User`s manual - Att.vtp
Contents
1. 10 Appendix Troubleshooting Maintenance Important safety information 20 Safety information 20 Especially about cordless telephones 21 Precautions for users of implanted cardiac pacemakers eesseeseecseeseeeeeeeee 22 Pacemaker patients 22 Especially about telephone answering systems 22 For C UL compliance 23 Mesures de s curit importantes 23 FCC Part 68 and ACTA 26 FCC Part 15h 28 California Energy Commission battery charging testing instructions 29 Limited warranty 30 Technical specifications 33 DECT 6 0 digital technology 33 Telephone operating FANG sn 33 Redefining long range coverage and clarity 33 HD aUdi Orin 33 Getting started Installation You must install and See pages 6 7 charge the battery before for easy instructions using the telephone Your product may be shipped with a protective sticker covering the handset display remove it before use For customer service or product information visit our website at www telephones att com or call 1 800 222 3111 In Canada dial 1 866 288 4268 Avoid placing the telephone base too close to e Communication devices such as television sets VCRs or other cordless telephones e Excessive heat sources e Noise sources such as a window with traffic outside motors microwave ovens refrigerators or fluorescent lighting e2. phones can cause interference with your cordless phone Try installing your phone as far away as possible from these types of electronic devices Do not install this phone near a microwave oven or on the same electrical outlet You may experience decreased performance while the microwave oven is operating If you plug your phone in with a modem or a surge protector plug the phone or modem surge protector into a different location If this does not solve the problem relocate your phone or modem farther apart from one another or use a different surge protector Move your phone to a higher location The phone may have better reception in a high area If other phones in your home are having the same problem contact your telephone service provider charges may apply experience poor sound quality when using the speakerphone For increased sound quality while using the speakerphone place the handset on a flat surface with the dialing keys facing up 14 Appendix Troubleshooting My cordless handset does not ring when I receive a call Make sure that the ringer is not off Refer to Ringer volume in the CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 user s manual provided with your telephone or in the online Complete user s manual Make sure you plug the telephone line cord securely into the telephone base and telephone jack Make sure you plug in the power cord securely The cordless handset may be too far from the telepho
3. 288 4268 1 What does this limited warranty cover The manufacturer of this AT amp T branded product warrants to the holder of a valid proof of purchase CONSUMER or you that the product and all accessories provided in the sales package PRODUCT are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the PRODUCT operating instructions This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada 2 What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period materially defective PRODUCT During the limited warranty period the manufacturer s authorized service representative will repair or replace at the manufacturer s option without charge a materially defective PRODUCT If the manufacturer repairs the PRODUCT they may use new or refurbished replacement parts If the manufacturer chooses to replace the PRODUCT they may replace it with a new or refurbished PRODUCT of the same or similar design The manufacturer will retain defective parts modules or equipment Repair or replacement of the PRODUCT at the manufacturer s option is your exclusive remedy The manufacturer will return repaired or replacement products to you in working condition You should expect the repair or replacement to take
4. NOTE If you are on a phone call in low battery mode you hear four short beeps every minute Getting started Battery installation and charging Step 1 Plug the battery connector securely into the socket inside the handset battery compartment Insert the supplied battery with the label THIS SIDE UP facing up as indicated Step 2 Align the cover flat against the battery compartment then slide it upwards until it clicks into place CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger The CHARGE light on the handset is on during charging IMPORTANT INFORMATION e Use only the supplied rechargeable battery or replacement battery model BT183342 To order visit our website at www telephones att com or call 1 800 222 3111 In Canada dial 1 866 288 4268 e If you do not use the handset for a long time disconnect and remove the battery to prevent possible leakage Registration and deregistration Adding and registering handsets Before using a new CRL30102 handset you must register it with the AT amp T CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 telephone system purchased separately The telephone system can support up to 12 handsets The handsets provided with your telephone system are already registered as HANDSET 1 and so forth Additional handsets registered to the telephone system are assigned in sequential order they are registered up to HAND
5. approximately 30 days 3 How long is the limited warranty period The limited warranty period for the PRODUCT extends for ONE 1 YEAR from the date of purchase If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty this limited warranty also applies to repaired or replacement PRODUCT for a period of either a 90 days from the date the repaired or replacement PRODUCT is shipped to you or b the time remaining on the original one year limited warranty whichever is longer 4 What is not covered by this limited warranty This limited warranty does not cover e PRODUCT that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or e PRODUCT that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of the manufacturer or 30 Appendix Limited warranty e PRODUCT to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or e PRODUCT to the extent that the problem is caused by use with non AT amp T accessories or e PRODUCT whose warranty quality stickers PRODUCT serial number plates or electronic serial numbers have been removed altered or rendered illegible or e PRODUCT purchased used serviced or shipped fo
