GOT-5840T-830
Contents
1. Enabled AMI BIOS Setup Utility GOT 5840T User s Manual 3 8 Chipset Menu The Chipset menu allows users to change the advanced chipset settings You can select any of the items in the left frame of the screen to go to the sub menus North Bridge Configuration South Bridge Configuration For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY gt North Bridge Configuration AMI BIOS Setup Utility 51 GOT 5840T User s Manual e North Bridge Configuration BIOS SETUP UTILITY DRAM Frequency Auto gt DRAM Frequency This item allows you to control the Memory Clock gt Configure DRAM Timing by SPD This item can enable or disable DRAM timing by SPD Serial Presence Detect device which is a small EEPROM chip on the memory module containing important information about the module speed size addressing mode and various parameters gt Boot Graphic Adapter Priority This item allows you to select the graphics controller as the primary boot device gt Internal Graphics Mode Select This item allows you to select the amount of system memory used by the internal graphics device gt Video Function Configuration Press lt Enter gt for the sub menu for setting up video function 52 AMI BIOS Setup Utility GOT 5840T User s Manual BIOS SETUP UTILITY DUMT Mode Select DUMT Model AMI BIOS Setup Utility 53 GOT 5840T User s Manual e Sout2. WA x IOMTEK GOT 5840T 830 All in One 8 4 SVGA TFT Fanless Touch Panel Computer with Intel Atom N270 Processor Onboard User s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information AXIOMTEK Co Ltd assumes no responsibility for any infringements of patents or any third party s rights and any liability arising from such use AXIOMTEK does not warrant or assume any legal liability or responsibility for the accuracy completeness or usefulness of any information in this document AXIOMTEK does not make any commitment to update the information in this manual AXIOMTEK reserves the right to change or revise this document and or product at any time without notice No part of this document may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of AXIOMTEK Co Ltd Copyright 2009 AXIOMTEK Co Ltd All Rights Reserved August 2009 Version A2 Printed in Taiwan Safety Approvals CE Marking FCC Class FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are meant to provide reasonable protection against harmful interference in a residential installation If not installed and used in accordance with proper instr
3. hard disk drive enters after the specified period of hard drive inactivity has expired The default setting is Suspend Disabled This setting prevents hard disk drive power down mode This option cuts the power to the hard disk drives during a system suspend This is the default setting gt Suspend Time Out Minute This option specifies the length of time the system waits before it enters suspend mode The default setting is Disabled 5 This setting prevents the system from entering suspend mode after being inactive for 1 minute Set this item to allow the computer system to enter suspend mode after being inactive for 10 minutes Set this item to allow the computer system to enter suspend mode after being inactive for 4 minutes gt Throttle Slow Clock Ratio Use this item to specify the speed of the system clock when running the power saving states gt Power Button Mode This option specifies how the externally mounted power AMI BIOS Setup Utility 35 GOT 5840T User s Manual button on the front of the computer chassis is used The default setting is On Off Pushing the power button turns the computer On Off on or off This is the default setting This is the default setting Pushing the power button places the computer in Suspend mode or Full On power mode Advanced Resume Event Controls gt Resume On Ring This item enables or disables the function of Resume On Ring that resumes the sys
4. 9 2 1 CF card Installation 9 2 2 Serial Ports Interface 11 2 3 oloni ila 13 2 4 Mountings Panel Wall Desktop VESA 14 2 4 1 Panel Mounting eese 14 2 4 2 Wall Mounting eene 15 2 4 8 Desktop Mounting 0 16 2 4 4 VESA ARM Mounting eee 18 2 5 DRAM Installation 20 2 6 Wireless LAN Card Installation 22 CHAPTER 3 AMI BIOS SETUP UTLLITY 25 3 1 Sici E 25 3 2 Navigation 25 3 3 Main MENU 26 3 4 Advanced MENU 27 3 5 PCI PnP MENU 41 3 6 Boot donde me Eee det 44 3 7 Security 49 3 8 Chipset a a 51 3 9 ua Sn ook cde data de anaes 56 CHAPTER 4 DRIVERS INSTALLATION 58 4 1 58 vi 4 2 4 2 1 4 2 2 4 3 4 3 1 4 3 2 TouclhiSereetz 59 fonia iaia 59 Driver Installation Windows XP 59 Embedded OS 5 talea 62 Windows XP Embedded 62 Windows CE NET 6 0 63 vii MEMO viii GOT 5840T User s Manual CHAPTER 1 INTRODUCTION Th
5. Password This item indicates whether a supervisor password has been set If the password has been installed Installed displays If not Not Installed displays gt User Password This item indicates whether a user password has been set If the password has been installed Installed displays If not Not Installed displays gt Change Supervisor Password Select this option and press lt Enter gt to access the sub menu You can use the sub menu to change the supervisor password gt Change User Password Select this option and press lt Enter gt to access the sub AMI BIOS Setup Utility 49 GOT 5840T User s Manual 50 menu You can use the sub menu to change the user password gt Boot Sector Virus Protection This option is near the bottom of the Security Setup screen The default setting is Disabled Protection This is the default setting Select Enabled to enable boot sector protection It displays a warning when any program or virus issues a Disk Format command or attempts to write to the boot sector of the hard disk drive If enabled the following appears when a write is attempted to the boot sector You may have to type N several times to prevent the boot sector write Boot Sector Write Possible VIRUS Continue Y N _ The following appears after any attempt to format any cylinder head or sector of any hard disk drive via the BIOS INT 13 Hard disk drive Service Format Possible VIRUS Continue Y N
6. Select Discard Changes and Exit from the Exit menu and press lt Enter gt Select Ok to discard changes and exit gt Discard Changes 56 AMI BIOS Setup Utility GOT 5840T User s Manual Use this item to abandon all changes gt Load Optimal Defaults It automatically sets all Setup options to a complete set of default settings when you select this option The Optimal settings are designed for maximum system performance but may not work best for all computer applications In particular do not use the Optimal Setup options if your computer is experiencing system configuration problems Select Load Optimal Defaults from the Exit menu and press lt Enter gt gt Load Fail Safe Defaults It automatically sets all Setup options to a complete set of default settings when you select this option The Fail Safe settings are designed for maximum system stability but not maximum performance Select the Fail Safe Setup options if your computer is experiencing system configuration problems Select Load Fail Safe Defaults from the Exit menu and press lt Enter gt Select Ok to load Fail Safe defaults AMI BIOS Setup Utility 57 GOT 5840T User s Manual CHAPTER 4 DRIVERS INSTALLATION 41 System GOT 5840T 830 supports Windows 2000 XP To facilitate the installation of system driver please carefully read the instructions in this chapter before start installing 1 Insert Driver CD and select the Drivers bp gp S
7. The Up and Down lt Arrow gt keys allow you to select a setup screen or sub screen N The Plus and Minus lt Arrow gt keys allow you to Plus Minus change the field value of a particular setup item Tab The lt Tab gt key allows you to select setup fields The lt F1 gt key allows you to display the General Help screen AMI BIOS Setup Ulility 25 GOT 5840T User s Manual The lt F10 gt key allows you to save any changes you have made and exit Setup Press the lt F10 gt key to save your changes The lt Esc gt key allows you to discard any changes you have made and exit the Setup Press the lt Esc gt key to exit the setup without saving your changes The lt Enter gt key allows you to display or change the setup option listed for a particular setup item The lt Enter gt key can also allow you to display the setup sub screens 3 3 Main Menu When you first enter the Setup Utility you will enter the Main setup screen You can always return to the Main setup screen by selecting the Main tab There are two Main Setup options They are described in this section The Main BIOS Setup screen is shown below BIOS SETUP UTILITY System Time e System Time Date Use this option to change the system time and date Highlight 26 AMI BIOS Setup Utility GOT 5840T User s Manual System Time or System Date using the lt Arrow gt keys Enter new values through the keyboard Press the lt Tab gt key o
