DS-9600NI-H8 Series Quick Start Guide
Contents
1. 2 Select the Shutdown button 3 Click the Yes button Logout Shutdown 0 Shutdown 19 Reboot Cancel Quick Start Guide of Network Video Recorder Changing Default Admin Password This product has default user name and password credentials for first time access You must change these default credentials to protect against unauthorized access to the product You may change the password in the startup wizard Steps 1 Follow the wizard when the device starts and enter the change admin password interface 2 Enter the default admin password 12345 for the first login and then edit the new password Wizard Previous The default password 12345 for the Admin account is for first time log in purposes only You must change this default password to better protect against security risks such as the unauthorized access by others to the product that may prevent the product from functioning properly and or lead to other undesirable consequences 3 Click Next to continue the wizard Live View Some icons are provided on screen in Live View mode to indicate different camera status These icons include Live View Icons In the live view mode there are icons at the upper right corner of the screen for each channel showing the status of the record and alarm in the channel so that you can find problems as soon as possible Alarm video loss tampering motion detection or sensor alarm sde Reco2. FCC conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement CE This product and if applicable the supplied accessories too are marked with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 201 1 65 EU 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info Trademarks and Registered Trademarks O Windows and Window
3. The camera is disconnected you can The camera is connected click the icon to get the exception information of camera Delete the IP camera Ese Advanced settings of the camera 4 To add other IP cameras 1 Click the Custom Adding button to pop up the Add IP Camera Custom interface 21 Quick Start Guide of Network Video Recorder Add IP Camera Custom IP Address Amount of Device M Protocol Managen 172 6 23 124 1 DS 2CD2 HIKVISION 8000 172 6 23 124 HIKVISION 8000 Auto Protocol Search 2 You can edit the IP address protocol management port and other information of the IP camera to be added 3 Click Add to add the camera 4 For the encoders with multiple channels only check the checkbox of Channel No in the pop up window as shown in the following figure and click OK to finish adding Channel No E Channel No v 2 vE vE One touch RAID Configuration Purpose When the RAID is enabled the disk array must be configured if you want to save recording and log files locally Through one touch configuration you can quickly create the disk array By default the array type to be created is RAID 5 Before you start As the default array type is RAID 5 at least 3 HDDs must be installed in you device Steps 1 Enable the RAID function by checking the checkbox in the disk mode configuration interface Menu gt HDD gt Advanced 2 Enter the Physical Disk Settings interface Menu gt HDD gt
4. E Continuous pe A E O e t 40 r E Motion Alarm E Alarm E Motion Detection Motion amp Alarm E VCA Copyto Save 4 Choose the day in a week to configure scheduled recording 5 Click Edit to edit record schedule Edit Schedule Mon Tue Wed Thu Fri Sat Sun aAll Day Record Type Continuous v O Customize Period Start Time End Time Record Type 1 E E e E 2 k Ek 3 k El 4 L 5 k ES 6 k a 7 L ik 8 L AE Copy to Week O Select All Mon Tue Jwed Thu fi sat Sun Copy OK Cancel 1 Configure All Day or Customize Record O Ifyou want to configure the all day recording please check the All Day checkbox O Ifyou want to record in different time sections check the Customize checkbox Set the Start Time 15 Quick Start Guide of Network Video Recorder and End Time NOTE i 1 Up to 8 segments can be configured and each segment cannot be overlapped 2 Select a Record Type The record type can be Continuous Motion Alarm Motion amp Alarm Motion Alarm and VCA 3 Check the checkbox of Select All and click Copy to copy settings of this day to the whole week You can also check any of the checkboxes before the date and click Copy 4 Click OK to save the settings and exit the Edit Schedule interface 6 Click Advanced to configure advanced record parameters You can configure parameters of enable ANR Automatic Network Replenishment Pre record time Pos
