Home
DNR-202L User Manual
Contents
1. to respond to the UPnP request Click Search again if cameras are not immediately displayed Camera Name DCS 932L Model DCS 932L Address 192 168 0 5 Port 80 Administrator Name Password Step A INDEX Camera 4 Click the Save Setting button to add the selected camera Step 5 Check to make sure the updated information is displayed in the Camera List Step 6 Repeat steps 2 through 5 to add additional cameras to your list D Link DNR 202L User Manual 50 Section 5 Configuration Audio and Video This section will allow you to configure and modify the audio and video parameters for each camera Step 1 SFE OCS Ot Select the camera which you would like to modify from the camera list De inti a Step 2 Me mo ne NVR will display the parameters for the selected camera You can modify the information Ea henec rromstoncftnessected ames M on this page epee ere nee Tor Name The Name of the camera l piia ane Video Format MPEG4 H 264 Motion JPEG Select the resolution of the eee the image Video Format Select the Video Format the camera supports oo eee nee i S Framerate Select the Frame Rate of the camera a Vendor Model Resolution Select the resolution of the camera 2 DCS 932L 192 168 0 5 D Link DCS 932L 3 DCS 5222L 192 168 0 6 D Link DCS 5222L Quality Select the image quality None Audio Check the Enable Audio option to enable audio recording Go to Web Cli
2. Event Record Check the Event Record box to have specified events recorded pre event Specify the period to save recorded data before the camera event takes place post event Specify the period to save recorded data after a camera event takes place Enable Recording Check to Enable Recording Sechedule and choose the days of the week and RECORDING SCHEDULE schedule the start end time for scheduled recording Enable Recording Schedule Note If you don t know the configuration of your e mail account do a web search for your SMPT Simple Mail Transfer Protocol settings with the name of your e mail provider D Link DNR 202L User Manual 52 Section 5 Configuration Time and Date Setup Time Zone Select your Time Zone from the drop down menu Enable Daylight Saving Check this box to Enable Daylight Saving time Auto Daylight Saving Select this option and the clockis adjusted automatically according to daylight saving of the selected time zone Set Date and Time Manually Select this option to configure the daylight saving date and time manually Offset Sets the amount of time to be added or removed when daylight saving time is enabled Synchronize with NTP Server Check the box to enable the camera to synchronize time settings with an NTP Network Time Protocol server NTP Server Select the NTP Server that is closest to your location Set the Date and Time Manually This option allows you to Set date and time
3. D Link DNR 202L User Manual 32 Section 4 mydlink View NVR iPhone iPod Touch Grid View On an iPhone or an iPod touch with mydlink View NVR you will see the Device List of your mydlink account on the main screen Tap on the DNR 202L to see the four grid view iPad Grid View On an iPad with mydlink View NVR you can expand or shrink the Device List of your mydlink account at the left hand side of the screen Tap on the DNR 202L to display the Live Video view Double tap on one of the grids to go to single channel mode of the Live Video screen Double tap again to return back to the four grid view Channel Selection e Insingle channel mode you can swipe through the video channels By swiping to the right you will see previous channels and swiping to the left you will see the next video channel You can use this method to view full frame video from each of the cameras connected to the DNR 202L e Double tap on one of the channels to select a single channel Live Video stream e Tap on the My Device button to return to the Device List of your mydlink account D Link DNR 202L User Manual F 3 04 DNR 202L F 3 04 DNR 202L 33 Section 4 mydlink View NVR 1 Recording Enable Disable In single channel mode tap on the video stream once and tap the recording button to manually enable disable recording 2 Pan Tilt Zoom PTZ DNR 202L To access the PTZ controls tap on the video stream once while streaming si
4. target e mail server account ahii E Enable Email Account Motion Select this option Sender email address DI Trigger This option will allow you to receive notifications when there is an external aia i A 3 eapient emal address s detected during camera trigger input to the camera Server address Sa User name DI Trigger Select this option to allow your NVR to Password send notifications when external trigger input to Loss This option will allow you to receive notifications when a camera loses network Port thecamera This server requires a secure connection StartTLS Loss Select this option to connection sort piteteiele lost network connection Alert Mail Sent e mail to specified smtp account Alert Mail Check the Alert Mail box to have e mail sent to a specified SMTP account after EVENT when receving camera a camera event is triggered oi cH2 cH3 cH pre event Period to E Motion E Motion E Motion E Motion ei aa ioc E DI Trigger DI Trigger TIDI Trigger DI Trigger ak E rad ee Interval This setting allows you to specify how long in seconds you would like to e TE ep wi eaves E ERA or g g Please Login to camera s web page to enable motion amp I O detection related settings oe receive e mail notifications from your NVR ane E Alert Mail Interval Seconds weekday s and start end time to do scheduled C Event Record pre event Seconds post event Seconds ee pleas
5. Click Next to continue 4 Set Device Information Name Description DNR 202L STEP 5 Click Finish to complete the setup process Wait a few moments while the DNR 202L saves your settings 5 Finish X D Link DNR 202L User Manual 48 Section 5 Configuration DHCP Static IP IP Address Subnet Mask Gateway DNS1 DNS2 Enable DHCP server DHCP IP Address Range DHCP Lease Time Network Setup Select this connection if you have a DHCP server running on your network and would like a dynamic IP address to be automatically updated to your NVR You may obtain a static or fixed IP address and other network information from your network administrator for your NVR A Static IP address will simplify access to your NVR in the future The Static IP address The default value 255 255 255 0 is used to determine if the destination is in the same subnet The Gateway forwards frames to destinations in a different subnet Invalid gateway settings may cause the failure of transmissions to a different subnet Primary domain name server that translates names to IP addresses Secondary domain name server to backup the primary one Check to enable the DHCP server If your network doesn t have DHCP server enable NVR DHCP server for easier local network setup Enter the DHCP IP Address Range Enter the DHCP Lease Time in hours D Link DNR 202L User Manual Here you can configure the LAN Settings f
6. Consumption 8 5 watts 5 include 2 x 2 5 HDD Temperature e Operating 0 to 40 C e Storage 20 to 70 C 4 to 158 F Humidity e Operating 10 to 90 non condensing e Storage 5 to 95 non condensing Dimensions WLU GEO D Link DNR 202L User Manual 64 Appendix C Contact Technical Support Contacting Technical Support U S and Canadian customers can contact D Link technical support through our web site or by phone Before you contact technical support please have the following ready e Model number of the product e g DNR 202L e Hardware Revision located on the label on the bottom of the device e g rev A1 e Serial Number s n number located on the label on the bottom of the device You can find software updates and user documentation on the D Link website as well as frequently asked questions and answers to technical issues For customers within the United States For customers within Canada Phone Support Phone Support 877 453 5465 800 361 5265 Internet Support Internet Support http support dlink com http support dlink ca D Link DNR 202L User Manual 65 Appendix D Warranty Warranty Subject to the terms and conditions set forth herein D Link Systems Inc D Link provides this Limited Warranty e Only to the person or entity that originally purchased the product from D Link or its authorized reseller or distributor and e Only for products purchased and delivered within th
7. Download and save the latest firmware to your local hard drive of your computer Click the Browse button to search the local hard drive for the firmware update file Click Load to upgrade the firmware D Link DNR 202L User Manual onr 202 LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS HELP User System A new firmware upgrade may be available for your DNR 202L It is recommended to keep your DNR 202L firmware up to date to maintain and improve the functionality and performance of ab iaaa dane H D D Click D Link Support Page to check for the latest available firmware Log Out To upgrade the firmware on your DNR 202L please download and save the latest firmware version from the D Link Support Page to your local hard drive Locate the file on your local hard drive by clicking the Browse button Once you have found and opened the file using the browse button click the Apply button to start the firmware upgrade CURRENT FIRMWARE INFORMATION Current NVR Firmware Version v1 00 16 Firmware Date May 3 2013 Firmware Path Helpful Hints Firmware updates are released periodically to maintain and improve the functionality of your DNR 2021 and also to add new features If you run into a problem with a specific feature of the DNR 202L check our support site by dicking on the link and see if an updated firmware is available for your DNR 2021 56 Section 5 Configuration Hard Drive Configuration This page
8. This area will display a list of the recording devices 7 Zoom Slider Use the zoom slider control to zoom in and out of the timeline Recordings are graphed below the timeline Blue bars indicate an event was 8 Available Recordings a l recorded Red bars indicate the camera is set to always record 9 Selected Period Click within the timeline to select a recording period D Link DNR 202L User Manual 22 Section 3 mydlink Portal mydlink Portal After registering your NVR with a mydlink account in the NVR Setup Wizard you ces My profile will be able to remotely access your NVR from the www mydlink com website ena Weme semos When you log in to your mydlink account you will see the My Devices page Click You can connect to your DNR 202L s web interface to access its online features including live video of your connected cameras and on the Connect button and enter your DNR 202L user name and password to e wir awr 0N 202e vaara ens ee complete the login process The default user name is admin When you connect to the NVR you will see the Live Video page Refer to Live Video on page 26 Playback Status NVR Info a gt Gg amp ia S Full Channel Record on event No event has being detected e Recording is on D Link DNR 202L User Manual 23 Section 3 mydlink Portal NVR Status Icons From the My Devices page you can view the online status of each of your NVRs Your onlin
