USER MANUAL - ECLER Dj Division
Contents
1. 8 8 8 2 2 2 8 8 san K gt 3OVARIN ET TOULNOD i wana wan 7 wana ANON lt Old 2 SHOLIMS AL solos Suaov 22 SHALAWOILNZLOd FYIMIYIJ INIT ONOHd e s uci Ox Ou MM Ox e WOLNVHd M o vw L 2 MEE a 4 J 2 OW INOW L L Y ONOHG k 38 39 ECLER Laboratorio de electro ac stica S A Motors 166 168 08038 Barcelona Spain DJ DIVISION INTERNET http www ecler com e mail info ecler es 0138 01 002. e Relative when the controller is used it sends incremental control change CC messages This means the send value is the increment expressed as signed binary towards the controllers actual value This increment can be 1 2 3 or 4 depending on the rotation speed if the user turns the encoder clockwise or 127 126 125 or 124 depending on the rotation speed if the user turns the encoder counter clockwise relative complement at two coding increment 001 064 decrement 127 065 e Absolute the controller sends control change CC messages when it is used The value is given by an internal counter between 0 and 127 that increments the value when the encoder is turned clockwise decrements when the encoder is turned counter clockwise e Up amp Down the controller sends consecutive note ON and note OFF messages when it is being manipulated It uses a note value if it is being turned clockwise note up and a different note value when it is turned counter clockwise note down e Realtime Start Realtime Stop Realtime Continue if the controller is configured this way the EVO5 sends a MIDI Realtime Start or Stop or Continue respectively message when the controller is pressed MIDI om The controllers of the MIDI section which are located TRAKTOR 3 DECK around the display also have a visible label on screen that make it easy to remember which command they execute LAYOUT NAME which makes their usage comfortable and secure
3. TRANSFORMER e PANORAMIC 07 PITCH e PITCH I EE COE 03 08 REVERB e VOCODER 09 VOCODER The basic effects are completely editable Effects available for the user personalized The EVOS s effects unit allows you to use any combination of 2 basic effects FX1 FX2 in chain and simultaneously All effect presets that are available for the EVO5 s user are fact two chained basic effects This is the reason why in the left part of the display always appears the option to select FX1 or FX2 the two chained basic effects and the correspondent name to remember you which basic effect you are working with If you wish to use only one effect select NONE for 1 or FX2 The user can rename save and use the effects edited as own effects You can save up to 64 fully personalized effects in the mixer s memory The effect s name appears in the screen s header The EVO5 includes some demo effects created by prestigious international DJ s who are also members of the ECLER PRO TEAM The creation and edition of effects allows you to create new sounds and adapt the effects to your musical style which converts this powerful processor into a source of unrivalled creativity Selecting an effect To select an effect hold the EFFECTS controller 33 pressed and press at the same time some of the 6 shortcut ete 34 controllers placed at both sides of the display The selected effect will appear on screen If you wish to select any
4. 1 173 l INO LLOS 1 LINDYID V3 35 14 Q N 36 FUNCTION LIST Microphone XLR JACK combo connector MICRO Overload indicator OVL Input selector MIDI mode indicator Input sensitivity adjust GAIN Treble control Midrange control MID LED VU Meter Bass control LOW Prefader listening control PFL Fx Send controller FX Send switch to effect bus FX SEND Send switch to talkover TALKOVER Send to XF switch A OFF B Fader Crossfader control A B FX PFL monitoring switch FX PFL Effect mix crossfader DRY WET Crossfader Shape adjuster XFADER Fader Shape adjustment FADER SHAPE PFL MIX monitoring crossfade SELECT Headphones volume control LEVEL Stereo jack headphones Volume control OUT 1 Volume control OUT 2 Left and Right signal sum L R Balance control BAL LED VU Meter VU meter display switch OUT1 MIX OUT2 Top Recording RCA connector REC OUT SETTINGS switch MIDI switch EFFECTS switch MIDI control buttons and on screen software Display MIDI control encoders and on screen software Effects control encoder PARAM 1 Effects control encoder PARAM 2 Effect launch to PGM button LAUNCH Microphone XLR JACK combo connector MICRO Micro input sensitivity adjustment TRIM Phono input PHONO Line input LINE Recording output REC Ground pin GND Lef
5. Any change in the configuration of the unit must be carried out by a qualified technician Should any connection disconnection task be done always disconnect the unit from the mains supply CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warranty Descriptions Your ECLER equipment has undergone exhaustive laboratory and quality control tests before leaving the factory Nevertheless your may be in need of our Technical Service during the period covered by the Guarantee or afterwards In that case carefully protect your equipment in its original packet and send it to our Technical Service with the transport and insurance paid Attach a photocopy of your Guarantee Certificate and a detailed description of the defect you have observed ECLER S A guarantees the EVO5 mixer against material defects and manufacturing faults for the period of one year starting from the original purchase date ECLER S A will repair the defective equipment within the aforementioned period with no charge for parts and labour To ensure the validity of the Guarantee it is essential that the attached Guarantee Registration Card is filled out correctly and remitted to your ECLER distributor within 10 DAYS after date of purchase The Guarantee is non transferrable and protects the original buyer only The Guarantee does not cover Damages caused by mistreatment or negligent handling lack of elementary precautions disregard to the instructions in the manual
6. 3 to 12dB Baxandall F1 200Hz 50Hz to 2kHz F2 6 3kHz 1kHz to 10kHz Gain 10dB 3 to 12dB Micro input F1 1 2kHz 305Hz to 5kHz Q 1 5 1 to 20 Gain 12dB 3 to 12dB Talkover Release time 0 5 3 sec Attenuation 6 to 30dB Micro effects kl Mode ON OFF Noise Gate Th 80 to 0dB Compression 0 to 100 28 OFF OUT 1 OUT 2 0 dB 10 to 10 0 3 6 dB 0 3 6 dB Outputs Limiter 8 Select Threshold Sensibility 8 OUT 1 OUT 2 REC Signal MIX PFL mm Shape XFader Adjust cut in time 2mm left 1 to 8mm 2mm right 1 to 8 DRY WET iH Adjust shape 0 to 100 50 Internal MIDI Clock 100 200 BPM Source BPM Range iH 110 220 MIDI MIDI Clock Output id OFF ON Monitor MIDI OFF ON MIDI Settings Mixer input 0 4 AUDIO 0 18 dB 10dB 0 18 dB 10dB FireWire Mixer to computer Inputs 1 4 MIX PFL Computer to mixer ki Inputs 0 4 18 0dB 10dB MIX 18 0dB 10dB 8 Unit password 29 30 8 User password Version Sampling rate Display Brightness Disable User configuration Load Config 1 Config 2 8 Config a Save Config 1 Config 2 a Config 8 Change passwo
7. 8 characters From now on you will have to enter this password if you want to access this configuration If you want to delete a password introduce a void password There are other elements as for example e Adjusting the output compressor e Adjusting the output sensitivity These elements which compromise the entire audio chain are protected with a special password and can only be edited using this password This password is called UNIT password The default UNIT password is ECLER but you can change it if you enter SETTINGS ADVANCED CHANGE PASSWORDS UNIT Restore the factory default configuration The option SETTINGS ADVANCED RESTORE allows you to recover the factory default configuration This includes The default effects PRESETs you will loose your modifications and the effects you added The initial MIDI LAYOUT you will loose your modifications and the layouts you added The configurations 1 2 3 USER passwords will be deleted The UNIT password will be set to the factory default ECLER To access this option first you will have to enter the UNIT password What to do if you forgot a password You can delete user passwords using RESTORE If you forgot the UNIT password press the encoder 2 during 3 seconds when the actual screen is the one where you introduce the password A code appears You have to communicate this code to ECLER and you will be given the necessary password 31 11 FURTHER CONSIDERATIO