6. les t l phones sans fil e Confidentialit Les m mes caract ristiques qui rendent les t l phones sans fil si pratiques cr ent galement des restrictions Les appels t l phoniques sont transmis entre le socle du t l phone et le combin par le biais d ondes radio et il se peut que vos conversations t l phoniques soient intercept es par d autres quipements de r ception d ondes radio au sein de la port e du t l phone sans fil Pour cette raison vous ne devez pas consid rer les conversations sur un t l phone sans fil comme tant aussi confidentielles que celles d un t l phone cordon e Alimentation lectrique La base de ce t l phone sans fil doit tre branch e a une prise de courant lectrique fonctionnelle La prise lectrique ne doit pas tre contr l e par un interrupteur mural Les appels ne peuvent pas tre effectu s partir du combin si la base n est pas branch e si elle est hors fonction ou si le courant lectrique est coup e interf rences potentielles aux t l viseurs Certains t l phones sans fil fonctionnent sur des fr quences pouvant causer des interf rences aux t l viseurs et magn toscopes Pour r duire ou pr venir de tels parasites ne pas d poser la base du t l phone sans fil proximit d un t l viseur ou magn toscope ni directement sur celui ci Si votre t l viseur affiche des interf rences loignez le t l phone sans fil de celui ci afin de r duire les pa
7. press to delete digits or characters or press and hold to delete all digits or characters 2 Getting started Quick reference guide handset ADIR VOLUME Press ADIR to show directory entries when the handset is not in use Press to scroll up while in menus While entering names or numbers press to move the cursor to the right Press to increase the listening volume during a call or message playback MENU SELECT When the handset is not in use press to show the menu While in the menu press to select an item or save an entry or setting 7 7 OFF CANCEL PAUSE CHARGE SELECT During a call press to hang up REDIAL MENU While in menus press to cancel an operation Dn back up to the previous menu or exit the VOLUME menu display or press and hold this key to exit to idle mode Press and hold while the telephone is not in use to erase the missed call indicator VCID VOLUME Press WCID to show the caller ID history when the handset is not in use Press to scroll down while in menus While entering names or numbers press to move the cursor to the left Press to decrease the listening volume during a call or message playback QUIET pound key Press repeatedly to display other dialing options when reviewing a caller ID log entry SPEAKER i y AUDIO ASSIST During a call press to enhance the clarity and loudness of your caller s voice Audio Assist is a registered
8. Excessive dust sources such as a workshop or garage e Excessive moisture e Extremely low temperature e Mechanical vibration or shock such as on top of a washing machine or workbench Getting started Quick reference guide handset Incoming call light Flashes when there is a incoming call or when the base is paging the handset CHARGE indicator On when the handset is charging in the telephone base or charger REDIAL PAUSE Press repeatedly to view the last 10 numbers dialed While entering numbers press and hold to insert a dialing pause PHONE FLASH Press to make or answer a call During a call press to answer an incoming call when you receive a call waiting alert PAUSE gan SELECT 1 REDIAL 5 MENU While reviewing a caller ID log entry press 4 repeatedly to add or remove 1 in front of the VOLUME telephone number before dialing or saving it in CID the directory Press and hold to set or to dial your voicemail number when the handset is not in use TONE X Press to switch to tone dialing temporarily during a call if you have pulse service SPEAKER Press to switch between the speakerphone and the handset MUTE DELETE During a call press to mute the microphone While reviewing the caller ID history the directory or the redial memory press to delete an individual entry While predialing press to delete digits SPEAKER While editing numbers or names in the directory
9. SET 12 You must register each handset separately When first purchased all expansion handsets show To register HS see manual Register a handset to your telephone base 1 Before you begin registration make sure the handset is out of the telephone base or charger and shows To register HS see manual 2 Put the handset you wish to register on the telephone base cradle For registration put the handset on the telephone base not the handset charger Registration and deregistration Adding and registering handsets 3 The screen shows Registering Please wait and the IN USE light turns on It takes up to 90 seconds to complete registration Then HANDSET X Registered appears on the screen with X being the handset number 1 12 The handset beeps and the IN USE light turns off The handset is now registered with the telephone base If registration fails the system will automatically try to register again If registration fails after the third try Registration failed appears on the screen for a few seconds and then To register HS see manual This may take up to five minutes to occur Please start again from Step 1 mentioned above Oor You cannot register a handset if any other system handset is in use Registration and deregistration Deregistering handsets You may need to deregister your handsets if e You have 12 registered handsets and need to replace a handset OR e You wish to change the design
10. air of products that are not covered by this limited warranty 6 What must you return with the PRODUCT to get warranty service You must e Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty and e Include a valid proof of purchase sales receipt identifying the PRODUCT purchased PRODUCT model and the date of purchase or receipt and e Provide your name complete and correct mailing address and telephone number 30 Appendix Limited warranty 7 Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT amp T branded PRODUCT It supersedes all other written or oral communications related to this PRODUCT The manufacturer provides no other warranties for this PRODUCT The warranty exclusively describes all of the manufacturer s responsibilities regarding the PRODUCT There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the PRODUCT is fit for ordinary use are limited to o
