SELO-BFE - SECU Sicherheitsprodukte GmbH
Contents
1. In case you posses a safe with a fingerscan unit up to 20 users with fingerscan can be additionally stored Users with fingerscan are identified in the user list of the lock as USER xxx_FP The SELO BF electronics is the first safe electronics for which the opening based on fingerscan is certified At least two opening codes shall be entered to open the safe using fingerprint SELO BF and SELO BFE Another opening code must be entered in addition to fingerscan This can be either another Fingerscan SELO BF only but also a pin code or an additional E Key Allthe fingerscans are stored in the system with a value of 6 12 corresponding to a half value In order to acquire the authorization to open a value of at least 1 must be achieved A pin code with a value of at least 2 must be therefore entered for the opening a value of 1 can be also achieved with an additional fingerscan Attention The values can be adjusted only using additional software When the programming is made on the safe faceplate the pin code and the E Key are automatically assigned the value of 1 the fingerscan receives the value of Ve Attention For security reasons as related to programming using the software it is not allowed to communicate all the opening codes to a single user in case three opening codes are used value A fingerscan is 1 2 value B 1 3 value C 1 8 Example User A has defined his finger in the system as opening code it2. Sicherheitsprodukte Gmbh Electronic lock SELO B SELO BF SELO BFE 1 1 Generally Thank you for deciding for a safe with the SECU Sicherheitsprodukte SELO B SELO BF or SELO BFE 5 You have acquired a product meeting extremely high security requirements and developed and manufactured using the latest technical potential Please read the entire User Manual before programming and store it at a safe place for future reference The electronics is available in a version with a fingerscan unit SELO BF SELO BFE and in another version without the fingerscan unit SELO B The present user manual applies to both versions however the menu structure is able to detect automatically the appropriate version and thus only the menu items intended for it are active The items relevant only for the electronics with a fingerscan unit are marked with Generally you can open the safe in three possible ways e with a code SELO B SELO BF and SELO BFE e with an E Key SELO B 5 SELO BF and SELO BFE ident medium E Key not included in the delivery e with your fingerprint SELO BF and SELO BFE The administrator code when delivered from the factory is 123456 This code must be changed Additional 9 users with a code to be entered by the keyboard can be defined Such code has always six digits similarly to administrator s code Additionally up t0 250 E Keys for contactless opening can be stored
3. Save with the On key is displayed If a user with a value of 1 right to open alone should be created the message FS combination to be confirmed with ENTER must be followed by pressing the Function key If the user should be assigned access in combination with a fingerscan only this inquiry is to be confirmed with ENTER 4 Creating a user with an E Key e Press the On Enter key e The indication of Code Fingers is displayed e Press the Function key e The Change code menu is displayed e By pressing the key 2 reach the Administrator menu e Press the On Enter key e Admin setup Create user is displayed e Press the On Enter key e Create E Key is displayed e Press the On Enter key e At this point you are asked to enter the admin code factory setting 123456 e FS combination to be confirmed with ENTER is displayed Press the On Enter key and accordingly the Function key e User 00x Store E Key using ENTER is displayed e Press the On Enter key E Key in Prog mode continue with Enter is displayed e Press the On Enter key e After confirmation Save with the On key is displayed If a user with a value of 1 right to open alone should be created the message FS combination to be confirmed with ENTER must be followed by pressing the Function key If the user should be assigned access in combination with a fingerscan only this inquiry is to be confirmed with ENTER 5 Storing a user with fingerprint e Press
4. de modifications BA SELO B 2 SELO BF 2 and SELO BFE2 MD 07 2011 SECU Sicherheitsorodukte GmbH
5. the On Enter key e The indication of Code Fingers is displayed e Press the Function key e The Change code menu is displayed e By pressing the key 2 reach the Administrator menu e Press the On Enter key e Admin setup Create user is displayed e Press the On Enter key e By pressing the key 2 reach the Create fingerscan menu e Press the On Enter key e At this point you are asked to enter the admin code factory setting 123456 e The indication of Create fingerscan is displayed e The indication of Store finger is displayed e This procedure is repeated several times e After a successful entry the indication User xxx successfully created is displayed Sicherheitsprodukte GmbH Made in Germany www secu gmbh de SELO B SELO BF SELO BFE 4 Attention When saving a fingerprint it is important that the finger is laid evenly and in a straight position over the sensor Follow the instructions on the display The finger is saved only when it can be read in an optimum quality 6 Opening with fingerprint e Press the On Enter key e The indication of Code Fingerp is displayed e Move the saved finger over the sensor e Value not achieved is displayed e The Code Fingers indication is displayed e At this point enter an additional opening code not Fingerprint with electronic SELO BFE e The instruction Please turn knob is displayed In case following message Is displayed Value not achieved an additional Open