8. For example to access the pattern 23 with a shortcut press MIDI 32 and the LOAD encoder search pattern 23 in the list and select it Now press the one of the 6 shortcut buttons you want to assign as a shortcut Editing MIDI controls You can comfortably configure and programme the EVOS s MIDI control with the mixer s controllers Press MIDI 32 and SETTINGS 31 simultaneously The MIDI button s led turns orange and on the display appears a menu with the following sections MIXER MIDI control for the channels 0 4 From the MIXER section you can set the controllers from the channels 0 4 to MIDI mode Selecting MIDI the channel works as a MIDI controller Selecting AUDIO the channel works as a traditional mixer audio controller The 5 configuration is independent for each channel and a blue led turns on when MIDI mode is selected When a channel works in MIDI mode its controllers gain tone fader only send MIDI data which means they don t affect the audio signal OMIDI 7777 01 TRAKTOR 3 DECK WHTRAKTOR 3 DECK S TRAKTOR 3 FX SSLIVE 6 V1 MIDI IN LO 3 DECK Ht MIDI Mixer m ys 5 0000 LIVE 6 FACIL LIVE 6 V2 CH205m LIVE 6 V2 CH306m m en 5 0000 Input 1 Input 2 Input 3 Input 4 CHANGE 5 9 move 25 CONTROL Edits the complete mixer s MIDI controls From the CONTROL section you can configure each of the O MIDI mixer s controll
9. From the control field LABEL you can edit these labels Select a label EMPTY and press ENTER to open the screen which allows you to introduce a name for the label or modify the existing name 9 Changes realized for controller only affect the actually enabled pattern lf you do not save the pattern you will loose your changes if you select a different pattern amp BACK NEXT X CANCEL AcursorR CHAR 4 26 Saving MIDI control pattern Once all the MIDI controllers are configured according to your wishes you need to save the pattern that you are editing The 5 offers you the possibility to save it using a name so it will be easy for you to remember it and to access the pattern whenever you want as any other section of the mixer To save the pattern you have to enter the MIDI control edit menu pressing simultaneously MIDI 32 and SETTINGS 31 The MIDI button s light will turn orange Press the SAVE encoder select any of the 64 available possibilities and press OK to access the screen that allows you to introduce a name or modify the existing name for your pattern To leave any of the screens from the MIDI control edit section press MIDI The light from the controller s led will turn back to the usual green colour Assign an EVO MIDI controller to your DJ software Once you have selected a pattern the controllers around the display will send MIDI data Now you will only have to connect them with
10. MIDI device to MIDI IN input all the MIDI data that arrive except MIDI clock will be forwarded to the computer via the firewire port This feature turns the EVO5 into a MIDI data converter from DIN 5 to firewire You may also send a MIDI clock signal to the EVO5 from another MIDI device which is not a computer MIDI OUT All MIDI data that arrives from the computer through the firewire port and is not addressed to the EVOS will be forwarded by this output This feature turns the EVOS into a MIDI data converter from firewire to MIDI Din 5 You may also send the MIDI clock signal from the EVOS if this has been activated via software CO Deck Minidisc Sequencer CO Deck Microphone Power amplifier CO Deck Controller MAINS INPUT JUVU JUVUUUL FUSE 1A 5x20 OUTPUTS INPUT mig in 7 TY b d 1 30 so IEEE 1394 R omi puqno une MICRO 5 P 2 PIN 1 GND PIN 2 HOT PIN 3 COLD slo ut J W mm 000 000 Turntable Turntable Computer Power amplifier Turntable Turntable 4 QUICK START We suggest you to visit our website http www eclerdjdivision com where you will find further information For the following procedure you will need CD player and headphones If you also wish to experiment with the MIDI controller and the internal soundcard you will also need a compu
11. create your own sounds and convert your sessions into a unique experience Using presets EFFECTS 7101 DELAY FX1 PingPong FX1 Feedback FX1 Filter FX1 Dry FX1 Level CANCEL EFFECTS 20 C 201 DELAY 00000 PRESET NAME CANCEL 5 CURSOR With the mixer s external software you can import export preset effect configurations from your computer This allows you to exchange configurations with other artists 22 7 INTERNAL SOUNDCARD Description The EVOS has an internal firewire soundcard with 12 input channels 6 stereo channels and 12 output channels 6 stereo channels The mixer s input channels and the soundcard s channels are assigned to each other as follows Channel 1 gt Firewire channels 1 and 2 Channel 2 gt Firewire channels 3 and 4 Channel 3 gt Firewire channels 5 and 6 Channel 4 gt Firewire channels 7 and 8 MIX gt Firewire channels 9 and 10 PFL gt Firewire channels 11 and 12 The mixer s output channels and the soundcard s channels are assigned to each other as follows Channel 1 Firewire channels 1 and 2 Channel 2 Firewire channels 3 and 4 Channel 3 Firewire channels 5 and 6 Channel 4 Firewire channels 7 and 8 MIX gt Firewire channels 9 and 10 INPUT 0 gt Firewire channels 11 and 12 same signal This powerful firewire soundcard has 24 bit stereo A D and D A converters The sampling frequency can be 96KHz 88 2KHz 48 2 o
12. faulty connection or accidents ECLER S A will not be held responsible for any direct or indirect damage loss or other damage originated by or relating to the set sets that have been manipulated altered or repaired other than at the authorized Technical Service centers the exterior fittings and electro mechanical parts nor their wear due to use shipping and insurance expenses nor for damages the set may incur during its transport This Guaranteed is valid only for repairs or services carried out at an authorized Technical Service Center The liquid crystal display is manufactured with high precision technology However some units may have pixels up to 4 that are continuously glowing or turned off This is not a malfunction 2 INTRODUCTION Congratulations for acquiring a genuine professional device The is the latest design from ECLER a legendary company from Barcelona with over 42 years of experience in designing and manufacturing professional audio equipment The EVOS is a perfect tool for today s DJs and producers thanks to its unique combination of a 12 channel firewire soundcard the highest digital audio quality with 24 bits and 96 KHz MIDI Control full colour display and a completely programmable effects processor This genuine mixer uses the best available components and 24 bit A D and D A converters in order to obtain the best sound quality Due to the over 40 years of experience in design
13. other effect which has no 9 DELAY PHASER shortcut assigned hold down the EFFECTS controller and press the LOAD encoder A list with the 64 available effects appears Select the one you wish E FILTER TRANS The shortcuts are very useful because they allow you to quickly access to the effects you use most The shortcuts 77772746422 PAN06 can also be configured For example you can access the effect 43 using a shortcut pressing the EFFECTS button 33 and the LOAD encoder Now search and select the effect 43 and press one of the six shortcut buttons to assign the shortcut 21 Editing effects Using the on screen effects controllers you can programme the effects parameters in real time The changes made in this mode will not be saved if you change to another effect When you have an interesting effect the EVO5 offers you the possibility of saving it using a name that allows you to easily remember and access it as often as you want as if it was another of the mixer s effects To save your effect you have to enter the effect edit menu pressing simultaneously the EFFECTS button 33 and the SETTINGS button 31 The EFFECTS button s light will turn orange In this section you can Change the basic effect FX1 BELAY ECHO 20 201 0 TYPE 926 FILTER DRY ASSI A TIME PINGPONG FEEDBACK P Press TYPE if you wish to change basic effect from the FX1 or FX2 section you are act
