Pico Broadcaster - Peerless-AV
Contents
1. MHz commonly known as channels 21 51 Q A Websites such as http www getlation com and http www findlatitudeandlongitude com can be used to find Latitude and Longitude For location searches from a tablet or smart phone the user may use the app Show My White Space from Spectrum Bridge Inc available for Android and iOS Q A Each stream has the ability to carry up to 19 2Mbps Q A When looking at the front of the device the right most light is the Power indicator illuminated when power is applied The center light is the On Air light used to signify the HDS PB100 is operating properly and is in broadcast mode Until the device is registered properly the On Air light will remain off The left most light is the Error light and will illuminate red when there is an error with the device Q A The Antenna can be placed behind the DTV but placement of the HDS PB100 Pico Broadcaster really dictates where the antenna can live The higher up physically that the Pico Broadcaster is mounted the more options you have with antenna placement Antennae need to see the broadcast device or have the ability to receive a reflected signal from a device installed high off the ground 19 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Q A The adjustable power level will not increase distance but rather increases signal intensity For a smaller deployment not covering as much physical area the power level may need to be decreased2. digital conversion The FCC is the governing body over white space use in the US Broadcasting on White Space Channels The HDS PB100 requires an internet signal in order for it to become enabled based upon its registration with the FCC when installed The FCC has delegated white space channels between channels 21 to 51 for personal broadcast and requires a fee to use them The annual fee is approximately 55 Note The first years fee is included within the original purchase price of the unit Notification is sent on an annual basis that further use will require payment of annual fee Items Needed for Installation Network connection that allows internet connectivity PC Laptop or Media Player that has the ability to output a Transport Stream via the Ethernet port e Digital Television s that has have ATSC tuner s Over the air antenna to connect to DTV tuner e Cat 5e 6 network cables for interconnections e Mounting hardware optional Package Contents Ensure that the following items are present in the package If any items are missing or damaged please call Peerless AV Customer Care at 1 800 865 2112 available 7 00am 7 00pm CST Monday Friday lt gt Pico Antenna Power Manual USB Flash Broadcaster Adapter with Drive Inserts oA ISSUED 11 07 13 SHEET 180 9044 1 Product Overview Front peerless 1 SD Card e SD card slot Factory use only 2 Error The Error indicator light will be
3. illuminated red if there is a problem with the Broadcaster 3 On Air e The On Air indicator light will be illuminated blue signaling that the Broadcaster is enabled 4 Power The Power indicator light will be illuminated blue signaling that power is applied to the Broadcaster 7 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Back 23 1 DC 12V DC power input port 2 Reset e Restores settings back to factory defaults Factory use only 3 Confi Allows for internal Broadcaster configuration Factory use only 4 USB e USB port Factory use only 5 RS232 RS232 port Factory use only 6 LAN Direct connection to LAN cable for product configuration and data streaming 7 RF Ant RF antenna terminal 8 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 1 Locate the Power Adapter and appropriate insert US shown Place insert into the Power Adapter as shown and push to lock into place Step 2 Connect the Antenna to the RF Ant terminal on the back of the Broadcaster 9 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 3 The broadcaster needs to be as centrally located as possible to allow its omni directional antenna uniform coverage over the entire area that the DTV s will be located within Install the Broadcaster as high in the air as possible to ensure that an unimpeded signal is transmitted down toward the DTV s Proper positioning will allow the full radial distance potent
4. operating and maintenance servicing instructions in the literature accompanying the appliance Le symbole de l clair avec une fl che a son extr mit dans un triangle quilat ral a pour but de vous avertir de la presence d une tension lectrique dangereuse et non isol e a l int rieur de l enceinte de l appareil qui peut tre suffisamment puissante pour constituer un risque d lctrocution pour les personnes Le point d excalamation dans un triangle quilat ral vous avertit de l existence d instructions importantes de fonctionnement et d entretien intervention dans la documnetation accompagnant l appareil 4 of 24 ISSUED 11 07 13 SHEET 180 9044 1 17 To avoid electric shock never stick anything in the slots on the case or remove the cover 18 This product is intended for indoor use only e Never use this product in an aircraft or a medical facility as it can cause interference or an undesirable effect e The use of this product in the following locations may result in abnormal audio output noise etc a When the product is placed near a refrigerator or metal structure 5 A cluttered room where the wireless signals may be blocked e This product has been tested and manufactured to comply with each country s safety rules However there is no guarantee that interference will not occur in some installations If interference happens decrease the distance between the product and receiving antenna e Opti