6. ase turn knob implies the action with the knob of the locking unit for which the opening code has been entered 2 Changing the administrator code e Press the On Enter key e The indication of Code Fingers is displayed e Press the Function key e The Change code menu is displayed e Press the On Enter key e The indication of Administrator is displayed e Press the On Enter key e The indication of the Old code is displayed e Enter the factory set code 123456 e Press the On Enter key e The indication of the New code is displayed e Enter the new code e Press the On Enter key e The indication of Repeat code is displayed e Enter the new code e Press the On Enter key e The indication of Code successfully changed is displayed 3 Creating a user with a code e Press the On Enter key e The indication of Code Fingers is displayed e Press the Function key e The Change code menu is displayed e By pressing the key 2 reach the Administrator menu e Press the On Enter key e Admin setup Create user is displayed e Press the On Enter key e Create code is displayed e Press the On Enter key e At this point you are asked to enter the admin code factory setting 123456 e The indication of User 00x is displayed e Please enter the user code and confirm it with ENTER e Press the On Enter key e FS combination to be confirmed with ENTER is displayed e Press the On Enter key and accordingly the Function key e After confirmation
7. e g dates of birth or other data for which a link can be derived to the code owner should be used for coding e If the code is stored in writing such document should be e consistently stored safely so that it is accessible only to the authorized persons Sicherheitsprodukte GmbH Made in Germany www secu gmbh de SELO B SELO BF SELO BFE 2 Attention Any changes of the administrator code and of the user codes shall be made with the safe door opened e When the locking system has been reset to another code this new code should be repeatedly used with the safe door opened 1 1 Description of basic functions You can program your lock based on the following description You can see the programming instructions on the display To program the lock enter into the menu please press the Function key when the symbol M is displayed You can move within the menu using the keys 1 scroll up symbol on display and 2 scroll down symbol on display When the symbol lt is displayed you can use the Function key to skip to the next higher menu level and choose a particular menu item using the Enter On key The battery symbol indicates the current battery status Wie Battery full m Battery empty please replace the batteries 1 2 Description of programming and user mode Please find the menu structure shown on the following pages Also the navigation is indicated Add
8. in a way allowing more surface area to place to the center and repeat Place your finger centrally over the sensor Sicherheitsprodukte GmbH Made in Germany www secu gmbh de SELO B SELO BF SELO BFE 5 1 5 Menu structure Menu Sicherheitsprodukte GmbH Made in Germany www secu gmbh de Input SELO B SELO BF SELO BFE 6 1 6 REPLACING THE BATTERIES As soon as the symbol depicting the battery condition indicates almost empty the operator is also warned Please replace batteries each time the lock is operated We recommend you heed the advice and change the batteries The lock can only be unblocked a further approximately 50 times Please note that none of the number codes can be changed until a set of fresh batteries has been fitted To change the batteries lift off the cover of the battery compartment with the tip of a screwdriver Fit three leak proof type Mignon LR6 AA alkaline batteries paying attention to the correct polarity Dispose of the old batteries in accordance with anti pollution legislation Sicherheitsprodukte GmbH Made in Germany www secu gmbh de SELO B SELO BF SELO BFE SECU Sicherheitsprodukte GmbH Wormgerm hle D 58540 Meinerzhagen Germany www secu gmbh de mail secu gmbh de Irrtum und nderungen vorbehalten Omissions and changes reserved Sous r serve de fautes d erreurs et