9. displays information about the USB external storage for the DNR 202L It also allows the user to configure the attached USB storage devices Click on Enable Automatic Overwrite to enable circular recording Click on the Format button to format the USB storage device This section allows you to setup a configura n the selected hard drives Please note thet the data nfiguration o stored on the drives wil be erased during the formatting process Note All data will be erased from the attached USB storage device during formatting Enable Automatic Overwmte USB1 Name PHD Capacity 715 4 G8 Used Space 711 8 G8 Unused Space 3 6 GB Status idle USB2 Name Toshiba Capacity 0 0 MB Used Space 0 0 MB Unused Space Status Unknow File System D Link DNR 202L User Manual 57 Section 5 Configuration Status Camera Status This page displays and allows you to change both the connection and recording status of your cameras Connection Shows the camera connection status Status J onr 202 0f LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS HELP Recording Shows the recording schedule and current recording status of the cameras a a Status If the camera is disconnected the field will say No Record However the Ee perem ee recording may continue but produce blank video d reaa oe become Connection Recording Frame 7 z Status Status Rate Bit Rate Dema connection DCS 942L 192 168 0 3 Connected No Record 29fp
10. manually Set Time from My Computer This will synchronize the date and time information from your PC D Link DNR 202L User Manual onr 202 ff LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS HELP Wizard The Time configuration option allows you to configure update and maintain the correct time on the internal system dock In this section you can set the time zone that you are in and set the NTP Network Time Protocol Server in order to periodically update your system time from the NTP Server You can also use your computer s time as the system ti Current Time 2 55 10 AM 2013 5 31 Current Time Zone GMT 08 00 Taipei TIME ZONE Time Zone GMT 08 00 Taipei E Enable Daylight Saving Auto Daylight Saving Set date and time manually Offset Month Week Day of week Hour Minutes Synchronize with NTP erver With the option NTP SERVER E Synchronize with NTP Server NTP SERVER SET THE DATE AND TIME MANUALLY E Set date and time manually Year 2013 Month Day Hour 2 Minute 55 Second 53 Section 5 Configuration Maintenance User Management The Administrator can configure all functions of the NVR as well as set user access to the NVR The Administrator account cannot be deleted The default password for admin is blank New Password Set a New Password for the administrator account onr 202 ff LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS nee e m be E U N f Syste This section allows you to create
11. unique users for accessing your NVR device You can create Or SEGNIty PUNPOSES ICIS User Name Enter User Name for new user account sen O O O e hd al a nl your iA ET e new avin e camel en ati l 1 New Password Enter the New Password for the new account New Password Retype Password User List All the existing user accounts will be listed here Select ADD USER ACCOUNT the name from the drop down menu and click Delete aa 63 characters maximum New Password 63 characters maximum to delete user accounts from the list You may want to acca reserve at least one user account as a guest account USER LIST User Name Note Setting a password after the first login is strongly recommended If the administrator password is lost you may hold the reset button on the rear panel of the device to reset the NVR to factory defaults This will erase all the previously saved settings D Link DNR 202L User Manual 54 Section 5 Configuration System The System settings section allows you to restart the system or reset the device to its factory default settings Restoring the unit to factory settings will erase all settings including any rules that you created Restart If the NVR is malfunctioning or crashes unexpectedly click the Restart button Restarting the NVR will take about 90 seconds Restore Click Restore to reset all configurations to factory default re e ee ee rules that you have created The current system se
12. 0 3 BCS 942L Playing 2061 52 kbps 30 fps 39 Section 5 Configuration Playback Click the Playback tab to see the NVR s recorded video You may select an icon described in the list below in order to play back adjust and export the recorded video Open Recording Click on this control to open the View Recorded Files window Search Recordings on page 42 Display Single feed Use this button to switch to a single camera feed in f the video display area Use this button to switch to a 2 x 2 camera feed in bom Display 2 x 2 feed l the video display area _ Actual Size Use this button to display the video recording in it s a native resolution Use this button to switch to a full screen view of the video recording OSD Settings the On Screen Display 7 a Print Image Use option this to print a still image By Saveasimage Use this option to save a still image Image Use this option to apply image enhancements Enhancement Use the slider to adjust the playback volume Enable camera OSD Foreground Font Arial wi 12 X Size Color Blue z Information Camera number Camera name Camera Status l Date l Time D Link DNR 202L User Manual 40 Section 5 Configuration EEE Select a camera and click this button to Play Stop or Pause the video Speed Click the plus or minus button to increase or decrease the playback speed onr 202
13. 192 168 0 1 0 0 0 0 DEVICE INFORMATION Name Description Current Rx Tx System Up Time VOLUME INFORMATION USB1 Name Total Hard Drive Capacity me Total Hard Drive Capacity Used S gt pace Unused Space 14 Status idle DNR 202L DNR 202L 7835280 280560 bps 14 Day 9 Hour 0 Minute 59 Section 5 Configuration Logs This page displays the system event list of your DNR 202L The System Log for your device will include the following information 1 User login logout 2 Modify delete account 3 System restart 4 System reset to default 5 System firmware update First Page Click to display the First Page Previous 10 Click to display the previous 10 pages oun 2021 A ss Next 10 Click to display the next 10 pages Camera Status Lessa dna EES Tre en s75 the rse event 1 of your on 2021 tog sd frequently check the logs Log for system hard drive Last Page Click to go to the Last Page ue errors me Date Time Info 2013 05 31 02 52 56 admin login Ok from 192 168 0 2 Clear Clears all of the log contents 2013 05 31 02 52 27 system change admin password 2013 05 31 02 39 56 admin login Ok from 192 168 0 2 2013 05 30 18 15 54 admin login Ok from 192 168 0 2 s e e 2013 05 30 18 15 26 camera device 192 168 0 6 added modified to ch 3 Download Cl ick on th IS button to Download logs 2013 05 30 18 15 24 camera device 192 168 0 5 added modified to ch 2 2013 05 30 18 15 24 camera device
14. 192 168 0 5 removed from ch 3 2013 05 30 18 15 23 camera device 192 168 0 3 added modified to ch 1 2013 05 30 18 08 35 camera device 192 168 0 6 added modified to ch 1 2013 05 30 18 08 35 camera device 192 168 0 5 added modified to ch 3 First page Previous 10 Next 10 Last page D Link DNR 202L User Manual 60 Section 5 Configuration Support The DNR 202L Help Menu provides a list of support topics Click the links to view the helpful tips onr 202 0f LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS HELP Live Video DAA e Live Video Playback eo Plback Setup e Setup es e Maintenance Maintenance e Status Status Log Out LIVE PLAYBACK Wizard Network Setup Add Camera Audio and Video Event Setup Time and Date MAINTENANCE e Users e System e Firmware Upgrade e H D D STATUS e Camera Status e System Info e Logs D Link DNR 202L User Manual Appendix A LED and Alarm Overview LED and Alarm Overview cD eoor Status Description Power amp Network LED Network Yes e Off on USB2 LED ic HDD2 disabled USB1 button Press button for 3 seconds Un mount HDD1 Buzzer will beep long USB1 LED off USB2 button Press key2 for 3 seconds button Un mount HDD2 Buzzer will beep long USB2 LED off Auto scan Auto scan function Press scan button for 3 seconds Start auto scan IP Cameras in local network button Buzzer will beep long Camera Echo function Press scan button for 0 5 sec
15. Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved D Link DNR 202L User Manual 15 Section 2 Assembly and Installation Adding Cameras After Initial Setup Step 1 Open your web browser and go to http www mydlink com support Click on memm the Storage tab and then select the DNR 202L from the row of products Then Ea DNR 202L Setup Wizard from the Wizard column select the link to the preferred Setup Wizard Welcome AET E me ae os DNR 202L Setup At the welcome page click on the Skip button Seas NOTE Ensure that cameras have been installed on the network before initiating the DNR 202L Setup Wizard Select your Language English v Skip the Setup Wizard if you are adding cameras to a system that has already been configured Skip gt Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved Step 2 Follow the on screen prompts to ensure the NVR is plugged in and powered on Is the LED on the top of your NVR lit blue D Link DNR 202L User Manual Section 2 Assembly and Installation Step 3 Select your NVR from the list then click Next If you have multiple NVRs you can identify them by the MAC Address printed on the label on the bottom of your device Step 4 Confirm the password for your device Check the box if you want to change the pas
16. D Link Version 1 0 08 19 2013 User Manual mydlink Camera Video Recorder DNR 202L a Preface D Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes Information in this document may become obsolete as our services and websites develop and change Manual Revisions Revision Date Description August 19 2013 e Initial release for Revision A1 Trademarks D Link and the D Link logo are trademarks or registered trademarks of D Link Corporation or its subsidiaries in the United States or other countries All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies Copyright 2013 D Link Corporation All rights reserved This publication may not be reproduced in whole or in part without prior expressed written permission from D Link Corporation D Link DNR 202L User Manual 2 Table of Contents Preface es ssessccesscrosenniojuacoivevostesecastesviusstauessasiccsscszosavatieinisiavemsarsohestts 2 Manual R VISIONS sesesessssesssesesesesesesesssssssseseseseseseseseceseeseses 2 TAEMA KS Pen ree eee emer EEE O 2 Product OvervieW sesesesessesssesesesesesesesesscecsesesesesesesesesesesseseses 5 Package Contents ee sessesseseesessesseseeseesessesseseeseesessesseseeseeses 5 IntroductiOn essesesssesese
