USER MANUAL - onwirral.net
Contents
1. 25 ntroduc R GRs EAO FED ES PE EE ELLE 95 Zone Faults During 7 lt 25 Arm 7 ceptor 25 Oise The 7 nee z Arming and Disarming the 8 ra a Arm the System 8 oe 22 T S Part Arm the System 8 a a AS ANS PION Sae oN 85 To Silent Arm the 9 ie 22 2 To Cancel the Exit 9 vi 2 n To Disarm the System During Entry 9 ee 1 a To Disarm the System When Not in Entry 9 Ser ame Deleting User 28 Arming and Disarming 10 10 sas TO Part Arn hanson seed 10 all Remote To Silent 11 To Cancel the Exit Mode 11 5 Installation Details 31 To Disarm Areas During 11 kens ess rare 312. ARMING SUITE Area Arm Suite was used to arm the system ARMED WITH L F The system has been armed with a Line Fault condition present AREA Armed Area has been armed AREA Disarmed Area has been disarmed PART Armed Area has been Part Armed TIME Armed Area was armed automatically using one of the timer controls TIME Disarmed Area was disarmed automatically using one of the timer controls DEFERRED The arming mode was deferred for area ALARM ABORT An Open After Alarm Abort has occurred for area REMOTE Armed Area was armed using the Wintex UDL software REMOTE Disarmed Area was disarmed using the Wintex UDL software QUICK Armed Quick Arm from keypad RECENT Armed Area has been armed recently RESET AREAS Area have been reset using keypad following an Intruder alarm Engineer Reset A reset has been performed using an Engineers code Anti Code Reset Remote Reset A reset has been performed using the Anti code reset procedure A reset has been performed using the Remote Reset input Redcare Reset A reset has been performed by the Redcare Key switch Reset A reset has been performed using a key switch User Reset A reset has been performed using a User code EXP Reset A reset has been performed using the input on expander programmed as reset Remote PC Reset A reset has been performed by the remote download PC FUSE FAIL The
3. View Act Faults If any zones with the Activity attribute have not been activated within a certain time period an activity fault will be displayed at the time of arming Users with access to this function will be able to view the activity faults pA The system may have been programmed so that an activity fault will not allow arming If this is the case the system can only be armed once the zone in fault has been activated forced walk test gt To view activity faults proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press C until the display looks like this Press Ces the display will look something like this Press C to scroll up and down through the zones 2 Only zones with the Activity attribute that not been activated will be shown When all the required zones have been viewed press Cres the display should look like this Press to exit the menu and return to normal View Act Counts Users with access to this menu will be able to view the number of activity faults that have occurred on each area gt To view activity counts proceed as follows Enter a valid User code D 20 IQ gt the display should look like this Press C until the display looks like this Press Qes the display will look something like this Use keys 1 2 to view specific areas i e Area or use the key to search the display will look so
4. Disarm Areas When Not in 11 European Standards 32 To Clear nn nan 12 Warranty ARSA ENN 32 To Silence 4 4 snaran 12 Reset Alarm 2 22 1 4 4 11 12 2 0 nen 13 6 Quick Reference Guide cecececececoceocececeocececeocesee 33 User Reset sci 13 eae 33 13 oe QIU TTT 13 ser 5 2 35 TO 20 14 2 Programming 1 35 Re instating Zones 14 2 INS177 Premier 888 and 8168 Installation Manual Contents 1 About the Alarm System Introduction This section of the manual titled About the Alarm System is a thorough explanation of general system concepts and how the alarm system works The next section of this manual titled Operating the Alarm System explains how the alarm system operates and instructs on how to arm disarm and omit zones The following section of the manual titled The User Menu is reserved for more detailed system information like
5. The service timer has expired indicating that the system requires a service the system can still be used Contact your alarm company to advise INS177 Premier 888 amp 8168 User Manual The Arming Menu 3 The Arming Menu Introduction The normal day to day operations of the system are carried out using the Arming menu i e arming disarming omitting zones etc ch Not all functions are available to all users If a function cannot be selected it may be that it is not assigned to that user see page 26 for details The table below shows the various functions available Arming Menu Function Arm System Part Arm System Silent Arming Cancel Exit Disarm the System Use Anti code Omit Zones View Zone Status Omit 24Hr Zones Set Chime Areas View Act Faults View Act Counts User Menu gt access the Arming Menu proceed as follows The display will normally show the time amp date ch The top line of the display is programmable Enter a valid User code IQ D _ _D the display should look like this Press C until the required function is displayed to select that function press Qes Press to exit the menu and return to normal 2 If no keys are pressed the display will return to normal after 8 seconds Zone Faults During Arming Before attempting to arm the system ensure that the premises are secure
6. 2 If you were not present when the alarm activated the internal and external sounders will have already stopped The system will re arm but the external strobe will continue to flash gt silence an alarm proceed as follows The alarm will be sounding and the display will look something like this 2 The top line of the display is programmable Enter a valid User code D D D gt The internal and external sounders will stop the external strobe will continue to flash and the display will look something like this 2 The number of the zone that caused the alarm will be displayed in this case Zone 2 and the numbers of any subsequent zones activated if any will be alternating on the display The alarm now needs to be reset See page 13 for details 12 INS177 Premier 888 amp 8168 User Manual The Arming Menu To Reset an Alarm Once the alarm has been silenced see page 12 for details the system will need to be reset User Reset gt reset the alarm proceed as follows Enter a valid User code D 20 026 0 the display should look like this Press to clear the alarm the external strobe will stop the system will chime and the display will return to normal 2 If the system has been programmed to be reset by an Engineer pressing will not return the display to normal If this is the case see Engineer Reset for details The system may have been programmed to be reset
7. programming User codes and viewing the Event Log etc Overview The alarm system consists of a control panel one or more keypads and various detectors and sensors The control panel will normally be mounted out of sight in a utility room or basement etc The control panel houses the system s electronics and stand by battery There is normally no reason for anyone except an installer or service person to have access to the control panel The keypad is used to send commands to the system and to display the current system status via the English text display The keypad also provides audible feedback each time a key is pressed Each keypad will be mounted in a convenient location inside the protected premises near the designated points of entry exit User Codes Users of the alarm system will be assigned a unique 4 5 or 6 digit User code User codes are used to arm and disarm areas to which they are assigned Some User codes can also access additional options such as system tests and omitting zones The User code may not allow access to certain system functions For instance if the code is only allowed to arm and disarm area A it will not be able to arm or disarm other areas or the entire system Most User codes can arm and disarm areas assigned to them from any keypad on the system However Local Users will only be able to arm and disarm areas assigned to them from keypads assigned to the same areas Zones A zone i
8. the display will look something like this 2 Only areas that exist on the system be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only Use keys 1 to select a User type or use the key to search Standard User type the display will look something like this ch Please refer to page 25 for a list of available User types Press Qes the display will look something like this The following options will only be displayed if a Custom User type is selected Press to scroll and down through the various options the display will look something like this Press to enable disable the options then Press to continue the display will look something like this Press to scroll up and down through the various options the display will look something like this Press to enable disable the option then press to continue the display will look something like this 2 User Config will only be displayed if a Custom User type has been selected AND User Menu in the User Options has been enabled Use keys 10 to select a timer if required then press to continue the display will look something like this Press No to edit the User name text then press Qes when finished the display will look something like this
