Solaris User Manual
Contents
1. A A CAUTION This machine is for indoor use only and should not be used or stored outdoors or in wet conditions CAUTION If it is suspected that there is hazardous dust or flammable materials stop cleaning the area immediately and consult your superior WARNING Only use accessories and spare parts provided with the machine or those approved by the manufacturer The use of other accessories may impair the safety of the machine A e Ensure the machine is switched off before adding or changing accessories 1 3 Transporting the machine CAUTION Incorrect lifting techniques may result in personal injury where applicable do not lift large and heavy machines without assistance We advise that the manual handling regulations are followed Please refer to the technical table for details on weight of machine When transporting the machine ensure that all components tanks and removable parts are securely fastened and that the supply cord and plug are nat trailing Detach hose and wand from machine where applicable When transporting the machine the handle should be locked in the upright position Take extreme care when moving the machine up or down steps or stairs 1 4 Symbols 8 Markings WARNING Earth symbol 2 Preparing for use 2 1 Electrical connection Before connecting the machine to the power supply check that your supply voltage corresponds with that marked on the rating label The pow2. Truvox parts e Defects in other than genuine Truvox parts or repairs modifications or adjustments performed by other than a Truvox service engineer or authorised service agent e Costs and risks of transport relating directly or indirectly to the guarantee of this product e Consumable items and wear parts such as drive belts This guarantee does not affect your statutory rights nor your rights against the supplier arising from their sales or purchase contract 10 Waste Electrical amp Electronic Equipment ee a WEEE Do noi dispose of this device with unsorted waste Improper disposal may be harmful to the environment and human health Please refer to your local waste authority for information on return and collection systems in your area 11 Technical specification Class construction Enclosure to IPX4 Fitted with 15m supply cord and non rewireable plug Solaris SSD400 Brush cleaning width cm Brush speed Brush pressure max Squeegee width Solution tank capacity Recovery tank capacity Productivity theoretical 1200 43 42 2 70 V s CS Pumprating 82 EE Handle vibration Ire Productivity practical W i W cm O O Warranty year 1 Noise levels measured at a distance of 0 25 metre from machine and 1 5 metres above floor when scrubbing a hard floor Measurements recorded using a hand held meter 2 Handle vibration does not exceed 2 5 m s when operating on any
3. away from the machine when in use Before using the appliance check that the mains power voltage corresponds with the voltage shown on the rating plate All parts are to be positioned as indicated in the instructions before using the machine Do not operate the machine if it malfunctions or is damaged in any way Contact an authorised service agent for repair or adjustment Do not operate switches or touch the mains plug with wet hands as this may cause electric shock When unplugging pull the plug not the supply cord e Do not pull or carry by cord use cord as a handle close a door on cord or pull around sharp edges or corners Keep hair loose clothing fingers and all parts of body away from openings and moving parts Keep cord away from heated surfaces Do not use where hazardous dust is present Do not use in an explosive atmosphere Do not pick up oil or other flammable material Do not leave the machine connected to the electricity supply when not in use always remove the plug from the socket outlet Switch off the machine before removing the plug e The power supply cord must be regularly inspected for signs of damage If the power supply cord is damaged it shall only be replaced by the manufacturer its service agent or a similar qualified person in order to avoid a hazard Only replace the supply cord with the type specified in the instruction manual Do not operate the machine with a damaged s
4. e Fill the solution tank with clean water using a bucket tap or hose and an appropriate measure of detergent e Replace tanks on base and reconnect hoses e Ensure solution hose is fully engaged and Captive in the connector allowing solution to flow thus preventing the pump from overheating e IMPORTANT Only chemicals recommended by the appliance manufacturer should be used i e low foaming and follow the chemical manufacturer s directions regarding use handling disposal and health and safety provisions e The tank capacity is 15 litres Do not overfill the tank as spillage may occur when in use e IMPORTANT When the solution tank has emptied switch off the machine and empty the recovery tank before refilling the solution tank 4 Controls The operating controls are located on the handle and indicated in the logos above the switches Figs 2 3 4 Fig 3 1 Brush motor switch Used to switch motor ON and OFF Lights when in the on position 2 Neon indicator Lights when the machine thepower supply 3 Vacuum motor switch Used to switch motor ON and OFF Provides suction at the squeegee Lights when in the on position is connected to Fig 4 4 Solution feed triggers When squeezed supplies cleaning solution to the brush head 5 Handle adjustment lever Used to adjust handle to comfortable working height 6 Cut out reset button Cut out protects brush motor from overheating Press but