8. chassis for a few seconds This will help to discharge any static electricity on your body When handling boards and components wear a wrist grounding strap available from most electronic component stores Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co Ltd IBM PC AT PS 2 VGA are trademarks of International Business Machines Corporation Intel and Atom are registered trademarks of Intel Corporation MS DOS Microsoft C and Quick BASIC are trademarks of Microsoft Corporation VIA is a trademark of VIA Technologies Inc SST is a trademark of Silicon Storage Technology Inc UMC is a trademark of United Microelectronics Corporation Other brand names and trademarks are the properties and registered brands of their respective owners Table of Contents Disclaimers eese neret tnn ii Safety Approvals nene cn e de denis iii Safety Precauliolis ete ree ie bet e Ee ie iS iv CHAPTER 1 INTRODUCTION l u 1 1 1 General Description a 1 1 2 SpecificatiONS iii 2 1 2 4 CPU Board needs 2 1 22 MOXSySIGITI ee tc eR e ee e ds 3 1 2 3 System Specification 3 1 3 DIMENSIONS 5 1 4 VO Outlets sieeve irent ia Aia 7 1 5 Packing List J0 tate piede na 8 CHAPTER 2 HARDWARE INSTALLATION
9. notice SR NOTE If the operation temperature is higher than 35 C the wide temperature DRAM and HDD are recommended to be used on the device 4 Introduction GOT 5840T User s Manual 1 3 Dimensions This diagram shows you dimensions and outlines of the GOT 5840T 830 234 00 Introduction 5 GOT 5840T User s Manual ATH HUD 6 Introduction GOT 5840T User s Manual 1 4 IO Outlets Please refer to the following illustration for I O locations of the GOT 5840T 830 POWER SWITCH ATX Power Input connector phoenix type Power Input connector screw type COM 2 RS 232 1 2 2 1 3 4 5 7 EN 3 0 1 85 29242248 S 5 EM HE NEN Introduction 7 GOT 5840T User s Manual 1 5 Packing List When you receive the GOT 5840T 830 the bundled package should contain the following items GOT 5840T 830 x 1 Panel Mount Kit x 6 Driver CD x1 Wall Mount Kit x1 Desktop Stand Kit optional VESA ARM optional Power Adapter amp power cord for GOT 5840T 830 J If you can not find the package or any items are missing please contact AXIOMTEK distributors immediately 8 Introduction GOT 5840T User s Manual CHAPTER 2 HARDWARE INSTALLATION The GOT 5840T 830 provides rich I O ports and flexible expansions for you to meet different demand for example CF card The chapt
10. screen to select options for the APM Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Power Management APM Enabled 34 gt Power Management APM Set this item to allow Power Management APM support The default setting is Enabled Set this item to prevent the chipset power management and APM Advanced Power Management features Set this item to allow the chipset power management and APM Advanced Power Management features This is the default setting gt Video Power Down Mode This option specifies the Power State that the video subsystem enters when the BIOS places it in a power saving state after the specified period of display inactivity has AMI BIOS Setup Utility GOT 5840T User s Manual expired The default setting is Suspend This setting prevents the BIOS from initiating Disabled any power saving modes concerned with the video display or monitor This option places the monitor into suspend mode after the specified period of display inactivity has expired This means the monitor is not off The screen will appear blacked out The standards do not cite specific power ratings because they vary from monitor to monitor but this setting use less power than Standby mode This is the default setting gt Disk Drive Power Down Mode This option specifies the power conserving state that the
11. 0 is equipped with a high performance Plug and Play Ethernet interface full compliant with IEEE 802 3 standard and be connected with a 45 LAN connector Please refer to detailed pin assignment list below 1 TX Data transmission positive TX Data transmission negative Rx Data reception positive 6 Rx Data reception negative 8 RJ45 termination Hardware Installation 13 GOT 5840T User s Manual 2 4 Mountings Panel Wall Desktop VESA There are several mounting ways for the GOT 5840T 830 Panel Wall Desktop and VESA mountings 2 4 1 Panel Mounting The GOT 5840T 830 is designed for panel mount application A set of standard mounting kit are bundled with the system package that you can use it to mount the GOT 5840T 830 14 Hardware Installation GOT 5840T User s Manual 2 4 2 Wall Mounting The GOT 5840T 830 is designed for Wall mounting application Please refer to the following steps Find out the screws as marked on the back side of chassis Hardware Installation 15 GOT 5840T User s Manual 2 4 3 Desktop Mounting The GOT 5840T 830 is designed for desktop mounting application Please refer to the following steps Step 1 Find out the screws as marked on the back side of chassis 16 Hardware Installation GOT 5840T User s Manual Step 2 Assemble the desktop stand to the chassis and fix the screws Hardware Instal
