Home

Manual

1. 415 S Hs a a Important Safety Instructions Read all the instructions in the user manual carefully Keep the user manual for later use Follow all instructions and warning notes on the unit Pull all plugs before cleaning the unit do not use any liquid or spray cleanser Clean with a damp cloth Do not use the unit near water Do not put the unit on unstable surfaces or tables etc It might fall down and get damaged 7g There are slots in the housing for ventilation do not cover these slots because they guarantee the reliable operation of the unit and protect it against overheating The unit should only be mounted into a rack if sufficient ventilation is guaranteed 8 The unit is provided with a safety plug This plug can only be used with safety sockets These safety measures should by all means be followed In case the plug does not fit the socket e g with old sockets the socket should be replaced by an electrician 9 Do not place any objects on the power cable and make sure nobody can step on it 10 In case you use an extension cord make sure the sum of the power consumption of the connected units does not exceed the maximum power of the extension cord Furthermore the quantity of connected units to the socket must not exceed 10 Ampere 11 Do not spill any liquid on the unit Do not insert any objects through the slots of the unit as these might get in contact with parts that are live or might cause short circuits These
2. Art No 130415 LiGHTIN 6G MA Eight Way Booster RJ 45 The MA Eight Way Booster RJ 45 simplifies the distribution of the DMX signal and contributes to the safe operation of your DMX equipment The risk of only one single loop is thus being avoided and cable loss is being reduced The MA Eight Way Booster RJ 45 distributes DMX 512 1990 signals on to 8 separate outputs The direct output DMX THRU operates an independent from the unit distribution ofthe DMX signal e g in case of power failure Moving Load Eight galvanically separated outputs paw 4 DMX IN DMXTHRU OPTO ISOLATED OUTPUTS I es DMXTHRUUSED LOAD 0 DMX THRU UNUSED LOAD 7 LOAD O K i CD HT 1 NG EIGHT WAY DMX BOOSTER N 45 DMX Input Direct DMX Output Signal LEDs FEATURES DMXIN DMX Input with Overload Protection DMX THRU Direct DMX Output OUTPUTS Eight galvanically separated enforced outputs All DMX Outputs are protected against overload LOAD Moving Load adjustable via knob in case this unit is the last DMX receiver or distributor POWER LED confirms power supply O K LED confirms the proper receipt of data TECHNICAL DATA Front View of RJ45 socket Power Supply 100 240 VAC 50Hz or 60Hz Pn ae Pine Signal in out DMX 512 via RJ 45 Pin assignment il il Pin 1 Data LH Pin 2 Data Pin 3 6 Not assigned Pin 7 Data Ground Pin 8 Not assigned eMail info malightin
3. creened and the screen has to be connected to the ground of the respective socket Waldbiuttelbrunn 01 01 2001 leit Dipl Ing Michael Adenau lt fu eMail info malighting de Tel 49 931 497940 gt User s Manual MA Booster 1 in 8 RJ45 3
4. g de Tel 49 931 497940 User s Manual MA Booster 1 in 8 RJ45 1 MA Booster 1 in 8 RJ45 Measurements 19 Inch 483mm 1 Unit 44 5mm Housing WxHxD mm 435 x 42 x 170 Weight 2 2 Kg USERINSTRUCTIONS Connect your MA Eight Way Booster RJ 45 with your system gt NOTE The LOAD knob should have the basic setting of either 0 or 1 Choose a different setting for the moving load if the unit is going to be the last DMX receiver Fer a Se OHM 5k 1k 500 300 220 180 150 120 100 Back panel print Feed in DMX signal Please note that the POWER and SIGNAL OK LEDs should be on now gt NOTE The brightness of the SIGNAL IN LED depends on the signal itself THE UNIT IS NOW READY FOR OPERATION ACTIONS IN CASE OF AN ERROR If the booster can not be set in operating mode please check the safety fuse Normal operation will be confirmed by POWER and OK LED Errors can be caused by Contact problems on cables and sockets Short circuit and or reversed poles within the wiring Missing ground or missing data cable on one of the connections Missing moving load resistor Unsuitable cable and extreme cable lengths gt NOTE With total failure of the unit only the DMX THRU output will continue working MADE IN GERMANY Technical changes are subject to alterations 2 MA Lighting Technology GmbH Dachdeckerstr 16 D 97297 Waldbittelbrunn Fax 49 931 4979429 www malighting com Art No 130
5. may cause fires and or shocks 12 Do not service the unit yourself as live components are being uncovered upon opening and removing the housing so there is a risk of getting a shock etc Make sure to have all maintenance done by qualified service technicians 13 If one of the following conditions occurs please pull the plug and call the service Wire or plug is damaged or worn Liquid got into the unit The unit was exposed to rain or got damp The unit does not work properly even when following the instructions of the users manual Only set those components mentioned in the instructions as the improper setting of other components can lead to severe damage the later repair of such damages by a technician is often very time consuming E The unit fell down and the housing was damaged 14 Only use power cables which are marked safety proof 15 Do not use any high power walkie talkies or similar items near the unit ONS Dg DODD Declaration of Conformity according to 89 336 EWG and 92 31 EWG Manufacturer MA Lighting Technology GmbH Manufacturer s address Dachdeckerstrasse 16 D 97247 Waldbuttelbrunn confirms that the product Product Name MA Eight Way Booster RJ 45 Product Type MA Booster RJ 45 complies with the following product specifications Safety EN60065 VDE0860 IEC65 EMV EMC EN55103 1 E1 EN50081 1 EN55103 2 E2 EN50082 1 Additional Information All DMX512 In and Output cables have to be s

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents