LZ600RG Red & Green Laser Burst User Manual
Contents
1. 413 445 477 509 0 1 1 1 30 62 94 126 158 190 222 254 286 318 350 382 414 446 478 510 1 1 1 1 31 63 95 127 159 191 223 255 287 319 351 383 415 447 479 511 Dip Switch Position DMX Address2. toot LZ600RG Red amp Green Laser Burst User Manual Thanks for purchasing LZ600RG Red amp Green Laser Burst Please read this manual carefully and thoroughly as it gives important information regarding safety and operation instruction Keep this manual in order to consult it in the future The quality of every set of the products is guaranteed in the factory before the shipment Please check the accessories as the packing list inside If the carton appears to be damaged please inspect the fixture carefully In case damage has been found or some parts are missing please contact our after service department before shipping back the product Safety Information Always ground the fixture electrically properly 2 For indoor use only Keep in cool and dry place with the ambient temperature of 10 35 C Put the fixture in steady place and do not shake 3 Continuous operation of over 4 hours will shorten the life of the laser Please always keep within 4 hours 4 The lens at the aperture will be covered with dirt and dust that will decrease the power output Please clean it with the soft cloths or paper periodically 5 Do not attempt to tear off the warranty paper Such action will avoid the company s warranty 6 Do not attempt to dismantle the fixture if problems happen Please connect with our after service department directly 7 Do not throw away the packing material If problems happen please pack the product with the materia
3. 237 255 Sound Red Green 0 4 Motor Stop 5 125 Right Rotate s ow medium fast CH2 MOTOR 126 131 Motor Stop 132 249 Left Rotate slow medium fast 250 255 Motor Sound CH3 Red Strobe 0 4 No Strobe 5 255 Slow to Fast CH4 Green Strobe 0 4 No Strobe 5 255 Slow to Fast NOTES WHEN CH1IS IN AUTO OR SOUND MODE FROM 92 TO 255 CH2 CH3 CH4 HAVE NO EFFECT AT THE SAME TIME General Operation 1 Mode settings Based on different application different modes are set If in DMX mode bear in mind the correct DMX address assignment 2 Connection connect the projector and DMX 512 console with the DMX signal cable As for Stand Alone there is no need 3 Powered on laser emits the beam in 1 second 4 The projector can be controlled to play and edit shows by DMX512 console in DMX mode by default program in auto mode and in sound active mode if sound sensitivity knob is kept in proper position 5 There is no MASTER SLAVE Mode for this laser projector Auto Sound Active Mode 1 Auto Sound Active Via SOUND_ACTIVE or AUTO no console is needed Laser shows only obey sound or default program 2 Mode settings set the dipswitch in corresponding position that is SOUND_ACTIVE 1 0 10 0 AUTO 1 1 10 0 NOTE PLEASE SET 2 9 ACCORDINGLY 3 Powered on laser emits the beam in 1 second 4 The projector is able to play different default programs in Auto mode by setting dipswitches 2 9 a
4. 334 366 398 430 462 494 1 1 1 1 15 47 79 111 143 175 207 239 271 303 335 367 399 431 463 495 0 0 0 0 16 48 80 112 144 176 208 240 272 304 336 368 400 432 464 496 1 0 0 0 17 49 81 113 145 177 209 241 273 305 337 369 401 433 465 497 0 1 0 0 18 50 82 114 146 178 210 242 274 306 338 370 402 434 466 498 1 1 0 0 19 51 83 115 147 179 211 243 275 307 339 371 403 435 467 499 0 0 1 0 20 52 84 116 148 180 212 244 276 308 340 372 404 436 468 500 1 0 1 0 21 53 85 117 149 181 213 245 277 309 341 373 405 437 469 501 0 1 1 0 22 54 86 118 150 182 214 246 278 310 342 374 406 438 470 502 1 1 1 0 23 55 87 119 151 183 215 247 279 311 343 375 407 439 471 503 0 0 0 1 24 56 88 120 152 184 216 248 280 312 344 376 408 440 472 504 1 0 0 1 25 57 89 121 153 185 217 249 281 313 345 377 409 441 473 505 0 1 0 1 26 58 90 122 154 186 218 250 282 314 346 378 410 442 474 506 1 1 0 1 27 59 91 123 155 187 219 251 283 315 347 379 411 443 475 507 0 0 1 1 28 60 92 124 156 188 220 252 284 316 348 380 412 444 476 508 1 0 1 1 29 61 93 125 157 189 221 253 285 317 349 381