5. 92 168 1 194 and 192 168 1 193 respectively Base port is 5002 You need to match the IP of the HDS PB100 to the IP of the Local Area Network that it will be associated with After values have been adjusted click OK button Streaming IP Address 192 168 1 193 14 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 4 Click on the Preparation Tab The software can accept a number of different file types that can be readied for streaming see Help file for supported file types The user can use the drag and drop feature to pull content into the grey window or can populate the window by using the Import Files button Once the user has brought the files they want to stream into the software and they have been transcoded the user can now setup a playlist to automate content delivery Assemble your video files here drag and drop into the window or use Import Files then Transcode the files to prepare for playback File Name File Size Mb Duration Transcodings Mbps Status _ import Files Transcode J Delete Step 5 Click on the Playlist sub tab Playlist Content Bitrate a Total File Name Playlist Name Mbps Duration Edit Copy Delete Transcode Choose Content 15 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 6 Click on New Playlist to name the playlist Once the playlist is named click OK Choose a unique name for your new playlist P
6. Strear peerless AV Settings Preparation Playback Choose a File or Playlist to play live Live Play Video resource lt None chosen gt Loop the video 6 6 18 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Q A The HDS PB100 needs the format of the media to be MPEG 2 TS The Peerless AV Streaming Media software will determine if the given media file s need transcoding once the file is dropped into the window Q A The only input associated with the HDS PB100 is an RJ45 network port as the Broadcaster requires a UDP stream User Datagram Protocol Q A The DB9 port is for factory use only Q A The USB port is for factory use only Q A If information and setup need to return to factory settings press the reset toggle briefly while power is applied The RJ 45 lights will blink off and then on momentarily Unit has now been rest Wait 30 seconds to access webpage to continue setup Q A The confi toggle is used only for firmware updates The user will hold down the confi toggle as power is applied This will put the device into firmware update mode Q A The SD Card slot is for factory use only Q A White space channels are the frequencies available that allow for low power personal broadcast devices In any given geographical location there are from 1 10 or more available channels to broadcast onto These channels are within the frequencies 500 MHz 700
7. User Manual and Installation Guide peerless Pico Broadcaster US Patent No 8 063 996 Other patents pending Models HDS PB100 ISSUED 11 07 13 SHEET 180 9044 1 2 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Contents important Salety INStruUc ONS sssusa EAKA ARRE 4 important iniormation sessin eaaa Ea aar a aani 5 Unit Care Recommendations cco cha cece casts cic nese neem ceetetcee cbigee bat anenneiet ic nennen nnmnnn nma 5 BAUR CCN Was aaa he E ie cece E te ede eee ee ase et acme ef uci cere ccteniet 6 What are White Space Channels cccccccccccesecceceeseceeceeeeeeceeeeceeseeeeeeseeeeeeesseeeeeseaeeeeesseeeeeesaes 6 Broadcasting on White Space Channels wisetins coscnrcenvecuvnert tisdsconlateviacenedndindslestsieus ue etindihcdecede 6 Items Needed for Installation xciiscvocciisstenntweyanccnce sid dreatennameittnniatdanedunideiakicaiaih here d deux Domianeeinetieeandiiains 6 Package C OERI ei me eR ee ne ee aS ee ee ee ene eee eee 6 mMStahatio a Peeeereee neta ena nret rire ren R RUNS reer Onn terre rrr On mn mere on naS RiP on mn pene econo 7 Product SIS e S E A enemas ticneteundeapeegmsaneeasoeae T Opera Oe EA EE 14 Streaming Server Software s n nseerrsreessrrrrrosssrrrrrrrssrrrrerssrneerorssrnrrosserrnrrrrssnnrreeeeneerreresnnrnnne 14 FAOS eneee e cg era E 19 PSNI sporos eens E aa aa aaaea eaa aaia E s 21 Product Specifications og ects adennaneiebiinsddenateenaedeutsucehgns aud ontadincbdienGa