5. ORIGINAL INSTRUCTIONS CAUTION READ THESE INSTRUCTIONS BEFORE USING THE MACHINE User instructions Solaris SSD400 scrubber dryer floor cleaning machine 03 7937 0000 Iss 3 04 14 C Contents 1 FOCUS UAT ONIN AION maren e a o ose 3 1 1 IMMPOMANL SalelY AGVICC sia dci 3 TZ GUIGCIIMNES TOF TS OD SNA lat Rs 4 1 3 MANS POMING MING Machina oia eoeiten 4 NAPS VIMO SM ARNG S EE mnt eee cn 4 2 PIC DANING TOM USS SE PP latina naiaslndieaind Mu emualantina a Se autre Cole 4 ZA EICCIIGaICOMMOGCUO I itartpesahivaishei ce NA iadda 4 3 Preparing TOUS usina ten nr ele cn 5 3 1 Adjusting the handle Deluca ld 5 3 2 FIIMO n solution Tanta deus hear anu tee a a a taco ixownh 5 CONTOS serene a a a a et ne ee en eee eee nie 5 A A e ee ie tn 6 p Slain the Macia dida 6 HAS DES M Ass RS aa sen tte na as 6 5 3 Changing squeegee blades nt eee 6 5 4 Fitting the side brush ie 6 5 5 When cleaning is finished sise 6 6 RON Med oi te ed tie saad de l ed di le tn jaasieen te 7 7 MEantenance esad A nd E a titre E oi 7 A nn 7 9 AU a 7 10 Waste Electrical 4 Electronic Equipment WEEE oocccccoccnnccnncnncononcnnnnnnconcnnanoncononcnnononcononnanennos 7 tt PECHIMEAl S DSCIICATION a a deed en a NE 8 12 ACCESS Soo 8 A 9 14 Declaration DN ti 10 IMPORTANT BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE 1 Product Information These commercial floor
6. aning solution but with vacuum motor OFF Scrub floor again picking up the solution e When scrubbing is complete unplug the machine from the power supply empty the solution tank and clean and dry the machine e IMPORTANT Dispose of unused cleaning solution in accordance with the manufacturer s directions 5 2 Changing the brush WARNING This appliance has been designed for use with the brushes specified by the manufacturer The fitting of other brushes may affect its safety Always ensure machine is unplugged before fitting or removing parts e To change the brush first remove both recovery tank and solution tank to reduce weight and avoid spillage e Move handle to upright position pull backwards and downwards to rest on the floor thereby raising the base e Push end of brush shaft with a finger and withdraw shaft completely e Place new brush in position and insert shaft through brush until it clicks into place e Return machine to the floor replace tanks and reconnect hoses etc 5 3 Changing squeegee blades The squeegee blades are self adjusting for wear however when wet pick up becomes ineffective or blades are damaged they should be replaced as follows e Raise machine base as for a brush change e Slide squeegee blades out sideways from the holder e Slide new blades into place with the ribbed side facing outwards e Return machine to the floor 5 4 Fitting the side brush Always ensure ma
7. chine is unplugged before fitting or removing parts e Remove recovery and solution tank and raise machine base as for a brush change e Remove shaft from brush and position the magnetic brush guard on right hand side of machine locating the peg on the guard in the hole in the side plate and align the shaft hole e Insert side brush shaft through guard and push right through main brush until it clicks into place e Return machine to floor replace tanks and reconnect hoses 5 5 When cleaning is finished e When cleaning is finished unplug the machine from the power supply and lift off and empty the recovery and solution tanks over a suitable sink or drain e Flush out the recovery tank with clean water e Replace tanks and wipe over the machine with a damp cloth e Wipe squeegee blades clean e IMPORTANT Dispose of unused cleaning solution in accordance with the manufacturer s directions e Remove brush and wash in warm soapy water 6 Storage e Always unplug empty wipe down and dry the machine after use e The solution tank and recovery tank should be emptied and flushed out with clean water e Wrap the supply cord around the handlebar and cable winder ensuring that the plug is not trailing on the floor e When storing the machine for long periods raise the base to protect the brush and squeegee from possible distortion e Store the machine in a dry indoor area only 7 Maintenance Before undertaking opera