17. ED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES EXPRESS IMPLIED OR STATUTORY Governing Law This Limited Warranty shall be governed by the laws of the State of California Some states do not allow exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the foregoing limitations and exclusions may not apply This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state Trademarks D Link is a registered trademark of D Link Corporation D Link Systems Inc Other trademarks or registered trademarks are the property of their respective owners Copyright Statement No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from D Link Corporation D Link Systems Inc as stipulated by the United States Copyright Act of 1976 and any amendments thereto Contents are subject to change without prior notice Copyright 2012 by D Link Corporation D Link Systems Inc All rights reserved CE Mark Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to tak
18. ED and Alarm OvervieW s ssssessessessessesesessesseseeseesessesses 62 Technical Specifications wiescssesssaesissacesesaceiareiassensiecssnsestsnss 63 Contacting Technical Support sesessessesessessessesseseesessess 65 ETALE AE ENE E E E E E 66 REGIS EE ALON sea cosceacantoeyenaccnsvasseunsotvecisaststceconsaveh oaseernecnensuaess 72 D Link DNR 202L User Manual Section 1 Product Overview Product Overview Package Contents DNR 202L mydlink Camera Video Recorder q Power adapter Ethernet cable Quick Install Guide If any of the above items are missing please contact your reseller Note Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product D Link DNR 202L User Manual 5 Section 1 Product Overview Introduction The DNR 202L is a Network Video Recorder NVR that can support up to four network cameras recording M JPEG MPEG4 or H 264 with a storage option of up to two attached USB hard disks The NVR can record video from network cameras directly to disk storage without the need for a dedicated PC Powered by mydlink technology the DNR 202L can be easily setup for Internet access It supports real time monitoring and playback from anywhere via an Internet browser and mobile app The DNR 202L can keep recording at the same time users are viewing a live feed or searching video playback Exceptional video management and playback
19. NTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN THE ENTIRE RISK AS TO THE QUALITY SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT D Link DNR 202L User Manual 69 Appendix D Warranty Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY LAW D LINK IS NOT LIABLE UNDER ANY CONTRACT NEGLIGENCE STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT INCONVENIENCE OR DAMAGES OF ANY CHARACTER WHETHER DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF GOODWILL LOSS OF REVENUE OR PROFIT WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D LINK S PRODUCT IS CONNECTED WITH LOSS OF INFORMATION OR DATA CONTAINED IN STORED ON OR INTEGRATED WITH ANY PRODUCT RETURNED TO D LINK FOR WARRANTY SERVICE RESULTING FROM THE USE OF THE PRODUCT RELATING TO WARRANTY SERVICE OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY EVEN IF D LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT THE MAXIMUM LIABILITY OF D LINK UNDER THIS WARRANTY IS LIMIT
20. NVR Info DISK STATUS USB1 Name PHD Total Hard Drive Capacity 715 4 GB Used Space 712 0 GB Unused Space 3 4 GB Status record USB2 Name Toshiba Total Hard Drive Capacity 0 0 MB Used Space 0 0 MB Unused Space 0 0 MB Status Unknow File System CAMERA STATUS Live Video Playback Status NVR Info DISK STATUS INDEX Camera Name Address eae a ee Bit Rate 1 DCS 6010L 192 168 0 122 Connecte d Standby 15 fps 1964 37 kbps 2 DCS 5222L 192 168 0 104 Offline Standby 0 fps 0 00 kbps k DCS 5010L 192 168 0 101 Offline Standby 0 fps 0 00 kbps 4 DCS 932L 192 168 0 117 Offline Standby 0 fps 0 00 kbps 29 Section 3 mydlink Portal NVR Info Click the NVR Info tab to view information about your NVR This page also provides access to your NVR s configuration interface NVR Name The Device Name is a unique name that can help you to identify your NVR mydlink No Displays the mydlink number of your device e aeo Se Se NVR In NVR Name DNR 202L Model Name Displays the Model Name of your device i errr Model Name DNR 202L Mac Address F0 7D 68 0F E4 DE MAC Address Displays the MAC Address of your device ee es Sei ee saa You can set up advance configuration by clicking Advanced Setting Button NVR activated on Displays the time and date that your device was added to mydlink Advanced Setting Advanced Settings Clicking on the Advanced Settings button allows you to access your NVR s configuration interface To open yo
21. NVRs you can identify them by the MAC Address printed on the label on the bottom of the device Step 4 By default the Admin ID is admin and the password is blank Create and confirm an NVR Password for your device Click Next to continue D Link DNR 202L User Manual Install NVR Setup NVR DNR 202L Setup Wizard Select your device BOGOEG E DNR 202L 192 168 0 109 F0 7D 68 0F E5 0C A DHCP Check the MAC Address on the back of your NVR to choose which NVR you v nt to setup gt j Model No ONR 202L FC mo CS2OILEEUP ATE TU MAC XOOQOCOCOOOK WIG Rescan Next gt Copyright 2013 D Link Corporation Inc All rights reserved Troubleshooting Support HDD Viewer Manual Quick Guide Adobe D mydlink Setup Wizard _ DNR 202L Setup Wizard Install NVR Setup NVR Set your NVR password wulbUiLs Please enter a password to secure your NVR Admin ID damin a i New Password Tr i Confirm New Password Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved 11 Section 2 Assembly and Installation Step 5 The Setup Wizard will scan for attached storage devices and ask if you wish to format the devices found Note Select Skip if you don t want to change the HDD configuration Click Next to continue Step 6 Setup your Internet conne
22. S 192 168 0 1 Secondary DNS 0 0 0 0 mydlink M Save a shortcut to mydlink on the Desktop Click on Finish to close the Setup Wizard Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved D Link DNR 202L User Manual 19 Section 2 Assembly and Installation HDD Viewer Software Installation Your DNR 202L comes with a convenient application to assist you in managing your recorded video If you have the HDD Viewer installed you will be able to remove a USB HDD from the DNR 202L and plug it into your computer to review recorded video This section will guide you thrugh the easy to use HDD Viewer Setup Wizard Step 1 HOD Viewer 105 Seu Attach the hard disk containing the DNR 202L video recordings you wish to view Welcome to the HDD Viewer 1 0 5 to your computer N Setup Wizard This wizard will guide you through the installation of HDD Viewer 1 0 5 Itis recommended that you cose all other applications before starting Setup This will make it possible to update relevant system files without having to reboot your Step 2 Open your web browser and go to http www mydlink com support Click on the Storage tab and then select the DNR 202L from the row of products Click on the link to download the HDD Viewer Setup Wizard Completing the HDD Viewer 1 0 5 Step 3 a Setup Wizard HDD Viewer 1 0 5 has been installed on your co
23. ached You can tap Cancel to cancel the operation When watching video in four grid view tap the e mail button to capture a snapshot of all the channels All the snapshots will be inserted into a single e mail Complete the To Cc Bcc fields as required Tap Send to send the e mail with snapshots attached You can tap Cancel to cancel the operation Video Playback The video playback function is only available in single view mode Tap the screen once and you will see the button control bar Tap the Open Recording button FAD on the left side of the button control bar to bring up the Playback selection panel Use the Playback selection panel to scroll through your video recordings archive Scroll to select the Date and Time of the recording you wish to view and tap Play Note Times with video recordings available for playback will be highlighted in red D Link DNR 202L User Manual Start Time Time Interval Minutes Play 35 Section 4 mydlink View NVR Video Playback Control While the video recording is playing in single channel mode tap the playback amp DNR 202L Mi E sien b man ka F d fa T og control button T to control the direction of the video playback The three control buttons are 1 Rewind for one second 0 2 Play pause toggle M 3 Step forward for one second 16 14 01 fj E Use speed control buttons ESF to adjust the spe
24. actual purchase price paid that is attributable to the Software Except as otherwise agreed by D Link in writing the replacement Software is provided only to the original licensee and is subject to the terms and conditions of the license granted by D Link for the Software Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions If a material non conformance is incapable of correction or if D Link determines in its sole discretion that it is not practical to replace the non conforming Software the price paid by the original licensee for the non conforming Software will be refunded by D Link provided that the non conforming Software and all copies thereof is first returned to D Link The license granted respecting any Software for which a refund is given automatically terminates Non Applicability of Warranty The Limited Warranty provided hereunder for Hardware and Software portions of D Link s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case the product is being sold As Is without any warranty whatsoever including without limitation the Limited Warranty as described herein notwithstanding anything stated h
25. anual Video PlaybaCk ssessesssessesseeseesseosesssessesseessesseoseessessesseess 35 Video Playback Control ssesssessesssessesseeseessessesssessesseess 36 CONTA ON aaa EAA E EEE 37 Using the Configuration Interface 37 Live Video sesseseesessessesseseeseesessesseseeseesessesseseeseeseoseseeseesessesses 38 PAY ACK P O E T 40 Search RecordingS essesseseesessesseseeseesesseseeseesessesseseeseess 42 Save Recording tO AVl sseesessesseseeseesesseseeseesessesseseeseese 44 Save SNnapShOt eesseseesesseseesesreseeseseesesseseeseseosessesessesessesees 45 Print Snapshot sesseseeseseeseesessesesseseesesseseoseseosessesesseseeseseess 45 U A EEE 46 Network SetUp seesseseseeseesessesessesresesseseosessosessesesreseeseseess 49 Add CamMera eessessessesessessessesseseesesseseeseesessesseseeseesessesseseeses 50 Audio and Video essessessessesessesseseescesessesseseeseesessesseseeses 51 AAE D AR i o PE E E E 52 Time and Date SetUp sseesessessesessesessesseseesesesseseeseseese 53 MaintenanCe s sesesesessseesesesesesesesesesesesressseseseseseseseseseoeseeses 54 User Management esesessesesesesesesrersroreesresesesesesesesesses 54 SYO E E A E E A 55 Firmware Update eeseeseesesresesreseesessessoseseosessesesreseeseseess 56 Hard Drive Configuration sseseessessesressesressessessessessess 57 LATS A E E EE T 58 EEEE E E A E E 58 VEON ID De E EEE 59 Eaa E AA A AATE texas 60 SUDDO eeaeee r EEA 61 L