5. Pa Ua os Click the icon to enable the record and the icon turns to a And click icon to disable the record 23 Quick Start Guide of Network Video Recorder then the icon turns to a All day Recording Steps 1 On the live view window right lick the window and move the cursor to the Start Recording option and select Continuous Record or Motion Detection Record on your demand 2 And click the Yes button in the popup Attention message box to confirm the settings Then all the channels will start to record in the selected mode Playback Play back the record files of a specific channel in the live view menu Channel switch is supported e Option 1 Choose a channel under live view using the mouse and click the button in the shortcut operation menu Ap Nore Only record files recorded during the past five minutes on this channel will be played back Option 2 Steps 1 Enter the Playback menu Mouse right click a channel in live view mode and select Playback from the menu Front Panel press PLAY button to play back record files of the channel under single screen live view Under multi screen live view record files of the selected channel will be played back Nore i Pressing numerical buttons will switch playback to related channels during playback process 2 Playback management The toolbar in the bottom part of Playback interface can be used to control playing process 24 Quick Start Guide of Ne
6. Product About this Manual This Manual is subject to domestic and international copyright protection Hangzhou Hikvision Digital Technology Co Ltd Hikvision reserves all rights to this manual This manual cannot be reproduced changed translated or distributed partially or wholly by any means without the prior written permission of Hikvision Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and or its affiliates Other trademarks mentioned in this manual are the properties of their respective owners No right of license is given to use such trademarks without express permission Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW HIKVISION MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THIS MANUAL HIKVISION DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF THE MANUAL OR THE CORRECTNESS ACCURACY OR RELIABILITY OF INFORMATION CONTAINED HEREIN YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT WILL HIKVISION ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING AMONG OT
7. RAID 22 Quick Start Guide of Network Video Recorder 931 516B Normal Functional ST31000340NS 931 516B Normal Functional ST31000526SV 931 516B Normal Functional WDC WD10EVVS 6 931 516B Normal Functional WDC WD10EVVS 6 One touch C Create 3 Click One touch Configuration to enter the One touch Array Configuration interface One touch Array Configuration Cancel 4 Edit the array name in the Array Name text filed and click OK button to start configuring array NOTE If you install 4 HDDs or above for one touch configuration a hot spare disk will be set by default It is recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal 5 When the array configuration is completed click OK button in the pop up message box to finish the settings Recording Before you start Make sure that the HDD has already been installed If not please install a HDD and initialize it You may refer to the user manual for detailed information Purpose Two kinds of record types are introduced in the following section including Instant Record and All day Record And for other record types you may refer to the user manual for detailed information jm Nore After rebooting all the manual records enabled are canceled Instant Recording On the live view window of each channel there is a quick setting toolbar which shows on the bottom of the window when you click on it ELE
8. 5 x 3 5 Weight without hard disk or lt 8 Kg 17 64 lb DVD R W 11 Quick Start Guide of Network Video Recorder HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a mamo fixed bit rate 112M E NOTE Please note that supplied values for storage space used is just for reference The storage values in the chart are estimated by formulas and may have some deviation from actual value 2 Quick Start Guide of Network Video Recorder Accessing by Web Browser Logging In You can get access to the device via web browser Open web browser input the IP address of the device and then press Enter The login interface appears English v User Name q 7E Password h d Input the user name and password and click the Login button A O The default IP address is 192 0 0 64 O The default user name is admin and password is 12345 The default password 12345 for the Admin account is for first time log in purposes only You must change this default password to better protect against security risks such as the unauthorized access by others to the product that may prevent the product from functioning properly and or lead to other undesirable consequences O You may use one of the following listed web browsers Internet Explorer 6 0 Internet Explorer 7 0 Internet Explorer 8 0 Inte