8. as to not produce too hot of a signal that is difficult to tune in Q A Due to the FCC requiring an annual fee to use licensed white space channels internet connectivity is required in order for the polling of the HDS PB100 to take place and verify the current license Q A If the HDS PB100 needs to be situated in a setting that does not allow for an elevated installation i e AV Rack IT Closet etc you may provide a run of coax between the device and the antenna in order install the antenna at an appropriate location allowing for proper placement Note that as you add coax between the antenna and the device you also add attenuation Q A Currently the Peerless AV streaming software allows preset AV files to be encoded properly and streamed to the HDS PB100 However there is open source software that has the ability to stream from a desktop so no matter what is displayed on the desktop of a PC the Broadcaster can transmit the signal Q A Yes On the first page of the software you will see a field that says Channel Name To the far right of that click Edit and enter in the name of the channel as well as the actual channel number Click OK 20 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Product Specifications HDS PB100 Input AudioWVideo via LAN port MPEG2 Transport ATSC modulated broadcast signal HD Broadcast format TV signal Stereo AC3 audio Output power variable up to 40mW White space database c
9. esSienubedeunaediiaebiaaudedncaiumindnettaeusedes 21 Federal Communication Commission Interference Statement ceeeeeeeeeeeeaeeeeeeeeeeeeeees 21 Limited Warr arity sosisini EE a Ee antennas 22 Contact Informatio sssini a aaa eaaa idaan 23 3 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Warnings Safety Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with manufacturer s instructions CO NO OB WN Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or so
10. hannels Displays channels available for use Preferred Channels Enter up to 3 comma separated channels between 21 and 51 Preferences Network Upgrade Radio Preferences RF Settings Power Level Avaliable Channels Preferred Channels O Specty up to 3 comma separated channels between 21 and 51 23 42 50 12 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 5e Click on the Network sub tab to open the Network Configuration page This page contains information about IP Settings and Streaming Settings Fill in all fields in the IP Settings section to match the existing network settings or create custom settings if needed Fill in the field in the Streaming Settings section with the IP address set up for data streaming If multiple HDS PB100 devices are connected on the network each device MUST have a unique streaming IP address Once all data fields are complete click on Save amp Apply at the bottom right of the screen Note If IP addresses are modified open a new web browser and enter the new IP address to confirm changes took place Network Configuration TP Settings Configuraian Type Static IP IP Address Subnet Mask z ZEF Gateway Address A fisz ThE 11 Primary ONS Server z Secondary DHS Server SSS Streaming Settings Streaming IP Address Step 5f Click on the Tools sub tab to open the Software Tools page This page contains information about Software Upgrade and Factory Reset If a s
11. he applicable express warranty set forth above Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This warranty does not cover damage caused by a service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless AV b the failure to utilize proper packing when returning the product c incorrect installation or the failure to follow Peerless AV s instructions or warnings when installing using or storing the product or d misuse or accident in transit or otherwise including in cases of third party actions and force majeure This warranty also does not cover corrosion or rust resulting from damaged scratched or chipped paint or other surfaces In no event shall Peerless AV be liable for incidental or consequential damages or damages arising from the theft of any product whether or not secured by a security device which may be included with the Peerless AV product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty is in lieu of all other warranties express or implied and is the sole remedy with respect to product defects No dealer distributor installer or other person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless AV in connection with the sale of any Pee
12. ial of 350 106m The Broadcaster can be mounted to a vertical surface if required The rubber pads on the bottom of the Broadcaster may be removed prior to installation Ideally the Broadcaster should be installed in one of the orientations pictured below mounting hardware not included Note To ensure uniform signal coverage the antenna must point straight up Step 4 The Broadcaster will need to access the internet and receive its media content via a network connection Connect the broadcaster to the network before applying power to the device Plug in the power adapter into an available power outlet Note If the broadcaster becomes unplugged from its power adapter wait 30 seconds before applying power to allow it to reset The diagram below shows two typical Broadcaster installations Standard Coaxial RX RX PC Media Player HDS PB100 Antenna HDS PB100 Antenna 2 way Splitter 4 way Splitter 4 way Splitter 10 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 5 Allow the broadcaster to be connected to network for approx 30 seconds before accessing its IP address From a computer connected to the network enter 192 168 1 194 in the address bar of the web browser This will bring you to the White Space Registration page Step 5a Fill in all fields in the Who You Are section to register your unit with the White Space Database Contact Name Owner Name Phone Number Email Address Street Address City State Zi
