SF-1816 Fan User Manual
Contents
1. SPT HEAVY DUTY 18 FANS IMAGE INSTRUCTION MANUAL PLEASE READ THIS INSTRUCTION BOOKLET THOROUGHLY BEFORE USE SAFETY PRECAUTIONS Please read all instructions before using this product Save these instructions for future reference When using electrical appliances basic precautions should always be followed to reduce breakage risk of fire electric shock and injury to persons including the following e To avoid fire or shock hazard this unit should ONLY be plugged into a polarized 120 volt AC outlet Never use this fan unless it is fully assembled Do no use the fan under the following conditions o High temperature of over 104 F o High humidity o Steam filled room Do not push finger or any object through the grille and do not touch the blade during use Be cautious that curtains or other objects are not sucked into the fan during operation Do not immerse the unit or any part of it in water or any other liquid Unplug the appliance when not in use Place appliance on a leveled surface Do not spray the fan with insecticide which will damage the surface This appliance has a polarized plug one blade is wider than the other To reduce the risk of electric shock this plug is intended to fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature e Do not use app2. Fax 909 468 5279 service Osunpentown com www sunpentown com
3. liance with a damaged cord Contact Sunpentown Customer Service at 909 468 5288 WARNING Unplug unit before disassembly maintenance or cleaning WARNING To reduce the risk of fire or electric shock do not use this unit with any solid state speed control device SPECIFICATIONS MODEL INPUT POWER WEIGHT SF 1816 120V 60Hz 10 lbs MAINTANENCE WARNING Turn unit off and unplug before any maintenance Clean unit with a moistened soft cloth only DO NOT pour or splash water on the unit or use any abrasive type cleaner Clean all external surfaces especially the front and rear grilles PARTS IDENTIFICATION GRILLE SET FROTN amp REAR FRONT GRILLE REAR GRILLE mm OSCILLATION KNOB MOTOR HEAD FAN BLADE E HEAD REST LOCK NUT GRILLE LOCK EXTENSION TUBE SHAFT BASE HEIGHT LOCK NUT LEG ATTACHMENT POINTS POWER CORD FOUR LEGGED j ad BASE RUBBER FEET COVERS SF 1816 INSTALLATION WARNING Do not plug in appliance until unit is fully assembled 1 Install the Extension Tube onto the head assembly and secure by tightening the Lock Nut Head assembly is pre assembled consists of front amp rear grilles fan blade and motor head 2 Attach each leg to the Shaft Base s Attachment Points tighten screw to secure OPERATION 0 OFF fo 1 LOW y 2 MEDIUM 3 HIGH Control knob can turn in either direction Press down on the Oscillation Knob to oscillate fan Pull up on the Oscillation K
4. nob for fixed fan direction To adjust height loosen the Height Lock Nut and adjust to desired height tighten Height Lock Nut Height is adjustable from 2 5 to 3 ft Srl Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase it will be repaired free of charge This guarantee is subject to the following terms What is 0 Sunpentown must be notified of the fault Proof of purchase must be presented to Sunpentown s nominated representative The warranty will be void if the product if modified misused or repaired by an unauthorized person The warranty after repair will not be extended beyond the original one year period All replacement parts will be new or reconditioned Parts which are replaced become the property of Sunpentown The warranty applies for the use of the product in the USA only NOT COVERED Warranty does not include freight charges Incidental or consequential damage caused by possible defects with this product Damage to product caused by improper power supply voltage accident fire floods or acts of nature Failure of product resulting from unauthorized modifications to the product Improper installation or failure to perform the necessary maintenance This GUARANTEE is in addition to your Statutory Rights SUNPENTOWN INTERNATIONAL INC 21415 Baker Parkway City of Industry CA 91789 5236 Tel 909 468 5288
Download Pdf Manuals
Related Search