14. this hardware Ecler 5 Ecler 05 Z has not passed Windows Logo testing to verify its compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has evoASID dll passed Windows Logo testing To C AWINDOWS system32 Continue Anyway STOP Installation Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for Ecler EVOS Z 1 Found New Hardware Click Finish to close the wizard Your new hardware is installed and ready to use A new pop up informs you that the installation has been successfully completed If you want to make sure that the drivers are correctly installed open the Device Manager where the mixer will appear as Ecler EVO5 in the chapter Sound video and game controllers a Computer Management File Action View Window Help mim m 2 m a El PCWINXP 97 14 Computer See Disk drives E Display adapters 2 DVD CD ROM drives Floppy disk controllers 23 Floppy disk drives Computer Management Local System Too
15. 6000 OUT2 OdBV 3 6 dBV soft configurable 6000 Output Limiter on OUT1 or OUT2 10dBV to 10dBV 3 band compressor REC OdBV 10kO MIX or PFL routed via software Headphones 0 2W 200Q 1 THD Midi IEEE1394 Din 5 180 THD N Line lt 0 006 Phono lt 0 01 Micro lt 0 01 Signal N Ratio Line gt 100dB Phono gt 96dB Micro gt 95dB CMRR Micro gt 70dB 1kHz Talkover Attenuation 6 to 30 dB soft config Release time 0 5 to 3 sec soft config Micro Noise Gate 80dB to 088 Micro Compressor 0 to 100 efficiency Xfader cutting time soft adjust from 1mm to 8mm left amp right independently Shape Soft adjustable on Xfader Faders 8 Dry Wet BPM automatic from 60 to 220 bpm in 6 ranges internal or MIDI clock reference Firewire input routing levels from 18 to 0 dB Firewire output routing levels from 0 to 18 dB 33 Tones Full configurable bypassable including Microphone parametric Built squelch on unused channels Phantom voltage 17 5VDC 5mA max Input Gain from to 10dB Mains 90 264VAC 47 63Hz Power consumption 50VA Dimensions 432 6x370x80mm Weight 6 4kg Specifications and appearance are subjected to change without notice Since the software is upgradeable some values may differ from one version to another due to improvements 34 13 CONFIGURATION DIAGRAM 330 WOLNVHd WOLNVHd
16. B To obtain an optimal mix adjust the input level so that the value shown on the VU meter stays always close to 0dB and make sure you never reach the clipping level using the red LED s from the VU meter and the OVL indicator from each channel as reference Equalization The rotary tone controls for each channels provide a 10 30dB boost cut at high 9 and low frequencies 6 and 10 258B at the mid range 7 This great attenuation range is specially designed for creative live performance The tone control is completely editable via software see chapter 10 settings menu which allows you to choose the style frequency range and gains The type and the configuration chosen via software are common to the channels 1 4 but can be different for the microphone channel You can bypass the tone control via software which disables this function ATTENTION Use equalization carefully by boosting too much the low frequency range you can induce an excessive displacement of the speakers membrane Monitoring System The EVO5 is equipped with an easy and flexible monitoring system that allows the artist to adjust with great precision the effects and mix levels for each input channel using the VU meters and headphones Each channel as well as the effect processing can be monitorized visually and pre listened pressing the dedicated PFL 10 and or FX PFL 17 yellow led button Each channel has a VU meter that shows the PFL L R signal level A main VU m
17. D players The mixer has a 370 mm depth and zT H 432 6 mm width format The optional metallic side profiles kit allows you to EL eee firmly fix your mixer to the surface over which it is placed or over its own SO 6 profiles These profiles also allow to tilt the mixers position for an easier operation Because of the high gain of the PHONO and MICROPHONE inputs always try o5 to place the mixer as far away as possible from noise sources dimmers engines etc and mains wires For the very same reason and under any circumstance you should never remove the unit s metallic cover The power consumption of the EVOS is very low so they do not need any cooling but you should avoid extreme temperatures and the atmosphere should be as dry and dust free as possible The EVO5 operates now with a new universal input power supply Switching Power Supply and can perfectly works without any internal modification from 90V to 264V 47 to 63Hz Make sure that the mains wire is far away from the signal cables in order to avoid any possible audio hum In order to protect the unit from an eventual electrical overload it carries a T 1A fuse Should it ever blow up unplug the unit from mains and replace it with an identical one If the new fuse blows again contact immediately with our authorized technical service NEVER SHORT CIRCUIT THE SECURITY PATH NOR USE A HIGHER VALUE FUSE CAUTION Fuse substitutions have to be perf
18. N AND USAGE Start up This can be done pressing the POWER switch 53 located at the back plate and immediately the EFFECTS MIDI and SETTINGS controllers will glow up green and the mixer s welcome screen will appear The is equipped with automatic mute circuits on all main outputs which activate during the mixer s power up power down and during changes in the sampling frequency Thanks to these circuits the introduced noise due to turning the EVO5 on or off is the lowest possible However it is strongly recommended to turn on all the devices in the following order 1 Sound sources 2 Mixer equalizers active filters 3 Finally power amplifiers Powering off should be done by following the exact reverse sequence in order to avoid any possible damage to the loudspeakers Control Description Input selector The channels 1 4 have a tilting input source selector 3 which allows the user to choose between different types of input turntable PHONO CD player or similar LINE or a stereo channel from the internal firewire soundcard Channel GAIN All the EVO5 input channels have an accessible input sensitivity GAIN control 5 The GAIN controls adjust the input level of each channel in order to compensate the different sources connected to the mixer The gain adjustments have to be executed with extreme care using the VU meters 8 and the OVL 2 as reference The standard reference level used to mix audio signals is Od
19. NS Ground loops Ensure at all times that no signal sources reaching the mixing desk and no devices connected to its output have their earths interconnected that is earth should never reach them via two or more different paths as this could lead to humming which could even interfere with sound reproduction quality order to avoid earth loops ensure that the shielding of cables if connected to the chassis are never connected with each other Audio connections As a general rule of thumb make the signal connections as short as possible and use the best connectors and cable available Cables and connectors are frequently held cheap forgetting that a bad connection can result in a poor sound quality Cleaning The front panel should not be cleaned with dissolvent or abrasive substances because silk printing could be damaged To clean it use a soft cloth slightly wet with water and neutral liquid soap dry it with a clean cloth Be careful that water never gets into the unit through the holes of the front panel 32 12 TECHNICAL CHARACTERISTICS AD DA 24 bits converter 96kHz default 88 2kHz 48kHz 44 1kHz selectable 32 64bits DSP engine Frequency response 1dB 3dB Line 10Hz 30kHz Micro 10Hz 28kHz Phono RIAA 0 5dB 20Hz 20kHz Input sensitivity Impedance Line 0dBV 20kO Phono 40dBV 50kQ Micro 50 to 30dBV gt 1kQ Output level Min Load OUT1 OdBV 3 6 dBV soft configurable