12. be used in different industrial environments The front bezel meets the IP65 NEMA4 standard For connecting other devices the GOT 5840T 830 also features several interfaces USB Ethernet and RS 232 422 485 1 2 Specifications 1 2 1 Main CPU Board CPU m Intel Atom 270 1 6GHz processor with FSB 533MHz onboard System Chipset m 945GSE ICH7M BIOS America Megatrends BIOS System Memory One 200 pin DDR2 SO DIMM socket Maximum memory up to 2GB Introduction GOT 5840T User s Manual 1 2 2 I O System Standard I O m One RS 232 and RS 232 422 485 m Two USB 2 0 Ethernet One RTL81111b Gigabit Ethernet Audio m One Line out Expansion m One Mini card Storage m One socket for CF card Power connector GOT 5840T 830 10VDC to 30VDC with phoenix power connector GOT 5840T 830 J External 60W AC Adapter with screw type connector 1 2 3 System Specification 8 4 TFT LCD Heat Dispensing Design Net Weight m 1 3 Kgs 2 87 lb Dimension Main Body Size m 251x205x 44 6mm Operation Temperature m OC to 45 C Relative Humidity m 10 to 90 40 C Non Condensing Introduction 3 GOT 5840T User s Manual e Vibration m 5 to 500 Hz 2 0 G random for card e Power input 10 30VDC with phoenix power connector m External 60W AC Adapter Power Input 90VAC to 264VAC Power Output 12VDC Max 5A S NOTE All specifications and images are subject to change without
13. er will show you how to install the hardware It includes 2 1 CompactFlash Card Serial Port Ethernet Mounting Way Dram Wireless LAN Card CF card Installation The GOT 5840T 830 provides one CF socket for users to install CompactFlash card Please refer to the following instructions for installation Step 1 Turn off the system and unplug the power cord Hardware Installation 9 GOT 5840T User s Manual Step 2 Find out the cover on the side of the system Step Locate the CompactFlash socket and insert the card into the socket 10 Hardware Installation GOT 5840T User s Manual 2 2 Serial Ports Interface The GOT 5840T 830 has two onboard serial ports COM1 RS 232 422 485 and 2 RS 232 The following table shows you the pin assignments of this connector 1 ata 000 6 baia osm Cs Tres O s La pata Tema Ready OTA 5 I looooo In addition COM1 can be set for RS 232 422 485 by jumper The jump setting is listed as below 531 531 75 31 64 2 64 2 864 2 Hardware Installation 11 GOT 5840T User s Manual When COM1 is set to RS 422 or RS 485 the pin assignments are listed below RS422 RS 485 7 GND GND n 12 Hardware Installation GOT 5840T User s Manual 2 3 Ethernet The GOT 5840T 83
14. er takes over The longer the latency the longer the PCI device can retain control of the bus before handing it over to another PCI device There are several options for your selection gt Allocate IRQ to PCIVGA This item allows BIOS to choose an IRQ to assign for the PCI VGA card Here are the options for your selection No AMI BIOS Setup Utility GOT 5840T User s Manual and Yes gt Palette Snooping Some old graphic controllers need to snoop on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility This item allows such snooping to take place Here are the options for your selection Disabled and Enabled gt PCIIDE BusMaster This item is a toggle for the built in driver that allows the onboard IDE controller to perform DMA Direct Memory Access transfer Here are the options for your selection Disabled and Enabled gt OffBoard PCI ISA IDE Card This item is for any other non onboard PCI ISA IDE controller adapter There are several options for your selection gt 1RQ3 4 5 7 9 10 11 14 15 These items will allow you to assign each system interrupt a type depending on the type of device using the interrupt The option Available means the IRQ is going to assign automatically Here are the options for your selection Available and Reserved gt DMA Channel 0 1 3 5 6 7 These items will allow you to assign each DMA channel a type depending on
15. h Bridge Configuration BIOS SETUP UTILITY USB Functions Enabled 54 AMI BIOS Setup Utility GOT 5840T User s Manual BIOS SETUP UTILITY PCIE Port 5 IOxAPIC Enable Disabled gt USB Function This item allows you to enable or disable USB function gt USB 2 0 Controller This item allows you to enable or disable the USB 2 0 controller gt Audio Controller This item allows you to enable or disable the audio support gt SLP 54 Min Assertion Width This item allows you to set the SLP_S4 Assertion Width gt Restore on AC Power Loss This item can control how the PC will behave once power is restored following a power outage or other unexpected shutdown gt PCIE Port Configuration AMI BIOS Setup Utility 55 GOT 5840T User s Manual This item allows you to set or disable the PCI Express Ports 3 9 Exit Menu The Exit menu allows users to load your system configuration with optimal or failsafe default values BIOS SETUP UTILITY Save Changes and Exit gt Save Changes and Exit When you have completed the system configuration changes select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect Select Save Changes and Exit from the Exit menu and press lt Enter gt Select Ok to save changes and exit gt Discard Changes and Exit Select this option to quit Setup without making any permanent changes to the system configuration
