Quick Glove - SI-TECH
Contents
1. E IN SWEDEN www sitech se2. Quick Llove User Manual Photography Wonas Wall INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN www sitech se HE INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN www sitfech se Quick Glove User manual We want to congratulate you on the purchase of the Quick Glove a Dry Glove System developed and manufactured by SI TECH in Sweden Quick Glove is an easy to use genuine Dry Glove solution Through the modular system of docking platforms such as the Quick Clamp and Quick Cuff you have the freedom to choose the solution that fits your needs Quick Glove Spanner Rings complete Benefirs e Easy donning and doffing e Opportunity to use a variety of Dry Gloves e Connects to the Quick Cuff and Quick Clamp attachment platforms e Heavy duty components Components The system itself consists of four com ponents per arm e Connecting Rings e Release Rings e Black and blue Spanner Rings e O rings Important information e Always dive the Quick Glove System with seals installed e The different Spanner Rings included in the package allows a variety of gloves to be fitted onto the Quick Glove System The different Spanner Rings are color coded which indicates various thickness You simply choose the thickness best fitted for your the glove of your choice 7 Docking platforms Innovative docking platforms makes the Quick Glove extremely versatile Below you will find the pl
3. al in a firm grip when pressing the seal assembly into the Wrist Ring Ensure that the inverted part of the seal does not slip from its position while being pressed into the Wrist Ring For the last part of the assembly you need to change grip and work as the right image shows Stretch the seal using the force direction of the arrow at the same time you should press the Stiff Ring into the assembly Repeat this operation in several steps 360 around the rings until the seal assembly reaches the bottom of the Wrist Ring Press the back end of the Wrist Ring with your index fingers N Press the flange area A of the Wrist Ring with your thumbs 1d 1 If for some reason you need to remove the Stiff Ring and or change seal simply press the Wrist Ring as hereby explained The arrows in the illustration show the directional force needed to release the assembly Do not use sharp tools or similar for this procedure as you might damage both the drysuit and the Wrist Ring 2 1 When attaching gloves you will need the Quick Glove assembly Spanner Rings and a pair of Dry Gloves Gloves are optional and are not included in the different Quick Glove packages The Quick Glove is delivered with blue and black Spanner Rings These have different thicknesses so that you can choose from different models of gloves 2 3 Put the Quick Glove assembly onto a flat surface and press the Glove Spanner Ring into the Connecting Ring Use even force
4. around the assembly and check for creases Ensure that the Spanner Ring aligns in height with the top of the Connecting Ring www sitfech se 2 2 Put the Spanner Ring inside of the glove Fold the glove collar and adjust it so that you avoid wrinkles Position the Spanner Ring ac cording to the armlength of your drysuit with the Quick Glove attachment platform mounted 2 4 Check the strength of the assembly by pulling the glove away from the Rings In the case you are using the black Spanner Ring and the assembly does not hold you can solve this problem by using the blue Spanner Ring which is thicker In the case you are using the blue Spanner Ring and the assembly does not hold you can solve this problem by using a thin layer of tape on the Spanner Ring system before and after the dive 3 2 Put on the Quick Glove with glove and posi 3 3 Press the system together step by step by Connecting tion the Quick Glove so that the O ring meets the applying gentle force on one side letting the Ring Release Quick Glove Example of Spanner Ring Stiff Docking Ring of the attachment platform O ring travel inside of the attachment platform Ring complete Docking Ring with Seal A In this manual we have choosed to use illustrative cross sections of the Quick Clamp attachment platform to exemplify how to at tach and detach the Quick Glove gt Spanner Ring and seal are deliberatly hidden for illustrative p
5. atforms currently available Docking Ring Spanner Rings e Quick Clamp Docking system for latex seals fixed to the suit Quick Clamp makes your drysuit compatible with the Quick Glove system Attaches to the latex seals of the drysuit without tools or glue Comes with a variety of Spanner Rings suited for a variety of seals Wrist Ring Stiff Ring e Quick Cuff Modular Quick Change Solution Quick Cuff turns your drysuit into a modular platform able of carrying a variety of different seals as well as the possibility of changing a torn or broken seal in minutes without tools or glue It is also fully compatible with the Quick Glove System and the Glove Lock QCP system Note that the Wrist Ring has to be glued onto the suit This manual does not address the topic of gluing attaching the Wrist Ring of the Quick Cuff to your drysuit Please visit www sitech se for information HA INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN Docking Ring Spanner Ring A 1a 1 Position the Spanner Ring inside of the latex seal Thread the Docking Ring over the seal and use both hands to press the Docking and Spanner Rings together This assembly must not be on top of the suit material only clamp seal between assembly 1a 2 When you have found the correct Spanner Ring it is of great importance that you press the rings so that the surfaces will align perfectly 360 around the
6. contact surfaces of the rings This is to minimize risk of leakage and fixation problems The red dotted line indicates the approximate rear position of the Spanner Ring This position might differ a little bit depending on the thickness of the latex seal 1b 1 Carry the seal through the Stiff Ring and invert the rear section of the seal to the outside of the Stiff Ring Position the rear end of the seal as the illustration shows AA WAI Jul ai Seal position The red dotted line indicates the final position of latex seals The blue dotted line indicates the final position of silicone seals NOTE The seal must be placed evenly around the Stiff Ring no bumps or gaps A tips for mounting of latex seals The latex seal can be secured with flexible tape before insertion into the Wrist Ring to prevent the seal from sliding Make sure the seal covers the locking groove Cut out section of assembly shows how the the components shall be aligned when assembled correct NOTE Seal must be used at all times A Wrist Ring B Stiff Ring C Final position of latex seal if used A D Safety flange of B silicone seal if used G HA INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN 1c 1 Initiate the assembling process by holding the seal as the left image shows This is just to align the rings and to ensure the seal stays in position for the first 2 3 of the travel length Hold the front end of the se