9. Event Log 17 Event Log 22 22 18 Event Log 244 4222 19 2 Using the Alarm 5 g y Change COCO sissesonssenso narordnssnskussstnkensesinnssks skonrestn ned 20 NERE RES 5 Edit Chime ZONES ceccceccoceccocccceccccccecceccceccescecescereeseseee 20 QUICK Arm 44 022224 6 System T sis ranira aaa 21 QUICK AM 1 14 099 6 DO Walk Test 21 QUICK Part 4 444044 44 0 4 0 6 Enable Engineer sssssssssesssssesessessssessesessessesesscescees 22 Reset and Service Message 6 Set System 4 1 nn nn 22 Fault 065 umeeesreesrreerresrrnnsrnnsrrnnrrnnrrnnnnnnnrnnnn 6 Set System 23 Other 68 4420 6 Change Timers 23 Change Ctl 1 24 3 The Arming 7 Setup wisccvciseccseccecesceneiectiectnetecesteeceetecssteennseees 25 7 Default User
10. However Duress users will activate any outputs programmed as Duress whenever their codes are entered 6 Arm Only Arm Only users can only arm or reset their assigned areas and view the event log 7 Door Strike Door strike users have no access to User functions or User menu options However Door strike users will activate any outputs programmed as Door strike whenever their codes are entered 8 Vacation Vacation users behave the same way as Standard users However Vacation users will automatically be deleted the first time that the Master User code User 01 is used to disarm the system 2 A Vacation user only be deleted by the Master user after it has been used to disarm the system at least once INS177 25 The User Menu Premier 888 amp 8168 User Manual 9 Custom Custom users can access any functions and User menu options that have been assigned to them in User Options and User Config This flexibility allows new User types to be created that have their own unique set of characteristics Any number of Custom users can be assigned to the system and each one will respond differently depending on the functions and features that have been assigned to them Custom users have no functions or features assigned to them when first selected NOTE User Functions and Options The table below shows the functions and options that are available to each user NOTE allowing t
11. Or Enter a valid User code D 20 06 0 the display should look like this Press C until the display looks like this Press Grea the display will look something like this Use keys 10 to select deselect areas 1 and Areas A B and C the display will look something like this 2 Only areas that exist the system can be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only When all the required areas have been selected press Ces the display will look something like this Leave the protected area When the areas have armed the exit tone if sounding will stop and the display will look something like this The selected areas are now part armed 10 INS177 Premier 888 amp 8168 User Manual The Arming Menu To Silent Arm Areas gt silent arm areas proceed as follows Ensure that the premises are secure all doors and windows closed etc and the Ready light is on Enter a valid User code 2202 20 26 0 the display should look like this Press C until the display looks like this Press Grea to arm areas Or Press fan to part arm areas Continue to arm as normal To Cancel the Exit Mode gt To cancel the exit mode proceed as follows The display will look something like this Enter a
12. What the User code number is going to be Which areas the user will need access to e Which User type they will be Whether the user should be time locked e What name will be assigned to the user User Number When users are assigned to the system they need to be identified by the control panel Each user is identified as Users 01 through to 49 Premier 888 or 01 through to 99 Premier 8168 User 00 is always the Engineer and User 01 is always the Master User User Code This is a unique 4 5 or 6 digit code number that is assigned to a user The system will allow a mixture of different length User codes The User code must be entered at a keypad before the alarm system can be operated see page 5 for details User Areas Any number of areas can be assigned to the selected user Assigning areas to a user determines which areas can be armed disarmed reset etc by that user In addition assigning areas to a user determines which of the area related functions i e omitting zones silent arming etc will be available to that user User Types The User type determines which functions are available to the user i e arming disarming resetting etc In addition the User also type determines which options the user can access i e Setup Users System Tests etc The following User types are available 0 Engineer Engineers can arm disarm omit zones silence alarms and reset their assigned areas In addition Engineers can
13. area are OFF omitted 2 area is only Part Armed when zones are omitted using the Part Arm 1 2 or 3 procedure Omitting zones manually see page 14 for details is not classed as Part Arming To Arm Areas gt arm areas proceed as follows Ensure that the premises are secure all doors and windows closed etc and the Ready light is on To do a quick arm press Grea Or Enter a valid User code D D _ _ the display should look like this Press the display will look something like this Use keys 1 2 to select deselect areas 1 D Areas the display will look something like this 2 Only areas that exist on the system be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only When all the required areas have been selected press Ges the exit tone will sound if silent arm has not been selected and the display will look something like this Leave the premises when the system has armed the exit tone if sounding will stop The selected areas are now armed To Part Arm Areas gt arm areas proceed as follows Ensure that the premises are secure all windows and doors not being omitted are closed and the Ready light is on To do a quick part arm press Car
14. by a two year warranty against defects materials or workmanship As the control panel is not a complete alarm system but only a part thereof Texecom cannot accept responsibility or liability for any damages whatsoever based on a claim that the control panel failed to function correctly Due to our policy of continuous improvements Texecom reserve the right to change specification without prior notice Premier is a trademark of Texecom 32 INS177 Premier 888 amp 8168 User Manual Quick Reference Guide 6 Quick Reference Guide Menu Page Arming Menu Arm the System Enter a valid User code DDD 8 Press Yes Part Arm the System Enter a valid User code CDD 8 Press Part Select a Part Arm using keys 1 8 and press Yes 2 2 then Ces Silent Arm the System Enter valid User code CIN NN 9 Use the Scroll key to find Silent Arm then press Yes or Part then or C Cancel the Exit Mode During the exit mode enter a valid User code DIDID 9 Press Yes Disarm the System During the entry mode enter a valid User code DIDID D 9 Arming Areas Enter a valid User code DIDID 10 Press Area Select areas using keys 1 8 then press Yes 2 2 then Ces Part Arming Areas Enter a valid User code LED 10 Use the Scroll key to find Part Arming then press Area then Select areas using keys 1 8 then press Yes 2 then Ces Silent Arming Areas En
15. keypads will be installed throughout the protected premises usually one at each entry exit door The keypads are used to perform all of the system functions i e Arming Disarming etc Premier LCDL Premier LCD Large Display Display Programmable Info LED G 7 D O O Normal 1 lt gt cop Ct Function O O ae 45 OO ED Display Window Premier LCD amp LCDL Display The 32 Character LCD display is used to show the status of the system and to view system data Power LED The Power LED will illuminate when AC Mains is connected to the control panel and will flash when the system is running on the standby battery Info LED The Info LED can be programmed to mimic the keypad output or show the armed status of an area Ready LED The Ready LED will illuminate when all zones assigned to the same area as the keypad are secure and the system is ready for arming Omit LED The Omit LED will illuminate whenever zones assigned to the same area as the keypad have been omitted Service LED The Service LED will illuminate whenever the system has a fault and requires attention i e Tamper fault reset required service required etc Normal and Function Keys Keys 1 to These keys are for entering User codes or inputting data when in programming mode Yes amp No Keys Qes amp The YES key is used to accept actions and t
16. return to normal 20 INS177 Premier 888 amp 8168 User Manual The User Menu System Tests Users with access to this option can test various system outputs to ensure that they operate correctly These include any outputs that have been programmed for specific operations i e bringing on floodlights sounding buzzers etc The internal sounders speakers and the external sounder can also be tested to ensure that they are operating correctly gt To perform system tests proceed as follows Enter a valid User code 220220 26 0 the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press Yes the display should look like this Press C until the required test is displayed i e Speaker the display will look something like this Press to test the selected output pA Only outputs that have been programmed for User Test can be activated When all the required outputs have been tested press the display should look like this pA Any outputs that have been left will automatically be turned Off when the System Tests menu is exited Press to exit the menu and return to normal Do Walk Test Users with access to this option can walk test any of the zones on the system to ensure that they operate correctly A walk test can only be performed when the system or area is disarmed 24 Hours zones except Fir