16. is chapter contains general information and detailed specifications of the GOT 5840T 830 Chapter 1 includes the following sections General Description Specification Dimensions Outlets Package List 11 General Description The GOT 5840T 830 is a fan less and compact size touch panel computer equipped with a 8 4 TFT LCD display and low power consumption Intel Atom N270 1 6GHz processor with FSB 533MHz The GOT 5840T 830 supports Windows XP Windows CE NET and Windows XP embedded The panel computer is able to install a CompactFlash card and provide a Mini card socket for wireless module Its excellent ID and friendly user interface make it a professional yet easy to use panel computer The GOT 5840T 830 is an ideal for space limited applications in factory automation machine maker operating systems building automation and more GOT 5840T 830 8 4 TFT SVGA Fanless Touch Panel Computer gt Reliable and Stable Design The GOT 5840T 830 adopts a fanless cooling system and a Introduction 1 GOT 5840T User s Manual gt CompactFlash card which makes it suitable for vibration environments Embedded O S Supported The GOT 5840T 830 not only supports Windows XP but also supports embedded OS such as Windows CE NET and Windows XP embedded For storage device the GOT 5840T 830 supports CompactFlash M card Industrial grade Product Design The GOT 5840T 830 has an incredible design to
17. l Port2 Address This item specifies the base I O port address and Interrupt Request address of serial port 2 The Optimal setting is 2F8 IRQ3 The Fail Safe setting is 2F8 gt Serial Port2 IRQ This item specifies the IRQ used by the serial port 2 gt Serial Port3 Address This item specifies the base I O port address and Interrupt Request address of serial port 3 gt Serial Port3 IRQ This item specifies the IRQ used by the serial port 3 AMI BIOS Setup Utility GOT 5840T User s Manual gt Serial Port4 Address This item specifies the base I O port address and Interrupt Request address of serial port 4 gt Serial Port4 IRQ This item specifies the IRQ used by the serial port 4 AMI BIOS Setup Utility 31 GOT 5840T User s Manual e Hardware Health Configuration This screen shows the Hardware Health Configuration and a description of the selected item appears on the right side of the screen BIOS SETUP UTILITY gt System Temperature CPU Temperature These items display the temperature of CPU and System Vcore etc 32 AMI BIOS Setup Utility GOT 5840T User s Manual e ACPI Settings You can use this screen to select options for the ACPI Settings and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY gt Suspend mode AMI BIOS Setup Utility 33 GOT 5840T User s Manual APM Configuration You can use this
18. lation 17 GOT 5840T User s Manual 2 4 4 VESA ARM Mounting Step 1 Find out the screws as marked on the back side of chassis 2 Assemble the VESA ARM to the back side of the chassis and fix the screws 18 Hardware Installation GOT 5840T User s Manual Step 3 VESA mounting Installation completed Hardware Installation 19 GOT 5840T User s Manual 2 5 DRAM Installation The GOT 5840T 830 provides one 200 pin DDR2 SO DIMM socket that support system memory up to 2GB Please follow steps below to install the memory modules 1 Unscrew six screws to remove the rear chassis 2 Find the SO DIMM socket on mainboard SBC87830 20 Hardware Installation GOT 5840T User s Manual 3 Push down latches on each side of the SO DIMM socket 4 Install the memory module into the socket and push it firmly down until it is fully seated The socket latches are levered upwards and clipped on to the edges of the SO DIMM socket Hardware Installation 21 GOT 5840T User s Manual 2 6 Wireless LAN Card Installation The GOT 5840T 830 provides one Mini card socket for user to install one wireless LAN card When installing the wireless LAN card refer to the following instructions and illustration 1 Open the back cover and find mainboard SBC87830 2 The socket latches are clipped on to the edges of the Mini card socket Install wireless LAN card to the socket 22 Hardware Installati
