IP Camera
Contents
1. Record cover m Video settings screen with the detailed description Figure 10 3 3 Device web setting 3 3 1 Basic network settings The user can also enter the Basic Network Settings to set the IP address except using the search software LSearch_en exe See below Figure 11 IP Camera Options KaiCong Basic Network Settings Obtain IP from DHCP Server IP Address 10 10 8 178 E Subnet Mask Gateway 255 255 255 0 10 10 8 254 DNS Serverl DNS Server2 8 8 8 8 210 22 70 3 Http Port 81 Network Settings screen with the detailed description Figure 11 Remark The router connected to camera need to enable DHCP when the user uses obtain IP from DHCP server the routers enable DHCP by default 3 3 2 Wireless wifi settings Please refer to chapter 2 2 Anything else please contact me KaiCong Nothing important than safety 3 4Alarm Settings 3 4 1 Alarm service setting If user need to monitor a fixed area when there is any motion it will detect the motion and trigger the alarm In the motion detect sensibility the smaller the value the more sensitivity After triggering the alarm you can adopt several alarm mode in armed time example of figure 15 gt Link to the Preset when alarming need to set preset point of the camera gt Send alarm info by email a email include a picture every2. Options Figure 7 Anything else please contact me KaiCong Nothing important than safety 1 Audio Talk Record Snapshot 2 E i ato You can click these buttons to perform audio talk record and snapshot functions Note about recording path click peo button to enter setting interface you can set it in Local Recording Path as figure 8 IP Camera Options 2 Local record path ca a Least 5 Minutes MAX 120 Minutes Reserved disk space MB Least 200MB Record cover Video settings screen with the detailed description Figure 8 2 Multipicture change button If you add multi devices in chapter 3 5 1 multi device setting it will connect other device to display pictures automatically when changing to 4 9 split screen In playing video area you can select a picture to control audio talk record snapshot and PTZ control etc 3 Viewing control area 1 Rotate Buttons Up Down Left Right 2 IP Camera 2 Cruise Button for Left and Right 3 Cruise Button for Up and Down 4 Show the alias and time of camera 5 Up down and Turn Around of the Picture 6 Switch of External Relay 4 Setting device parameters Click peo button to enter setting interface you can set all parameters of the camera described in chapter 3 2 to 3 5 Only administrator can login to set these parameters 3 2 Device information 3 2 1 Device status The use
3. Built in web server all data is transferred through one port it is easy for user to do the network setting Manufacture attached a label at the bottom of each IP Camera it include DDNS When IP Camera is connected to the internet this URL can be used to visit the device Manufacturer provides free software support Multi view long time recording video playback etc Please check carefully if all listed items are included in the package if anything missing please contact vendor in time 2 Installation guide 2 1 Wired connection to LAN Power on the IP camera connect IP camera to router by network cable meanwhile connect computer to the same router example of figure 1 Anything else please contact me KaiCong Nothing important than safety ee ee Figure 1 Search IP Camera Download search software click on Search http www kaicong net fusheng 160xSearchen rar Anything else please contact me KaiCong Nothing important than safety PA Bl USeries Intranet search and settings V1 0 12 26 eases __X 3 Local PC information Device information W Network adapter Realtek RTL8188CE 802 1 v Device name Sys Firmyvare ver i IF address 410 10 8 145 Subnet mask 255 255 255 0 ARANA nn IP config _ Set IP automatically Gateway 10 10 8 254 IP address 1 DNS1 210 22 70 3 DNS 210 22 84 3 Subnet mask U Gateway G Device list DNS1 D
