Manual book for Smart lighting device SH-D2
Contents
1. A Lo hal lt 3 4 E EN PR A MANUAL BOOK SMART LIGHTING DEVICE Model SH De SmartHome technology development investment company limited www smarthome com vn Mfr Code 893604393 HDD2 Copyright O 2012 SmartHome Co Ltd All rights reserved HDD2 0212 V2 0 SMART LIGHTING DEVICE Model SH D2 The high class house User Manual SH D2 Thank you for choosing smart lighting device SH D2 of SmartHome For selecting SmartHome s products you will enjoy the best warranty services and installation support from our technical experts This document contains useful information during installation process and product usage Please read the instructions carefully and retain the manual in case of need Electric shock may cause injuries or death Before installing repairing or cleaning the device you should check whether the device s power is disconnected You should request support from technical experts or Customer Warning Contact Center to avoid electric related accidents You should comply with environmental regulations when discarding or recycling the device or its packing materials SmartHome 1 User Manual SH D2 Copyright 2012 SmartHome Co Ltd All rights reserved The smart lighting SH D1 is the product of SmartHome Company and has been registered regarding designs utility solutions and quality cert2. e Ifthe indicator light is continuously on The device is in continuous lighting mode e If the indicator light is off the device is turned off by switch or there is no user in its sensor area e If the indicator light flashes every 1 second the device is booting SmartHome 12 Installation SH D2 Installation 1 Device s default settings Mode Default value Actual settings Light sensor Off Forcible turn off 8 hours automatic turn off after 10 minutes forcible turn off after 8 hours Automatic turn on 10 minutes Switch type Ordinary switch 2 Switch mode setting adjusting switch S203 Using pressing switch mode Using normal switch default SmartHome 13 Installation SH D2 3 Light time Setting Forcible light turn off Automatic light turn on Forcible light turn off Automatic light turn on 30 minutes after 10 seconds 45 minutes after 60 seconds Forcible light turn off Automatic light turn on Forcible light turn off Automatic light turn on 60 minutes after 3 minutes 90 minutes after 5 minutes SmartHome 14 Installation SH D2 Forcible light turn off Automatic light turn on Forcible light turn off Automatic light turn on 2 hours after 10 minutes 4 hours after 15 minutes Forcible light turn off Automatic light turn on Forcible light turn off utomatic light turn on 6 hours after 30 minutes 8 hours after 60 minutes N Adj
3. 38mm 90 gram SmartHome Features SH D2 Features Components Sensor C Vel 123 DO EE x EEE Turn off or turn on light sensor Adjust automatic turn off time when there is no user Select switch type Test mode Adjust the light turn off time for technicians only by switch SmartHome 9 Features SH D2 1 Smart lighting The smart lighting device automatically turns on upon detecting people in sensor area When users leave the sensor area the device will turn off after a preset period The preset period for turning off can be set from 10 seconds to 60 minutes by switch S201 If preset time is too short high switching frequency will shorten the life of fluorescent lamps compacts Notice Forcible lighting 201 switch for adjusting sensor time The device can be connected to switch to adjust lighting modes according for users diversity needs Turn off the light When the light is on using switch to turn off the light the light will be off for a preset amount of time After the period the device will automatically turn on the light upon 5202 switch for adjusting detecting a user s presence The turn off time is the forcible turn off time set by 202 10 SmartHome Features SH D2 e Turn on the light When the light is off using switch to turn on the light the device will turn on and automatical
4. ification All violations such as copying designs and product ideas are subject to the current copyright laws of the Socialist Republic of Vietnam SmartHome 2 User Manual SH D2 Safety Information Do not use power source which is different from the one stated in 11 Hy the specifications of the device Disconnect its power prior to installing disassembling or repairing R2Y lt the device Do not store the device in high temperature environ Do not disassemble the device if not necessary Do not clean the device with corrosive chemicals Comply with the safety information during the device s usage POD O Smarthome 3 User Manual SH D2 Contents introductio 1 PR ER ces dee ee neces abii 05 1 General introduction 2 05 2 Product package 2 06 5 SENSOL APSA acercan aseecee 07 4 Specifications 2 elle eeecccececcccecces 07 ES elotes late 09 A AA 10 2 Forcible lighting 2 10 A SENSOR E cece ese A E AA A E 11 4 Setting preferred light level 2 12 OO e Enae 12 SS E 13 As AS a 13 2 Switch mode setting 2 lili 13 SE EEEE REE a 14 Sa ao E AAEN EE UAAR REENE 17 1 Connection Scheme iii 18 2 Installation steps 2 2222 eee eee eee eee eee eee ees 19 Problems during usage occ cocos 21 SmartHome 4 Introduction SH D2 Introduction General introduction Smart lighting device operates using infrared tem