9. 6 23 2011 06 23 2011 06 23 2011 06 23 2011 06 23 2011 06 23 2011 06 23 2011 06 23 201 06 23 2011 06 23 2011 06 23 2011 06 23 2011 OL MA AMAA 20 07 22 20 07 28 20 07 58 200736 20 15 02 20 11 14 20 11 20 20 12 54 20 13 02 20 13 12 20 09 40 44 11 Al Refresh a o o gt lt 0301031040926 ww First Choice for Security Professionals
10. HERS DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION SECURITY BREACHES OR LOSS OF DATA OR DOCUMENTATION IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN DAMAGES SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU Privacy Notice Surveillance laws vary by jurisdiction Check all relevant laws in your jurisdiction before using this product for surveillance purposes to ensure that your use of this product conforms Support Should you have any questions please do not hesitate to contact your local dealer Quick Start Guide of Network Video Recorder Regulatory information FCC information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
11. HIKVISION Network Video Recorder Quick Start Guide UD 6L0202B18I7A01 Quick Start Guide of Network Video Recorder TABLE OF CONTENTS NVR Installation aan Hard Disk Enstallacon diccsccesiciccccscocswonsiausseeciecas oes scccnswececesvosssonnuesaceesvadecesssedeeds Weed sede voecessevesssabevensecssvensseesveerseds 5 5 Front PANE y5iciccecsssvesctetenacecsseosseanecutssssccsesseasccgnmssdoagsensscseen AAA TARA EARL Rear Pane AAA ddctsedessadensuenensadsassdegbadsaneadersonsgebesateacersnes 9 Peripheral Connections 1 WV TET OE Alim PU A A A A 9 Win ror Aa at ti ii do 9 Usine Or Alarm Connector Sansa ad Ati dit 9 Controller Comneno A dd 10 SAA PS O ALO HDD Storage Calculation Chat dz Accessing Dy Web DEOWSER seis ir si id LoS A E A tea cuiba ars 13 LIVNI WS it A a diana 13 REO eee Un NO 15 VAY WAC AA e PO tin tase E ON 16 ELO e A te loin Gan 17 MAA vonvsaeevacscsesvacssceeversacsevecsscseosescecsvncssusevevceeeossosscacvancesdevensseuspendscocvuasscussbeusedessesscceuenteesl SR AE II O E A hanes 19 Startup add SAUS A A A AA NA 19 Chaneine Default Admin Pass WO A ia 20 Live VIEW ch So cee e a E ti ici 20 Quick Start Guide of Network Video Recorder User Manual 2015 Hangzhou Hikvision Digital Technology Co Ltd This user manual is intended for users of NVR V3 1 4 It includes instructions on how to use the Product The software embodied in the Product is governed by the user license agreement covering that
12. RX te properly a tLe pp HDD LED flashes red when data is being read from or written to HDD Ready LED turns blue when NVR is functioning properly Archive LED flashes blue when data is being backed up Backup Button Back up video files USB Ports Universal Serial Bus USB ports for additional devices such as USB mouse and USB Hard Disk Drive a NA Power Button Powers NVR L Powers NVR on off 0 Chainer Sia OA Blue nce ales recone red indicates network connecnon and ee indicates recording and network connection 6 FrontPanel Lock Panel Lock You can lock or unlock the panel by the key Quick Start Guide of Network Video Recorder Rear Panel 2 5 6 7 910 11 12 00 0 0 0 00 0 0 0 0040090 5252595959594 05050505050508080 59 959595959505050505050508080 9 050505050508020 9020 Po 0 05050 Ll LAN2 CO lees AA SADO ODO a EN C Pr Homt Hom RS 232 LAN1 No Item USB interface Description Universal Serial Bus USB ports for additional devices such as USB mouse and USB Hard Disk Drive HDD AUDIO IN RCA connector for audio input AUDIO OUT VGA HDMI1 HDMI2 RS 232 Interface RCA connector for audio output DB9 connector for VGA output Display local video output and menu HDMI HDMI video output connectors Connector for RS 232 devices eSATA Connects external SATA HDD CD DVD RW LAN Interface 2 RJ 45 10 100 1000 Mbps self adaptive Ethernet interfaces Termination Switch RS 485 terminatio
13. e the buttons on the toolbar to operate in playback mode aS A Playback Control Buttons Description lit Play Pause Stop Speed up Play by single frame Video clip 401 0 Open Close audio 6 You can drag the progress bar with the mouse to locate the exact playback point You can also input the time in the textbox oo poo and click button to locate the playback point The color of the video on the progress bar stands for the different video types Aa Command E schedule Recording E Alarm Recording OManual Recording ik Nore To play back record files of multiple cameras at the same time you may set the window division mode by clicking the E button and choose a window and then repeat the above steps 2 4 Log You can view and export the log files at any time including operation alarm exception and information of device Before you start The Log function can be realized only when the device is connected with HDD or network disk 17 Quick Start Guide of Network Video Recorder Steps 1 Click Log on the menu bar to enter the Log interface 2 Set the log search conditions to refine your search including the Major Type Minor Type Start Time and End Time 3 Click the Search button to start searching log files 4 The matched log files will be displayed on the list Up to 2000 log files can be found each time and 100 log files can be displayed on each page kH Save Log You can click the b