19. make use of this AMI BIOS Setup Utility 45 GOT 5840T User s Manual IRQ Here are the options for your selection Auto Enabled and Disabled gt Wait For F1 If Error If this item is enabled the system waits for the F1 key to be pressed when error occurs The default setting is Enabled gt Hit DEL Message Display If this item is enabled the system displays the message Press DEL to run Setup during POST The default setting is Enabled e Boot Device Priority The Boot Device Priority screen specifies the the boot device priority sequence from the available devices BIOS SETUP UTILITY ist Boot Device USB Generic STORAG 46 AMI BIOS Setup Utility GOT 5840T User s Manual e Removable Drives Use this screen to view the removable drives in the system The BIOS will attempt to arrange the removable drive boot sequence automatically You can also change the booting sequence BIOS SETUP UTILITY ist Drive USB Gener ic STORAG AMI BIOS Setup Utility 47 GOT 5840T User s Manual e Lan Boot Settings Configuration The Lan Boot Settings Configuration can enable or disable Lan Boot ROM to allow the system boot on LAN BIOS SETUP UTILITY Lan Boot ROM Disabled 48 AMI BIOS Setup Utility GOT 5840T User s Manual 3 7 Security Menu The Security menu allows users to change the security settings for the system BIOS SETUP UTILITY Change Supervisor Password gt Supervisor
20. ng on the PM icon and the go on the calibration 3 Restart the computer 62 Installation of Drivers GOT 5840T User s Manual 4 3 2 Windows CE NET 6 0 Here are supported onboard devices Onboard Multi I O USB PS2 Keyboard and mouse CRT LCD display 10 100 1000 base T Ethernet Compact Flash Onboard Audio Audio Touch Screen Calibration Touch screen In this image we add PenMount Touch drivers and utilities It is customized for 800 x 600 Calibration 1 Click Calibratyion on desktop to calibrate touch screen 2 Inthe start programs menu select save registry thus Calibration data will be saved and effective in next booting Installation of Drivers 63
21. on GOT 5840T User s Manual 3 Find the built in Antenna cable which is tied with other cables on the top of the device Connect antenna cable to MAIN connector on wireless LAN card 4 There are two connectors on wireless LAN card One is MAIN and the other is auxiliary Connect antenna cable to MAIN connector on wireless LAN card ETSI 00120 2 Hardware Installation 23 GOT 5840T User s Manual MEMO 24 Hardware Installation GOT 5840T User s Manual CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMI BIOS setup utility 31 Starting To enter the setup screens follow the steps below 1 Turn on the computer and press the Del key immediately After you press the Delete key the main BIOS setup menu displays You can access the other setup screens from the main BIOS setup menu such as the Chipset and Power menus 3 2 Navigation Keys The BIOS setup utility uses a key based navigation system called hot keys Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process These keys include F1 lt F10 gt Enter lt ESC gt Arrow keys and so on V Note Some of navigation keys differ from one screen to another Left Right The Left and Right lt Arrow gt keys allow you to select a setup screen AV Up Down
22. ons for the USB Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Legacy USB Support Enabled gt Legacy USB Support Use this item to enable or disable support for USB device on legacy operating system The default setting is Enabled gt USB 2 0 Controller Mode Use this item to configure the USB 2 0 controller The default setting is HiSpeed gt BIOS EHCI Hand Off Enabling this item provide the support for operating systems without an EHCI hand off feature The default setting is Enabled 40 AMI BIOS Setup Utility GOT 5840T User s Manual 3 5 PCI PnP Menu The PCI PnP menu allows users to change the advanced settings for PCI PnP devices BIOS SETUP UTILITY Clear NURAM AMI BIOS Setup Utility 41 GOT 5840T User s Manual BIOS SETUP UTILITY Reserved Memory Size Disabled 42 2 gt Clear NVRAM Use this item to clear the data in the NVRAM CMOS Here are the options for your selection No and Yes gt Plug amp Play O S When the setting is No Use this item to configure all the devices in the system When the setting is Yes and if you install a Plug and Play operating system the operating system configures the Plug and Play devices not required for boot The default setting is No gt PCI Latency Timer This item controls how long a PCI device can hold the PCI bus before anoth
23. r the lt Arrow gt keys to move between fields The date must be entered in MM DD YY format The time is entered in HH MM SS format 3 4 Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices You can select any of the items in the left frame of the screen to go to the sub menus CPU Configuration IDE Configuration SuperlO Configuration Hardware Health Configuration ACPI Configuration APM Configuration MPS Configuration PCI Express Configuration USB Configuration For items marked with gt please press Enter for more options BIOS SETUP UTILITY gt CPU Configuration AMI BIOS Setup Utility 27 GOT 5840T User s Manual e Configure advanced CPU settings This screen shows the CPU Configuration and you can change the value of the selected option BIOS SETUP UTILITY Max CPUID Value Limit Disabled gt Max CPUID Value Limit You can enable this item to let legacy operating systems boot even without support for CPUs with extended CPU ID functions gt Execute Disable Bit Capability This item helps you enable or disable the No Execution Page Protection Technology gt Hyper Threading Technology Use this item to enable or disable Hyper Threading Technology which makes a single physical processor perform multi tasking function as two logical ones gt Intel R SpeedStep tm tech This item helps you enable or disable