5. ion SH D2 Step 3 Mount the device to the hook to fix it onto the ceiling Figure 3 amp 4 All wires cords mentioned in Step 2 should be connected properly to A avoid damage to the device During installation the sensor surface should be kept from being Warning scratched which may affect the sensor s sensitivity SmartHome 20 Problems during usage SH D2 Problems during usage The following cases are not caused by device s error Lights turn off when there is no user s motion in the room Lights do not turn on when there is enough light in the room SmartHome 21 Problems during usage SH D2 The following cases are not caused by device s error Lights turn on due to the impact of air conditioning or heat sources cooker microwave stove etc Lights turn on due to moving objects SmartHome 22 Problems during usage SH D2 The following cases are not caused by device s error Lights turn on due to nearby powerful transmitting equipment Lights turn on due to a nearby steam fan SmartHome 23 Problems during usage Number Phenomenon SH D2 Solution 1 The device does not operate indicator light does not flash when there is a user in sensor area Use switch to turn on and off the light if the device does not operate please check the power connectio
6. ly turn off the light when users get out of the sensor area after the automatic turn off time refer to time setting on page 14 Continuous lighting mode Switch on and off 3 times consecutively in 2 seconds or press and hold the button for more than 3 seconds the light will be continuously on If users would like to turn off the light use the switch to turn off 3 Light sensor Light sensor helps the device s operation to be smarter and more power saving When using light sensor mode the device automatically turns on only when actual light condition is darker than the preset one Enable or disable this mode by S203 switch is shown as follow Not using light sensor Using light sensor SmartHome 11 Features SH D2 4 Adjust preferred light level For the preferred light level setting please take the following steps e Wait for the environment light to reach the preferred level to turn on the light e Switch on and off 5 times consecutively in 3 seconds or hold the press for more than 10 seconds so that the device records the new reference light level The device is set up with default preferred light level setting However users can set up the parameter again if the default setting is not suitable 5 Indicator light Indicator light is used to inform the device s status e If indicator light flashes every 0 5 seconds when users are in sensor area The device is operating in automatic lighting mode
7. n lf you cannot solve the problem please contact Customer Contact Center The indicator light is on upon detecting user but the light is not on The lighting device flashes continuously SmartHome Use switch to turn on the light if the light is not on please check whether the light bulb is broken If you cannot solve the contact Customer problem please Contact Center Use switch to turn off the light if you cannot solve the problem please contact Customer Contact Center 24 Problems during usage SH D2 Number Phenomenon Solution 4 The device only The device has been installed in operates in the dark environment light mode To disable this mode refer to light sensor mode setting page 11 Contact Customer Care Center for more details about products Customer Care Center 1900 6632 SmartHome 25
8. perature sensing technology When users are in the sensor area the light will automatically turn on The device is integrated with the light sensor and the ability to flexibly adjust the pending time to turn off the light when users leave the sensor area The product s smart feature brings comfort power saving and absolute safety to ts users The device is suitable for Office smart house e Living room bed room kitchen dining room e Restroom stair corridor courtyard garage stockroom SmartHome 5 Introduction SH D2 Product package Manual book MANUAL BOOK SMART LIGHTING DEVICE Model SH D2 SmartHome technology development investment company limited SH D2 Sets of ceiling hook screws and anchors 6 SmartHome Introduction SH D2 Sensor area Above the ceiling Below the ceiling N The above dimensions are the best for the device s detection ability to a detect users moving into its sensor area In case the device fails to Notice detect users please contact our Customer Contact Center SmartHome 7 Introduction SF D2 Voltage Load power Sensor range Applicable sensor area Light sensor mode Operation temperature Dimensions D X H Weight 220VAC 50 60Hz Incandescent lamp maximum 1000W Fluorescent lamp maximum 350W Maximum 5m Maximum 20m2 Light sensor mode 0 C 50 C 90 x 90 x
9. usting the forcible light turn off time S202 does not affect the Notice automatic light turn on time S201 and vice versa SmartHome 15 Installation SH D2 Difference between normal switch and pressing switch e Normal switch is the type of switch mounted on electric panel to turn on and off the light Its status does not change after interactions of switching e Pressing switch is the type of button commonly used with doorbell It will automatically revert to its previous status after interactions of switching SmartHome 16 Installation SH D2 Installation The back of the device Input Hot wire Neutral wire Switch SmartHome 17 Installation SH D2 1 Connection Scheme Connection diagram with switch Neutral wire Hot wire Switch Sensor The light can be replaced by other indicator devices based on users demand bell fan alarm device etc Notice SmartHome 18 Installation SH D2 Installation steps Step 1 Drill two screw holes to mount the hook onto the ceiling Notice avoid underground wire upon drilling as in Figure 1 Step 2 Connect the supply cord light wire and switch wire to corresponding power connector light switch of the device Figure 2 Power cord Light wire and switch wire SmartHome 19 Installat
Download Pdf Manuals
Related Search