User Manual - SVT Innovations
Contents
1. SVT 4100 ACCESS CONTROL KEYPAD SVT19110 User Manual Please read this user manual prior to installing the system and keep it well for future use SVT 4100 ACCESS CONTROL KEYPAD SPECIFICATIONS WW G 8 Matrix Keypads 3 Case screw Technical Parameters Ambient temperature 20 C 60 C Relative humidity lt 95 Operating Voltage DC 14 5V Standby Current lt 90mA Operating Current lt 120mA INSTALLATION without the rain guard Install into the wall gem Screw hole Screws fix with button case m N INSTALLATION with the rain guard Screw anchors Rain cover Screws e r e I Lb Wall hole Screws fix with rain cover WIRING CONNECTION Back ______o Power supply Red DC 14 5V o White Unlock button Purple NC COM Lock NO Connect to main board module J1 A er defaulted programming 2 In the programming mode set 40 groups of 4 digit codes for door open Set programming code 1 Switch off the power press and hold switch on the power After hearing a long sound release 2 After the long sound stops another sound is heard now you can enter the new 4 digit programming password 3 After entering the new password a DI sound can be heard for 5 times Enter to2. the programming mode 1 Press DI sound should be heard twice and then enter 4 digit programming password DI sound should be heard three times with LED light flashing It indicates entering to the programming mode successfully 2 Press to exit the programming mode with DI sound in five times Set unlocked time Factory default setting is 5 seconds 1 Enter to the programming mode first 2 Enter code 00 and DI sound should be heard twice 3 Enter the targeted unlocked time 2 digits 01 99 seconds 00 is not valid in this mode 4 After DI sound is heard for three times it will return to programming mode 5 Press to exit the programming mode OPERATION Add user passwords Enter to the programming mode first Enter position 01 30 31 40 can not set unlocked time as they are normal open closed Enter 4 digit password If long DI sound is heard twice it indicates password stored fails and this password exists somewhere else If DI sound is heard for three times it indicates password stored succeeds Return to the programming mode Delete user passwords 1 Enter to the programming mode first 2 Enter position 01 30 3 Press to delete the password stored in 01 30 4 After DI sound is heard for three times return to the programming mode Delete user passwords directly 1 Enter to the programming mode first 2 Press After DI sound is hear
3. d twice then enter 4 digits password for deletion 3 After DI sound is heard for three times it indicates the password has been deleted and return to the programming mode Delete all settings 1 Enter to the programming mode first 2 Press After DI sound is heard twice press again Anther DI sound is heard twice 3 Then press for seven times the system deletes all the setting The unlocked time changes to 1 second and the programming password does not change After hearing DI sound for five times the system reset and all the user passwords are deleted The design and specifications of this user manual can be changed without any notification to the user All copyright and interpretation rights are reserved to SVT Innovations Inc
Download Pdf Manuals
Related Search