20. USER MANUAL DOS ECLERSIO AUDIO CREATIVE POWER LIST OF CONTENTS 1 IMPORTANT REMARK 04 2 INTRODUCTION 05 3 INSTALLATION 06 4 QUICK START 09 5 OPERATION AND USAGE 15 6 EFFECTS PROCESSOR 19 7 INTERNAL SOUNDCARD 23 8 MIDI CONTROL 24 9 SETTINGS MENU 28 10 SETTING UP YOUR MIXER 31 11 FURTHER CONSIDERATIONS 32 12 TECHNICAL CHARACTERISTICS 33 13 CONFIGURATION DIAGRAM 35 14 FUNCTION LIST 36 15 FUNCTION DIAGRAM 37 16 BLOCK DIAGRAM 38 All numbers subject to variation due to production tolerances ECLER S A reserves the right to make changes or improvements in manufacturing or design which may affect specifications 1 IMPORTANT REMARK License This product contains software elements subject to public software licenses as for example GPL and LPGL For further details you may visit http www ecler es gnu evo5 Safety Instructions In order to get the optimum operation and efficiency from your mixing unit it is VERY IMPORTANT before you plug anything to read this manual very carefully and take seriously into account all considerations specified within it We strongly recommend that its maintenance be carried out by our Authorised Technical Services This apparatus must be earthed through its mains cable Do not expose the unit to rain or water splashes and do not place liquid containers or incandescent objects like candles on top of the unit Do not obstruct the ventilation shafts with any kind of material
21. VO5 If your hardware came with an installation CD 4 or floppy disk insert it now What do you want the wizard to do O Install thi oi Next to continue Introduce manually the complete drivers path or select it with the Browse option Found New Hardware Wizard Please choose your search and installation options SS Y Search for the best driver in these locations Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver found will be installed C Search removable media floppy CD ROM Include this location in the search DADRIVERS Don t search will choose the driver to install Choose this option to select the device driver from a list Windows does not guarantee that the driver you choose will be the best match for your hardware lt Next gt JA Cancel 12 Browse For Folder Desktop a My Documents P My Computer 3 Floppy S Local Disk C 5 Documents and Settings DRIVERS Program Files C3 WINDOWS CD Drive D Shared Documents To view any subfolders click a plus sign above Cancel When the warning appears press Continue Anyway Finish the installation Hardware Installation Found New Hardware Wizard Please wait while the wizard installs the software The software you are installing for
22. als that are assigned to both of its sides With this selector in position A or B you assign the channel to one of both sides of the crossfader The OFF position disables the crossfader s function on this channel 11 Adjust the crossfader curve The XFADER SHAPE controller 19 allows a fine adjustment of the crossfader curve s slope Setting this controller all left the signal is diminished when the crossfader reaches the central position which allows mixing two songs with a soft melting The crossfader curve s slope increases if the controller is turned to the right When is gets completely turned to the right the signal enters very fast with hardly a movement of the crossfader This is very useful for scratching 12 Select an effect Hold the EFFECTS controller 33 pressed while you press at the same time one of the six shortcut controllers 34 located at both sides of the display The selected effect appears on screen If you wish to select more effects hold down the EFFECTS button and press the encoder identified on screen as LOAD A list with up to 64 effects or personal combinations appears Select the one you want 13 Enable an effect Turn the effects send potentiometer 11 completely to the right With this controller you can set the amount of signal level you want to send to the effects processor Press the FX SEND button on channel 1 12 to enable the signal send to the effects processor Sending can be activated ind
23. annels you wish 18 Play back a digital sound file Once your soundcard is correctly configured play back a digital music file with your DJ software Set the input selector 3 on channel 1 to FireWire CH1 2 position The channel s VU meter will lighten up and you can adjust the input signal with the GAIN and tone controllers as you did before with the analogue signal 19 Select a MIDI control pattern The EVO5 offers 64 different MIDI control patterns and configurations for applications as LIVE 6 and TRAKTOR 3 Press EFFECTS 33 and the encoder identified on screen as LOAD A list with 64 available patterns will appear Select an EMPTY pattern and try using it 20 Assign a command to a MIDI controller Each DJ application uses a different MIDI configuration procedure Take your time to get through all the MIDI control possibilities offered by your software and to find out how to programme them Now select the function you want to control and move the mixer s controller you want to execute this function when the MIDI device asks you to do so The device will identify the MIDI note sent by the mixer From now on you will be able to remote control this function The controllers located around the display send MIDI data if this mode has been activated using the MIDI button 32 The channel and output controllers instead have to be configured to send MIDI data a blue LED indicates that the input channels are working in MIDI mode 5 OPERATIO
24. cessor working at 24 bits and 96 KHz Using the 9 fully editable basic effects the EVO5 offers the novel possibility of chaining two of these effects to create new and more creative effects Up to 64 different effects can be named and saved in the mixer s memory A precise BPM counter with a reliable indicator synchronizes the effects On the other hand the revolutionary pattern synchronization function allows controlling the effects in an extremely creative way There are also 2 effects dedicated to channel 0 MICRO Noise gate and compressor Both are also fully editable Effects configurations can be imported and exported from a computer via firewire using the external software included This allows you to share your effects with other artists Effects controllers FX SEND RESTART FX SEND button 12 A flexible multichannel assignation system allows the user to process simultaneously multiple input channels The FX SEND button sends the signal to the internal effects processor If the LAUNCH button is disabled the FX SEND works pre fader so signal monitoring is possible using FX PFL If the LAUNCH button is enabled the FX SEND works post fader FX potentiometer 11 The FX potentiometer adjusts the level of the signal sent to the effects processor This adjustment is independent for each channel PARAM 1 encoder 37 This encoder controls one of the selected effect s parameters The pa
25. d the effects signal is not sent to the main output and the selected channel FX SEND is pre fader processed This allows monitoring the effects settings with the headphones without affecting the main output From the moment you enable the LAUNCH button the signal taken behind the DRY WET crossfader is sent to the main output The selected channel FX SEND is now post fader processed which means that the effect s mix level depends also on the channel fader This feature allows listening to the effect s tail when the channel fader is turned down On the other hand effect signals that include a DELAY unit and are activated with the fader turned down will suffer an audible delay On screen effects controllers If you wish to edit the effects parameters in real time press FX1 or FX2 and all the available parameters will appear You can edit all parameters using the 4 encoders 36 located under the display On screen you will see 2 rows with up to 4 parameters Each encoder controls the 2 parameters located immediately above the encoder The active parameter will appear highlighted You can change the inactive parameters by pressing the encoder The changes you make in this mode will not be saved if you change to another effect 20 Effects description Basic effects G EFFECTS DELAY The EVO5 has 9 basic effects 01 DELAY DELAY ECHO LT FLER 03 FLANGER e FLANGER Eo PHASER e PHASER 02
26. der All channels except the MICRO channel channel 0 can be assigned to the 55 crossfader using the A OFF B switches located on all the channels 14 The positions A and B assign the signal to one of both sides of the crossfader while the OFF position disables the crossfader s function on this channel The SHAPE XFADER 19 adjusts the slope of the crossfader s curve The range of adjustable positions allows the creation of a soft melting between two music tracks controller set completely to the right side as well as fast cuts which are excellent for scratching techniques controller set completely to the left side Via software you can also adjust the CUT IN TIME in millimetres which is the distance between the physical end of the crossfader and the first entrance point of the signal The EVO5 is compatible with the ECLER ETERNAL scratch crossfader with inductive technology based on magnetic control system This contact less technology combined with an exclusive magnetic sliding system offers a soft feeling and one of the most precise crossfaders that actually exists The inductive ETERNAL crossfader has been specifically designed for extreme turntablism techniques which require an extremely smooth and fast crossfader movement Internal effects controls Please read chapter 6 TALKOVER function The microphone channel 0 has a TALKOVER function The red glowing button 13 activates the TALKOVER which diminishes the prog
27. e located on the back plate 44 and the other located on the control surface 30 These two REC outputs are connected in parallel but they can be used simultaneously without any problems The nominal output level is 0dBV 1V for both REC outputs Using the software it is possible to select the signal source for the REC outputs which can be either the MIX signal default or the PFL signal Headphones In order to obtain an optimal performance during their operation the headphones should have high impedance 200 6000 Headphones are connected to the headphones output 23 located on the controllers plate normalized stereo jack or 3 5mm mini jack is provided for this connection The sleeve is ground the ring is the right channel and the tip the left channel Digital connections Firewire port On the mixer s back plate there are two firewire connectors 50 with 6 pins IEEE1394 that work as a hub The firewire port allows connecting the mixer to a computer and send up to 12 audio input channels 12 audio output channels and even the MIDI control data MIDI IN MIDI Musical Instruments Digital Interface is a standard communications protocol for connections between electronic musical instruments and computers The procedures of connecting and controlling MIDI devices are described in chapter 8 MIDI control The MIDI IN connector 52 is DIN 5 180 which allows you to connect other MIDI devices to the If you connect a
28. elivered from factory with enabled phantom power See configuration diagram Audio outputs connections OUT 1 Main power amplifier OUT 2 Booth Room2 power amplifier REC frontal Recording device 1 REC posterior Recording device 2 Headphones Headphones OUT 1 This stereo output is the one to feed the PA system using balanced XLR3 connectors or unbalanced RCA connectors The nominal output level for OUT 1 46 47 48 is set to 0dBV 1V which can be modified via software to 0 3 or 6dB The OUT 1 s output volume can be controlled using the OUT 1 potentiometer 24 Near the OUT 1 controller you will find the L R switch 26 which adds left and right signals from OUT 1 and OUT 2 outputs This function is especially useful if a malfunction occurs on one of both channels during a session for example a bad contact of the turntable s needle Activating this switch the mixer sends the sum L R to the loudspeakers so that the major part of the audience will not notice this failure OUT 1 and OUT 2 are equipped with a balance controller BAL 27 OUT 2 Normally this one is used to obtain an independent output for the DJ booth This stereo output OUT 2 49 equips unbalanced RCA connectors and its nominal output level is set to 0dBV 1V which can be modified via software to 0dB 3dB or 6dB The OUT 25 output volume can be controlled using the OUT 2 potentiometer 25 Record outputs There are two REC outputs which use RCA connectors on
29. ependently for each channel which makes sound edition more flexible Now press the LAUNCH button 39 and move the DRY WET 18 crossfader which melts the original signal DRY with the processed signal WET If you want to monitor the effects signal press FX PFL 17 even if you have not pressed LAUNCH 14 Adjust an effect Move the PARAM1 and PARAM2 controllers 37 38 to adjust the effects sound The parameters you are adjusting appear on screen If you wish to adjust any other parameter press the controller identified on screen as FX1 2 and all parameters that can be adjusted in real time appear on screen Adjust the effect using the four encoders located below the display 36 If you wish to get started using the MIDI control and the internal soundcard you will need a computer with firewire connection and a DJ software with MIDI capabilities The EVO5 includes configuration presets to control applications as Ableton s LIVE 6 and Native Instruments TRAKTOR 3 We suggest you to download the demo versions of these applications from the owner s website if you do not have any of this software 15 Connect the mixer to the computer Together with the mixer you will receive a firewire cable IEEE1394 Connect this cable to the firewire port on your computer and to one of the two firewire ports on the mixer 50 Through this firewire cable all audio and MIDI data is sent between mixer and computer It is not necessary to u
30. ers 50 that they send different types of om TRAKTOR 3 DECK messages depending on the specific requirements of the external device to be controlled Take your time to understand all possibilities of controlling MIDI your software offers and how these possibilities are programmed Selecting this option a message appears asking you to MIDI Channel move the controller you want to configure When you do E MIDI Note this the options that depend on which controller is being Label configured button potentiometer or encoder will appear The available options for the TYPE field are E e Unused the controller does not send any MIDI message BACK CONTROL SAVE JL ENTER MOVE e Controller the controller sends control change CC messages when it s being manipulated The parameters that appear when selecting this option are the MIDI CHANNEL between 1 and 16 and the MIDI control change number MIDI CC between 0 and 127 e Note On amp Off the controller sends note ON messages when it is pressed and note OFF messages when it is released The parameters that appear when selecting this option are the MIDI CHANNEL between 1 and 16 and the number of the used note MIDI Note between 0 and 127 e Note On the controller sends only a note ON message when it is pressed The parameters that appear when selecting this option are the MIDI CHANNEL between 1 and 16 and the number of the used note MIDI Note between 0 and 127
31. eter with two columns L and R show the OUT 1 MIX or OUT 2 signal level depending on the position of the selector located just above the VU meter 29 For HEADPHONES monitoring the SELECT PFL MIX rotary potentiometer 21 allows you to blend a selected PFL together and or FX PFL with the main MIX Program The LEVEL rotary potentiometer 22 controls the level of headphones output Sending from channel to effects By pressing the FX SEND button 12 which glows up blue the channel s signal is sent to the internal effects processor A potentiometer allows adjusting the level of the signal sent to the effects processor between 0 and 100 11 For further instructions concerning the internal effects processor please read chapter 7 Faders The EVO5 equips ECLER s 60mm faders 15 These faders are very precise their movement is very smooth and they have a very fast cut The SHAPE FADER controller 20 adjusts the slope of the fader s curve which allows you to distribute the signal level over all the length of the fader For example you can select a linear curve controller in central position so that the signal level is raised progressively and proportionally to the fader s position Turning the controller completely to the right the signal enters at full level with hardly a movement of the crossfader Turning the controller completely to the left the signal enters at full level when the fader is about to reach the opposite side Crossfa
32. ewing labels that allow you to know which function is executed by which controller in each moment The channel controllers can be individually set up to send MIDI data or to work as audio controllers The external software also allows to import and export MIDI configurations The mixer s display is unique in its class and converts the into the world s first mixer that offers such a feature This high quality display with 320 x 240 pixels raises the flexibility since it is possible to edit all of the mixer s parameters in real time Using the display you can adjust all of the mixer s functions as for example the tone controls the input and output sensitivities the fader and crossfader curves the MIDI controls the BPM counter even the output limiter that has been installed to tranquilize the sound technicians and engineers Finally this unique mixer has been designed by GIUGIARO DESIGN one of the world s most prestigious companies in product design and prize awarded as the best car designer of the 20 century With this design GIUGIARO has been looking for a perfect harmony between the well known and plain ECLER design and the innovation of such a revolutionary product as the EVO5 3 INSTALLATION The first thing to take into consideration when placing your EVO5 is your comfort and an easy access to all the connections The EVO5 is basically conceived as a tabletop mixer and its usual placement will be between two vinyls or C
33. ing professional audio equipment the circuits are very efficient and the digital sound has the same warmness as any analogue device All circuits are manufactured and tested in our factory in Barcelona The internal soundcard has 12 input and 12 output channels All of them have low latency thanks to the usage of firewire technology A single cable allows transmission and reception of all these audio channels and all the MIDI Control data This compact card turns the EVO5 into an ideal sound desk for music production live acts and the most advanced DJ sessions which combine the traditional vinyl CD players and avant garde software as LIVE or TRAKTOR The effects unit has a crystal clear sound due to the standard quality of 24 bits and 96 KHz All effects can be completely programmed There are 9 basic effects that can edited according to the user s needs and it is also possible to create new effects by chaining two different basic effects and programming them as wanted Up to 64 different effects can be created and saved Using a computer and the external software it is possible to import and export the personal effects configurations This allows you to exchange your sounds with other artists The MIDI control is nearly unlimited thanks to the 69 controllers and the 64 available parameter patterns The EVO5 wears a MIDI control section with 6 push buttons and 4 encoders which can be rotated and pressed The full colour display allows creating and vi
34. layer is correctly connected and that there is an audio track being played back You should also make sure that the tone and gain controls are in central position 6 Adjust the input level Move the GAIN control until the VU meter shows OdB Each channel s red overload LED OVL 2 lightens up if the input level for this channel is to high and has to be diminished with the channel s GAIN controller 7 Send the signal to the main output Set the fader on channel 1 15 to maximum and place the crossfader 16 on side A SHAPE 16 XFADER FADER ZO B 8 Listen to the signal with your headphones Press the PFL button 10 on channel 1 Adjust the MONITOR LEVEL controller 22 to obtain a comfortable monitoring volume Now you should hear music with your headphones Turn the MONITOR SELECT controller 21 to the right to crossfade the PFL signal and the MIX signal When this controller is completely turned to the right only the MIX signal will be monitored 9 Try the operation of the tone controllers Experiment with this powerful 3 way stereo equaliser 6 7 9 This tone control has been designed for a creative sound edition each way can be individually isolated using the big and ergonomic rotary controllers 10 Check the adjustment of the crossfader The channels 1 to 4 can be assigned to the crossfader 16 using the A OFF B selector The crossfader allows you to melt the sign
35. ls 9 Event Viewer Shared Folders Local Users and Groups Performance Logs and Alerts Device Manager torage Removable Storage Disk Defragmenter Disk Management Ba Services and Applications Services WMI Control Indexing Service 23 Human Interface Devices 2 IDE ATA ATAPI controllers amp IEEE 1394 Bus host controllers Se Keyboards Mice and other pointing devices Monitors 58 Network adapters Ports COM amp LPT S Processors Sound video and game controllers Audio Codecs Legacy Audio Drivers Legacy Video Capture Devices Media Control Devices SoundMAX Integrated Digital Audio O Video Codecs E System devices Universal Serial Bus controllers MAC OSX v 10 X The software will automatically detect and install the necessary drivers The mixer will appear as input output device in the System settings in the chapter sound If you wish to use the mixer as default soundcard on your computer open the Audio and MIDI settings and set the necessary parameters 17 Configure the soundcard for your DJ software Each DJ application has a different method to configure the soundcard Open your software and enter the audio device management section Your software will recognize the mixer s soundcard as Ecler EVO ASIO Driver Assign the soundcard s 12 input and 12 output channels to the software ch
36. ormed by a qualified technician Audio input connections MIC 1 Microphone 1 PHONO 1 Turntable 1 LINE 1 CD Deck 1 PHONO 2 Turntable 2 LINE 2 CD Deck 2 PHONO 3 Turntable 3 LINE 3 CD Deck 3 PHONO 4 Turntable 4 LINE 4 CD Deck 4 Phono Inputs Phono Turntables must be fitted with a magnetic cartridge with nominal output level of 40dBV 10 mV The PHONO inputs 42 of the EVO5 have a high headroom margin before saturation and it can handle higher output cartridges than what is usual Line Inputs The sensitivity of the inputs marked as LINE 43 is OdBV 1V You can connect sound sources such as CD DAT or MP3 players as well as keyboards and other instruments Microphone Inputs The MICRO inputs 1 40 are prepared for a nominal input level of 40dBV The connectors combine both JACK XLR3 formats With the TRIM controller it is possible to adjust the input sensitivity between 30 and 50dBV These microphone inputs are prepared for balanced signals which have to be connected as follows Hat or direct signal gt Pin 2 Tip Cold or inverted signal gt Pin 3 Ring Ground gt Pin 1 Sleeve Microphones must have low impedance 200 to 6000 and must be mono For unbalanced connections it is necessary to short circuit pin 3 to ground or the central ring The EVO5 equips an 18V phantom power supply for condenser microphones An internal soldering jumper allows enabling disabling the phantom power The EVO5 s MICRO channel is d
37. r 44 1KHz Firewire is a professional standard superior than USB and transfers all audio channels and MIDI data through a single cable with minimum latency and guarantee in front of audio stream breaks This powerful soundcard converts the EVOS into a perfect console for music production and live acts The EVO5 has 2 firewire connectors with 6 pins IEEE1394 These two connectors work as a hub so you can connect another firewire device to the unused connector Configuration Make sure that the drivers are correctly installed Connect your mixer to the computer open your DJ software and configure the Ecler EVO5 ASIO driver soundcard assigning the 12 input channels and the 12 output channels to the software channels you wish The internal soundcard s output channels are especially useful to record your DJ sessions or to send the signal from a turntable or CD player to the computer and process it with software effects 23 8 MIDI CONTROL Description The 5 allows controlling external devices using the MIDI protocol The MIDI commands assigned to each controller are completely editable and programmable by the user MIDI Musical Instruments Digital Interface is a standard communications protocol between electronic musical instruments and computers The MIDI device can work as a slave controlled or as a master controller The EVO5 works as a master unit to control other electronic musical instruments synthesizers sequencers
38. ram signal when there is signal present on the microphone The time that the program signal needs to recover as well as the amount of attenuation can be set via software OUT 1 and OUT 2 output levels The EVO5 equips two main output controllers OUT 1 and OUT 2 The OUT 1 level can be adjusted with the OUT 1 potentiometer 24 while the OUT 2 controller adjusts the OUT 2 level 25 Both can be monitored with the main VU meter using the OUT 1 MIX OUT 2 switch 29 and can also be edited with the L R controller and the balance controller BAL Via software you can assign an intelligent and fully programmable multiband compressor to one of both outputs see chapter 10 Settings Menu Screen descriptions SHORTCUT NUMBER EFFECT MODIFIED BY USER BPM INDICATOR EFFECT S NAME 2 BEAT SYNC BPM CONFIDENCE LEVEL 1 BEAT SYNC MOVING PHASE BPM SOURCE MIX FX MIDI CLOCK TAP EFFECT 1 TYPE HI e PATTERN DECAY EFFECT 2 f ASER MIDI COMMAND ASSIGNMENTS TRAKTOR 3 DECK TAP FUNCTION LOAD SYNC PLAYLISTS FOCUS list 8 TEMPO TURNING FUNCTION MIDI TRANSMISSION MIDI CLOCK TRAKTOR 3 DECK LAYOUT NUMBER TRAKTOR 3 DECK LIVE 6 V2 CH LAYOUT NAME TRAKTOR 3 FX LIVE 6 V2 CH2 LIVE 6 V1 LIVE 6 V2 CH3 USER ACTIVE PROFILE MENU TREE Outputs bd Shape BPM O MIDI Firewire 2 Advanced 6 EFFECTS PROCESSOR The EVO5 equips a powerful and completely programmable effects pro
39. rameter to be controlled can be easily selected via software Pressing this encoder you will execute the TAP function which allows introducing a rhythm sequence to manually synchronize the BPM counter You will have to press this controller at least 3 times to validate a rhythm sequence PARAM 2 encoder 38 This encoder controls a second parameter of the selected effect The parameter to be controlled can be easily selected via software Pressing this encoder you will execute the RESTART function which synchronizes this instant of the music with the beginning of the selected BPM pattern FX PFL button 17 Press the FX PFL selector to monitoring the effect The FX PFL signal is affected by the DRY WET crossfader 18 The effects processor can be continuously monitored If the LAUNCH button is disabled the FX SEND works pre fader allowing the signal s monitoring with FX PFL Once the signal is monitored and the effect s parameters are set enable the LAUNCH button 39 From now on the FX SEND works post fader which means that the effect s mix level can be also controlled with the channel fader DRY WET crossfader 18 The DRY WET crossfader allows melting the processed signal called WET with the original input signal called DRY You can adjust the crossfader s curve via software LAUNCH button 39 The LAUNCH button sends the signal taken behind the DRY WET crossfader to the main mix output If the LAUNCH button is disable
40. rds Unit password User password Firmware upgrade Restore Restore the original unit configuration except for outputs Back Up 10 SETTING YOUR MIXER Being aware of the fact that the mixer can be shared by different DJ s the same place the 5 can be personalized with three different configurations For each configuration the following parameters can be saved detailed with the symbol in the definition of the settings menu chapter 9 e Tone controls from channels 1 4 and MICRO independent Talkover and microphone effects Assign the MIX or PFL signals to the REC output Dry Wet shape BPM range MIDI clock out ON OFF Firewire input and output levels If you want to know the active configuration press SETTINGS and the text Config 1 2 or 3 will appear on screen under the title Configuration 1 is loaded when the mixer is turned on and can be accessed freely The configurations 2 and 3 can be accessed with the USER password To change the active configuration open SETTINGS ADVANCED USER CONFIG LOAD and choose configuration 2 or 3 The mixer s hardware will be immediately updated with this configuration You can access these configurations without password by default If you wish to protect them with a password please select the active configuration has to be the one you want to protect SETTINGS ADVANCED CHANGE PASSWORDS USER introduce and confirm the desired password up to
41. rhythm units software and even light controllers EVO5 s MIDI messages belong to the Channel messages System messages class It is essential that emitter and receiver of this messages use the same channel so they can communicate with each other The MIDI messages sent by each controller are completely programmable by the user The MIDI communication between the EVO5 and the computer uses a firewire connection The MIDI OUT connector 51 sends all MIDI data generated by the EVO5 and is useful to control devices with DIN5 connectors All MIDI information that arrives via firewire from the computer and which is not to be received by the EVOS will be forwarded by this output In this way the EVO5 works as a converter card for MIDI data from firewire to MIDI DIN5 It also allows sending the EVO5 s MIDI clock signal if this option has been enabled via software DIN5 180 MIDI IN connector 52 allows to connect other MIDI controllers to the If you connect a MIDI device to the MIDI IN input all information sent from this device excepting the MIDI clock will be forwarded to the computer via firewire In this way the EVO5 works as a converter card for MIDI data from MIDI DIN 5 to firewire It is also possible to send the MIDI clock signal from a MIDI device other than a computer The EVO5 transmits a continuous synchronization code called MIDI clock which allows synchronizing one or more external MIDI device
42. s The MIDI clock signal sent by the EVOS is relative to the beats per minute BPM calculated by the internal BPM processor If you wish to synchronize external MIDI devices remember that it is necessary to set these devices to slave mode external clock adjustment When the mixer is configured to send the MIDI clock signal the RESTART button generates the MIDI START STOP controls to advise the external device when it has to start detecting the external clock signal for some MIDI devices this is an essential requirement MIDI control configurations can be imported and exported from the computer using the external software included This allows you to share your MIDI control configurations with other artists Controller The mixers 69 controllers send MIDI data The EVO5 also has 64 different MIDI control patterns That means that each of the 69 controllers can send up to 64 different messages depending on the chosen pattern All the controls and patterns can be completely personalized You can configure the controllers of the channels 0 1 2 3 TRAKTOR 3 DECK and 4 so that they work as MIDI controllers or in standard mode A blue coloured led on each channel lightens up when the correspondent channel works in MIDI mode The channels configuration is totally independent which provides to the user a great flexibility EVO5 also has MIDI controller section with 10 buttons and 4 rotary encoders These controllers are placed aro
43. se the MIDI OUT output 16 Install the drivers The mixer is delivered with an installation CD 0D05 L J EFFECT ES MIDI GY PARAM I PARAM 23 38 39 a FIREWIRE cable Once mixer computer are connected proceed with the installation of the drivers that you will find on the CD by executing the following instructions The EVO5 is compatible with Windows SP2 and Macintosh OSX v 10 X operating systems Windows SP2 Once you connected the mixer to the computer the message New hardware found Ecler EVO5 will pop up i Found New Hardware gt Ecler 5 The new hardware found wizard will open Select the option No not this time and press Next Select the option Install from a list or specific location advanced Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission Read our privacy policy Can Windows connect to Windows Update to search for software O Yes this time only O Yes now and every time connect a device Click Next to continue Found New Hardware Wizard This wizard helps you install software for Ecler E
44. t channel balanced output OUT 1 L Right channel balanced output OUT 1R RCA output OUT 1 RCA output OUT 2 FIREWIRE connections MIDI Output MIDI OUT MIDI Input MIDI IN Power switch Fuse holder Mains socket 15 FUNCTION DIAGRAM Q7 ICRO 17 Sy PHONO OVL MIDI OVL MIDI OVL MIDI RECOUT O EFFECTS MIDI ETTINGS Le OVL MIDI Q 8 RESTART 4 N C pry E s s s N V N ls i gt 9 1 N MONITOR 2 3 16 EM 5 SELECT LEVEL i ESO B e MAINS INPUT Pre 00000 des b 9 5 9 9 OO OO 0 5226 LI IEEE 1 50 OUT2 OUTI emsan REC LINE 2 LINE PHONO LINE PHONO LINE PHONO TRIM MICRO 995 ap SECLERS 37 16 BLOCK DIAGRAM i arar VYAS ABOWSH HSV14 1 fido
45. ter with firewire connection 1 Set the controllers to their initial position Set the rotary controllers GAIN HI MID and LOW from channel 1 5 6 7 9 to the central snap in position Put the channel fader 15 down and move the A OFF B switch 14 to position A this channel is now assigned to the crossfaders A side 2 Connect the headphones Connect your headphones to one of the outputs on the mixer s front panel 23 Set the MONITOR LEVEL 22 to minimum and move the MONITOR SELECT control 21 to the PFL position MONITOR SELECT 3 Connect a CD player Connect a CD player to LINE input on channel 1 43 insert a CD and play the CD 4 Connect the mixer s power cable Connect the power cable to power source input 55 on the mixer s back side and turn the mixer on by pressing the MAINS INPUT switch 53 0000000000000000000000000000000000000000000000000000000000000000000000000 OUTPUTS INPUT 4 INPUT 3 INPUT 2 INPUT 1 5 etre 9000590100 OS 41 78 IEEE 1394 OUT2 REC LINE PHONO LINE PHONO LINE PHONO LINE 111119 MAINS INPUT FUSE T 1A 5x20 PINT eu PIN 3 COLD S 5 Select the input source Make sure that the input source selector on channel 1 3 is in LINE position and that the channel s VU meter 8 lightens up If this does not happen make sure that CD p
46. the commands of your favourite extern device Each device has an own MIDI configuration procedure Take yourself the necessary time to understand all the possibilities of MIDI control offered by your software and how to programme them very common method is to include a learn mode in the DJ software Select the DJ software s function you want to control and move the mixer s controller you want to execute this command when the device asks you to do so The DJ software will identify the MIDI note sent by the mixer From now on you can remote control the selected function Using presets Using the mixer s external software you can import and export preset MIDI configurations from a computer This allows you to exchange your control configurations with other artists 27 9 SETTINGS MENU From the settings menu you can configure the major part of the mixer s parameters The following explains the different menus and programmable parameters SETTINGS Default Factory Values Inputs Outputs Shape BPM MIDI FireWire Advanced Inputs Saved configuration EQ Bypass H Input 0 OFF ON Input 1 OFF ON Input 2 OFF ON Input 3 OFF ON Input 4 OFF ON Inputs 1 4 Kill F1 200Hz 50Hz to 2kHz F2 6 3kHz 1 2 to 10kHz Gain 10dB
47. ually editing Configure PARAM1 and PARAM2 You can choose which parameters are controlled by PARAM 1 and PARAM 2 Press ASSIGN and a list with the available parameters appears indicating if they correspond to FX1 or FX2 The indicators P1 and P2 appear besides the parameters which are actually assigned to PARAM 1 or PARAM 2 Select a parameter and press PARAM 1 or PARAM 2 The indicator P1 or P2 will appear besides the parameter Now press OK Save an edited effect Once you have programmed the effect according to your wishes press SAVE select one of the 64 available positions and press OK to access the screen which allows you to introduce a name for your new effect or modify the name it already has To leave any of the effects edit screens press EFFECTS The controller s led will turn to the usual green colour Example As an example we are going to create an effect as a combination of a FILTER and a TRANS In the effects edit screen press FX1 and then TYPE Now select the FILTER effect and edit its parameters according to your wishes Now press FX2 then TYPE select the TRANS effect and edit its parameters according to your wishes To save the new effect press SAVE select any of the 64 available positions for example number 04 and type in a name for example TransFilter The effects FILTER and TRANS are now chained creating a new effect which can be edited with the parameters of each basic effect In this way you can
48. und the mixer s display From this section you can configure and personalize the controllers creating and displaying labels for each controller amp LOAD amp SYNC PLAYLISTS FOCUS UST TEMPO 24 MIDI control patterns The EVO5 has 64 different MIDI control patterns That means that each of the 69 controllers can send 64 different messages depending on the selected pattern The controllers as well as the patterns can be completely personalized The mixer includes some preset patterns to control software e g LIVE 6 and TRAKTOR 3 To select a pattern hold down the MIDI buttons 32 and at the same time any of the 6 fast pattern selection shortcut 34 controllers which are located at both sides of the display On the screen will appear the labels that describe the function executed by each of the controllers from the MIDI section in each pattern If you wish to select any other pattern that has no shortcut MIDI gt 12m 01 TRAKTOR 3 DECK 01 205 5 00000 01 02 03 LIVE 6 V1 o CH1 05 LIVE 6 V2 CH2 06 LIVE 6 V2 CH3 07 LIVE 6 V2 CH4 08 EMPTY 09 EMPTY wv assigned hold down the MIDI button and press the LOAD encoder A list with the 64 available patterns appears Select the one you wish The shortcuts are very useful because they allow the user to instantly access the pattern he uses most often The shortcuts are also editable
Download Pdf Manuals
Related Search