4. DeviceName DeviP Http port P KaiCongiPC 10 10 8 179 KaiConglPcam 10 10 8 98 Authentication Viewing Account Viewing Password Update FS Y mo 1 gt This tool is only used within LAN pc and device is within the same subnet 2 gt Only the legit user can update device informations als Browse F4 run the software click Search select the device searched click Browse to open browser it will pop up user login dialog enter default user name admin and password 123456 to login the camera as figure 2 Anything else please contact me KaiCong Nothing important than safety KaiCong Official Website KaiCong IP Camera KaiCong Technology Forum ActiveX Mode For IE Browser Sign in Server Push Mode For FireFox Google Browser Sign in Mobile Phone For Browser that supports Javascript Sign in Language English v e lit Figure 2 We suggest using IE kernel browser to view the video it can provide more functions but user needs to install video player before viewing the video Click OCX Download to download OCX and install it Notice Ifyou installed the firewall software in your PC when you run the LSearch_en exe it may pop up a window to say whether you want to block this program or not then you should choose not to block You can hold on reset button on the camera for 10 seconds to restore factory default if you forget user n
5. No Function Port Forwarding Port Iriggerin internet Service Provider WAN Setup 2 LAN Setup ry Ports Custom Services Ports Custom Services m Input IP camera IP address DAGNE aa P Input IP camera port conico Name iP np Service Type CPU v Service Type TCP UDP v Starting Port 1025 65534 3 Starting Port 1025 _ 1 65534 Ending Port 1025 1 65534 enging Mon ane 1 65534 ry Cancel estas Conce Figure 6 Operation Steps 1 After login the interface of the router choose Port Forwarding 2 Choose Add custom Service 3 Input IP camera http port 4 Input IP address of IP camera click Apply After finishing the port forwarding you can use WAN IP address of router and http port of Anything else please contact me KaiCong Nothing important than safety camera to visit the camera by remote computer as figure 5 Notice because the routers are different so the interface and setting method of router are also different how to do the port forwarding for various routers please refer to the user manual of your router or consult with router manufacturer 3 Operation of IE browser 3 1 View video After installing the plug ins click Mode 1 to view as Figure 2 to view the video video as Figure 7 E IP Camera oY t s0 BESES Resolution 640 480 Mode 60HZ Brightness 1 v Contrast 14 v Max FPS 30 y Preset Call Set E i atoe
6. 14 07 25 motion alarm 2014 03 14 13 54 11 motion alarm 2014 03 14 13 42 06 motion alarm 2014 03 14 13 40 47 motion alarm 2014 03 14 13 22 13 motion alarm 2014 03 14 13 21 32 motion alarm 2014 03 14 13 20 54 motion alarm 2014 03 14 13 16 22 motion alarm 2014 03 14 13 14 36 motion alarm 2014 03 14 13 14 02 motion alarm 2014 03 14 13 10 38 motion alarm 2014 03 14 13 00 14 motion alarm 2014 03 14 12 59 26 motion alarm 2014 03 14 12 12 42 motion alarm 2014 03 14 12 37 24 motion alarm 2014 03 14 12 36 09 motion alarm 2014 03 14 12 34 28 motion alarm 2014 03 14 12 33 45 motion alarm 2014 03 14 12 32 20 motion alarm 2014 03 14 12 28 04 motion alarm 2014 03 14 12 26 13 Remove Refresh Figure 15 3 5 User and device setting 3 5 1 Multi device Setting As Figure 16 User can add maximum 9 devices to view video simultaneously Click refresh button to check the device in the LAN When click a device will popup setting dialogue and enter the device info and click Add to add device After that must click Setup button to save device Anything else please contact me KaiCong Nothing important than safety IP Camera Options lt a JAR Multi Device Settings Device List in Lan The 1st Device This Device The 2nd Device None The 3rd Device None The 4th Device None The 5th Device None The 6th Device None The 7th Device None The 8th Device None T
7. SV Ce CUNA AC ria 11 SA L Ma SCI VI COS CU 12 SAS F PSIE SCLC an a a a casa on oc 12 SA AA A E A A T Cd EN ne Se 13 SO USERAND DEVICE SETTING coen en E r R EN 13 DD Mul CES A O EE ad 13 SOL UTOT S Er AA A RE URC OE 14 OBOE iaa 14 SOAM oi n REC dia 14 4 VISITING DEVICE BY OTHER SOFTWARE esseecessooeessoccessoccessoccessoceessoccessoccessoceessoccessoceess 15 ANOTHER WEB BROWSER micia tereira nienn enr T r E E N 15 A Z MOBILE PHONE SOFTWARE ios 15 49 CENTRALIZATION CONTROLS aia 15 Anything else please contact me KaiCong Nothing important than safety 1 Product introduction 1 1 Product summary Thank you for choosing our company s L series IP camera the IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet It is very suitable for family shops office building and so on Main features for L series 4 gt o DO gt Notice 4 The video is compressed by MJPEG There are VGA QVGA QQVGA three video resolutions optional User can changes some parameters according to their demands to satisfy his own visual prefer Infrared LED for night vision covers 5m area to realize 24 hours monitoring Support 802 11b g n protocol can build up wireless monitoring Support motion detection send alarm information by email and FTP Support mobile phone to view
