Home

SKF Analysis and Reporting Manager User Manual

1. Figure 6 17 Process Alarms Tab Number of Manual Entry Readings Enter the number of process alarm entries Manual Entry Click the scroll buttons to move to the next process alarm entry Type Select the type of alarm user defined or RPM Label Enter text for the process alarm label Units Enter the process alarm units Alarm Select the alarm type as Level In window or Out of window How to Save Test Template Settings Test Template settings are saved to the host computer s hard drive and then transferred by hand using ActiveSync to the instrument After completing a new test template s setup or after modifying the settings of an existing test template select the File menu s Save Save As option or click the toolbar s Save button to display the Save As dialog Using a descriptive filename save the Test Template to an appropriate folder on your hard drive The file is issued a ccs filename extension 6 16 SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support Trending of CTC Data Trending of CTC Data ARM allows you to trend your CTC results data by selecting two or more results files and combining the values from their band levels into a series of trend plots ARM makes it easy for you to manage this information by moving the selected results data stream files into a custom directory from which the trend is constructed A name is given to
2. SKF Analysis and Reporting Manager Reporting and Analysis Support Software Version 2 0 Part No 32296900 EN Revision A User Manual Copyright 2013 by SKF USA Inc All rights reserved 5271 Viewridge Court San Diego CA 92123 1841 USA Telephone 858 496 3400 Fax 858 496 3531 eEE Customer Service 1 800 523 7514 SKF USA Inc SKF is a registered trademark of the SKF Group All other trademarks are the property of their respective owners SKF 2013 The contents of this publication are the copyright of the publisher and may not be reproduced even extracts unless prior written permission is granted Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct indirect or consequential arising out of the use of the information contained herein SKF reserves the right to alter any part of this publication without prior notice Patents US 4 768 380 e US 5 679 900 e US 5 845 230 e US 5 854 553 e US 5 992 237 e US 6 006 164 e US 6 199 422 e US 6 202 491 e US 6 275 781 US 6 489 884 e US 6 513 386 e US 6 633 822 e US 6 789 025 US 6 792 360 e W0 2003 048714 e US 5 633 811 e US 5 870 699 e US 6 437 692 e US 7 103 511 US 7 697 492 Product Support Contact Information Product Support To request a Return Authorization Product Calibration or a Product Support Plan use the web page links
3. MAINTENANCE AND SUPPORT Licensor may provide you with support services related to the Software called Product Support Plan PSP services Use of PSP is governed by the policies and programs described in the PSP literature or other material from Licensor s Product Support Department hereinafter referred to as the PSP Policies that may be updated by Licensor from time to time If you select and pay for PSP the PSP Policies shall be specifically incorporated into this Agreement by this reference Licensee acknowledges that Licensor may use any technical information provided by Licensee in the course of receiving PSP services for Licensor s business purposes including for product support and development Licensor will not utilize such technical information ina manner that identifies Licensee CONFIDENTIAL INFORMATION Licensee agrees that the Software contains proprietary information including trade secrets know how and confidential information hereinafter referred to collectively as the Confidential Information that is the exclusive property of Licensor During the period this Agreement is in effect and at all times after its termination Licensee and its employees and agents shall maintain the confidentiality of the Confidential Information and shall not sell license publish display distribute disclose or otherwise make available the Confidential Information to any Person nor use the Confidential In
4. Peak value Select to report on the peak amplitude of the signature within the band Band power RSS Select to report on the band RSS power e Include band start center and end positions in the report item by enabling the following Lower abscissa value Upper abscissa value Show the middle or peak band abscissa value e Click Next You return to the Select report items page 7 8 SKF Analysis and Reporting Manager User Manual Reports Word Reports Word Reports Report Generator for Microsoft Word Export data and graphic plots to Microsoft Word documents using template files and bookmarks Design your document in Word and save it as a template file using bookmarks to place text or graphics then link these to a Word report in ARM ARM also comes bundled with a number of predefined templates and associated reports to use as examples or to get started You may also export to a blank document without using bookmarks a no bookmark report in this case a simple table of values is created with fields written in the order that the software exports them ARM generates Word reports using any version of Word 2000 and newer To generate a Word report from your data e Select the Reports menu s Word Report Generator Expert The Report Generator for Microsoft Word wizard launches and guides you through the steps necessary to create the reports Report Geeenabor for Microsott Works FFT from 404k PR PR CHT T A E Repo
5. Power spectrum from channel 1 Spectrum_CH2 Power spectrum from channel 2 PSD_CH1 Power spectral density process from channel 1 PSD_CH2 Power spectral density process from channel 2 TimeDomain_CH1 Time domain from channel 1 TimeDomain_CH2 Time domain from channel 2 CH1_Minus_CH2 Time domain channel 1 minus channel 2 Diff_CH1 Differentiated time domain from channel 1 Int_CH1 Integrated time domain from channel 1 Diff_CH2 Differentiated time domain from channel 2 Int_CH2 Integrated time domain from channel 2 ThirdOct_CH14 Third octave analysis from channel 1 FullOct_CH1 Octave analysis from channel 1 SKF Analysis and Reporting Manager 8 7 User Manual Import Export ASCII and Excel Import Wizard ThirdOct_CH2 Third octave analysis from channel 2 FullOct_CH2 Octave analysis from channel 2 TransferFn Transfer function Coherence Coherence CrossCorr Cross correlation CrossSpectrum Cross spectrum gt Ifyou are unsure about the process use ARM s default settings Restrictions caused by these selections are based on the analysis type For example if you choose a time domain process the vertical scale on output is restricted to magnitude or real values only integration is not available and the data cannot be placed on a map As you change these settings ARM automatically analyzes the import data to see if it fits and displays the results in the
6. The plot automatically reflects changes as they are made e Click Cancel to discard the changes SKF Analysis and Reporting Manager User Manual Plots Display Style Editor Display Style Editor General Tab The General tab defines the current fonts and colors of various plot elements Urplay stybe editar Gencial Signatuie Watedall Speactagiam Dibi Other 1 Here Defa drew sipia Han Font verdena E pt Edi joni babel font Jerdens amp pt Awalahe colours Giph beck geound Fiol backgroud Grid Ve aberfiall back wal ahefall kf wal W aheital Hoz at wadal band colo tada lz 25 B wi Z Er Figure 4 11 Display Style Editor General Tab Fields include Name Enter the name of the display style The name identifies the style when selecting display styles from the Select objects dialog Main font Displays the current font used for most labeling on plots Click Edit font to select a different typeface style and size Label font Displays the current font used for cursor labeling Click Edit font to select a different typeface style and size gt ARM ignores the color selection on the Edit font dialog since there are separate selections for color elsewhere gt Non TrueType fonts may not display properly Available colors Displays a list of each plot element A selected item s current color displays in the color panel below the Edit color button Click the Edit colo
7. Sask TOE ee et ee ee Pe ae ae ee PREFED OGEN Selta eats 2 ar pene PPS Pee i E Ch T oim i AY han CFI Pian crua Fi Tas ibs iims r E Be lee Bs b kaia fm EE E EH Tii oer OY ees ae Pe ee dee A as a A fa i yaa LEa i bas aap 1 ea a n j LIX Pa F F ms L t iT fies tg engl eee pt Hig ri i Axr Figure 5 21 Cepstrum Display a a PS TEL 2 ia ET bmm ed am ed See OT ee a Pe ee i age MY as ay a i aa mae Figure 5 22 Power Cepstrum Display PRENT SBD et eet a ae sidan erent a oe te E i ata act ae errant ror LE a E SKF Analysis and Reporting Manager User Manual Digital Signal Processing Cepstrum and Power Cepstrum Post Processing 205 Hiii Be j I 844 aana Up Fei 7 OEL i P Dii F oh fe ttt ee E PP eee PS See BS Se ere a E ee mir Figure 5 23 Power Spectrum Display To post process a spectrum into Cepstrum or power Cepstrum e On the left panel select the spectrum record you wish to process e Click DSP Post Processing and select an option The display updates to show the data processed using the selected option gt The available options depend on the level of item selected in the left panel The first level represents the entire data structure one or more sets of data the second level represents a single piece of data or measurement containing one or more channels of information and the third level represe
8. Transmissibility transmitted force applied force Transmissibility is either transmitted force applied force or transmitted velocity applied velocity i e across anti vibe mounts e Enable the Reverse Excitation Reference and Response nodes record 5 checkbox to swap the positions of the excitation reference and response nodes in record 5 of the Transfer Function file header upon creation This provides greater control over generation of mode shapes within the ICATS software gt You cannot write multiple records to ICATS format files UFF Direction Codes Code Definition 0 Scalar 1 x translation 2 y translation 3 z translation 4 x rotation 5 y rotation 6 z rotation 7 x translation 8 y translation 9 z translation A x rotation B y rotation C z rotation Enter Coordinates When analyzer data is processed into UFF files the user may manually specify the response and reference coordinate information written into the UFF file header This information comprises the direction code and number for the reference and response coordinates For the first record processed the values entered on the UFF Options Reference nodes tab display For all subsequent records the last values entered display e Click OK to continue 8 12 SKF Analysis and Reporting Manager User Manual Import Export UFF Options File Options On the File options dialog specify various options for ASCII file naming for processing
9. keyboard keys to expand or contract the active hierarchical structure The hierarchy organizes file types uploaded from the Microlog into groups Right panel The right panel displays the contents of the currently selected item in the left panel There are three available display options depending on the hierarchy level selected in the left panel e Source description Displays details of the selected group e List Displays a list of the records for the selected group or file SKF Analysis and Reporting Manager 2 1 User Manual General Window Operations Using the Main Window e Graph Displays a plot of the selected file fe Sh Anilyh md Hiper ling Moma Fie Edt Were OP Dpat Grech sports Tede hiap oe ee Bromine Ese Bim Bert Boe ioe ents ARARA OL i ees aaa Tira Daman CR Mir TIFE ROS TORIES Chancel E KUII 1 21 02 AF w HU i Pra P Balarea W ARB bii EE Praca rdnach srs RH baaki ows T Ea 2 E Does ela E Rg IRE HSTORES ee ara l yg avi i Direm DTA thd Conor ER IDUS n Figure 2 2 Graph Display Option The main window s menu bar contains commands for manipulating the data and the plot and controlling the program set up 2 2 SKF Analysis and Reporting Manager User Manual General Window Operations ARM Operational Overview ARM Operational Overview ARM performs two main operations e Uploading data e Viewing data Uploading Data Upload data from your Microlog using ARM s
10. Frewoed late Laan Fiata ferret TARAH 7 Appia sekected date and hirae Wwalue bo ai records Mohe tha the ongnal enmi date sc caphamj vil Hi be stibie n cerlsin obpect humma he dse pou Gan edit hese a the one pleaded on graph Hala Fiat changing thie dasini cause the gutomatic update Toutes bo infor pou thet thee a demes conmpeseed bo the wigna courte daa re this bike Ceci Chen ee Tae Figure 4 75 Global Editing Expert Record Date Time Page The current values display in the Record date and Record time controls e Change the dates as required The original date and time is visible in certain object summaries the date edited here is represented on plots Changing this date may cause the automatic update routines to inform you that there is a difference compared to the original source data the next time you open the associated data stream file e Click Next The Confirm page displays Global Editing Expert Confirm The Confirm page displays a summary of the selected global edits e Click Apply to proceed with the edit The Applying edit page displays 4 66 SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert Finished When the edit is complete the Finished page displays iloba editing expert Dem TATA Finished Charsgrsg the unas bo Enegdich forall waked cade in Thermo DATA _ ei A yakd records in Theme DATA has baan udsa Pime node fret ang neconds bo which the e
11. Net Jo Ome J Hoe Figure 4 64 Global Editing Expert Select Global Edit Page The following parameters are available X axis units For frequency domain data select Hz CPM or Orders High pass filter For frequency domain data apply a non destructive high pass filter or clear any existing filter setting Vertical axis scale For frequency domain data select linear or logarithmic vertical axis or to show phase real or imaginary values where available dB reference value For data displayed in Decibels select a reference value for the conversion to dBs dB range on graph For data displayed in Decibels select the range in dB used on the graph English Metric Select English or Metric units Detection When using standard units specify stored and required detection RMS Peak or Peak to Peak Integration Display data in Acceleration Velocity or Displacement Notes Apply notes to all records Record date Apply a selected date and time value to all records e Select the parameter to edit globally and click Next The relevant editor page displays SKF Analysis and Reporting Manager 4 55 User Manual Plots Global Editing Global Editing Expert X Axis Units The X axis units page allows you to select the x axis units to apply to all records in the selected data structure lobel editing expert Processed records from Demo DATA crested on IO M EJ W axis units Select he sacar u
12. A threshold cursor displays all lines in the signature or spectrum greater than or equal to a specified value To display a threshold cursor e Select the Cursor menu s Threshold cursor option or press Ctrl E A threshold cursor level dialog displays FFT from 13 Jan 2010 14 03 31 12800 lines X Enter the threshold cursor tevet Figure 4 46 Threshold Cursor Level Dialog e Enter the threshold cursor level and click OK Once you enter the level ARM redraws the plot with a cursor line at every signature line or spectral bin with a value at or above the specified level A listing of all of these lines showing the level and the frequency displays to the right of the plot Be Bii Grew mesi Tai pe wA Hpo a het ee ha Bg ow Ae fro PPT Frere Chansa i freer Ho frora Counrretd 1 ender FFT Fr Tara S Figure 4 47 Threshold Cursor Level To change the threshold cursor level e Select the Cursor menu s Threshold cursor level option 4 40 SKF Analysis and Reporting Manager User Manual Plots Cursors To remove the threshold cursor e Press Ctrl E again or select another cursor from the Cursor menu Order Cursor An order cursor displays on waterfall plots this comprises a number of fixed cursor lines running along the available orders in the waterfall spectra This is only available if the data includes a recorded speed value for example from the Run up Coast down module To display an order cursor e Select the Cursor men
13. Number of spectra or the Spacing You can do this manually by adjusting each field or you may use the Autofit feature to automatically calculate the spacing required The Autofit feature applies your selected sample length and number of spectra required to the number of samples in the waveform It automatically calculates the spacing to fit the required sample zones along the entire extent of the sample adjusting the spacing or overlap required gt This option is not available for the Delta time and Delta RPM options as the application automatically calculates the zones To apply the Autofit feature e Click the Autofit button A Confirm dialog displays and prompts you to apply these settings Confirm Figure 5 18 Confirm Dialog e Click Yes The new zones display on the waveform Average Results When enabled the Averaging checkbox allows you to create a single averaged spectrum from the waterfall When you click Process the required number of spectra is created then averaged together to produce a single spectrum gt This option is not available for the Delta time and Delta RPM options e Once you have specified the required values click Process The output waterfall displays in the lower panel SKF Analysis and Reporting Manager 5 15 User Manual Digital Signal Processing The Digital Signal Processing Window WU LGEE a aa aera aren Libis caii PH wy me an Ta ii TE KE aR Fig
14. Source dela F import bimp files from remcersble source fie cand wader L ro Xo 7 Heb Figure 9 7 Source Tab 9 8 SKF Analysis and Reporting Manager User Manual System Preferences Program Options Fields include Compare to data stream when opening Enable to allow ARM to compare the data in the original source data to the associated data stream file if available This only operates if a data stream file exists in the current data directory whose name is the same as that which would be generated using the automatic saving options set on the Program Options General tab If the program finds any differences it can take one of four possible actions which you can choose below Advise you source is different and ask for action ARM advises you that the source is different than the associated data stream file and offers you three choices the same as the following three options You can view a summary of all differences found Update any new or changed records into the stream ARM loads the data stream instead of the source You then have the choice of adding changed records to the end of the steam or overwriting any with the same name Set this using the If updating new or changed records do the following controls Ignore differences and continue to load source Any differences are ignored and the selected source data opens None of the settings from the data stream file such as notes cursors and
15. by integration for example the specified reference value displays in the new units of the record These settings apply only to data when it is displayed using the Decibel scale and are ignored in all other cases although the value is still written into the record e Click Next The Confirm page displays SKF Analysis and Reporting Manager 4 59 User Manual Plots Global Editing Global Editing Expert dB Range The dB range page specifies the Decibel range used for graph plotting in all records in the selected data structure lobe editing expert Dems TATA d range Diad Pa Diab tere permed hoe Grapher dipa Range 80 B Specity the asica range of he phot when using a bogatimi Darba dope caa A plod deia to SN det ange eer for deta in 32b bonat hora ber 0 200 ehib default so 160d Haal ou may chert any valua in claps of 1048 tating at 20 Figure 4 69 Global Editing Expert dB Range Page e Enter the range value required in the dB Range text box in steps of 10 dB the minimum value is 20 dB All plots default to an 80 dB range When magnifying or reducing the vertical scale on dB plots the vertical range does not change unlike in linear plots instead the displayed range increases or decreases by 10 dB Use the dB Range setting to zoom in on a specific range of values These settings apply only to data when it is displayed using the Decibel scale and are ignored in all other cases although the val
16. this wil make T possible for rods io sale This repat agaihiaten poua vant bo ug it bo raport on some olker data Hama dev een Eu Tou report cen induce soma or al ol the folowing iteme reste of Fe cet up of aach recon Ihat it bo be rapotted Cl Fecwd data Process nate E Spectum ASS C Fikes esting J Oeral heed O Recced notes Number of lines E Single ine repot Cl Sampe bandwidih t Bak La cose 2 Hee Figure 7 3 Definition of Report Page e Enter or edit the report name in the Name field This name is used to identify the report when selecting reports to display and also appears as the first line of the report e Select the general record information items to include in the report e Select the Single line report item to output report items to single lines e Click Next The Reference record page displays SKF Analysis and Reporting Manager User Manual Reports Reporting Expert Reporting Expert Reference Record On the Reference record page select a record to use as a reference when selecting signature lines or bands to use in the report s reporting items Reporting expert Processed records from ARM created om 30 May 2 EJ Reference record Tou may raed a record Irom the mouce dale shuchuie bo use as a refereno when selecting signsture ires or based bo uee in the regut Baconds se FFT from 40K PE PE Chl eae FFT trom Ch Aa FFT from 40K PEPE Chl base FFT iom Chi se FFT from 40K P
17. Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Grade Bands Tab Grade Bands settings determine the number and setup of the overall vibration measurements For example an acceleration spectrum is collected when using an accelerometer sensor Grade Bands settings specify how the acceleration spectrum is measured to provide an overall vibration reading s that is compared to grade levels on the instrument i e what frequency range is measured what detection type is used is the spectrum integrated into other vibration spectra and if so what are their overall vibration measurement settings Meesrerent Madora Picture PFT Corto Grade Labels Grace Bence 5 f reguecy Mode ree of Send ste Cenwe Spar Sages I Pee fro Figure 6 15 Grade Bands Tab Number of Bands Specify up to 64 overall vibration measurements bands to measure from the captured spectrum typically only one or two for most conformance tests A table below this field automatically displays a setup row for each band All measurements bands are simultaneously calculated and compared to test grade levels at each sensor location orientation Preset Bands This drop down list allows preset octave bands to be set up automatically Manual Band frequency extent to be entered by hand 1 1 Octave Automatically sets up 11 bands between 16 Hz and 16k Hz usin
18. Analysis and Reporting Manager 7 21 User Manual Reports Word Reports Overall4 Overall5 Overall6 The trend plots will attach to Graph1 and Graph2 no plots will generate for the single measurements following because there are no other GraphX bookmarks The single overall measurements following the two trend plots will attach to bookmarks Overall3 to Overall6 No overall values from the trend plots will output because there are no Overall1 and Overall2 bookmarks If you have a record containing two plots and you want to output it to a single document with two separate plots e Create a template containing numbered bookmarks with at least two GraphX bookmarks e Select the root of your data structure e On the Word Reporting Expert enable the Create a separate output for each channel trace option e Do not enable Create individual files for each record e Assign the first numbered graph bookmark to the Graph plot item in the report items list If you have a record containing two plots at the third level on the Explorer tree it is not possible to create two documents containing one plot each If you enable Create individual files for each record a single file is produced because in this context record means the second level node of which there is only one In this case you should move one of the individual third level objects to the root of the data structure by dragging with the mouse so that two object
19. Any changes made to the value in the Enter a high pass filter value control are not applied e Disable Apply this filter checkbox e Click OK SKF Analysis and Reporting Manager User Manual Plots Plots Overview Enter a dB Reference On the Enter a dB reference dialog specify any reference value in terms of the current units to be used in calculating the dB values Enter a dB reference value foe MOD10 1i Jf OK X Cancel Heb Figure 4 5 Enter a dB Reference Dialog e Enter a reference value e Click OK Enter a dB Range On the Enter a dB range dialog specify the dB range for any plot For plots using the Decibel scale ARM defaults to using an initial dB range on the plot matching the notional dynamic range of the Microlog typically 80 dB or 160 dB for 32 bit frequency response data Erter a dB range for MOD10 Figure 4 6 Enter a dB Range Dialog To set the dB range e Enter a positive number 20 or higher e Click OK gt When magnifying or reducing the vertical scale on dB plots the vertical range does not change unlike in linear plots Instead the displayed range goes up or down by 10 dB SKF Analysis and Reporting Manager 4 5 User Manual Plots Plots Overview Enter Speed On the Enter speed dialog specify the speed in rpm for plots showing data in frequency domain units in orders if the data was not originally captured using order tracking Burnp Data Machine Stopp
20. C Crows hee C Prospecetopreal ZA PA Gk j Cancel Her Figure 4 13 Display Style Editor Waterfall Tab Fields include Waterfall style area Line No color fill is added below the line Color filled Fills the area below the line with a specific color spectral fill on the general colors list gt If you want to distinguish more lines in an overlay plot in case of more than one spectrum you have to unselect this option Select Line instead SKF Analysis and Reporting Manager User Manual Plots Display Style Editor Color filled clear Fills the area below the line with the same color as the general graph area Color filled gradient Fills the area with the selected spectral fill color but changes to a gradient with the darkest at the back and white at the front Background area Clear Plots use the same background color as the general graph area Colored Plots use a separate color for the back and left walls and floor Cursor style area Single line Cursor line links the cursor point on each spectrum Double line Uses a thicker cursor line Short line Cursor line is a short vertical line standing on each cursor point Cross hair Uses a crosshair cursor on each spectrum Options area Single color line When enabled the waterfall uses the signature line color for all spectral lines If this item is disabled the six waterfall line colors defined on the General tab are used col
21. EXCEPT AS SET FORTH IN THIS SECTION 7 AND TO THE EXTENT PERMITTED BY APPLICABLE LAW ALL EXPRESS AND OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY MERCHANTABILITY OF A COMPUTER PROGRAM INFORMATIONAL CONTENT SYSTEM INTEGRATION FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT ARE HEREBY DISCLAIMED AND EXCLUDED BY LICENSOR b c The remedies set forth in this Section 7 are the exclusive remedies available to Licensee for any problem in the performance of the Software 8 LIMITATIONS ON LIABILITY a Limitations and Exclusions IN NO EVENT WILL LICENSOR BE LIABLE TO LICENSEE FOR ANY DIRECT INDIRECT INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHER SPECIAL DAMAGES LOST PROFITS OR LOSS OF INFORMATION SUFFERED BY LICENSEE ARISING OUT OF OR RELATED TO THIS AGREEMENT OR THE USE OF THE SOFTWARE FOR ALL CAUSES OF ACTION OF ANY KIND INCLUDING TORT CONTRACT NEGLIGENCE STRICT LIABILITY BREACH OF WARRANTY OR CONDITION AND STATUTORY EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE PRECEDING EXCLUSION AND DISCLAIMER OF DAMAGES SHALL APPLY TO ALL CLAIMS MADE BY LICENSEE RELATED TO OR ARISING OUT OF LICENSEE s USE OF THE SOFTWARE INCLUDING BUT NOT LIMITED TO CLAIMS ALLEGING THAT THE SOFTWARE OR ANY COMPONENT THEREOF FAILED OF ITS ESSENTIAL PURPOSE OR FAILED IN SOME OTHER RESPECT b Acknowledgment Licen
22. GlobalEGitin Guests cieesieeiciehsteccseacsntko sts Rolling Element Bearing Database Calculating gE Overall Limits eeceeeeeeeeee Digital Signal Processing Digital Signal ProceSSiNg ccccccscssssessseseseseseeees The Digital Signal Processing Window Cepstrum and Power Cepstrum Post Processing ia elicit Rraraniake DSP loolbarint ca nieaiiandankadmaee ann SKF Analysis and Reporting Manager User Manual TOC 1 TOC 2 Check to Conformance Module Support Check to Conformance Results Files CTC Setup Generator and File Manager Trending of CTC Datayscigdiseisaleeectecceiwe Reports Reporting Expert ccccccsccsssesesescsescsescseecseecees Word Reports aaa TEAN Creation of Templates for Word Reports Import Export Export Format ASCII UFF Excel Export Format HTML u ccccecesecesescscseseeceeeeens Export Format PDF ccccscscssesesesesesescseecseeeees ASCII and Excel Import Wizard ccceceeee WEF OPON Sina eA System Preferences Program OPptions cccccscscsssccsssescsescsescecseeeees Custom Toa bars mssansniennananeuiai Command Line Parameters Troubleshooting Restoring the Program Defaults DSP Troubleshooting cccceccsescsesesesesesceeeeees General Troubleshooting ccccecseseseseecseeeees SKF Analysis and Reporting Manager User Manual 1 About Analysis and Reporting Manager Software The Analysis and Reporti
23. Manager 2 3 User Manual General Window Operations Other Data Commands Transfer data Upload data from your Analysis and Reporting Manager Software Microlog data collector and display it in ARM Open a data file Open an existing ARM data stream or hex file or some other file type and display the data in ARM Tip of the day Display the Tip of the day window before opening the ARM main window Other Data Commands Use the following commands from the File Edit and DSP menus to manipulate your data some of these are also available from context menus over the left panel or plot Edit date and speed Edit the date time and speed value of the data Date values are stored at the trace level only all records are affected within the selected object gt The original date and time as captured still displays in certain object summaries gt Changing this date may cause the automatic update routines to inform you that there is a difference compared to the original source data the next time you open the associated data stream file Rename Rename any object in a data structure Reset Restores all graph settings engineering units and scaling options to their defaults when selecting a record or trace in the left panel View source Displays source data in a summary window Suitable source data includes hex data files ASCII UFF and Excel Reprocess Reprocesses the data from its original source and discards all displ
24. Manager 3 1 User Manual Data Transfer Mobile Device Viewer e An Options button allows you to set additional processing options Click to display the Mobile Device Options dialog After making any necessary changes click OK to return to the Mobile Device Viewer wizard s main window Mob be Lhewice Lanter Giate teenstened bon fre amaya in aan chosed in both ihe aiana hes amiin a bnsp dale sheers ile Then dialog slows pou lo choose mome additonal penra onions Ine your daa eee ansku es folloeang succestal hamle Hann e udire lor undoaded Check l conlomance CSV hes Epo data to one of the follossing file formate Ciesa mew abida lor aah terete Tukkie Hen Anshis dala Po xe Figure 3 2 Mobile Device Options Dialog Select options to process data uploaded from your Microlog Display data in main window after transfer When enabled ARM displays the transferred data in the main window Delete analyser files after successful transfer When enabled ARM deletes the files on the Microlog upon successful transfer Maintain folder structure for unloaded Check to conformance CSV files When enabled ARM maintains the Check to conformance results directory structure when uploading CCR files Export data to one of the following file formats When enabled ARM automatically exports the uploaded data to ASCII Excel or UFF file format Select the output file format to which you wish to export Create
25. Mobile Device Viewer wizard ARM automatically stores uploaded data in data files on your computer and updates them as you make changes You may override these settings for full control over data storage and updates When you exit ARM or close the hierarchy it automatically saves to its data file located in the ARM data directory Open the data file from the open history list to view your data again Viewing Data Viewing data in ARM allows you to plot the data graphically manipulate the data via scaling engineering units add notes and annotations to the data and export it in various forms including ASCII file and graphic bitmaps Export data and graphic plots to Microsoft Word documents using template files and bookmarks Design your document in Word and save it as a template file using bookmarks to place text or graphics then link these to a Word report in ARM Welcome Window From the Welcome window access the main program functions as follows Welcome ito SKE duals ard Keporting Manager SKF Analysis and GKF Reporting Manager Welcome bo SKF Analyse and Reporting Manager for the Mecrolog G2 Dranse data gt Gren a data fie zE Tip al tha day uppat lum 7 Hep Pitant Ghoose an Optom bom ore of ha abort bufona bo theat Fii window chek on Hae close boon i the kop ight or pray Alber a i Shea thes virala avay ime the appkcwtion slats Figure 2 3 Welcome Window SKF Analysis and Reporting
26. Orders you can enter a speed value to view data in Orders You may also set a high pass filter here defined in Hz Y axis Scale Select linear log dB log magnitude and real imaginary and phase scales you can also define a dB reference value and dB range for the vertical scale Engineering units Choose to display data that is in standard engineering units in English or Metric systems You can also define the detection settings of your data RMS Peak or Peak to peak Add integrations Select to apply Auto EUs to data not captured in that way originally and will integrate or differentiate the data accordingly SKF Analysis and Reporting Manager User Manual Plots Plots Overview RMS Peak and Peak to peak Select the detection setting of your data in RMS Peak or Peak to peak Integrate Select to integrate any frequency domain data that uses evenly spaced x axis values Differentiate Select to differentiate any frequency domain data that uses evenly spaced x axis values Zooming Access zooming and panning options or display the Enter axis range dialog to specify Scaling This submenu contains similar commands as for Zooming but applied to the vertical axis gt You can control both the horizontal and vertical display ranges by Ctrl dragging with the mouse on the plot A rectangle is continuously drawn displaying the ranges the numerical values show on the status panel upon release the plot redraw
27. Uhe Appi Ma ahenk bee bo Cho arii eating i beg ii Ghasck tby appip the lia pirg rhin Ceci Chen ee 7e Figure 4 66 Global Editing Expert High Pass Filter Page To apply a high pass filter e Enable the Apply filter checkbox e Enter a value for the high pass filter in the Filter starts at text box gt If you disable the Apply filter checkbox the value is ignored and the effects of the filter are canceled in all records filter frequency values remain in place These settings apply only to frequency domain data and are ignored in any time domain or notated x axis records e Click Next The Confirm page displays SKF Analysis and Reporting Manager 4 57 User Manual Plots Global Editing Global Editing Expert Vertical Scale The Vertical scale page applies a vertical axis scale to all records in the selected data structure lobe editing expert Dems TATA Vertical scale Select fhe verbal gear code ip ure in areg TE Longa magije D Phe J Log di D Log megnitude Imagenes Choo the sowie fo use on Pe anpliude frerticsl si You may Choos bssan ines reagritucie lnganthmac jca vaih Dacial vak o logan soaks eek negrtude values tthe daai k fea plrcrresgeruety ara ypa map aki Ghessem bhiin reall Teese on phare Figure 4 67 Global Editing Expert Vertical Scale Page The following parameters are available Linear magnitude Change the graph to display a linear plot of magnitudes Log d
