AS A1 A2 au E1 E2 Alert File Iv Send E mail alert to address xy company com X Attr chart R s chart M Re measuring I Out of Specification measurement LCL under M LCL under MV Re attributing I Damaged measuring M UCL over M UCL over V Dropping data IV Aborting input MV close to CL IZ Close to CL M lower RUN V lower RUN M Violated distribution M Unacknowledged chart V upper RUN Z upper RUN Low capability Z TREND down I TREND down V TREND up V TREND up M Intervention C Comment Z Middle Third Middle Third l Log alerts gt e Alerting can be enabled by entering a recipient s mail address and selecting events to be monitored and reported Alert mail texts can be logged into a file with ALR extension and same name to the MPG file this is a simple text file 5 Screen list window changed Text lists can be screened with unlimited length 6 New data input mode for piece by piece attributing There are two data input mode for piece attributing in the MPG a failure found on the piece entering mode b piece OK by the failure piece NOK by the failure entering mode Sample size Failure Name Occurren
73. when data input of process configured for variable not constant sample size CL s can be calculated by changing size of samples or the average of changing size of samples The go to the last selectable sample function fixed 11 Displaying range of the control charts automatically set by the program operator can see and check whole range of samples previously the operator could see the control range only in the default displaying of charts More possibilities for displaying of control chart UCL LCL USL LSL and Max Min DataConnect new date format supported mm dd yy Program automatically detects the yyyy mm dd and the mm dd yy date formats Date formats can be used both in a DataConnect file Comment lines can be inserted into the DataConnect file All rows handled as comments which are started with 2 or character The DataConnect file can contains text comments by rows by measurements Program collects sample when loads measurements from the DataConnect file load rows and stores more measurements in a sample Text comments of measurements of stored samples are appended and stored in text comment field of sample It means the external measuring application can send comments by measurements Max length of stored text comments of sample is 120 characters Certificate can list the mask codes e g LOT numbers with their date range when the certificate created by dates from to and it contains capability and or attribu

Here

Contents

Download Pdf Manuals

Related Search

Related Contents