13. laylist Name Test Le ox __ Sa Step 7 The user can now drag and drop any of the transcoded files into the Playlist Content window to create a custom playlist of their content Once files have been transcoded and playlists have been created content is now ready to be streamed to the modulator for the OTA broadcast Click on the Playback tab To playback content click on the Browse button 16 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 8 The window below will appear which will show all the transcoded content as well as the playlists that have been created Choose the file or playlist to stream and click OK Choose the resource you would like to play Pte TO Show Files T Show Playlists Step 9 The end user will then choose to play the content by pressing Play If looping of content is needed the user should click the Loop the Video button before pressing play Once the content is playing the Play button will convert to a Pause button If the content needs to be paused and not started over press Pause If the stop button is pressed when Play is depressed the content will start from the beginning of the loop 17 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 10 If additional support is needed the Help tab on the far right of the software window will launch a help file that will address concerns when using the software TJ Peeriess AV
14. ld with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 The product was submitted and evaluated for use at the maximum ambient Tma a 40 C 16 WARNING To reduce the risk of fire or electrical shock do not place this apparatus in a position where it is exposed to dripping or splashing liquid rain moisture or exceedingly high humidity Objects containing liquid shall not be placed in proximity to the unit such that they present a risk of spillage onto the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE PAS OUVRIR The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be a sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
15. mal use of this product is for in room multi room applications with a range of up to 350 ft 106m away line of sight up to 30ft 9m through one structure e Any changes or modifications not expressly approved by the manufacturer of this device could void the product warranty e This equipment must be installed and operated in accordance with the provided instructions The Transmitter must be installed to provide a separation distance of at least 8 20cm from all persons and must not be operating near or in conjunction with any other Transmitter End users and installers must be provided with installation instructions and Transmitter operating conditions for satisfying RF exposure compliance e This device should be used only as specified within this manual to meet RF exposure requirements Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions To clean use a soft dry cloth only Do not use water or other cleaning products as they may cause electrical failure or damage the surface of the product 5 of 24 ISSUED 11 07 13 SHEET 180 9044 1 The HDS PB100 is a personal broadcasting device that is capable of broadcasting HD quality content from a computer or select media player s with IP transport output capabilities to any open white space channels local to the area What are White Space Channels White space channels refer to the channels that were left over from the analog to
16. oftware upgrade is needed click on the browse button in the Software Upgrade section and choose the upgrade file to install Once the file is installed click on Save amp Apply at the bottom right of the section If a factory reset is needed click on Reset at the bottom right of the Factory Reset section Once all settings have been saved and applied content is now ready to stream to the Broadcaster D Save amp Apply Reset to Factory Detauits 2012 Spectrum Bridge inc All Rights Reserved 13 of 24 ISSUED 11 07 13 SHEET 180 9044 1 EELO Streaming Server Software Included with the Pico Broadcaster is a program that will allow the end user to create custom playlists of video content to be streamed by the Broadcaster Step 1 Navigate to the folder where your streaming server installation software resides Click on setup exe and follow the on screen prompts to complete the installation Step 2 Launch the Peerless AV Streaming Media Software Click the Settings button to open the Settings dialog box Click on New Device button peerless AV Choose the folder where the system should store its files specify the device s it will play to and set the playback channel Data Folder C Users Public Documents Peerless Channel Name PICO Channel Number 71 Devices Step 3 You will need to enter the IP address of the Pico Broadcaster Default IP adress of the device and digital modulator is 1
