jbl On TIME™ 200P
Contents
1. JBL est une marque commerciale de Harman International Industries Incorporated d pos e aux tats Unis et ou dans d autres pays JBL On Time est une marque commerciale de Harman International Industries Incorporated iPod est une marque commerciale de Apple Inc d pos e aux tats Unis et dans d autres pays Made for iPod signifie que le dispositif lectronique a t sp cialement congu pour se connecter l iPod et qu il est certifi par le d veloppeur comme conforme aux normes de performance Apple Works with iPhone signifie que le dispositif lectronique a t sp cialement concu pour se connecter l iPhone et qu il est certifi par le d veloppeur comme conforme aux normes de performance Apple Apple n est pas responsable du fonctionnement de ce dispositif ou de sa conformit avec les normes de s curit ou r glementaires Harman Consumer Group Inc 8500 Balboa Boulevard Northridge CA 91329 USA 516 255 4525 USA only www jbl com 2008 Harman International Industries Incorporated All rights reserved Tous droits r serv s Document Number 950 0264 001 REV A H Harman International2. Up Down arrows or Menu Up Level to return to setting selection t Use this same procedure to modify a previously set Alarm To Enable Disable a Set Alarm Press Menu Up Level at any screen to display the Top Menu may require repeated presses depending on which menu state the unit was previously in Te 2 Use Up Down arrows to highlight Alarm Press Enter to confirm Select Up or press Alarm to go directly to the Alarm menu 3 Use Up Down arrows to highlight Alarm Press Alarm to enable disable the alarm An icon will be displayed on the left when the alarm is enabled and the alarm will sound at the set time SLE CUR Ro TORUM to the iPod iPhone select Dov Use the steps under Alarm Setting and choose iPod as the source On your iPod iPhone choose the song you would like to awaken to and press Play Set the volume level on the JBL On Time 200P unit Put your iPod iPhone to sleep by holding down the Play Pause button older iPod models may vary The JBL On Time 200P system can be put to sleep by pressing the Power button Note If you choose the last song on your iPod iPhone please place the iPod iPhone in repeat mode which will ensure that the iPod iPhone will continue playing past the last song GROWN gt JBL ON TIME 200P USER GUIDE Screen Contrast Brightness 1 Press the Menu Up Level button until you reach the Top Menu screen 2 Use Up Down arrows to select Display and press Enter 3 Use Up Down arrow
3. release to scan for the next station Setting Presets 1 While listening to AM FM radio press and hold Preset for 2 seconds zul The Radio Preset screen will be displayed 2 Use Up Down arrows to select slot to store preset Press Enter to confirm Preset is stored To Select a Preset for Listening 1 Press Preset once at any screen to display the Preset list 2 Use Up Down arrows to highlight Preset Press Enter to confirm Preset station will begin playing WWW JBL COM 7 8 CONTROLS CONT Alarm Setting 1 Press Menu Up Level at any screen to display Top Menu may require repeated presses depending on which menu state the unit was previously in Use Up Down arrows to highlight Alarm Press Enter to confirm or press Alarm to go directly to the Alarm menu Use Up Down arrows to select an Alarm slot to edit Press Enter to confirm Hour field becomes highlighted Use Up Down arrows to set Hour Press Enter to confirm Minute field becomes highlighted Use Up Down arrows to set Minutes Press Enter to confirm AM PM field becomes highlighted Use Up Down arrows to set AM PM Press Enter to confirm Use Up Down arrows to set Day of Week Weekdays Weekends Everyday or One Time Press Enter to confirm 8 Use Up Down arrows to set Alarm source Press Enter to confirm Alarm is set Note During alarm setting if there is no user input for 2 seconds display will return to the Now Playing screen Press any one of the Enter
4. FCC STATEMENT AND WARNING This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Any special accessories needed for compliance must be specified in the instruction manual MODIFICATIONS NOT EXPRESS
5. JBL ON TIME 200P AM FM RADIO AND SPEAKER DOCK FOR iPod iPhone JBL USER GUIDE English Fran ais Deutsch Italiano Espanol Nederlands 8 a Dansk Japanese aO Svenska Made for iPod Works with iPhone 2 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THE FOLLOWING PRECAUTIONS BEFORE USE Read these instructions heed all warnings and keep for future reference Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings a minimum distance of 10mm around the entire apparatus is required for sufficient ventilation No naked flame sources such as lighted candles should be placed on or near the apparatus Attention should be drawn to the environmental aspects of battery disposal The apparatus is to be used in moderate climates only Do not install near any heat sources such as radiators heat registers stoves or other apparatuses including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at the plugs and convenience receptacles and at the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as the power supply cor
6. LY APPROVED BY THE MANUFACTURER COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES The normal function of the product may be disturbed by strong electromagnetic interference If so simply reset the product to resume normal operation by following the instruction manual In case the function could not resume please use the product in another location CAUTION WARNING TO PREVENT FIRE OR IMPORTANT SHOCK DO NOT OPI ELECTRICAL SHOCK HAZARD DO NOT EXPOSE THE APPROPRIATE ADAPTER MUST BE INSTALLED BEFORE El NOT SRUETIGHTNING MU THIS PRODUCT TO RAIN OR MOISTURE INSERTING YOUR iPod iPhone INTO THE JBL PRODUCT FLASH AND CAUTION TO REDUCE POINT WITHIN MAKE SURE THAT THE CONNECTOR FOR THE iPod iPhone IS anne THERISKOF sHocK DO fl memantIEIS WARNING THE APPARATUS SHOULD PROPERLY ALIGNED WITH THE JBL PRODUCT S CONNECTOR USER SERVICEABLE PARTS ALERTING YOU WHEN INSTALLING YOUR iPod iPhone FAILURE TO DO SO ANNE SION NOT BE EXPOSED TO DRIPPING OR SPLASHING ALERTING YOU INSIDE REFER SERVICING J TO MEDE AND NO OBJECTS FILLED WITH LIQUID SUCH AS MAY CAUSE PERMANENT DAMAGE TO THE CONNECTOR FOR TO QUALIFIED SERVICE INSTRUCTIONS VOLTAGE INSIDE PERSONNEL AccOMPANING VASES SHOULD BE PLACED ON THE APPARATUS THE iPod iPhone RENDERING THE iPod iPhone INOPERABLE THE PRODUCT WWW JBL COM 3 4 JBL ON TIME 200p The JBL On Time 200P high performance loudspeaker dock and clock radio for iPod iPhone will revo
7. NG SOUND QUALITY Symptom Possible Problem Solution Note No sound from the JBL On Time 200P unit No power to the unit Incorrect source selection Make sure the wall power outlet or power strip has power Make sure all switches for outlet power strip are on and that all switches for speaker system are on Is the display on If not power is not getting to your JBL On Time 200P try the solutions shown Make sure the correct source is selected choose FM radio as a source Turn up the volume Check the system with a known good source such as your iPod iPhone Connect the Aux In cable to the headphone jack on your iPod iPhone No sound or weak signal from the AM FM radio Bad reception from current location Interference Reposition your JBL On Time 200P unit until you find better reception Check surrounding area for any possible interference wrap up any excess cables If you are still getting a weak signal from AM broadcasts connect the external AM antenna to the AM antenna jack Sound comes from one side channel only iPod iPhone or audio cable is not seated properly Make sure the iPod iPhone or Aux In cable is seated all the way into the JBL On Time 200P unit If you want to use a longer cable make sure it s a 3 5mm mini jack stereo male to male cable Distortion static crackling or hissing sounds Noise may be caused by interference from a monitor cell phon
8. Use Up Down arrows to highlight 12 hour or 24 hour format Press Enter to confirm Use Up Down arrows to set Hour Press Enter to confirm Minute field becomes highlighted Use Up Down arrows to set Minutes Press Enter to confirm AM PM field becomes highlighted 6 Use Up Down arrows to set Day of Week Press Enter to confirm The clock is set Note During clock setting if there is no user input for 2 seconds display will return to the Now Playing screen Press any one of the Enter Up Down arrows or Menu Up Level to return to setting selection Base Unit Control Navigation Power Select Up Volume Do lume Up Preset Select Down JBL ON TIME 200P USER GUIDE Playing Music 1 Press Source button to select the source iPod iPhone AM FM Aux 2 Press button to increase volume 3 Press button to decrease volume Languages Region 1 Press the Menu Up Level button until you reach the Top Menu screen 2 Use Up Down arrows to select Region and press Enter 3 Use Up Down arrows to select language Press Enter 4 Use Up Down arrows to select radio band region type Press Enter Radio Tuning 1 If AM or FM radio is already selected and playing use Up Down arrows to tune frequency hold either button and release to scan for the next station 2 Otherwise press Source until FM or AM is selected 3 Tune to the desired frequency using Up Down arrows hold either button and
9. cking station the docking station CLOCK SET AND CLOCK MEMORY Symptom Possible Problem Solution Note Clock is not set to correct time Incomplete setup Be sure to follow the clock setting procedure through to the end A confirmation screen will be displayed when set completely JBL On Time 200P unit does There are no batteries installed in Make sure you install three AAA batteries in the not retain memory settings the unit base of the JBL On Time 200P unit when there is a power outage or if the unit is unplugged Batteries may be low If you have installed three AAA batteries replace them as they may be defective JBL ON TIME 200P USER GUIDE WWW JBL COM English JBLis a trademark of Harman International Industries Incorporated registered in the United States and or other countries JBL On Time is a trademark of Harman International Industries Incorporated iPod is a trademark of Apple Inc registered in the U S and other countries Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards
10. d or plug is damaged liquid has been spilled or objects have fallen into the apparatus or the apparatus has been exposed to rain or moisture does not operate normally or has been dropped To be completely disconnected from the power input the main plug of the AC DC adapter shall be disconnected from the main The main plug of the AC DC adapter should not be obstructed OR should be easily accessed during intended use The marking information is located at the bottom of the apparatus The battery shall not be exposed to excessive heat such as sunshine fire or the like The apparatus and AC DC adapter shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus and AC DC adapter TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP INC SERVICE PERSONNEL Never remove grille covers in order to service the speaker system The speaker system does not contain any user serviceable parts IMPORTANT NOTE FOR ALL ELECTRONIC PRODUCTS Before inserting or unplugging audio cables from the source device s headphones or line level output jacks it is good practice to turn off the device first This will prolong the life of your unit help protect your device from static electricity and prevent potential damage JBL ON TIME 200P USER GUIDE
11. e or other transmitting device JBL On Time 200P unit is being over driven by an amplified audio source Volume level may be too high Turn monitor off to see whether noise is eliminated Move JBL On Time 200P unit s cables farther away from monitor Make sure the unit is connected to an appropriate source device Make sure all signal cables are inserted snugly into receptacles Check volume of source device some devices will distort the output signal if the volume is set to maximum Too much bass or treble Check the EQ setting on your iPod iPhone or source device We recommend that the source device EQ be set to Flat or Off JBL On Time 200P unit emits a loud hum or buzzing noise Input cables are not plugged in properly Check input cable connection Speaker system experiences radio frequency interference or picks up a radio station Input cable may be picking up interference Wrap up excess input cable to make it as short as possible Purchase a ferrite clamp and attach it over the input cable a clamp can be purchased at your local electronics store WWW JBL COM 13 14 TROUBLESHOOTING CHARGING AND SYNCING Symptom Possible Problem Solution Note iPod iPhone will not charge Wrong adapter is used Make sure correct adapter is used for your specific iPod iPhone model The iPod iPhone is not making full Make sure the iPod iPhone is seated securely into contact with the do
12. g Now Playing 38am 0N om 1057 FM Clock Alarm Display Sleep Region Di p AY HOT KEY POINT ue LA HOT KEY POINT on remote English VA on remote or base unit Spanish HR HR a French ALI AL7 German Brightness Contrast Set sleep timer Italian Min Min I 15 30 60 Dutch Select Alarm _ am pm Enable Adjust Adjust A prs a Hr pans confirmation and returns T a state to Top Level Menu Set day Min screen A Selection command Set Radio Type Press and hold for 2 sec at mom returns state to display US any point in menu structure A Selection command WEDITHFRI menu screen Europe to return to now Playing SU itp now displays setting SAME Japan confirmation and returns i state to Top Level Menu screen AM FM iPod iPhone Aux A Selection command Tone displays setting confirmation and returns state to Top Level Menu A Selection command displays setting confirmation and returns state to Top Level Menu screen screen WWW JBL COM 11 JBL ON TIME 200P MENU TREE CONT PRESET SOURCE SNOOZE HOT KEY POINT HOT KEY POINT HOT KEY POINT on remote or base unit on remote or base unit hold button for 3 sec on base unit E SNOOZE Set snooze Press and hold Preset timer button while listen
13. ing to Podi radio to store current AM gt FM a Aux station Select slot 1 10 and IPhone ASelaction command Preset 1 10 press enter to store displays setting confirmation and returns state to Top Level Menu screen Select and begin playing preset station 12 JBL ON TIIVIE 200P USER GUIDE SPECIFICATIONS JBL ON TIME 200P Frequency Response 70Hz 20kHz Power Consumption 30 Watts maximum JBL On Time 200P Transducer Phoenix SE 1 3 4 45mm x 2 full range per channel Power 2 x 6 Watts Input Impedance gt 5k Ohms Signal to Noise Ratio gt 80dB Input Sensitivity 350mV RMS for rated power output Power USA Canada 120 Volts 60Hz AC Power Europe UK 220 230 Volts 50Hz or 60Hz AC Power Japan 100 Volts 50Hz or 60Hz AC Power Australia 240 Volts 50Hz or 60Hz AC UL CUL CE Approved Dimensions 11 3 16 x 5 3 4 x 2 3 4 WxDxH 284mm x 146mm x 70mm Weight 1 8 Ib 0 8kg Remote Battery CR2025 Do not dispose of electrical appliances as unsorted municipal waste use separate collection facilities ME Contact your local government for infor mation regarding the collection systems available If electrical appliances are disposed of in landfills or dumps hazardous substances can leak into the groundwater and get into the food chain damaging your health and well being IMPORTANT Use UM4 AAA LRO3 alkaline type nonrechargeable batteries only TROUBLESHOOTI
14. lutionize the way you listen to your radio use your iPod iPhone and wake from a good night s sleep The JBL On Time 200P system is a revolution in time travel Imagine waking up to music on your favorite station or your iPod iPhone with no more buzzer or bad radio reception The compact time machine and sound center when connected to your iPod iPhone MP3 player or other music source produces clean powerful sound while providing time keeping alarm and radio features The system is the world s first time machine with an intuitive user interface that is easier than ever to navigate The JBL On Time 200P loudspeaker dock has full ability to navigate your iPod via IR remote Also not only can you wake up to your favorite radio station or song on your iPod iPhone but with the multiple alarm setting option you can set up to seven different alarms for His and Hers at whatever day or frequency needed EVERCHARGE TOPOLOGY The JBL On Time 200P speaker dock charges your iPod iPhone even when it s not connected to the computer or the system is off The system s memory is maintained by a backup battery Even with the power out it will provide the alarm function COE COMPUTER OPTIMIZED EQUALIZATION The JBL On Time 200P system equalization is computer optimized to provide a rich complete soundstage OCT OPTIMIZED COMPRESSION TOPOLOGY The JBL On Time 200P radio and loudspeaker dock utilizes a proprietary compression technology to ensure clea
15. n accurate sound at high output levels DISPLAY The large backlit LCD enables easy viewing and menu navigation Automatic dimming sets the correct brightness level in any room environment JBL ON TIME 200P USER GUIDE UNPACKING YOUR JBL ON TIME 200p Carefully unpack your speaker system and identify all its components df RS IR remote E FM antenna c deu D JBL On Time 200P Adapters for Power supply Audio cable AM antenna iPod iPhone QUICK SETUP INSTRUCTIONS Choose the appropriate adapter for iPod iPhone and place it into the docking station Then place your iPod iPhone into the adapter For backup memory install three AAA batteries in the battery compartment underneath the unit Connect the external AM antenna for better reception Unwind the FM antenna and straighten the wire for the best reception Plug the power adapter into the DC In jack and then plug the adapter into a wall outlet If an additional audio source is used connect the source to the Aux In jack RAD a exexeo 8 x n d feXexoo Gi 1 66 WWW JBL COM English 6 CONTROLS Setting the Clock 1 oF W r Press Menu Up Level at any screen to display Top Menu may require repeated presses depending on which menu state the unit was previously in Use Up Down arrows to highlight Clock Press Enter to confirm
16. n displays changes to Volume screen and decreases volume level Times out back to current menu Does not turn Amps on if off Enter or Selection Confirmation button Confirms selection on any JBL On Time 200P settings screen If Now Playing screen is displayed returns to last used menu screen Scroll Up Tune Up Moves highlighted box up on any JBL On Time 200P menu setting screen Increases digit value when setting Time hours and minutes and Snooze Timer In radio mode manually increases tuning frequency hold for Seek Scroll Down Tune Down Moves highlighted box down on any menu setting screen Decreases digit value when setting Time hours and minutes and Snooze Timer In radio mode manually decreases tuning frequency hold for Seek Menu or Up Level button If Now Playing screen is displayed takes user to top level menu screen If in menu settings steps up one level to previous field or menu screen Hold for 2 seconds to return to Now Playing screen Alarm hot key Takes user to Alarms settings of menu tree Button is active in any menu state If alarm is sounding turns alarm off When viewing alarms list enables or disables selected alarm Snooze button and Snooze Timer setting hot key If alarm is sounding enables snooze mode Press and hold for 2 seconds to enter Snooze Timer setting screen Directly switches the JBL On Time 200P source to iPod iPhone Sends Scroll Down command to iPod iPhone naviga
17. s to select Brightness or Contrast Press Enter 4 Adjust settings using Up Down arrows Note To set brightness to Auto press the Down arrow until Auto is highlighted Sleep Timer 1 Press the Menu Up Level button until you reach the Top Menu screen 2 Use Up Down arrows to select Sleep and press Enter 3 Use Up Down arrows to select minutes and press Enter 4 The sleep timer is started and the unit will power off when the timer reaches zero Snooze Timer Set 1 Press and hold the Snooze button for 3 seconds until you reach the Set Snooze Timer screen 2 Use Up Down arrows to select minutes and press Enter 3 Snooze feature will use this value the next time it is activated SNOOZE J WWW JBL COM REMOTE NAVIGATION Button Function Turns main unit power on and off Button is active in any menu state Preset the hot key A single press brings up the preset screen from any menu Repeated presses cycle through the preset list to the next preset slot Press and hold for 2 seconds when listening to the radio and the Now Playing screen is displayed to store current radio station di Volume Increase Display changes to Volume screen Increases volume level turns Amps on if off then increases volume If in snooze mode cancels snooze mode and turns Amps on Times out back to current menu Volume Decrease If in snooze mode no action If not in snooze mode and Amps are o
18. tion Works in iPod iPhone navigation only Sends Scroll Up command to iPod iPhone navigation Works in iPod iPhone navigation only Cycles to next source AM gt FM iPod iPhone gt AUX A single press starts sleep time countdown using currently set timer Press and hold for 2 seconds to enter Sleep Timer setting screen similar to base unit Next Track in iPod iPhone navigation only Does not affect JBL On Time 200P menu navigation or function C Previous Track in iPod iPhone navigation only Does not affect JBL On Time 200P menu navigation or function Enter Select in iPod iPhone navigation only Does not affect JBL On Time 200P menu navigation or function Similar function to the center button of the iPod iPhone Menu Up Level in iPod iPhone navigation only Does not affect JBL On Time 200P menu navigation or function Similar function to the Menu button of the iPod iPhone Play Pause Mute button When iPod iPhone is the active source a single press sends the Play Pause command to the iPod iPhone When AM FM or AUX is the active source a single press mutes audio amp on the JBL On Time 200P system 10 JBL ON TIME 200P USER GUIDE JBL ON TIME 200P MENU TREE Now Playin
Download Pdf Manuals
Related Search