14. ideo Parameters l l l l Brightness contrast saturation and hue of the image can be edited Configuration Start Live View Steps 1 Inthe live view window select a playing window by clicking the mouse 2 Double click a camera from the device list to start the live view 3 You can click the 5 button on the toolbar to start the live view of all cameras on the device list Refer to the following table for the description of buttons on the live view window Select the window division mode y Open Close audio Start Stop all live view Start Stop two way Audio 14 Quick Start Guide of Network Video Recorder Capture pictures in the live view Adjust volume mode Start Stop all recording Enable Disable digital zoom Previous Next page Full screen Recording Before you start Make sure the device is connected with HDD or network disk and the HDD or network disk has been initialized for the first time to use Two recording types can be configured Manual and Scheduled The following section introduces the configuration of scheduled recording Steps 1 Click Remote Configuration gt Camera Settings gt Record Schedule to enter Record Schedule settings interface 2 Select the camera to configure the record schedule Check the checkbox of Enable Schedule to enable recording schedule Schedule Settings Channel No IP Camera1 v Record Capture Enable Record Schedule Edit Advanced
15. m output By default jumpers are connected To connect an AC load jumpers should be removed Example If you connect an AC load to the alarm output 3 of the NVR then you must remove the JP 3 Using of Alarm Connectors To connect alarm devices to the NVR 1 Disconnect pluggable block from the ALARM IN ALARM OUT terminal block 2 Unfasten stop screws from the pluggable block insert signal cables into slots and fasten stop screws Ensure signal cables are in tight Quick Start Guide of Network Video Recorder 3 Connect pluggable block back into terminal block Controller Connection 0000000000000 O50g0g0Sogoso8o80808 026262595 95629595 2985 O808080802809095202020 020202959995 9096 20 z O 0800020202020 0202020 Lo Lo Lo loS 0202020202020900 IIA O OOOO 0202020202090900 02090902020209000 j 02020209000900 2 009 0 0207020202590 2525 5209020259595 95959096 96 59 9805080809080808590909080 OCP2G GGOG9GOHOSOSOSoSoo8o808o 0405050 OROROROSO D 0505050 po OS 05050 NVR RS 485 KB T T R R GG D D OOO PTZ DVR PW es 49s PI2 00N PTZ AUX Ground DVR AUX EXPORT To connect a controller to the NVR 1 Disconnect pluggable block from the KB terminal block 2 Unfasten stop screws from the KB D D pluggable block insert signal cables into slots and fasten stop screws Ensure signal cables are in tight 3 Connect Ta on controller to D on terminal block and Tb on controller to D on termi
16. n switch Up position is not terminated Down position is terminated with 120Q resistance RS 485 Interface Connector for RS 485 devices T and T pins connect to R and R pins of PTZ receiver respectively D D pin connects to Ta Tb pin of controller For cascading devices Controller Port the first NVR s D D pin should be connected with the D D pin of the next NVR 11 Connector for alarm input Connector for alarm output Ground needs to be connected when NVR starts up No EJ 6 DE 8 Quick Start Guide of Network Video Recorder Peripheral Connections Wiring of Alarm Input The alarm input is an open closed relay To connect the alarm input to the device use the following diagram NOTE If the alarm input is not an open close relay please connect an external relay between the alarm input and the device GND KB ALARM OUT 16263646 Wiring of Alarm Output To connect to an alarm output AC or DC load use the following diagram DC Load JQC 3FG Relay 10A 250VAC Relay alarm output DC Load Connection Diagram AC Load Connection Diagram For DC load the jumpers can be used within the limit of 12V 1A safely To connect an AC load jumpers should be left open you must remove the jumper on the motherboard in the NVR Use an external relay for safety as shown in the figure above There are 4 jumpers JP1 JP2 JP3 and JP4 on the motherboard each corresponding with one alar
