user manual Videomatic VEO
Contents
1. Positioning of the remote control underneath the monitor Positioning of the remote control on the right side of the xy table 16 Description of the 3 buttons remote control unit Frontal view Colour mode selection Left button Power ON OFF Contrast brightness zoom autofocus line marker line cover Colour mode selection the right the following colour modes can be selected Position 1 Position 2 Position 3 Position 4 Position 5 Position 6 e O By turning the colour mode selection button from the left to full colour display black font white background white font black background green font black background yellow font black background yellow font blue background The chosen colour mode appears temporarily on the lower side of the screen when activated Note The above listed colour modes represent the factory settings Using the menu these colour modes can be adjusted individually Autofocus only available for Vario camera 17 Central zoom button O 18 Right button Power ON OFF By briefly pressing the Zoom button the video magnifier turns ON By pressing and holding the Zoom button for approx 4 sec the video magnifier can be turned OFF manually Zoom By turning the button to the left and to the right the magnifi cation will continuously change from minimum to maximum Autofocus By quickly press2. Menu selection ON OFF Illumination ON dim OFF mode Time adjustment for auto Time adjustment for auto turn OFF turn OFF Overviev mode Application is the same as with the one button control 19 20 Description of the 1 button remote control unit Front view Power ON OFF zoom colour selection Central button Zoom e Power ON OFF By briefly pressing the Zoom button the video O magnifier turns ON By pressing and holding the Zoom button for approx 4 sec the video magnifier can be turned OFF manually e Zoom By turning this button to the left and to the right the magni fication will continuously change from minimum to maxi mum Colour mode By pushing this button briefly when the video magnifier had turned ON the following colour modes can be selected Position 1 full colour display Position 2 black font white background Position 3 white font black background Position 4 green font black background Position 5 yellow font black background Position 6 yellow font blue background The chosen colour mode appears temporarily on the lower side of the screen when activated Note The above listed colour modes represent the factory settings Using the menu these colour modes can be adjusted to create custom colours Bottom up view Menu selection ON OFF Illumination ON dim OFF mode Time adjustment for auto Time adjustment for auto turn
3. adjustment range explication adjustment range from 50 to 50 adjustment range from 50 to 50 adjustment range from 50 to 50 OFF deactivate line marker and shadowing Ruler activate line marker Mask activate shadowing OFF deactivate line marker and shadowing Ruler activate line marker Mask activate shadowing 0 to 100 adjust line marker position 0 to 100 adjust shadowing Horizontal anlign line marker horizontally Vertical anlign line marker vertically Left Right Shadowing left right shadowing up to 50 Top Bottom Shadowing top bottom shadowing up to 50 Left Right FS Shadowing left right shadowing up to 90 Top Bottom FS Shadowing top bottom shadowing up to 90 Full Screen Shadowing covers whole screen 50 25 0 Red Green Blue AF Mode Reset to Factory Settings Recall User Settings Advanced Settings adjustment range from 0 to 31 adjustment range from 0 to 31 adjustment range from 0 to 31 Continuous Semi Automatic Semi Autom Zoom Continuous Zoom Return to factory settings Return to customer selected settings see overview Options are only availble for the Vario camera The camera types MD and RP are equipped with the Permanent Focus Technology Overview Mode Foreground Background Swap Fore Background Advanced Settings Color Combination Setup Anti Reflection Mode Auto 5 Monitor Brightness 100 Language English Perform White Ba
4. conditions for transport and storage have to be respected e Air pressure 700 1000 hPa Temperature range 5 to 50 e Relative air humidity 30 to 80 Disposal of the unit according to EU directive 2002 96 EEC Videomatic VEO contains of electronic components In order to avoid damage to the environment the country specific rules have to be respected Power supply Only use the original power supply which is included in the delivery by Reinecker Vision GmbH Caution The use of any other equipment might lead to an increased electromagnetic emission and to a product damage 10 Safety instructions Please follow the following safety instructions 1 10 Do not plug the AC adapter into a faulty electrical outlet Doing so may cause electrical shock or fire Do not touch the AC adapter with wet hands Only use the original power supply which is included in the delivery by Reinecker Vision GmbH The use of any other equipment might lead to a product damage Do not expose the system direct sunlight or to very hot or cold envi ronment as this would harm the picture quality Do not use this device below 5 C or above 40 C No liquids must reach the interior of the system Only use the device in a dry environment The device may not be used next to medical devices patients envi ronment Do not lean on the screen touch the screen with any object or lay heavy objects on the device This may cause damage t