24. sion 1 0 0 19 Installed Device s Device 0 PenMount 6000 USB Support E mail penmotnt seed net tw Support Website http www penmount com ta 60 Installation of Drivers GOT 5840T User s Manual 4 Select the Standard Calibrate tab Device 0 PenMount 6000 USB Calibrate Setting Edge Compensation About Advanced Mode 9 Plot calibration data Standard Calibration Advanced Calibration Turn off EEPROM storage f 5 Calibration To adjust the display with touch panel click Calibration and follow the calibrate point to do calibration there are five points on screen for calibration F 4 Touch the red square 6 Press OK Installation of Drivers 61 GOT 5840T User s Manual 4 3 Embedded 0 5 The GOT 5840T provides the Windows XP Embedded and Windows CE Net 6 0 The O S is supported devices which are listed below 4 3 1 Windows XP Embedded Here are supported onboard devices Onboard Multi I O USB PS2 Keyboard and mouse CRT LCD display Default 18015 Resolution 800x600 10 100 1000 base T Ethernet Compact Flash Onboard Audio Touch Screen PenMount Touch screen Before you can use and calibrate it here is what you should do 1 Setup Penmount touch device driver by executing C Penmount Windows 2000 V5 0 setup exe When the installation is finished an icon PM appears on the Taskbar 2 Calibrate Penmount touch by clicki
25. tem through incoming calls gt Resume On RTC Alarm You can set Resume On RTC Alarm item to enabled and key in Data time to power on system 36 AMI BIOS Setup Utility GOT 5840T User s Manual e 5 Configuration This screen shows the MPS Multi Processor Specification Configuration and you can change its value A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY MPS Revision gt MPS Revision Use this item to select MPS Multi Processor Specification Revision 1 1 or 1 4 The default setting is 7 4 AMI BIOS Setup Utility 37 GOT 5840T User s Manual e PCI Express Configuration This screen shows the PCI Express Configuration and you can change its value A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Active State Power Management Disabled gt Active State Power Management Use this item to enable or disable the function of Active State Power Management to provide you with lower power consumption The default setting is Disabled 38 AMI BIOS Setup Utility GOT 5840T User s Manual gt SB PCIE Ports Configuration Scroll to this item and press lt Enter gt to view the SB PCIE Ports Configuration sub menu which contains several options for your configuration PCIE Port 0 Auto AMI BIOS Setup Utility 39 GOT 5840T User s Manual e USB Configuration You can use this screen to select opti
26. tep 1 Step 2 Step 3 Chipset VGA Ethernet Dp D A Step 4 Step5 iStep6 Audio Touch i Wireless LAN 2 Select all files and follow the installing procedure 58 Installation of Drivers GOT 5840T User s Manual 4 2 Touch Screen The GOT 5840T 830 uses the 5 wire analog resistve There are the specification and driver installation which are listed below 4 2 1 Specification 5 wire Analog Resistive type Touch Screen Controller PenMount 6000 USB Touch Screen Controller IC Baud Rate 19200 baud rate fixed 1024 x 1024 10 bit A D converter inside Bowen concurmpton Active 24 6mA Idle Mode 13 4mA 4 2 2 Driver Installation Windows XP The GOT 5840T 830 provides a touch screen driver that users can install it under the operating system Windows XP To facilitate installation of the touch screen driver you should read the instructions in this chapter carefully before you attempt installation 1 Insert Driver CD and follow the path to select the Drivers Step 5 Touch Windows Universal Driver V2 1 0 234 i X 1 2 Follow the installing procedure and press OK Installation of Drivers 59 GOT 5840T User s Manual 3 Click Start menu and select PenMount Utilities and then a PenMount Control Panel pops out PenMount Control Panel Device Multiple Monitors Tools About Penmount Control Panel Ver