17. nal block Fasten stop screws 4 Connect pluggable block back into terminal block aH l Note Make sure both the controller and NVR are grounded 10 Quick Start Guide of Network Video Recorder Specifications Video Audio IP video input 16 ch 32 ch 64 ch Incoming bandwidth 192 Mbps 384Mbps 768Mbps Outgoing bandwidth 768Mbps Network Network Protocol HUNT ONVIF Version 2 4 PANASONIC PELCO PSIA SAMSUNG 6 SANYO SONY VIVOTEK ZAVIO HIKVISION ACTi ARECONT AXIS BOSCH BRICKCOM CANON 2 ch resolution HDMI1 HDMI output 1920 x 1080P 60Hz 1600 x 1200 60Hz 1280 x 1024 60Hz 1280 x 720 60Hz 1024 x 768 60Hz HDMI2 3840x2160 30Hz 1920 x 1080P 60Hz 1600 x 1200 60Hz 1280 x 1024 60Hz 1280 x 720 60Hz 1024 x 768 60Hz 1 ch resolution 1920 x 1080P 60Hz 1600 x 1200 60Hz 1280 x 1024 60Hz 1280 x 720 60Hz 1024 x 768 60Hz Audio output 1 ch RCA Linear 1kQ Decoding format H 264 MPEG4 M JPEG Decoding Recording resolution 8MP SMP 3MP 1080p UXGA 720p V GA 4CIF DCIF 2CIF CIF QCIF O O A E Disk array CT 8 interface USB interface 2 x USB 2 0 on front panel and 2 x USB 3 0 on rear panel Alarm in out 16 4 Power supply 100 240 VAC 50 60 Hz Consumption without hard disk or lt 100 W DVD R W Others Working temperature 10 C 55 C 14 F 131 F Working humidity 10 90 19 inch rack mounted 2U chassis Dimensions W x D x H 445 x 470 x90 mm 17 5 x18
18. rd manual record continuous record motion detection or alarm triggered record Alarm amp Record Event Exception event and exception information appears at the lower left corner of the screen Adding IP Cameras You should add and configure the online IP cameras to enable the live view and recording function Steps 1 Right click the mouse when you in the live view mode to show the right click menu 20 Quick Start Guide of Network Video Recorder Menu Single Screen Multi screen Previous Screen Next Screen Start Auto switch Start Recording Add IP Camera Playback Output Mode Aux Monitor 2 Select Add IP Camera in the pop up menu to enter the IP Camera Management interface IP Camera Management MCam Add De Status IP Camera A Edit Up Camera Name Protocol Device Mo MD1 172 6 23 123 E 1 Camera 01 HIKVISION DS 2CD40 172 6 23 2 LA OEI HIKVISION E gt Refresh Upgrade Delete One touch A Custom Addi Net Receive Idle Bandwidth 37Mbps 3 The online cameras with same network segment will be displayed in the camera list Click the O button to add the camera Or you can click the One couch Adding button to add all the online IP cameras a Nore The added camera is marked in white while the camera has not been added is marked in yellow Explanation of the icons Explanation Explanation ab Edit basic parameters of the camera Add the detected IP camera
19. rnet Explorer 9 0 Internet Explorer 10 0 Apple Safari Mozilla Firefox and Google Chrome O The supported resolutions include 1024 768 and above When you log in for the first time the system will remind you to install the Plug in control After the installation you can configure and manage the device remotely Live View The live view interface appears by default when you log in the device 13 Quick Start Guide of Network Video Recorder Configuration UM Embedded Net DVR 2 6 6 IPCamera 01 xB PCamera 02 4 1 2d E PCamera 03 All y a t 2s El IPCamera 04 En on a pl o O nm 24 E P Camera 05 o PCamera 06 o Camera 01 5 Camera 01 Preset Preset Preset Preset9 Presett0 Presett1 Presett2 Preset13 Preseti4 Presetts Presett6 e 1 BL of SS r lattea Video parameters 5 Interface Introduction Displays the list of channels and the playing and recording status of each channel 1 Channel List due The stream type can be switched by clicking the icon before the channel name 2 stands for main stream and for sub stream Live View Window Displays the image of channel and multi window division is supported Play Control Bar Play control operations are supported Pan tilt zoom operations are supported as well as preset and patrol editing and calling PTZ Control Nore PTZ function can only be realized if the connected camera supports PTZ control V
20. s mark are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries O HDMI HDMI mark and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC O The products contained in this manual are authorized by HDMI Licensing LLC with the use right of the HDMI technology HOM HIGH DEFINITION MULTIMEDIA INTERFACE O VGA is the trademark of IBM UPnP is a certification mark of the UPnP Implementers Corporation O Other names of companies and product contained in this manual may be trademarks or registered trademarks of their respective owners Quick Start Guide of Network Video Recorder Preventive and Cautionary Tips Before connecting and operating your device please be advised of the following tips Ensure unit is installed in a well ventilated dust free environment Unit is designed for indoor use only Keep all liquids away from the device Ensure environmental conditions meet factory specifications Ensure unit is properly secured to a rack or shelf Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit Use the device in conjunction with an UPS if possible Power down the unit before connecting and disconnecting accessories and peripherals A factory recommended HDD should be used for this device Improper use or replacement of the battery may result in hazard of e