5. is a device of protection class II The openings in the casing ensure optimum cooling and must not be covered Combination with other products Warning This reading system must not be located directly beside next or on top of another medical device If the device is used near another electrical device monitor the other device to ensure that it is working properly In case of doubt please contact Reinecker Vision GmbH or any licensed distribution partner Precautions by alteration of the performance of the system Stop using the reading device if technical features or performances should change Switch the device off and disconnect the power supply from the mains wall socket Refer directly to your dealer or to Reinecker Vision GmbH Service Center Reinstatement and installation This device may be technically maintained and reconditioned by Reinecker Vision GmbH only or by an authorized technician Reinstatement may only take place after the system has been cleaned and safety checked Cleaning of the system e Videomatic VEO has to be disconnected from the power supply before cleaning e The monitor and the system has to be cleaned with glass cleaner e Interior of device must NOT come in contact with liquids Special advice for transport and storage For reasons of safety the unit must only be transported and stored in the original packing The unit must be stored in dry and closed rooms in the original packing The following
6. overview when reading at a higher magnification level push and hold the yellow button for approx 3 sec The picture will be zoomed out A faded cross will appear and indicates the area that is currently being magnified Once the central button is released it will return back to the reading mode and selected magnification level Menu selection Keep the black button underneath the remote control pressed for approxi mately 3 seconds until the main menu appears on the screen Brightness 50 Contrast 50 Color Saturation 30 Ruler Mask OFF Ruler Mask Settings AF Mode Continuous Zoom Reset to Factory Settings Recall User Settings Advanced Settings Exit Autofocus only available for Vario camera Change the menu settings Turn the Zoom button from left to right in order to navigate through the menu Confirm your selection by pressing the zoom button Exit menu Either turn the Zoom button until you reach the menu selection exit and confirm it by pressing the Zomm button Or press the black button underneath the remote control until the menu disappears 23 Explanation of the menu content The image shows in detail how the menu is structured Function Menu settings Brightness Contrast Color Saturation Ruler Mask Ruler Mask Ruler Position Mask Position Ruler Mode Mask Mode Mask Transparency 24 Menu level 1 Menu level 2 Menu level 3 Menu level 4
7. OFF turn OFF Overviev mode Automatic switch OFF function Videomatic VEO is equipped with an automatic switch OFF function The VEO will automatically switch itself OFF if the remote control of the unit has been inactive for a pre selected period of time The automatic turn OFF function can be deactivated or set to one of three possible time frame settings By pushing both the black and the yellow button on the bottom side of the remote control simultaneously it will activate the function to change the automatic switch OFF time frame this can be set to 60 min 30 min 15 min auto OFF needs to be turned OFF manually Release the buttons when the choosen time setting appears The time setting will then be selected and stored Black button Yellow button Time setting options e automatic turn OFF deactivated e automatic turn OFF after 15 min e automatic turn OFF after 30 min e automatic turn OFF after 60 min Note Once turned OFF the energy consumption of the VEO is less than 0 5 watt 21 22 Lighting ON dim OFF By pushing the yellow button on the bottom side of the remote control the lighting can be e turned ON e dimmed e turned OFF When turning OFF the VEO the selected level of illumination will be saved Overview mode When you are working within a higher magnification level and want to find out which part of the page you have reached this function helps you to get the overview In order to get an
8. User manual Videomatic VEO ReINeCKER Reinecker Vision GmbH Sandwiesenstra e 19 64665 Alsbach H hnlein ReINeckeRr Konformit tserkl rung Declaration of conformity Wir erkl ren in alleiniger Verantwortung f r alle unsere Systeme dass diese mit den folgenden Normen oder normativen Dokumenten Ubereinstimmen We declare under our sole responsibility that the systems which have been brought into the market by us meet the requirements of the following directives Videomatic VEO Richtlinie 93 42 EWG des Rates vom 14 Juni 1993 Uber Medizinprodukte Risikoklasse nach Anhang IX Regel 12 CE Konformit t nach Anhang VII und RoHS II EG Richtlinie 2011 65 EU Council directive 93 42 EEC of 14th June 1993 concerning medical devices risk class according to Annex IX standard 12 CE conformity of Annex VII and RoHS II Council directive 2011 65 EEC Die CE Kennzeichnung auf dem Ger t dokumentiert diese bereinstimmung The CE mark on the system points out this accordance M Reinecker oe r Alsbach H hnlein M Reine ye a 08 10 2015 7 GG AAA O AAA n AO 3 ps Ort und Datum der Ausstellung Nae at nterschrift des Befugten Place and date of issue Nanfe and signature of the authorized person Contents l General information 0 000000 cece eee 6 Notes on the electromagnetic compatibility EMC 6 Storage of the user manual s es wwe keke oe bee aan 6 Product de
