user manual
Contents
1. button to select threshold value of change from day state www eyesoniccctv com 17 9 OSD MANUAL IMAGE IMAGE GAMMA SHARPNESS 7 CONTRAST Te SATURATION 18 DNR OFF ESC EXIT GAMMA Use the SET button to go to the GAMMA sub menu SHARPNESS Use the LEFT RIGHT button to adjust the sharpness value CONTRAST Use the LEFT RIGHT button to adjust the contrast value SATURATION Use the LEFT RIGHT button to adjust the saturation level DNR Use the LEFT RIGHT button to select the digital noise reduction level OFF LOW MIDDLE HIGH GAMMA Sub Menu GAMMA Y GAMMA PRESET 2 CGAMMA PRESET 3 ESC EXIT Y GAMMA Use the LEFT RIGHT button to select preset gamma setting for luma C GAMMA Use the LEFT RIGHT button to select preset gamma setting for chroma SYSTEM SYSTEM FIRMWARE VER 3 07D 02F COMMUNICATION SDI FRAME RATE 30HZ CVBS FORMAT NTSC FACTORY RESET ESC EXIT FIRMWARE VER Information of camera s firmware version COMMUNICATION Use the SET button to go to the COMMUNICATION sub menu SDI FRAME RATE Use the LEFT RIGHT button to select the SDI output video frame rate 30HZ 25HZ CVBS FORMAT Use the LEFT RIGHT button to select the TV out video format NTSC PAL FACTORY RESET Use the SET button to action start of reset Clear all setting and initialize to factory setting www eyesoniccctv com 9 OSD MANUAL COMMUNICATION Sub C2. AMERAID Use the LEFT RIGHT button to select the RS485 ID Address Group Manu COMMUNICATION CAMERA ID BAUD RATE COMM APPLY ESC EXIT GROUP 1 9 6K 18 ID Group 1 51 GROUP 1 Window 1 ID 1 Window 2 ID 2 Main OSD Control ID 5 Window 3 ID 3 Window 4 ID 4 Camera ID Chart GROUP T GROUP2 GROUPS GROUP4 GROUP 51 Camera 1 Camera 2 Camera3 Camera 4 Camera 51 WindowiPTZ D6 ID1i ID 16 ID 251 Window2 PTZ ID2 ID7 ID 12 1D 17 ID 252 Window a PTz ID3 ID8 ID 8 ID 18 ID 253 Window 4 PTz 1D4 ID9 ID 14 ID19 ID 254 Man oen ID5 ID 10 ID 15 ID 20 ID 255 Control BAUD RATE Use the LEFT RIGHT button to select the baudrate setting for RS485 communication COMM APPLY Apply all communication setting changed at once Use the SET button to apply www eyesoniccctv com 19 9 OSD MANUAL EXIT SAVE amp EXIT SETUP EXIT WITHOUT SAVING This menu can be accessed when use the EXIT action in all menu pages SAVE amp EXIT SETUP Save all current setting and Close OSD menu These setting are loaded and applied automatically when the Camera is power on Use the SET button to action EXIT WITHOUT SAVING Close OSD menu Camera s current setting is not saved Use the SET button to action www eyesoniccctv com EYEZSONIC INNOVATIVE CUSTOMIZED CCTV SOLUTIONS www e
3. DAY amp NIGHT Day amp Night control IMAGE Apply image processing effects SYSTEM System information amp setting RESET DATA Reset camera s all feature data to default value EXIT Close OSD menu EXPOSURE EXPOUSE SHUTTER FLICKERLESS BRIGHTNESS AGC BLC WDR ESC EXIT SHUTTER Use the SET button to go to the SHUTTER sub menu FLICKERLESS Use the LEFT RIGHT button to select the flickerless control setting OFF 60Hz 50Hz BRIGHTNESS Use the LEFT RIGHT button to adjust the brightness reference level AGC Use the LEFT RIGHT button to adjust the AGC max value BLC Use the LEFT RIGHT button to select ON OFF the Back Light Compensation control WDR Use the LEFT RIGHT button to select ON OFF the Wide Dynamic Range effect control www eyesoniccctv com 14 9 OSD MANUAL SHUTTER Sub Menu SHUTTER SHUTTER SHUTTER MODE NORMAL AE SHUTTER MODE NORMAL AE AE PRIORITY NORMAL AE PRIORITY GAIN GAIN LEVEL 0DB ESC ESC EXIT EXIT SHUTTER SHUTTER SHUTTER MODE NORMAL AE SHUTTER MODE AE HOLD AE PRIORITY SHUTTER SHUTTER LEVEL 25 ESC ESC EXIT EXIT SHUTTER SHUTTER MODE NORMAL USER MODE 1 GAIN LEVEL 20 SHUTTER LEVEL 50 ESC EXIT SHUTTER MODE Use the LEFT RIGHT button to select shutter amp gain control mode NORMAL AE AE HOLD MANUAL AE PRIORITY This menu can be accessed when the SHUTTER MODE is set t
4. EYEZSONIC User Manual CONTENTS _ CAUTIONS IMPORTANT SAFETY INSTRUCTIONS FEATURES EQUIPMENT AND ACCESSORIES CAMERA COMPONENT DESCRIPTIONS INSTALLATION DIMENSIONS SPECIFICATIONS OSD MANUAL Menu Structure o coco N oO A CQ Function Description CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Use Class 2 Power Supply Only www eyesoniccctv com 1 CAUTIONS This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interfer