26. capability is what makes the DNR 202L an excellent video recording solution Note A computer is required for downloading and using the Setup Wizard You can later access the video with your mobile device s Minimum Requirements Computer with e Microsoft Windows 8 7 Vista XP SP 2 or Mac OS X 10 5 Pentium 4 2 4 GHz or above at least 512MB RAM e Internet Explorer 8 Firefox Chrome or Safari 5 For Inernet Access e Cable or DSL Modem e Broadband Internet Connection For Mobile Apps e mydlink View NVR app requires iOS 5 1 1 and above or Android 4 01 and above For Storage e External USB Hard Drive s D Link DNR 202L User Manual 6 Section 1 Product Overview Features Comprehensive IP Surveillance Solution 1 Total Solution The D Link DNR 202L is a Network Video Recorder NVR capable of 24 7 recording without requiring a dedicated PC The DNR 202L can manage multiple network cameras providing direct access to view live video or play recorded video using a web browser from anywhere anytime The device itself is light weight and compact Easy to Use A user friendly GUI simplifies network and camera setup allowing users to easily access multiple cameras for configuration viewing recording and playback purposes Centralized Interface for Configuration The DNR 202L provides a flexible and economic solution for managing and configuring multiple network cameras on a centralized web interface Megap
27. ck on the link to the right of the Model name to connect to the web page for the selected network camera for advanced setup For example motion detection should be configured via the camera web interface to enable the NVR to receive the trigger message Step 3 Click the Save Setting button Note The system will adjust the frame rate automatically based on the maximum frame rate which that camera can support D Link DNR 202L User Manual Go to Web Go to Web 51 Section 5 Configuration Event Setup This page is where you specify how you would like to receive event notifications from your DNR 202L An event can be triggered by various sources such as motion detection or digitial input When an event is triggered a specified action will be performed Enable Email Account Check this box if you would like to receive event notifications via e mail Email addresses Enter the configuration for the email server account These settings are specific o a CEAN to your e mail provider Ea e Helpful ints Network Setup This step allows you to specify how you will receive event notifications from your NVR You may This se Pe E choose not to receive notifications or to receive notifications via e mail Motion This option allows you to receive notifications when motion is detected during TEE Save Setting Dont Save Setting your NR i i i i mail Account Enter the camera live video monitoring aaa FAIL ACCOUNT uae coe
28. ction The default selection DHCP obtains IP address information automatically from your ISP Internet Service Provider Select Static IP to manually enter your IP address information provided by your ISP or if you prefer to set a static address within your home network After you enter the required configuration information click Next to continue Note You can select DHCP if you are unsure of which settings to choose D Link DNR 202L User Manual Install NVR Setup NVR Install NVR Setup NVR r E B mydlink Setup Wizard Ea DNR 202L Setup Wizard Setup HDD for NVR Physical Disk Information no Model Name Total Capacity iv z PHD 715402 MB p Iv 2 Toshiba 953868 MB Important Notice The next step will format your HDD so all existing data will be erased If you don t want to change the HDD configuration please skip this step Copyright 2013 D Link Corporation Inc All rights reserved DNR 202L Setup Wizard Setup your Internet connection What type of Internet connection do you have DHCP Default C Static IP IP Address 192 168 0 117 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 Primary DNS 192 168 0 1 Secondary DNS 0 0 0 0 Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved 12 Section 2 Assembly and Installation Step 7 To us
29. ded to set up a password for all of your cameras Found 3 camera s 1 Q b rv DCS 5222L 192 168 0 15 admin Vo 2 DCS 933L 192 168 0 14 admin iv 3 DCS 931L 192 168 0 13 admin Secured Click to enter the password for the camera Q unsecured Click to setup a new password to secure camera Rescan Next gt eader About Exit Copyright 2013 D Link Corporation Inc All rights reserved e a Ee E mydlink Setup Wizard i a ae Fes y Password Cancel Save 14 Section 2 Assembly and Installation You can preview each camera by clicking on the green camera icon in the last column of the camera list When finished with the preview click on Close Click Next to continue DCS 5222L 192 168 0 15 Close Step 9 DEEN Your NVR setup is complete You can click on Go to NVR for further configuration EAM DNR 202 Setup Wizard To review your options refer to Using the Configuration Interface on page 37 Install Setup is complete or click Finish Your NVR is now ready to use Setup NVR Click on Go to NVR to adjust additional NVR settings NVR Information 3 Internet Connection DHCP Complete IP Address 192 168 0 117 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 Primary DNS 192 168 0 1 Secondary DNS 0 0 0 0 mydlink l Save a shortcut to mydlink on the Desktop Click on Finish to close the Setup Wizard Troubleshooting Support HDD Viewer Manual Quick Guide
30. e adequate measures D Link DNR 202L User Manual 70 Appendix D Warranty FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help For detailed warranty information applicable to products purchased outside the United States please contact the corresponding local D Link office D Link DNR 202L User Manual 71 Appendix E Registration Registration Register your product online at registration dlink com Product registratio
31. e fifty states of the United States the District of Columbia U S Possessions or Protectorates U S Military Installations or addresses with an APO or FPO Limited Warranty D Link warrants that the hardware portion of the D Link product described below Hardware will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product for the period set forth below Warranty Period except as otherwise stated herein e One 1 Year Limited Warranty The customer s sole and exclusive remedy and the entire liability of D Link and its suppliers under this Limited Warranty will be at D Link s option to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid Any repair or replacement will be rendered by D Link at an Authorized D Link Service Office The replacement hardware need not be new or have an identical make model or part D Link may at its option replace the defective Hardware or any part thereof with any reconditioned product that D Link reasonably determines is substantially equivalent or superior in all material respects to the defective Hardware Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety 90 days whichever is longer and is subject to the same limitations and exclusions If a material defect is inca
32. e status will be one of the following FAQ Support Language English Y E3 m myd l l n K Welcome chi wang Sign out My Devices My Profile D Link On NVR Info Settings e 44442922 Access A green check mark indicates that your NVR is online and ready to use A yellow exclamation point indicates that your NVR is online but the NVR password has changed You will need to enter your new NVR password to access your NVR again A red cross indicates that your NVR is offline and currently cannot be accessed remotely If your NVR is offline try the following e Check to make sure that the Internet connection to your NVR is working properly e Try restarting your router e Check your NVR s cable connections and make sure they are secure e Check to make sure that the LED on your NVR is lit solid blue If you still cannot access your NVR reset your NVR and run the Setup Wizard again from http www mydlink com support Refer to Software Installation on page 10 D Link DNR 202L User Manual 24 Section 3 mydlink Portal Settings Click on the Settings tab to see General Information about your NVR My Devices My Profile DNR 202L NVR Info Settings 44442922 General Information NVR Name DNR 202L mydlink No 44449922 Model Name DNR 202L MAC FO 7D680FE4DE NVR activated on 2013 06 04 20 05 13 More Settings You can remove your DNR 202L from your account by clicking the D
33. e the mydlink Cloud Services you must have an account The Setup Wizard will guide you through the process of connecting your NVR to a mydlink account If you already have a mydlink account enter your E mail address and Password and click Next to continue Skip to the instructions on the next page Otherwise select No I need to sign up for a new account and enter the required information Note To learn more about free mydlink Cloud services visit www mydlink com Click Next to continue D Link DNR 202L User Manual A N SS _ mydlink Setup Wizard s DNR 202L Setup Wizard Install Let s add your NVR to your mydlink SEESE HUR account Setup Adding your NVR to your mydlink com account will allow you to access your NVR through NVR the Internet Do you have a mydlink account Yes I already have a mydlink account C No I need to sign up for a new account 1 don t want to sign up right now Please enter your mydlink signin E mail address and password E mail Password Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved P mydlink Setup Wizer x a DNR 202L Setup Wizard my Install Let s add your NVR to your mydlink stole account Setup Adding your NVR to your mydlink com account will allow you to access your NVR through NVR the Internet Do