9. cial Settings Customize Buttons Zoom Push 1K Zoom Push 3K Zoom Hold 1K Zoom Hold 3K Bright Pull Advanced Settings Special Settings Store User Settings Recall User Settings Reset to Factory Settings Expert Settings Monitor size Special Settings Zoom Extension ON Max Digital Zoom 3 5x Customize Buttons Store User Settings Recall User Settings Reset to Factory Settings Expert Settings Monitor size Auto Return ON OFF OFF adjustment range from 1 5x to 15x Disabled Auto Focus False Color Disabled Auto Focus False Color Disabled Overview Disabled Overview Disabled Ruler ON OFF By pulling the button brightness contrast the line marker and shadowing functions will be activated Confirm selection to the user setting to save Confirm selection to the user setting restore Confirm to the factory setting restore Access only by authorized service Auto 24 27 28 Warranty Information 1 Reinecker Vision GmbH grants a warranty of 24 months warranty period only valid within the European Union against defects in manu facture counted from date of invoice ex Reinecker Vision GmbH All parts that have been replaced when repairing the unit will automati cally become property of Reinecker Vision GmbH Damage caused by improper use or by non compliance with the operating instructions will result in the invalidation of the warranty Interventions from persons other than R
10. ects automatically Thereafter automatic switch to semi colour mode 11 Insert replace batteries in remote control The remote control operates on 2 x AA batteries 1 5V e Detach the cover on the flipside of the remote control e Put in the batteries and make sure that polarity is correctly matched e Replace the cover onto the remote control using marginal pressure Clip Disposal of batteries Note Dispose of batteries according to the national guidelines 12 Installation of the system Your Videomatic system will normally be unpacked and set up by the supplier s representative If you have not purchased a Videomatic stand that fits to the product you must provide a solid surface for the system with sufficient surface area Note DO NOT remove the CCTV unit by holding it by the xy table Connection of unit Connect the power supply to a mains wall socket and plug the adapter end of the cord into the DC12V power supply socket located on the base of the Videomatic VEO Note The delivered power cable is to be used exclusively in connection with the Videomatic VEO Once the device is plugged in it is ready to use power outlet power input power cable 13 Alignment of monitor Due to the monitor s technology contrast and brightness change depend ing on the angle of view The highly flexible four dimensional monitor arm enables the user to adjust the monitors height and angle according to t
11. einecker Vision GmbH authorised specialists may lead to invalidity of warranty Not included in this warranty are light sources serving to illuminate the reading object batteries and other parts subject to wear and tear If a warranty claim is necessary the system has to be returned to the manufacturer in Alsbach H hnlein or to your authorised dealer in the original packaging including all components The manufacturer does not carry the cost for transport packaging and insurance Phone number 49 0 625793110 View our General Terms and Conditions Your authorized distributor O N Notices Type Videomatic VEO Serial Number Manufacturer Reinecker Vision GmbH Final examination Power supply 100 240 VAC 50 60 Hz Power consumption max 80 Watt Reinecker Vision GmbH International Contact sales department customer relations Sandwiesenstra e 19 DE 64665 Alsbach Hahnlein customer service Erlenweg 3 DE 64665 Alsbach Hahnlein Tel 49 62 57 93 11 0 Fax 49 62 57 93 11 8230 E Mail info reineckervision com www reineckervision com Reinecker Vision GmbH Zentrale Deutschland und Export Vertrieb Kundenberatung Sandwiesenstra e 19 64665 Alsbach Hahnlein Kundendienst Erlenweg 3 64665 Alsbach Hahnlein Tel 018 05 54 56 65 Fax 0 62 57 93 11 8008 E Mail info reineckervision de www reineckervisio
12. heir seated position see below Rotatable by 90 degrees The monitor can be moved The monitor can be rotated anti vertically up and down clockwise by 90 degrees in order to make column reading easier The image will adapt automatically to the monitors position E The monitor can be rotated The monitor can be tilted up or to either the left or to the right down 14 Alignment of xy table The xy table has two independent friction brakes for the x and y axis The friction can be continuously adjusted from minimum to maximum The yellow friction brake is used for the x axis and the black brake for the y axis x and y axis can be moved into all directions x axis is locked y axis is locked locked 15 Positioning of the remote control unit There are two remote controls available one or three buttons for Videomatic VEO Depending on which remote control you were choosing different functions will be supported The remote control unit may be attached to the VEO reading system on the right side of the xy table or underneath the monitor In addition the remote control may also be hold in the user s hand or e g placed on the table Accordingly the user has the opportunity to find the best way of operating the Videomatic VEO based on his personal ergonomic demands
13. ing and releasing the central Zoom button you can activate deactivate the automatic focus By having the autofocus activated the camera adjusts the picture sharpness automatically Contrast Brightness This button is equipped with a pull out function With the button in the pushed in position the combined adjustment of contrast and brightness is activated Low contrast low brightness turned left position high contrast high bright ness turned right position Autofocus only available for Vario camera e Line marker shadowing ci By pulling out the control button will activate the line a marking and shadowing functions Turn this button to choose the area on the screen to be marked by the line marker or to be covered by shadowing To deactivate the line marker shadowing function push the button back in again Turning the unit ON manually When the VEO is connected to the power outlet correctly it can be turned on by pushing the central Zoom button When the unit powers up lights will initially illuminate and after short time automatically return to the last used brightness level Note If the xy table is not automatically lit up please check that the mains power cable has been securely connected to the power brick If it is correctly connected then manually check the lighting settings on the remote control as lighting may have been manually deactivated see illustration below Bottom up view
14. lance White Balance Mode Auto Sharpness Settings OSD Messages OFF Special Settings Return Disabled Full Color Grayscale False Color Black Red Green Blue Yellow Magenta Cyan White User 1 User 2 Black Red Green Blue Yellow Magenta Cyan White User 1 User 2 invert foreground and background colours 25 26 Advanced Settings Color Combination Setup User color 1 Red User color 1 Green User color 1 Blue User color 2 Red User color 2 Green User color 2 Blue Advanced Settings Anti Reflection Mode Monitor Brightness Language Perform White Balance White Balance Mode Advanced Settings Sharpness Settings Real Color Sharpness False Color Sharpness adjustment range from 0 to 31 adjustment range from 0 to 31 adjustment range from 0 to 31 adjustment range from 0 to 31 adjustment range from 0 to 31 adjustment range from 0 to 31 OFF ON Auto 0 9 adjust default value adjustment range from 37 to 100 Englisch German French Norwegian execute white balance Auto One Push adjustment range from 0 to 24 adjustment range from 0 to 24 Options are only availble for the Vario camera For the camera types MD and RP the anti reflection mode is permanently activ Advanced Settings OSD Messages Special Settings ON OFF see overview Overview Advanced Settings Special Settings Zoom Extension Max Digital Zoom Advanced Settings Spe
15. n de Festnetzpreis 14 ct min Mobilfunkpreis max 42 ct min Version 1 8 Stand 10 15 Art Nr 000 02 037 Subject to change In case service is necessary please contact your autho rized distributor Bitte wenden Sie sich bei Fragen oder einem Servicefall direkt an unser Hauptwerk in Alsbach Hahnlein oder an eine unserer Niederlassungen Bei im Ausland erwor benen Produkten kontaktieren Sie im Servicefall bitte Ihren dort ansassigen Handler ReINecker
16. o the device Do not try to repair or to dismantle the system by your own This would automatically void the warranty If you need any technical assistance please get in contact with the local distributor or with Reinecker Vision GmbH Always switch OFF the system and disconnect it from the power supply before cleaning it For cleaning please use the screen clea ning cloth or any other soft lint free lightly moistened cloth Do not use alcohol containing or strong detergents ll Instructions for the reading system Videomatic VEO Delivery content e Reading system Videomatic VEO e LED monitor 19 22 24 e Remote control 1 button 3 buttons e Power adapter 12V DC 5000mA e Adapter cable country specific e User manual e Information sheet for repair cases The VEO cameras Videomatic VEO is available in combination with the following three camera types Vario camera e magnification from 1x to 100x independent of monitor size e Autofocus can be activated and deactivated by the use of button or menu see page 18 25 Focus camera MD e magnification from 4x 20x digital full colour mode e magnification from 4x 40x digital semi colour mode e Permanent Focus Technology autofocuses text pictures or objects automatically Focus camera RP e magnification from 2x 10x digital full colour mode e magnification from 2x 20x digital semi colour mode e Permanent Focus Technology autofocuses text pictures or obj
17. ously with other systems however the possibility of disturbances of the system or other systems should not be neglected For this reason it should be ensured that the system is not placed directly beside or on top of another system If the set up of this system in the proximity of medical measuring devices cannot be avoided the operator of these devices has to be informed that it is necessary to observe the performance of the system to control the conventional use of the system in the chosen set up Electronic devices are sensitive towards electric discharge and towards high frequency electromagnetic fields Attention In order to avoid high frequency disturbances the operator should respect a minimum distance of one meter to portable and mobile HF telecommunication devices The device may not be used in the patients environment Storage of the user manual The user manual is an essential part of your reading system Please keep the booklet in a safe place for future reference Product description Videomatic VEO is an opto electronic reading system which magnifies text and pictures It may be used permanently for private and professio nal appliance The text or pictures are being captured by the integrated camera and then displayed on the monitor e High Definition LED flatscreen monitors in three sizes 19 class 48cm 22 class 56cm and 24 class 61cm e ergonomic positioning of monitor in four dimensions e extremely fla
18. rol Unit 17 Turning the unit ON manually ooo it ner 19 Description of the 1 button remote control Unit 20 Automatic switch OFF function 22 2 2 2 men 21 Lighting ON dMVOFF oscar e nde Hew eae io 22 Overview Mode 22 2 onen eeenenenenenenen nennen ern nn 22 Menu selection ses siri owe yaa dete ee a a ana 23 Change the menu settings 5226 cece cee ee eee 23 Exit MENU doo 23 Explanation of the menu content 00000 een 24 Menu sellings osiris aeiio a a er 24 Warranty Informatio ss 05d ed a o id bead e a EE AR we 28 NOCES oeg parems aaa acne A a Gear ne ne ee 29 I General information Important notes on the operation of the reading system Videomatic VEO Please read them carefully prior to the operation of the reading system Notes on the electromagnetic compatibility EMC This reading system is suited for use in all set ups including the domicile that are connected directly to a public power supply for buildings with residential purposes This reading system is designed for the use in the indicated electro magnetic environment The user should ensure the use in the indicated environment This reading system operates on HF Energy exclusively for its own func tion Therefore the emitted interference of high frequency disturbances is very low and the interference with other appliances operated close by is improbable When operating the reading system simultane
19. scription o eee 7 Medical device 2 2 20 nee 7 PULPOSC rd y aa wos cei stated na era 7 Life span of product 4 545060 bh bead at bade lan 7 Safety GOVICE iai ensnnsseeedstdicexnesdetes dt e de da 8 Combination with other products 00000000 eee o 8 Precautions by alteration of the performance of the system 8 Reinstatement and installation 0 00000 cece eee eee 8 Cleaning of the system s i0 00 4 42 s 0 A bows 9 Special advice for transport and storage o oooooooooooooo 9 Disposal of the unit according to EU directive 2002 96 EEC 9 Power supply 2 2 2 2 0c eee 9 Safety INSINIELONS sure tebe eee oe ee ee ee eek ea ees 10 ll Instructions for the reading system Videomatic VEO 11 Delivery COM uo corsa Beeren 11 The VEO CaMmerasss war ac dad a aa O 11 VarlO Camera nia un ar er aa a A 11 Focus camera MD 00000 cece eens 11 Focus camera RP iison sa meaofa aa a a teenies 11 Insert replace batteries in remote Ccontrol o o o o oo o 12 Disposal of batteries 2 0 0 0 ces 12 installati n of the system Su tages nes as 8000000 28 nirt hitu ae 13 Connection of UNI 13 Alignment Of monitor 4 4 0 tea A ann x 14 Alignment of xy table os 000800 rr dee Ra a aaa x 15 Positioning of the remote control UNit cc oo lt lt 16 Description of the 3 buttons remote cont
20. t light weight energy saving and flicker free e 1080p resolution of complete system fullHD 1920 x 1080p based on 22 and 24 class monitors Medical device This reading system is classified as a Medical Device class according to 93 42 EEC annexe IX standard 12 For the distribution to countries outside the EU the respective country specific guidelines have to be regarded Purpose This opto electronic reading system is a medical device to assist with the reading and magnifying of printed text and images Visually impaired people can compensate for their loss of visual acuity by using this device Life span of product Seven years from the date of invoice ex Reinecker According to EEC the supplier of medical devices is obliged to define the life span of a pro duct Note The mentioned life span does not reflect the complete life span of the Videomatic VEO It is rather an indication on when the product might be obsolete and substitution might be recommended due to new product developments Safety advice Videomatic VEO has to be installed in closed and dry rooms only Do not plug Videomatic VEO into an electrical circuit that is also being used for any life sustaining or support systems The device may not be used in the patients environment This device should not be operated in explosion endangered environ ments This opto electronic device should only be installed in conjunction with modern electrical circuitry It
Download Pdf Manuals
Related Search