sop10. toilet door handle
Contents
1. surface removing all residue from the surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRI X TRAI NI NG amp SUPPORT b gt Matrix eoe Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix eee Cleaning Systems2. Custody Cells Steam Operating Procedures SOP10 TOILET DOOR HANDLE STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as Instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTI NG UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Steam Clean and scrub door handle contact area Remove the short steam lance from the hose being careful as this will be hot Fit the floor brush squeegee insert into the floor brush nozzle connect the floor brush nozzle to the extension tube ensuring you lock the clip into position Now using the steam and vacuum together clean over this area to generate a dry and sanitised
Download Pdf Manuals
Related Search