8. browser Except IE browser you can visit the camera by Firefox Safari Chrome Opera browser etc please select Mode 2 to view 4 2 Mobile phone software For more information please see the user manual for mobile phone in attached CD or download the latest software and user manual in our website 4 3 Centralization Control IPCMonitor is a free software offered by factory several devices on LAN and WAN can be browsed at the same time The software also supports snapshot video record scheduled record alarming and so on The interface is as figure 23 Centralization Control download http www KaiCong net fusheng 160xMonitoren rar IP Camera q F will be m Figure 20 For more information please refer to the lt lt IPCMonitor User Manual gt gt in CD Android monitoring To download and install the software to your phone watch approach and iPhone http www kaicong net download ZhiYunForAndroid apk Anything else please contact me KaiCong Nothing important than safety iPhone monitoring Search in the Apple App Stores Seeu and download Anything else please contact me KaiCong Nothing important than safety After the download is complete enable the software kaicong Anything else please contact me KaiCong Nothing important than safety eccocoe HEME E Anything else please contact me KaiCong Nothing important than safety Into the camera list click
9. KaiCong Nothing important than safety IP Camera Kai Cong IP camera SIP 1602 KaiCong KaiCong SIP 1602 User manual 2014 03 14 V1 0 Anything else please contact me KaiCong Nothing important than safety Statement If the user manual can not help you to solve the problem please call our technology center for solutions We will update the content for the new functions without notice SA Notice Installation Environment Keep away from the places for high temperature heat source and direct sunlight Keep away from water and when get wet cut off the power immediately Avoid using at damp environment the reference range for operation humidity is below 85 RH Avoid using in overheating and too cold environment the reference range for operation temperature is 10 C 50 Please install it horizontally or wall mounting avoid strenuous vibration place and not put other equipments onto the item Transport and Handling The package is well designed to ensure the security during the delivery so please do not change the package at random Do not move the ip cameras from overheated to supercooled condition frequently otherwise it will frost and shorten the service life Do not move the item when is power on otherwise the main board might be damaged A Notice Please check the power supply before it is working Be careful not to bang the camera or subject it to strong impacts or shocks Do n
10. alarm trigger a email gt Send the snap to the FTP server user can also set the interval time between two pictures Device only triggers alarm when it detects any motion in armed time User can set schedule time to be all the time also assign the armed time Before you set Time Schedule please go to Date and Time settings to set the correct time for the item IP Camera Options KaiCong Alarm Service Settings Motion Detect Armed 7 Motion Detect Sensibility Motion Detect Sensibility 5 v the bigger number the E higher sensitivity Call preset on Alarm None y Alarm Input Armed El IO Linkage on Alarm EJ Send Mail on Alarm Y Upload FTP Image on Alarm Upload Interval Seconds Scheduler Eal select all Day 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2 Please make sure the Clock Setting in accordance with the local time Set Refresh Alarm Service Settings screen with the detailed description Figure 12 3 4 2 Mail Service Setting When it detects alarming it can send email to your appointed email box but you need to set email service parameters correctly Example of figure 16 click Submit to save these parameters and then you can click Test to check if the setting is successful IP Camera Options KaiCong Mail Service Settings SMTP Server Sender Please s