34. ed of video playback from real time through to 32x speed Note The quality of display will vary according to network bandwidth availability D Link DNR 202L User Manual 36 Section 5 Configuration Configuration Using the Configuration Interface After completing the Setup Wizard you are ready to use your NVR The NVR s built in web configuration utility is designed to allow you to easily access and configure your DNR 202L Step 1 o After initial setup when the Setup is Complete you have the option to Go to raien NVR to adjust additional NVR settings Click on Go to NVR or write down the Install Setup is complete IP Address of the NVR so you can later enter it into a web browser to open the Setup ine configuration interface WUR Dnormations 3 Complete a eae 117 mydlink l Save a shortcut to mydlink on the Desktop Click on Finish to close the Setup Wizard Step 2 Log in to access the configuration interface User name is Admin If you did not e E A The server 192 168 0 101 at DNR 202L requires a username and password create a password in the Setup Wizard the password is blank by default Click OK m Admin F eeeeee Remember my credentials D Link DNR 202L User Manual 37 Section 5 Configuration Live Video This screen shows the NVR s Live Video feeds You may select an icon described in the list below to operate whichever camera is selected from the list on the
35. elete NVR button Delete NVR Note If you would like to remove your NVR from your mydlink account click on the Delete NVR button and enter your mydlink password Your NVR will be reset to the factory default settings D Link DNR 202L User Manual 25 Section 3 mydlink Portal Live Video After you connect to your NVR the Live Video tab will be selected by default and will display the Live Video feed You can select a specific camera from the drop down list or you can choose to view all the available channels The Live Video controls are described in the table below The Control Pad is used to pan tilt and zoom PTZ a Control Pad PTZ camera live Video Playback Status NVR Info 7 Control Use the plus and minus buttons to zoom in or out Zoom Contro Actual Use this control to view video in it s native resolution w ctual Size Use this control to start stop recording Record Use this option to save a snapshot image ia Save to Image Use this button to toggle the glance mode In glance Glance mode the NVR will cycle briefly through each connected camera D Link DNR 202L User Manual 26 Section 3 mydlink Portal Playback Click the Playback tab to review pre recorded videos The Playback controls are described in the table below aa volume ee Click on this control to open the View Recorded Files window See Search Recordings on page 28 Playback Seeker Use the pla
36. ent and safe location on the network for storing data and media The Setup Wizard will let you adjust basic settings for your device Click Next to begin the Setup Wizard Welcome to the DNR 202L Setup Wizard This wizard will guide you through setting up your Network Video Recorders NVR device Begin by clicking the Next button below 1 Set Password 2 Choose Time Zone 3 Set LAN Connection Type 4 Set Device Information 5 Finish D Link DNR 202L User Manual 46 Section 5 Configuration STEP 1 Enter a Password for your device Click Next to continue STEP 2 Choose your Time Zone from the drop down menu Click Next to continue STEP 3 Choose your network Connection Type Select Static IP if your Internet Service Provider ISP has provided you with connection settings or if you wish to set a static address within your home network Note Select DHCP if you are unsure of which settings to choose Click Next to continue D Link DNR 202L User Manual 1 Set Password Password New Password Confirm Password 2 Choose Time Zone Time Zone GMT 08 00 Pacific Time US amp Canada m 3 Set LAN Connection Type DHCP Static IP IP Address 192 168 0 12 Subnet Mask 255 255 255 0 Gateway 192 168 0 1 DNS1 192 168 0 1 DNS2 0 0 0 0 Enable DHCP Server DHCP IP Address Range 0 0 0 0 to 0 0 0 0 DHCP Lease Time 1 Hour Section 5 Configuration STEP 4 Enter a Name for your device
37. eo recording Use the slider to adjust the playback volume Use this button to close the application Close Application Minimize Use this button to minimize the application Application D Link DNR 202L User Manual 21 Section 2 Assembly and Installation Search Recordings From HDD Viewer application click the Open Recording Search button to access the Date Time Searching window to locate the video recordings that you would like to review 1 aa Time Period Video Preview Cle Start Time 2013 0802 00 00 00 E 7 Enable Preview SOM TO WT F S End Time 2913 0802 23 59 59 E 2 4A 5 6 7 it 11 12 13 14 15 16 I 18 19 20 21 22 23 24 25 26 27 28 29 30 31 5 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 A _S T m E Record on Event 7 E Record Always 1 Select Folder Use this button to navigate to your video recordings folder The default folder name is avdata on your USB hard disk Select the year month and day of the recording you wish to view Dates n Ar l i i 2 lige Pare ERON ANE with recordings available for playback are highlighted blue or red 3 Time Range Selection Select a Start Time and End Time for the recording you wish to view 4 Video Preview When Enable Preview is checked this area will display a preview 5 Timeline This timeline will adjust according to the level of zoom selected 6 Available Streams
38. erein to the contrary Submitting A Claim USA The customer shall return the product to the original purchase point based on its return policy In case the return policy period has expired and the product is within warranty the customer shall submit a claim to D Link as outlined below e The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D Link to confirm the same along with proof of purchase of the product such as a copy of the dated purchase invoice for the product if the product is not registered e The customer must obtain a Case ID Number from D Link Technical Support at 1 877 453 5465 who will attempt to assist the customer in resolving any suspected defects with the product If the product is considered defective the customer must obtain a Return Material Authorization RMA number by completing the RMA form and entering the assigned Case ID Number at https rma dlink com D Link DNR 202L User Manual 67 Appendix D Warranty e After an RMA number is issued the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit and the RMA number must be prominently marked on the outside of the package Do not include any manuals or accessories in the shipping package D Link will only replace the defective portion of the product and wil
39. ff LIVE VIDEO SETUP MAINTENANCE STATUS HELP Kalaa cae Click the Cue In or Cue Out button to set the start Cue In Cue Out phe a and end points for the video you are reviewing Step Forward Click to pause the playback and move to next frame Reverse or previous frame OD Zoom In Zoom Out Click to Zoom In or Zoom Out D Link DNR 202L User Manual 41 Section 5 Configuration Search Recordings From the Playback page click the Open Recording button to access the View Recorded Files window and select the video recordings you would like to review Step by step instructions are on the next page 06 2013 Date Time Period Video Preview S M T T F 85 Start Time o6706 2013 15 06 25 Enable Preview 1 z a ee e a a End Time 06 06 2013 19 36 25 9 10 11 12 13 14 1b a 16 17 18 19 20 21 22 23 4 25 26 ef 26 29 30 MT ay i hh at arts Toop oot y eat o 01 02 03 04 05 O06 O07 08 11 12 1 2 23 DCS 932L Hil Gli Gi i HG GHG 2 Hil Gl i EEN PEE RNET 7 DCS 7010L Wanmannnnnaananma DCS 942L DCS 2132L E L a a S D O A m Record on Event E Record Always 1 Date telecon dies Select the year month and day of the recording you wish to view Dates with recordings available for playback are highlighted 2 Time Period Selection Select a Start Time and End Time for the recording you wish to view 3 Video Preview When Enable Previe
40. gin Step 2 Accept the End User Licence Agreement and follow the on screen prompts The Setup Wizard allows you to click on the Back arrow to review a previous step or click on the Next arrow to proceed D Link DNR 202L User Manual DNR 202L Setup Wizard Welcome to the D Link NVR DNR 202L Setup Wizard This wizard will guide you through the setup of your D Link NVR device NOTE Ensure that cameras have been installed on the network before initiating the DNR 202L Setup Wizard Select your Language English v Skip the Setup Wizard if you are adding cameras to a system that has already been configured Skip gt Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved nk Setup Wizard a fp mydli ieee Y DNR 202L Setup Wizard Connect your device 1 a Connect USB storage b Connect Ethernet cable to the 2 The LED on the top of the NVR will turn blue when the device is ready NVR and the router c Connect power adapter to NVR o What should I do if the LED stays red EE Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Reader About Exit Copyright 2013 D Link Corporation Inc All rights reserved 10 Section 2 Assembly and Installation Step 3 Select your NVR from the list then click Next If you have multiple
41. gment have been subjected to abuse accident alteration modification tampering negligence misuse faulty installation lack of reasonable care repair or service in any way that is not contemplated in the documentation for the product or if the model or serial number has been altered tampered with defaced or removed Initial installation installation and removal of the product for repair and shipping costs Operational adjustments covered in the operating manual for the product and normal maintenance Damage that occurs in shipment due to act of God failures due to power surge and cosmetic damage Any hardware software firmware or other products or services provided by anyone other than D Link and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product While necessary maintenance or repairs on your Product can be performed by any company we recommend that you use only an Authorized D Link Service Office Improper or incorrectly performed maintenance or repair voids this Limited Warranty Disclaimer of Other Warranties EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN THE PRODUCT IS PROVIDED AS IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IF ANY IMPLIED WARRA
42. ixel Resolution Support The major advantage of digital over analog video is its higher resolution The DNR 202L supports high resolution megapixel recording for sharper images with high clarity Empowered by mydlink technology The DNR 202L can be easily setup for Internet access to your personal account at mydlink com It supports real time monitoring and playback from anywhere using any Internet connected computer iPhone iPad or Android device Powerful Event Management 1 Camera Status The camera status page displays connection recording frame rate and bit rate information for each camera Meanwhile the estimated available recording time is also available for quick reference 2 Flexible Event Management Event setup is another key feature of the DNR 202L The NVR can monitor all of the cameras for motion detection The NVR centrally controls the e mail notifications and recording from all connected cameras Instant Live View 1 Full Screen Enlarge the display to full screen for live view and recorded video 2 Camera Name and Status on OSD Camera name and recording status are displayed via OSD to aid in identification 3 PTZ Audio Support Users can control pan tilt zoom PTZ functions from within the interface using the provided interface buttons 4 Preset Point Presets from within the interface can be set to instantly restore a previously saved viewpoint 5 Digital Zoom Videos can be enlarged by using digital zoom Intelligen