17. times to select a character on the same key press C4 to move the cursor along Character i The control panel also features Predictive text This can be used to make inserting words easier i e when spelling the word COLIN instead of typing 222666555444666 all that you need to do is type 26546 and the word is automatically selected ClOoOolzIAlrlmlo cS It is advised that predictive text be turned off when programming User name text as the library is not comprehensive enough to include all known names 5 6 lt lt 2 13 D G J M P T WwW Move Cursor The table to the right shows the keys to use and the Backspace delete characters that are assigned to them Copy Text Paste Text Predictive Text Key a GD gt Upper Lowercase Predictive text and Clear Screen INS177 35 Texecom www texe com Texecom Limited Bradwood Court St Crispin Way Haslingden Lancashire BB4 4PW England Technical Support Tel 44 0 1706 234833 Tel 44 0 1706 234811 Fax 44 0 1706 213187 INS177
18. valid User code IQ 20 026 0 the display should look like this Press Ces the exit tone will stop and the display will look something like this The exit mode has now been cancelled To Disarm Areas During Entry gt unset areas proceed as follows Enter the premises via the designated entry point the entry tone will start and the display will look something like this Enter a valid User code D 20006 0 the entry tone will stop and the display will look something like this The selected areas are now disarmed 2 If the entry timer expires an Internal alarm will occur for the duration of the 274 Entry Delay If the 2 Entry Delay expires an Intruder alarm will occur all internal and external sounders To Disarm Areas When Not in Entry gt Tounset areas proceed as follows The display will look something like this Enter a valid User code 220 20 26 0 the display should look like this Press Grea the display will look something like this Use keys GD to select deselect areas that require disarming i e gt and Areas A the display will look something like this 2 Only areas that exist on the system can be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only When all the required areas have b
19. 21 Use the Scroll key to find System Tests then press Yes then Use the Scroll key to select the an option then press Yes then When testing outputs use the Scroll key to select an option To test outputs press Yes or use keys 1 8 Press Menu when finished Do Walk Test Access the User menu ING I Gem Ges 21 Use the Scroll key to find Do Walk Test then press Yes then Test required zones Press Yes to accept the Time Press Menu when finished Enable Engineer Access the User menu 202002000 I Ge Ges 22 Use the Scroll key to find Enable Engineer then press Yes then Set System Time Access the User menu see above I Gem Ges 22 Use the Scroll key to find Set System Time then press Yes then Enter the correct Time HH MM CDICDICDI CD Press Yes to accept the Time Set System Date Access the User menu I Ge Ges 23 Use the Scroll key to find Set System Date then press Yes then Press Yes Enter the correct Date DD MM YY CDICRDICDICDICDICD Press Yes to accept the Date 34 INS177 Premier 888 amp 8168 User Manual Quick Reference Guide Menu Page User Menu Change Timers Access the User menu I Gem Ges 23 Use the Scroll key to find Change Timers then press Yes then Select the required timer using keys 1 8 a Press Yes when finished Change Ctl Times Access the User menu 202002000 Ge Ges 2
20. 4 Use the Scroll key to find Change Ctl Times then press Yes then Use the Scroll key to select the required timer Enter the required on time then press Yes GY GYM WD Ces Use keys 1 8 to select the days of operation and press Yes 10 Enter the required off time HH MM and press Yes GG MWD Ces Use keys 1 8 to select the days of operation and press Yes 10 Press Menu when finished User Setup Access the User menu I Gem Ges 25 Use the Scroll key to find User Setup then press Yes then Enter the required User number using keys 0 9 Press Yes Enter the required User code using keys 0 9 2222600260060 NG gt Press Yes Enter the required User type using keys 0 9 Press Yes Enter the required User time lock using keys 1 8 aD Press Yes Program the required User text DEDE Press Yes Alter Part Zones Access the User menu I Meny Ces 30 Use the Scroll key to find Alter Part Zones then press Yes then Select zones using keys 1 8 a Press Omit Chime or Part to select the required part omit or Press Menu when finished Call Rem PC Access the User menu I Gem Ces 30 Use the Scroll key to find Call Rem PC then press Yes then Use keys 1 3 to select the required number then press Yes 10 then Programming Text Text is programmed in a similar way to mobile phones Characters are selected by pressing the corresponding key the appropriate number of
21. Auxiliary 12V Fuse in device has failed AC POWER The control panel has registered a AC Mains failure LOW BAT The control panel has registered a low battery condition POWERED UP System Power Up without doing a factory restart BELL FUSE The control panel Bell Fuse has failed LINE FLT There is a problem with the telephone line Panel Line Fault The control panel line fault input has been activated Redcare Line Fault The Redcare has detected a line fault Com Line Fault The Com300 2400 or ISDN has detected a line fault Exp Line Fault The Input on expander programmed as line fault has been activated COMS FAILED The Com300 or Com2400 has failed to report to the Alarm Receiving Centre DOWNLOAD START An Upload Download has been initiated DOWNLOAD END The Upload Download has finished LOG ALERT 80 of the Event Log has filled since the last Upload Download DATE CHANGED The control panel Time has been changed TIME CHANGED The control panel Date has been changed 18 INS177 Premier 888 amp 8168 User Manual The User Menu Log Event Description PROG START An Engineer code has been entered PROG END The Engineer has logged out of the Programming menu BOX LID The control panel lid has been removed causing a Tamper alarm BELL Tamper A Bell Tamper input from device has been activated AUX Tamper An Auxiliary Tamper input from dev
22. Eng Code NVM Locking 26 INS177 Premier 888 amp 8168 User Manual The User Menu User Options This menu will only be displayed if the Custom User type is selected see page 26 for details This option defines which functions the selected user can access when their code is entered The following options are available 1 Yes No 2 Yes No 3 Yes No 4 Yes No 5 Yes No 6 Yes No 7 Yes No 8 Yes No 9 Yes No Arming Areas assigned to the selected user can be armed Areas assigned to the selected user cannot be armed Disarming Areas assigned disarmed Areas assigned to the selected user cannot be disarmed to the selected user can be Omitting Zones assigned to the same areas as the selected user can be omitted providing that they have the omit attribute assigned to them Zones assigned to the same areas as the selected user cannot be omitted Eng Reset Engineers only Areas assigned to the selected user can be Engineer reset after an Alarm has occurred Areas assigned to the selected user cannot be Engineer reset after an Alarm has occurred Local Arming Areas assigned to the selected user can only be armed from a keypad assigned to the same areas Areas assigned to the selected user can be armed from any keypad on the system Local Disarm Areas assigned to the selected user can
23. Quick Reference Guide Premier 888 amp 8168 User Manual Menu Arming Menu Continued View Act Faults Enter a valid User code Use the Scroll key to find View Act Faults then press Yes Use the Scroll key to scroll up and down through the zones Press Yes when finished 226 26 0 0 then View Act Counts Enter a valid User code Use the Scroll key to find View Act Counts then press Yes Select the required areas using keys 1 8 Press Yes when finished CIN NE then a Menu Page User Menu Access the User Menu Enter a User code 17 Press Menu and then press Yes then Viewing the Event Log Access the User menu 2020020020 I Meny Ces 17 Use the Scroll key to find View Event Log then press Yes then Press Down for the previous event back in time lt gt Press Up for the next event forward time lt gt Change User Code Access the User menu 0200200209 20 Use the Scroll key to find Change Code then press Yes then Enter a new User code 4 5 or 6 digits Press Yes to accept the code Edit Chime Zones Access the User menu 20 Use the Scroll key to find Edit Chime Zones then press Yes then Select zones using keys 1 8 aD Press Chime to select the zone for chiming Press Menu when finished System Tests Access the User menu 202002000 Ge
24. To initiate a call proceed as follows Enter a valid User code 220220 0206 0 the display should look like this Press the display should look like this Press Ces the display should look like this Press C until the display looks like this Press Ces the display will look something like this Use keys 1 3 7 to select a telephone number Call Back number 2 the display will look something like this Press Qes the display should look like this Press to exit the menu and return to normal 30 INS177 Premier 888 amp 8168 User Manual Installation Details 5 Installation Details Notes INS177 31 Installation Details Premier 888 amp 8168 User Manual European Standards Conforms to European Union EU Low Voltage Directive LVD 73 23 EEC Electro Magnetic Compatibility EMC Directive 89 336 EEC The CE mark indicates that this product complies with the European requirements for safety health environmental and customer protection This equipment is designed to enable an intruder alarm system in which it is installed to comply with the requirements of security grades 1 or 2 of EN 50131 1 and EN 50131 6 and is suitable for installation in any indoor environment Warranty All Texecom products are designed for reliable trouble free operation Quality is carefully monitored by extensive computerised testing As a result the control panel is covered