28. User Manual Import Export UFF Options Enter the coordinate information manually for each record As each record is processed you must specify the coordinate information manually using the Enter Coordinates dialog When you select this option the Base input values on existing UFF information in record option activates Click to enable if you are exporting from records originally from UFF files This allows you to take the existing coordinate information from the original record and keep or modify it as required If left disabled you must modify the previous values used Specify a base setting and increment the coordinate values Specify the coordinate information to start with and select whether to automatically increment the reference or response number The first record processed takes the settings shown here all subsequent ones will take the same settings with one of the direction numbers incremented File Saving Tab On the File saving tab specify the naming options for the UFF files created UFF Options Aelerence nodes Fis ting ICATS Please tlagi hoe yi ead lha UPF dala ip ba tavad ba hie CE Indrvadual et aing the analetet record names gt kiida files tug a ret baid or the eden recon nikaa Ci white all records to asinge fhe CI Use custom emiersion bor UFF Lv OK x Cancel Figure 8 7 File Saving Tab Options include Individual files using the analyser record names Each record proces
29. a HE CTC Damo Data neat v 6 Two plane balance report Delete text report ssn 7 CTC Tabie vith graphs e9 Anabte 8 Nan tenplete balance report j Fie age 5 13 2013 4 37 16 PM Figure 7 25 Select Word Report Option SKF Analysis and Reporting Manager User Manual Reports Creation of Templates for Word Reports Output of CTC Data Special rules govern how CTC results are output to Microsoft Word reports CTC reports contain two things the CTC report which is a table of measurement results and status values and a set of spectral readings The CTC report can provide three output items to the document the results table the machine graphic and the multiple plot of the CSV results Alternatively you can choose to ignore the CTC results and simply output the individual spectral records like a standard report For CTC reports using a Word template three bookmark properties are available for the three output items In addition you can select the standard report template items but will only operate on the first record taken including its graph plot For non template reports the three CTC output items are output to a plain table and two stand alone images If selecting any standard report elements they will be output to the single document in sequence at the end one per spectrum in the CTC SKF Analysis and Reporting Manager 7 29 User Manual 8 Import Export Export Format ASCII UFF Excel ARM can export data to ASCII
30. annotations are loaded Ignore source and load data stream The data stream opens and all changed records in the source are ignored gt Enabling this option slows down the source opening operation this should not cause any noticeable delay However if the delay is too long you can disable this option In this case you must be aware of how all your data is stored Import binary files from removable source If enabled when you open a source directory on a removable drive containing binary files then all files in the directory copy to a new sub directory located within your specified binary files directory see the Program Options Directories tab for more information This new sub directory takes the same name as the directory in which the original files are located SKF Analysis and Reporting Manager 9 9 User Manual System Preferences Program Options Updates Reports Tab On the Updates Reports tab specify program updates and reports settings Program options heeg Fomating Sang Daa shesm i Roure Directories Fie options Setup Updates Repet Othe Finger update z Petocioaly check for papan wodeles Qheck for updates ever Check now rs CiS how the Flepeet llen options an Word Flapoting Erpet Check Gis contra bo whey the Aleport fen opti in the Aod Reporting Espa select thin ff pou wilh bo include ierdefined values generated from the data in your wod documents based on Enge of band value in
31. are available Note that the Balancer report does not actually use the third bookmark for the results table it is provided for support to other supplementary file types that contain only text data For non template reports the report items are output to a plain table The format of this table is based on your normal document template normal dot meaning you can customize its appearance by modifying your default table format gt In order to support future upgrades to the Balancer module the definition of the Balancer report fields are stored in a CSV file located in the ARM program directory called BalanceReport csv You can edit this file yourself to update the fields used in the report SKF Analysis and Reporting Manager User Manual Reports Word Reports Balancer Reports Polar Plot When generating a Balancer report using the Report Generator for Microsoft Word you can select to include a polar plot or a table view in the report To select to include a polar plot or table view in your Balancer report Select the Reports menu s Word Report Generator Expert The Report Generator for Microsoft Word wizard launches and guides you through the steps necessary to create the reports When you reach the Selection of fields and bookmarks page select the Graph or Table item in the Record fields column Select a bookmark from the Select bookmark drop down list The name of the selected bookmark appears next to the Graph or Ta
32. comes bundled with a number of predefined templates and associated reports that you can use as examples or to get you going gt For output to Word documents Microsoft Word must be installed correctly on your system and be registered as happens normally as an automation server ARM does not do the actual writing of the documents rather it controls Word invisibly to do this ARM will generate Word documents using any version of Word from Word 2000 on This document gives instructions on how to create templates in Word and add bookmarks to them Note that Word 2003 was used for the examples here other versions of Word may be slightly different but the principals remain You can also create Word documents without using templates with bookmarks in this case only simple tables and graphics are created based on your normal template Creating a Template dot When you create a new document using Microsoft Word the settings and properties for this new document are taken from a file called normal dot this file lives in a special place defined by Word itself If you want to customize how your default documents behave you can open this file and modify anything in it the normal font the paragraph spacing in fact anything that you can format in any Word document When you save the file keeping it as a template it will provide your own preferred settings for new documents Further than this you may create any number of te
33. communications Specify whether the data collector serial communications are shown DI 1100 DI 225 DI 460 Data Stream Tab Use the Data stream tab to specify how ARM behaves when opening previously saved data stream files This tab also contains a panel that lets you control WAV file buffering Program options Durechones Fie options Setup Updates Repat 5 her Gere Foemstting Sang Date sles Source When opare daa phas Ge z Compare to wuce ff available whan opening dala dieam Mas tthe soca hae charged do thee followin Of Advise wou source has changed and ask bor action G Update any rem or changed cadi igre changes and continua 2 Rakad 3 records digcsnding those in the dais cheam se bike be etre F Butter wee Hes over a soeched ace Ei ze 2000 C eo i Figure 9 2 Data Stream Tab Fields include Compare to source if available when opening data stream files Enable to allow ARM to compare the data in the file to the original source data if available ARM compares the number of records and their names to determine if any records present in the source are not SKF Analysis and Reporting Manager User Manual System Preferences Program Options present or are newer than records in the file If the program finds any differences it can take one of four possible actions which you can choose below Advise you source has changed and ask for action ARM advises you that the source is dif
34. defaults one of two ways delete the settings manually or use the instructions for clearing general program settings described below To delete the settings manually e Exit ARM and locate the ASP graph settings pgs file on your computer gt These files are located by default under All users Application data or Program Data in later versions of Windows e Delete this file The default settings are used the next time you run ARM To make the settings available to all users if using a networked version of ARM e Copy this file from the data directory and write it to the program directory overwriting the existing copy If your users then remove their local copies of this file the new default settings are used the next time they run ARM Word Reports Set Up Restore Word reports one of two ways delete the settings manually or use the instructions for clearing general program settings described below To delete the settings manually e Exit ARM and locate the ASP Word Reports XX wrs file in your computer where XX represents the current language ARM is running in e g EN for English DE for German etc This is because Word report setups are localized gt These files are located by default under All users Application data or Program Data in later versions of Windows e Delete this file The default settings are used the next time you run ARM To make the settings available to all users if using a networked version o
35. e Select the item from the Report items list and click Edit When you click New or Edit the Definition of report item page displays allowing you to define the report item When you have finished defining the report item ARM returns to the Select report items page Continue to create and edit report items as necessary e Click Next The report generates and displays SKF Analysis and Reporting Manager 7 5 User Manual Reports Reporting Expert Reporting Expert Definition of Report Item On the Definition of report item page enter a report item name and specify whether this item reports on a single signature value or on a band of values from the record Reporting expert Processed records from ARM created om 30 May 2 Definition of report item fou cen gve the epal bam a meme bo help pou danliy dunng edhing Hamer Reparl tem Repeat deme canbe configured bla repel an ether singe aguis values o an a band Singe signature lire report O Band report Figure 7 6 Definition of Report Item Page e Enter or edit the report item name in the Name field This name is used to identify the report item when editing reports in the program e Choose whether the report item is used to report on a single signature amplitude or on a band of values Single signature line report Select to report on the peak value or on a selected position Band report Select the lower and upper positions from a graph of the sign
36. for direct contact and support Product Sales For information on purchasing condition monitoring products services or customer support contact your local SKF sales office General Product Information For general product information i e product data sheet accessories catalog etc visit the Condition Monitoring Products page on SKF com and select the appropriate product link Technical Support Group Discuss review issues of specific interest with maintenance and reliability specialists from around the world at the SKF Knowledge Centre For technical support on issues like troubleshooting product installation troubleshooting product performance etc use our technical support web page to contact one of our Technical Support Groups Product Registration Please take a moment to register your product at www skf com cm register to receive exclusive benefits offered only to our registered customers including receiving technical support tracking your proof of ownership and staying informed about upgrades and special offers Please visit our website for more details on these benefits Tell us how we re doing It s important that you re satisfied with the quality of our product user manuals We appreciate your feedback if you have comments or suggestions for improvement please tell us how we re doing 091613js End User License Agreement THIS END USER LICENSE AGREEMENT this Agreement is ent
37. line and running to just below the top of the plot Full line Cursor line runs the full height of the plot Cross hair Diamond Circle and Square Cursor appears as the selected shape SKF Analysis and Reporting Manager 4 11 User Manual Plots Display Style Editor Options area Draw borders When enabled all plots are bound by a rectangle otherwise there are no border or grid lines and the plot background color is not used Draw analysis label Show record name Draw record date time Show overall level and Show spectrum RSS When enabled these labels are drawn at the top of the plot note that the program checks the available space and only outputs those that fit If the labels do not display increase the window s size or reduce the font s size Thick signature line When enabled a double width line plots the signature or waveform line Display Style Editor Waterfall Tab The Waterfall page defines the style used to draw waterfall or map plots Urplay stybe editor Gamall Sigiatwe ated Speacteagiam Qube ther 1 Mabet sipke pios Line E Singe colur bre E Colow filed E Colour code labels C Colow filled clam eee O Colow bled gad Mi enc Inds Each ground C Dra cursa tabels i Gea Di anishyus label Calbured F Show saeco rana Gursor ayie Cr fr Dane recond datestime L Singi ing Double ine El Show band power ina Ci Short bine F Show values on line
38. location Add Click to display the Select a bearing dialog and add bearings to the Bearing s selected list Remove Click to remove the highlighted bearing from the Bearing s selected list OK Click to apply the selected bearings defect frequencies to the frequency plot On the frequency plot each bearing overlay displays in its own color with dashed lines for each defect frequency Cancel Click to exit the Bearing selection dialog If you have made any changes you are prompted to save your changes Select a Bearing Dialog Use the Select a bearing dialog to import bearings from the bearing database and to add selected bearings to the Bearing s selected list on the Bearing selection dialog fe Select n Gearlog 19A checreri SEF 3909 SNGULAA CONTACT Dehra ii SEF 5200 ANGULAR DON TACT siai hequencies SEF S201 AHGULAA CONTACT Diri part SEF TAE ANG WLAN CONTACT Deira hapene SEF S00 AHGULAA CONTACT aired fecquericiet EJ SEF Bai ARGULAA DOM TACT Dashed hequercies SEF SAS AAG ULAR CONTACT Dairaj hegen SEF EIE 2NGULAA CONTACT Dashed ipa SEF SHT tha La OO Tact Daire Nequencey o SEF S008 2RGULAA CONTACT Dhikri fierce SEF TAR ANGULAR CONTACT sted Hequencies 3 cma P to Figure 4 80 Select a Bearing Dialog Fields include Display options taskbar Select how to display the list of imported bearings large icons small icons in a list or in a list with information about each item Summary button C
39. mmmm Displays the month as a full name January December using the strings given by the LongMonthNames global variable yy Displays the year as a two digit number 00 99 yyyy Displays the year as a four digit number 0000 9999 h Displays the hour without a leading zero 0 23 hh Displays the hour with a leading zero 00 23 n Displays the minute without a leading zero 0 59 nn Displays the minute with a leading zero 00 59 s Displays the second without a leading zero 0 59 ss Displays the second with a leading zero 00 59 z Displays the millisecond without a leading zero 0 999 zzz Displays the millisecond with a leading zero 000 999 am pm Uses the 12 hour clock for the preceding h or hh specifier and displays am for any hour before noon and pm for any hour after noon The am pm specifier can use lower upper or mixed case and the result displays accordingly a p Uses the 12 hour clock for the preceding h or hh specifier and displays a for any hour before noon and p for any hour after noon The a p specifier can use lower upper or mixed case and the result displays accordingly ampm Uses the 12 hour clock for the preceding h or hh specifier and displays the contents of the TimeAMString global variable for any hour before noon and the contents of the TimePMString global variable for any hour after noon xx xx Characters enclosed in single or double quotes are displayed as is and do n
40. need to have installed the following Windows software not on CD gt gt Download from Windows and USB drivers 1 Windows XP Active Sync Windows VISTA or Windows 7 Mobile Device Center 2 Install the CMC USB drivers from the corresponding folder on the CD and run them after installation gt Please note that these steps can take several minutes due to downloading updates several times from the Windows homepage Often this can be the reason why a communication between ARM and the handheld device fails You have to ensure that you have the latest updates on your PC in regards to Windows Please also refer to the handheld User Manual and the Quick Set up Guide inlay sheet within the ARM DVD box After successful installation and update download do the following for establishing a connection the first time e Plug in and plug out the USB connection to your computer e Change the USB port e Switch the handheld device On and Off Application Fails Due to Invalid Expired License Key During the installation of ARM you must enter a valid license key provided by SKF in order to enable ARM All license keys are maintained in a license key file alf and are maintained in the License Key Manager Make sure you have the license key on hand before starting the installation Product license keys have an embedded expiration date The expiration date gives a user the ability to operate ARM for a limited period of time When the license is abo
41. new sub folder for each transfer When enabled ARM writes each transfer to a new unique sub folder SKF Analysis and Reporting Manager User Manual Data Transfer Mobile Device Viewer e The File options button allows you to set up file export options Click to display the Export format for dialog After making any necessary changes click OK to return to the Mobile Device Options dialog e Click Next The Connection window displays where you can select files to upload from the Microlog and view the Microlog s status fe Mote Armion VeA Connected to SKF Microlog Anabyrer SEF hierdlng Arakan frrrerare version 330 peso Baki 3989 28 fies bound Fig unre Deectoy E 10 Jen 2010 11 50 58 cov 14 len 3007 03 22 I5 cs Anass VEL S00 HZ cow Zada ANF 1437 eee Anaya 13dan A010 14 03 eee 14 dan S000 10 48 30 ere 22 het SOS 13 33 Fhe fa Ded 00S 13 75 01 ere A Ted ATA 11 1A RA eee Click om Hest io ended sll hes to pour PC m eekeot thoes required Ca Cee Cae Figure 3 3 Mobile Device Viewer Connection Window SKF Analysis and Reporting Manager 3 3 User Manual Data Transfer Mobile Device Viewer Connection Mobile Device Viewer Connection When the Connection window displays ARM automatically attempts to establish a connection with your Microlog using ActiveSync If connection fails make sure your Microlog ActiveSync connection still exists Once connection is established ARM displays a list
42. of records into UFF file format and the location of various program setup files Propram options Geral _ Femnathing Saray Data shyam ETE Directories Fie options Selup Updates Fiepots Other C User custom file extension bor ASCII ihes Vou car cuairte the wap UFF lias ae poceptaj by chehung an the UFF options butia UFF optiota Shore begion of adtiona a hat fe Al utei application dala C Piagam dala dicia My doarmer C ihai CZE C Figure 8 9 Program Options File Options Tab ARM allows you to use the default record extensions as used in the analyzer when reading or writing ASCII files as follows e tra for Trace A records the first record in a map trace always has the extension tra e trb for Trace B records e wxx for the second and higher records in a map trace where xx represents the record number in the map To specify your own extensions e Enable the Use custom file extensions for ASCII files checkbox This activates the three controls Trace A Trace B and Map allowing you to enter your own extensions gt You must include the dot in the extension gt For the Map option only enter one character after the dot to leave room for ARM to add the two character number to the extension e g w02 Specify various options regarding creation and naming of UFF files created from analyzer records on the UFF Options dialog SKF Analysis and Reporting Manager 8 13 User Manual Import E
43. of all available files for upload in the list box Use the Source button to filter the types of files you would like to view when you change this selection the file list automatically updates i Mobile Device Viewer SF K E Conneried to SKF Microlog Annbyzer SEF Micining Ansyzer Araya vation 390 erino Buldi 9269 38 files bord Finse Direschony Ai 7 Source l ie 2010 01 5058 esy Araka w dnsipser fies 14 Jan IOT 03 22 Fi cow Aralprer Sedal ae Recorder fies VEL B00 HZ oys Arape A Chakipi flag 29 A 09 14S Bee Araia R Hesa y Bunuion down fies 13an 2070 14 03 F1 eee Fiecoider y PAP fies 14 dsn 2010 10 88 Sew Rleconde Handheld Baang fies 22 Oct 20S 13 93 38 wow Recondet MOMAOLUTE 22 Del 2009 13 75 01 ware Retmigai aaea 29 iet NA 1A A RS ae Fierrarda eed TD card Al Gasg i Chok on Mest to unload al files to pour FE of seleri those egued Clear Sources ii Back Het gt gt X cca Hep I Figure 3 4 Filter Types of Files Uploading Files from the Microlog To upload files from the Microlog e Select the files you wish to upload Select All Clear All Shift click and Ctrl click options are available for multiple selection e Tounload all displayed files leave all files unselected e Click Next The Data Transfer dialog displays upload progress 3 4 SKF Analysis and Reporting Manager User Manual Data Transfer Mobile Device Viewer Data Transfer Viewi
44. orientation Use arrow buttons to specify the sensor location whose grade levels you are specifying The table displays settings for the specified location Orientation Tabs Options are the labels specified on the Measurement Locations tab Select the sensor orientation tab whose grade levels you are specifying The table displays settings for the selected orientation Grade Level Table For the specified sensor location orientation displays grade level settings for each measurement band s grade ratings Click the cell whose setting you wish to modify and enter the new setting To facilitate quick setup right clicking on the table provides options for copying the selected grade level setting to other measurements locations or orientations To select a number of cells click on a start cell and then use the Shift key in conjunction with the arrow keys to make the selection which will be shaded blue SKF Analysis and Reporting Manager 6 15 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Process Alarms Tab The Process Alarms tab specifies the number of process measurement alarms and the label for each It allows the user to input manual entries such as pressures temperature RPM and voltage Small Motor 1 Measurement Machine Picture FFT Control Grade Labels Grade Bands Grace Soundaries Process Alarms Nuenber of Manual Entry Readings f Manusi Entry 1
45. pee pou wi be dr n a bet of the perbe gobs bii bine pou Shite ord pou mtd eibi thee pararet lo aprh When bnished yocani chock onthe Appi barton iy appir het el bo yau chat Hre Chek onthe Heri bullion to go bodes goal ol bet page Tow car cick on fre Het ened Blot bubra s an ime hp ie m change you seigi baloe appharg the edt Het l M O il Fi Hele Figure 4 63 Global Editing Expert Wizard To apply global edits using the Global editing expert wizard e Select the Edit menu s Global editing expert option The Global editing expert wizard introduction page displays e Click Next The Select global edit page displays SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert Select The Select global edit page displays a list of parameters to edit for all records in the selected data structure alobal editing expert Proccsed records from Demo DATA crested on FO M x Select global adit The Qofleang biel ha all of Fes paree pray rege esc phates in the date duets Olek omi o paemeder to ve niao babye sbot the pangmesher Cepeda unde C Enghs D Hij pass in O Detection C Vetoa it oae ihiepsion CI dE rimane vaka Co ae 7 dB range on E 3 Remi dsa Tou map Chocam bairsten He CPM ciai p a ancl onder Rios drat d the dats was not ogay caphaed uae diia pea val hares bo oped an ore hacio meray hang the Order tector opon winder the Graph Ha men ss Bock
46. polar plot or having the Cartesian plots alongside showing either the zoomed portion used for the orbit polar plot or the full signature length When you have the Cartesian plots alongside the orbit or polar plot you can move the special zoom lines the lines drawn on the Cartesian plot that show the range of the signature used to draw the orbit in order to zoom in on the relevant part of the orbit To set up orbit polar plot options e Select the Graph menu s Orbit polar options option e Zoom lines Use a pair of zoom lines drawn on the Cartesian plots to determine the portion used to plot the orbit polar plot To move these zoom lines e Press Ctrl and click drag the lines e Position the pointer over one of the lines to move a single line position the pointer between the lines to move both lines To move the lines using the keyboard e Press and hold Ctrl and use the left and right arrow buttons to move both zoom lines and Insert or Delete to increase or reduce the extent When displaying only the portion of the record used for the orbit polar plot the normal zoom commands for the Cartesian plots control the amount of data displayed in the orbit polar plot Use the Display Style editor to customize the appearance of orbit polar plots To change the channel 1 x probe angle for orbit plots e Select the Graph menu s Orbit options Probe angle option The probe angle is defined in degrees and is measured counterclockw
47. protection of computer programs and or source code d Person The term Person shall mean e lt an individual a partnership a company a corporation an association a joint stock company a trust a joint venture an unincorporated organization or a governmental entity or any department agency or political subdivision thereof Software The term Software shall mean the software application entitled Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite which is an application developed owned marketed and licensed by Licensor The term Software shall include the object code of Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other object code within the SKF ptitude family suite and any and all user manuals or other technical documentation authored by Licensor in connection with Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family The term Software includes any corrections bug fixes enhancements releases updates upgrades or other modifications including custom modifications to Software for Wir
48. records by the data s date Orbit Polar Plots ARM displays dual channel data as orbit or polar plots Orbit plots display synchronous time domain waveforms normally taken from two probes arranged radially at 90 degrees to one another in order to show the rotational behavior of the machine being monitored USEF inaia A Se iraha mie ft ver CEP Geert Gren Beers Toe rip E 285542 naa orb L crt r s Figure 4 33 Orbit Polar Plot Polar plots are circular plots used to show frequency domain data containing phase information Data is plotted using the amplitude and phase information in the data Configure orbit and polar plots to show only a portion between cursors of the record for focusing in on a single cycle of the orbit or a frequency phase region of interest When ARM displays orbit or polar data you may choose to show the orbit polar plot alone or with two Cartesian plots of individual channel data Set up the Cartesian plots to display either the entire record or the portion chosen for display in the orbit polar plot SKF Analysis and Reporting Manager 4 29 User Manual Plots Plot Types To switch to a polar plot e Choose Orbit polar plot from the Change plot type menu Similarly with two time domain signatures you can switch to an orbit plot by choosing the same command When an orbit or polar plot is shown a further submenu becomes active which lets you switch between showing only the orbit
49. required frequency range However if the measurement grade bands of interest are at the low frequency end measurement times can become excessive To combat this the user may use this parameter to improve measurement acquisition times The status area at the bottom of the FFT Control tab gives an estimate of the measurement acquisition time SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Save Options Sub Tab Meeswement Machine acare PPT Commo Gace shes Grace Doncs Gece Geurcteres Process Aisea Noma Gasetend Seve Coters Served Urets Acce g Figure 6 13 FFT Control Save Options Tab Saved Units When saving spectra to CSV this selects the desired FFT measurement units from the drop down list This can be the measurement units as specified on the Measurement tab or any derived integrated units Save Options Use this drop down list to specify when to save spectra to CSV The drop down list contains the list of grades as specified on the Grade Labels tab and effectively specifies which grade and above will cause the FFT to be saved to CSV For example if grades with labels A through D have been defined with A being the lowest green and D the highest red then setting this option to C will cause the instrument to only save FFTs if any of the defined grade bands have vibration levels falli
50. status panel at the bottom of the page The Import button enables when the parameters match what ARM finds in the data see Validating the Import Data e Click Import The Trace Process page displays Validating the Import Data The Import from file wizard allows you to view the contents of ASCII or Excel data files and specify how ARM interprets the data As you specify the format of the import data ARM checks the imported data against these settings to ensure they are logical and allow the data to be imported and displays the results in the status panel at the bottom of the page If all is well the number of lines of data displays in the status panel If an error occurs the status panel displays Error encountered analyzing source and the error message Possible error messages include Invalid first line for input The first line for input does not contain any valid numeric values Invalid number of columns in input The first line for input contains valid numeric values but there is not the expected number For instance you might have specified data in realt imaginary format but there are only two columns of data remember the X axis values are always required Invalid trace process selected There is a conflict between your specified X axis format and the trace process selected 8 8 SKF Analysis and Reporting Manager User Manual Import Export UFF Options UFF Options The UFF Options dialog allows you
51. style set up and you may edit it in the Display Style Editor The default display for a Transfer Function data set is the three stacked plots as shown in the example above you may display the data on a polar plot by selecting Graph Change plot type Orbit polar plot A polar plot hides the coherence plot and uses magnitude and phase plots to construct a polar plot ees ieks E E i oA i i Ea sd i x Se a a ji j j n i seama pm Sy TE a a ld oy hem fais z p g ar a LEE mE e Ar EET T rl Le ea a Gi gt Figure 4 39 Polar Plot 4 34 SKF Analysis and Reporting Manager User Manual Plots Plot Types To return to the original display e Select Graph Change plot type Multiple plot The amplitude and phase plots display e Select Graph Multiple plot Waterfall ranges to restore the coherence record Overlay Plots Overlay plots are very similar to waterfalls except they do not have an axis offset ip iam ei ek CEL JE ee LES ET oto he mele i a ruse T Figure 4 40 Overlay Plot Unlike waterfall plots overlay plots can display time series data in overlays SKF Analysis and Reporting Manager 4 35 User Manual Plots Plot Types Bets 448 68F6 ee a SL T Figure 4 41 Time Series Multiple Plots Multiple plots function similarly to single or dual signature plots but can contain any number of records each displayed in a separate plot ne
52. team fe which pobeblp conemonds bo the muce po as Shout io open C0 ocuments snd Settings kil Donme Anay snd Alepoting Hanaga dela DEM O22 HES bl conte dieen records Pisar indicts nhai pou wart bo dos Update org nis of changed recond Load the source data and ignore al opting in the data cheam C Load tha data citar bike ard gncie al daren in thie paac ucla nia a changed raconde do Lhe hokosia vente miming recorda thal use the same rame Add all changed seconds to the end Lice J x cance parcioneces Pte Figure 2 8 Difference between Source and Stream Dialog SKF Analysis and Reporting Manager 2 7 User Manual General Window Operations Select Path for Source Fields include Update any new or changed records Adds changed records to the end or overwrites any with the same name If opening a data stream file the extra records are loaded from the source and added to it If opening a source the extra records are added from the data stream Load the source data and ignore all settings in the data stream The source opens and overwrites all records in the data stream all settings such as notes cursors and annotations are lost Load the data stream file and ignore all differences in the source Differences in the source are ignored and the data stream file opens 2 8 SKF Analysis and Reporting Manager User Manual General Window Operations Print Preview Print Preview Use t
53. the same way as graph plots in the main application window gt Asthe FFT requires a number of lines of input that is equal to some power of two the routine may choose less than the entire waveform for its input data You can perform an unlimited amount of FFT processes in the Digital Signal Processing window ARM automatically saves each process Each time an FFT is created it is added to the list of outputs stored in memory The Record drop down list displays each FFT process record 3 Spectrum C41 0s to 12 8004 s Welch i E No Spectrum CH1 0 s to 12 5004 5 Hanning 2 Spectrum CH1 0s to 12 5094 s Rectangular jecirum CH1 05 to 12 8004 s Wekh Figure 5 5 Record Drop Down List Jo e To view previous FFT outputs select an FFT output record from the Record drop down list e Toremove an FFT output select an FFT output record from the Record drop down list and click Delete e To adda note to each record as it is viewed click the Notes button to display the Enter notes dialog e When you have finished your analysis click OK to save all of the results e To exit the Digital Signal Processing window without saving any of the created records click the Close X button at the top right or press Alt F4 gt Specify how to output processed data created as new records in Program Options Other If you chose to save to a new data structure on the main window this displays in the main windo
54. the object to a new window Delete Ihe curent object Display CTC tr Display alend plot of check lo conformance resus sets B En Qlose the pogam 4 gt To add a button to a toolbar crag tha command fram the fist box onto the toober dropping ai the postion required To move a button from a toolbar right click on k and select Remove Fix Figure 9 11 Toolbar Set Up Dialog To place a command e Drag the command from the list box to the toolbar dropping it at the position required To see a different category e Select the category from the Select a category drop down list gt Select the All commands option to show all commands available To remove an existing button from a toolbar e Right click the toolbar button e Click Remove SKF Analysis and Reporting Manager User Manual System Preferences Custom Toolbars DSP Toolbar Access the DSP functions from the DSP toolbar Default buttons include Process Allows you to choose a post processing option or switch between the states Cepstrum Power Cepstrum Power Spectrum or None A check displays next to the active state DSP Window Launches the DSP Window Quick FFT Performs a simple FFT on the selected data using the default parameters as set on this toolbar Quick gE Creates an enveloped analysis for the selected data using the gE settings from the DSP window Quick Waterfall Creates a simple waterfall from the selected dat