11. atat G User s manual CRL30102 DECT 6 0 expansion handset for use with AT amp T models CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 Congratulations on your purchase of this AT amp T product Before using this AT amp T product please read the Important safety information section on pages 20 22 of this manual For complete instructions please refer to the manual provided with your CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 telephone You can also visit our website at www telephones att com or call 1 800 222 3111 In Canada dial 1 866 288 4268 This telephone meets the California Energy Commission regulations for energy consumption Your telephone is set up to comply with the energy conserving standards right out of the box No further action is necessary Model number CRL30102 Type DECT 6 0 expansion handset Serial number Purchase date Place of purchase Both the model and serial numbers of your AT amp T product can be found on the bottom of the telephone base Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service RME Telephones identified with this logo have reduced noise and earing Aid T Coi interference when used with most T coil equipped hearing aids and cochlear implants The TIA 1083 Compliant Logo is a trademark of the Telecommunications Industry Association Used under license The ENERGY STAR program www energystar gov re
12. ated handset number of your registered handsets You must first deregister ALL handsets and then register each handset you wish to use again one at a time Please read carefully through all the instructions on this page before beginning the deregistration process Deregister all handsets from your telephone base 1 Make sure that all handsets are out of the telephone base and chargers before you begin deregistration 2 Press and hold 6 HANDSET LOCATOR on the telephone base for about 10 seconds until the IN USE light starts to flash then release the 0 HANDSET LOCATOR button 3 Immediately press HANDSET LOCATOR while the IN USE light is still flashing The light flashes for about seven seconds If the light stops flashing start again with Step 1 4 It takes up to 10 seconds to complete deregistration Before registering the handset again wait for the cordless handset screen to display To register HS see manual 5 To register the handset s to the telephone base again follow the registration instructions on the previous page Q NOTES e Ifthe deregistration process is not successful you might need to reset the system and try again To reset unplug the power from the telephone base and plug it back in e You cannot deregister the handset s if any other system handset is in use e Even if the battery is depleted you can still deregister the handsets by following the steps mentioned above After the handset i
13. ces a spark may be created when the adapter is plugged into the power outlet or when the handset is replaced in its cradle This is a common event associated with the closing of any electrical circuit The user should not plug the phone into a power outlet and should not put a charged handset into the cradle if the phone is located in an environment containing concentrations of flammable or flame supporting gases unless there is adequate ventilation A spark in such an environment could create a fire or explosion Such environments might include medical use of oxygen without adequate ventilation industrial gases cleaning solvents gasoline vapors etc a leak of natural gas etc Do not use this product near water or when you are wet For example do not use it in a wet basement or shower or next to a swimming pool bathtub kitchen sink or laundry tub Do not use liquids or aerosol sprays for cleaning If the product comes in contact with any liquid unplug any line or power cord immediately Do not plug the product back in until it has dried thoroughly Install this product in a protected location where no one can trip over any line or power cords Protect cords from damage or abrasion If this product does not operate normally see the Troubleshooting section on pages 11 18 of this user s manual If you cannot solve the problem or if the product is damaged refer to the Limited warranty section pages 30 32 Do not open this product e
14. cognizes and encourages the use of products that save energy and help protect our environment We are proud to supply this product with an ENERGY STAR qualified power adapter meeting the latest energy AMEN efficiency guidelines 2012 2014 Advanced American Telephones All Rights Reserved AT amp T and the AT amp T logo are trademarks of AT amp T Intellectual Property licensed to Advanced American Telephones San Antonio TX 78219 Printed in China Parts checklist Your telephone package contains the following items Save your sales receipt and original packaging in the event warranty service is necessary Satat User s manual CRL30102 DECT 6 0 expansion handset for use with ATAT models CRL32102 CRL32202 CRL32302 CRL32252 CAL32452 User s manual Cordless handset Charger for cordless handset with power adapter installed dE Battery for Battery cordless handset compartment cover User s manual CRL30102 DECT 6 0 expansion handset for use with AT amp T models CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 Table of contents Getting started Installations 1 Quick reference guide Nandset ccs 2 Charger installation 5 Battery installation and charging sssre ses 6 Registration and deregistration Adding and registering Handset S nannti 8 Register a handset to your telephone base 8 Deregistering handsets 10 Deregister all handsets from your telephone base
15. e ou si le produit est endommag consultez la section Garantie limit e Limited warranty des pages 30 32 N ouvrez pas ce produit sauf tel qu indiqu dans le guide d utilisation L ouverture du produit ou le remontage inad quat pourrait vous exposer des tensions dangereuses ou autres dangers 23 Appendix For C UL compliance e Remplacez les piles uniquement tel que d crit dans votre guide d utilisation pages 6 7 N incin rez pas et ne percez pas les piles elles contiennent des produits chimiques caustiques e L adaptateur de courant est con u pour tre orient verticalement ou install sur le plancher Les broches ne sont pas con ues pour se maintenir en place si la fiche est branch e dans une prise de courant au plafond sous la table ou sous une armoire MISES EN GARDE e N utilisez seulement l adaptateur inclus avec ce produit Pour obtenir une pi ce de rechange visitez notre site Web au www telephones att com ou composez le 1 800 222 3111 au Canada composez le 1 866 288 4268 e N utilisez que la pile de rechargeable incluse ou une pile de rechange mod le BT183342 Pour commander visitez notre site Web www telephones att com ou composez le 1 800 222 3111 Au Canada composez le 1 866 288 4268 e Afin de pr venir les risques d incendie ou d explosion de la pile replacez la pile avec une pile du m me type Jetez les piles puis es en respectant les instructions Sp cifiquement en rapport avec