5. 1 0 1 0 1 0 1 0 1 0 1 1 2 3 4 5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34 66 98 130 162 194 226 258 290 322 354 386 418 450 482 1 1 0 0 0 3 35 67 99 131 163 195 227 259 291 323 355 387 419 451 483 0 0 1 0 0 4 36 68 100 132 164 196 228 260 292 324 356 388 420 452 484 1 0 1 0 0 5 37 69 101 133 165 197 229 261 293 325 357 389 421 453 485 0 1 1 0 0 6 38 70 102 134 166 198 230 262 294 326 358 390 422 454 486 1 1 1 0 7 39 71 103 135 167 199 231 263 295 327 359 391 423 455 487 0 0 0 1 8 40 72 104 136 168 200 232 264 296 328 360 392 424 456 488 1 0 0 1 9 41 73 105 137 169 201 233 265 297 329 361 393 425 457 489 0 1 0 1 10 42 74 106 138 170 202 234 266 298 330 362 394 426 458 490 1 1 0 1 11 43 75 107 139 171 203 235 267 299 331 363 395 427 459 491 0 0 1 1 12 44 76 108 140 172 204 236 268 300 332 364 396 428 460 492 1 0 1 1 13 45 77 109 141 173 205 237 269 301 333 365 397 429 461 493 0 1 1 1 14 46 78 110 142 174 206 238 270 302
6. FF 1 ON X OFF or ON DIPSWITCH CHART FUNCT ION 1 2 3 4 5 6 7 8 9 10 1 X X X X X X X X O AUTO_MODE 0 X X X X X X X X O SOUND ACTIVE SET DMX ADDRESS 1 DMX MODE DIPSWITCH SETTING IN AUTO MODE 2 Red color 3 Green color 4 right rotation slow 5 right rotation medinum 4 and 5 right rotation Fast 6 rotation back and for slow 7 rotation back and for medium 6 and 7 rotation back and for fast 9 8 strobing slow 10 9 strobing med 11 8 and 9 strobing fast nc eS DMX ADDRESS MATHEMATICAL RIDDLE ADDR CH_NUM xXx N 1 CH_NUM DMX CHANNEL OF THIS PROJECTOR CH_NUM gt 1 N PROJECTOR CHANNEL NUMBER N 0 1 2 3 EG Each projector is distributed with 4 DMX channels Loop1 ADDR 1 Loop2 ADDR 5 Loop3 ADDR 9 Loop4 ADDR 13 Address Setting In binary system there are only two number 0 meaning OFF and 1 meaning on The numbers increase by multiplying the previous value by 2 Positions from dipswitch 1 to dip switch 9 signify binary value from lower to high position EG LOOP ADDR BINARY 1 1 100000000 2 5 101000000 3 9 100100000 DMX control table Channel Function DMX512 Value Detail 0 4 Close Laser 5 33 DMX Red 34 62 DMX Green 63 91 DMX Red Green on Mode 92 120 Automatic Red 121 149 Automatic Green 150 178 Automatic Red Green 179 207 Sound Red 208 236 Sound Green
7. l and send back to Neo Laser after service department LASER RADIATION AVOID EXPOSURE TO BEAN CLASSIIIB LASER PRODUCT LE Fuse Replacement Note Replace the fuse with the same specified If not the potential damage will be avoided of the company s responsibility Replace the fuse Disconnect the power use the screwdriver to unscrew the fuse holder take out the fuse place it with the good one of the same specified and finally screw the fuse tight Technical Specification 1 AC Power AC 110 V 220V 60 50 HZ Fuse 2A Laser Wavelength 532nm Green Power 40mW Wavelength 650nm Red Power 60mW Control system high capacity macro processor Display Mode DMX Sound Active Auto Laser Safety Level Class IIIB Connector 3 pin DMX Connector XLR Net Weight 5KG Size 340MM 214MM 200MM LxWxH N ON DO BW Function Settings 3 Work Modes 1 SOUND ACTIVE triggered by sound only 2 AUTO_MODE default program not subject to change with the external effect 3 DMX MODE controlled by DMX 512 console only receive console s data Set the system function with the dipswitch See the function listed below 1 The dipswitches 10 and 9 are for the setting of the system function The dipswitches 1 9 are for the setting of the DMX Channel Address in DMX mode 2 The setting of the projector s address is needed via DMX mode Under control of DMX 512 console the projector takes up 2 channel O O
8. nd in SOUND ACTIVE mode it needs to adjust sound sensitivity knob to proper position first O Ofzeossencon o Jeo DE O Ofzeossescon o Jo fo O Ofzcossencon o o Jo la 8 DMX Mode 1 Use standard DMX512 console in DMX Mode 2 Mode settings set the dipswitch in corresponding position that is DMX Mode 10 1 3 Connection Use XLR XLR cable to connect DMX 512 console with the DMX Input of first projector and then output of the first projector with input of second projector till all the projectors are connected in this way 4 Powered on laser emits the beam in 1 second 5 Console control DMX512 1 DMX N DMX DMX Connection Accessories 1 User Manual 1PCS 2 DMX Cable 1PCS 3 Power Cable 1PCS DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET 9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 O OFF 8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1 ON 7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X OFF or ON 6 0 1 0 1 0
Download Pdf Manuals
Related Search