27. ternal devices are turned OFF A sudden surge of power could ruin sensitive components that the GOT 5840T 830 must be properly grounded The brightness of the flat panel display will be getting weaker as a result of frequent usage However the operating period varies depending on the application environment Turn OFF the system power before cleaning Clean the system using a cloth only Do not spray any liquid cleaner directly onto the screen The GOT 5840T 830 may come with or w o a touchscreen Although the touchscreen is chemical resistant it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen In case your system comes without the touchscreen you must follow the same procedure and not spray any cleaner on the flat panel directly Avoid using sharp objects to operate the touchscreen Scratches on the touchscreen may cause malfunction or internal failure to the touchscreen The flat panel display is not susceptible to shock or vibration When assembling the GOT 5840T 830 make sure it is securely installed Do not open the system s back cover If opening the cover for maintenance is a must only a trained technician is allowed to do so Integrated circuits on computer boards are sensitive to static electricity To avoid damaging chips from electrostatic discharge observe the following precautions Before handling a board or integrated circuit touch an unpainted portion of the system unit
28. the Intel SpeedStep Technology gt intel C STATE tech Use this item to enable or disable the C State technology 28 AMI BIOS Setup Utility GOT 5840T User s Manual gt Enhanced C States This item allows you to enable or disable any available enhanced C states C3E C4E and Hard IDE Configuration You can use this screen to select options for the IDE Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY ATA IDE Configuration Compatible gt Primary Secondary Third IDE Master Slave Select one of the hard disk drives to configure IDE devices installed in the system by pressing lt Enter gt for more options SuperIO Configuration You can use this screen to select options for the SuperlO Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen AMI BIOS Setup Utility 29 GOT 5840T User s Manual BIOS SETUP UTILITY Serial Port1 Address 30 gt Serial Port1 Address This item specifies the base I O port address and Interrupt Request address of serial port 1 The Optimal setting is 3F8 IRQ4 The Fail Safe default setting is 3F8 gt Serial Porti IRQ This item specifies the IRQ used by the serial port 1 gt Seria
29. the type of device using the channel The option Available means the channel is going to assign automatically Here are the options for your selection Available and Reserved AMI BIOS Setup Utility 43 GOT 5840T User s Manual 3 6 Boot Menu The Boot menu allows users to change boot options of the system You can select any of the items in the left frame of the screen to go to the sub menus Boot Settings Configuration Boot Device Priority Removable Drives Lan Boot Settings Configuration For items marked with gt please press Enter for more options BIOS SETUP UTILITY gt Boot Settings Configuration 44 AMI BIOS Setup Utility GOT 5840T User s Manual uration BIOS SETUP UTILITY Boot Settings Confi Quick Boot Enabled gt Quick Boot Enabling this item lets the BIOS skip some power on self tests POST The default setting is Enabled Quiet Boot Set this item to allow the computer system to display the POST messages Set this item to allow the computer system gt to display the OEM logo This is the default setting gt AddOn ROM Display Mode This item selects the display mode for option ROM The default setting is Force BIOS gt Boot Num Lock Use this item to select the power on state for the NumLock The default setting is On gt PS 2 Mouse Support This item determines if the BIOS should reserve IRQ12 for the PS 2 mouse or allow other devices to
30. uctions this equipment might generate or radiate radio frequency energy and cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following methods Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment to another outlet of a circuit that doesn t connect with the receiver 4 Consult the dealer or an experienced radio TV technician for help Shielded interface cables must be used in order to comply with the emission limits Safety Precautions Before getting started please read the following important safety precautions The GOT 5840T 830 does not come equipped with an operating system An operating system must be loaded first before installing any software into the computer Be sure to ground yourself to prevent static charge when installing the internal components Use a grounding wrist strap and place all electronic components in any static shielded devices Most electronic components are sensitive to static electrical charge Disconnect the power cord from the GOT 5840T 830 before any installation Be sure both the system and ex
Download Pdf Manuals
Related Search
GOT 5840T 830