43. l 68 Appendix D Warranty e The customer is responsible for all in bound shipping charges to D Link No Cash on Delivery COD is allowed Products sent COD will be rejected by D Link Products shall be fully insured by the customer and shipped to D Link Networks Inc 2525 Meadowvale Boulevard Mississauga Ontario L5N 5S2 Canada D Link will not be held responsible for any packages that are lost in transit to D Link The repaired or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D Link Return shipping charges shall be prepaid by D Link if you use an address in Canada otherwise we will ship the product to you freight collect Expedited shipping is available upon request and provided shipping charges are prepaid by the customer D Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements or for which an RMA number is not visible from the outside of the package The product owner agrees to pay D Link s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements or that is determined by D Link not to be defective or non conforming e RMA phone number 1 800 361 5265 Hours of Operation Monday Friday 9 00AM 9 00PM EST What Is Not Covered The Limited Warranty provided herein by D Link does not cover Products that in D Link s jud
44. l not ship back any accessories The customer is responsible for all in bound shipping charges to D Link No Cash on Delivery COD is allowed Products sent COD will either be rejected by D Link or become the property of D Link Products shall be fully insured by the customer and shipped to D Link Systems Inc 17595 Mt Herrmann Fountain Valley CA 92708 D Link will not be held responsible for any packages that are lost in transit to D Link The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D Link Return shipping charges shall be prepaid by D Link if you use an address in the United States otherwise we will ship the product to you freight collect Expedited shipping is available upon request and provided shipping charges are prepaid by the customer D Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements or for which an RMA number is not visible from the outside of the package The product owner agrees to pay D Link s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements or that is determined by D Link not to be defective or non conforming Submitting A Claim Canada The customer shall return the product to the original purchase point based on its return policy In case the return policy period has expired and the produc
45. mputer Follow the on screen prompts to install the software You will see a message that says HDD Viewer has been installed on your computer Click Finish to dose this wizard Run HDD Viewer 1 0 5 Make sure the box is checked by Run HDD Viewer Click Finish to close the HDD Viewer Setup Wizard D Link DNR 202L User Manual 20 Section 2 Assembly and Installation HDD Viewer Software Interface The HDD Viewer application enables you to view search and backup your recorded videos from a simple interface using your computer The interface controls are described below Open Recording Use this button for the Open Recording Search Refer Search Menu to Search Recordings on page 22 Display Sinale feed Use this button to switch to a single camera feed in ial al the video display area Use this button to switch to a 2 x 2 camera feed in Display 2 x 2 feed l the video display area Actual Size Use this button to display the video recording in it s native resolution Use this button to switch to a full screen view of the Full Screen video recording On Screen Display Use this button to configure the various settings for Settings the On Screen Display Save as AVI Use this button to export the video as an AVI file Print Image Use option this to print a still image Use this option to save a still image Image Use this option to apply image enhancements Enhancement Backup Data Use this option to make a backup of your vid
46. n is entirely voluntary and failure to complete or return this form will not diminish your warranty rights Version 1 0 August 19 2013 D Link DNR 202L User Manual 72
47. nable Preview is checked this area will display a preview 4 Timeline This timeline will adjust according to the level of zoom selected 5 Available Streams This area lists the recording devices available 6 Zoom Slider Use the zoom slider control to zoom in and out of the timeline Available Recordings Recordings are graphed below the timeline Blue bars indicate an event was recorded Red bars indicate the camera is set to always record 8 Selected Period Click within the timeline to select a recording period D Link DNR 202L User Manual 28 Section 3 mydlink Portal Status Click the Status tab to view both Disk Status and Camera Status for devices connected to the NVR Name This shows the name given to the USB storage device attached to the USB1 or USB2 port Total Hard Drive Capacity This shows the total amount of storage space available on the USB storage device attached to the USB1 or USB2 Port Used Space This shows the currently used storage space of the USB storage device attached to the USB1or USB2 Port Unused Space This shows the amount of space available for recording on the USB storage device attached to the USB1 or USB2 Port Status This shows if the USB storage device attached to the USB1or USB2 port is currently being recorded to Click the Camera Status heading to view the status of the cameras connected to the NVR D Link DNR 202L User Manual Live Video Playback Status
48. nal Drives Step 1 Place the DNR 202L on a non slip flat surface Step 2 Connect the provided power adaptor to the DNR 202L Plug the power adapter into a wall outlet or power strip Step 3 Attach one end of the provided Ethernet cable to the Ethernet port on the NVR Attach the other end to your network The DNR 202L will test for an Internet connection When an Internet connection is established the Power amp Network LED on the top of the NVR will start blinking Note If you do not connect an Ethernet cable the DNR 202L will beep Step 4 Attach an external USB HDD to the USB HDD1 port The NVR will mount the HDD and beep once Note When you want to remove an HDD press and hold the HDD release button for at least three seconds The NVR will release the HDD and emit a long beep You can now unplug the USB cable D Link DNR 202L User Manual Section 2 Assembly and Installation Software Installation Step 1 Open your web browser and go to http www mydlink com support Click on the Storage tab and then select the DNR 202L from the row of products From the Wizard column select a link to the preferred Setup Wizard Note Make sure your cameras have been installed on the network before starting the Wizard Windows Users Click the Start button to launch the Setup Wizard Mac OS X Users Double click the DNR 202L Setuup Wizard file to start the Setup Wizard When the wizard appears cick the Start button to be
49. ng glass icons at the bottom left of the screen Step 6 Click OK to begin playback D Link DNR 202L User Manual Video Preview 06 2013 Date Time Period Start Time 96 06 2013 15 06 25 V Enable Preview 1 a PCI ea gs BP End Time 96 06 2013 19 36 25 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 DCS 932L DCS 7010L e DCS 942L DCS 2132L 4 EAA EN es ii Pi m Record on Event m Record Always pa aa aa ejs 43 Section 5 Configuration Save Recording to AVI There may be video recorded by your camera during a specific time period that you would like to save You can search and playback following the steps on the previous page After determining which video recording s you would like to save you can export the video clip in AVI format as described below Step 1 During playback users can selelct the camera from which they would like to save gt ap a video clip Step 2 Set the Cue In and Cue Out points the cue in and cue out time will be shown on the information window Then click the Save Video button Step 3 Click on Browser and choose the folder where you would like to save the file Step 4 Input the file name and click the Save button Step 5 Select the Export Format Step 6 Click the OK button D Link DNR 202L User Manual F ood ma Export Setting Expo
50. ngle channel video and tap on the PTZ button EE The Pan Tilt Control panel will appear Tap on the PTZ button again when you want to to disable the Pan Tilt Control panel 1 Pan Tilt Control Tap on the directional arrows to pan and tilt the camera 2 Zoom Pinch zoom by moving finger and thumb together or apart Note The PTZ control function must be enabled on the camera connected to the DNR 202L in order for mydlink View NVR to control the PTZ function See Live Video on page 38 for more information 3 Video Stretch In Live View or Playback mode tap on the video Stretch button Wto expand the video to full screen Tap the button again to disable Stretch Note This function may alter the aspect ratio of the video 4 Snapshot E While streaming in single channel mode tap the Snapshot button Sto capture an image The image will be saved to the device s picture storage area When viewing video in four grid view tap the Snapshot button to take snapshots of all the channels These images will be saved to the device s camera roll Note The saved snapshot s will be at the original resolution of the IP camera video D Link DNR 202L User Manual 34 Section 4 mydlink View NVR 5 E Mail While streaming in single channel mode tap the e mail button 2 to capture a snapshot and insert it into an e mail Complete the To Cc Bcc fields as required Tap Send to send the e mail with the snapshot att