25. access the Programming menu and all User menu options Engineers can also change their own User codes and assign new users to the system 2 default Engineer User type User 00 can assign any User types to the system Engineers can only disarm areas that were armed using an Engineer code They cannot disarm any areas that were armed with another User code 1 Master Master users can arm disarm omit zones silence alarms and reset their assigned areas In addition Master users can access all User menu options Master users can also change their own User codes and assign new users to the system The Master user will also activate any output programmed as Door Strike 2 Manager Manager users can arm disarm omit zones silence alarms and reset their assigned areas In addition Manager users can access all User menu options except Setup Users Manager users can also change their own User codes 3 Standard Standard users can arm disarm omit zones silence alarms and reset their assigned areas In addition Standard users can access all User menu options except for Setup Users System Tests and Change Timers Standard users can also change their own User codes 4 Local Local users behave the same way as Standard users However Local users will only be able to arm and disarm areas assigned to their codes from keypads assigned to the same areas 5 Duress Duress users behave the same way as Standard users
26. all doors and windows closed etc and the Ready light is on If an attempt is made to arm the system with any zones active e g door ajar open window etc the display will show the zones that are active The display will look something like this pA Active zones that will be secured during exit e g entry zones like the front door can be ignored all other zones should be secured To continue arming with zone active press Qes The internal sounders will bleep repeatedly fault tone and the display will show the zones that are active The display will look something like this A The fault tone will stop and the exit tone will resume when all zones are secure If it is necessary to leave a zone open then it must be omitted see page 14 for details If an active zone cannot be secured then it may be in fault in this case contact the alarm company immediately Arm Fail If the exit procedure is started and zones are still Active at the end of the exit procedure an Internal alarm will occur internal sounders only and the strobe light on the external sounder will flash If this occurs the arm fail must be cleared and the zone in fault identified before the system can be armed see page 12 for details on clearing an Arm Fail The Ready LED To help prevent faults during arming a Ready light has been provided The Ready light works as follows e f the Ready light is on steady then all zone
27. anual Using the Alarm System 2 Using the Alarm System Introduction All users of the alarm system should read sections 2 3 and 4 carefully so as to familiarise themselves with the Enter A Va operation of the alarm system The operation of the system is divided up into two sections the Arming menu and the User menu To access either menu enter a valid User code NG gt mistake is made whilst entering a User code simply re enter the correct code rA The control panel may have been programmed so that too many incorrect code entries will cause a Tamper alarm or lock the keypad out for 5 minutes Once in the Arming menu various functions can be selected by using the CS key Once a function has been selected press to access that function Whilst in the Arming menu the User menu can be selected by pressing Qem Once in the User menu various options can be selected by using the key Once an option has been selected press to access that option To exit from either menu press the key and the system will return to normal The diagram to the right shows both menus and all the functions and options available cS Not all functions and options are available to all users If a function or option cannot be selected it may be that it is not assigned to that user see page 26 for details 2 0 0 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 INS177 5 Using the Alarm Syste
28. by Anti code if this is the case see Anti code Reset for details Engineer Reset If the system has been programmed to be reset by an Engineer following an alarm activation you will still be able to silence the alarm by entering a valid User code see page 12 for details gt reset the alarm proceed as follows Enter a valid User code IQ D _ _ the display will look something like this 2 number of the zone that caused the alarm will be displayed in this case Zone 2 and the numbers of any subsequent zones activated if any will be alternated on the display Contact the telephone number on the display if programmed or the telephone number at the rear of this User Guide 2 area that the alarm occurred cannot armed again until the alarm has been reset Anti code Reset If the system has been programmed to be reset using an Anti Code following an alarm activation you will still be able to silence the alarm by entering a valid User code gt reset the alarm proceed as follows Enter a valid User code 2202 20 06 0 the display will look something like this Press Gen the display will look something like this 2 Where 4281 is the random code this example Contact the telephone number on the display if programmed or the telephone number on the last page of the Control Panel User Guide with the random code number in order to obtain a 4 digit Anti Code 2 T
29. cess level than themselves Also if a user assigns a Custom User type functions that are not available to them cannot be assigned to the Custom user No The selected user cannot access the Setup Users option 6 Eng Access Yes The selected user can access the Enable Engineer option allowing them to authorise Engineer access or Remote UDL access to the system see page 22 for details No The selected user cannot access the Enable Engineer option 7 Add Eng Code Engineers only Yes The selected user can assign new Engineers to the system No The selected user cannot assign new Engineers to the system 8 NVM Locking Engineers only Yes The selected user can alter the NVM Locked option in System Options No The selected user cannot alter the NVM Locked option in System Options User Time Lock This option allows the selected user to be denied access to the system at different times of the day and days of the week When a Control Timer is assigned to a user the User code will not allow access to any functions during the timer On period User Name Text Each user can be assigned up to 16 characters of name text This can be beneficial when reading the log as identification of people is made easier Text is programmed in a similar way to mobile phones Select characters by pressing the corresponding key the appropriate number of times to select a character on t
30. ch For details on programming text please refer to page 35 Press the display should look like this Press to exit the menu and return to normal INS177 29 The User Menu Premier 888 amp 8168 User Manual Alter Part Zones When a Part Arm 1 2 or 3 is selected pre programmed zones are omitted to allow access to certain parts of the building This option allows these zones to be programmed or altered by any User that has access to the Omit menu gt program part arm zones proceed as follows Enter a valid User code D NG gt the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press until the display looks like this Press Ces the display should look like this Enter a zone number gt or use the CS key to search the display will look something like this Press to select Part Arm 1 Press to select Part Arm 2 Press to select Part Arm 3 The display will look something like this 2 The zone will now be omitted when Part Arm 1 is selected Repeat for other zones When all the required zones have been selected for their particular Part Arms press the display should look like this Press to exit the menu and return to normal Call Remote PC This option is used to initiate a call to a remote uploading and downloading computer gt
31. d during a Part arm allowing access to the upstairs of the house at night pA All of the areas together form the entire alarm system Example 3 Commercial Premises Office 1 in an office block could be area A office 2 could be area B and office 3 could be area C Each area can be armed and disarmed independently from each other For instance any of the offices in example 2 above could be armed and disarmed to allow access without affecting the other offices 2 All of the areas together form the entire alarm system Example 1 Office Block The foyer of the office block in example 3 would need to be armed when the last office is armed and disarmed when the first office is disarmed Because the foyer is a global area used by everyone the zones in that area need to be assigned to areas A B and C This ensures that the zone is only recognised by the system when ALL areas A B amp C are armed allowing access to the foyer even if one of the areas is still armed Monitoring This alarm system is capable of reporting Intruder alarms Panic alarms Fire alarms and other types of information over telephone lines to an Alarm Receiving Centre If you accidentally set the alarm off call the Alarm Receiving Centre immediately to prevent an unnecessary response A The monitoring function must be enabled before it will work INS177 About the Alarm System Premier 888 amp 8168 User Manual Keypads One or more
32. d in memory Event Log Hotkeys When viewing the system log there are 8 hotkeys available These hotkeys allow certain events to be found easier without the need for searching The following hotkeys are available 1 gt Priority Alarms PA Fire etc Normal Alarms Guard 24hr Entry Exit etc Opens and Closings Arm Disarm etc Omits and Reinstates Zone Omits etc Gx Maintenance System Tests Engineer Program etc Tampers Zone Bell Aux etc Test Calls Communicator Active successful etc Next Matching Event On Screen Event 2 The CHIME key will jump straight to an event that matches the one that is displayed on the screen i e if Code 01 is displayed pressing CHIME will find any preceding event that relates to a User code being entered INS177 The User Menu Premier 888 amp 8168 User Manual Change Code Users with access to this option can change their own User codes if required User codes are unique to each user and can be 4 5 or 6 digits long 2 Only the User code that is entered to access the change code menu will be changed gt To change a User code proceed as follows Enter the User code that requires changing 2 DG gt the display should look like this Press Meny the display should look like this Press Qes the display should look like this Press C until the display looks like this Press Ces the display will look something li
33. e 1 274 Code output type The selected user will operate as normal Vacation The selected user is enabled the first time it is used to disarm the system and can be used as many times as required However it will be automatically deleted the first time that the User 01 code is used to disarm Vacation users will only be deleted by the Master user once they have been used on the system The selected user will operate as normal Door Strike The selected user will activate any outputs programmed as Door Strike whenever their codes are entered The selected user will not activate any outputs programmed as Door Strike Call Rem PC The selected user has access to the Call Remote PC option allowing them to initiate a call to a remote upload download PC see page 30 for details The selected user does not have access to the Call Remote PC option Duress Code The selected user will activate any outputs programmed as Duress whenever their codes are entered The selected user will not activate any outputs programmed as Duress Open Close The selected user will report open disarm and close arm events to an Alarm Receiving Centre every time they arm or disarm The selected user will report open disarm and close arm events to an Alarm Receiving Centre INS177 27 The User Menu Premier 888 amp 8168 User Manual User Config This menu will only be d
34. e and Tampers are disabled during walk test allowing Audible PA buttons Silent PA buttons etc to be tested To perform a walk test proceed as follows Enter a valid User code 2202 20 06 0 the display should look like this Press the display should look like this Press Yes the display should look like this Press C until the display looks like this Press Ces the display will look something like this Use keys 1 2 to walk test specific areas 1 gt Area A the display will look something like this 2 Only areas that exist on the system be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only Press Ces the display will look something like this Every time zones are activated the keypad will chime and the display will look something like this Press Meny when finished the display should look like this Press to exit the menu and return to normal INS177 21 The User Menu Premier 888 amp 8168 User Manual Enable Engineer If Engineer access either on site or via remote download computer has been programmed as User authorised this option must be used to allow the Engineer access to the programming menu Users with access to this option can authorise Engineer access 2 Engineer access i
35. een selected press Ces the display will look something like this The selected areas are now disarmed INS177 11 The Arming Menu Premier 888 amp 8168 User Manual To Clear an Arm Fail When the system tries to arm with zones active open the internal sounders will sound and the external strobe will be flashing to indicate a problem 2 If you were not present when the arm fail occurred or you do not clear the arm fail condition the internal sounders will continue to sound and the external strobe will continue to flash The system is NOT armed gt Toclear the arm fail proceed as follows The alarm will be sounding and the display will look something like this Enter a valid User code D D D gt The internal and external sounders will stop but the external strobe will continue to flash and the display will look something like this 2 The number of the zone that caused the alarm will be displayed in this case Zone 2 and the numbers of any subsequent zones activated if any will be alternating on the display To try to arm again clear the fault and press Ces Or To clear the arm fail display enter a valid User code and press For details on preventing an Arm Fail condition please refer to page 7 To Silence an Alarm When an alarm occurs on the system the internal and external sounders will normally sound for a pre programmed time normally 15 minutes
36. he same key press the C4 key to move the cursor along Deleting User Codes If a User code needs to be deleted from the system this must be done by a user that has access to the Setup Users menu see page 25 for details gt delete User codes proceed as follows Ensure that Setup Users is selected the display should look like this Press Ces the display should look like this Select a user from 1 to 49 Premier 888 or 1 to 99 Premier 8168 then press Ces the display should look like this Press Geese the display will look something like this 2 Where 15 is the selected User number Press to confirm deletion of the selected User code Press Gens to exit from Setup Users 28 INS177 Premier 888 amp 8168 User Manual The User Menu gt assign new users proceed as follows Enter a valid User code 2202 20 026 0 the display should look like this Press the display should look like this Press Ces the display should look like this Press CD until the display looks like this Press Ces the display should look like this Select a User from 1 to 49 Premier 888 or 1 to 99 Premier 8168 Q IQ then press Qes the display should look like this Enter the new User code 22020200200 then press Cres the display will look something like this Use keys 10 to select deselect areas i e 1 gt and Areas and C then press Ces
37. he NO key is to cancel actions Omit Key Grea This key is used to omit zones see page 14 for details Chime Key This key is used for turning the zone chime feature on and off see page 15 for details Part Key This key is used to part arm the system see page 6 for details It can also be used to do a Quick part arm if this feature is enabled Area Key This key is used to arm or disarm particular areas see page 10 for details It can also be used to do a Quick area if arm feature is enabled Reset Key eset This key is used to exit from the Arming or User menu to reset the system and also to display the Reset Anti code and Service messages see page 6 for details Scroll Key C This key is used to scroll through the various menus and options Menu Key Grea This key is used to select the Arming or User menu Emergency Keys In case of emergency the alarm system can provide three immediate emergency alarms by pressing and holding two specific keys for three seconds Emergency Alarm Press Keys Panic Fire amp Medical amp 2 The emergency keys be enabled disabled for each keypad on the system The Panic alarm can be individually programmed for either audible or silent operation for each keypad The Panic alarm can be individually programmed for either instant or delayed operation for each keypad INS177 Premier 888 amp 8168 User M
38. he area that the alarm occurred in cannot armed again until the alarm has been reset Enter the Anti code that has been given i e 5624 the display will look something like this Press Ces the display should look like this Press to clear the alarm The external strobe will stop the system will chime and the display will return to normal INS177 13 The Arming Menu Premier 888 amp 8168 User Manual To Omit Zones It is possible to exclude omit or include individual zones during setting i e if a zone is in fault Users with access to this function can only omit zones that have been programmed as Omittable gt To omit zones when arming proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press m the display will look something like this Enter the zone number CDD CD or use the C key to search the display will look something like this 2 If the zone can be omitted there will be a Star to the right of the zone number Only zones that have the Omit attribute assigned to them can be omitted Press to omit the selected zone the display will look something like this cS A Star will appear to the left of the zone number to indicate that the zone has been selected for omitting Repeat for other zones if required When all the required zones have been selected for omitting press Qaem the display should look like
39. hem to view the event log All users have access to the View Event Log menu User Functions Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Arming Arming Arming Arming Arming Arming Arming Arming Disarming Disarming Disarming Disarming Disarming Disarming Disarming Omitting Omitting Omitting Omitting Omitting Omitting Omitting Eng Reset Local Arming Local Disarm Silent Arm Silent Arm Silent Arm Silent Arm Silent Arm Disarm First User Menu User Menu User Menu User Menu User Menu User Menu User Menu Eng Program Vacation Door Strike Door Strike Call Rem PC Call Rem PC Call Rem PC Duress Code Open Close Open Close Open Close Open Close Open Close Open Close User Options Open Close Open Close Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Change Code Change Code Change Code Change Code Change Code Chime Zones Chime Zones Chime Zones Chime Zones Chime Zones Change Timer Change Timer Change Timer System Tests System Tests System Tests User Setup User Setup Eng Access Eng Access Eng Access Eng Access Access Access Add
40. hen a zone is enabled for Chime the Keypad will generate a Chime tone every time the zone is activated Users with access to this function will be able to turn Chime on and off for selected areas Zones within an area can be individually programmed for chime in Edit Chime Zones see page 20 for details gt set Chime areas proceed as follows Enter a valid User code IQ 20 IQ gt the display should look like this Press the display will look something like this Use keys GD to select deselect areas 1 0 and Areas A B and C the display will look something like this 2 Only areas that have been programmed for Chime can be selected A Star means the area can be selected and a Dot means the area cannot be selected Pressing will select deselect all areas Pressing will toggle between areas A to H and I to P Premier 8168 only When all the required areas have been selected for Chime press Qes the display should look like this Press to exit the menu and return to normal Turning Chime On and Off The display will normally show the time amp date gt To turn Chime On proceed as follows Press Gnim the keypad will chime to indicate that Chime is now enabled gt To turn Chime Off proceed as follows Press the keypad will bleep to indicate that Chime is now disabled INS177 15 The Arming Menu Premier 888 amp 8168 User Manual
41. hyn PRO ACTIV PUBLICATIONS OF THE YEAR BEST MANUFACTURER 2000 2000 amp 1999 THANK YOU FOR VOTING TEXECOM USER MANUAL Premier 888 Premier S1lGS Security Control Panels CC Texecom www texe com Contents Premier 888 amp 8168 User Manual 1 About the Alarm SySteM 3 View Zone StatUS sssssssersasssnsssnsnnnsnnnnnnnnnnnrnn nn rna a 14 Omit 24Hr ZONES 0 442444 11 4 44 0 444141 15 Introduction aaudacuscueuseuscaceocescvneseucavaenauusudssevenvceceseasvarauuces 3 Reinstate 15 E 3 Set Chime enn nn 15 5 0 aici stans 3 Turning Chime On and 15 E View Act Faults sscscssssssssssssssssssssssssssesssssssseessasssee 16 Global 7 View Act COUNIS nn rann nan 16 nicer ee 3 hn eel 3 4 User 17 Keypads 2 2 T 4 Display Window ja te 4 Accessing the User 4 2 2 20 17 Normal and Function Keys BA ay et opt SA sacs 4 View the
42. ice has been activated EXP Tamper The cover of expander has been removed RKP Tamper The cover of keypad has been removed RKP LOST Keypad has been lost from the network EXP LOST Expander has been lost from the network FIRE Active Zone programmed as Fire Alarm has caused an alarm Zone Tamper Zone has caused a Tamper alarm Zone Active Zone has been activated Zone Restore Zone has restored to its normal condition Zone Omitted Zone has been omitted Zone Un Omit Zone has been reinstated Zone Test Start Zone has been put on test Zone Test End Zone has been removed from test RKP LOCKED Keypad has been locked out from too many invalid key presses CODE Too many invalid key presses have caused a tamper alarm from keypad TEST FAIL Zone has failed its Soak test MANUAL TEST CALL A manual test transmission has been initiated AUTO TEST CALL An Automatic test transmission has been initiated WALK The Walk Test mode has been initiated TESTED Zone has been tested DEFAULTS LOADED The factory default values have been loaded into memory FIRST KNOCK Zone which is programmed as double knock has activated for the first time CURRUPT EVENT No event has been store
43. isplayed if a Custom User type is selected AND User Menu User Option 9 is enabled see page 27 for details This option defines which User menu options the selected User can access when they enter their code The following options are available 1 Change Code Yes The selected user can change their own User code No The selected user cannot change their own User code If the User code needs to be changed another user with access to Setup Users will have to do it 2 Chime Zones Yes The selected user can access the Edit Chime Zones option allowing them to select which zones chime when activated see page 20 for details No The selected user cannot access the Edit Chime Zones option 3 Change Timer Yes The selected user can access the Change Timer option allowing them to override the Control Timers if required see page 23 for details No The selected user cannot access the Control Timer option 4 System Tests Yes The selected user can access the System Tests option allowing them to walk test zones activate the external sounder etc See page 21 for details No The selected user cannot access the System Tests option 5 Setup Users Yes The selected user can access the Setup Users option allowing them to alter existing users or assign new users see page 25 for details However users cannot assign User types to the system that have a higher ac
44. ke this Enter the new User code 22020260000 the display will look something like this Press Qes the display should look like this Press to exit the menu and return to normal Edit Chime Zones When a zone is enabled for Chime the Keypad will generate a Chime tone every time the zone is activated This function allows you to turn the Chime feature on and off on selected zones Users with access to this option will be able to program zones for Chime 2 Zones will only cause the sounders to chime if the area they are assigned to is enabled for Chime see page 15 for details gt program Chime zones proceed as follows Enter a valid User code D 20 gt the display should look like this Press the display should look like this Press Qes the display should look like this Press C until the display looks like this Press Yes the display should look like this Enter a zone number 220 or use the CS key to search the display will look something like this Press to select Chime once for Chime 1 twice for Chime 2 etc to omit the selected zone the display will look something like this 2 The zone will only cause the sounders to Chime if the area it is assigned to is enabled for Chime see page 15 for details Repeat for other zones When all the required zones have been selected for Chime press Ces the display should look like this Press to exit the menu and
45. lect that option press Qes Press to exit the User menu and return to normal pA If no keys are pressed the display will return to normal after the Menu Time Out timer has expired View the Event Log The control panel has two Event Logs which are time and date stamped The first log which is a system log records all events that occur on the system i e Users entering their codes to arm or disarm areas alarm events failures to arm etc and the second log which is an alarm log only records alarm events that occur on the system Users with access to this option can view the Event Log to see what events occurred on the system and when they occurred When viewing the system log there are 8 hotkeys available These hotkeys allow certain events to be found easier without the need for searching see page 19 for details gt To view the Event Log proceed as follows Enter a valid User code 20 06 0 the display should look like this Press Qem the display should look like this Press Yes the display should look like this Press Qes the display should look like this Press 1 gt for the System Log for the Alarm Log the display will look something like this Press C to scroll up down through the Log pA The down key moves you to the previous event backwards in time and the up key moves you forwards again Use keys GD Gf Grime to search for specific events see
46. m Premier 888 amp 8168 User Manual Quick Arm Keys The Quick keys allow the system to be armed without having to enter a User code first 2 The Quick keys will only work if the keypad has been programmed to allow arming in this way Quick Arm To arm the system press pA All areas that the keypad being used is assigned to will now Arm Quick Part Arm part arm the system press 2 All areas that the keypad being used is assigned to will now Part Arm Reset and Service Messages When the system requires attention because of a potential problem the display will show one of three service messages These messages can also be accessed at any time allowing the user to view installer information 2 These messages would normally be programmed with the telephone numbers of the installer or the Alarm Receiving Centre gt display the service messages proceed as follows The display will normally show the time amp date Press Gens followed by G gt for the Reset message the display will look something like this Press followed by lt for the Anti code message the display will look something like this Press Meny followed by G for the Service message the display will look something like this 2 Press eset to exit from the message the display will then return to normal Fault Messages There is a Mains failure the keypad may chime ever
47. m the System gt To part arm the system proceed as follows Ensure that the premises are secure all windows and doors not being omitted are closed and the Ready light is on To do a quick part arm press Car Or Enter a valid User code 2202 20 06 0 the display should look like this Press Cran the display will look something like this Use keys 1 to select the required part arm or area suite the display will look something like this PURE pA The bottom line of the display is programmable for each Part Arm The top line of the display is programmable for each Area suite When the required part arm or area suite has been selected press Qes the exit tone will sound if silent arm has not been selected and the display will look something like this Leave the protected area When the system has armed the exit tone if sounding will stop and the display will look something like this The system is now part armed INS177 Premier 888 amp 8168 User Manual The Arming Menu To Silent Arm the System silent arm the system proceed as follows Ensure that the premises are secure all doors and windows closed etc and the Ready light is on Enter a valid User code 220220 026 0 the display should look like this Press C until the display looks like this Press to arm the system Or Press fan to part arm the system Continue to arm as normal T
48. mal 22 INS177 Premier 888 amp 8168 User Manual The User Menu Set System Date The alarm system has a real time clock that is used to date and time stamp events that are recorded within the system Log Users with access to this option will be able to set the Time on your alarm system gt change User code proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press C until the display looks like this Press Ces the display will look something like this Enter the new date 9 DM CW C gt the display will look something like this Press Yes the display should look like this Press to exit the menu and return to normal Change Timers The system has 8 control timers that may have been programmed to activate outputs arm areas or lockout users at different times of the day Users with access to this option can turn the 8 control timers on and off manually if required gt To turn the control timers on amp off proceed as follows Enter a valid User code IQ 20 IQ gt the display should look like this Press the display should look like this Press Yes the display should look like this Press C until the display looks like this Press Yes the display will look something like this Use keys 1 gt to turn s
49. mething like this 2 To reset the activity counter press Cesa Press Gen when finished the display should look like this Press to exit the menu and return to normal 16 INS177 Premier 888 amp 8168 User Manual The User Menu 4 The User Menu Accessing the User Menu Advanced operations of the system are carried out using the User Menu i e System Tests Assigning Users etc cS Not all options are available to all users If an option cannot be selected it may be that it is not assigned to that user See page 26 for details The table below shows the various options available User Menu Key Option Page lt gt View System Log 17 lt gt Change Code 20 lt gt Edit Chime Zones 20 System Tests 21 lt gt Walk Test 21 lt gt Enable Engineer 22 E gt Set System Time 22 lt gt Set System Date 23 lt gt Change Timers 23 lt Change Ctl Times 24 lt gt Setup Users 25 lt gt Alter Part Zones 30 lt gt Remote PC 30 gt access the User menu proceed as follows The display will normally show the time amp date 2 The top line of the display is programmable Enter a valid User code QDD QDD the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press C until the required option is displayed to se
50. o Cancel the Exit Mode gt cancel the exit mode proceed as follows The display will look something like this Enter a valid User code D D _ _ the display should look like this Press Cs the exit tone will stop and the display will look something like this The exit mode has now been cancelled To Disarm the System During Entry gt disarm the system proceed as follows Enter the premises via the designated entry point the entry tone will start and the display will look something like this Enter a valid User code 22020200206 0 the entry tone will stop and the display will look something like this The system is now disarmed pA If the entry time expires an Internal alarm will occur for the duration of the 274 Entry Delay If the 274 Entry Delay expires an Intruder alarm will occur all internal and external sounders To Disarm the System When Not in Entry gt disarm the system proceed as follows The display will look something like this Enter a valid User code D 20 IQ gt the display should look like this Press Qes the display will look something like this The system is now disarmed INS177 The Arming Menu Premier 888 amp 8168 User Manual Arming and Disarming Areas An area is Armed when ALL zones within that area are ON not omitted An area is Part Armed when SOME zones within that area are ON not omitted and some zones within that
51. only be disarmed from a keypad assigned to the same areas Areas assigned to the selected user can be disarmed from any keypad on the system Silent Arm Areas assigned to the selected user can be armed silently see page 9 for details Areas assigned to the selected user cannot be armed silently Disarm First If areas are already armed and the selected user enters their code the Disarm option is displayed If areas are already armed and the selected user enters their code the Arm option is displayed User Menu The selected user has access to the User menu However the selected user will only have access to options assigned in User Config see page 28 for details The selected user will not have access to any of the options in User Config 10 Yes No 11 Yes No 12 Yes No 13 Yes No 14 Yes No 15 Yes No 16 Yes No Eng Program Engineers only The selected user can access the Engineer Programming mode This option should NEVER be enabled for normal users as it will allow the programming of the system to be altered to such a degree that the system may fail to operate The selected user cannot access the Engineer Programming menu Dual Code The selected user can only access an area when a second User code with the Dual Code attribute and also assigned to the same area is entered Dual Code users will also activate th
52. page 19 for details Press to toggle the display between the area information and the time date the display will look something like this Press Men when finished the display should look like this Press to exit the menu and return to normal 2 For a full list of Log Events and their descriptions please see next page INS177 17 The User Menu Premier 888 amp 8168 User Manual Event Log Descriptions Log Event Description KSW Active A Keyswitch zone type has been activated zone number RKP MEDICAL A Medical alarm 7 amp 9 has occurred from keypad number RKP FIRE A Fire alarm 4 amp 6 has occurred from keypad number RKP AUD PA An Audible PA alarm 1 amp 3 has occurred from keypad number RKP SIL PA A Silent PA alarm 1 amp 3 has occurred from keypad number DURESS User has entered a Duress Code at a keypad ALARM Active An Intruder alarm signal has been activated for area BELL Active The Bell output has been activated for area REARM LOCK Zone has re armed after causing an alarm CROSS A Verified Cross Zone Alarm has occurred from zone USER User has entered their code AREAS EXIT The Exit mode has been started for area ARMING FAILED A Exit Error Arm Fail has occurred on area AREAS ENTRY The Entry mode has been started for area
53. pecific timers on and off i e Timer 1 the display will look something like this Press Qes the display should look like this Press to exit the menu and return to normal INS177 23 The User Menu Premier 888 amp 8168 User Manual Change Ctl Times The system has 8 control timers Each timer has two ON and OFF times and can be programmed to operate on any days of the week Once configured the timers can be used to automatically arm or disarm areas lockout User codes and control outputs etc Users with access to this option can program the 8 control timers gt To program control timers proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press C until the display looks like this Press Yes the display should look like this Select a Control Timer from 1 to 8 by pressing to search the display should look like this Enter the timers first required On time 24Hr format the display will look something like this Press Qes to program the timers On days the display will look something like this Use keys GD 7 0 to select the timers On days SUN to SAT i e 1 2 and Sunday and Monday the display will look something like this Press to program the timers first Off time the display will look something like this En
54. rn to normal 14 INS177 Premier 888 amp 8168 User Manual The Arming Menu Omit 24Hr Zones It is possible to exclude omit or include 24Hr zones whilst the system is disarmed to allow access to an area Users with access to this function can only omit zones that have been programmed as Omittable gt To omit 24Hr zones proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press until the display looks like this Press Yes the display will look something like this Enter zone number CQD 2 2 or use the key to search the display will look something like this 2 If the zone can be omitted there will be Star to the right of the zone number Only zones that have the Omit attribute assigned to them can be omitted Press to omit the selected zone the display will look something like this 2 A Star will appear to the left of the zone number to indicate that the zone has been selected for omitting Repeat for other zones When all the required zones have been selected for omitting press the display should look like this Press Ces the display will look something like this The selected 24Hr zones are now omitted Reinstate 24Hr Zones To reinstate the omitted zones simply follow the instructions again However when the key is pressed the display will look something like this Set Chime Areas W
55. s secure and the system is ready to be armed e f the Ready light is flashing then the system has zones with the Force Omit attribute that are active check these zones before proceeding e If the Ready light is off then one or more zones active either secure or omit these zones before proceeding INS177 The Arming Menu Premier 888 amp 8168 User Manual Arming and Disarming the System The system is Armed when ALL areas that are controlled by the User code have been armed with ALL zones ON not omitted The system is Part Armed when ALL areas that are controlled by the User code have been armed with SOME zones OFF omitted or SOME areas controlled by the User code have not been armed cS The system is only Part Armed when zones are omitted using the Part Arm 1 2 or 3 procedure Omitting zones manually see page 14 for details is not classed as Part Arming To Arm the System gt arm the system proceed as follows Ensure that the premises are secure all doors and windows closed etc and the Ready light is on To do a quick arm press Grea Or Enter a valid User code D _ _ the display should look like this Press Yes the exit tone will sound if silent arm has not been selected and the display will look something like this Leave the premises when the system has armed the exit tone will stop if sounding The system is now armed To Part Ar
56. s only permitted for 4 Hours after it is enabled after which it will automatically be disabled again gt enable Engineer access proceed as follows Enter a valid User code IQ D _ _ the display should look like this Press Gens the display should look like this Press Yes the display should look like this Press C until the display looks like this Press Ces the display will look something like this Press to enable disable Engineer access the display will look something like this Press Yes the display should look like this Press to exit the menu and return to normal Set System Time The alarm system has a real time clock that is used to date and time stamp events that are recorded within the system Log Users with access to this option will be able to set the Time on your alarm system gt Tosetthe system time proceed as follows Enter a valid User code IQ 20 06 gt the display should look like this Press Qem the display should look like this Press Qes the display should look like this Press C until the display looks like this Press Qes the display will look something like this Enter the new time 24 Hour format GH GH M M gt the display will look something like this Press to change between BST and GMT the display will look something like this Press Yes the display should look like this Press to exit the menu and return to nor
57. s part of the protected premises and may consist of one or more detection devices protecting rooms and points of entry exit e g front door kitchen downstairs windows upstairs bedrooms etc When the alarm system is fully armed all of the zones on the system are monitored Some zones may belong to more than one area such as points of entry exit i e the front door and the hallway These are called global zones because they are assigned to multiple areas Global Zones A zone that is assigned to more than one area will only be monitored when all of the areas it is assigned to are armed Areas An area is a group of one or more zones and would normally be used to split the premises into different sections Each area can be either Full armed or Part armed Example 1 Domestic Premises The upstairs of a house could be area A the downstairs could be area B and the garage could be area C Each area can be Full armed independently from each other all detection devices in the area monitored For instance downstairs and the garage in example 1 areas B amp C could be armed at night allowing access to the upstairs of the house area A 2 All of the areas together form the entire alarm system Example 2 Domestic Premises The entire house could be area A Each area can be Part armed For instance detection devices upstairs i e PIR s could be programmed so that they will not be monitore
58. ter a valid User code GIGI 11 Use the Scroll key to find Silent Arm then press Area then Select areas using keys 1 8 then press Yes 2 2 then Ces Clearing an Arm Fail Enter a valid User code DDD 12 Press Reset Silencing an Alarm Enter a valid User code LOLOTO 12 User Reset Press Reset 13 Engineer Reset Contact the Installation Company 13 Anti Code Reset Contact the Alarm Receiving Centre and quote the 4 digit code that appears on the display Enter the code that is given by the Alarm Receiving Centre Press Yes OOOO ODO Omit Zones Enter a valid User code Press Omit Select zones using keys 0 9 Press Omit to select the zone for omitting Press Menu and continue to arm as normal DODO View Zone Status Omit 24Hr Zones Enter a valid User code Use the Scroll key to find View Zone Status then press Yes Select the required zones using keys 0 9 Enter a valid User code Use the Scroll key to find Omit 24Hr Zones then press Yes Select the required zones using keys 0 9 Press Omit to select the zone for omitting Press Yes the zones are now omitted DL then DDD then Set Chime Areas Enter a valid User code Use the Scroll key to find Chime Areas then press Yes Select the required areas using keys 1 8 Press Yes when finished then a Turn Chime On Press Chime Turn Chime Off Press Chime INS177 33
59. ter the timers required Off time 24hr format GH M M the display will look something like this Press Qes to select the timers Off days the display will look something like this Use keys 1 Q to select the first On days SUN to SAT i e and Friday and Saturday the display will look something like this Press Qes the display will look something like this 2 Program the timers Second On times On days Off times and Off days exactly the same as the timers First On times On days Off times and Off days Press Gens the display should look like this Press to exit the menu and return to normal 24 INS177 Premier 888 amp 8168 User Manual The User Menu Setup Users This section covers the alteration of existing users and the addition of new users to the system The Premier 888 can be assigned up to 49 users plus Engineer and the Premier 8168 can be assigned up to 99 users plus Engineer Default User Codes When the control panel is first powered up and the factory default settings are loaded only the Engineer code and the Master User code exist The factory default Master User code is Gu Ge Ge Bu cy The Master User is always User 01 If the Master User code has been lost or forgotten it can be reprogrammed by the Engineer Assigning New Users Before assigning new users to the system the following should be decided e Which User number they will be assigned to e
60. this Continue to arm the system area as normal see page 8 or 10 for details The selected zones are now omitted 2 All omitted zones will be automatically reinstated the next time the system area is disarmed unless programmed otherwise Re instating Zones Manually If the system has been programmed for zones to be re instated manually simply follow the instructions again However when the key is pressed the display will look something like this View Zone Status Users with access to this feature will be able to check the status of each zone on the system to see whether it is in Fault Secure Tamper or Shorted gt view the status of zones proceed as follows Enter a valid User code D 006 gt the display should look like this Press C until the display looks like this Press Ces the display will look something like this Enter the zone number CDD CD or use the CS key to search the display will look something like this pA Pressing will make the zone chime every time it is activated an Arrow will appear to the right of the zone number to clear the chime press again Pressing will display the zone text Every time the selected zone is activated its status will be displayed and the keypad will chime if selected the display will also look something like this Press Yes when finished the display should look like this Press to exit the menu and retu
61. y minute enter a valid User code to stop the chime The display will automatically clear when mains is reapplied There is a Phone Line fault the keypad may chime every minute enter a valid User code to stop the chime The display will automatically clear when line fault clears Zones that have been placed on test by the engineer have failed the test the system can still be used Contact your alarm company to advise There is a fault with the standby battery the keypad may chime every minute enter a valid User code to stop the chime Contact your alarm company immediately There is a tamper fault the alarm will sound enter a valid User code to silence the alarm this fault cannot be cleared Contact your alarm company immediately A fuse has blown the alarm will sound enter a valid User code to silence the alarm this fault cannot be cleared Contact your alarm company immediately Other Messages The alarm engineer has logged into the programming menu and is working on site this message will clear when the engineer logs off or the system is armed Too many invalid code attempts have caused the keypad to lock out The keypad will remain like this for 5 minutes The keypad has been disabled to prevent unauthorised access The display will automatically clear when the keypad is enabled Areas are being armed using one of the control timers enter a valid User code to defer the arming for 30 minutes
Download Pdf Manuals
Related Search