7. iving INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN www sitfech se SI TECH INNOVATOR OF HIGH PERFORMANCE DRYSUIT COMPONENTS HA INNOVATIVE SAFETY SOLUTIONS MADE IN SWEDEN WWW Si F e C h S e Troubleshoofing The Quick Glove has a user friendly design but needs to be handled properly to perform as intended Following explanations have been made using the Quick Clamp attachment platform Some of the problems explained can occur as well as be solved in the same ways when using the Quick Cuff as an attachment platform Quick Glove when attached The Spanner Ring has The Release Ring of the The Quick Glove assembly has properly into the Quick Clamp been pressed too far Quick Glove assembly is been guided in wrong and attachment platform into the docking ring positioned incorrectly ended up in a tilted position Meinfenence and Siora e Ensure that all components are clean and properly lubricated before diving the system e Disassemble and rinse all parts thoroughly in fresh water to remove sand and dirt e Make sure that the O ring and the groove in the Connecting Ring is clean before re fitting the O Ring Note O rings must be changed if damaged or contaminated by silicone lubricants Illustration no 1 is correct The other examples are incorrect e Disassemble the system when stored for longer periods Eb e The Release Ring of the Quick Glove assembly is threaded against its stop position on the Spare Pe
8. ris leading edge of the Connecting Ring is e The Release Ring is in contact with the flange of the Quick Clamp Item no Item Item no Item e The Spanner Ring is positioned so that the Quick Glove assembly can use full travel length into the Quick Clamp compartment Quick Glove Quick Cuff 60231 Connecting Ring 60420 Wrist Ring This scenario prevents the Quick Glove assembly from reaching full travel length into the Quick Clamp 60232 Release Ring 60200 Stiff Ring attachment platform This will most likely cause instability that can lead to leakage and in worst 80185 O Ring Quick Clamp case cause the Quick Glove to be fully released and fall of 6135720 Paraffin Wax 60931 Docking Ring 60211 Spanner Ring black for thick fabrics 60214 Spanner Ring yellow for thick fabrics This scenario will most likely cause instability that can lead to leakage and in worst case cause the 60212 Spanner Ring blue for medium fabrics 60219 Spanner Ring ESAS Quick Glove to be fully released and fall of 60233 Pressure Equalization Tube 60212 Spanner Ring blue for medium fabrics Seals O This scenario will most likely cause instability that can lead to leakage and in worst case cause 61150 Latex Seal X Small wrist circumference 12 5 14 cm 5 0 5 5 the Quick Glove to be fully released and fall off 61130 Latex Seal Small wrist circumference 13 5 16 cm 5 4 6 4 61100 Latex Seal Medium wrist circumference 15 5 18 cm 6 2 7 4 In all cases when you notice that
9. something is wrong we recommend you to detach the Quick Glove 61090 Latex Seal Large wrist Greum erence 18 21 cm 7 2 8 4 assembly from the docking ring Solve the issue that caused the problem and attach the system again 61025 Silicone Seal Standard wrist circumference 13 2 17 cm 5 2 6 7 61026 Silicone Seal Small wrist circumference 10 6 15 cm 4 2 5 9 Our products have been trusted by divers for more fhan 40 years SI TECH is a Swedish company focusing on manufacturing and marketing of components for protective suits such as drysuits rescue suits and garments designed for diverse hostile environments SI TECH is rooted in the diving industry which is still the companys core market The company was founded in 1971 by the diving pioneer Stig Insul n Core products Modular Quick Change Solutions Drysuit Valves Drysuit seals Dry Glove Systems Gas Inflation Systems and special compoents for military purposes Inhouse capabilities Development and production is made in house at our facilities in Brastad Sweden Inhouse competencies include CAD constr uction Injection Molding CNC Machining EMD Machining Assembly Sales and Marketing Logistics and Administration Our team of engineers sales and marketing personell have close co operation with the distributors and end users of our products SITECH AB Quick Glove manual Version 2 0 February 3 2013 SI TECH INNOVATIVE SAFETY SOLUTIONS MAD
10. urposes 3 4 Change grip and apply force on the opposite 3 5 Apply force to press the system together The Quick Glove rings are connected by a thread which moves them laterally in opposite side of the ring so that the O ring disappears bit by bit Ensure that the Quick Glove assem into the attachment platform bly has bottomed in the attachment platform direction of each other allowing detachment of the system When attaching the system the Release Ring must be turned in to its distinct stop position on the leading edge of the Connecting Ring Note that the Release Ring is a release aid not to be used for locking or for attaching When attaching the Quick Glove ring to the attachment platform it is of greatest importance that you do this gently in several steps Otherwise you might damage the O ring or have the O ring pressed out of its groove Make sure the O ring Is free from lubricant that may attract dirt For detachment of the system you should rotate the outer ring as displayed by the vertical arrow This will force the inner ring to travel out of the 3 1 Put your hand through the seal and fit attachment platform until completely released the Equalization Tube between seal and wrist Make sure the Equalization Tube reaches all the way through the seal Equalization Tube Whatever method chosen be certain the wrist seal be it latex or silicone is properly treated Always make a leakage and stress test on your drysuit seals before d
Download Pdf Manuals
Related Search