51. ond Echo IP Camera found 1 beep for 1st camera found 2 beeps for 2nd 3 beeps for 3rd 4 beeps for 4th Buzzer will beep short Reset button Press reset pin for 10 seconds Reset to factory default Buzzer will beep long D Link DNR 202L User Manual Appendix B Technical Specifications Technical Specifications Technical Specifications Network Video Recorder Video Management e Schedule Manual Event Motion e Continuous Play Stop Pause Forward Backward Next Previous Network Physical Interface e RJ45 10 100 LAN Ethernet auto MDI MDIX Network Protocols e IPV4 ARP TCP UDP ICMP e DHCP Client e DNS Client e HTTP Server e HTTPS e SMTP Security User Management e Adminstrator password authentication Automatic Logoff e Idle user timeout on configuration pages D Link DNR 202L User Manual 63 Appendix B Technical Specifications System System Requirements e Microsoft Windows 8 7 Vista or XP SP2 e Mac OS X 10 5 or higher hr Browser Requirements e Internet Explorer 8 or higher e Firefox Chrome Safari 5 or higher Mobile Support e Android 4 01 and above e IOS 5 1 1 and above Remote Management e Remote live view and playback via web browser e Configuration interface accessible via web browser System Log e Status of active users e Login history Certifications CE e CE LVD e FCC e C Tick Physical Weight External Power Adapter e Input 5V DC 3A e
52. or your NVA device Save Setong Don t Save Setting DHCP IP Address Range 0 0 0 0 DHCP Lease Time 1 Hour Section 5 Configuration Add Camera Step 1 Under Camera Search click the Search button to search for UPnP cameras The addresses Vendor and Model names of all the available cameras will appear below the Camera Search p MMMAMESTSTSMMRETTSETSI sso TST ZS Helpful Hints heading Click the icon to add a camera into your Camera List ee a Note If a cameras is already on the Camera List it will be listed in red below the Camera Search EZER om creaire Acres Vendor sot an heading ee ae oe DCS 5222L 192 168 0 6 D Link DCS 5222L None Step 2 After clicking the icon the Camera Setting window will appear None None None 1 2 3 4 5 6 7 8 Step 3 CAMERA SEARCH Enter the Camera Name Administrator Name and Password for the camera Address MAC Model 192 168 0 5 f0 7d 68 06 e0 5c Li DCS 932L gt 192 168 0 3 f0 7d 68 07 df ae Li DCS 942L Note e Some cameras will limit the login authority to the administrator only To add cameras without the UPnP function click None or the space in between lines under the Camera Name heading in the Camera List The Camera Setup menu will appear Enter the IP Address manually e You may not beable to see all the cameras on your first search It may take a moment for the devices gt 192 168 0 6 f0 7d 68 0c ca c4 Li DCS 5222L Page 1 1
53. pable of correction or if D Link determines that it is not practical to repair or replace the defective Hardware the actual price paid by the original purchaser for the defective Hardware will be refunded by D Link upon return to D Link of the defective Hardware All Hardware or part thereof that is replaced by D Link or for which the purchase price is refunded Shall become the property of D Link upon replacement or refund D Link DNR 202L User Manual 66 Appendix D Warranty Limited Software Warranty D Link warrants that the software portion of the product Software will substantially conform to D Link s then current functional specifications for the Software as set forth in the applicable documentation from the date of original retail purchase of the Software for a period of ninety 90 days Software Warranty Period provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation D Link further warrants that during the Software Warranty Period the magnetic media on which D Link delivers the Software will be free of physical defects The customer s sole and exclusive remedy and the entire liability of D Link and its suppliers under this Limited Warranty will be at D Link s option to replace the non conforming Software or defective media with software that substantially conforms to D Link s functional specifications for the Software or to refund the portion of the
54. r File Path Browser Export Format AVI Microsoft Video 1 7 Enable Watermark Start Time 2013 6 12 18 57 51 End Time 201 3 6 12 19 03 04 Video Quality me 44 Section 5 Configuration Save Snapshot Step 1 During playback users can save an image from a selected camera Step 2 Users can click on the Image Enhancement button to adjust the output of the image The Image Enhancement window has sliders for adjustment of Brightness and Contrast Image Enhancement Image Setting M Brightness Step 3 Click the Save Image button when the desired image appears on the screen M Contrast Step 4 Click the Save Image button again to select the folder where you would like to save the file fr Gray Default OK Step 5 Choose the desired image format Step 6 3 Enter the file name Step 7 Click the Save button Print Snapshot Step 1 During playback user can print a selected image Playback video to select an image Step 2 Click the Print button when the desired image appears on the screen Step 3 Select the desired print settings D Link DNR 202L User Manual 45 Section 5 Configuration Setup Click the Setup tab if you want to adjust basic settings using the Setup Wizard Click Run Wizard to launch the Setup Wizard ona 202 P evox raven SSM vvswrenance TO searus wear The DNR 202L Network Storage provides a conveni
55. s 2027 61 kbps Frame RateZDisplays the frame rate of the camera DCS 932L 192 168 0 5 Connected No Record 15fps 1486 99 kbps Bit seca ye the ssion Fra m e Rate Di S p ays th e fra m e rate of th e Ca mM e ra e DCS 5222L 192 168 0 6 Connected No Record 30 fps 2047 58 kbps z camera None None No Record 0 fps 0 00 kbps Bit Rate Displays the transmission bit rate of the camera Note If the Frame Rate or Bit Rate is too low check the your network configuration between cameras and NVR If the bit rate is too high it will cause the Live Video display to slow down or lag You should modify the quality or bit rate setting in the camera web GUI accordingly D Link DNR 202L User Manual 58 Section 5 Configuration System Info This page displays a summary information about your DNR 202L LAN Displays the local network settings of the NVR including PAddress Information Subnet Mask and Mac Address Device Displays the device Name Current RX TX and System Up Time of Information the NVR Volume Displays the hard drive information including the Name disk mode Information Total Hard Drive Capacity Used Space and Unused drive space as well as the drive Status D Link DNR 202L User Manual I LIVE VIDEO PLAYBACK SETUP MAINTENANCE STATUS HELP Camera Status ste View a summary of the device information here Or og Ou LAN INFORMATION 192 168 0 4 255 255 255 0 192 168 0 1 ress F0 7D 68 0F E5 0C DNS1
56. sesesesessesseesesesesesesesesesssscsesesesesessseseces 6 Minimum Requirements esesesesesesesesesesesersesressesesesesesesess 6 ELEU GS A E E AA EE EE A E 7 Hardware OverviewW s sesesesssessesesesesesesesesesssseseseseseseseseees 8 Assembly and Installation sesssessesseeseessessesssessesseeseesseoseossess 9 Attaching External Drives ssessesessessessessesessessessesseseesesss 9 Software Installation s sessesssesesessesesesessesssesessssesesesessess 10 Adding Cameras After Initial SetUp eseseseesesseesesee 16 HDD Viewer Software Installation s sesessesesesesessese 20 HDD Viewer Software Interface seesesesessesesesesessese 21 Search RecordingS ssesessessessessesessessessessesesseesesseseeseese 22 mydlink Portal seeseessessessessesseseessessesscssessessessessessessessessessessesse 23 NVR Status ICONS eseeneseseeseseseesessssesesessesesossesesossesesceseseses 24 SUNS e E E EE R 25 Live Video sesesessssesssesesesesesesesesssessesesesesesesesecesecsesesesesesesesee 26 AEDE E E E 27 Search RecordingS sesseseeseesessesseseeseesesseseeseesessesseseeseess 28 DCA S ee E EAA 29 NVR NIO ccsoesnssiaiennr serienr E AEn 30 mydlink View NVR APP ssessessessessessessessessessessessessessessessesse 31 First Use of mydlink View NVR s ssesssesssessesssesseesseeseesse 32 LIVE VIEW cccusccenssasicevetsiconseesaessesyesesuticsvessaceevecsseaes E 32 D Link DNR 202L User M
57. sword Click Camera Search to continue D Link DNR 202L User Manual Install NVR Setup NVR Install NVR Setup NVR DNR 202L Setup Wizard Select your device DOGGE E DNR 202L 192 168 0 12 F0 7D 68 0F E5 0C DHCP Not registered B Registered with mydlin Check the MAC Address on the back of your NVR to choose which NVR you v nt to setup Rescan Copyright 2013 D Link Corporation Inc All rights reserved DNR 202L Setup Wizard Confirm your NVR password Please enter a password to secure your NVR Admin ID Password PO I want to change the password Forgot your NVR password To add additional cameras after initial setup Camera Search Troubleshooting Support HDD Viewer Manual Quick Guide Adobe Copyright 2013 D Link Corporation Inc All rights reserved 17 Section 2 Assembly and Installation Step 5 The wizard will automatically search for and then list all available cameras in your network including any cameras you have added If a camera is registered with mydlink the camera password is verified If the camera was not registered with mydlink and you see a red question mark 2 it means the camera has been secured Click on the red question mark to enter your camera password If you see a red exclamation point it means the camera is unsecured Create a password for the camera Click Next to continue Note It is strongly advised that you set up pass
58. t Playback 1 AVI Output During playback if you see video that needs to be exported you can easily export video in the convenient AVI format 2 Playback Speed Control Playback speed control allows for up to 32x speed fast forward or fast backward play The step playback option displays one frame at a time 3 Image Enhancement Users can enhance the recorded video with controls such as brightness contrast and sharpness 4 Print Picture If a printer is connected to the user s PC the NVR can also print the selected still image D Link DNR 202L User Manual 7 Section 1 Product Overview Right View Hardware Overview Rear View D Link DNR 202L User Manual 1 Power Receptor Connect the provided power adaptor 2 Ethernet Port Connect one end of the provided Ethernet cable 3 USB Port for HDD 1 Attach an external USB Hard Disk HDD to this port to save recorded streams 4 HDD 1 Release Button Press this button to release the HDD attached to the USB Port for HDD 1 5 USB Port for HDD 2 Attach an external USB HDD to this port to save recorded streams 6 HDD 2 Release Button Press this button to release the HDD attached to the USB Port for HDD 2 7 Auto Scan Key Press this button to automatically scan for cameras on the network 3 Reset Button he rast z ies ad i omen recessed button for 10 seconds to reset Section 2 Assembly and Installation Assembly and Installation Attaching Exter