16. er is intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet Getting started Battery installation and charging Install the battery as shown on page 7 Once you have installed the battery the screen indicates the battery status see the table below If necessary place the handset in the telephone base or charger to charge the battery For best performance keep the handset in the telephone base or charger when not in use The battery is fully charged after 10 hours of continuous charging See the table on page 33 for battery operating times If the screen shows Place in charger and flashes you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time The following table summarizes the battery charge indicators and actions to take The screen is blank or Battery has no or Charge without interruption shows Place in charger very little charge The at least 30 minutes and flashing handset cannot be used The screen shows Battery has enough Charge without interruption Low battery and charge to be used for a at least 30 minutes flashing short time The screen shows Battery is charged To keep the battery HANDSET X charged place it in the telephone base or charger when not in use i
17. es not receive caller ID when on a call Make sure you subscribe to caller ID with call waiting features from your telephone service provider Caller ID features work only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment subscribe to a nontraditional telephone service that uses my computer to establish connections and my telephone doesn t work Make sure your computer is powered on Make sure your Internet connection is working properly Make sure that the software is installed and running for your nontraditional telephone service Make sure to plug your USB telephone adapter into a dedicated USB port on your computer Do not plug it into a multiple port USB hub USB splitter that is not powered In a few rare instances the USB port on your computer may not have enough power In these instances try using a USB hub with its own external power supply If you are using a firewall it may prevent access to your nontraditional telephone service provider Contact your service provider for more information 17 Appendix Troubleshooting The charge light is off or blinking e Make sure you plug the power and line cords in correctly and securely e Unplug the electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the cordless handset and telephone base to reset e Clean the cordless handset charger and te
18. handset For this reason you should not think of cordless telephone conversations as being as private as those on corded telephones Electrical power The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch Calls cannot be made from the handset if the telephone base is unplugged switched off or if the electrical power is interrupted Potential TV interference Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs To minimize or prevent such interference do not place the telephone base of the cordless telephone near or on top of a TV or VCR If interference is experienced moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference Rechargeable batteries This product contains nickel metal hydride rechargeable batteries Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings bracelets and keys The battery or conductor may overheat and cause harm Observe proper polarity between the battery and the battery charger Nickel metal hydride rechargeable batteries Dispose of these batteries in a safe manner Do not burn or puncture Like other batteries of this type if burned or punctured they could release caustic material which could cause injury 21 Appendix Important safety information The RBRC Seal mean
19. id compatible If this product has memory dialing locations you may choose to store emergency telephone numbers e g police fire medical in these locations If you do store or test emergency numbers please Remain on the line and briefly explain the reason for the call before hanging up Perform such activities in off peak hours such as early morning or late evening 26 Appendix FCC Part 68 and ACTA Industry Canada This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Privacy of communications may not be ensured when using this telephone The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met The Ringer Equivalence Number REN for this terminal equipment is 1 0 The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five This product meets the applicable Industry Canada technical specifications 27 Appendix FCC Part 15 This equipment has been tested and found to comply with
20. l the suggestions mentioned above If the previous suggestions do not work disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone e If there is no dial tone on that other telephone either your telephone line cord may be defective Install a new telephone line cord 11 Appendix Troubleshooting e If changing the telephone line cord does not help the wall jack or the wiring to this wall jack may be defective Try using a different wall jack in your home to connect your CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 telephone or contact your telephone service provider charges may apply I cannot dial out Try all the suggestions mentioned above Make sure you have a dial tone before dialing The cordless handset might take a second or two to find the telephone base and produce a dial tone This is normal Wait an extra second before dialing Eliminate any background noise Noise from a television radio or other appliances might cause the phone to not dial out properly If you cannot eliminate the background noise try muting the cordless handset before dialing or dialing from another room with less background noise If other phones in your home are having the same problem contact your telephone service provider charges might apply My cordless handset isn t performing normally Make sure you plug the power cord securely into the telephone base Plug the po