55. the right and left cursor keys to move the harmonics in small steps with the lowest harmonic moving one spectral line at a time and the remainder moving in proportional increments of this To remove the harm tune cursor e Press Ctrl T again or use the Cursor menu to switch to another cursor style Power Cursor The power cursor is available on Cartesian and waterfall plots and is comprised of two cursor lines with the power of the band between these lines shown on the plot rather than the single cursor POINT value The power is calculated from the spectral RSS root sum square of the values between and including the bounding cursor lines To display a power cursor e Select the Cursor menu s Power cursor SKF Analysis and Reporting Manager User Manual Plots Cursors a bie serrina i Are ias ias heg boy dai pO hrs gi ican Fi irae dete raea erg fos F Bs bide oe Figure 4 52 Power Cursor gt The power value calculated is not exactly the RSS of the values between the cursor lines since an FFT window factor is applied to the result to compensate for the effects of the FFT window used to filter out end effects on the sample before analysis e On Cartesian plots move one of the bounding lines initially the right hand one using normal cursor commands As you move the line the power value recalculates To control the other bounding line position the mouse over it and Ctrl click the line e On waterfal
56. the zoom using the mouse e Double click in the area immediately below the x axis 4 20 SKF Analysis and Reporting Manager User Manual Plots Zooming Entering the Zoom Values Directly To type in a required zoom e Click the Specify zoom option from the Graph Zooming menu The Set horizontal range dialog displays allowing you to enter the start and end zoom positions set horizontal range for TESTO EJ Stat Eng Cc o Erter values in range 0 lo 200 EEA EEA ae Figure 4 21 Set Horizontal Range Dialog Zoom Indicator An optional zoom indicator displays in the top left corner of each plot and shows the extent of the current zoom Time Deman CH1 Aesan TESTITAA Tire Doman CHI Zi Jan 2000 HN Figure 4 22 Zoom Indicator e Enable the zoom indicator in the Display Style Editor s Axes tab Panning e When zoomed in on a plot you may pan the zoom to the left and right using the Graph Zooming menu s Pan left or Pan right options or by pressing Ctrl L or Ctrl R e To reset to the full display double click the zoom indicator SKF Analysis and Reporting Manager 4 21 User Manual Plots Plot Types Scaling The Graph menu s Scaling options allow you to changing the vertical scale of the plot All plot types may be scaled To magnify the plot e Click Magnify or press the M key or the up arrow on the keyboard gt Note that all vertical scales move along a 2 5 10 scaling step To redu
57. will not be able to save from the other To save the data directly to an ARM data stream file e Select the File menu s Save as option Choose Records to Include On the Choose records to include dialog select which traces to include in the multiple display for the current record i Choose records to include im display tor Channel 1 waterfall Spain CH Psio TENGI Hanming 13 4or 2007 2HE 2 Spectum CH1 08796 to 1 09062 a Hanning 13Apr 2007 D 2 Spatium CH1 1 01953 bo 1 SRS s Haning J for 07 M 22 Spectrum CHI 1 52330 boll OPS g Haney 134r S007 On Spechum CH1 207305 bo 1 430677 s Hanning 13 Aor 2007 01 2 Speech CH1 Z MSHS bo 0 SHA t Harg 1a See 2007 1 2 t Spectrum CH1 3 06059 a bo 1 45800 5 Heng 11 Ap 2007 M 21 Speci LHI 350935 sho 1 SRS t Harring 19 Ap 2007 2 x FFT Foor Charee 1 Spectum CH 4 07213 abo 2477 P25 Neng 13 Ap 2007 h a FFT From Chanel 1 t Spectum CH1 4 55703 sip 2 W70 s Hanning 1 Ape 2007 01 2 ma FET Ferr Chere 1 Sect OH ATRA ba Ae Hann 19 Se ST ia v E x Cancel Hen Figure 4 9 Choose Records to Include Dialog a 2 4 gt 2 ka To include a record in the plot e Select the Graph menu s Multiple plot ranges option The Choose records to include dialog displays e Select at least one record Use the standard Windows multiple selection commands to make your choices e Click OK SKF Analysis and Report
58. 2 SKF Analysis and Reporting Manager User Manual Plots Cursors a ia a a h no of 8 tl 28488 a 8 Soren Gewlpwe men eters Lay t Figure 4 50 Difference Cursor When a difference cursor is active you can move one of the reference lines initially the right hand one using the normal cursor commands As you move the line the difference value recalculates To control the other reference line e Position the mouse over it and Ctrl click the line To remove the difference cursor e Press Ctrl R again or select another cursor from the Cursor menu Harmonic Tune Cursor The harmonic tune harm tune cursor is similar to the harmonic cursor except that the root is the upper frequency of the harmonic range To initiate a harm tune cursor e Select the Graph Cursor Harm tune cursor option or press Ctrl T The cursor changes to display harmonics of the current cursor position in a downward direction dividing the frequency range up to the cursor location into the number of steps SKF Analysis and Reporting Manager 4 43 User Manual Plots Cursors Mr Ast pme re ore pg ig Cah Heig Lang fi 82 2 68 a Ei eee ra E Aa ET Amm al Fo Figure 4 51 Harm Tune Cursor To add or subtract harmonics e Select the Add harmonic and Remove harmonic options on the Cursor menu which display when the harmonic cursor is activated Or e Press the Insert or Delete keys on the keyboard Press
59. 4 26 SKF Analysis and Reporting Manager User Manual Plots Plot Types i Please choose a Axis annotation Figure 4 29 Please Choose a Z Axis Annotation Window gt If you are using proportional z axis spacing in your waterfall plot changing this changes the appearance of the plot To change your waterfall plot proportional z axis spacing option e Click Graph Display styles Edit display style The Display style editor window displays e On the Waterfall tab enable the Proportional Z Axis option Urplay stybe editar Wahati sipke Options C Line E Single colour bine Colow filed E Colour code labels C Colow hied clem E Drava walle Background CI Drew curse labels Clea Coloured iF Show eacond rana Cirpor shale bins F Dua record datetime Singh ine Double ire E Show band power ina Shat ine F Show values on ine 2 Cross hai Cl Propecctenral Z Asse ZE Ke Figure 4 30 Display Style Editor Waterfall tab SKF Analysis and Reporting Manager 4 27 User Manual Plots Plot Types Waterfall Blanking Waterfall blanking refers to configuring waterfall plots to hide data values below a specified percentage of the waterfall peak value To set the waterfall blanking e Enter any positive number between 0 and 100 Enter the percentage blanking value tt A Cka Pur Figure 4 31 Waterfall Blanking e Click OK The plot is redrawn Create Wat
60. 7 1 Reporting Expert Wizard e Click Next The Select Report page displays SKF Analysis and Reporting Manager 7 1 User Manual Reports Reporting Expert Reporting Expert Select Report On the Select report page select the report to apply to the selected data structure shown in the window caption You may also create new reports and delete existing reports on this page Reporting expert Processed records from ARM created om 30 May 2 Select report The Fallavang let shows all of the repols curently defined n pour getup choose a regertbo edit or click on the Hew button bo ciesa rea rennt x chee 2 Her Figure 7 2 Select Report Page The Reports list box displays all defined reports To delete a report e Select a report from the Reports list e Click Delete To create a new report e Click the New button A new report displays in the Reports list To apply a report to the selected data structure e Select a report from the Reports list e Click Next The Definition of Report page displays SKF Analysis and Reporting Manager User Manual Reports Reporting Expert Reporting Expert Definition of Report On the Definition of report page enter the report name and choose general record information items to include in the report for each record Reporting expert Processed records from ARM created om 30 May 2 gt Definition of report Tou mus gye you repot anama
61. Agreement Severability If any provision of this Agreement is invalid illegal or unenforceable under any applicable statute or rule of law it is to that extent to be deemed omitted The remainder of the Agreement shall be valid and enforceable to the maximum extent possible Read and Understood Each party acknowledges that it has read and understands this Agreement and agrees to be bound by its terms Limitations Period No action arising under or related to this Agreement may be brought by either party against the other more than two 2 years after the cause of action accrues unless the cause of action involves death or personal injury Attorneys Fees In the event any litigation is brought by either party in connection with this Agreement the prevailing party in such litigation will be entitled to recover from the other party h all the costs reasonable attorneys fees and other expenses incurred by such prevailing party in the litigation Authorized Representative The person installing or using the Software on behalf of Licensee represents and warrants that he or she is legally authorized to bind Licensee and commit Licensee to the terms of this Agreement Injunctive Relief Licensee agrees that Licensor may suffer irreparable harm as a result of a violation of Sections 2 4 6 10 15 and 17 of this Agreement and that monetary damages in such event would be substantial and inadequate to c
62. B Change the graph to display a logarithmic plot with values in Decibels Log magnitude Change the graph to display a logarithmic plot with values in magnitudes Phase Change the graph to display a linear plot with values converted to phase Real Change the graph to display a linear plot with the real values Imaginary Change the graph to display a linear plot with imaginary values The last three options only apply if the data is complex i e each spectral line includes a real and an imaginary component You may combine these to produce the magnitude or phase value for the line or displayed alone These settings apply only to frequency domain data and are ignored in any time domain records e Click Next The Confirm page displays 4 58 SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert dB Reference The dB reference page applies a Decibel reference value to all records in the selected data structure alobal editing eapert Dema DATA dE rmefcrence Select Pa Diecbel slerernce v ka inji Baamas value 1 Choose aneisence value buure vah the Decibel sae Al icad dedeult misky boa dE reference of unity You ma ertai any Wales pued Eia Ded Figure 4 68 Global Editing Expert dB Reference Page e Enter the reference value required in the Reference value text box gt This value displays in the units currently applied to the record If you change the units
63. Click the browse button next to the Samples field to specify the start and end values of the sample portion Pan signal Select this option to advance the selected region of the waveform each time a spectrum is created this allows you to pan across the waveform creating multiple spectra Averaging Enable to create a single averaged spectrum from the waterfall When you click Process the required number of spectra is created then averaged together to produce a single spectrum FFT Window Specify a window filter Rectangular Parzen Hanning Welch Hamming Flat Top or Exact Blackman Detection Specify amplitude scaling on the results RMS Peak or Peak to Peak X axis units Specify frequency units for the output if you are working on triggered data or the source waveform includes a speed measurement you may choose to normalize your output to orders Spectrum delta For waterfall plots select between a fixed number of spectra or use time or speed changes delta RPM to process the data Number of spectra Specify the number of spectra to display Offset Specify the offset value to skip data at the start of the recording Spacing overlap Specify a value to control the spacing SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window Enveloping analysis gE For a single spectrum output create an enveloping gE spectra and waveform based
64. E PE Chl tase FFT from Ch _ se FFT from 20K PR Pe Chl Ans FFT trom Chi Ai FFT from 20K PEPE Cl Sas FFT from Chi Reng seporting to enis hari Hie sana proms Lx chee F Her Figure 7 4 Reference Record Page The Records list box displays all individual records in the selected data structure e Select the record to use as a reference from the Records list e Enable the Restrict reporting checkbox to restrict the report to only records with a particular process type e Click Next The Select report items page displays 7 4 SKF Analysis and Reporting Manager User Manual Reports Reporting Expert Reporting Expert Select Report Items On the Select report items page create edit and delete the reporting items to use in the selected report Reporting expert Processed records from ARM created om 30 May 2 ed Select report teme The following list shows ofl of the repot tens defined in the curen repo chooses an iem 1o edt or click on thes Haw buton tooeale a new tem Click on Me to geretebe the raamil using Fese sellings apet iemi EA Hees lem if Haw Al Edi II Til Dette La cove L_ 2 Hoe Figure 7 5 Select Report Items Page The Report items list box displays all report items in the selected report To delete a report item e Select the item from the Report items list and click Delete To create a new report item e Click New To edit a report item
65. Gade banires Process iers Trecetucer Locations di Reference Mesmumement Control No Locators 1 Figure 6 8 Measurement Locations Tab No Locations Specifies the number of measurement locations on the tested machine Typically each bearing is a test location Directions Default options are Horizontal Vertical and Axial This specifies at which sensor orientation s to collect data for each measurement location Create up to 32 custom directions by simply entering text in the Labels column Use the drop down by clicking on an entry in the Enabled column to enable disable or delete a direction If Triax Sensor on the Measurement Transducer tab has been enabled then directions cannot be named Instead Horizontal Vertical and Axial readings will be taken for each location dB Reference Sub Tab Messeren macine actae FFT Corral Gace Labels Grace Bands Gade Sources Process Aieows Trsice Locators SS Aaterence Meas rerent Control Figure 6 9 Measurement dB Reference Tab Enable dB Enable if you are using decibels to measure vibration When enabled the Baseband area becomes editable Enter your O dB reference value measurement units and detection type for Acceleration Velocity and Displacement measurements 6 8 SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Measurement Contro
66. Gl ga ce A BIOI 2 Five Aai J awaa oC bec ies Si Care TATA Ae MHE WETORES E Ay DODE Ha BET DABIT EA FAF Ag FAF sah vores poea coheeance H Agy dasa i anp iaa HE dre moj Depo iag Pig iE be Tapaat F Grag Mil Spectr CHE mebaiai pr ema 4 LIIMT 1 Place the mouse cursor over the intersection point of the three axes The cursor changes to a NS EW shape to indicate that you can drag the intersection w 1 4454 cee Figure 4 25 Waterfall Plot Moving Mouse As you move the mouse the new layout previews as a set of dotted lines SKF Analysis and Reporting Manager User Manual Plots Plot Types fe Si nahn awi eportion Manaper Ae En wey SF Bopi ieee Bee Teo a a a Bose W th E ite e qa oc a FR eT aw tE ee 2 Gale 2 Fiki 7 Fan Aglare Lin Ekim Em mm A F B CIE Dre Date Da 2 So Dera DATA i ge THE HETORIES F Ay OOO a e WST A DABIT agr FAF A FHF reth rr peer coherence EAr hasaa and Bikar Daa amp EERE p ge Dr oe oreo i ora BNT Frat Figure 4 26 Waterfall Plot Moving Mouse e When you release the mouse the waterfall is drawn in the new position Sir Anahe mwi Reporting baer Be Sk we DF beni beb Ameng Mei Hee m B E eco ie i i B zma oh a aiz Lie SAE g 4 SSNES eae b OI 2 Five 7 Aon dare i CAC Dome Daa Sa Cera TT og THE HETORES P Ay DOE af we BET DAE a ye FAF E ye PAF sath pone poce coheenoe P A Taw c
67. H Feperey Hej Figure 5 13 Output Spectrum You can perform an unlimited amount of FFT processes in the Digital Signal Processing window ARM automatically saves each process Each time an FFT is created it is added to the list of outputs stored in memory The Record drop down list displays each FFT process record SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window Multiple Waterfall Plot ARM can provide simple and complex processing of time waveform data into multiple records or waterfall plots For multiple channel recordings where one of the channels represents a trigger signal the trigger can be used to derive time and rotation information suitable for creating speed based waterfall processing opening up the way for complex spectral analysis including phase data To display a waterfall plot of spectra from the waveform e Select Multiple Waterfall from the Please select process control The fields below are enabled allowing you to select the number of spectra to produce the number of input Samples for each spectrum and the Spacing overlap required as well as the FFT Window X axis units and Detection berir iw EED or APET io sg cea eh iy Figure 5 14 Main Window Three methods are available for processing this data Even spacing Specify the Samples Offset and Number of spectra Delta time Select the Delta time opti
68. Item On the Definition of report item page enter a report item name and specify whether this item reports on a single signature value or on a band of values from the record Report Gemerabor for Microsoft Word FFT from 404K PK PE CHT T A S Detiniton of report tem ou can gys pedine a aah bka iet ea e a aiie at heading bot Hame Repeat tem identity the bookmarks in pour template to which you wari io albsch Ghar em Heading Report items can be configured to report on either single signale values a on a bard amp Singe signature ine report Band epo Figure 7 15 Definition of Report Item Page e Enter or edit the report item name in the Name field This name identifies the report item when editing reports in the program e Choose whether the report item is used to report on a single signature amplitude or ona band of values Single signature line report Select to report on the peak value or on a selected position Band report Select the lower and upper positions from a graph of the signature and choose to report on the band peak or the band power RSS e Click Next The Signature band report item page or Single signature value report item page displays depending on your selection SKF Analysis and Reporting Manager 7 15 User Manual Reports Word Reports Report Generator for Microsoft Word Signature Band Report Item On the Signature band report item page specify how to use the re
69. Required drop down lists gt Ifyou disable the Apply checkbox these values are ignored and scaling is not applied in all records e Click Next The Confirm page displays 4 62 SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert Integration Differentiation On the Integration Differentiation page select to view your data in Acceleration Velocity or Displacement each record is integrated or differentiated as appropriate Note that time domain uneven x axis data or data that does not use standard units is not modified alobal editing eapert Dema DATA lmtegratiaon difierentiation POETAN Select fhe rdegustonr requred C Aniston C ioei E Dipen Figure 4 72 Global Editing Expert Integration Differentiation Page e Select the detection required e Click Next The Confirm page displays SKF Analysis and Reporting Manager 4 63 User Manual Plots Global Editing Global Editing Expert Notes The Notes page adds a note to all of the records in the selected data structure alobal editing eapert Dena DATA Hotes SETS Tipe a i paca the tes raira ee E Shows mote pokes pet of mobs codes Soa eda Dik on thee Sdi held button lo celad held vtech wll jamal property of the recon much as the recond detevtinee or behad etek J ee 7e Figure 4 73 Global Editing Expert Notes Page gt Notes are actually a property of the display
70. T If the mouse cursor is between the start and end points the pointer changes to a cross click and drag to move the whole range keeping the same width gt You can only perform a FFT on a power of 2 the software will reduce the range to the nearest power of 2 below SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window no Tma Domain CHE g SOK PK PK Cha Y Axid 5 23 2013 4 37 16 PM 1 60 1 20 i 0 80 0 46 iy i j 0 00 i i de Whe i 5 l 1 2 40 989 f 20 0 4 Said T 0 090 64 Cersor 0 282217 s Time 5 alee to Figure 5 11 Whole Range To enter the cursor points manually click the Browse button on the left panel next to the Samples field The Enter range dialog displays e Enter the starting and ending values to determine the number of lines selected for the FFT Enter range for FFT samples Channel 1 Ea Start s End 12 66055555555 Erter values inrange 0 to 17 1 Figure 5 12 Enter Range Dialog Starting and Ending Value e Once you have specified the required range specify the FFT Window filter Detection and X axis units and click Process The output spectrum displays in the lower panel SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window m PFT irop sitet Fete ORL yada T run CSL T A TiTa ha DOHA kH P
71. UFF and Excel file formats To export data to one of these formats e Select the hierarchy item from the data structure and select the Export menu s ASCII UFF and Excel export option The Export format dialog displays where you can specify parameters for export e Select the Export all records to multiple files checkbox to export records to separate files type in the Export folder directly or Browse to a folder Or e Enable the Export all records to a single file checkbox to export all records to a single file type the file name in the Single output file name control or select an existing file to overwrite e In ASCII and Excel export enable the Include header information checkbox to include the header information with each record and enable the Output multiple records to multiple column checkbox to export multiple records using the same process parameters as a multiple column export e In UFF output click UFF Options to access the UFF Options dialog where you can choose various settings including output to the ICATS Transfer Function file format e Click OK to begin the export Export Format HTML ARM can export data to HTML file format To export data to HTML file format e Select the hierarchy item from the data structure making sure the graphic plot displays and select the Export menu s HTML export option The Save As dialog displays e Specify the filename and location of the HTML file output e Click Save to
72. a 0 l AF paang 0 oF Hand b Mt Piir Cemi a T Figure 5 20 DSP Post Processing Menu gt A Cepstrum does not create an additional record You can simply toggle between a spectrum and a Cepstrum Cepstrum The result of taking the inverse Fourier transform of the logarithm of the spectrum of a signal A Cepstrum converts the power spectrum values and converts them to decibels then performs a FFT on the shape to produce another spectrum With a Cepstrum both negative and positive values display Power Cepstrum The squared magnitude of the inverse Fourier transform of the logarithm of the squared magnitude of the Fourier transform of a signal A power Cepstrum squares the Cepstrum values In essence it s a FFT of a FFT Since squaring a value always results in a positive value a power Cepstrum only displays positive values With a Cepstrum and power Cepstrum units are measured in decibels dB and the x axis units display in terms of time quefrency not frequency Quefrency is a time parameter that can be thought of as delay time or periodic time rather than absolute time Power spectrum The squared values amplitude of a spectrum squaring of every spectrum amplitude When creating a power spectrum the units modify to the original units and are squared SKF Analysis and Reporting Manager 5 17 User Manual Digital Signal Processing Cepstrum and Power Cepstrum Post Processing
73. a using the default parameters as set on this toolbar FFT Window Allows you to choose the FFT window filter This will be used the next time a Quick FFT or Quick Waterfall is chosen FFT Lines Allows you to choose the number of spectral lines for the FFT when processing a Quick FFT or Quick Waterfall Note that the selected samples are taken from the beginning of the waveform WF Spectra Allows you to choose the number of spectra to be created from the waveform the next time a Quick Waterfall is chosen WF Spacing Allows you to choose the number of sample lines used to separate or overlap the blocks of data used to create the spectra the next time a Quick Waterfall is chosen SKF Analysis and Reporting Manager 9 15 User Manual 10 Command Line Parameters Several optional command line switches are available when running ARM To implement one of these create or edit a shortcut to the program executable and add the switch on the end of the command line usually the Target entry in the Shortcut properties as follows assuming the default installation e C Program files ARM exe x Where x is one of the command line switches listed below You can use any or all of the required switches at the same time Note that the switches are not case sensitive IC Clearing general program settings Clear all registry entries where all ARM settings are stored and your own graphical display style and reports set
74. alues Specify how many significant figures to use when listing amplitude data values or notating graphs and cursors The default setting is 3 Use scientific notation for all linear values Specify whether linear magnitude values are formatted using Scientific Notation Fixed scaling for standard engineering units data View data taken in standard units using fixed scaling for example velocity always displays in mm s or ips If this option is not set and for all other types of data output values are scaled to their optimum range Number of significant figures for time series Specify how many significant figures to use when listing X data values in time domain The default setting is 6 Number of significant figures for frequency domain Specify how many significant figures to use when listing X data values in frequency domain The default setting is 3 SKF Analysis and Reporting Manager User Manual System Preferences Program Options Saving Tab On the Saving tab configure various saving options in ARM Program options Curechores Fie options Setup Updsien Peps her Gere Fometiing Teang Daa shies Source When choca a dahi Hinan lens umaa pave dats in dela steam fies E Ube the tama nama oe the paos O Lise bfe pana dichon a free circe daa fanless muta ft on removals dieses of card reader Enie WA iet on ullorrvalic tar Decking el Saws decking conbents on eal e fusomab aly cave Changer i
75. an sdei 1 EL fuser defect 1 Ei SEF E201 ANGULAR CONTACT Critical Prequences at cunning speed of 0 Hr fd CPM Inner defect jL ak Cage defect 0 00 Hr Speed fer Bul detec 000 Hg Duis detec D00 HT Inner defect 0 08 Hz Salae tan apeere ro L coe 3s Figure 4 78 Bearing Selection Dialog 11 Fields include Bearing s selected Displays a list of bearings selected from the bearing database A summary of the selected bearing displays in the area below the selected bearings list View defect harmonics Cage defect Ball defect Outer defect and Inner defect Select the number of harmonics 0 n of each defect frequency shown on the plot for the selected bearing Selecting O will hide the harmonic Speed H2 Enter the machine s running speed to determine the four defect frequencies for each bearing displayed on the plot Select from spectrum Click to select a running speed from the frequency plot Position 9 Horizontal Speru CHI fisis dai Prmjuan y hs iu IF fesi mi Figure 4 79 Frequency Plot SKF Analysis and Reporting Manager 4 69 User Manual Plots Rolling Element Bearing Database To select a running speed from the frequency plot e On the frequency plot place the cursor on the plot to select the running speed or click Peak to automatically move the cursor to the signature peak value e Click OK to use the running speed of the current cursor
76. and Reporting Manager User Manual Plots Display Style Editor Display style editor Orbit Tab The Orbit tab defines the style used to draw orbit polar plots Gapa shy he edibor watedal Speckogiam Orbe Other Gid ires Axes Orbit opticers e Drau anahsis bebe E ghor record name Draw cod datsAima Orbi cua shide Single ire E Diamond O Dobie fee O Cide E Choss haw O Sga Wa Dk j Cancel Hep Figure 4 15 Display Style Editor Orbit Tab Fields include Orbit options area Draw analysis label Show record name and Draw record date time When enabled these labels are drawn at the top of the plot note that the program checks the available space and only outputs those that fit If the labels do not display increase the window s size or reduce the font s size Circular orbit When enabled ARM draws orbit and polar plots in a circular panel You may also choose to view radial grid lines and probe position markers Access these options on the Grid lines tab Orbit cursor style area Single line Cursor line links the cursor point on the trace to the center origin of the plot Double line Uses a thicker cursor line Cross hair Diamond Circle and Square Cursor appears as the selected shape SKF Analysis and Reporting Manager 4 15 User Manual Plots Display Style Editor Display Style Editor Other Tab The Other tab defines the style used to draw the cursors on ov
77. are When analyzer data is processed you have the option to write to standard Type 58 UFF files or to a new Transfer Function format used with ICATS Modal Analysis software LUFF Options Aletenence nodes Fie caving ICATS Vu Gan these to ieee and ends io FAF lies compatible vah LATS povaa Ihecps ate Hra ri larai to UFR Tapa 98 iat but conis aceite nii hpa inlomahorr F Lew CATS FAF Forra hee Please oskci the input hype TY PE required 2 Flaceptence bigame tenes C Mobily yslocadpiece CO r inis Acomelnance Lacoee shor Toe C Tiaraminiiiip panared bed Imon appka laca C Risa ExcitahorvPletesence and Aeaporae modes reccd 5 lw ok 36 cei Figure 8 8 ICATS Tab To write to ICATS format files e Enable the Use ICATS FRF Format files checkbox gt This setting has no effect for reading these files since ARM analyses the file to determine its type e Select the input type required SKF Analysis and Reporting Manager 8 11 User Manual Import Export UFF Options Options include Receptance displacement force Receptance corresponds to displacement force i e um N or m N in SI units Mobility velocity force Mobility corresponds to velocity force i e mm s N or m s N in SI units Inertance Acccelerance acceleration force Inertance or Acccelerance is acceleration force i e g N or m s2 N in SI units
78. are a number of controls that allow you to manage these files Delete Click to delete any selected files Transfer Click to copy the selected files from the mobile device back to your computer gt File transfers in either direction will overwrite any file that already exists in the destination without any warning Tab Overview Measurement Specifies the vibration measurement sensor type and sensor location settings Machine Picture Displays a user specified picture or diagram of the test machine showing sensor placement locations FFT Control Allows FFT parameters to be changed Grade Labels Specifies the number of test grades alarms and the label for each Grade Bands Specifies the number of test measurements bands for each sensor location defines the specified measurement types and measurement frequency range Grade Boundaries Specifies grade level settings alarm levels for each test grade at each measurement location Process Alarms Specifies the number of alarms and the label for each SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Measurement Tab Measurement tab settings specify the type of vibration sensor used the number of test measurement locations and the sensor placement orientation s for each measurement location Note that the type of sensor specified accel vel disp etc determines th
79. are pae Ope 2s P Dikan Seectrum CHL auburfall umm 1y F 2 02 AM Praquency ider TEF ried anc Bayar ing Raraga ob by Copeight E GF Gap MIN Figure 4 27 Waterfall Plot Moving Mouse Mouse control is similar in waterfall plots to single signature plots Use the left right Home and End keys and you can click on the graph In this last case the application looks for the signature line nearest the click point up to 10 pixels away in order to identify the line that was clicked on This makes it very easy to click on a prominent peak Waterfalls are drawn with the earliest record at the front and the latest at the back SKF Analysis and Reporting Manager 4 25 User Manual Plots Plot Types To reverse the waterfall layout e Click Graph Reverse waterfall This option remains enabled while in use e To cancel it click Graph Reverse waterfall again gt This setting is specific to the currently displayed data set and remains with any particular waterfall once made To specify which records to included in the waterfall display e Click Multiple plot waterfall ranges from the Graph menu The Choose records to include in display window appears with a listing of each individual record nclude in display for 2 Channel 1 waterfall 2 Spectum CH1 Os to 1 60099 z Harring 13 Age 2007 01 20 02 Spectrum CH1 0 508756 to 1 09062 5 Hanning 13 Ape 2007 01 2 2 Spactum CH1 1 01953 s to 0 580359 s Hannin
80. arings were actually imported e Click OK The newly imported bearings display in the list To import only selected bearings from a bearing database e On the Select a bearing dialog click Import Import from database Another Select a bearing dialog displays e Click the bearing s to import into the database and click OK Only the selected bearing s will copy from the main database into your local copy To add bearings to the Bearing s selected list e On the Bearing selection dialog select a bearing and click OK The Bearing selection dialog displays and the selected bearing appears in the Bearing s selected list gt You can only add one bearing to the Bearing s selected list at a time Viewing Bearing Overlays Each selected bearing s defect frequencies display on the plot indicated by colored dashed lines Each color represents a bearing and each defect frequency is represented by a dashed line with the defect frequency initials displayed at the top of the dashed line Fc cage Fb ball Fi inner race and Fo outer race Place your mouse cursor on the dashed line to display the bearing s manufacturer and part number running speed and defect type in the status bar at the bottom of the screen SKFAnalysisandReportingManager ss i CU t t i O O OO nA User Manual Plots Calculating gE Overall Limits im 3 Bj eS e Crack i TE Figure 4 81 Bearing Overlays To remove a bearing fr
81. ature and choose to report on the band peak or the band power RSS e Click Next The Signature band report item page or Single signature value report item page displays depending on your selection 7 6 SKF Analysis and Reporting Manager User Manual Reports Reporting Expert Reporting Expert Single Signature Value Report Item On the Single signature value report item page specify how to use the report item being edited based on a single value taken from the signature Reporting expert Processed records from ARM created om 30 May 2 EJ Single signature value report item Please select the bame pou vash lo mchde in lhe single bem raport and whether you went bo select a frequency lime part or use the peak value S Siale peck valia 2 Select postion of reported vale Conliguiston of the rapot ilem E ree the ahenea value Dic ina Sentaranes E Figure 7 7 Single Signature Value Report Item Page e Determine whether the report item reports on the peak amplitude of the signature or the amplitude at a selected position Signature peak value Select to report on the peak amplitude of the signature Select position of reported value Select to report on the amplitude at a selected position Enter the time or frequency value into the Position text box or click Pick from graph to open a simple graph window and select the position using the normal single cursor function e Enable the Include the abscis
82. ay settings notes annotations and post processing entered by the user This option is only available when selecting a record with suitable source data hex data files analyzer binary files in the left panel gt This feature is only available if the program option for storing the source data in the data stream was set when the data was first loaded from its source file Data summary Outputs a text summary and a full listing of the item s data to a summary window Delete Delete the selected object deletion is permanent and cannot be undone You may wish to use the Edit Cut command to move the object to another data structure instead Print Prints the selected object if a plot displays when you select an item the plot prints otherwise a text listing prints Print preview Displays text in a Print Preview window Expand record Expands single records containing transfer function data in real plus imaginary data format to draw Bode and polar plots Any trace in real plus imaginary format contains sufficient data to produce the dual channel display this feature makes it possible to use the second display channel for another process such as correlation or time domain DSP window Displays currently selected data in the ARM Digital Signal Processing window SKF Analysis and Reporting Manager User Manual General Window Operations Context Menus SKF Analysis User Manual Quick FFT Processes the currently se