5. RUCTION 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 5 Do not use this apparatus near water 4 Follow all instructions 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers Stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is requir
6. UTIONS WEEE Waste Electrical amp Electronic Equipment This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a This symbol is intended to alert the user to the presence risk of electric shock important operating and maintenance servicing instructions This symbol is intended to alert the user to the presence of in the literature accompanying the appliance www eyesoniccctv com 2 IMPORTANT SAFETY INST
7. d in cover They are shown here for illustration 1 purposes www eyesoniccctv com 6 INSTALLATION MONITOR CONNECTION SD RECEIVER DISPLAY Device ml w HDSDIIN TI 0999D 5 DC12V AC24V REGULATED 15 L power SuPPLy RS485 RS485 When you install the camera please glue up the end of cable to keep it stable in order to protect the camera the humidity proble Service Video Connector TEST CABLE VIDEO IN HANDHELD MONITOR View of the most appropriate angle can be set Using the 1 axis 360 rotation function www eyesoniccctv com 7 DIMENSIONS Unit mm 123 4 www eyesoniccctv com 11 9 OSD MANUAL s Function Description MAIN MENU MAIN MENU PANORAMA MODE SELECT PANORAMA MODE SELCET Panorama Mode Select CAMERA SETTING WHITE BALANCE Basic CAMERA FUNCTION Setting EXIT PANORAMA MODE SELECT PANORAMA MODE 180 PANORAMA 360 PANORAMA 1 REGION 1 ORIGINAL 3 REGION 4PTZ EXIT 180 Panorama Use the SET button to select Fisheye Corrected Mode With 180 Panorama 360 PANORAMA Use the SET button to select Fisheye Corrected Image Mode 1 REGION Use the SET button to select 1 Region Image 1 ORIGINAL 3 PTZ Use the SET button to select 1 Windows Original Image 3 Region Window Image 4 PTZ Use the SET button to select 4 Region Image www eyeson
8. ed when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped www eyesoniccctv com 3 FEATURES s High Resolution SONY 1 3 Progressive Color CMOS Image Sensor 3 Mega Pixel Support Various Digital Video Output 1080p30 1080p25 Video Outputs Primary HD SDI BNC Test Setup TV Out Test Point adapter to BNC included NTSC PAL selectable 360 Panorama HD SDI Camera Four PTZ Views Two 180 Panorama Views One 360 Panorama View with PAN OSD menu for setup and configuration Support RS485 Communucation Protocol for Camera Configuration Remote Control PELCO D PELCO P Lens Control Fisheye Lens Focal Length 1 25 mm Power Source DC 12V AC24V e IP66 Weather Resistant www eyesoniccctv com 4 EQUIPMENT AND ACCESSORIES Camera Template Manual Screws Plastic anchors Wrench Service Video Output Test Cable When using Wall Mount Bracket www eyesoniccctv com 5 CAMERA COMPONENT DESCRIPTIONS Service Video Connector OSD Joystick CONTROL FUNCTION OSD JOYSTICK LEFT PRESS INWARD FOR MENU www eyesoniccctv com 6 INSTALLATION Template l Cover Screws 3ea are captive and will 1 normally be retaine
9. ence in which case the user will be required to correct the interference at his own expense WARNING This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Caution Any changes or modifications in construction of this devices which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment A CAUTION 1 A regulated DC12V 1A power supply is recommended for use with this camera for the best picture and the most stable operation An unregulated power supply can cause damage to the camera When an unregulated power supply is applied the product warranty will be void 2 It is recommended that the camera be used with a monitor that has a CCTV quality 75 video impedance level If your monitor is switched to high impedance then please adjust accordingly 3 Do not attempt to disassemble the camera to gain access to the internal components Refer servicing to your dealer 4 Never face the camera towards the sun or any bright or reflective light which may cause smears on the picture and possible damage to the image sensor 5 Do not remove the serial sticker for the warranty service 6 Do not expose the camera to rain or other types of liquid 7 The apparatus must be connected to a main socket outlet with a protective earth connection www eyesoniccctv com 1 CA
10. iccctv com 12 9 OSD MANUAL PTZ amp ZOOM MODE Sub Menu PTZ amp ZOOM MODE WINDOW SELECT FLIP MIRROR PAN amp TILT CONTROL POSITION INITIALIZE ESC EXIT WINDOW SELECT Use the LEFT RIGHT button to select the PTZ Control Window Control Available Window Mode Window Number 1 Region 1 4 Region 1 4 1 ORG 3 Region 2 4 180 Panorama 1 2 360 Panorama 1 FLIP Use the LEFT RIGHT button to select ON OFF the H Flip Control MIRROR Use the LEFT RIGHT button to select ON OFF the MIRROR Control PAN amp TILT CONTROL Use the SET button to go to the PAN amp TILT CONTROL sub menu only in the 1 ORG 3 Region 4 Region 1 Region Mode POSITION INITIALIZE Use the SET button to action start of Current Mode Data Reset PAN amp TILT CONTROL Sub Menu PTZ amp ZOOM CONTROL MODE 4 gt ZOOM IN ZOOM OUT ESC EXIT PAN amp TILT CONTROL Use the OSD Joystick button to action of PAN amp TILT Control ZOOM CONTROL Use the SET button to action of ZOOM IN OUT Zoom Ratio 1X 10X www eyesoniccctv com 13 9 OSD MANUAL s Function Description CAMERA SETTING CAMERA SETTING EXPOSURE WHITE BAMANCE DAY amp NIGHT IMAGE SYSTEM RESET DATA ESC EXIT EXPOSURE Adjust exposure control WHITE BALANCE Adjust white balance control
11. o NORMAL AE Use the LEFT RIGHT button to select the AE control priority setting NORMAL GAIN SHUTTER USER MODE This menu can be accessed when the SHUTTER MODE is set to MANUAL Use the LEFT RIGHT button to select the user mode 1 4 to save setting GAIN LEVEL In GAIN priority mode at NORMAL AE mode this menu can be accessed when the SHUTTER MODE is set to NORMAL AE and AE PRIORITY is set to GAIN Use the LEFT RIGHT button to select the Gain value setting GAIN LEVEL In MANUAL mode This menu can be accessed when the SHUTTER MODE is set to MANUAL Use the LEFT RIGHT button to select the Gain level setting SHUTTER LEVEL This menu can be accessed when the SHUTTER MODE is set to MANUAL Use the LEFT RIGHT button to select the Shutter level setting www eyesoniccctv com 9 OSD MANUAL WHITE BALANCE 15 WHITE BALANCE WB MODE ATW MODE ESC EXIT WB MODE SPECIFIC COLOR TARGET TEMP 3387K ESC EXIT WHITE BALANCE WHITE BALANCE WHITE BALANCE WB MODE WB MODE PUSH RGAIN BGAIN ESC ESC EXIT EXIT WB MODE Use the LEFT RIGHT button to select White balance modes ATW MANUAL SPECIFIC COLOR PUSH ATW Auto trace white balance mode MANUAL Manual white balance mode SPECIFIC COLOR Manual setting with target color temperature PUSH White Balance Push mode to Auto AWB ATW MODE This menu can be accessed when the WB MODE is set to ATW U
12. se the LEFT RIGHT button to select environment setting INDOOR OUTDOOR TARGET TEMP This menu can be accessed when the WB MODE is set to SPECIFIC COLOR Use the LEFT RIGHT button to select target color temperature R GAIN This menu can be accessed when the WB MODE is set to MANUAL Use the LEFT RIGHT button to adjust the Red Gain B GAINL This menu can be accessed when the WB MODE is set to MANUAL Use the LEFT RIGHT button to adjust the Red Gain www eyesoniccctv com 9 OSD MANUAL DAY amp NIGHT 16 DAY amp NIGHT DAY amp NIGHT AUTO DELAY TIME 3SEC DAY THRESHOLD 101 NIGHT THRESHOLD 188 ESC EXIT DAY amp NIGHT DAY amp NIGHT DAY amp NIGHT COLOR DAY amp NIGHT BW ESC ESC EXIT EXIT DAY amp NIGHT Use the LEFT RIGHT button to select Day amp Night modes AUTO COLOR BW AUTO Auto controlled by AGC level in the processor COLOR Fixed Day State Color Image BW Fixed Night State BW Image DELAY TIME This menu can be accessed when the DAY amp NIGHT is set to AUTO Use the LEFT RIGHT button to select state change delay time DAY THRESHOLD This menu can be accessed when the DAY amp NIGHT is set to AUTO Use the LEFT RIGHT state to day state button to select threshold value of change from night NIGHT This menu can be accessed when the DAY amp NIGHT is set to AUTO THRESHOLD Use the LEFT RIGHT to night state
13. yesoniccctv com
Download Pdf Manuals
Related Search