21. lephone base charging contacts each month with a pencil eraser or cloth e A blinking CHARGE light is an indication that the battery is not connected to the handset or is missing completely Ensure that the battery is installed properly I ve set my LCD language to Spanish or French and I don t know how to change it back to English e Press MENU SELECT in idle mode Then enter 364 using the dialing keys You hear a confirmation tone Common cure for electronic equipment If the telephone does not seem to be responding normally try putting the cordless handset in the charger If it does not fix the problem do the following in the order listed 1 Disconnect the power to the telephone base Disconnect the cordless handset battery Wait a few minutes Connect power to the telephone base oR WN Completely remove the battery Replace the battery and place the cordless handset into the telephone base or charger 6 Wait for the cordless handset to reestablish its connection with the telephone base Allow up to one minute for this to take place 18 Appendix Maintenance Taking care of your telephone e Your cordless telephone contains sophisticated electronic parts so you must treat it with care e Avoid rough treatment e Place the handset down gently e Save the original packing materials to protect your telephone if you ever need to ship it Avoid water e You can damage your telephone if it gets
22. ll you should start the recording process and then inform the other party that you are recording the conversation SAVE THESE INSTRUCTIONS 22 Appendix For C UL compliance In compliance with the bilingual requirements for safety caution and warning markings of Canadian Federal and Provincial Territorial statutes and regulations the French version of Important safety information is included Mesures de s curit importantes d entretien pouvant appara tre dans ce guide d utilisation Respectez toujours les mesures de s curit et de s curit de base lorsque vous utilisez ce produit afin de r duire les risques de blessures d incendie ou d lectrocution Ce symbole vous alertera d informations importantes ou d instructions Information relative a la s curit e Veuillez lire et comprendre toutes les instructions de ce guide d utilisation Relectez toutes les inscriptions apparaissant sur le produit e vitez d utiliser le t l phone pendant un orage Il pourrait y avoir un faible risque d lectrocution e N utilisez pas un t l phone pr s d une fuite de gaz Dans certaines circonstances une flamm che pourrait se produire lorsque l adaptateur est branch une prise de courant ou lorsque le combin est d pos sur son chargeur Ceci est un v nement fr quent associ avec la fermeture d un circuit lectrique L utilisateur ne devrait pas brancher un t l phone dans une prise de courant et ne devrai
23. ly equipped phones of the leading competition Now calls can be taken in the basement backyard and garage with exceptional sound quality Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission FCC Even so this handset and telephone base can communicate over a certain distance which can vary with the locations of the telephone base and handset the weather and the construction of your home or office Redefining long range coverage and clarity This telephone base comes with an antenna which gives much better clarity and covers a longer range than before HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls There is no additional telephone service requirement to use HD audio It is designed to work with standard telephone service Your system will automatically enhance all received sound with HD audio 33 atat www telephones att com Audio Assist is a registered trademark of Advanced American Telephones 2012 2014 Advanced American Telephones All Rights Reserved AT amp T and the AT amp T logo are trademarks of AT amp T Intellectual Property licensed to Advanced American Telephones San Antonio TX 78219 Printed in China Issue 2 0 AT amp T 06 14
24. ne base Charge the battery in the cordless handset for at least 10 hours For optimum daily performance return the cordless handset to the telephone base or charger when not in use You may have too many extension phones on your telephone line to allow all of them to ring simultaneously Try unplugging some of the other phones The layout of your home or office may be limiting the operating range Try moving the telephone base to another location preferably on an upper floor If other phones in your home are having the same problem contact your telephone service provider charges may apply Test a working phone at the phone jack If another phone has the same problem contact your telephone service provider charges may apply Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone Try installing your phone as far away as possible from these types of electronic devices Remove the battery Replace it and place the cordless handset into the telephone base Allow up to one minute for the handset to reestablish its connection with the telephone base Your line cord may be defective Try installing a new line cord 15 Appendix Troubleshooting My calls cut in and out while I m using my cordless handset Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone Try installing your phone as far away as pos
25. ne year from date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall the manufacturer be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the PRODUCT or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this PRODUCT Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase 32 Appendix Technical specifications RF frequency band 1921 536MHz 1928 448MHz Operating temperature 32 F 122 F 0 C 50 C Handset voltage 2 4VDC 3 2VDC Charger voltage 6VAC 300mA AC adapter output Talk time cordless handset speakerphone Up to five hours Standby Up to seven days Operating times vary depending on your actual use and the age of the battery DECT 6 0 digital technology The AT amp T DECT 6 0 products offer unsurpassed range performance and sound clarity This is achieved through a unique antenna design and advances in noise filtering technology An independent laboratory has confirmed that AT amp T DECT 6 0 products perform up to 45 better in range competitions against similar
26. phone service provider This equipment may not be used with Party Lines If you have specially wired alarm dialing equipment connected to your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable the alarm equipment consult your telephone service provider or a qualified installer If this equipment is malfunctioning it must be unplugged from the modular jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the Limited warranty If this equipment is causing harm to the telephone network the telephone service provider may temporarily discontinue your telephone service The telephone service provider is required to notify you before interrupting service If advance notice is not practical you will be notified as soon as possible You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC Your telephone service provider may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone service provider is required to notify you if such changes are planned If this product is equipped with a corded or cordless handset it is hearing a