83. begin the export The HTML file is created and stored in the specified location along with a JPEG file of the plot SKF Analysis and Reporting Manager 8 1 User Manual Import Export Export Format PDF Export Format PDF ARM can export data to PDF file format To export data to PDF file format e Select the hierarchy item from the data structure making sure the graphic plot displays and select the Export menu s PDF export option The Export data to PDF dialog displays e Specify the filename and location of the PDF file output e Click Save to begin the export The PDF file is created and stored in the specified location ASCII and Excel Import Wizard Import from File Wizard The Import from file wizard allows you to view the contents of ASCII or Excel data files and specify how ARM interprets the data The file contents display in the upper panel The lower panel displays parameters for you to specify the data format To launch the Import from file wizard e Select the File menu s Open a data file or Open source directory option e Select the file or directory you wish to open The file or directory opens in the Import from file wizard The General page displays first e Use the navigation buttons at the bottom right to proceed through the wizard To use the same settings for all following files worksheets to be read in the current import process e Enable the Apply same settings to all files checkbox e If you impo
84. ble field name Click Next to continue with the Report Generator When viewing a balancing report in ARM use the View menu s Balance Table and Balance Polar Plot options to toggle between displaying the table and polar plot Bookmark Guidelines Use the following guidelines to set up your bookmarks You must have one or more bookmarks for each record to be output from your data structure Only run multiple bookmark reports on whole data structures If you run one on a record only that record is reported on as a single element in the document Define your bookmarks with identical names ending with a number For example to output three records to a file and include the record name and the graph plot for each define six bookmarks in the template as follows RecordName1 Graph1 RecordName2 Graph2 RecordName3 Graph3 You may use any set those bookmarks ending with a number when selecting the bookmarks in the Selection of fields and bookmarks page of the Report Generator for Microsoft Word wizard You may omit numbers in the bookmark sequence in your template if you wish to only output certain records in your document For example if you had a data structure containing two Overall Vibration trend plots followed by four Overall Vibration single measurements obtained by copying records and wanted to present the information in that order you could create bookmarks as follows in your template Graph Graph2 Overall3 SKF
85. ce the vertical scale e Click Reduce or press Alt M or the down arrow on the keyboard To reset the scale back to its original range e Click Reset scale or press Ctrl M on the keyboard Or e Double click the area immediately to the left of the y axis Plot Types Cartesian Plots On a Cartesian plot data is plotted in two perpendicular directed lines x and y axis For time domain data the x axis defines the time interval of the original sampling For frequency domain data the x axis defines the frequency step of the resulting spectrum gia ears e Tim ierg karg Gmi pee u 40 988M oa E ee CH twat ren Ssh dete reaching que Prom P ety hs ec neeg bon F Figure 4 23 Cartesian Plot SKF Analysis and Reporting Manager User Manual Plots Plot Types The y axis displays data in linear or logarithmic scales and if the source data is complex in the real and imaginary scales Use the Display Style editor to customize the appearance of Cartesian plots Waterfall Plots ARM displays multiple channel data as waterfall or overlay plots A waterfall plot consists of several frequency domain signature readings drawn in a cascading waterfall layout displaying the data change from reading to reading An overlay plot is a waterfall plot with no offset on the z axis To change the layout or aspect ratio of the waterfall e Click the plot s intersection of the three axes e Drag this point around to achieve your des
86. ces Program Options Save location for process records Select the location to save processed records Options include the data directory processed data directory or the same location as the source File Options Tab On the File options tab specify various options for ASCII file naming for processing of records into UFF file format and the location of various program setup files Program options Genea Fomatng Savng Data stream Saato Directores File options Setup Updates Repats Other C Use custom file extensions bor ASCII fles You can cudtomese the wap LFF Ibas ane procesped by chching on the UFF options button UFF options Storage locaebon of addtional sel up ties Al usett application dala C Program data duectory My documerts D Other Figure 9 10 File Options Tab ARM allows you to use the default record extensions as used in the analyzer when reading or writing ASCII files as follows e tra for Trace A records the first record in a map trace always has the extension tra e trb for Trace B records e wxx for the second and higher records in a map trace where xx represents the record number in the map To specify your own extensions Enable the Use custom file extensions for ASCII files checkbox This activates the three controls Trace A Trace B and Map allowing you to enter your own extensions gt You must include the dot in the extension gt For the Map option only en
87. collechy seia communicsinres 01 1100 01 225 MHEN L vo Koa F Hep Figure 9 1 General Tab Fields include File source history list size Specify how many entries to keep in the history list for files and source directories opened To clear the current list click Clear history list Show information panel below graph in main window Specify whether an information panel displays below the graph on the right side of the main program window if this option is disabled the graph takes up the full available height Play an introductory sound when showing the Welcome window Specify whether a sound plays whenever the Welcome window displays SKF Analysis and Reporting Manager 9 1 User Manual System Preferences Program Options Use legacy icon images for menus and toolbars Specify between the current and previous style of action images Send key presses to the graph plot If enabled the left and right arrow keys can move the cursor Draw a border when printing or copying a graph to the clipboard If enabled a single border is placed around the entire graph image when it is printed or copied to the clipboard Reset graph scales when left dragging zoom rectangle Resets both the horizontal and vertical display ranges by Ctrl dragging Show legacy analyzer serial communications Specify whether previous analyzer serial communications PL22 DI 2200 are shown Show data collector serial
88. ction containing two measurement channels SKF Analysis and Reporting Manager User Manual Digital Signal Processing Digital Signal Processing ke SKF Analyser and Reporting Manager Ale Ede View CSP Export Graph Reports ER DSP Window MA uick FFT E ye Charme ye Charmel 2 Ay BODE Ay MY OUIST ODABIT Ay FRF we FAP with some poor coherence wv Anaye ond Bump Data db Waterfall Figure 5 2 Second Level Selection The table below displays the available options for each level Selection DSP Window Quick FFT Quick Waterfall First Processes first Available only if all Available only if all measurement measurements in data measurements in data only structure are time domain structure are single channel creates one FFT per waveform time domain creates one waterfall per waveform Second Available if all Available if both channels are Available if single channel channels are time time domain time domain domain Third Available if time Available if time domain Available if time domain domain gt The Quick Waterfall option is not available if the FFT Lines control is set to Entire record The Quick FFT and Quick Waterfall options process all records in the data structure at once if selecting the first level node The resulting output mirrors the structure of the original data structure if output to a new data structure 5 2 SKF Analysis and Reporting Manage
89. d serari end rhen be yea F 1 eaaa Hes undei iO nen 1 ec VEL S00 HE ciy Fise mnha by CADooument and baing AA H 0 coe ons snd Reporting Honea damini diae da 811201 10_24_31 ae Piast thn Cheon bullion ta vars tho dilionn the appicca man eck u chk Back tn dewvniosd come races dala irom your analo re e Ea Ji Figure 3 6 Mobile Device Viewer s Transfer Complete Window gt After ARM installation a unique folder structure is created that ARM uses for the uploaded measurement data for analysis purpose You will find this folder structure under C Documents and Settings user My Documents Analysis and Reporting Manager Data It contains subfolders such as Report Templates Measured Data Sample Data and Processed Data 3 6 SKF Analysis and Reporting Manager User Manual Plots Plots Overview ARM plots allow you to manipulate both the data and the plot used to present your data To display a plot e Select a record from the hierarchy in the left panel A plot displays in the right panel Pe D Yew OP Eqet Geh Amoi Tooke feb Tose wedew D aen uve D Di Donar D a Dai venit za Of w a eae oa mt e er a2 sunm CTC Dew Dea Terre Domen Ch Ver TIME HISTORIES Chancel Z 4 L 2007 1 29 02 aK Ot dowo SIl 2PAre Shan Sderce N 7m By aaeanoa tony HAM contend on HE Sep A s Dewbala Ry IME WETORES Ay Oyra ag B Ay toc EA WAT a Av ORBIT au ih E Ae FF wt
90. der amplitude and phase values is drawn within the upper Cartesian plot top right or outside the plot to the right SKF Analysis and Reporting Manager User Manual Plots Display Style Editor Coherence options area Coherence level Enter a value 0 to 1 to set the low cutoff level for validating coherence data When plotted any values below this level are drawn in red Display Style Editor Grid Lines Tab The Grid lines tab defines the style used to draw the gridlines on single signature and orbit plots Draplay shy he editor watedal Speckogiam Cibt Othe Gridline Ases Horizontal Wici amp None amp None 2 Sold ines Solid fines Dolled knee C Dotted ines O Dasked ire Dashed ires Co Intersection dots intetrechon dots Ortet ophorra E Orbit gid fines radal and diametric E Show probe ange makera Figure 4 17 Display Style Editor Grid Lines Tab Fields include Horizontal and Vertical areas None Solid lines Dotted lines Dashed lines and Intersection dots Select a grid line style gt Intersection dots do not display unless both Horizontal and Vertical are set to this value Orbit options area Orbit grid lines When enabled angle markers display on the plot Show probe angle markers When enabled x and y axis probe angles are drawn on the orbit SKF Analysis and Reporting Manager 4 17 User Manual Plots Display Style Editor D
91. dited based on a single value taken from the signature Report Gemerabor for Microsoft Words FFT from 404 PK PER Ch T A Single signature volue report tem Piece telect Ihe Rene pou wich to paida in Ihe angle item reper and whether pou wand bo elati a Negant fine pore Of Leb Be peak sahaa E Signature pesk vale 2 Select podion of reported value Configurstion ol the nepeart tem e Irectudie tha abicheea valia Display scale Linger Show hamri 1 Figure 7 17 Single Signature Value Report Item Page e Determine whether the report item reports on the peak amplitude of the signature or the amplitude at a selected position e Select the Signature peak value option to report on the peak amplitude of the signature e Select the Select position of reported value option to report on the amplitude at a selected position Enter the time or frequency value into the Position text box e Enable the Include the abscissa value checkbox to include the X value in the report e Select a display scale type from the Display scale drop down list to direct the output into a standard display unit e Specify the number of harmonics of the selected position to include in the report from the Show harmonics selection box e Click Next You return to the Select report items page SKF Analysis and Reporting Manager 7 17 User Manual Reports Word Reports Report Generator for Microsoft Word Select File Output On the Select fi
92. e cursor point otherwise it centers on the lower half of the current zoom To zoom out e Click the Zoom out option from the Graph Zooming menu or press Alt Z The same rules regarding centering apply as for zooming in To reset the zoom back to its original full display e Click the Reset zoom option from the Graph Zooming menu or press Ctrl Z Dragging a Zoom Bar on the Graph Using the Mouse To zoom in using the mouse e Click just below the x axis and drag the mouse along to the other position As you move the mouse a red zoom bar displays the extent of the new zoom SKF Analysis and Reporting Manager 4 19 User Manual Plots Zooming ee TEE Biorein i z Eea e E Moart Bjus e EEE ee MELLEI oon thy eect amme a 4 Dem Delt r apr aa Bre Dra i Bares bila maibtt Lie meil as T DEn a Sg TE Ty ih a yr tones eel hp Lm Rie larvae da jerien errr SE ir el CTC Cerna Coe Dhim wij Wire Jia bhira 5 iH Sy iE ee Se Oh die Figure 4 19 Zooming in e Release the mouse on or above the x axis The plot redraws using the specified zoom the zoom range shows in the status panel as you drag the mouse Ta a a Dhaest Pimia thet ein E CELL ODDS 1 444 oMBe apo Tiana DAYLE deg poe aed Gre Daia Beare Cote Pistia Goored is ie oi oi a eg Tinh HE LH ae 51 8 F rt er 2k petits Figure 4 20 Zooming Result gt If you release the mouse below the level of the x axis ticks the zoom is cancelled To reset
93. e entire waveform to produce the spectrum uses the nearest power of two below the number of samples If you select the Single spectrum option the Use samples between cursors and Enveloping analysis gE options become available Multiple Waterfall Creates a waterfall plot from your data numerous processing options are available depending on whether your data includes a trigger channel and represents steady state or a run up coast down recording If you select the Multiple Waterfall option the Select signal Select trigger and Samples options become available as well as the Autofit button Select signal Select the channel containing the signal to be processed applies to data sets with more than two channels Select trigger Select the channel containing the trigger signal used to supply speed information applies to data sets with more than two channels Use samples between cursors Creates the spectrum from a section of the waveform If you select this option the Samples Pan signal and Averaging options become available Samples Specify how many samples to use for each spectrum The options are limited to the maximum value available gt The limit to the number of samples to use for a spectrum is 262 144 which gives a maximum spectrum length of 102 400 lines therefore if the source data contains more than 262 144 samples this field will only show options up to and including 102 400 samples Range
94. e from the trend and a file exists with the same name in the data directory you are prompted to either overwrite the existing file or recycle the file being removed from the trend SKF Analysis and Reporting Manager User Manual 7 Reports Reporting Expert Reporting Expert Wizard ARM s Reporting Expert wizard generates text based reports on your data Each report includes various reporting items and general information about each record Reports apply to the selected data structure on the main window and every record within the data structure To launch the Reporting Expert wizard e Select the Reports menu s Text Reporting Expert option The Reporting Expert wizard displays Reporting expert Processed records from ARM created om 30 May 2 ed Reponing Expert Reporting on Processed records Irom AAH ersaled on 30 h Weleame to tres Aegorting Exot The didog wil take you through he Seps nessa to select and apk a report to tie selected datz stischure On the next page you will be chow a let of te avalable epult pou may chaora one from the bet ci oreale a nev ore You Gan then goon lo modly his report Frrequred balore genersting Hes report The repot ail be applied ho al records within tes soucz data structure abhiough pou car ikar out raconde by anahe wpe ick on the Mexi butan tbo go to the repail selection page You cen chick on the Net snd Dack bitara al any lime bo review or change pour setings Figure
95. e graph plot of the CTC spectral ETE a Grephe v j _ Skip standard report items Figure 7 12 Check to Conformance Results Page CTC reports contain the CTC report which is a table of measurement results and status values and a set of spectral readings The CTC report can provide three output items to the document the results table the machine graphic and the multiple plot of the CSV results To assign a bookmark to one of these fields e Select the bookmark from the Table Machine and Graphic drop down list box gt If you are running a no bookmark report values write to the document in the order that they appear e Enable the Skip standard report items checkbox if you do not wish to specify any standard report elements for this report gt Special rules govern how CTC results are output to Microsoft Word reports e Click Next The Selection of fields and bookmarks page displays If you have enabled Skip standard report items the Select file output page displays SKF Analysis and Reporting Manager User Manual Reports Word Reports Report Generator for Microsoft Word Fields and Bookmarks On the Fields and Bookmarks page set up your Word report fields associating bookmarks in the template file with report elements in your data The Record fields list box displays all of the report elements and bookmarks available for output to a Word report The first column lists the record fields the second c
96. e is very small It includes a reference to the original WAV file including its location Do not move the WAV file to a different location otherwise you cannot use the data stream file If you do move the WAV file loading the WAV file directly causes a new data stream file to be created any cursor or notes added to the original will be lost Once a WAV file is loaded use of the buffering is fixed in the data stream file regardless of any settings changes in the future SKF Analysis and Reporting Manager 9 3 User Manual System Preferences Program Options Directories Tab On the Directories tab specify the main ARM data directory and various associated data directories for saving hex data files analyzer binary files UFF files ASCII files Excel files and FFT Analyzer CSV Time Signal WAV and CTC results CCR and trend files Program options hema F ometing Ssang Daa shes Roure Dicar Fie options Setup Updsies Riepma Ti Tie man data directay drer ethene he ooplcabor shoi be oen brehy data Anean pdt iier whech conten pour data along adh ap orah bereg Pike ind ariaa thd a ree harag ddd ae ee gri iy pe dita bian dala directo C Documents and Sef BAIE Wy Docume Arakas snd Aleporting E Browse diy Lee Wy ekociiretrada When you undead dats fom your snapser o mapal io a diae iie joma the oignal sownce dsa ie snd the erpat few are shored im oubor G rectones moma within the man dats director Us
97. e of the series is calculated and this value removed Within the Graphs submenus e g x axis and y axis entries you can find several plot options that refer to the following sections SKF Analysis and Reporting Manager 4 3 User Manual Plots Plots Overview Enter the Probe Angle On the Enter the probe angle dialog select the channel 1 X probe angle for your data The probe angle is defined in degrees and is measured counter clockwise with zero degrees being at 3 o clock Enter the X charnel 1 probe angle in degress i 2 LX cnca 2 Hep Figure 4 3 Enter the Probe Angle Dialog To define the probe angle e Enter the probe angle required e Click OK ARM redraws and rotates the plot to include the defined probe angle Enter a High Pass Filter On the Enter a high pass filter dialog specify a non destructive high pass filter for plots showing data in frequency domain units This zeros all spectral bins with a frequency point at or below the specified filter value and recalculates the signature maximum value CH1 PHASE Ente a high pars hhet velue in H2 a ppl this fitar nondestructive Ccm CZ Figure 4 4 Enter a High Pass Filter Dialog To apply the high pass filter e Enter the high pass filter value in the Enter a high pass filter value text box e Enable the Apply this filter checkbox e Click OK To disable the high pass filter yet retain the frequency value gt
98. e the Clear button to remove any picture from the current setup By default the picture saves along with the results in the CCR file Uncheck the Include in Results box if the picture is not to be included in the results file If left checked this can cause the instrument to run out of space relatively quickly after only a few results have been saved depending on the picture size FFT Control Tab FFT Control tab settings specify the FFT acquisition parameters Normal Baseband Sub Tab T Cocora Grade Lames Gace Bande Gace Douncanes Process Alerres Figure 6 12 FFT Control Normal Baseband Tab FFT Lines Select the number of lines to use for FFT from the drop down list Overlap Specify the percentage overlap to apply between acquired FFT blocks when the number of averages is greater than one Num Averages Specify the number of FFT blocks to use when calculating an averaged FFT Average Type Specify the type of spectral averaging to use RMS Uses RMS averaging Peak Hold Not a true averaging type but allows the spectral peak values to be extracted across the acquired number of FFTs Window Type Specify the FFT window to apply Min Freq Range Specify the minimum frequency range to apply to all measurements By default the instrument searches across all defined measurement bands see Grade Bands setup and finds the maximum frequency used This in effect defines the
99. e type of FFT spectrum collected acceleration velocity displacement etc Transducer Sub Tab small Motos Mesmrement Macine Acre PFT Cortro Gace Labais Grade Bands Gace Sourdsres Tarada liaan S Referee Mesmreret Cotta Measurement Units facas g Seretyey Figure 6 7 Measurement Transducer Tab Measurement Units Select the desired measurement units from the drop down list Note that you may use any derived integrated measurement units to specify individual measurement bands Sensitivity Use the alphanumeric keypad to enter transducer sensitivity in millivolts mv per Engineering Unit EU ICP Specify if ICP powering should be applied to transducer On or not Off Note that when selecting the measurement units from the drop down list the normal transducer ICP powering is deduced and applied This default behavior should be overridden if required Triax Sensor Check this box if using a triaxial sensor Note that checking this box enables further parameters to be entered Two additional Sensitivity entry boxes appear totaling three one for each input channel Also note that checking the Triax Sensor box disables custom directions under the Location sub tab SKF Analysis and Reporting Manager 6 7 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Locations Sub Tab Mesncerent haste Pkire FFT Combo Grace Libes Grade faces i
100. e values View orders individually or overlay all or selected orders on the plot Bn Pe Eat Are ane fae lemp bg ead oi S74 4888 Go 8 Figure 4 36 Bode Plot 4 32 SKF Analysis and Reporting Manager User Manual Plots Plot Types WA rir inir W Bot Ar ane is m ka oe ip TEREST ET Figure 4 37 Nyquist Plot To view selected orders on a Bode or Nyquist plot e Select the Graph menu s Multiple plot Map ranges option and specify the required orders To clarify the phase behavior of the machine e Unwrap phase values by identifying phase changes greater than 180 degrees e Toggle this option on off from the Graph menu s Y Axis Scale Unwrap phase option Use the Display Style editor to customize the appearance of Bode and Nyquist plots As you move the mouse the new layout previews as a set of dotted lines Transfer Function Plots You can display Transfer Function data by selecting the relevant CSV files when uploading from the Microlog Transfer Function plots contain three graphs amplitude and phase plots of the Transfer Function and coherence SKF Analysis and Reporting Manager 4 33 User Manual Plots Plot Types od ee Most seasane e a i mi t zE si miea nem e gt A f iesus i a L Figure 4 38 Transfer Function Plots The coherence plot displays any value below 0 8 in red to aid validation This level is stored as part of the current display
101. eco C Crsete a separate cubgul lor each channel rans lt lt Back new gt 3 Chie F Heb Figure 7 11 Definition of Report Page To generate separate documents for each individual trace in the data e Enable the Create individual files for each record checkbox e If your selected data contains CTC results enable the Create a standard report checkbox to output data from CTC results to a standard report To generate separate plots for multiple channel data e Enable the Create a separate output for each channel trace checkbox The generated Word report displays a separate graphic plot for each channel e Click Next to display the Selection of fields and bookmarks page for standard reports or the CTC results page for CTC files SKF Analysis and Reporting Manager 7 11 User Manual Reports Word Reports Report Generator for Microsoft Word Check to Conformance Results On the Check to conformance results page set up your Word report fields to receive the CTC results associating bookmarks in the chosen document template file dot with report elements in your data Report Generator for Microsoft Word CTC Demo Data Check to conformance results For Check to corfomernce results lies you may otp a lable corkaring the check reculs and optionally nchide the machine graphic Choose the book marks required far these Iwo held Tebe CT CT able x Machine v You cen include the mubpl
102. ect Other type the delimiter in the text box As you change these settings ARM automatically analyzes the import data to see if it fits and displays the results in the status panel at the bottom of the page e Click Next The First Line page displays SKF Analysis and Reporting Manager 8 3 User Manual Import Export ASCII and Excel Import Wizard Import from File Wizard First Line Page On the First Line page specify the first line containing data values and the first column in the selected first line 2 imoort from file 40m Pe Pals orgy Taie Fumo 17u PD N Ds aE Res ed oer DB eT a eH Se Ce ate tL Number gf inga len expeectec 1500 Line Pees ganina to pk dee Meat ie ened colin Mor angel the hosan Tiii hans rot cnh bdenia theses areo Erat ina ion input Fina pokni or npt Figure 8 2 Import from File Wizard First Line Page e Select the first line for input using the First line for input up down arrows ARM highlights the line in the upper panel as it is selected the contents of this line display in the text box next to the First line for input control e Select the first column for input using the First column for input up down arrows The contents of this first column preview in the text box next to the First column for input control As you change these settings ARM automatically analyzes the import data to see if it fits and displays the results in the status panel at the bottom of t
103. ect a field from the list of available field codes The selected field code displays in the Field code text box below the list Click OK The selected field code is inserted into the Enter notes dialog s Notes for record text box gt Ifyou use the E field code you should follow this with the date time specifier required to format the record date time Otherwise the field is formatted the same as the default date time field code D SKF Analysis and Reporting Manager User Manual Plots Notes and Annotations The following show the date time formatting strings available when applying a field code of E to record notes User Manual d Displays the day as a number without a leading zero 1 31 dd Displays the day as a number with a leading zero 01 31 ddd Displays the day as an abbreviation Sun Sat using the strings given by the ShortDayNames global variable dddd Displays the day as a full name Sunday Saturday using the strings given by the LongDayNames global variable m Displays the month as a number without a leading zero 1 12 If the m specifier immediately follows an h or hh specifier the minute rather than the month displays mm Displays the month as a number with a leading zero 01 12 If the mm specifier immediately follows an h or hh specifier the minute rather than the month displays Mmm Displays the month as an abbreviation Jan Dec using the strings given by the ShortMonthNames global variable
104. ed Enter the spend in RPM 60 Figure 4 7 Enter Speed Dialog For example if the machine was running at 60 rpm you would enter a speed of 60 e Enter the speed required and click OK Plot Window The plot window allows you to view any ARM data in a separate floating window Sa EO LFA SiG Cada eu ae tele oa oy E er E a E GER Tima Goren CHi g C1 Peto From 408 PH PK V Chl Y Axia from 0K PH PEE NIPI 4 37 15 FA I 000 Pure jga i Tem a OF Araian and Reporting Maraga v2 0 Copyrght So Graa 2014 Figure 4 8 Plot Window 4 6 SKF Analysis and Reporting Manager User Manual Plots Plots Overview To view a record in a new plot window e Select the record in the hierarchy and choose the View menu s View in a new graph window option A new plot window displays gt Data displayed in each plot window is a separate copy of the record selected in the main window Any changes made to this data do not reflect in the original source unless you choose the File menu s Save to source option When you close this window if you have made any changes to the data ARM prompts you to update this data back to the source in the main window If you choose Yes the record in the graphical display window overwrites the original source gt You can only save to the original source if it is still open on the ARM main window Also if you open the same record in two graphical display windows and save from one you
105. eless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite and any and all user manuals The term Software also includes any supplemental add on or plug in software code provided to Licensee in the course of receiving Product Support Plan services from Licensor The term Software shall not be construed to include the source code for Software for Wireless Monitoring System V T SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software within the SKF ptitude family suite 2 LICENSE a Grant of License Licensor grants b Licensee pursuant to the terms and conditions of this Agreement a non exclusive non transferable and revocable license to use the Software in strict accordance with the terms and conditions of this Agreement including any concurrent use network or other limitations set forth in subsection b below All rights not specifically granted by Licensor under this Agreement are retained by Licensor and withheld from Licensee Installation and Use Rights Licensee shall use the Software only on its internal computer equipment whether such equipment is owned leased or rented at the Licensee s principal business office The following paragraphs govern your installation and use rights with regard to the Soft
106. ema Data Bat paths Co yy Donme Anaye aed Repor ing Manaya dala aroen F L2 J Figure 6 21 Choose Trend Set Dialog e Click Browse to display trend sets located in another directory You can edit any existing trend set by selecting it here and clicking the Edit button This displays in the Edit trend dialog Eit trend CTE Dermo Mata Hame of trend ETE Dema Dats fies orreniy selected for thes tend PURLEEST PIPE LpH_ PURLEE ST FIPS apes RUHET FIPE 4 ir PUMLMERPIOOST 1 2 pds_ PUHLMOAIT D2 1 pda_ RADAT pds PJAMDA PUNTI INHI aLp Figure 6 22 Edit Trend Dialog SKF Analysis and Reporting Manager 6 19 User Manual Check to Conformance Module Support Trending of CTC Data The Edit Trend dialog allows you to change the name of the trend and remove any results files back to the main data directory thus removing them from the trend To change the name simply edit the text in the Name of trend control upon closing this dialog ARM renames the trend folder using this name Whenever a trend is generated from this folder the new name is used as the trend name The Files currently selected for this trend list box displays the names of the files currently located in the trend directory When you select one of these files two buttons become available Remove Allows you to remove the selected file from the trend Summary Displays a summary of the contents of the file gt Ifyou remove a fil
107. ement by Licensee Licensee shall pay all costs and expenses incurred by Licensor in exercising the Licensor Audit Rights including without limitation all attorneys fees and agent fees incurred by Licensor If Licensor concludes that no violation of this License Agreement has occurred Licensor shall bear all costs and expenses incurred in exercising the Licensor Audit Rights If Licensee obstructs restricts or otherwise prevents Licensor from conducting a full and unrestricted audit Licensee shall bear all costs and expenses including attorneys fees incurred by Licensor in enforcing this Section 2 h before any court or judicial tribunal iv Frequency of Audits Licensor s Audit Rights shall be exercised no more than two 2 times in any one calendar year i Validity of Intellectual Property Rights In any action dispute controversy or lawsuit arising out of or related to this Agreement Licensee shall not contest the validity of Licensor s Intellectual Property Rights related to the Software Licensee hereby agrees that it has had an opportunity to investigate the validity of Licensor s Intellectual Property Rights and acknowledges that Licensor s Intellectual Property Rights related to the Software are valid and enforceable j Material Terms and Conditions Licensee specifically agrees that each of the terms and conditions of this Section 2 are material and that failure of Licensee to compl
108. ered into by and between SKF USA Inc and or SKF Condition Monitoring Center AB hereinafter referred to collectively as the Licensor and any person or business that executes this Agreement by clicking the I agree icon at the end of this Agreement or by accessing using or installing the Software Licensee or You Licensor and Licensee shall be referred to collectively in this Agreement as the Parties BY CLICKING THE ACCEPTANCE BUTTON OR ACCESSING USING OR INSTALLING THE SOFTWARE OR ANY PART THEREOF YOU EXPRESSLY AGREE TO BE BOUND BY ALL OF THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT THE BUTTON INDICATING NON ACCEPTANCE MUST BE SELECTED AND YOU MAY NOT ACCESS USE OR INSTALL ANY PART OF THE SOFTWARE 1 DEFINITIONS a Derivative Works The Term Derivative Works shall have the same meaning as set forth in the U S Copyright Act as amended from time to time in title 17 of the United States Code b Effective Date The term Effective Date shall mean the date on which Licensee assents to the terms of this Agreement by clicking the I agree button at the bottom of this Agreement c Intellectual Property Rights The term Intellectual Property Rights shall mean all rights arising or protectable under the copyright trademark patent or trade secrets laws of the United States or any other nation including all rights associated with the
109. erfall Dialog Use the Create waterfall dialog to combine a group of files into a single waterfall plot Specify how to find the files and sort the records before combining into a waterfall plot You can select any file types supported by ARM all records extract and then sort accordingly Create waterfall Lise nis window fio select either a dinectory or a selection of fies bouse to merte a singe wabertall oboe Source opto Select a number of fies bo import T pon all fies froma single directory Sort options Ne sore 2 sort the records using their fle names alphabetic sort Oh Sort fe records weg ther Ale dal fbret 2 Sort the necords using ther record date ames LX corer Figure 4 32 Create Waterfall Dialog e Specify options for finding files in the Source options group Select a number of files to import Select the files manually Import all files from a single directory Select a directory All files from the directory load 4 28 SKF Analysis and Reporting Manager User Manual Plots Plot Types e Specify options for importing records in the Sort options group No sorting Inserts the records into the waterfall in the order they were found Sort the records using their file names alphabetic sort Sorts the records alphabetically based on their file names Sort the records using their file date times Sorts the records by individual source file s date Sort the records using their record date times Sorts the