17. ompliant channel selection Broadcast Range 350 maximum radius Broadcast Frequency 500 700 MHz Channel Range 21 24 51 Power Supply Input 100 240V 50 60Hz 1A m e Operating Temperature 32 to M131 0 to 55 C Compliance Safety UL60065 FCC Class B Product Dimensions Wx Dx H 14 19 x 7 50 x 1 74 360 x 190 x 44mm Product Weight 3 36lb 1 52kg Federal Communication Commission Interference Statement Pico Broadcaster This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference received including interference that may cause undesired operation FCC_Model MT300v1 FCC ID OKVMT300 21 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Peerless Industries Inc Peerless AV warrants to original end users of Peerless AV products that Peerless AV products will be free from defects in material and workmanship under normal use for the periods listed below from the date of purchase by the original end user At its option Peerless AV will repair or replace with new or refurbished products or parts or refund the purchase price of any Peerless AV product which fails to conform with this warranty In no event shall the duration of any implied warranty of merchantability or fitness for a particular purpose be longer than the period of t
18. p Code Country This contact information is what the FCC uses to send notification regarding update fees and information White ace Registration Flaaee fl out the form below to submit device regitratian to the White Space Database Whe you ane Contact Mame R Oriner Name D Company keme or Representative Phone Number Email Address Strect Address Lite State Zip Code Country Step 5b Fill in all fields in the Where You Are section Latitude and Longitude This information should reflect the physical location of the Broadcaster You can find this information by visiting websites such as http www getlatilon com and http www findlatitudeandlongitude com or use the app Show My White Space from Spectrum Bridge Inc available for Android and iOS Data in the Device Information section contains information specific to your Broadcaster Once all data fields are complete click Save amp Apply at the bottom right of the screen Where you are Latitude E Coordinates in decimal format Longida C Ceardinates in decimal farmnar Device Information FOC ID Sena Number Dewe Tros 11 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Step 5c Click on Status tab to open the Device Status page This page contains information about Radio Status and White Space Status Radio Status Operating Channel The channel that the broadcaster has been set to Transmitter status Displays the
19. rless AV product This warranty gives specific legal rights and you may also have other rights which vary from state to state Product Warranty Period Mounts 5 years Furniture 1 year Cables 25 years Cleaning Products 1 year Electronic Products and components 1 year 22 of 24 ISSUED 11 07 13 SHEET 180 9044 1 Customer Care Need help with set up Call Peerless AV Customer Care 1 800 865 2112 available 7 00am 7 00pm CST Monday Friday or email us at info peerless av com Peerless AV 2300 White Oak Circle Aurora IL 60502 USA peerair peerless av com 23 of 24 ISSUED 11 07 13 SHEET 180 9044 1 peerless AV Peerless AV 2300 White Oak Circle Aurora IL 60502 USA peerair peerless av com 2013 Peerless AV All rights reserved Peerless AV is a trademark of Peerless Industries Inc Other parties marks are the property of their respective owners
20. status of the broadcaster White Space Status e Registration Status Displays the status of the Broadcasters registration The status must be displayed as Success in order for the broadcaster to become enabled e Last Registration Request Displays the time and date that the broadcaster was registered Channel Request Status Displays whether the information regarding the location of the user has been successfully applied to an open white space channel e Available Channels Displays a list of channels that the database recommends based upon the users latitude and longitude s Last Channel Request Displays the time and date in which the broadcaster accessed the database to search for available channels Device Status Radio Status a Opersting Channe a Transmitter ctatus Disabled White Space Status Regeetrotian Status Success Last Registration Request Mon 15 Oct 2012 19 11 03 GMT Channel Request Statues Last Channel Request a 6 Available Chon Step 5d Click on the Advanced tab to display the Preferences Networks and Upgrade sub tabs The Preferences sub tab contains information about RF Settings Power Level Click on the pull down menu to set the required power level 1 11 Note Keep power level at 11 unless a shorter broadcast range is desired For in room and smaller spaces it may be necessary to change power level to 5 otherwise the broadcast power is too hot for DTV tuner Available C
Download Pdf Manuals
Related Search