59. t is within warranty the customer shall submit a claim to D Link as outlined below e Customers need to provide their receipt proof of purchase even if the product is registered Without a receipt no warranty service will be done The registration is not considered a proof of purchase e The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D Link to confirm the same along with proof of purchase of the product such as a copy of the dated purchase invoice for the product if the product is not registered e The customer must obtain a Case ID Number from D Link Technical Support at 1 800 361 5265 who will attempt to assist the customer in resolving any suspected defects with the product If the product is considered defective the customer must obtain a Return Material Authorization RMA number by completing the RMA form and entering the assigned Case ID Number at https rma dlink ca e After an RMA number is issued the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit and the RMA number must be prominently marked on the outside of the package Do not include any manuals or accessories in the shipping package D Link will only replace the defective portion of the product and will not ship back any accessories D Link DNR 202L User Manua
60. ttings can be saved as a file onto the local hard drive The saved file can be uploaded into the unit Save Click Save so that all the configuration settings can be saved as a file Load Usercan restore the configuration from a file after resetting to factory default DEFAULTS eer Configuration Click the Browse button to select the configuration file and restore it by lac eo clicking the Load button re camera to NV automatically Save Configuration Settings Load Configuration Settings Idle Time When an adminstrator enters any of the Setup pages except the Live Video IDLE TINE and Playback pages the NVR will count the idle time where the user is inactive After the idle time exceeds a specified period of time the NVR will force the user to logout and request login authentication again for security AUTO PLUG AND PLAY Enable Auto Plugin Specify the period of idle time here in minutes Buzzer Click On to enable buzzer or Off to disable See LED and Alarm Overview on page 62 Enable Auto Click Enable Auto Plugin to enable the device to automatically add verified Plugin cameras found on the network D Link DNR 202L User Manual 55 Section 5 Configuration Firmware Update You can update the firmware for your DNR 202L from this page It is recommended you keep your firmware up to date for improved performance of the device Click on the D Link Support Page link to check for the latest available firmware
61. upper right side of the Live Video screen Recording Toggle Use this button to start stop recording When the camera is recording this indicator will change color On Screen Display Use this button to configure the various settings for the On Screen 2R OSD ee oa the Live Video SEGA area TE wane ae the Live Video display area Live Video feed Glance Toggle Use this button to toggle glance mode In glance mode the NVR will cycle briefly through each connected camera in z 5 ie a HH a Control Pad The Control Pad is used to pan tilt and zoom PTZ a z PTZ camera WSs stan x Enable camera OSD 7 Foreground Zoom Control Use the plus and minus buttons to zoom in or out com Ma manual focus control Color Bue O EEA e Usethis option to toggle the Preset Path function 1 ame E a eee See Time no hese Be SS poon oam r Agee men D Link DNR 202L User Manual 38 Section 5 Configuration Reject This option allows the user to safely disconnect or unmountan attached HDD Format This option allows the user to format an attached HDD HDD Status The status bar displays the status of attached HDD When no HDD is attached the icon will appear grayed out Information This area will update in real time to display relevant information about Area the selected video feed D Link DNR 202L User Manual UFE Status idle 9 27 used 1 4 GB of 15 5 GB 192 168
62. ur NVR s configuration interface click on the button and enter your user name and password D Link DNR 202L User Manual 30 Section 4 mydlink View NVR mydlink View NVR App Search for mydlink View NVR to download and install the app on your smartphone or tablet when connected to the Internet a pecs clans Available on the gt Google play AppStore System Requirements mydlink View NVR app requires iOS version 5 1 1 or above or Android version 4 01 or above When the download has been completed launch the mydlink View NVR app and log in to your mydlink account Select your DNR 202L from the device list to remotely access the live video from the connected cameras You can also playback recorded videos and manually enable or disable recording DNR 202L D Link DNR 202L User Manual 31 Section 4 mydlink View NVR First Use of mydlink View NVR Before using the mydlink View NVR app for the first time make sure you add your DNR 202L to your mydlink account Then you will be able to view live video from o your DNR 202L and playback your recorded video When you start the mydlink View NVR app your DNR 202L should be displayed in the Device list on the left hand side of the screen Live View F 3 04 DNR 202L Tap on the DNR 202L icon and the mydlink View NVR app will display the Live Video from connected cameras Your viewing options are described on pages that follow
63. w is checked this area will display a preview 4 Timeline This timeline will adjust according to the level of zoom selected 5 Available Streams This area lists the recording devices available 6 Zoom Slider Use the zoom slider control to zoom in and out of the timeline Available Recordings Recordings are graphed below the timeline Blue bars indicate an event was recorded Red bars indicate the camera is set to always record 8 Selected Period Click within the timeline to select a recording period D Link DNR 202L User Manual 42 Section 5 Configuration Step 1 From the date selection area at the top left of the View Recorded Files window select the date s for the recording s you would like to review The dates highlighted on the timetable indicate available recorded video Step 2 Color bars shown in the timeline area differentiate recording types Red indicates the camera is set to Record Always and blue means the camera will only Record on Event This should help with your selection of video clips Step 3 Select a time period using the Start Time and End Time within the Date Time Period Alternatively you can select a range from the timeline Step 4 Select the Enable Preview option for a preview of the video you select Step 5 Highlight the video clip s you would like to review by left clicking and dragging the time period in the timeline area The scale of the timeline can be modified using the magnifyi
64. words for all of your new cameras D Link DNR 202L User Manual DNR 202L Setup Wizard Auto search and add camera s aatas The setup wizard can automatically search and find the available cameras in the network Registered mydlink cameras will be verified automatically Please enter the login credentials into the fields below for the cameras that have not been registered with mydlink It s strongly recommended to set up a password for all of your cameras Found 3 camera s 1 Q b rv DCS 5222L 192 168 0 15 admin Vo 2 DCS 933L 192 168 0 14 admin iv 3 DCS 931L 192 168 0 13 admin Secured Click to enter the password for the camera Q unsecured Click to setup a new password to secure camera Rescan Next gt eader About Exit Copyright 2013 D Link Corporation Inc All rights reserved e a Ee E mydlink Setup Wizard i a ae Fes y Password Cancel Save 18 Section 2 Assembly and Installation Step 6 Your NVR setup is complete You can click on Go to NVR for further configuration iE DNR 2021 Setup Wizard To review your options refer to Using the Configuration Interface on page 37 Install Setup is complete NVR Or click Finish Your NVR is now ready to use Setup NVR Click on Go to NVR to adjust additional NVR settings NVR Information 3 Internet Connection DHCP Complete IP Address 192 168 0 117 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 Primary DN
65. yback seeker to quickly jump to a specific point in the recording padoan n NDEDE e i 3 ca forward by one frame ZiI eo IQQala playback Zoom Zoom Control Use Use the and pbuttonstozoominorout and buttons to zoom in or out Size Use ee control to view video in it s native resolution Save to Image Use this option to save a snapshot image D Link DNR 202L User Manual 27 Section 3 mydlink Portal Search Recordings From the Playback page click on Open Recording to access the View Recorded Files window and select the video recordings that you would like to review 06 2013 Date Time Period Video Preview N Y a en eS Start Time 06706 2013 15 06 25 gt V Enable Preview a 1 2 3 4 5 6 7 8 End Time 06 06 2013 19 36 25 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Prrydtd epee Ly Lig Wee Tee pt Wy a l l l E i 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 DCS 932L en Ll Sl Ena ttt A DCS 7010L i HH DCS 2132L i PTT i Foy F w Record on Event E Record Always 1 Date Selection Area Select the year month and day of the recording you wish to view Dates with recordings available for playback are highlighted blue or red 2 Time Range Selection Select a Start Time and End Time for the recording you wish to view 3 Video Preview When E
66. you have a mydlink account e Yes I already have a mydlink account G No I need to sign up for a new account 1don t want to sign up right now Please enter the following information to sign up for a mydlink account E mail Password Retype Password First Name D Last Name Troubleshooting Support HDD Viewer A Copyright 2013 D Link Corporation Inc All rights reserved 13 Section 2 Assembly and Installation Step 8 The wizard will automatically search for and then list all available cameras in your network Ifa camera is registered with mydlink the camera password is verified If the camera was not registered with mydlink and you see a red question mark it means the camera has been secured Click on the red question mark to enter your camera password If you see a red exclamation point it means the camera is unsecured Create a password for the camera Click Next to continue Note It is strongly advised that you set up passwords for all of your cameras D Link DNR 202L User Manual Install NVR Setup NVR DNR 202L Setup Wizard Auto search and add camera s oe The setup wizard can automatically search and find the available cameras in the network Registered mydlink cameras will be verified automatically Please enter the login credentials into the fields below for the cameras that have not been registered with mydlink It s strongly recommen
Download Pdf Manuals
Related Search
Related Contents
User Manual - CONRAD Produktinfo. Dynamode USB to Serial (RS232) Converter 03・5543-ー870 Model UA-767 A6D/A6DR リコール対応のポイント - 東京海上日動リスクコンサルティング株式会社 TRP-C24H User`s Manual Balluff Transducer Catalog 18 MB Manual de Practicas Untitled - セイコーウオッチ Copyright © All rights reserved.
Failed to retrieve file