110. erlay Bode and Nyquist plots Urplay stybe editor Signahae Watedall Specroyas Oia Other Grd ines 4 Cverlop cursor siye Bode options O Single line E Label inside plot Double tine Cl Single colour ine C Shoat bre F Proportional x axis Cross har Coheence ophons For plats of oohestence dala you can net a level below hich he gaph ine is Gobouted red Ft helps bo denliy mabi daba ports Cohetence level 0 1 08 Figure 4 16 Display Style Editor Other Tab Fields include Overlay cursor style area Single line Cursor line links the cursor point on the trace to the center origin of the plot Double line Uses a thicker cursor line Short line Cursor line is a short vertical line standing on each cursor point Cross hair Cursor appears as a crosshair shape Bode options area Single color line When enabled the waterfall uses the signature line color for all spectral lines If this item is disabled the six waterfall line colors defined on the General tab are used colors repeat for maps with more than six spectra Proportional x axis When enabled spectra is proportionally spaced using the current active y axis information If disabled spectra are evenly spaced It is recommended to enable the Proportional x axis to achieve a realistic view of the machine characteristics during transient analysis Labels inside plot When enabled controls where the information panel showing or
111. es the oomiimok below to qad Ghese dedio Attia dneni Figure 9 3 Directories Tab e Specify the in the Main data directory text box To change one of the associated data directories e Select a directory from the Associated directories drop down list The fields below this activate allowing you to make changes To link the associated directory to the main data directory e Enable the Same as main data directory checkbox the value in the edit control is ignored and the main data directory is used instead gt If the directory uses the main data directory as a root when you change the main data directory the other directory also changes gt The associated data directories are used for initial loading and saving of these data file types but if you load or save to a different location this new location becomes the default until the next time you start the application when it will revert to the setting made here e If the Same as main data directory control is disabled enter the path in the Folder text box 9 4 SKF Analysis and Reporting Manager User Manual System Preferences Program Options Setup Tab On the Setup tab set up various external resources such as the CTC Setup Generator used for gathering CTC data Program options heag Fomatng g Seang Das shes Rame Directories Fike options Seluc LindatenPepate Othe CTC Setup Gereiatos Erier here tte ull path aed be nara of the CTC Seiup Generates dopkoa
112. et font sme outer fe Ce a Figure 7 22 Word 2003 s Options View Tab Checking the Bookmarks control will make all bookmarks visible in your document as grey beams as shown here Analysis name Units Overal level Spectrum RSS Record date Paak vale Figure 7 23 Visible Bookmarks in Word Template This makes it easier to see where you have placed them although there is still room for confusion as you will see gt The Bookmark dialog allows you to view the bookmarks in the document sorted by name or location it is easier to use the latter when adding new bookmarks to a template 7 26 SKF Analysis and Reporting Manager User Manual Reports Creation of Templates for Word Reports Bookmark Bookmark name Anal ysistlame Anatase Dette FMax Graph Motes MumLines Overal PeakValue Record Mame Sort by Hane 1 Location C Hidden bookmarks Cancel Figure 7 24 Bookmark Dialog gt Bookmark names must contain no spaces To add a bookmark e Place the cursor at the position in your document where the bookmark is to go This may be in free text within a text box or in a table e Choose Insert Bookmark to display the Bookmark dialog e Type in a name for your bookmark e When you have entered the name click Add to add it to the list the Bookmark dialog will close A grey l beam will appear in your document at the chosen location e To c
113. eys The highest harmonic moves one spectral line at a time and the remainder move in proportional increments To jump the harmonic lines to their nearest peaks e Select the Cursor menu s Cursor to peak option or press Alt P To remove the harmonic cursor e Press Ctrl H again or select another cursor from the Cursor menu 4 38 SKF Analysis and Reporting Manager User Manual Plots Cursors Side band Cursor Side band markers consist of pairs of markers evenly spaced on both sides of a side band cursor reference position Side band markers are referenced as located from left to right around the center cursor Side band markers to the left of the center cursor are referenced with negative numbers their associated markers to the right of the cursor are referenced with positive numbers To display a side band cursor e Select the Cursor menu s Side band cursor option or press Ctrl B Initially the side band cursor displays one pair of markers at a single spectral step from the center cursor Use the left and right arrow keys to decrease or increase the frequency step Fe BE Cure fee Tose Teng baap Gi Hoe E am oiii entan BoB Treia Persian ahora JAF Haprror L7 Ra iag boa i Figure 4 45 Side band Cursor To remove the side band cursor e Press Ctrl B again or select another cursor from the Cursor menu SKF Analysis and Reporting Manager 4 39 User Manual Plots Cursors Threshold Cursor
114. f ARM e Copy this file from the data directory and write it to the program directory overwriting the existing copy If your users then remove their local copies of this file the new default settings are used the next time they run ARM SKF Analysis and Reporting Manager 11 1 User Manual Troubleshooting DSP Troubleshooting Reports Set Up Restore reports one of two ways delete the settings manually or use the instructions for clearing general program settings described below To delete the settings manually e Exit ARM and locate the ASP report settings prs file on your computer gt These files are located by default under All users Application data or Program Data in later versions of Windows e Delete this file The default settings are used the next time you run ARM To make the settings available to all users if using a networked version of ARM e Copy this file from the data directory and write it to the program directory overwriting the existing copy If your users then remove their local copies of this file the new default settings are used the next time they run ARM General Program Settings You can clear all registry entries where all ARM settings are stored and your own graphical display style and reports settings by running the program with a command line switch To clear all registry entries e Create or modify a shortcut to the program and add C to the command line usually the Target e
115. ferent than the file and offers you three choices the same as the following three options You can view a summary of all differences found Update any new or changed records Choose between adding changed records to the end or overwriting any with the same name set this using the If updating new or changed records controls Ignore changes and continue Any differences are ignored and the selected data stream file opens Reload all records discarding those in the data stream The source opens and all records in the data stream are overwritten by those in the source all settings such as notes cursors and annotations will be lost gt Enabling this option slows down the source opening operation This should not cause any noticeable delay however if the delay is too long you can disable this option In this case you must be aware of how all your data is stored Buffer wav files over a specified size Buffering is a streaming mechanism used to prevent ARM from loading a large WAV file into memory at once With files as large as 2 GB in the Time Signal module this option is necessary to prevent overloading your computer resources Uncheck to disable this feature File size Specify the size of WAV file at which buffering is used The default size is 2 000 KB 2 MB You can set any value in KB here Important During buffering operations the software still uses the binary stream file to store local settings this fil
116. formation except as authorized by this Agreement Licensee shall not disclose the Confidential Information concerning the Software including any flow charts logic diagrams user manuals and screens to persons not an employee of Licensee without the prior written consent of Licensor LIMITED WARRANTIES a Licensor warrants that the Software will perform substantially in accordance with its documentation for a period of 180 days from the date of shipment of the Software provided however that the foregoing warranty only applies if i Licensee makes Licensor aware of any defect with the Software within seven 7 days after the occurrence of the defect ii Licensee has paid all amounts due under this Agreement and iii Licensee has not breached any provision of this Agreement The foregoing warranty does not apply in the event that i the Software and documentation have been subject to misuse neglect alteration modification customization improper installation and or unauthorized repair ii the Software or any associated software or equipment have not been properly maintained in accordance with applicable specifications and industry standards or have been maintained in unsuitable environmental conditions or iii Licensee has used the Software in conjunction with other equipment hardware software or other technology that created an adverse impact on the operation functioning or performance of the Software
117. g 13 Age 2007 01 2 2 Spectrum CH1 1 52930 to 0 O7 10837 Hareeng 13 Age 2007 01 2 Spectum CH1 2 03806 s to 0 438572 s Hanning 13 Age 2007 01 2 2 Spectrum CH1 2 54883 to 4 948438 Hareeny 13 Age 2007 01 2 2 Spectrum CH1 3 05859 a to 1 45820 s Hanning 13 Ape 2007 01 20 xn Char 2 Spectum CH1 355835 to 1 96797 Hanning 13 Api 2007 01 20 AV FET From Channel 1 2 Spectrum CH1 4 07813 to 24777 Hannng 13 Ap 2007 01 20 AV FFT From Channel 1 2 Spectrum CH1 4 55709 s to 230750 Hanning 13 Ap 2007 01 20 AZ EET Boom hannal 1 gt Snart FHI AIRE to TI a Hanan Larn OMIT N v lv OK x Cancel Hep Figure 4 28 Choose Records to Include in Display Window e Use standard Windows commands to select the records required or right click to display a menu with Select all and Clear all options Note that this option does not remove any records from the underlying data structure it only omits them from the waterfall display The Graph menu s Waterfall Change Z Axis information option is available when the record contains multiple z axis information The selected data is used for the labeling at the end of each spectrum and the optional proportional spacing of the waterfall To change the z axis information e Click the Graph menu s Waterfall Change Z Axis information option The Please choose a Z Axis annotation window displays e Select the annotation type to use on the waterfall display and click OK
118. g octave spacing 1 3 Octave High Automatically sets up 31 bands between 20 Hz and 20 kHz using 1 3 octave spacing 1 3 Octave Mid Automatically sets up 31 bands between 10 Hz and 10 kHz using 1 3 octave spacing 1 3 Octave Low Automatically sets up 31 bands between 5 Hz and 5 kHz using 1 3 octave spacing If this entry is set to non manual you cannot edit band extents Having created octave or third octave bands you can manually edit the bands by setting Preset Bands back to Manual SKF Analysis and Reporting Manager 6 13 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Weighting From the drop down list select the type of spectral weighting to apply Frequency Mode Use this to select the preferred frequency units either Hz or CPM Note that this is a setup generator display option only and is not stored in the setup Band Definition Use this to select how band frequencies display either Centre Span or Edges Note that this is a setup generator display option only and is not stored in the setup Label Click the cell and enter a descriptive label that indicates the measurement type for each band Note that the band s Units setting determines the measurement type Beg Freq Center Enter the frequency band s beginning center frequency in Hz CPM depending on Frequency Mode and Band Definition Together the beginning center and end span freque
119. g template and rename it e Create a new document and select Document template from the Save as type list box when you save it As already mentioned it doesn t matter where you save the template ARM comes with a set of predefined templates that are stored in a Report templates folder within its data folder Analysis and Reporting Manager data within your standard documents path Adding bookmarks To add a bookmark to a template choose Insert Bookmark from the menu The Bookmark dialog will appear Bookmark Sortbyi 8 Nama L Hidden bookmarks ae Figure 7 21 Bookmark Dialog Before doing any serious bookmark editing you should make a temporary change to your Word set up that will make the whole process a lot easier e Goto Tools Options and check the Bookmarks checkbox on the View tab e In Word 2007 go to the Microsoft Office logo upper left corner and look for the Word Options button Look for the field where you can set a preference for showing bookmarks SKF Analysis and Reporting Manager 7 25 User Manual Reports Creation of Templates for Word Reports FDEP Famnathing marks _ Tab characters Speci O Paragraph saris Pant and Web Layout orme 7 Drawings E White space beteren pages Print viem oniy Steer anchors C Background colors ered images Pring views ony Tet boumdres F vega rer Print vere arty Dutina and Peenal imgbrr Chivas io ww aya arga 0 Ci pr
120. gli 988 Oa 35h Pa Se 7 fe s8 TAF Cobararce hin LYH 3 Frecpiteetp HE Priir iy HE an kt El y ZERULE FAF Raal a DOEK FE Traag pm AH a PER E L BEUTA E A Ta AA FE T Prepi Ha 2 Prugeascy Hr hiii Figure 4 42 Multiple Plots Function As with dual signature plots you may control each plot separately or you may control all plots with similar traces by enabling the Control all option on the Graph menu 4 36 SKF Analysis and Reporting Manager User Manual Plots Cursors Cursors Cursor Overview Several dynamic cursors are available single harmonic side band difference and power All cursor position and status information is recorded in the data structure and preserved when saved To initiate a cursor on any plot e Press the right and left arrow keys on the keyboard to move it across the plot or click the mouse on the position You may also drag the cursor with the mouse e Press Ctrl Left on the keyboard to jump to the next peak to the left and Ctrl Right to jump right Peaks are selected by finding a point that is more than 25 of the signature peak value and that has two lower lines to the left and two lower lines to the right To move the cursor to the peak value e Select the Cursor menu s Cursor to peak option or press Alt P On spectrum or waveform plots the cursor moves to the peak value in the currently displayed range On waterfall plots this initiates a peak tracking cursor suitab
121. h re pow coerce i Ae irdyo y Deo Dita dp verid gt Dew Reta FS Pv ewe B wy aoea Bi chy worn t Why oren ELEC 4 Damonia 4 DewData tha Value OGOL Wade mao Figure 4 1 Plot Display Select the full record level to display all the traces for a group e g a waterfall or dual spectrum display or an individual record to display a single record within the group Depending on the selected record applicable plot options are enabled on the Graph menu and toolbar SKF Analysis and Reporting Manager 4 1 User Manual Plots Plots Overview To select a plot type e Select the Graph menu s Change plot type option To display a record in a separate window e Select the View menu s View in a new graph window option To customize the appearance of graph plots e Select the Graph menu s Display styles Edit Display style option Graph menu Use the Graph menu to customize how data displays in a plot the following options display depending on the type of record you select Cursor F X axis Y axis Fk Zooming F Scaling j Change plat type Orbit polar and Nyquistoptors F Annotations F a Full window Fil Display styles F Waterfall options Mel Remove DC Offset Check to conformence reports Figure 4 2 Graph Menu Cursor Select a dynamic cursor to display on the plot X axis Select Hz CPM or Orders when displaying frequency domain data for data not captured in
122. he Print Preview window to show how reports will look when printed using the current printer You can save the report to file from this window A toolbar at the top of the window contains controls for changing the view of the report and for outputting to the printer or clipboard Exit print preview You may use keyboard commands Alt X Escape or Alt F4 Whole page view Page width view Print size view Go to first page You may use keyboard commands Ctrl PageUp Go to previous page You may use keyboard commands PageUp Go to next page You may use keyboard commands PageDown Go to last page You may use keyboard commands Ctrl PageDown Copy to clipboard You may use keyboard commands Ctrl Insert or Ctrl C C E 2 6 jee Print The printer dialog displays You may use keyboard commands Ctrl P Display a special toolbar containing controls for setting the page and zoom and for saving and loading reports to and from file You may use keyboard commands Ctrl T la Special Toolbar Controls Page 1 E Select the page to view za 7 i we Set the percentage zoom H Save the report to file You may use keyboard commands F2 or Ctrl S Load a report from file You may use keyboard commands F3 or Ctrl 0 SKF Analysis and Reporting Manager 2 9 User Manual 3 Data Transfer Data Transfer Overview ARM s Mobile Device Viewer wizard allows you to up
123. he Samples and Spacing overlap fields the zones update and the spacing in samples and seconds between each spectrum displays in the information panel above the Process button SKF Analysis and Reporting Manager 5 13 User Manual Digital Signal Processing The Digital Signal Processing Window od Caner Laaa Tira m fiekcoan CHi amarai grei Piro airaa Pi item Ch Tn eee Figure 5 16 Axis Range When you have a multiple channel recording and have selected the Delta RPM processing option ARM performs a speed check on the generated zones and draws a zone in red if a speed variation greater than 5 is detected across the zone e Move your mouse cursor across a zone to display a summary for that zone in the information panel The text is also in red to highlight the speed warning e Zoom in on the waveform to see how the zones are drawn and numbered Verve Duman OMT pm RUN UF OUD RPM Charai Ihe IIN el 8 m 2 m4 ms 15 164 ws 139 m na ni Gar 13 Es Vaa SS en Figure 5 17 Waveform 5 14 SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window Autofit If you are processing the data with the Spectrum Delta Spacing option ARM automatically checks your settings If they add to a sample length that is greater than what is available a warning message displays when you click the Process button If a warning displays you must reduce the Samples
124. he page e Click Next The Amplitude Format page displays 8 4 SKF Analysis and Reporting Manager User Manual Import Export ASCII and Excel Import Wizard Import from File Wizard Amplitude Format Page On the Amplitude Format page specify the input units and scales amplitude format of the data values a ee xls oni TS hemis Firion Fis E eet eae or Se D TAH PELETER OMNI 0 a OFE ota ate SNIT 01H ET TOTO Po DIELEENLTE DEHNI SHE M ap P eii Number gf inga ines expected 110 Une these condsols a peket ihe ipui ursi sral soak Po your t lt lt Back Pleate chases the piapia forest Lf toot j set Ampie Ji Clipp cene rth tn al lar Lira Acs Pte Figure 8 3 Import from File Wizard Amplitude Format Page e Select the amplitude format from the Please choose the amplitude format drop down list Options include Amplitude only The data values contain linear amplitude magnitude values Amplitude in dB The data values contain amplitude values expressed in Decibels When you select this option the dB reference control enables allowing you to specify what value to use as the dB reference Real plus imaginary The amplitude values contain real and imaginary values in adjacent columns of the input Magnitude plus phase The amplitude values contain linear magnitude and phase values in adjacent columns of the input gt The Amplitude Format control allows you to specify
125. horn hee aire ou bo miia Yea CTE pel up opirali yai SEP Anapat ani Aapalng Marnsa Sel Up Gersan C Program Fies SKF AS Analoe ard Reporting Marager Cact L Language ielts Chocee language Pinter fied Verdana 10 pt C ew i Figure 9 4 Setup Tab Fields include CTC Setup Generator Allows you to specify the location of the application used to create and edit CTC setup files To change the application used to create and edit set up files e Enter the full path and application name in the Set Up generator control gt CTC setup files are managed using the CTC File Manager window Language selection Use the Choose language button to select between the available languages Printer font Use the Font button to specify the font used to print text summaries SKF Analysis and Reporting Manager User Manual System Preferences Program Options Formatting Tab On the Formatting tab specify settings that control number formatting Program options Durechores Fie optiona Setup Lice Peps rer Genel Formatting gaang Daa sies Source Kurnia fiiia Fardre Humba of agea koue bow sapiu yakit CI Use science molation lor al irea valar z Fred aing lor andad enginsenng indy date kaumba hiaai abarra Huba cd parehe ani Larger li ifra ranit Humber of signdicart gures for heguency domar Figure 9 5 Formatting Tab Fields include Number of significant figures for amplitude v
126. i date ciasta Source dale F Ocluds nousce dete on dete cream fe Clicka A sous dats in daa shaan le Save hee file alter dearioad C eo i Pee Figure 9 6 Saving Tab Fields include Automatically save data in data stream files If enabled ARM automatically saves data imported from data sources into data stream files located in the current data directory Use the same name as the source If enabled ARM automatically creates a filename based on the name of the root node in the data structure gt When ARM generates this file name it checks for the presence of a file with the same name If this file exists the software then compares the source in that file to the current one and only if they are different does it generate a new file name by adding a number to the default name Use the same directory as the source data If enabled ARM ignores the current data directory when saving the data stream and saves it in the same directory as the source data This option is ignored if the source data has been loaded from a removable drive such as a card reader Exclude WAV files from automatic save If enabled data loaded from WAV files as data stream files is not automatically saved You are prompted to save the data stream when closing data structures read from wav files Save desktop contents on exit If enabled at startup ARM loads all of the available data structures that were open when it last
127. icrosoft is detected the Software will not install until such time as Licensee installs a valid and Software compatible copy of an Oracle database or a Microsoft SQL Server database and consents to the license terms of such database software application If Licensee does not agree to the terms of the Oracle database license or the Microsoft SQL Server license or if the Licensee fails to install such database software the Software will not work Licensee is responsible for maintaining a valid database license in accordance d with the Oracle or Microsoft license agreement which ever is applicable at all times Restrictions on Use Licensee may use the Software only for its internal business purposes and on the identified equipment on which the Software was first installed or for which it is otherwise licensed provided however that Licensee may temporarily use the Software on a back up system in the event that the primary licensed system is inoperative or test system not used for production but solely for the purposes of testing the Software Licensee may not use the Software for any other purpose Licensee shall not i permit any parent subsidiaries affiliated entities or third parties to use the Software ii use the Software in the operation of a service bureau iii allow access to the Software through any workstations located outside of Licensee s principal business offices iv rent resell lease
128. in any such court has been brought in an inconvenient forum and otherwise waive any and all objections to the forum 18 EXPORT CONTROLS Licensee shall not export or reexport directly or indirectly the Software without complying with the export controls imposed by the United States Export Administration Act of 1979 as amended or any future U S export control legislation and the regulations promulgated thereunder 16 17 GOVERNMENT END USERS If Licensee is acquiring the Software for or on behalf of a subdivision of the U S federal government this Section 16 shall apply The Software was developed completely at private expense is existing computer software is a trade secret for all purposes of the Freedom of Information Act is restricted computer software and in all respects proprietary data belonging solely to Licensor and all rights are reserved under the copyright laws of the United States Use duplication or disclosure by the Government is subject to restricted rights as set forth in subparagraphs a through d of the Commercial Computer Software Restricted Rights clause at FAR 52 227 19 or for DoD units the restrictions as set forth in subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 TRADEMARKS Licensee agrees that SKF ptitude Analyst SKF ptitude Inspector SKF ptitude Observer SKF ptitude Decision Support or any other software w
129. ing Manager 4 7 User Manual Plots Plots Overview Update Back to Source The Update back to source dialog displays when you try to close a window in which you have made changes to the data ARM prompts you to update this data back to the source in the main window e Click Yes to record data in the plot window and overwrite the original source e Click No to discard changes made to this data e Click Cancel to return to the plot window gt You can only save back to the original source when it is still open on the ARM main window To save the data directly to an ARM data stream file e Select the File menu s Save as option on the graphical display window Plot Control When displaying a record or plot containing more than one trace you may control the traces simultaneously if the traces are similar same analysis type number of lines and frequency range For example positioning the cursor or setting zoom on one plot updates all plots in the same way To control all plots together in this way enable the Control all option on the Graph menu This setting is enabled by default in all suitable records If no traces in the record or display are similar the Control all option is disabled If you enable the Control all option with a display whose plots have different settings changing any setting forces all plots to conform For example if the plots show different zoom magnification levels and you choose Reset zoom all plots re
130. ired display ARM can display any group of frequency domain spectral data in a waterfall plot You can also create custom waterfall plots from a mix of any records of the same analysis type When you click a record containing multiple spectral readings a waterfall automatically displays SS nahn ami Reporting baraer Bie Eden y i a a i A Ea A ji i 6 4 tma CO 2 Fise Aei ere Spectra CHi webatel pr crm LIJIT 1 1003 aH CAC Deane Dats 5 Sa a DATA E Age MHE HSTORES A HDO H ae AT 7 DART aye FAF E Aa FAP eth core pot coheenoe H Ay ete iaa rm P O ema BF ihep eo Depi iag ee bs Copet D F Gee Mil Figure 4 24 Waterfall Plot e Use the options on the Change plot type menu to toggle between the waterfall and other display types such as overlay and multiple plots Waterfall plots may be shown with their z axis spaced evenly or proportional to any z axis information contained in the data e g speed values from a run up SKF Analysis and Reporting Manager 4 23 User Manual Plots Plot Types To switch between proportional and even spacing Click the Graph menu s Display styles Edit display style option and enable the Proportional Z Axis checkbox on the Waterfall tab Zoom and scale functions work the same as they do for single or dual signature plots To change the layout using the mouse e point E SS Anah ami Reporting Maer Be de am P Eat bai Aay E i bei Hea af
131. ise with zero degrees at 3 o clock Balance Table and Polar Plots You can display data loaded from the Balance Module in two forms e A table replicating the view you have on the Microlog e A polar plot showing the amplitude and phase measured at each stage of the balance run These views are different from other plots in that they generate from the root level of the balance data structure e When selecting the balance data s root node select the View menu s Graph option to display either the table or polar plot e After the initial display you can toggle between the two views by selecting the View menu s Graph Balance table or Graph Balance polar plot 4 30 SKF Analysis and Reporting Manager User Manual Plots Plot Types Figure 4 34 Balance Table Awa aroun gt kagal Boit abii mm Figure 4 35 Balance Polar Plot SKF Analysis and Reporting Manager User Manual Plots Plot Types Bode and Nyquist Plots Use Bode and Nyquist plots to display Run up Coast down data Bode and Nyquist plots contain one or more amplitude phase pairs of values plotted against the measured running speed of the machine Each amplitude phase pair represents an order from the data The Run up Coast down module also captures the overall level of vibration no phase data is recorded The Bode plot shows two Cartesian plots the upper plot displays the amplitude values and the lower plot displays the phas
132. isplay Style Editor Axes Tab The Axes tab defines how to tick and annotate the axes on all plots Urplay stybe editat watedal Speckogiam Cibt Other Gridfines Axes Himin seat sipa Bure iks Aar nolalari E Fut Full O Ends EEr my Mone iC Mone Wersal ws ciple a i dat ngala G Fid E Fa D Ends O Ends m J Home 3 Nore E Show Zoom incioaiot when zoomed ace Fae Figure 4 18 Display Style Editor Axes Tab Fields include Full Ends or None Specify the Axis ticks and Axis notation for the horizontal and vertical directions Show zoom indicator When enabled a small zoom indicator bar displays at the top left of any Cartesian plot when zoomed in The zoom indicator shows the size and position of the zoom relative to the entire plot 4 18 SKF Analysis and Reporting Manager User Manual Plots Zooming Zooming The Graph menu s Zooming options allow you to change the horizontal scale of the plot The zoom functions works with all plot types You may zoom in and out on a plot in a variety of ways e Using the Graph menu s Zooming options or hot keys e Dragging a zoom bar on the graph using the mouse e Entering the zoom values directly Using the Graph Menu s Zooming Menu Options or Hot Keys To zoom in e Click Zoom in from the Graph Zooming menu or press Z When you zoom in the span of the current plot displayed is halved If a cursor is active the zoom centers on th
133. it does ret amply ell iiba orehan although oaea bera Bakke mig hava Cid on bis recip bo mee ang rionasbon shoul the pirer Wewn Chek on the Chor buton komat tha ankre Cace Zie Figure 4 76 Global Editing Expert Finished Page To review the edits e Click View results A summary window displays all edits If you cancelled the edit this also displays in the summary be Global etitm expert lem DALAJ Sumanary of results TIME HISTORIES Changed units for Channel i Changed units for hannal 7 BOGE Changed units for Owarall Changed units for Order 1 AP QUIST Changed units for dwerall Changed umiba far Grgar i ORBIT Changed units far 5 Now 2002 6 20 00 Changed units for 5 Now 2002 16 20 01 FRF Changed units for FRF Mag Changed units for FRE Phase Changed units far FRE Coherence FAF with some poor coherenga Figure 4 77 View Results e Click Close to return to the ARM main window SKF Analysis and Reporting Manager 4 67 User Manual Plots Rolling Element Bearing Database Global Editing Expert Applying Edit The Applying edit page displays the progress of the edit When the edit is complete the Finished page displays To cancel the edit e Click Cancel You are prompted to confirm that you wish to cancel the edit e Click Yes The Finished page displays Rolling Element Bearing Database Bearing Database Overview ARM ships with a rolling element bearing databa
134. item to include the ordinate value time or frequency Report Gemerabor for Microsoft Word FFT from 404K PR PE CHT T A S Select report tems The followang bet chow all ol Ihe pwl tamt detinedd in the carei iepak chona an dem to edi of chek on the Hew balhon to eala aree kam Chick of Meet bo go bo the page daliring fie output Repot items 1S Repot tem ikre dee Moat se Back Het HM Chose 7 Hep Figure 7 14 Select Report Items Page gt The Select report items page and all pages associated with this page are optional and only display in the Report Generator for Microsoft Word if enabled on the Program Options Updates Reports dialog The Report items list box displays all report items in the selected report To delete a report item e Select the item from the Report items list and click Delete To create a new report item e Click New To edit a report item e Select the item from the Report items list and click Edit When you click New or Edit the Definition of report item page displays allowing you to define the report item When you have finished defining the report item ARM returns to the Select report items page Continue to create and edit report items as necessary e Click Next The report generates and the Select file output page displays SKF Analysis and Reporting Manager User Manual Reports Word Reports Report Generator for Microsoft Word Definition of Report
135. ith the mouse and drag it to its new position or double click to edit the band edges using a window similar to that used to specify zoom values Depending on your display settings the peak values for each spectrum are drawn to the right of the spectra or shown on a power level line drawn on the actual spectrum peaks To remove the peak in band cursor e Press Ctrl U or select another cursor from the Cursor menu 4 46 SKF Analysis and Reporting Manager User Manual Plots Cursors Waterfall Spectral Slice On waterfall plots you can output all of the cursor values to a text window or you can use the cursor values to generate a waterfall spectral slice bm Oir 1 oe ee eee Lf 0 ft 244 a D SB en a es vie ad Bee Tig Mab Figure 4 54 Waterfall Spectral Slice To generate a waterfall spectral slice e Place your cursor at the required position and select Graph Cursor Waterfall spectral slice from the main menu or from the pop up menu The new record displays automatically To output the cursor values to a text window e Select Graph Cursor Output cursor values If there is speed variation in your data so that the cursor does not line up exactly on the peaks you can use the Cursor to peak command or Alt P to make the cursor jump to the nearest peak value within a narrow band around its current position You may press Alt P several times if necessary to get the required positi