27. r repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to products used for rental purposes or e PRODUCT returned without valid proof of purchase see item 6 or e Charges for installation or setup adjustment of customer controls and installation or repair of systems outside the unit 5 How do you get warranty service To obtain warranty service visit www telephones att com or call 1 800 222 3111 In canada dial 1 866 288 4268 NOTE Before calling for service please review the user s manual a check of the PRODUCT s controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT s to the service location The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you Transportation delivery or handling charges are prepaid The manufacturer assumes no risk for damage or loss of the PRODUCT in transit If the PRODUCT failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the rep
28. rasites e Piles rechargeables Ce produit comporte des piles rechargeables l hydrure m tallique de nickel Usez de prudence lorsque vous manipulez de telles piles et veillez ne pas les court circuiter avec des mat riaux conducteurs tels que des bagues bracelets et cl s La pile ou le conducteur peut surchauffer et vous br ler Respectez la polarit ad quate entre les piles et le chargeur de piles 24 Appendix For C UL compliance e Piles rechargeables a l hydrure m tallique de nickel Jetez ces piles de mani re s curitaire N incin rez pas et ne peercez pas les piles Comme pour les autres piles du m me type si elles sont br l es ou perc es des mati res corrosives peuvent s en chapper ce qui risque de causer des br lures ou autres blessures corporelles Le sceau de l organisme de recyclage RBRC sur les piles l hydrure m tallique de nickel signifie que le fabricant de cet appareil participe volontairement au programme industriel visant reprendre et recycler ce type de piles lorsqu elles ne servent plus au sein du territoire des tats Unis et du Canada Vous devez apporter ces piles chez un d taillant participant ou le centre de recyclage le plus pr s de chez vous Ou vous pouvez composer le 1 800 8BATTERY afin de conna tre les endroits qui acceptent les piles l hydrure m tallique de nickel mortes Mesures pr ventives pour les utilisateurs de stimulateurs cardiaques implant s dans l organi
29. rge light is off or blinking page 18 in this Troubleshooting guide Charge the battery in the cordless handset for at least 10 hours For optimum daily performance return the cordless handset to the telephone base or charger when not in use If the battery is depleted it may take approximately 30 minutes to charge the handset before it shows Low battery Refer to the table on page 6 for details You may need to purchase a new battery Refer to Battery installation and charging in this user s manual on pages 6 7 hear other calls while using my phone Disconnect the telephone base from the telephone jack and plug in a different telephone If you still hear other calls call your telephone service provider 13 Appendix Troubleshooting I get noise static or weak signals even when I m near the telephone base If you subscribe to high speed Internet service DSL digital subscriber line through your telephone line you must install a DSL filter between the telephone line cord and the telephone wall jack The filter prevents noise and caller ID problems as a result of DSL interference Please contact your DSL service provider for more information about DSL filters You may be able to improve the performance of your cordless phone by installing your telephone base as far as possible from any other existing cordless telephone system that may already be installed Other electronic products such as HAM radios and other DECT
30. rsations t l phoniques vous devriez informer l autre partie lorsque vous activez l enregistrement CONSERVEZ CES INSTRUCTIONS 25 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments ACTA The label on the back or bottom of this equipment contains among other things a product identifier in the format US AAAEQ TXXXX This identifier must be provided to your telephone service provider upon request The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines See the installation instructions in the user s manual The Ringer Equivalence Number REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called The REN for this product is encoded as the 6th and 7th characters following the US in the product identifier eg if is 03 the REN is 0 3 In most but not all areas the sum of all RENs should be five 5 0 or less For more information please contact your tele
31. s charged for at least 10 minutes the screen shows To register HS see manual 10 Appendix Troubleshooting If you have difficulty with your phone please try the following suggestions For Customer Service visit our website at www telephones att com or call 1 800 222 3111 In Canada dial 1 866 288 4268 The handset registration is unsuccessful Follow the handset registration instructions to register the handset again see Adding and registering handsets on pages 8 9 My telephone doesn t work at all Make sure the power cord is securely plugged in Make sure you plug the battery connector securely into the cordless handset Make sure you plug the telephone line cord securely and firmly into the telephone base and the telephone wall jack Charge the battery in the cordless handset for at least 10 hours For optimum daily performance return the cordless handset to the telephone base or charger when not in use If the battery is depleted it might take approximately 30 minutes to charge the handset before it shows Low battery See page 6 for details Reset the telephone base Unplug the electrical power Wait for approximately 15 seconds then plug it back in Allow up to one minute for the cordless handset and telephone base to reset You may need to purchase a new battery Refer to Battery installation and charging in this user s manual on pages 6 7 The display shows No line cannot get a dial tone e Try al