8. d clean squeegee Squeegee slot blocked or blades damaged Reposition dome Vacuum dome out of position If the fuse blows several times the machine should be checked by an authorised Service Agent 14 Declaration of Conformity EC Declaration of Conformity We Truvox International Ltd of Third Avenue Millbrook Southampton Hampshire England SO15 OLE declare that the machinery Make Type Model Serial Number Scrubber dryer Solaris SSD400 from 000001 Year of Construction 2010 has been manufactured using the following transposed harmonised European Standards and technical specifications Ref No 2006 42 EC 2006 95 EC BS EN 60335 1 BS EN 60335 2 72 2004 108 EC EN61000 3 2 EN61000 3 3 EN55014 1 EN55014 2 Title Machinery Directive and subsequent amendments The Low Voltage Directive and subsequent amendments The EMC Directive and subsequent amendments Signed in SOUTHAMPTON England on the 29 day of December 2009 Signature Le CE Name David Overell Technical file Solaris Iss 1 Position Managing Director Mark Campbell Product Support Manager 11 Authorised dealer Truvox International Limited Third Avenue Millbrook Southampton Hampshire S015 OLE England Tel 44 0 23 8070 2200 Fax 44 0 23 8070 5001 e mail truvox truvox com Web www truvox com
9. er supply cord plus any extension leads should not exceed 30m in total otherwise you may experience problems starting up the machine The cross section of any extension cable wiring must be at least 2 5 mm Should an extension cord be used ensure cord rating is adequate for the equipment Do not use extension cord in coiled condition as this could result in overheating of the cord UK only The supply cord for 230v models is fitted with a plug containing a 13 amp fuse Should the fuse require replacement it must only be replaced by a 13 amp fuse conforming to BS1362 and the fuse cover must be refitted If the fuse cover is lost the plug must not be used until the correct replacement cover is fitted IMPORTANT If the supply cord is damaged it must only be replaced by a special cord available from the manufacturer or an authorised service agent WARNING THIS APPLIANCE MUST BE EARTHED 3 Preparing for use 3 1 Adjusting the handle height Select the most comfortable handle height using theadjustment lever on the handle and lock in position 3 2 Filling the solution tank e The solution tank can be filled on or off the machine To fill the tank off the machine the recovery tank must first be removed e Remove vacuum hose and clear dome from recovery tank and lift off tank e Disconnect solution feed hose from solution tank and lift tank off base To release hose pull connector collar forward Fig 1 Fig 1
10. ervice Repairs and servicing of Truvox products should only be performed by trained staff Improper repairs can cause considerable dangers to the user 9 Guarantee Your product is guaranteed for one year from the date of original purchase or hire purchase against defects in materials or workmanship during manufacture Within the guarantee period we undertake at our discretion to repair or replace free of charge to the purchaser any part found to be defective subject to the following conditions CONDITIONS 1 Claims made under the terms of the guarantee must be supported by the original invoice bill of sale issued at the time of sale or the machine Serial Number 2 For claims under this guarantee contact the supplier from whom you purchased the product who will arrange the appropriate action Do not initially return the product as this could result in transit damage 3 Neither Truvox nor its distributors shall be liable for any incidental or consequential loss 4 This guarantee is governed by the laws of England This guarantee does not cover any of the following Periodic maintenance and repair or replacement of parts due to normal wear and tear 5 This guarantee is governed by the laws of England This guarantee does not cover any of the following Periodic maintenance and repair or replacement of parts due to normal wear and tear e Damage caused by accident misuse or neglect or the fitting of other than genuine
11. surface with brush or pads Measurements recorded by an independent test laboratory 12 Accessories Standard brush black 03 7869 0000 General purpose scrubbing blue Heavy duty brush blue 03 7916 0000 Heavy duty scrubbing Squeegee kit 1 blade 03 7891 0000 Squeegee blades 2 or 4 required IMPORTANT Genuine accessories are only available from authorised Service Agents or Truvox Customer Services Department 13 Fault diagnosis WARNING Before undertaking maintenance operations or adjustments switch A off machine and unplug from the electricity supply The following simple checks may be performed by the operator Machine not working motors Lack of voltage electrical Check fuse supply cord not running supply plug and socket outlet Vacuum motor not running Faulty motor Contact Service Agent switch illuminated Brush motor running but Brush shaft incorrectly Refit shaft brush not positioned Contact Service Agent rotating Loose or broken drive belt Cleaning solution not flowing Solution hose not correctly Check connection is secure fitted to tank connector Hose blocked Check and clear hose Waterways in spray bar Check and clean spray bar blocked Solution tank empty Refill tank Blocked filter in solution tank Check and clean filter Damaged pump Contact Service Agent Vacuum motor running but Hose from squeegee blocked Check and clear hose squeegee not picking up or split Check an