136. ithin the SKF ptitude family suite and the trade dress logos and other designations of source used by Licensor to identify the Software are trademarks or registered trademarks of Licensor Licensee shall not use Licensor s trademarks or service marks without the prior written consent of Licensor If the Software contains any active links to web sites you agree to maintain such active links and not redirect or modify them GENERAL PROVISIONS a Complete Agreement The Parties agree that this Agreement is the complete and exclusive statement of the agreement between the Parties which supersedes and merges all prior proposals understandings and all other agreements oral or written between the Parties relating to the use b c d e f 9 of the Software Amendment This Agreement may not be modified altered or amended except by written instrument duly executed by both Parties Any purchase orders or other ordering documents issued to Licensee by Licensor shall not have the effect of amending or modifying this Agreement and shall only serve to memorialize the number of licenses or products ordered by Licensee In the event of a conflict between the PSP Policies and this Agreement the terms of this Agreement shall control Waiver The waiver or failure of either party to exercise in any respect any right provided for in this Agreement shall not be deemed a waiver of any further right under this
137. itten agreement except to Licensee s employees for purposes specifically authorized by this Agreement Licensee understands and agrees that the source code for the Software is a valuable copyright and contains valuable trade secrets of Licensor Licensee agrees not to discover or attempt to discover or assist or permit any Person to discover or attempt to discover by any means whatsoever the source code of the Software h Licensor s Audit Rights Licensor shall possess the right to audit Licensee s use of the Software to determine compliance with this Agreement hereinafter referred to as Licensor s Audit Rights Licensor s Audit Rights shall be exercised in accordance with the following paragraphs i Notice of Audit Licensor shall provide Licensee with at least five 5 calendar days advance written notice of its intent to exercise the Licensor s Audit Rights ii Conduct of Audit The audit conducted by Licensor shall consist of a physical review of the computer hardware software and middleware operated by Licensee at its principal business office and any other office for which Licensor in its sole and arbitrary discretion deems an audit appropriate Licensee shall provide Licensor with unrestricted access to its computer hardware software and middleware in connection with any audit conducted by Licensor iii Costs of Audit f Licensor s audit uncovers a violation of this Agre
138. l Sub Tab Hesserent medwe Pete FFT Corra Grade Labets Grade Sands Grade Boundares Process wares Traretucer Locators Reference Mesmrerent Coro Qerar Dreeared W Resda t CI E2 Figure 6 10 Measurement Measurement Control Tab Operator ID required Enable if entering a unique operator ID is required before taking measurements This allows you to associate a set of measurement results with a specific operator Results to CSV Enable to save a results report in CSV format along with the default report in CCR format You can view the CSV report using Excel after uploading to the PC Machine Picture Tab The Machine Picture tab allows you to specify a bitmap graphic photo or diagram of the machinery type being tested The graphic is user defined and typically shows the test measurement locations on the machine The specified picture transfers to the instrument with the test template and may be displayed for reference during testing The specified graphic must be in bitmap format Recommended graphic size is 240 x 180 pixels at 72 DPI Messrenent Fotre Picture FFT Convoi Grade Labels Grace Sands Grade es Process Aare Figure 6 11 Example of a Specified Machine Picture SKF Analysis and Reporting Manager 6 9 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager e Use the Load button to specify the test template s machinery graphic e Us
139. l plots a bounding zone is drawn on the plot representing the edges of the cursor band Below the x axis at the band edges the frequency value for the edge is drawn To move the edges either click the displayed number with the mouse and drag it to its new position or double click to edit the band edges using a window similar to that used to specify zoom values Depending on your display settings the power values for each spectrum are drawn to the right of the spectra or shown on a power level line drawn on the waterfall s left wall The power level line is also optional To remove the power cursor e Press Ctrl U or select another cursor from the Cursor menu SKF Analysis and Reporting Manager 4 45 User Manual Plots Cursors Peak in Band Cursor The peak in band cursor is available on waterfall plots this comprises two cursor lines with the peak level of the band between these lines shown on the plot You can also have a cursor that shows both the peak in band and the band power at the same time To display a peak in band cursor e Select the Cursor menu s Peak in band cursor option A bounding zone is drawn on the plot representing the edges of the cursor band below the x axis at the band edges the frequency value for the edge is drawn me GA me 0 eee Ge Seco ee an baad O tt R OG E Tpeeres CM agate pa Lee Fah I Figure 4 53 Peak in Band Cursor e o move the edges either click the displayed number w
140. le for plotting a spectral slice through the waterfall e Move the mouse over the current cursor position on the spectrum in question and Ctrl drag the cursor line to its new position To remove the cursor from a plot e Select the Cursor menu s Cursor off option Output cursor values to a summary window using the Output cursor values command and produce a waterfall spectral slice based on the current cursor positions using the Cursor menu s Waterfall spectral slice option DA Cursor valias for FRF Map Chanela Fe Eat Hep ge BA Ao FRF Mag Channee z z i Zz 3 4 B B T a Shep 302 Hz Figure 4 43 Output Cursor Values SKF Analysis and Reporting Manager 4 37 User Manual Plots Cursors Harmonic Cursor A harmonic cursor comprises the reference position and a number of harmonics of this location To display a harmonic cursor e Select the Cursor menu s Harmonic cursor option or press Ctrl H The harmonic numbers frequencies and amplitude values list to the right of the plot e Select the Cursor menu s Output cursor values option to output these to a summary window E i oe a Pa fey leg Da Sp cma eili eng oe EASA A ire Mi han itan 1P T FEF fag fron 1 Figure 4 44 Harmonic Cursor To add or subtract harmonics e Select the Cursor menu s Add harmonic and Remove harmonic options or press Insert or Delete on the keyboard To move the harmonics in small steps e Press the right and left arrow k
141. le output page specify the output path and file names to be generated by your Word report Report Gemerabor for Microsoft Word FFT from 40K PK PE CHT T A Select file output fou ma cuip your rapatt bo Word documen ramad alle the cmd inthe data ducture or named using GLUED jGlobalp Ligue hjani o sah a custom rane lollowed bp a rumber Use second name for files name O Use GUID for ie name Uz tuhoa pane lov iie name Dupa path CADocurments and Setinge kv Dieskbon Browse 4 Click the Next butbon bo run the repost lt lt Back Heat s Clase Puch Figure 7 18 Select File Output Page e Select the file naming convention for each record Use record name for file name Uses the name of the record for the file name Use GUID for file name Creates a GUID for the file name Use a custom name for file name Uses a custom stem for the file name appended with a number to make it unique Enter the stem to use in the Name field gt If the file name generated by the software is already in use the new file takes the same name but appended by a number to make it unique e Specify the folder where the files are written using the Output path text box type it in or Browse to locate an already existing folder If you enter a path that does not exist when you click Next the software asks you if you want to create it e Click Next The report generates and the Reporting complete page di
142. lected data using the same settings as taken from the Digital Signal Processing window and immediately displays the results in a new record Context Menus Context menus are available throughout ARM to perform various operations on selected objects EE SEF Analysis ond Reporting Manaper Pie Got Vere DSP Export Geh Aepots Toos H EG DSP window i E Pece Hira E 07k Jak Dene DATA J g TRE HISTORIES age Channel 1 Ay E y BODE fy Cut Cork oe MDS L Cary ato fe ORT Gt paste car E Aw FAF E A FAF vh ge Daite cred eben BEE Data DUTT Yy H N 4AM 4h Demo DATA IES SAM esni a NE ARM scien Fy chose s BS ARM screens ES AFM sorana My Edi chaplay style a E SAM screens Bi view in a new graph sindon mS Petey 4 T Figure 2 4 Select Objects Export t To view a summary of an object in the list e Right click the object A menu displays e Select Data summary The object summary displays in a summary window and Reporting Manager General Window Operations Select Path for Source Fle Edt Hep r SE S E a a Record 40K PK PK 65536 lines 40000 Hz 13 May 2013 16 37 16 Trace Chl Aws 65536 lines 40000 Hz 13 May 2013 16 37 16 Trace process Time Domain CH1 Acceleration tme domain Engish 9 5 13 2013 4 37 16 PM 65536 40000 Hz g Accelerometer C Documents and Settings ky8907 Desktop ARMI OK PK PK csv Source Me date time 6 13 2013 8 37 24 AM Input channel Charme i Data format Mag
143. lick to output a summary of the selected bearing to a text file You may save or print this file Manufacturer Displays a list of manufacturers for the imported bearings Select All to display all bearings or select a specific manufacturer to display only that manufacturer s bearings Import Click this drop down button to select how to import bearings into ARM you can import an entire bearing database or only specific bearings Select Import from database to SKF Analysis and Reporting Manager User Manual Plots Rolling Element Bearing Database import user selectable bearings from the main database into ARM Select Import from CSV to import a bearing database csv file into ARM gt The CSV file must contain data in the following format MANUFACTURER NAME PART NUMBER CAGE FREQUENCY BALL SPIN FREQUENCY OUTER RACE DEFECT FREQUENCY INNER RACE DEFECT FREQUENCY All frequencies must be specified in Hz and are relative to a running speed of 60 RPM Also there must not be any commas in the manufacturer or part number fields otherwise the data will import incorrectly To import bearings from a bearing database csv file e On the Select a bearing dialog click Import Import from CSV e Browse to and select a bearing database and click Open A message displays indicating how many bearings are available for import e Click Yes to proceed with the import Once the import has completed a message displays indicating how many be
144. load module data from your Microlog using Microsoft Active Sync under Windows gt Under Windows 7 ActiveSync has been replaced by Windows Mobile Device Center Mobile Device Viewer To upload data from your Microlog using the Mobile Device Viewer wizard e Establish a connection between your Microlog and ActiveSync gt Refer to Microsoft com for more information about ActiveSync or Mobile Device Center communication If you do not already have ActiveSync or Mobile Device Center installed you may download it from here as well e Select the File menu s Mobile Device Viewer option from the main menu or press F6 The Mobile Device Viewer wizard displays allowing you to upload data files from your Microlog Additionally you may automatically export the uploaded data to ASCII Excel or UFF if enabled on the Mobile Device Options dialog EE Mobile Device Viewer Mobile Devine Viewer Welcome lo the ActreeS enc Vinea vando hin ulllty aloe poulo unkoed data bom pour signal snakes using Microsoft Ache enc oonmmurecaliorn Delos pou can unload data ee eee pompe snd counei 6s eo aoa ta E olut alee ieee eo wert lla well ec bang loaded rip a binay deta rean fle snd depleeed on fhe eendoe when vou eat the poesia You may shoo epee bo A501 Excel or LFF dee Dick en Meet Io adabish coremeaion yh pou anshi tet gt J Oaer 2 Hee Figure 3 1 Mobile Device Viewer Wizard s Main Window SKF Analysis and Reporting
145. load these files from the Microlog and display them in ARM You can output the results table to a Microsoft Word document and successive readings from the same template can be linked together to allow trending Check to Conformance Results Files ARM can fully support the results files from the CTC module These files CCR files may be loaded from the device or from disk any associated data files in CSV format are loaded along with the CCR file and bound to the CTC results in the data stream file Figure 6 1 Check to Conformance Report with Overview Picture ARM displays the same CTC report that shows on the Microlog s screen SKF Analysis and Reporting Manager 6 1 User Manual Check to Conformance Module Support Check to Conformance Results Files To display the CTC file s results e Select the root node of the data structure and select the View menu s Graph option The report displays in the right panel gt The program defaults to this page for all CCR files unless manually set to a different view Access various options governing display of this report through a context menu on the report or from the Graph Check to conformance reports menu The separate results files in CSV format are also loaded and can be displayed as a multiple or waterfall plot Figure 6 2 Separate CTC Result Files To customize the appearance of this graphic e Right click to display a pop up menu and selec
146. lows you to type copy paste from the clipboard load from a file or use field codes to extract information from the data into the notes Enter notes Notes for record Z Notes visite ow J cnc Agta E Loa Figure 4 61 Enter Notes Dialog To apply a note e From the menu select Edit Notes e Enter the note you wish to display on the plot in the Notes for record text box e Enable the Notes visible checkbox If disabled the note is temporarily hidden e Click the Field button to display the Insert a field dialog from which you can select a field code to insert in the Notes for record text box e Click the Load button to display the Select text file dialog from which you can select an ASCII text file The text from this file is inserted into the Notes for record text box and replaces all existing text SKF Analysis and Reporting Manager 4 51 User Manual Plots Notes and Annotations Insert a field Please choose a edd from this ist Peacond datetime Recon datwtine wath forms Record rame Process name Banckdth Hz Riecord length Spectrum ASS Peak value Position of peak value siolfoat mouris Eeki code O or J xc Pte Figure 4 62 Insert a Field Dialog Insert a Field Dialog The Insert a field dialog allows you to add a field code to a note To add a field code to a note Click the Field button on the Enter notes dialog The Insert a field dialog displays Sel
147. lt lt Back Henw s Y Chose Puch Figure 7 10 Select Report Page e Select a report from the Reports list or click New to create a new report e Click the browse button to load or save a report or to move a report item up or down the list e Click Next The Definition of report page displays To delete a report e Select a report from the Reports list and click Delete 7 10 SKF Analysis and Reporting Manager User Manual Reports Word Reports Report Generator for Microsoft Word Definition of Report On the Definition of report page specify a name and document template file dot to use as a template for the report gt Leave the Template field empty to run a no bookmark report The report applies to all records within the source data you can choose to output the records as they display in their multiple plot waterfall format or as individual traces Report Gaemerabor for Microsol Word FFT from 4k FR FR CHT T A Detinition of report fou must gree pour rao a rame thie wall make il pihtis lor you to select thie repii again hen po Want 1g Webs it wath sone often debe Hame CTC Table wath graphe You can select a Word document template cot ile which contains one or more bookmarks onto which you cen atach dels values a crech plot Iampae C Documents and SetinaskybStrey De CA Repat templates Table CTC wath 12 plots det f Bowie E Create individual fies for each r
148. ly configurable like the others reference the Custom Toolbars section later in this manual The default state contains most of the commands you find under the DSP menu Those commands that require a selection employ drop down list boxes from which you choose the value required this value will also show on the caption for the control Quick FFT gE and Waterfall Functions The Quick FFT Quick gE and Quick waterfall functions allow you to process the selected waveform data straight into spectra without opening the DSP Window If you choose this option for an entire data structure all of the waveform data processes at once gt The Quick gE option uses the gE settings from the DSP Window to process the data Use the FFT Window and FFT Lines controls to select the window filter and number of lines resolution of the resulting spectrum Note that when choosing a subset of the source waveform this way the samples are taken from the start of the waveform e Select Entire record from the FFT Lines control to process the entire record Note that this will disable the Quick waterfall function Use the WF Spectra and WF Spacing controls to define the number of spectra to produce from the source and the spacing or overlap for each successive spectrum Use the gE Band controls to define the range in Hz to use for a quick enveloping analysis Waterfall Spacing On the Waterfall spacing dialog specify the number of sample lines used to separate
149. mplate files defining different document formats for instance a standard home letter a business letter and so on To create a new document using a template you use the File New command in Word which should provide you with a list of templates to choose from When prompted to save a template by Word it usually offers you its standard template folder as a location but you can in fact save templates to anywhere The only difference is that only templates in the standard locations are made available when you choose File New in Word gt The only thing that distinguishes a template from a normal Word document is the file extension everything else is the same This means you can make any document into a template simply by changing its extension from doc to dot gt You must open the template in a specific way in order to edit it if you simply double click on a template Word will assume you are creating a 7 24 SKF Analysis and Reporting Manager User Manual Reports Creation of Templates for Word Reports new document based on that template You can tell this has happened because Word will show the document name as Document x rather than use the name of the template file opened To open a template for editing e Right click on it and choose the Open command instead of the New command There are three ways to create a template e Open an existing template and save it under a new template name e Copy an existin
150. n the Word Report Generator Expert e Click the Show the Report Items options in Word Reporting Expert checkbox Other Tab On the Other tab specify how to output processed data created as new records Program options herea Fomstiing Sang Daa shes Source Directories Fie options Setup LindstenFeposts Dha When crsaiing new 4 facod 2 Dipu record to a nesy gesch vanes hdd epad ia name dala Hnacie ar pance GE Add record to a naw daha hucie Gave keoaton io peered eoods Processed data denci Figure 9 9 Other Tab Fields include Output record to a new graph window The new record is created in a new graphical display window This new data is not formally connected to its source Save this data as a new data stream file using the File menu s Save as command on the graph window or use the clipboard to copy and paste it back into the main window Add record to same data structure as source The new record is added to the end of the same data structure that contains the source The next time you open this data file the routines that compare pds to source detect a mismatch due to the new record in the pds Add record to a new data structure The new record is added to a new data structure created automatically this structure receives all new records during the current session and is named Processed records plus the current date and time SKF Analysis and Reporting Manager 9 11 User Manual System Preferen
151. ncy settings define the frequency band being measured End Freq Span Enter the frequency band s end span frequency in Hz CPM Detection The overall vibration reading for each band is calculated using the specified detection method RMS Peak to Peak 0 Peak or AVG Units Derives the overall vibration measurement type and units For example if an accelerometer sensor is used and Units is set to ips then the captured acceleration spectrum is integrated to a velocity spectrum whose overall vibration in the specified frequency band is measured accordingly Peak Find Click on this cell to enable disable the peak find functionality When enabled the instrument will use the peak vibration level in the band instead of the overall vibration level SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager Grade Boundaries Tab The Grade Boundaries settings specify grade levels i e vibration limits or alarm levels for each test grade at each measurement location orientation H Small Motori Memu urement Machine Petre PPT Contral Grace Labels Grade Bae Grade Boundaries Process Alarms RMS um JAMS fams RMS g RMS pe PIRI fi Js eis Rs to JR OE God Algwable APOE Aat Terane Just Tolerabie Alougn Figure 6 16 Grade Boundaries Tab Location Grade level settings may be unique to each sensor location
152. ng Manager Software ARM provides graphical displays and Word reports of SKF Microlog data e g Time Signal Tracking Transfer Function Check to conformance etc SKF Analysis and Reporting Manager 1 1 User Manual 2 General Window Operations Using the Main Window The ARM main window is divided into two separate panels Using your mouse right click anywhere in either panel to access a context menu based on your current selection Each panel has its own customizable toolbar Be A Anatpits deel Rieger ling Maric Pie Eat em O Ep Geh Papai Took ip Diiren H i Hia M a DRETI Winda Hg ATT Line 4a gh Uh amp ah ene AT u Sy Tee RETIRES F BODE p Ap ETJET H Ay DRAIT Be FHF D Sy PH ee rra poor cheres Gama Oe T ria De fig di EEPE ii B Ay Aripin aed Duane Dais H i Wiel 1 a ETE Tem ia 4 Ar ee et SN oa aed Cece aed Deities SDS ean ARO LPE cia ap O 2 Planes 2 Pun lires gt IE PEF si Cai the ab 5 Decuria Sette Dy Day nae aed Farpas M ri ce phi G rane ppc See Aves bred Bode Mag Papper i a nora ai Se ee Ld Figure 2 1 Main Window Left panel The left panel displays the hierarchical tree structure The hierarchical structure is a list of contents of the uploaded Microlog module data files Working in the left panel The hierarchical structure expands and contracts to show hide individual branching items e Click the or icons double click an item or use the or
153. ng Microlog Status To view the Microlog s status e Click the Handheld button An Information dialog displays the Microlog s version memory used and memory remaining battery status etc e Click OK to return to the Connection page Mobile Device Viewer Data Transfer The Data transfer window displays the progress of the upload GP Mobile Drenice Viewer 2 Pears iaai ahia poa date n hamiisired Lisisadrg Ba T a 1 ordeal O i Araka VEL S Hci Figure 3 5 Mobile Device Viewer s Data Transfer Window To cancel the upload e Click Cancel You are prompted to confirm that you wish to cancel the upload e Click Yes The Transfer stopped page displays SKF Analysis and Reporting Manager 3 5 User Manual Data Transfer Mobile Device Viewer Transfer Stopped Mobile Device Viewer Transfer Stopped The Transfer stopped page displays if an error occurs during the upload or if you click the Cancel button during the upload A summary displays the reason why the upload stopped e Click Back to start the upload process again or Close to exit the Mobile Device Viewer wizard Mobile Device Viewer Transfer Complete When all files have successfully uploaded the Transfer Complete window displays and provides a summary of the files uploaded and processed e Click Close to return to the main ARM window the data displays as a new hierarchy group i Kobdle Device Viewor Transter Complete Yor daa har basn tanrdena
154. ng in the C or D grades The special case option of None prevents any FFTs being saved under any circumstances SKF Analysis and Reporting Manager 6 11 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager i i z La r Mesnrererti Mactwe Pctire PFT Corto ace ors race fard Gece Dorcres Grade Labels Tab Specify the number of test grades i e vibration levels alarm levels for conformance testing and the label for each grade acem Alacra liros of Graces Defni Show Figure 6 14 Grade Labels Tab Number of Grades Specify how many test grades to use to rate measurement results up to eight Below this field colored bars automatically display for the specified number of test grades Colors are automatically set Test grades apply to all of the test template s measurements The Grade Boundaries tab specifies individual test grade settings vibration level setpoints Default Show Select the default view on the instrument Grades will show the grade labels by default in the results on the instrument whereas Values will cause vibration levels to be shown Grade Labels Click a colored bar to change it to a text entry field Examples of grade labels are Pass Fail Good OK Bad Poor Acceptable Good etc It is good practice to keep these labels short since they display on the instrument which has limited screen real estate SKF
155. nsee shall not assign or otherwise transfer the Software or this Agreement to anyone including any parent subsidiaries affiliated entities or third Parties or as part of the sale of any portion of its business or pursuant to any merger consolidation or reorganization without Licensor s prior written consent Any assignment or transfer effected in violation of this Section 10 shall be void ab initio and of no force or effect FORCE MAJEURE Neither party shall be in default or otherwise liable for any delay in or failure of its performance under this Agreement if such delay or failure arises by any reason beyond its reasonable control including any act of God any acts of the common enemy the elements earthquakes floods fires epidemics riots failures or delay in transportation or communications provided however that lack of funds shall not be deemed to be a reason beyond a party s reasonable control The Parties will promptly inform and consult with each other as to any of the above causes that in their judgment may or could be the cause of a delay in the performance of this Agreement NOTICES All notices under this Agreement are to be delivered by depositing the notice in the mail using registered mail return receipt requested to the party s last known principal business address or to any other address as the party may designate by providing notice The notice shall be deemed delivered four 4 days after the n
156. ntry in the Shortcut properties as follows assuming the default installation e C Program Files ARM exe C e When you run ARM a Confirm dialog asks if you want to clear all registry settings Click Yes ARM shuts down after executing this command DSP Troubleshooting 11 2 If the Class not loaded message displays when attempting to enter the Digital Signal Processing routines the ActiveX control used to carry out the DSP algorithms is not present or registered on your system Possible causes of this are e You copied the software from another location rather than using the installation routines e When the installation routine attempted to install the DSP ActiveX component this failed due to some circumstance You should reinstall the software using the supplied installation files Alternatively you can run a system utility to register the ActiveX component go to the directory where this component is located normally the program directory and run the following command ina Command DOS prompt window e regsvr32 dsp ocx In some rare cases your copy of Windows may not support ActiveX In this case download files from the Microsoft website to enable your system to support Activex SKF Analysis and Reporting Manager User Manual Troubleshooting General Troubleshooting General Troubleshooting Connection to Handheld device For successful communication of your handheld device with the ARM software you
157. nts a single measurement channel e Depending on the data you may need to amplify the range to see how the data has been transformed e Toreturm to the original data spectrum select Post Processing None from the DSP menu With two peaks you can look for spacing between the peaks or if there is a repetition of those peaks along the Cepstrum To apply a difference cursor on the plot e Right click the plot and select Cursor Difference cursor Two lines display showing the position of the cursors The value in the bottom right of the window shows the difference in amplitude between the two points e If there are two peaks you can see what the frequency relationship is between them The bottom left of the plot shows the x axis information the two positions the cursors take and the interval in seconds and frequency relationship frequency difference SKF Analysis and Reporting Manager 5 19 User Manual Digital Signal Processing DSP Toolbar e o amplify the range put the cursor over the graph and use the mouse wheel or right click the y or x axis for magnification options scale units etc or use the keyboard controls or Graph menu to customize the plot DSP Toolbar The DSP toolbar displays at the top of the ARM main window below the main menu bar RTI DSP Window Power Cepshum E Process None Copsium Fj Power Spectum KIS Quek FFT Quck L Quick waterfall Figure 5 24 DSP Toolbar This toolbar is ful
158. o display Ge File Kanaper tor Mobile Devio l T art fouas upp Hha ecko to meraga pao CTO Drip Beu and terale Hem io he mobie dram oan The ganal on Ha beft shywe tony thm Dm boaa Go yos C ani fhe parei en Ha ight hve tha Gl m you ls ee pated fiii Fies on pobe evige Cii DEasi i My Ceca Araia rs oe i Haaga dali 4 an found imn Custos Temple Ci Tour Premru Y Trax Deo Figure 6 5 File Manager Window The Local files panel shows all of the CTC set up files located in your current CTC Setup files directory You can sort each file by its name size and date by clicking on the column headers Below this list box are a number of controls that allow you to manage these files New Click to create a new set up file Edit Click to edit an existing file Both of these options utilize the Template Generator utility SKF Analysis and Reporting Manager 6 5 User Manual Check to Conformance Module Support CTC Setup Generator and File Manager ase actor Petre FFT Corna Gracie Labain Gracia Barda Gracie Souter Pesati Alacra Pitcher Lire ES aT Termii fos aig KP on Poor Figure 6 6 Template Generator Utility Delete Click to delete to the recycle bin any selected files Transfer Click to copy the selected files to the mobile device The Files on mobile device panel shows all of the CTC set up files located in the appropriate directory on your mobile device Below the list box
159. olumn displays names of any bookmarks assigned to these fields Report Gemerabor for Microsoft Word FFT from 40K PK PE Ch T A Selection of fields ond bookmarks The fist below shows af ol the avalabie taod fields that FOU Gan plese un oul document cack ona field then chota a bookmark from Ihe diag dow fet bok Dala the fasid lia Serr Le Becoed lhelde Record held Pareri nama Fecud name Fetid das Arapi pame Mumba of lines Fhia Fha vaih writs Kilep Figure 7 13 Report Generator for Microsoft Word Fields and Bookmarks To assign a bookmark to a field e Select the field from the Record fields list box e Select a bookmark from the Select bookmark drop down list The name of the selected bookmark appears next to the field name If you are running a no bookmark report values write to the document in the order that they appear in the Record fields list e Click Next The Select report items page displays if enabled on the Program Options Updates Reports dialog Otherwise the Select file output page displays SKF Analysis and Reporting Manager 7 13 User Manual Reports Word Reports Report Generator for Microsoft Word Select Report Items On the Select report items page create edit and delete the reporting items to use in the selected report Report items include amplitudes at individual signature positions or peak or RSS within user defined bands You can also configure each
160. om pour daha Figure 9 8 Updates Reports Tab Use the Program updates area to specify how often ARM checks for program updates ARM checks for updates by default every seven days Periodically check for program updates If enabled ARM checks for updates according to the specified schedule during program startup gt If anewer version of ARM has been released the details display and a link is provided to download and install the new version gt If you are prompted for a password contact your distributor for support To adjust the interval between checks e Change the value in the Check for updates every days list To check for updates at any time e Click Check now to run the check immediately Use the Reports area to enable the Select report items pages when generating a report in the Word Report Generator Expert The Select report items pages allow you to include user defined values generated from the data in your Word documents based on single or band values from your data 9 10 SKF Analysis and Reporting Manager User Manual System Preferences Program Options Show the Report Items options in Word Reporting Expert If enabled the Select report items pages are included in the Word Report Generator Expert when generating a report Default is disabled If not enabled when generating a report the Word Report Generator Expert skips the Select report items pages To enable the Select Report Items pages i
161. om the plot e Click Edit Assign bearing The Bearing selection dialog displays e Select the bearing you wish to remove from the Bearing s selected list and click Remove Calculating gE Overall Limits ARM has the ability to calculate enveloped gE overall limits and store the calculations with the data If you select an enveloped spectrum the Edit Edit date and speed option changes to the gE Alarm Calculator Record date option Selecting this option displays the gE Calculator dialog 4 72 SKF Analysis and Reporting Manager User Manual Plots Calculating gE Overall Limits aE Labculator Edi the recon datefime lor Aoselerstion gE pactum Record date Raced time gA 3203 4 37 16 PM Speed in APH 5000 Beating bose diameter mm pli Phas bgt speci LPE 160HE iniiai gE overall aet 2 12 intial gE overaldage 6 47 for Xima Help Figure 4 82 gE Calculator Dialog To calculate the gE overall limits e Select an enveloped spectrum e Click the Edit gE Alarm Calculator Record date option The gE Calculator dialog displays e Enter the speed RPM and bearing bore diameter The values automatically calculate The formula takes the speed Fmax and bearing bore diameter and gives recommended gE overall levels which show at the bottom of the dialog If setting up a condition monitoring system this gives guidance on how to set your initial overall level settings for gE points in SKF ptit
162. ompensate Licensor Consequently Licensor shall be entitled to seek and obtain in addition to such other monetary relief as may be recoverable at law or in equity such injunctive other equitable relief as may be necessary to restrain any threatened continuing or further breach by Licensee without showing or proving actual damages sustained by Licensor and without posting a bond CM F0176 Revision F January 2011 Table of Contents About Analysis and Reporting Manager Software General Window Operations Using the Main Window cccccscccsessesssesssesesesees ARM Operational OVerVieWw cccsscsssesssescseseeeees Welcome Window ccccccsssesssscscsessssssesseseseeeees Other Data COMMANAS uu ceceecscseesessseeseeeseeeeees Context M NnUS ccceccccccessscescsesssscscscscsessesseseesees Select Path for Source wu eecccccsseesessesesesseeseees IALA A BENTEN E E E A A A Data Transfer Plots Data Transfer OvervieW sessereseesreseersen Mobile Device Viewer cceccccscessscesesesssssesssseesees Mobile Device Viewer Connection Mobile Device Viewer Data Transfer cc 0 Mobile Device Viewer Transfer Stopped Mobile Device Viewer Transfer Complete Plots OVERVIEW na aA TET RER Display Style Editor cecssssseteeteseteeeesesees ZOOMIMUAG steed E AEE cele ete dtc TA PIO TYPES inaran rittaa USOT O a iii ede Ae arene Notes and Annotations ccceccccesesesesesesseneens
