DHOM Laser User`s Manual
Contents
1. UltraLasers lt Your source for high quality affordable lasers Laser User s Manual Thank you for using DHOM series products please read this instruction manual carefully before using these products and store it for later references I Safety Precautions 1 1 Please ensure the shell temperature of the laser head is similar to room temperature before turning on the laser to prevent differences between temperatures that may be harmful to the device 1 2 Laser beams are extremely dangerous to ensure the safety of you and others do not point the beam at one s body or flammable objects Do NOT point the beam directly at one s eyes 1 3 This product should be used in a dry clean and static free area Avoid heat damp and shock 2 Installation Notices 2 1 Please place the laser head and the power supply on a heat proof surface e g metal board 2 2 This product has an air cooled system please ensure that there is 5cm 10cm space between the laser head and an object to avoid overheating 2 3 When this product and other parts are placed inside the box ensure that there is enough ventilation room ensuring that air can flow freely in and out of the box 2 4 If putting ventilation fan within the package please ensure that the wind direction and the laser ventilation fan are in the same direction NOTE Not following the above instructions could lead to damages to the parts 3 Product Knowledge 3 1 Power switch2. ation please refer to Instruction of Laser Modulation 4 8 To turn off device turn off the key switch turn off the power supply then pull out the plug 4 9 Re attach the sticker to the laser aperture 5 Warranty 5 1 This product has a warranty of ONE year after the date of purchase 5 2 Signs of destruction dismantling self repair disobeying the instructions broken in appearance or mismatch of serial numbers and records are NOT included in the watranty 5 3 Service is only available within the warranty limit and by normal operation of the device Ultralasers Inc Address 610 3050 Pharmacy Ave Toronto Canada M1W 2N7 E Mail shawn ultralasers com
3. placed in OFF is turned off ON is on 3 2 Key position placed in OFF is turned off ON is on 3 3 AC input voltage of this product is 50 60Hz AC 85 260V Ultralasers Inc Address 610 3050 Pharmacy Ave Toronto Canada MIW 2N7 E Mail shawn ultralasers com 3 4 Modulated signal access port can be used for TTL or analog modulation as for the access to TTL signal red for positive white for negative as for the access to analog modulation red for positive blue for negative 3 5 Work Status Indicators 3 6 Laser head power connector 3 7 Power supply connector 3 8 Laser aperture 4 Operation 4 1 Connect the wires from the laser head to the power supply and secure the screw 4 2 Remove the sticker over the laser head To avoid the beam from harming others before starting a rather dark metal object should be placed in front of the laser head to absorb the beam 4 3 Plug in the power supply to the outlet 4 4 Turn on the power switch Power indication light should turn on 4 5 Turn on the key switch Laser indication light should light up in approximate 10 seconds laser will start operating After ten minutes under room temperature the product will operate stably 4 6 If indication Alarm lights up turn off the product immediately by the power supply let system cool down and then restart it the laser will operate at normal Status 4 7 When need to access to TTL and analog modul
Download Pdf Manuals
Related Search