Model No. HR1-08R-21
Contents
1. IERTE KM 3077997 Model No HR1 08R 21 2007 Soleus Air International Thank you for choosing a Soleus Air personal heater This owner s manual will provide you with valuable information necessary for the proper care and maintenance of your new product Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air personal heater For your own records please attach a copy of your sales receipt to this manual Also write the store name location date purchased and serial number below Store Name Location Date Purchased Serial Number located on back of unit ooo SE IMPORTANT INSTRUCTIONS Before using your Soleus Air personal heater please read this owner s manual carefully Store this manual in a safe place for future reference 1 Read ALL instructions before using this unit 2 CAUTION Risk of Electric Shock DO NOT open or try to repair the heater yourself 3 This heater is hot when in use To avoid burns DO NOT let bare skin touch hot surfaces If provided use handles when moving this heater 4 Keep combustible materials such as furniture pillows bedding paper clothes and curtains at least 3 ft from the front of the heater and keep them away from the sides and rear DO NOT place towels or other objects on the heater 5 Extreme caution is necessary when any heater is used by or near children or the disabled or w2. HEATER SAFETY SWITCH WARNING This heater is equipped with a polarized plug one blade is wider than the other The plug is in tended to fit into a power outlet only one way with the wide blade in the wide slot This is a safety feature if you are unable to insert the plug fully into the outlet try reversing the plug If the plug still does not fit contact a qualified electrician DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG PRODUCT DIAGRAM Back Guard Front Grille Reflective Tube Sliding Column Reflection Hood Adjustable Height Button Control Panel page ASSEMBLY Remove the heater body and base from the box Remove the packaging materials and keep for future storage Slide the neck of the heater head into the column connected by the cord so that the holes in the neck align with the holes in the col umn Insert and tighten the screws with a Philips screwdriver Slide the cord through the opening in the back of the base Insert the lip near the control panel into the opening in the front of the base Push the body and base together The tip over safety switch should protrude out the bottom of the base Attach the base to the heater body by screwing on the fastening screw OPERATING INSTRUCTIONS Place the heater on a firm level surface and plug into a grounded 120V 60Hz power outlet l Press the POWER button on the heater control panel Once the power buttons i
3. be No16 AWG minimum size and rated not less than 1500VV 14 To avoid fire or shock hazard plug the unit directly into a 120 V AC electrical outlet 15 To disconnect heater turn controls to OFF then remove plug from outlet Pull firmly on the plug DO NOT unplug by pulling on the cord 16 Always unplug the unit before moving or cleaning or whenever the heater is not in use 17 Use only for intended household use as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons The use of attachments not rec ommended or sold by unauthorized dealers may cause hazards 18 Always use on a dry level surface 19 DO NOT use outdoors 20 WARNING To reduce the risk of fire or electric shock DO NOT use this unit with any solid state speed control device 21 DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit Doing so will void your warranty The inside of the unit contains no user serviceable parts Qualified personnel should perform all servicing only 22 Connect to properly grounded outlets only 23 SAVE THESE INSTRUCTIONS RE i PRODUCT INFORMATION amp SPECIFICATIONS Reflective heating technology replicates the sun s healthy rays directly warming the object or person in front of the heater As the temperature of the heated surface rises the warming effect is felt throughout the air and surrounding areas Reflective h
4. the unit and let it cool completely 2 To keep the heater clean the outer shell may be cleaned with a soft damp cloth You may use a mild detergent 1f necessary After cleaning dry the unit with a soft cloth CAUTION DO NOT let liquid enter the heater 3 DO NOT use alcohol gasoline abrasive povvders furniture polish or rough brushes to clean the heater This may cause damage or deterioration to the surface of the heater 4 DO NOT immerse the heater in vvater 5 Wait until the unit is completely dry before use STORAGE Store the heater in a cool dry location when not in use Preferably to prevent dust and dirt build up use the old packaging to repack the unit TROUBLESHOOTING If the heater will not operate please check the following before seeking repair of service 1 Check if the power cord is plugged into an electrical outlet if not plug in 2 Check if electricity to the main fuse is working 3 Check if the heater is set to ON by confirming the light on the control panel is lit If not press the POWER button to turn on the unit 4 Check if the heater is on a level surface If the tip over safety switch is not pushed in the heater will not run ioe e SE WARRANTY One Year Limited Warranty Soleus International Inc warrants the accompanying Soleus Air heater to be free of defects in material and workman ship for the applications specified in its operation instruction for a period of ONE 1 y
5. adjustment button and simultaneously pull the sliding column up to the desired height Release the height adjustment button to set To reduce the height press in the height adjustment button and simultaneously push the sliding column down Release the button to set HEATER HEAD ADJUSTMENT Grasp the reflection hood and gently tilt forward or backwards The unit will click into the different positions Notice When adjusting the heater head the heater must be turned off to ensure safety NOTE A tip over safety protection switch is installed at the bottom of the heater When the heater is placed horizontally laid down or lifted up it stops operating to ensure safety After placing the heater upright it will resume operation NOTE For safety if the heater s internal temperature rises above a certain point the heater is designed to automatically shut off To restart the heater in this situation 1 Push the power button to OFF 2 Unplug the power cord from the outlet and allow the heater to cool for at least 10 minutes 3 Plug the power cord back into the outlet Use the control panel to select the desired settings WARNING It is normal for the power cord to feel warm to the touch however a loose fit between the outlet and the plug may cause overheating of the plug If this occurs try inserting the plug into a different outlet Con tact a qualified electrician to inspect the original outlet for damage MAINTENANCE 1 Unplug
6. ear from the date of original re tail purchase in the United States If the unit exhibits a defect in normal use Soleus International Inc will at its option either repair or replace it free of charge within a reasonable time after the unit is returned during the warranty period As a condition to any warranty service obligation the consumer must present this Warranty Certificate along with a copy of the original purchase invoice THIS WARRANTY DOES NOT COVER e Damage accidental or otherwise to the unit while in the possession of a consumer not caused by a defect in material or workmanship e Damage caused by consumer misuse tampering or failure to follow the care and special handling provisions in the instructions e Damage to the finish of the case or other appearance parts caused by wear e Damage caused by repairs or alterations of the unit by anyone other than those authorized by Soleus Interna tional Inc e Freight and Insurance cost for the warranty service ALL WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO ONE YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY SOLEUS INTERNATIONAL INC DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT This warranty covers only new products purchased from our authorized dealers o
7. eaters are great for open or large rooms and actually save you energy by warm ing objects and not the entire room Reflective heating is both safe and healthy it produces no odors chemicals or fumes and doesn t stir up dust As a Safety feature the heater s exterior does not get as warm to reduce the risk of burns from anyone or any thing touching the heater while in use Remarkably efficient our heater uses less power to create the same amount of heat as traditional heaters Equipped with safety tip over switch and overheat auto off our heater is safe and reliable Voltage Rating 120 V 60Hz Power Consumption 800W on High Max 400W on Low Unit Size 15 in W x 13 4 in D x 33 5 in H Unit Weight 5 5 lbs DISCLAIMER ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER S MANUAL ARE THE PRESENTATION OF THE MANUFACTURER SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN SAFETY FEATURES Tip Over Safety Switch This heater is equipped with a tip over safety switch located underneath the base of the heater This switch must be pressed inward for the heater to function properly Some soft surfaces such as carpet may not be able to fully press in this switch For some soft surfaces a hard flat object will need to be placed underneath the heater for it to function properly PLEASE DO NOT TAPE OR GLUE THIS SWITCH BOTTOM OF THE
8. hen the heater is left operating and unattended 6 DO NOT operate any heater with a damaged cord or after the heater malfunctions has been dropped or damaged in any manner Return heater to authorized service facility for examination electrical or mechanical adjustment or repair 7 This heater is not intended for use in bathrooms laundry areas and similar indoor locations NEVER locate heater where it may fall into a bathtub or other water container To protect against electrical hazards DO NOT immerse in water or other liquids DO NOT touch the control panel or plug with a wet hand DO NOT run cord under carpeting DO NOT cover cord with throw rugs runners or similar cover ings Arrange cord away from traffic area and where it will not be tripped over 10 DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater 11 To prevent a possible fire DO NOT block air intakes or exhaust in any manner DO NOT use on soft surfaces like a bed where openings may become blocked 12 heater has hot and arcing or sparking parts inside DO NOT use in areas where gasoline paint ex plosive and or flammable liquids are used or stored Keep unit away from heated surfaces and open flames 13 Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire However if you have to use an extension cord the cord shall
9. r retailers It does not cover used sal vaged or refurbished products As some states do not allow the limitation or exclusion of incidental or consequential damages or do not allow limitation on implied warranties the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state For Technical Support and Warranty Service Please Call 888 876 5387 Or Write To Soleus International Inc www soleusair com 20035 EB Walnut Drive North CLC Of Industry CA 217869
10. s pressed in the red power light will light up To completely turn the heater off press the POWER button again Press the HEAT button on the control panel or remote control to select the desired heating mode Each press of the HEAT button will select either the HIGH or LOW heat setting Pressing the off button on the remote control will turn off the heating mode but still allow the unit to stay powered on indicated by the Red power light Press the SWING button on the control panel or remote control to select the oscillation function Once the SWING button is pressed the heater head will oscillate back and forth spreading heat throughout the room To turn off the oscillation mode press the SWING button again This heater is equipped with a half hour to 7 5 hour auto shut off timer To operate the timer mode press the TIMER button on the control panel or remote control Each press of the TIMER button will cycle be tween the times located on the control panel If more than one blue timer light is lit the operation time will equal the sum of the corresponding numbers For example after pressing the TIMER button 3 times the 0 5 hour timer light and the 1 0 hour timer light will both light up to equal a 1 5 hour time of operation To turn the unit completely off press the POWER button on the control panel The red POWER light will turn off CONTROL PANEL REMOTE CONTROL OPERATING INSTRUCTIONS HEIGHT ADJUSTMENT Press in the height
Download Pdf Manuals
Related Search