163. on from the Spectrum delta drop down list and specify the Delta time ms value ARM automatically calculates how many spectra to generate and the Number of spectra field automatically updates Delta RPM recommended if you have a trigger input Select the Delta RPM option from the Spectrum delta drop down list and specify the Delta RPM value ARM analyzes the trigger channel to calculate the sample zones used to generate the spectra Speed and phase information is stored with each spectrum allowing you to generate a proportional run up or coast down plot The speed range of the data displays in the information panel and on the caption bar and indicates whether it is a run up or a coast down SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window gt The X axis units field includes an Orders option for the Delta RPM allowing you to display an order normalized waterfall plot Run up 760 rem bo 30720 ren Humber of spectra 19 CALTION 17 of the 9 found speed zanas have a loal speed variston af greater than 5 the may ead to spectral meanng when processed DEP n li LTOOESS Figure 5 15 Information Parameters for DSP Processing The zones selected for the FFT samples display as numbered dotted boxes on the waveform showing how the samples distribute across the waveform and the extent of the sample that will be included in the waterfall As you adjust t
164. on the band number of lines Fmax and filter waveform If you set up a gE point you can choose to save the demodulated waveform as well Informational area The bottom portion of the left pane displays instructions or context information such as the selected range and number of samples When you move the cursor over a plot this area updates to show the functions you can perform DSP Process Click to process your data Record Displays the spectrum or waterfall produced in the lower graph panel and updates to the list of produced data Notes Add notes to the displayed data e Click OK to save the data Single Spectrum from Full Waveform To display a single spectrum from the full waveform e Select the Single spectrum option from the Please select process control e Select the FFT Window filter Rectangular Parzen Hanning Welch Hamming Flat Top or Exact Blackman Detection RMS Peak or Peak to Peak and X axis units Hz CPM or Orders values as required e Click the DSP Process button The output spectrum displays in the lower panel bwi bc uae Oth i Se a ferent TROT Hamad 0079 Aes ee fot eee Peed TEH PPT gard ae or At ning a eel hd ee Lae he bell Figure 5 4 Spectrum Display SKF Analysis and Reporting Manager 5 5 User Manual Digital Signal Processing The Digital Signal Processing Window Record Both the input and output graphs are fully functional and respond to mouse commands in
165. onfirm the bookmark was entered correctly choose Insert Bookmark and you should see your new bookmark in the list e To add further bookmarks simply repeat the above process remembering to move your insertion point each time to the correct location SKF Analysis and Reporting Manager 7 27 User Manual Reports Creation of Templates for Word Reports Setting up a Template Report in ARM Using the Report Generator for Microsoft Word window you can create any number of reports that define the template link bookmarks in the template to report elements from your data including record name reading date spectral parameters notes and graph plot and the name and location of the files created When you select a template ARM reads it and extracts the list of bookmarks it contains you can then associate any report item you wish to include in the output with whichever bookmark iS appropriate For example if your template contains a bookmark called GraphPlot that defines where you wanted the graphical plot to go you would select Graph from the report elements list and pick the GraphPlot bookmark from the bookmark list You may also add in as many report items to your report as you wish allowing you to output simple data analysis Reporting items in ARM Software text reports and Word reports can include amplitudes at individual signature positions or peak or RSS within user defined bands You can also configu
166. ons When you do this the cursor label is marked as Peak tracked SKF Analysis and Reporting Manager 4 47 User Manual Plots Cursors Spectrum CH1 map 19 Dec 1991 00 19 18 TESTE Peak tracked cursor 2 00 4 1 80 1 60 4 1 40 5 1 204 1 00 0 80 0 60 0 40 0 20 0 00 0 Frequency Hz 500 Figure 4 55 Peak Track You may also move individual cursor positions by moving the mouse over the spectrum cursor point required then dragging the mouse while holding down the Ctrl key Spectrum CH1 waterfall V 19 Dec 1991 00 19 20 TESTiPeak tracked cursor Vv 0 0418 0 0543 0 625 0 721 0 821 0 973 0 522 0 597 0 277 0 0432 i Frequency Hz 500 Figure 4 56 Individual Cursor Positions When you release the mouse the line moves to its new location e o return to normal cursor position mode simply move the cursor with the mouse or keyboard 4 48 SKF Analysis and Reporting Manager User Manual Plots Notes and Annotations Notes and Annotations Annotation Editor You can add any number of annotations to your data plots Unlike notes annotations belong to the record on which they are placed You must place annotations on the plot relative to the data which makes it necessary to bind the annotation to that data The only exception is for orbit and polar plots since the placement of annotations on these plots is relative
167. or overlap the blocks of data used to create the spectra the next time you display a Quick Waterfall For overlap enter a negative value Waterfall Spectra On the Waterfall spectra dialog specify the number of spectra to create from the waveform the next time you display a Quick Waterfall 5 20 SKF Analysis and Reporting Manager User Manual Digital Signal Processing DSP Toolbar Post Processing The Post Processing option allows you to process the selected waveform data into a Cepstrum Power Cepstrum or Power spectrum e The Cepstrum option squares the values amplitude of the original spectrum converts the values to decibels and then performs a FFT on it e The Power Cepstrum option squares the values of the Cepstrum e The Power spectrum option squares the values amplitude of the original spectrum e The None option toggles the Cepstrum power Cepstrum or power spectrum back to the original spectrum removes the post processing SKF Analysis and Reporting Manager 5 21 User Manual 6 Check to Conformance Module Support Check to Conformance CTC data originates from the Check to Conformance module in the Microlog and is used to assess machinery health in accordance with industrial standards ISO BS API etc or user defined standards Vibration levels automatically compare with predefined limits and a pass or fail indication display The results are stored ina Check to Conformance results file You can up
168. ors repeat for maps with more than six spectra gt Disabling this option is useful if you want to distinguish more lines in an overlay plot by different colors for example if evaluating more than one spectrum Color code labels When enabled the backgrounds for the cursor value and date labels are drawn using the same colors as used to fill their respective spectral areas set in Waterfall style area Draw walls When enabled the waterfall floor left wall and back walls are drawn If disabled there are no wall or grid lines and the waterfall background colors are not used Draw end labels When enabled the z axis notation is written to the right of each spectral plot Draw cursor labels When enabled the cursor value labels display the cursor position label always displays Draw analysis label Show record name and Draw record date time When enabled these labels are drawn at the top of the plot Note that the program checks the available space and only outputs those that fit If the labels do not display increase the window s size or reduce the font s size Show band power line name When enabled a line representing the band power level is drawn on the left wall of a waterfall when using a power cursor Show values on line When enabled the peak in band or band power cursor values are drawn alongside the band power line or peak cursor line on the plot Proportional Z Axis When enabled spectra is proportionall
169. ot affect formatting SKF Analysis and Reporting Manager 4 53 Plots Global Editing Global Editing Global Editing Overview A global edit is a change that applies to all of the records in the selected data structure including applying selected settings to every plot in every record and applying notes to all possible display types and individual plots within each record Some edits do not apply to all data types for instance choosing a frequency axis notation of CPM does not affect time domain readings no damage can be done in these cases since the settings are stored but ignored To apply a global edit e Select the root node of the data structure and then choose from the Graph menu s various options e Before ARM applies the edit confirm that you wish to proceed with the operation Global Editing Expert Wizard The Global editing expert wizard guides you through the process of selecting and applying a global edit to the selected data structure The specified parameters apply to all records in this data structure If a parameter does not apply to a particular record the edit has no affect on that record lobal editing expert Preceeed eecords from Demo DATA crested on FO A x Global Editing Expert Global eing ol Phocecesd records bhan Dermo DATA cited on 3 Walor fo the Globel Etdirsg E sps Th caog wl hake pou through the sapei mataatahi bo aapki a ninge global editing opari bp fhe piee dss Sruchae Orthe ned
170. otice s deposit in the mail if such notice has been sent by registered mail 13 14 15 CHOICE OF LAW This Agreement including all Exhibits including its formation execution interpretation and performance and the rights and obligations of the Parties hereunder shall be governed by and construed in accordance with the laws of the Commonwealth of Pennsylvania without regard to any conflicts of law or choice of law principles thereof CONSENT TO JURISDICTION In the event that either party initiates litigation relating to or arising out of this Agreement Licensor and Licensee irrevocably submit to the exclusive jurisdiction of the state or federal court in or for Philadelphia Pennsylvania for the purposes of any suit action or other proceeding relating to arising out of this Agreement or any transaction contemplated hereby or thereby Legal Proceedings Licensee further agree that service of any process summons notice or document by U S registered mail to such Party s respective address shall be effective service of process for any Legal Proceeding Licensor and Licensee irrevocably and unconditionally waive any objection to personal jurisdiction and or the laying of venue of any Legal Proceeding in the state or federal court in or for Philadelphia Pennsylvania and hereby further irrevocably and unconditionally agree not to plead argue or claim in any such court that any Legal Proceeding brought
171. per spectrum in the CTC You can output CTC results using the Word Reporting function in the software and include the table machine graph and multiple data plot as required SKF Analysis and Reporting Manager 6 3 User Manual Check to Conformance Module Support Check to Conformance Results Files Report Generator for Microsoft Word CTC Demo Data Check lo conformance resulls For Check to torfomance results lies vou ma output a lable cortaring the check result and optionally reide the machine graphic Choose the book maths required hat thasa hwo helds Teble CTCTabls i Machine i You cen aude the mulpe gaph plot of the CTE spectral maig Gee Cl Skip ttardand repot ilens Figure 6 4 Word Reporting Function Reference the Report Generator for Microsoft Word section for more details about generating SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support CTC Setup Generator and File Manager CTC Setup Generator and File Manager ARM s File Manager window allows you to manage CTC set up files used for gathering CTC data You can create and edit these files using a Template Generator utility that is bundled with ARM To view the File Manager window e Click Tools and choose CTC File Manager The File Manager window lists all of the CTC set up files located in your local data directory If a suitable mobile device is attached to your computer its CTC set up files als
172. port item being edited to display information based on a band across the signature Report Gemerabor for Microsoft Word FFT from 40K PK PR Ch Y A R Signature band report item Pees telect he Rene pou with to prida in the bard bem reper Bandlower 1 Pick from graph Band upper 7 edict hom bo repul on ihe band data i Peak vaka Band power FS5 Conligursion of the report ten E Lower abecieza value Ge Upper abeciees vale C Show the middie or pask band abscissa value Display scale Linear ae Figure 7 16 Signature Band Report Item Page e Enter the time or frequency values into the Band lower and Band upper text boxes or click the Pick from graph button to choose the values from the graph e Determine whether the report item reports on the peak amplitude found in the band or the band RSS Peak value Select to report on the peak amplitude of the signature within the band Band power RSS Select to report on the band RSS power e Include band start center and end positions in the report item by enabling the following Lower abscissa value Upper abscissa value Show the middle or peak band abscissa value e Click Next You return to the Select report items page 7 16 SKF Analysis and Reporting Manager User Manual Reports Word Reports Report Generator for Microsoft Word Single Signature Value Report Item On the Single signature value report item page specify how to use the report item being e
173. ptions To configure a toolbar e Select the View menu s Toolbars submenu or right click any toolbar The Toolbars menu displays e Enable or disable any toolbar by clicking a toolbar A checkmark displays next to enabled toolbars e Click the Configure Toolbar option to add or remove items from a toolbar The Toolbar set up dialog displays Remove and Default appear on the pop up menu over any toolbar If you have right clicked on an existing button or separator the Remove command is enabled allowing you to remove this command from the toolbar The Default command returns the toolbar to its original setting To complete the operation close the Toolbar set up window SKF Analysis and Reporting Manager 9 13 User Manual System Preferences Custom Toolbars Toolbar Set Up The Toolbar set up dialog allows you to place command buttons on any visible program toolbar All available commands are listed on this window arranged into categories for your convenience Each category includes a Separator command that can be used to place a vertical separator line between buttons Toolbar set up Sdecl a celegany Description y ddio TCh Addihe curently selected check to confomance resuls Oper up a dawnload rrgaor lo Were data hiom a Dia Clone the cuiet selected data source Choe the windows Close all dala stiches Import ot erpe tour of offfour dala from a D1 1 100 o Dl Data summary Outputs full listing of
174. r User Manual Digital Signal Processing The Digital Signal Processing Window The Digital Signal Processing Window This Digital Signal Processing window allows you to post process time waveform data using FFT routines This window allows you to process your time series waveform data in one of four ways 1 2 3 A single spectrum created from the entire waveform A single spectrum created from a portion between cursors of the waveform A waterfall plot created from processing successive segments of the waveform into spectra This can be averaged into a single spectrum or for readings containing a second channel with trigger information the waterfall may be processed using speed control An enveloped spectrum gE spectrum from an input signal The gE spectrum takes high frequency data and band pass filters it demodulates and rectifies it and then breaks it down into a spectrum gt The input signal s sampling rate must be 40 000 Hz to allow for enveloping analysis You may also choose from a selection of FFT window filters including Hanning and Hamming ee ea Tre replete Fae a Tima Darmin ott g aT PRE i LED E amw Cua Bi dki far oe a Cosa ey Eee Copa a awapa BELGE Figure 5 3 FFT Window SKF Analysis and Reporting Manager 5 3 User Manual Digital Signal Processing The Digital Signal Processing Window Fields include Please select process Single spectrum Uses th
175. r button to select a different color Waterfall band color fade Specify a percentage color fade to apply to the bounding zone drawn on the plot Reset to default Click to reset all styles to default SKF Analysis and Reporting Manager User Manual Plots Display Style Editor Display Style Editor Signature Tab The Signature tab defines the style used to draw single signature plots Ula shy he ecihor Gorvertal Signature aisea Specteogiam Wbt Other Trace syke Backgiound Lins a Clear Colour filed O Coloued O Colour filled fries Ophans e Draw borders F Dras anahisi laba Duti tle E Lie above CO Full line e Show second name KA Toes hier e Drew ecard deteime C Diamend E Show overal level CY Circle F Show spechum FSS C Y Square o Thek arene ire TA gk j Cancel 7 Her Figure 4 12 Display Style Editor Signature Tab Fields include Trace style area Line No color fill is added below the line Color filled Fills the area below the line with a specific color Spectral fill on the General colors list Color filled clear Fills the area below the line with the same color as the general graph area Background area Clear Plots use the same background color as the general graph area Colored Plots use a separate color plot background on the general colors list Cursor style area Line above Cursor line is vertical starting just above the trace
176. ral eaa Orders Tou may Ghocom balasan He CPM ckit pet rade and orders Kode frat dl the cate was nology casad Eg orders vo val harem bo acip an onder bacior pariak iing Pa Dede Lschor onion wade the Graph Sands mami Figure 4 65 Global Editing Expert X axis Units Page The following parameters are available Hz Change the x axis units to Hz CPM Change the x axis units to CPM cycles per minute Orders Change the x axis units to Orders gt If the data was not originally captured using orders a default order factor is applied which is equal to 1 Hz 1 order To set the order factor for individual records select the Graph menu s X axis Order factor option These settings apply only to frequency domain data and are ignored in any time domain or notated x axis records e Select the x axis units e Click Next The Confirm page displays 4 56 SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert High Pass Filter The High pass filter page applies a high pass filter to all records in the selected data structure Change the value used or clear the current filter lobe editing expert Demo TATA High pass filter Select the hagh cercr Hiker paing maei Filter starts Het 1 Apply Fite Appi b riiui Pigiai lew TP We ib piid if HE and hag the effect of reg Ihe walues of arp mecra les eerie ieaanc eae al a ia ihan ihe high pass hie vais Chia
177. range e Press and hold the Ctrl key and hover the mouse cursor over one of the start end points The cursor changes to a left right arrow Time Domain CH1 g 40K PK PK Chl Y Axis S 1W2013 4 37 16 PH ra t 60 t 20 0 20 aaan l PA A AA HINN 0 09 La g 0 40 f 0 89 1 20 1 60 kaad 2 00 dian 7 s TY T T T T T T T T 0 000 0 640 Cursor 0 224443 Tere s Vah 0 0099 g Figure 5 8 Adjust the Source Data Range SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window t 50 1 20 0 30 0 40 0 00 0 40 0 89 1 20 1 60 2 00 qm Time Domain CH1 g 40K PK PK Chl Y Axis 2 00 VE Ath Ahh Hi T a Te a T T Time s 0 000 Cursor 0 0744434 S LV2013 4 37 16 PH 0 640 V alye 1 21 g Figure 5 9 Start End Points to the Desired Location e Click and drag the start end points to the desired location The number of lines selected for the FFT update in the Samples field in the left panel and the data updates in the informational area Please select process Sinde spectrum Multiple Waterfall Use samples between cursors s2 w fi Samples C Pan signa C Averaging FFT Vindow Hanning Detection RMS X axis units Hz Spectrum celta Number of spectra Offset Spang overlap J Enveloping analysis gE Figure 5 10 Left Panel W
178. re each item to include the ordinate value time or frequency Finally you can choose the document naming to use you can choose either the record name a GUID or use a custom name to which is added a number to keep each file unique gt AGUID is a128 bit Globally Unique Identifier When created by your computer system this value will be unique GUIDs are numerical but are usually shown in the following form 0F447726 A5E1 4340 AAD7 3DEC78B2CCBD You can also choose which directory to write the files into this is specific per report allowing you to direct output to different places Once complete click on the Next button to run the report A progress bar shows you feedback and once completed if there were no errors you can choose to view your documents in Word Predefined reports may be run directly using the Default Word report command which when placed on a toolbar will include a drop down list allowing you to run any report directly SKF Analysis and Reporting Manages Fle Edit Wew DSP Export Graph Disig Tools Hel a Demo DATA ED 2 Plane 3 Run Balice o z he i Word Report Generator Expert g mm Defa At Word report k 1 No template report Delete Word report 2 Sampe report singe piot t Orbit demo 3 Twelve plots X ARM Text Reporting Expert weve pots GS Processed records hom AAM cre 4 Single plot landscape z Defaut text report e CTC Tend Processed data ss R Five plots
179. requency domain When you select this option you must specify Hz CPM or Orders in the Frequency axis units drop down list Notated x axis data Choose this option when the x axis values are not spaced evenly along the x axis for example when importing octave analysis data When you select this option you must specify the x axis units in the x axis units text box As you change these settings ARM automatically analyzes the import data to see if it fits and displays the results in the status panel at the bottom of the page e Click Next The Trace Process page displays SKF Analysis and Reporting Manager User Manual Import Export ASCII and Excel Import Wizard Import from File Wizard Trace Process Page On the Trace Process page specify an optional trace process for the data When you choose the X axis parameters ARM automatically selects the most suitable trace process for you l impot from file 40 Pe Pals OU Gan opea a nace bete for thas cide Ehia a t rardi Bree ot Buck Programe sal peec one based on pour other senlior please conte heas be a linpi Shel Ehabi raroi bes ol bhes pares m ap bape mi qeekereed or bhe prama pae Cippi care patiri bn al iar Teper Terese F urtar W rd Fi Figure 8 5 Import from File Wizard Trace Process Page To select a different trace process e Select a trace parameter from the Trace process drop down list Options include Spectrum CH1
180. retude Figure 2 5 Summary Window Select Path for Source The Select path dialog displays when you are loading source data files into ARM by selection of Open a source directory from the File menu whe and Benortne Marape E rie cen Mi kena dyin fe cmo aeni Fe type G E crente mateta piat Warne CH Depta OTE tena E o oe ey Pies Re apen POUR Anpyoer CSN fies Al save celes dial 5 eect Tava s Criel wi Ecel workbas T ay Pes com al DATA created on 29 Map I Figure 2 6 Open a Source Directory 2 6 SKF Analysis and Reporting Manager User Manual General Window Operations Select Path for Source ee Jei ES Tost Canto Had Ditea F Se Techpubst on Will 20 jE ie SK pS or WATT SAF JH H e Rerorvable Dak f BSE Common on e021 Ej Se Drass i vbhla Mosk ish Figure 2 7 Select Path Dialog To select the path e Select a folder from the Folders list e Click OK Difference between Source and Stream Upon opening a data file or source directory ARM performs checks to see if the file requires updating by comparing the data in the source files and the associated data stream file This comparison is based on the number of records and a comparison of the record names and their storage date times If ARM finds a difference the Difference between source and stream dialog displays Specify how ARM should proceed Dilference between soim ce and stream There 5 dats
181. rted a directory enable the Import all to a single branch checkbox to add the data in each file to a single record allowing you to display all the spectra on one plot SKF Analysis and Reporting Manager User Manual Import Export ASCII and Excel Import Wizard Import from File Wizard General Page On the General page specify how the fields will display and how the data is separated a ee xls oo PA Tarse F rate Riis ST Daas fowl Hei 3 Tor valea ne CU vee a ict ae C Hap iat D Huiipks pears Gabon Og ipp care psh biy al les Xim Fee Figure 8 1 Import from File Wizard General Page General format area e Select the format for how the fields will display Fields include X Y values Data is arranged in two or three columns displaying the X values first followed by one or two columns of amplitude values Y X values Data is arranged in two or three columns displaying one or two columns of amplitude values first followed by the X values Map Data is arranged in three or more columns displaying the X values first followed by any number of columns of amplitude values Multiple pairs Data is arranged in sets of two or three columns displaying each set containing the X values first followed by one or two columns of amplitude values Delimiter area e Select the type of delimiter used to separate the data Fields include Tab Comma Colon Semi colon Space or Other If you sel
182. rting Expert Repara on FFT Irom 40K FEFE Chi T A Welcome to the epot Ganenshor for Microgolt ord Tha disog wll take pou Brough tre sepa necessary to crest one o more Word documents containing infomelion extracted liom pour selected dala On the newt page ou efl be thov a bel of Whore teapots already patup pec may chops one fom Ihs leh ioe peaa anae one Tou Gan then go on bo modi Ihis ipat fquiced before geneity pour documents All reconds within the source data all be smabsedand a separate Wod document created for mach lick on the Mat button to go bo the report selector page Tou can cick on the Hen and Back buttons ot ay ling lo review on Change yout tainge Figure 7 9 Report Generator for Microsoft Word Wizard e Click Next The Select report page displays SKF Analysis and Reporting Manager 7 9 User Manual Reports Word Reports Report Generator for Microsoft Word Report Selection On the Select report page a list of available Word reports display to apply to all records within the source data Report Gemerabor for Microsoft Worda FFT from 404K PR PE CHT T A EJ Select report The folowang ist shows all of Ihe repocts cumenti defiresd in you setup choose a report to edk or click on ihe Mew button bo mesile a ree report Bepon yet Peo terngfahe ragai ie Semele report single plot ted T waive plate a Single plot landscape fad Two plane balance papell k F a me reli
183. s are created at the second level By then running the report against the root of the data structure you will obtain two documents containing the individual plots Note that at present Balance reports are not translated so all terms output to the document will be in English For Balance and Overall data it is possible to generate a table in the Word document that is exactly the same as that shown in ARM To do so you should assign a bookmark in your template to the Table report item Note the following formatting guidelines e If you place the bookmark in a table in your template the table row containing the bookmark must have the same number of cells columns as the table to be produced e f you place the bookmark in free text outside a table in your template ARM will create the table with the correct number of columns and rows In this case your template default formatting applies to the table e f you wish to apply formatting to the table to be produced you should create and format the table in your template ensuring that it has enough columns For Balance data if you do not want to reproduce the entire table but are only interested in some fields you can use specific report items to attach parts of the table to bookmarks Note the following SKF Analysis and Reporting Manager User Manual Reports Word Reports e The report items are named after the identifiers in your balance data for example IR for Ini
184. s the annotation on the plot SKF Analysis and Reporting Manager 4 49 User Manual Plots Notes and Annotations Se E De ee tom perg sing Ghee Hey 9388 2 0 en ead Debaran CH wie p rii Figure 4 58 Annotation Plot To relocate an annotation e Click the annotation and drag it to the desired location gt As annotations are placed relative to the data when you magnify or zoom the plot the annotation will move with the data To edit an annotation e Double click an existing annotation to display the Annotation editor and make the necessary changes To delete an annotation e Click and drag the annotation off the plot The cursor changes to an X e Release the annotation A message displays prompting you to confirm the deletion Confirm Y Are you sure you wart bo delete this annotation Figure 4 59 Confirm Dialog You can also create edit and delete annotations using the Graph Annotations menu options If you choose to edit or delete an annotation when there is more than one annotation on the plot a Select annotation window displays 4 50 SKF Analysis and Reporting Manager User Manual Plots Notes and Annotations i Select annotation from FET From Channel 1 ia T Hmi Hane Jummap Ti ranning peed Located ai F Heard 4 7 gm ire Te HF data Located af 207 Hz amd 22 4 am rre Figure 4 60 Select Annotation Window Enter Notes The Enter notes dialog al
185. s to these limits Change plot type Select the plot type to display Orbit polar and Nyquist options Select an orbit plot type to display specify the x channel probe angle and swap the axes on orbit plots Annotations Create edit or delete annotations Control all When displaying multiple plots Control all allows you to toggle between controlling records individually or together Full window Select to expand the graph to occupy the full ARM main window hiding the left panel Display styles Opens the Display style editor Multiple plot waterfall ranges Opens the Choose records to include dialog For multiple plots including waterfalls choose or omit any records from the display Waterfall options Displays options for changing waterfall or overlay plots Reverse waterfall Reverses the order that the records are drawn moving the back record to the front and the front to the back etc Change Z Axis Information Choose the z axis information used to display waterfalls some modules such as Run up Coast down return a number of z axis parameters such as speed or time If the waterfall is plotted proportionally the spacing changes by changing this setting Waterfall blanking Specify a percentage blanking value to apply to your spectral data allowing you to hide low level information to clarify the plot Remove DC offset For time domain data ARM removes the DC offset from the data the average valu
186. sa value checkbox to include the X value in the report e Select a display scale type from the Display scale drop down list to direct the output into a standard display unit e Inthe Show harmonics selection box specify the number of harmonics of the selected position to include in the report e Click Next You return to the Select report items page SKF Analysis and Reporting Manager 7 7 User Manual Reports Reporting Expert Reporting Expert Signature Band Report Item On the Signature band report item page specify how to use the report item being edited to display information based on a band across the signature Reporting expert Processed records from ARM created om 30 May 2 EJ Signature band report tem Please select the keme pou vash lo mchde in lhe bard bam report Bard kwer 4000 Fick fram gph Band upper 000 Select how ho report om the band datar oF Peak value CJ Bend power A55 Conliguiaion of the panel lem Lower abaissa vats F Upper aseissa walne L Show the middle or peak band abscissa value Display eal Linea LX chee F Her Figure 7 8 Signature Band Report Item Page e Enter the time or frequency values into the Band lower and Band upper text boxes or click Pick from graph to open a simple graph window and select the position using the band power cursor function e Determine whether the report item reports on the peak amplitude found in the band or the band RSS
187. se allowing you to overlay any number of bearings on a frequency domain plot Each bearing is factored to a user defined machine running speed and displays its four defect frequencies on the plot The four defect frequencies are cage defect ball defect outer race defect and inner race defect To assign bearing overlays to a frequency domain plot e With a frequency domain plot displayed click Edit Assign Bearing The Bearing selection dialog displays allowing you to import bearings from the bearing database select bearings to overlay on the plot define the machine s running speed and view bearing summaries Bearing Selection Dialog gt You must first import bearings from a bearing database before you can add them to the Bearings selected list Reference the Se ect a Bearing Dialog section for details Use the Bearing selection dialog to select one or more rolling element bearings to display on a frequency domain plot Each bearing s four defect frequencies are factored with a user defined machine running speed and displayed on the plot To access the Bearing selection dialog e Open a frequency domain plot e Select Edit Assign Bearing The Bearing selection dialog displays SKF Analysis and Reporting Manager User Manual Plots Rolling Element Bearing Database fe Bearing selection for Position 1 Horisontal SKF 3305 ANGULAR CONTACT SEP S ANGULAR CONTACT Remove Views defect harmonies Caga defect i
188. sed writes to an individual file using the record name stored in the analyzer gt As ARM replaces tra trb extensions with a uff or other extension when a record containing two or more traces is processed the second trace is appended to the end of the file containing the first trace Individual files using a name based on the reference information Each record processed writes to an individual file using one of the following formats XaaaYbbb Where X is the reference direction code aaa is the reference direction number Y is the response direction code and bbb is the response direction number SKF Analysis and Reporting Manager User Manual Import Export UFF Options N_XaaYbb Where N is any alphanumeric character X is the reference direction code aa is the reference direction number Y is the response direction code and bb is the response direction number The reference and response codes and numbers come from the UFF header for each record the alphanumeric character for Format 2 is specified here Write all records to a single file Each record processed is writes into a single UFF file At processing time you can select the file name and location Use custom extension for UFF When enabled specify a file extension to use for reading and writing UFF files the default is uff ICATS Tab On the ICATS tab specify options for using Transfer Function files for use with ICATS Modal Analysis softw
189. see agrees that the limitations of liability and disclaimers of warranty set forth in this Agreement will apply regardless of whether Licensor has tendered delivery of the Software or Licensee has accepted the Software Licensee acknowledges that Licensor has set its prices and entered into this Agreement in reliance on the disclaimers of warranty and the limitations and exclusions of liability set forth in this Agreement and that the same form an essential basis of the bargain between the Parties 9 TERM AND TERMINATION a Term This Agreement shall commence on the Effective Date and shall continue in existence until it is terminated in accordance with Section 9 b below b Termination Licensor may terminate this Agreement and the license conveyed hereunder in the event that Licensee breaches any provision term condition or limitation set forth in this Agreement including but not limited to the license restrictions set forth in Section 2 d of this Agreement c Effect of Termination Within ten 10 days after termination of this Agreement and the license granted hereunder Licensee shall return to Licensor at Licensee s expense the Software and all copies thereof and deliver to Licensor a certification in 10 11 12 writing signed by an officer of Licensee that all copies of the Software have been returned to Licensor and that Licensee has discontinued its use of the Software ASSIGNMENT Lice