11. ame and password during the process don t disconnect the power otherwise the camera maybe damaged 2 2 WIFI connecting to LAN You can connect the camera with router by wireless connection as figure 3 Figure 3 Before connecting router by wifi please connect them as chapter 2 1 to Login camera and enter wifi setting and then operate as the following step example of figure 4 Anything else please contact me KaiCong Nothing important than safety IP Camera Options Wireless Lan Settings Wireless Network List Scan Iv KaiCong_201AP Using Wireless Lan SSID Network Type Infra y Authetication WPA2 PSK Personal AES v Share Key qsd060917 Set Refresh Wireless Settings screen with the detailed description Wireless Lan Settings SSID gizhibaobei 78 A1 06 2C BA C2 SHSXHG 29 2C B2 0D 19 B2 FAST FDFB16 14 E6 E4 MERCURY_bes ChinaUnicom Wireless Network List heiren TP LINK_5BA14E C 21 0A 5B A1 4E TP LINK 233270 wuhuan 20 DC E6 FC EF DF Tenda 0BF050 ChinaNet yqqd C 3A 35 0B F0 50 0E 4C 39 76 84 40 TP LINK_131D6C A 15 4D 13 1D 6C KaiCong 216airport 28 CF E9 84 F6 36 Scan SSID KaiCong_206airport Network Type Infra Authetication WPA2 PSK Personal AES Share Key qsd060917 Set Refresh Wireless Settings screen with the
12. detailed description Figure 4 Enter the Wireless LAN Setting click the Scan button it will show you all the wireless networks detected in the Wireless Network List column Select one of them and tick Using Wireless Lan then the relevant data of the selected wireless network will be shown in the following blanks Input the password and click Submit then the WIFI setting is finished Unplug the cable then you can connect to router by wifi Notice When the device is connected both WIFI and wired it will firstly connect to the wired network If the camera enables DHCP to obtain IP address automatically so the IP address is not same in wired connection and wifi connection recommend to set fixed IP address for the camera 2 3 Connecting to WAN You should connect the LAN network to WAN first and do the port forwarding connect as figure 5 Anything else please contact me KaiCong Nothing important than safety cable IP Camera 1 Router Router IP Camera 2 Figure 5 If visit IP Camera from WAN you must do port forwarding on the router Example of figure 6 N E T G E A R Please select the service type SMARITIWIZARD rout OPonForwarding wire OPon Triggering se a o j Basic Settings z STR ie Service Name Server IP Address t a j A Age of Empwe Y 192 168 1 Ade Does Your iternet Connect rn Wireless Settings O Yes Wireless Service Name Start Port End Port Server IP Addres Repeating
13. elect lt gmail com yahoo com yahoo com cn sina com and STARTTLS at 25 587 qq com sohu com Oyeah net 126 com 163 com tom com 263 net 21cn com eyou com SMTP Port Transport Layer Security Protocol Need Authentication Receiver 1 Receiver 2 Receiver 3 Receiver 4 Test Please set at first and then test Refresh Mail Service Settings screen with the detailed description Figure 13 Anything else please contact me KaiCong Nothing important than safety 3 4 3 FTP Service Setting When alarming the device will snap local picture and send them to FTP server but need to set the FTP setting correctly As figure 14 after the setting is finished click Test to check your settings are correct or not IP Camera Options KaiCong Ftp Service Settings FTP Server FTP Port FTP User FTP Password Jpload Interval Seconds Empty or 0 means do not upload ni Test Please set at first and then test FTP Service Settings screen with the detailed description Figure 14 Notice For using the FTP function you need to apply a user with authority that you can write and create submenu and some memory space 3 4 4 Alarm log You can inquire when the device performs alarm in alarm log IP Camera Options Alarm Log motion alarm 2014 03 14 13 40 33 motion alarm 2014 03 14