12. tions or WARNING adjustments switch off machine and maintenance unplug from the electricity supply The machine requires minimum maintenance apart from the following checks by a trained operator e Supply cord Regularly inspect sheath plug and cord anchorage for damage or loose connection Only replace the supply cord with the type specified in these instructions e Solution tank Check water flow if restricted inspect hoses and tubes for blockage or kinks Check filter is clean and undamaged A damaged filter must be replaced e Recovery tank Check condition and clean tank e Squeegee blades Check condition and replace worn or damaged blades e Solution spray bar Remove the brush to access the spray bar Check that the solution feed holes are not blocked or resticted and clean as necessary 8 After Sales Service Truvox machines are high quality machines that have been tested for safety by authorised technicians It is always apparent that after longer working periods electrical and mechanical components will show signs of wear and tear or ageing Under extreme or specialised conditions and or insufficient maintenance shorter maintenance intervals are necessary Use only original Truvox spare parts Use of other spare parts will invalidate all warranty and liability claims Should you require after sales service please contact the supplier from whom you purchased the machine who will arrange s
13. ton once to reset cut out and restart motor 7 Cable winder Used to hold supply cord in place on handle when machine is not in use 5 Operation 5 1 Starting the machine Fully unwind the supply cord and plug in to a convenient socket outlet e With the solution tank filled and the handle set at a comfortable height the machine is ready for use e Switch ON the brush motor followed by the vacuum motor e Release cleaning solution at regular intervals by means of the handle triggers WARNING Always ensure adequate solution is on the floor scrubbing without solution could damage the floor surface and or the machine brush Keep the machine moving while the brush is rotating e IMPORTANT Should the brush stop rotating due to operation of the cut out on the brush motor switch OFF the machine and allow to cool for a few minutes Press the cut out reset button on left hand side Fig 5 and restart the machine Fig 5 e WARNING If foam or liquid is emitted switch off immediately and empty recovery tank Liquid emitted could be hazardous as a result of its temperature or chemical content e To STOP the machine release solution feed triggers switch off brush motor then vacuum motor e Normal movement of the machine is in a forward and backward direction e Proceed to operate the machine in the normal manner releasing cleaning solution from time to time as required e For heavy soilage scrub floor with cle
14. treatment machines are designed for the scrubbing of hard floors in indoor areas This machine must only be used for the manufacturers approved application Do not use the machine where it is suspected that the carpet floor or upholstery contains health endangering dust or debris such as asbestos or chemical waste If this is suspected do not proceed contact your supervisor supplier or Truvox International for advice The following instructions contain important information about the machine and safety advice for the operator Equipment must be operated serviced and maintained in accordance with the manufacturer s instructions If in doubt contact the supplier of your machine These instructions are valid for the following models Solaris SSD400 1 1 Important Safety Advice When using electrical equipment basic safety precautions should be followed including the following Read all instructions carefully before use This appliance is suitable for commercial use for example in hotels schools hospitals factories shops offices rental businesses and other than normal housekeeping purposes This machine is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety Keep children and unauthorised persons
15. upply cord or plug or after the machine malfunctions or is damaged in any way Contact an authorised Service Agent for repair or adjustment e The plug of the power supply cord must be removed from the socket outlet before commencing cleaning of the machine or undertaking maintenance operations e Do not kink or twist the power cord Take care when using a machine near the top of stairs to avoid overbalancing WARNING Keep the power supply cord clear of moving parts and or rotating brushes During operation hazard may occur when running the machine over the power supply cord 1 2 Guidelines for the operator WARNING A Operators must be fully trained in the use of the machine in accordance with these instructions able to perform user maintenance and the correct selection of accessories e Operators should be physically capable to manoeuvre transport and operate the machine Operators should be able to recognise unusual operation of the machine and report any problems Only use the machine on firm level surfaces Wear suitable footwear to avoid slipping Wear suitable clothing to keep dry and warm Where possible implement job rotation and adequate rest periods to avoid continuous use of the same muscles Do not leave machine running unattended Do not smoke when using the machine Do not put any objects into openings Do not use with any opening blocked keep free of dust debris hair or anything that may reduce air flow
Download Pdf Manuals
Related Search