32. s that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel metal hydride rechargeable batteries when taken out of service within the United States These batteries may be taken to a participating local retailer of replacement batteries or recycling center Or you may call 1 800 8 BATTERY for locations accepting spent Ni MH batteries Precautions for users of implanted cardiac pacemakers Cardiac pacemakers applies only to digital cordless telephones Wireless Technology Research LLC WTR an independent research entity led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers Supported by the U S Food and Drug Administration WTR recommends to physicians that Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker Should NOT place wireless telephones directly over the pacemaker such as in a breast pocket when it is turned ON Should use the wireless telephone at the ear opposite the pacemaker WTR s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones Especially about telephone answering systems Two way recording This unit does not sound warning beeps to inform the other party that the call is being recorded To ensure that you are in compliance with any federal or state regulations regarding recording a telephone ca
33. sible from these types of electronic devices Do not install this phone near a microwave oven or on the same electrical outlet You may experience decreased performance while the microwave oven is operating If you plug your phone in with a modem or surge protector try plugging the phone or modem surge protector into a different location If this does not solve the problem relocate your phone or modem farther apart from one another or use a different surge protector Move your telephone base to a higher location The phone may have better reception when installed in a high area If other phones in your home are having the same problem contact your telephone service provider charges may apply My caller ID isn t working Caller ID is a subscription service You must subscribe to this service from your telephone service provider for this feature to work on your phone The caller may not be calling from an area that supports caller ID Both your and your caller s telephone service providers must use caller ID compatible equipment If you subscribe to high speed Internet service DSL digital subscriber line through your telephone line you must install a DSL filter between the telephone line cord and the telephone wall jack The filter prevents noise and caller ID problems resulting from DSL interference Contact your DSL service provider for more information about DSL filters 16 Appendix Troubleshooting System do
34. sme Stimulateurs cardiaques ne s applique qu aux t l phones sans fil num riques L organisme Wireless Technology Research LLC WTR une firme de recherche ind pendante a men une valuation pluridisciplinaire des interf rences entre les t l phones sans fil portatifs et les stimulateurs cardiaques implant s dans l organisme Appuy e par l Administration des aliments et drogues FDA des tats unis la firme WTR recommande aux m decins Avis aux d tenteurs de stimulateurs cardiaques Ils doivent tenir le t l phone sans fil une distance d au moins six pouces du stimulateur cardiaque Ils ne doivent PAS placer le t l phone sans fil directement sur le stimulateur cardiaque tel que dans une poche de chemise lorsque celui ci est en fonction Ils doivent utiliser le t l phone sans fil en l appuyant sur l oreille qui se trouve dans la direction oppos e au stimulateur cardiaque L tude effectu e par l organisme WRS n a pas identifi de risque pour les d tenteurs de simulateurs cardiaques caus par les gens qui utilisent un t l phone sans fil a proximit de ceux ci Sp cifiquement en rapport avec les r pondeurs t l phoniques Enregistrement deux voies Cet appareil n met pas de bips d avertissement qui permettent de pr venir l autre partie que vous enregistrez la conversation Pour assurer votre conformit aux r glements f d raux ou provinciaux en rapport avec les enregistrements des conve
35. t pas d poser un combin charg dans le chargeur si le t l phone se trouve dans un environnement comportant une concentration de gaz inflammables ou ignifuges moins de se trouver dans un endroit o la ventilation est ad quate Une flamm che dans de tels environnements pourrait provoquer une explosion De tels environnements peuvent comprendre les endroits o de l oxyg ne des fins m dicales est utilis sans ventilation ad quate des endroits o se trouvent des gaz industriels dissolvants de nettoyage des vapeurs de gazoline etc une fuite de gaz naturel etc e N utilisez pas ce produit pr s de l eau ou lorsque vous tes mouill s Par exemple ne l utilisez pas dans des sous sols humides ou sous la douche ou pr s d une piscine d un bain d un vier de cuisine ou d une cuve de lavage N utilisez pas de liquides ou de vaporisateurs a rosol de nettoyage Si le produit entre en contact avec du liquide d branchez imm diatement le fil t l phonique ou le cordon d alimentation Ne rebranchez pas le produit avant qu il soit compl tement sec e Installez cet appareil dans un endroit prot g o personne ne peut tr bucher sur les cordons d alimentation ou la ligne t l phonique Prot gez les c bles contre les dommages ou l abrasion e Si le produit ne fonctionne pas correctement consultez la section D pannage Troubleshooting des pages 11 18 de ce guide d utilisation Si vous ne pouvez pas r gler le probl m
36. the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that ma
37. ting instructions To activate the CEC battery charging testing mode 1 Unplug the telephone base power adapter from the power outlet Make sure all handsets are plugged with charged batteries before proceeding 2 While you press and hold HANDSET LOCATOR plug the telephone base power adapter back to the power outlet 33 After about 20 seconds when the IN USE light starts flashing release HANDSET LOCATOR and then press it again within two seconds The process takes up to one minute to complete When the phone successfully enters the CEC battery charging testing mode the IN USE light turns off and all handsets display To register HS see manual You hear a confirmation tone When the phone fails to enter this mode repeat the steps mentioned above Note The telephone base will be powered up as normal if you fail to press HANDSET LOCATOR within two seconds in Step 3 To deactivate the CEC battery charging testing mode 1 Unplug the telephone base power adapter from the power outlet then plug it back in The telephone base is powered up as normal 2 Register your handsets back to the telephone base See pages 8 9 for handset registration instructions 29 Appendix Limited warranty The AT amp T brand is used under license any repair replacement or warranty service and all questions about this product should be directed to our website at www telephones att com or cau 1 800 222 3111 in canada dial 1 866
38. trademark of Advanced American Telephones 3 Getting started Quick reference guide handset Handset EQUALIZER side view During an outside call intercom call message or announcement playback press to change the quality of the audio to best suit your hearing Main menu PAUSE Gane SELECT Main menu REDIAL MENU e Play messages e Answering sys e Directory The gt symbol highlights e Caller ID log a menu item e Intercom e Ringers e Set date time e Settings e Web address Using menus e Press MENU SELECT to show the menu e Press WciD or ADIR to scroll through menu items e Press MENU SELECT to confirm or save changes to a highlighted menu item e Press OFF CANCEL to cancel an operation back up to the previous menu or exit the menu display For complete instructions refer to the user s manual provided with your CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 telephone system If you are unable to find your user s manual go to www telephones att com manuals to read and or download the manual 4 Getting started Charger installation Install the charger as shown below Plug the power adapter into an electrical outlet not controlled by a wall switch IMPORTANT INFORMATION e Use only the power adapter supplied with this product To order a replacement power adapter visit our website at www telephones att com or call 1 800 222 3111 in canada dia 1 866 288 4268 e The power adapt
39. wer adapter into a different working electrical outlet without a wall switch Move the cordless handset closer to the telephone base You might have moved out of range Reset the telephone base Unplug the electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the cordless handset and telephone base to reset Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone Try installing your phone as far away as possible from these types of electronic devices 12 Appendix Troubleshooting Out of range OR No pwr at base appears on my cordless handset Ensure you plug the telephone base in properly and the power is on Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize Move the cordless handset closer to the telephone base You may have moved out of range Reset the telephone base Unplug the electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the cordless handset and telephone base to reset Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone Try installing your phone as far away as possible from these types of electronic devices The batteries do not hold a charge If the cordless handset is in the telephone base or charger and the charge light is not on refer to The cha
40. wet Do not use the handset in the rain or handle it with wet hands Do not install the telephone base near a sink bathtub or shower Electrical storms e Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety take caution when using electric appliances during storms Cleaning your telephone e Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or mild soap e Do not use excess water or cleaning solvents of any kind Remember that electrical appliances can cause serious injury if used when you are wet or standing in water If the telephone base should fall into water DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL Then pull the unit out by the unplugged cords 19 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user s manual Always follow basic safety precautions when using this product to reduce the risk of injury fire or electric shock Safety information Read and understand all instructions in the user s manual Observe all markings on the product Avoid using a telephone during a thunderstorm There may be a slight chance of electric shock from lightning Do not use a telephone in the vicinity of a gas leak Under certain circumstan
41. xcept as directed in your user s manual Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks Replace batteries only as described in your user s manual pages 6 7 Do not burn or puncture batteries they contain caustic chemicals This power adapter is intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under the table cabinet outlet 20 Appendix Important safety information A CAUTIONS Use only the power adapter provided with this product To obtain a replacement visit our website at www telephones att com or call 1 800 222 3111 in canada dial 1 866 288 4268 Use only the supplied rechargeable battery or replacement battery model BT183342 To order visit our website at www telephones att com or call 1 800 222 3111 in Canada dial 1 866 288 4268 To prevent risk of fire or battery explosion replace with the correct battery type Dispose of used batteries according to the instructions Especially about cordless telephones Privacy The same features that make a cordless telephone convenient create some limitations Telephone calls are transmitted between the telephone base and the handset by radio waves so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless
42. y cause undesired operation Privacy of communications may not be ensured when using this telephone To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The handset may be safely held against the ear of the user The telephone base shall be installed and used such that parts of the user s body other than the hands are maintained at a distance of approximately 20 cm 8 inches or more This Class B digital apparatus complies with Canadian requirement CAN ICES 3 B NMB 3 B 28 Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy conserving standards right out of the box These instructions are intended for California Energy Commission CEC compliance testing only When the CEC battery charging testing mode is activated all telephone functions except battery charging will be disabled When first purchased and properly installed for charging see the Battery installation and charging section on page 7 put the cordless handset in the handset charger to charge The CEC battery charging testing mode is activated while charging If you have registered the cordless handset to the CRL32102 CRL32202 CRL32302 CRL32352 CRL32452 base below are the tes
Download Pdf Manuals
Related Search