9. ing code shall be entered When the programming is made using the software only When programming using the safe electronics the indication Please use rotating knob is displayed already when the second opening code has been entered 7 Deleting a finger e Press the On Enter key e The indication of Code Fingers is displayed e Press the Function key e The Change code menu is displayed e By pressing the key 2 reach the Administrator menu e Press the On Enter key e Admin setup Create user is displayed e By pressing the key 2 reach the Admin setup Delete menu e Press the On Enter key e Delete user is displayed e Press the On Enter key e At this point you are asked to enter the admin code factory setting 123456 e Now you have to select the appropriate user by pressing the keys 1 or 2 e Press the On Enter key e The indication of Delete data to be confirmed with the On key is displayed e Press the On Enter key e The indication of Data record deleted is displayed Additional users can be deleted using the On Enter key By pressing the Function key you can reach higher menu levels up to the code entry 1 4 Error messages The following error messages are indicated when a finger is being saved or the safe opened too fast please repeat Move the finger more slowly over the sensor Move the finger straight over too aslant please repeat the sensor be read too short please repeat Move the finger over the sensor
10. itionally each of the menu items is clarified Code change menu Change of the administrator and user codes Language Sprache menu Language setup E Key synchronization menu In this program the channel of the E Key is adapted to the channel of the input unit This function is necessary when the radio channel of an input unit is modified although other radio keys with the old channel setup are still logged Info menu Indication of version and serial number SNA Lock serial number Administrator menu This includes all the menus that can be used only with the administrator authorizations They include 3 Create User Users can be created here A user has either a code or an E Key or both A separate user is always created for a fingerscan Anatomically there are people the fingerprints of whom are not sufficiently articulated for the system Assign E Key An E Key can be additionally assigned to a selected user here Delete Users and E Keys can be deleted here When a user is deleted also the code and the E Key belonging to the user are deleted When an E Key is deleted the user is retained To delete a fingerscan the corresponding user has to be deleted To delete all the fingerscans please use the FS Reset function see below Time Entry of the time and calibration of the clock The clock is automatically calibrated between two specific times Exceptions are a replacement of batteries and the switchover fr
11. om summer to winter time Date Entry of date Radio Channel The radio channel can be set up here 12 channels to select from This can be required when the radio channel is already used by another application e g WLAN In case of collision with WLAN systems a space of three channels is recommended Priority In case the door cannot be opened after several attempts with the E Key the priority of the door can be increased by this function Inversely also the priority of other door within the direct environment can be reduced Restructure The use of this function is recommended when several users have been deleted Register When either the lock unit or the keyboard is replaced the two units are newly tuned to each other FS Reset All the stored fingerprints are deleted however the corresponding users are retained Please select this menu and follow the instructions on the display also in case of repeated error functions related to the use of fingerscans Sicherheitsprodukte GmbH Made in Germany www secu gmbh de SELO B SELO BF SELO BFE 3 1 3 Detailed description of selected basic functions 1 Opening the safe using the factory code e Press the On Enter key The Code Fingers indication is displayed in case you possess electronics without fingerscan Code is displayed instead e Enter the factory set code 123456 e The instruction Please turn knob is displayed Attention The message Ple
12. s value is 1 This user can be still authorized in the system with an additional opening code with a value of 1 3 A user B now needs an additional opening code with a value of at least 1 3 If a code and or an E Key should be additionally assigned to a user with fingerscan it is to be created separately Inversely the fingerscan should be assigned separately to a user with a code and or an E Key To enable the use of additional functions such as time switching or calendar functions you need additional software Then you will be able to use the overall user administration Attention Should the user data in the safe electronics be administered using the software the data must be stored on a removable data carrier Their saving in a computer is not admissible is identified by the system and not allowed The removable data carrier should be stored at a safe place e g a safe after the programming In order to enhance the protection against intrusion the following points should be observed For locking systems with material code carriers e g an E Key e The code carrier should be consistently stored safely so that it is accessible only to the authorized persons In case of a loss of the code carrier the lock should be immediately replaced or converted to a new combination by changing the coding and or the code of the lost code carrier should be blocked deleted For locking systems requiring a code e No personal data
Download Pdf Manuals
Related Search