190. set gt If the plots are similar in all but the data type amplitude units Control all affects everything except the vertical scale magnification settings Full Window Display On the main window you can temporarily hide the left panel so the graph plot occupies the full window To temporarily hide the left panel and only display the graph e Enable the Full window option on the Graph menu or press F11 When in full window view most commands are still available although the cursor keys only operate on the graph even if the Send key presses to the graph plot setting is enabled on the Program options dialog e To revert to the normal display disable the Full window option SKF Analysis and Reporting Manager User Manual Plots Display Style Editor Display Style Editor Display Style Editor Overview The Display style editor allows you to modify the current plot s colors fonts cursor styles and more Urplay stybe editor General Signatute Wieda Spectogiam Obi Other 1 Defa drew sipia Jerdans E pt Ei joni Label fort Jerdens amp pt Ayeailsole colours Giaph beckgeound Flat backgroud Gnd Mahafali back wal Mahuta left ral Y aberta hom taz Waadal band coox lada ie 35 B Z ae cn Hep Figure 4 10 Display Style Editor To open the Display Style Editor e Right click the current plot and select Edit display style or select the Graph menu s Display styles option
191. settings for each graph type under the record therefore the notes are applied several times for each record To apply a note e Enter the note you wish to display on the plot in the Type in or paste the notes required text box e Enable the Show notes checkbox If disabled the note is temporarily hidden e Click the Add Field button to display the Insert a field dialog from which you can select a field code to insert in the Type in or paste the notes required text box 4 64 SKF Analysis and Reporting Manager User Manual Plots Global Editing SKF Analysis and Reporting Manager User Manual insert a Heid Posen choosa a hebi Inon Pre kt Haei dates Riascond datestnee vath boira Aeoord name Piocess name Bandai fHz Record length Spechum ASS Peak wakia Postion of prak valus ollset Aundi Ejeld code Figure 4 74 Insert a Field Dialog Click the Load from file button to display the Select text file dialog from which you can select an ASCIl text file The text from this file inserts into the Type in or paste the notes required text box and replaces all existing text Click Next The Confirm page displays Plots Global Editing Global Editing Expert Record Date Time The Record date time page specifies the date and time value stored for every plot within the currently selected data structure lobe editing expert Demo TATA Record datetime Enter or echt the dse vake bo sappy bo all asom
192. shut down SKF Analysis and Reporting Manager 9 7 User Manual System Preferences Program Options Automatically save changes in data streams If enabled ARM automatically saves changes to data stream files on exit Include source data in data stream file If enabled ARM saves the original source data in the data stream file which allows output and reprocessing of any data from the original source gt Using this option increases the file size Include WAV source data in data stream file If enabled ARM saves the original WAV file source data in the data stream file which allows output and reprocessing of any data from the original source gt Using this option increases the file size and is not recommended for larger files Save hex file after download If enabled allows you to store the raw hex data in a separate hex data file This file can be read by all versions of ARM and can be used as an archive of your instrument s contents Source Tab Use the Source tab to specify how ARM behaves when opening source data Program options Decius Fie ophons Setup Updates Repais het Genel Fomsting Sang Daa sieas TAE When opang counce Mar Compares to daba riasam ji avaible when opening F the piata i Miwani do Ge bolle 2 Ache you sourde k ihe ad ae for acia D Uedate any rer or changed records into the shear 2 ignore dillarenoes and conius to load source lignans pounce and load dats sheen
193. splays 7 18 SKF Analysis and Reporting Manager User Manual Reports Word Reports Report Generator for Microsoft Word Reporting Complete A summary of the files created from your Word report displays Report Gemerabor for Microsoft Words FFT from 40K PR PE Ch T A Reporting complete Output ol records wang od Sulomation nepant Mo femplebe report on date structure FFT fom 40k PK FE CHI Aan completed Number of radar 1 FFT trom 408 FE PE Ohi Ads tion Number of file creahect 7 All file output toc CDiocumerts and Settings kigi Desktop Figure 7 19 Reporting Complete Page Balancer Reports Balancer reports can include some extra data that you enter yourself using the Balancer Report Information dialog This includes some information not stored in the Balancer file such as operator name and correction weight information Balance Report Information Figure 7 20 Balancer Report Information Dialog SKF Analysis and Reporting Manager 7 19 User Manual Reports Word Reports To open the Balancer Report Information dialog e Select the Edit menu s Enter Balancer report data option The following items are entered on this form and stored with the data structure Bookmark identifier in Field Notes report Operator Taken from user login initially Operator Name Date Date and time of Balancer note that only Riga te the date part is used in the document Correction Ma
194. ss Mass of the correction weight CorrectionWeight1 5 Angle Angle position of the correction weight CorrectionWeightAngle1 5 To generate Word documents from your Balancer reports Select the Reports menu s Word Report Generator Expert The Report Generator for Microsoft Word wizard launches and guides you through the steps necessary to create the reports As with the text reports define as many reports as you like and run them directly using the Reports menu s Default Word Report and Select Word Report options you may also delete reports from there Balancer Reports Special Rules Special rules govern how Balancer report files export to Microsoft Word reports Balancer report files contain two columns of text information The first column includes the name of the parameter and the second column contains the value this is either text a two part enumerated type e g 0 RMS or a magnitude and phase pair e g 2 31 360 When exported by ARM into a Word document the name and timestamp of the original source file may be included You can only export one Balancer report to one Word document The Balancer report can provide any output items from the Balancer file to the Word document As with other Word reports inclusion of any of these elements is optional For Balancer reports using a Word template you should use bookmark properties for those output items required none of the standard report elements
195. t of the measurement records available for reporting Select the measurement record for which you wish to print a report Print formats Displays a drop down list of the available Word report templates currently defined in ARM Select a template to apply to the printed report Select All Click to select all of the measurement records in the Available Measurements list Unselect All Click to deselect any currently selected measurement records in the Available Measurements list Show print dialog When enabled a standard print setup dialog displays when you click Print allowing you to configure printing options If disabled when you click Print the default printer settings are used to print the report e Click Print to print the report e Click Cancel to the cancel the report and return to Windows Explorer SKF Analysis and Reporting Manager 7 23 User Manual Reports Creation of Templates for Word Reports Creation of Templates for Word Reports Introduction You can output data from ARM to Microsoft Word documents using template files and bookmarks to produce documents formatted however you wish You design your document in Word and save it as a template file with bookmarks located where you want the text or graphics to go then link these to a Word report in ARM If you want to output more than one record to a single document you will need to use a special numbering convention in order for this to work ARM
196. t the options you wish to include in the graphic 6 2 SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support Check to Conformance Results Files s i et Ver tae ee Se a r Se oth ff oma bette ea kama A JA as uk aa iF aii IR aren ee oe peer ne eed See ee oe Cae De a A L co Figure 6 3 Options for the Graphic Display Since all data the CTC results and the individual spectral recordings is bound together in the data stream file this file may be used as a permanent record of each measurement CTC Word Reports Special Rules Special rules govern how CTC results are output to Microsoft Word reports CTC reports contain the CTC report and a set of spectral readings The CTC report provides three output items to the document the results table the machine graphic and the multiple plot of the CSV results Alternatively you can ignore the CTC results and simply output the individual spectral records like a standard report For CTC reports using a Word template three bookmark properties are available for the three output items In addition the standard report template items can be selected but only operate on the first record taken including its graph plot For non template reports the three CTC items are output to a plain table and two stand alone images If you select any standard report elements they are output to the single document in sequence at the end one
197. ter one character after the dot to leave room for ARM to add the two character number to the extension e g w02 Specify various options regarding creation and naming of UFF files created from analyzer records on the UFF Options dialog 9 12 SKF Analysis and Reporting Manager User Manual System Preferences Custom Toolbars The following fields allow you to specify where ARM stores your setup files for graphical display styles and reporting All users application data The files are stored in the Application data directory for all users Note that this is a hidden folder in Windows as it is accessible by all users this allows sharing of program setup across different logins Program data directory The files are stored in the main ARM data directory My documents The files are stored in your default documents path Other The files are stored in a specified directory Custom Toolbars Configuring Program Toolbars The ARM main window has six separately configurable toolbars You may choose to display any all or none of them The main toolbar runs the full width of the main window and is located immediately below the main menu bar The left panel outline has a toolbar and each of the three views available on the right panel contents list view and graph pages have their own toolbars A DSP toolbar runs along the top of the main window and contains commands for accessing the Digital Signal Processing o
198. the format in which the data is read however you can always select different output scales when viewing the data e Enter the units used for the vertical axis values in the Units text box As you change these settings ARM automatically analyzes the import data to see if it fits and displays the results in the status panel at the bottom of the page e Click Next The X Axis Page displays SKF Analysis and Reporting Manager 8 5 User Manual Import Export ASCII and Excel Import Wizard Import from File Wizard X Axis Page On the X axis page specify the format of the x axis values 2 ieoort from file 40m PR FR als nfOD 1 TRA Turre F irice ike E ese p Sa eS D tar eee LIEN ne D1 HE IEE ionii i t ti Sa DT Die ie ote es es bE eer LEETE EA DETA iT Number gf inga breg mapenes 1500 Ling these panieka 0 akot the mame hodiegie units and noses ot your debe lt Back re 5 Plein cherdet ther g cen data ype LF iro J Ti Frequency Jom dats w Clipp ceme sthr tn al lar Pinaie chodee he fiquency ar ania Hz J N Cancel Fi Figure 8 4 Import from File Wizard X Axis Page e Select the X axis data type from the Please choose the x axis data type drop down list Options include Time domain data The data values represent a time domain signature You must specify the amplitude format as Amplitude only values Frequency domain data The data values represent data in the f
199. third party or use the Software to promote pornography hatred or racism Copies Licensee solely to enable it to use the Software may make one archival copy of the Software s computer program provided that the f g copy shall include Licensor s copyright and any other proprietary notices The Software delivered by Licensor to Licensee and the archival copy shall be stored at Licensee s principal business office If you purchased a network license of the Software you may install one additional copy of the Software on your network for the limited purpose of testing the Software s operation Except for the limited reproduction rights set forth in this paragraph Licensee shall have no other right to copy in whole or in part the Software Any copy of the Software made by Licensee is the exclusive property of Licensor Modifications Licensee agrees that only Licensor shall have the right to alter maintain enhance or otherwise modify the Software Protection of Software Licensee agrees that it will take action by instruction written agreement or otherwise as appropriate with any person permitted access to the Software to enable Licensee to comply with its obligations hereunder Licensee shall maintain records of the number and location of all copies of Software Licensee shall not provide permit access to or use of or otherwise make available any Software in any form without Licensor s prior wr
200. this directory initially taken from the name under which you stored your CTC results which you can choose and files may be moved out of this directory and back to the main data directory if no longer needed for the trend To begin constructing a trend e Open one of the CTC results sets you wish to use it doesn t matter in what order you add these files e Select the Add to CTC Trend option from the File menu The Save to CTC trend directory window displays allowing you select the destination and edit any existing trend folders Save to CTE trend directory CTC Dema Data Please choose the directory into which you vesh to store ths Check to conformance results Bett CTC Dema Data EE Root path C Doumenis and Eettinga trasarety Documents Anayasa and Reporting Manager datat The selected path sists but does mot contain any data les X coa Figure 6 18 Save to CTC Trend Directory Window Once there are two or more suitable results sets in the trend directory ARM will construct and display the CTC trend e Repeat the steps above to add any other results sets to the trend gt As you add each result set ARM compares the CTC set up in the new file to that used in the trend and will not add the new file if the setup is not the same When trends are constructed they are automatically stored in a data stream file using the name of the trend directory but including CTC Trend in the name to help identification A
201. tial Run TWA for Trial Weight added to Plane A e The balance report items utilize bookmark numbering in fact numbering is mandatory Use 1 for the first item for example for CW1 your bookmark name should end with a 1 e There are separate report items for each plane and for the value pairs to create vibration amplitude and phase for the measurement runs weight and angle for the weights Each will require a separate bookmark The report items are named to identify which is which For example for TWA phase value the report item is called TWA phase e The template can omit the numbered bookmarks for those items you do not require For example if you only want the first and fourth check run vibration measurements you need to create two bookmarks If the first is named CRAMag1 you need to name the other CRAMag4 and associate one of these with the CRA _ Mag report item Direct Print gt Not applicable with 64 bit operating systems The ARMDirectPrint Windows Explorer Shell Extension allows you to directly print a report from a pds file in Windows Explorer without launching ARM To directly print a report from a pds file in Windows Explorer e Select a pds file in Windows Explorer and right click e From the pds file s right click menu click Print A print dialog displays allowing you to specify your report printing options for one or more measurement records Fields include Available measurements A lis
202. timeshare or lend the Software to any Person v sublicense assign or transfer the Software or this license for the Software to any Person vi reproduce distribute or publicly display the Software vii make the Software accessible to any Person by any means including posting on a web site or through other distribution mechanisms over the Internet viii reverse assemble e disassemble reverse engineer reverse compile decompile or otherwise translate the Software or prepare Derivative Works based on the Software ix place reproduce or make available the Software on Licensee s computer network if Licensee is only authorized by this Agreement to operate the Software on a single workstation x exceed at any given point in time the total number of network clients authorized by the applicable purchase order or ordering document to use or access the Software xi edit or modify the Software except as expressly authorized by Licensor including altering deleting or obscuring any proprietary rights notices embedded in or affixed to the Software xi use the Software in any manner that disparages Licensor Microsoft or Oracle or use the Software in a way that infringes the Intellectual Property Rights of the foregoing parties or xii use the Software in a manner that violates any federal state or local law rule or regulation or use the Software to violate the rights of any
203. tings by running the program with a command line switch To clear all registry entries e Create or modify a shortcut to the program and add C to the command line usually the Target entry in the Shortcut properties as follows assuming the default installation e C Program Files ARM exe C e When you run ARM a Confirm dialog asks if you want to clear all registry settings Click Yes ARM shuts down after executing this command e D Debugging mode Run ARM in debugging mode This is useful if you are experiencing difficulties in communicating with the Microlog Running in debugging mode makes ARM write out various logging files for use in analyzing any communications problems e X Go straight to the Download window Upon startup the Download window displays allowing you to immediately download data via RS_232 from legacy signal analyzers e A Active Sync Windows Mobile Device Center communications Upon start up the Mobile Device Viewer window appears allowing you directly unload data from your Microlog Analyzer SKF Analysis and Reporting Manager 10 1 User Manual 11 Troubleshooting Restoring the Program Defaults Changes to settings in ARM are automatically stored so they load the next time you run the software You can return most of these settings back to their shipped defaults instructions for each item are as follows Graphical Display Styles Restore graphical display style
204. to configure how data is processed and written into ASCII files in Universal File Format UFF To access the UFF Options dialog e Click Tools Program options select the File options tab and then click the UFF options button Reference Nodes Tab On the Reference nodes tab specify the response and reference coordinate information written into the UFF file header UFF Options Ralmence node File mang GATS Firas seer lhe tamed opion ba deriisgker of the Feces ard Reference coonchrager fet the UFF Glee created ten gearing date maple to LFF OF Use ndoinadion bakers hon the Sanaa aod rare O Eriw the coordinate nlovnation mamusi foreach record 2 Spey s bass cefing and increment the coondinat values e o 3 Comet Figure 8 6 Reference Nodes Tab e Select an option for identification of the response and reference coordinate information Fields include Use information taken from the analyzer record name Use if the records have been stored using a name that uses one of the following two naming conventions e XaaaYbbb where X is the reference direction code aaa is the reference direction number Y is the response direction code and bbb is the response direction number e N XaaYbb where N is any alphanumeric character X is the reference direction code aa is the reference direction number Y is the response direction code and bb is the response direction number SKF Analysis and Reporting Manager 8 9
205. to two traces for this reason orbit and polar plots have their own separate annotations Annotations comprise a number of different elements the text of the annotation itself its position defined in terms of the numerical units of the trace a typeface used for its display and a visibility control All of these parameters are set from the Annotation editor gt Annotations on waterfall plots are tied to the trace in the map nearest its current position To add an annotation to a plot e Right click the position where you want to place the annotation and click Edit add annotation from the right click menu The Annotation editor displays with the current coordinates displaying as the default X and Y positions Annotation editor Sov 2002 16 20 01 Eeposition 0 045705 values in targe 0 bo 0 960 s E Vistole Fon Verdana amp pt Change fort e x x Cancel Help Figure 4 57 Annotation Editor Dialog Enter the values in the fields described below Fields include Annotation text Enter the annotation text that you wish to appear on the plot X position Y position Enter the desired annotation position Visible Disable to temporarily hide the annotation Font Select the annotation s font Click Change font to select a different typeface the initial typeface will be the same as used for the plot thereafter subsequent annotations will take the typeface of the previous e Click OK ARM display
206. trend consists of one record containing one trace for each measurement in the CTC setup and can be viewed just like any other ARM data set such as a multiple plot SKF Analysis and Reporting Manager 6 17 User Manual Check to Conformance Module Support Trending of CTC Data PUMLEE STREP E gt Petter 1 Homoni flare ura oes of do EA ae JE TIa ne in DE Taraj pira Taj paced PLEET TAPTE Poston verica Mard l am m pn ee a T a E Eldan H Ban mi Figure 6 19 CTC Trend Or you can view individual trends be I ioiai Bard 2 erni ma Mir 2 eT Terai pka Figure 6 20 Individual Trend SKF Analysis and Reporting Manager User Manual Check to Conformance Module Support Trending of CTC Data A colored band is drawn to the right of the plot to show the band grade label value of the last reading this is the color used to draw the value in the CTC table If you have an existing data stream file open that was constructed from a trend directory and have added new files to this directory you can update your display in a single step by clicking the File menu s Update CTC trend option e To view the latest results from a trend directory directly click the File menu s Display CTC trend option The Choose trend set dialog displays allowing you to choose and edit any existing trend directories Lise trend Sef Choma a Check to confr mance frend et ip dinar CTC D
207. u s Order cursor option or press Ctrl G He pl es hae og jm DRO cures Tirar la Figure 4 48 Order Cursor Option When you display an order cursor on a waterfall plot ARM automatically selects the number of orders to display based on the smallest number of orders of any of the spectra in the plot multiplied by two For instance if the smallest number of orders in a spectrum in a run up recording is 10 ARM displays 20 orders To override this selection for the current waterfall plot e Select the Cursor menu s Number of orders option The Number of order cursors dialog displays SKF Analysis and Reporting Manager 4 41 User Manual Plots Cursors Number of Order Cursors To override this selection for the current waterfall plot e Select the Cursor menu s Number of orders option The Number of order cursors dialog displays Enter the number of orders required i al Figure 4 49 Number of Order Cursors Dialog e Enter any positive number or use the up down buttons to change the value in increments of one e Torevert to automatic selection by the program enter zero e Click OK to redraw the plot with the selected number of orders in the cursor Difference Cursor The difference cursor comprises two cursor lines with the difference of the amplitudes between these lines single cursor POINT value To display a difference cursor e Select the Cursor menu s Difference cursor or press Ctrl F 4 4
208. ude Analyst The data is stored in the record To copy the recommended gE overall limits e Click the Copy icon to the right of the calculations on the gE Calculator dialog The results copy to the clipboard e Paste the data into an application of your choice condition monitoring database Notepad etc SKF Analysis and Reporting Manager 4 73 User Manual 5 Digital Signal Processing Digital Signal Processing The Digital Signal Processing or DSP Module provides several post processing features including Fast Fourier Transform FFT analysis waterfall analysis and enveloped acceleration gE analysis All FFT waterfall and enveloped analysis options are accessible from the DSP menu Bas m e g Bm gios HEBE EC a it eet eo suaina lg ine FE PE F EEL Y i 007 iia ia l vr Lines al pent ee Era ird eti a MT Jur FPT aa Sh METTE DAMODAR E O Figure 5 1 Digital Signal Processing Module To select an item on the DSP menu e On the left panel select the record you wish to process e Select a processing option from the DSP menu gt The available options depend on the level of item selected in the left panel The first level represents the entire data structure one or more sets of data the second level represents a single piece of data or measurement containing one or more channels of information and the third level represents a single measurement channel The following example shows a second level sele
209. ue is still written into the record e Click Next The Confirm page displays 4 60 SKF Analysis and Reporting Manager User Manual Plots Global Editing Global Editing Expert English Metric The Units system page specifies the units to apply to all records in the selected data structure that use standard units alobal editing eopert Dens DATA Units system ESTES Padre jier Fis units pee pou eh Io apphy Engh C Kec Waluee ill be shown ui Meine urii Figure 4 70 Global Editing Expert Units System Page e Choose either English or Metric gt Acceleration always shows as g e Click Next The Confirm page displays SKF Analysis and Reporting Manager 4 61 User Manual Plots Global Editing Global Editing Expert Detection The Detection page defines detection scaling rms peak or peak to peak for all records in the selected data structure This only affects records in the frequency domain using Auto EUs obaj editing expert Demo TATA Owiection Select the Hoed andismaad dishechon ahat homs the detection ours for dresquenscye dornan chaste E rianda unis tou cen choses bahaan AHS Paak of Peek pesak Chee the Apply ncakeg check boio chea ang mashing roar oF Check i y appi the males satuer thor es Beck tet J oe JL Pte Figure 4 71 Global Editing Expert Detection Page To define detection scaling e Enable the Apply checkbox e Specify the type of scaling in the Stored and
210. ure 5 19 Waterfall Display You can create unlimited waterfall plots in the Digital Signal Processing window ARM automatically saves each process Each time an FFT is created it is added to the list of outputs stored in memory The Record drop down list displays each FFT process record 5 16 SKF Analysis and Reporting Manager User Manual Digital Signal Processing Cepstrum and Power Cepstrum Post Processing Cepstrum and Power Cepstrum Post Processing The DSP Module provides several features that allow you to post process spectrum measurements into a Cepstrum power Cepstrum or power spectrum These show repetitive patterns in the accentuated peaks to help understand the repetitive frequencies frequency gaps between peaks in the machinery A Cepstrum contains information about rate of change in the different spectrum bands It has higher more obvious peaks which makes it easier for the analyst to identify giving a better insight into the repetition of both signals Cepstrum was originally invented for characterizing the seismic echoes resulting from earthquakes and bomb explosions It has also been used to determine the fundamental frequency of human speech and to analyze radar signal returns These post processing options are accessible from the DSP Post Processing menu The selected option will display a check next to it in the menu fee DSP Vindo MAN uik FFT 2 qE A PPT inde F FFT Urei F DJ e i r hg AF Spectr
211. ut to expire within the next 14 days a message displays at start up warning of the license expiration Contact SKF to renew the license before the expiration date When the expiration date is reached you will not be able to access ARM features without a valid license key Existing data acquired or associated with ARM will remain part of the database and will not be lost During installation if a valid license key is not found or if it has expired you will receive a general installation error message and the installation will fail Make sure the valid license key has been added to the License Key Manager contact SKF to resolve any invalid or expired license key issues To enter the license key manually e From the License Key Manager enter the license key in the License Key field and click Add If the license key is valid it appears in the Key Summary list If the key is not valid you are informed in the Messages area of the dialog SKF Analysis and Reporting Manager 11 3 User Manual Troubleshooting General Troubleshooting To import a license key e f you have been provided with a license key file select File Import from the License Key Manager s menu A Windows Open dialog displays e Locate the license file and click Open Any license keys in the file that have not already been entered are appended to the Key Summary list 11 4 SKF Analysis and Reporting Manager User Manual
212. w s left panel with the first record highlighted SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window Tee m i 7 z HAEA TODA ji esata ana f z Hiie CHI j Paih PPT Sree PD te j T ii O ee SLs EITA FH E has 2 mer 1 ka marigi iep bam F Charr Ea DFI bae EE HUPE Cht Yii ah Moe FT a AE PP Che ae ode Pt TI es oa PC ia Sy PPT be EE PEPE A Y So TTI im EF POPE Vile ee F a EP FPL CA Yi i l O ya d Er i ee Ae M bee dE PEPE CT Y ian Ee P b EF LPE CAT via aa Fl a e E LO i pL HFa i EPT ee ce E i te he ak Ea Se ae Fe aa Tiaa Figure 5 6 Main Window If you chose to save output data to a new graph window a new floating graph window displays SKF Analysis and Reporting Manager User Manual Digital Signal Processing The Digital Signal Processing Window Single Spectrum between Cursors To display a single spectrum from a portion of the waveform e Select the Single spectrum option and check the Use samples between cursors checkbox Zoom lines appear on the graph plot designated by a separate color indicating the start and end points cursor positions of the source data that will be used in the waveform portion of the analysis Test pera GH gp SpE PS GEN Tce REL SET Ji PH fae rer D liran arated sal teed a C R bo 1 TAH i beep KENT inaia r Figure 5 7 Single Spectrum To adjust the source data
213. ware depending on the type of license you have obtained from Licensor i If you obtained a stand alone license of the Software you may install one 1 copy of the Software on one 1 computer residing in your principal business office ii If you obtained a network license of the Software you may install one 1 copy of the Software on as many networked clients workstations as authorized by your network license as set forth more particularly in the applicable purchase order or other ordering documents memorializing your license acquisition provided however that all network clients workstations are connected to a single licensed database residing in your principal business office iii If you obtained a network license of the Software you may connect to multiple licensed databases you may install the database dedicated clients up to the total number of networked clients acquired by you under the applicable purchase order or other ordering documents memorializing your license acquisition c Other Conditions of Use Licensor understands and agrees that the Software works in conjunction and is compatible with database software licensed to you by Microsoft or Oracle Upon installation of the Software the Software may detect an installed database software application from Oracle or Microsoft and if so the Software will be fully installed If no installed database software application from Oracle or M
214. xport UFF Options The following fields allow you to specify where ARM stores your setup files for graphical display styles and reporting All users application data The files are stored in the Application data directory for all users Note that this is a hidden folder in Windows as it is accessible by all users this allows sharing of program setup across different logins Program data director The files are stored in the main ARM data directory My documents The files are stored in your default documents path Other The files are stored in a specified directory SKF Analysis and Reporting Manager User Manual 9 System Preferences Program Options All ARM set up takes place on the Program options dialog To access this dialog select the Tools menu s Program options option e Specify settings on each of the 10 Program options tabs General Tab Specify general program settings Program options Decius Fie ophons Setup Lpcades Pepocts he General Fomsting Sang Diaa seam Source areis Hin nea hibap Hi Hos 10 pal Li Shew intention pana beloer graph in man wander E Play an elicechacteny Hur ehan chisa ea Welelorias warji Cl Utes lapac ion images for mara and booba espion options Send bey pesses bo the graph piot E Dea a border whan panting w comand a graph In the chpboaed El Rabi pam abten biag beer aag Communicasor Ci Show legacy analyser sera communications PLAZ 1 220 Show dats
215. y spaced using the current active z axis information If disabled spectra are evenly spaced SKF Analysis and Reporting Manager 4 13 User Manual Plots Display Style Editor Display Style Editor Spectrogram Tab The Spectrogram tab defines the colors used to draw spectrogram plots The colors on the spectrogram are defined by two or more color points between which the color values interpolate The default set includes five bands ranging from blue lowest amplitude to red highest Display stybe editor Walai Spectogram Obi Other Grid fines Axes Colour speecengram fou cen choose ny number of calou Bar s hi Ami epee eel he r and last daine The copboues wed kor rinira ard maam cempbitucies Hrest are ieipolated to anp riemedaie colours thet you delre Humbet of caoui ports Edit colour pork rumber Detaut Bw Figure 4 14 Display Style Editor Spectrogram Tab Fields include Number of color points Edit the value to change the number of color bands used As you do this the preview bar to the right updates to reflect this gt New bands default to black Edit color point number Select the color point number to edit and then click the Edit color button to select a new color for the color point number Three default color sets are also available e Default Click to use the default color setting e BW Click to use black to white e WB Click to use white to black SKF Analysis
216. y with these terms and conditions shall constitute sufficient cause for Licensor to terminate this Agreement and the license granted hereunder immediately and without an opportunity to cure This subsection 2 j shall not be construed to preclude or in any way effect a finding of materiality with respect to any other provision of this Agreement 3 LICENSE FEE The applicable licensee fees will be set forth in the quote issued to Licensee by Licensor or otherwise established in the applicable purchase order or other ordering documents memorializing your license acquisition 4 OWNERSHIP a Title Licensee understands and agrees that Licensor owns all Intellectual Property Rights related to the Software including custom modifications to the Software whether made by Licensor or any third party Licensee agrees that this Agreement effects a license not a sale of the Software and that the first sale doctrine as codified in 17 U S C 109 does not apply to the transaction effected by this Agreement Transfers Under no circumstances shall Licensee sell license sublicense publish display distribute assign or otherwise transfer hereinafter referred to collectively as a Transfer to a third party the Software or any copy thereof in whole or in part without Licensor s prior written consent Any Transfer effected in violation of this Section 4 b shall be void ab initio and of no force or effect b

SKF Analysis and Reporting Manager User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents