Proximity reader iPR-A5RSx, iPR-A5W2x, i PR-A5W3x, iPR
Contents
1. Proximity reader iPR A5RSx iPR A5W2x i PR A5W3x iPR A5W4x PR A5WSx iPR A5TMx user manual Introduction The proximity reader with build in keypad is intended for being applied in different access control systems using RS232 Wiegand 26 Wiegand 37 Wiegand 42 Wiegand with automatic choice or TouchMemory interface The interface type may be changed by special PC programm If you need to change the interface type please call your distributor The reader is putted in elegant plastic case with membrane keypad and two color LED indicators on front pannel Types of tags The reader operates with amplitude modulation ASK proximity cards Type of tag is selected by programmator Benefits Case Material ABS plastic Dimensions 115x72x19mm Weight 120g Ambient Conditions Oper temp 20 C 55 C Stor temp 30 C 80 C Humidity 95 rel at 25 C Power supply Voltage 8 18VDC Current up to 50 mA Max current up to 80 mA Voltage ripple up to 500 mV Distance of reading Typical reading distance is 120 mm This parameter is valid for power supply voltage range 8 to 18 VDC and ripple up to 150 mV http Avww itvsystems com ua Integrated Techical Vision Ltd 1 Wiring The reader is equipped with 8 wire interface wa wa 7wa ws 8232 Touehtemory V Brown Redted Red led Orange GreenLed Greenled Ble Beep Beep Table The wires assignment AWG22 mu2. eae ee Read ofcard 23h data checksum obn Read of PN code 21h data checksum oDn http www itvsystems com ua Integrated Techical Vision Ltd 3 bit 7 61514 3f2 1 0 sata vawe To oT 1 x x x x Checksum exclusive or low nibbles of bytes from 1 to 10 High nibble of 1 to 10 bytes always must be 3h If codelength is shorter than maximal one depends on interface type liding hex F will be added Example Card code 7E000460AA will be send as 23h 37h 3Eh 30h 30h 30h 34h 36h 30h 3Ah 3Ah 3Bh ODh Example Pin code 1234 will be send as 21h 3Fh 3Fh 3Fh 3Fh 3Fh 3Fh 31h 32h 33h 34h 34h ODh Limited Warranty Integrated Technical Vision Ltd warrants that for a period of eighteen months from the date of purchase the product shall be free of defect in materials and workmanship under normal use and that in fulfilment of any breach of such warranty Integrated Technical Vision Itd shall at its option repair or replace the defective equipment upon return of the equipment to its repair depot This warranty applies only to defects in parts and workmanship and not damaged incurred in shipping or handing or damaged due to causes beyond the control of Integrated Technical Vision Ltd such as lightning excessive voltage mechanical shock water damage or damage arising out of abuse alteration or improper application of the equipment The foregoing warranty shall apply only t
3. ltiwire signal cable is recommended In this case maximum cable length up to 100 meters can be obtained Type of interfaces The proximity reader with build in keypad is intended for application in different access control systems using RS232 Wiegand 26 Wiegand 37 Wiegand 42 Wiegand with automatic choice or TouchMemory interface Mounting Mount the reader on the wall close to the lock Do not place the reader on metal surfaces since it causes to reading distance decreasing Q f more than one reader is used in the system place them at 50 cm minimal distance from one another otherwise a reading distance will be decreased Fix back plate on the wall on the place where the reader will be mounted Prepare all wires for connection and connect the wires with the reader according to Table 1 and User Manual of the controller to be utilized The Reader Operation RFID Card Code Reading The card code reading is annunciated by built in buzzer and LED lamp according to interface type and annunciation mode see Section Data transfer and Annunciation Next card reading is available after 0 75 sec if the previous card was removed from reader sensing area Code Entering Push the button to finish the code entering Push the button to cancel wrong code Pushing of every button is indicated by buzer sound Hold Mode Not for RS232 interface For FSK cards only 2 Integrated Technical Vision Ltd http Awww itvsyste
4. ms com ua Reader turns into hold mode If yellow wire is closed to ground In this mode reader does not read cards thus current consumption decreases Do not apply voltage to yellow wire Data transfer and Indication The reader is provided with two colour LED indicator and buzzer LED and buzzer function according to interface type programmed and annunciation mode Wiegand or TouchMemory Interface LED and buzzer switching on is possible automaticly or by grounding of the corresponding wire according to the table 2 Table 2 Annunciation mode Data transmission from reader complies with standard Wiegand26 Wiegand37 Wiegand42 or TouchMemory protocols Protocol for TouchMemory interface from family 01 to satisfy the requirements DS1990 Interface RS232 CO p pam o o OE 00 Beep on card read LED normaly on switch off at reading Blinking at reading 06__ Beep on card read Control from host Control from host_ To control annunciation send control packet to the reader Packets should be transmit ted with 2 400 baud rate 8 bit data no parity 1 stop bit Packet format Eea blinking LED lit prea oe Ping puemi unirterapteay blinking pulsatory uninterruptedly 1 corresponds LED or buzzer switched on LED blinking and buzzer pulsatory control bits have highest priority Annunciation does not change until next control packet received Reader transmits data as follows of byte
5. o the original buyer and is and shall be lieu of any and all other warranties whether expressed or implied and of all other obligations or liabilities on the part of Integrated Technical Vision Ltd This warranty contains the entire warranty Integrated Technical Vision Ltd neither assumes nor authorizes any other person purporting to act on its behalf to modify or to change this warranty nor to assume for it any warranty or liability concerning this product In no event shall Integrated Technical Vision Ltd be liable for any direct indirect or consequential damages Loss of anticipated profits loss of time or any other losses incurred by the buyer in connection with the purchase installation or operation or failure of this product 4 Integrated Technical Vision Ltd http Awww itvsystems com ua
Download Pdf Manuals
Related Search