Thermostatic Rack-Mount Fan Tray User Manual
Contents
1. Applicable Products Product Code Image LXMATFTTURM2UK LXMATFTTURM2EU LXMATFTTURM2US LXMATFTIURMZ2IEC 2 Fan LXMATFTTURM4UK LXMATFTTURM4EU LXMATFTTURM4US LXMATFTTURMAIEC 4 Fan Specifications EAV 40 C to 99 C KMENG EAEn 0A OES 220VAC Sansome x NTC Sensor eaves 1 C Celso lt 3W Ninlelcaestsellccaesiem Temperature 10 C to 60 C Humidity 20 85 No Condensate WORK Digital Indicator Display SET Button UP Button POWER Button DOWN Button SET Indicator Linxcom UK Ltd Unit 3 Stephenson Close Daventry Northamptonshire NN11 8RF United Kingdom Reg No 07157746 Registered in England VAT No GB 990 2417 16 Tel 44 1327 705 425 Email sales linx com com Web www linx com com Indicators ON Set temperature has been met and fans working OFF Set temperature not met and fans off FLASHING Delay between modes ON In setting mode OFF In working mode Switching On Off 1 When off press the POWER button to switch the device on 2 When on press and hold the POWER button for 5 second to switch device off Setting the Temperature Press SET button 2 Use the UP and DOWN buttons to desired temperature 3 Press SET button to save displayed temperature Setting Functions 1 Press and hold the SET button for 3 seconds 2 Use UP and DOWN buttons to change the function s setting See table below 3 Press the SET button to go to the next function 4 Once complete press and hold the SET button2. for 3 seconds to save settings Display Settings Range Default HC C Mode C Cooling H Heating D Temperature Differential 1to15 3 T LS Lower Temperature Limit 40 to Set Temperature 40 C HS Higher Temperature Limit Set Temperature to 99 99 C CA Temperature Calibration 5 to 5 0 T PT Compressor Delay 0 to 15 3 Minute Cooling Heating In COOLING mode if the displayed temperature is more than the set temperature the fans will operate In HEATING mode if the displayed temperature Is less than the set temperature the fans will operate Lower Higher Temperature Limit This function allows you to change the lower higher temperature limits Compressor Delay This function sets the delay of the fan operation since their last operation or after powering on the unit Temperature Calibration This function allows the user to adjust the temperature displayed to the correct temperature Errors Sensor Error Alarm Unit will operate fans for 15 minutes then off for 15 minutes LL Lower Temperature Limit Reached Alarm Unit will turn fan operation off HH Higher Temperature Limit Reached Alarm Unit will turn fan operation off Linxcom UK Ltd Unit 3 Stephenson Close Daventry Northamptonshire NN11 8RF United Kingdom Reg No 07157746 Registered in England VAT No GB 990 2417 16 Tel 44 1327 705 425 Email sales linx com com Web www linx com com
Download Pdf Manuals
Related Search