14. he 9th Device None attention If you want to access the device from internet be sure the host and port that you set can be ccessed from internet Refresh Multi screen setup screen with the detailed description Figure 16 3 5 2 User Settings IP Camera Options 2 aiCong Users Settings Group Password Visitor Operator Adminiator admin OW Set Figure 17 3 5 3 PTZ settings IP Camera Options 2 aiCong PTZ Settings Indicator Display Mode close v E Disable preset Started running to the specified preset PTZ speed Cruise Views slow v Always Figure 18 Note When you set cruise turns all the time the camera will automatically stop after cruising one hour 3 5 4 Maintain IP Camera Options KaiCong Firmware Upgrade Restore Factory Settings Restore Factory Settings Upgrade Device Firmware p Upgrade Upgrade Device Embeded Web UI Wa Upgrade Figure 19 Click Restore factory settings it will pop up a dialog to ask you if restore factory settings the camera will restore factory settings and reboot after you confirmed There are two types software in the camera one is device firmware another is Web Ul and you can upgrade them respectively Anything else please contact me KaiCong Nothing important than safety 4 Visiting device by other software 4 1 Other web
15. on the Add Camera A Camera Anything else please contact me KaiCong Nothing important than safety Add QRCode fey gt Add Camera Anything else please contact me KaiCong Nothing important than safety Scanning machines at the two dimensional code add the device Place a barcode inside the viewfinder rectangle to scan it Anything else please contact me KaiCong Nothing important than safety Select the added cameras monitoring Camera Online A Camera Anything else please contact me KaiCong Nothing important than safety Live View 2013 10 22 14 12 Anything else please contact me
16. ot directly touch the optical components for the image sensor if necessary please place a clean and moistened cloth with alcohol and wipe the dirt gently When not in use please place the dust cover on to the item to protect the image sensor Do not aim the camera directly into the sun or at other intense light sources that could affect the image quality it is not the problem for the ip camera also shorten the service life for the image sensor Keep away from laser when it is working otherwise the image sensor can be damaged If the equipment is not working properly please contact the store or the service center do not disassemble or modify the equipment in any way Problems caused by unauthorized modification or repair should be at your own risk Anything else please contact me KaiCong Nothing important than safety Index PPRODUC T INTRODUCTION ua caus E a 2 Te PRODUCT SUMMAR Vorai ooer tao 2 ZINSTALEATION GUIDE Sua da da 4 Zo WIRED CONNECTION TO LAW aan coo 4 222 WIE I CONNEC TING TO LAN nerean a a e e a siacdeasaauatt 5 20 CONNECTING TO MN e eta 6 3 OPERATION OF IE BROWSER 65 03 a 7 Ol VEW VIDEO ee ALO 7 32 DEVICE INRORMA TION atana n e a ia a Eea E E isa 9 BZ EV ACV CES tt AA AS td 9 SAL TI CVI CCL OSS CMA a 9 32 93 Dec GIO ANG mes cin a a Aes 9 22 ECO FCC OMA DIMAS AO OU es Sah Ba AA AO Reet as RAB 9 350 DEVICE WEB SETTING its 10 IM DGSIC NEIWOTIC CUE 10 SSL VEES USE ass 10 SA ALARM SE TUNO Srta ala 11 SATAA
17. r can obtain Device firmware version Web UI version Alias AP MAC etc 3 2 2 Device alias setting The user can name the camera example for home office etc Anything else please contact me KaiCong Nothing important than safety 3 2 3 Device date and time setting You can enable Sync with NTP Server when the device was connected to WAN but need to select correct time zone where the camera is located otherwise need to select Sync with PC time IP Camera Options KaiCong Date amp Time Settings Device Clock Time Device Clock Timezone Fri 14 Mar 2014 12 12 16 UTC GMT 08 00 Beijing Singapore Taipei v Sync with NTP Server Y Ntp Server time nist gov Y Sync with PC Time Clock setting detailed interface description Set Refresh Figure 9 Remark Please carefully check the camera time so it can be sure the alarm accuracy 3 2 4 Local recording path The camera will be automatically create a file folder named Record files when the user don t set local recording path and launch recording directly and then save recording file to the folder as figure 10 S KaiCong allik IP Camera Options Local record path Local record path CA l Record file length MB 100 Least 100MB MAX 1000MB Record time length Minute 5 Least 5 Minutes MAX 120 Minutes Reserved disk space MB 200 Least 200MB
Download Pdf Manuals
Related Search