21. t record time Stream Type Record Audio and Expired Time Advanced C Enable ANR cannot copy Pre record 5s Postrecord 5s Stream Type Main Stream Record Audio Yes Expired Time 0 7 Click Save to validate the above settings 8 Optional You can click the Copy to button to copy the same setting to other cameras Playback Live View ED Embedded Net OVR 1 6 Camera 01 Camera 02 Camera 03 Camera 04 Camera 05 Camera 06 Camera 07 Camera 08 Camera 09 6 Camera 10 Camera 11 Camera 12 amp Camera 13 Camera 14 Camera 15 Camera 16 Camera 01 amp Camera 01 Playback Log Configuration Interface Introduction Channel No 1 5 Status 1X Speed 4 Dec 2013 gt Sua Mon Tue Wed Tho Fri Sat 2 9 0 6 u y y 6 15 16 17 18 19 N 2 s MB 21 2 Q Search E Command E Schedule Alarm Manual Quick Start Guide of Network Video Recorder Channel List Displays the list of channels and the playing status of each channel Playback Window Displays the image of channel FE Tie Line Diy te ine aan ie eo mac vi nl ETT ETT TN Start Playback Steps 1 Click Playback on the menu bar to enter playback interface Click the camera from the device list for playback Select the date from the calendar and click Search Click the MA button to play the searched video file on the current date Us
22. than its diameter Connect the alarm cable Allow at least 2cm 0 75 inch of space between racks mounted devices Ensure the NVR is grounded Environmental temperature should be within the range of 10 C 55 C 14 F 131 F Environmental humidity should be within the range of 10 90 Hard Disk Installation Before you start LX AX UU FW N Disconnect the power from the NVR before installing a hard disk drive HDD A factory recommended HDD should be used for this installation Tools Required Screwdriver Steps 1 Fasten the hard disk mounting handle to the hard disk with screws 2 Insert the key and turn in clockwise direction to open the panel lock 3 Press the buttons on the panel of two sides and open the front panel Quick Start Guide of Network Video Recorder 4 Insert the hard disk along the slot until it is placed into position 5 Repeat the above steps to install other hard disks onto the NVR After having finished the installation of all hard disks close the front panel and lock 1t with the key again Quick Start Guide of Network Video Recorder Front Panel HIKVISION Name Description E aes Turning red indicates power is connected but the system isn t Power running turning blue indicates power is connected and the system is running Alarm LED turns red when a sensor alarm is detected 1 Status TX RX LED flashes blue when network connection is functioning LED TX
23. twork Video Recorder 33 X Max Ca Min Ca MiPCamera 01 MiPCamera 02 MiPCamera 03 MiPCamera 04 MiPCamera 05 iPCamera 06 a MCamera 01 Just check the channel or channels 1f you want to switch playback to another channel or execute simultaneous playback of multiple channels Backup Recorded files can be backed up to various devices such as USB flash drives USB HDDs or a DVD writer Steps 1 Enter Video Export interface Choose the channel s you want to back up and click on the Quick Export button MIP Camera M01 y TDS KBD D4 y TS KBD UD MDS 09 09 2013 16 02 02 12 25 2013 17 25 47 All All 12 25 2013 00 00 00 12 25 2013 23 59 59 2 Enter Export interface choose backup device and click Export button to start exporting USB1 1 Y Refresh 2 004MB New Folder Format Export Cancel 3 Check backup result Choose the record file in Export interface and click button to check it 25 Quick Start Guide of Network Video Recorder USB1 1 Al Export record files to me El Welcome to use backup E chO3_20110623000000 E ch03_20110623042932 E ch03_20110623091403 er 03 20110623092322 a ch03_20110623113325 E cn03_20110623132800 E ch03_20110623134743 B player exe mwe Mor rl as bee bes T rs lt Export Folder Folder OKB File OKB File 26 7MB File 280MB File 4 423KB File 127MB File 110MB File 18 36 7KB File 37 305KB File 608KB File Usd Fito New Folder 26 0
24. utton to save the searched log files to local directory 18 Quick Start Guide of Network Video Recorder Menu Operation Menu Structure The menu structure DS 9600NI H8 series NVR is shown below Menu Playback Export Manual HDD Record Camera Configuration Normal Record General Schedule Camera General Event a Advanced Parameters OSD Network apture s Picture Alarm RAID Advanced Image Alarm Holiday PTZ RS 232 Motion Live View Privacy Eita Mask xcep ions hens User Tampering Video Loss Hot Spare VCA Startup and Shutdown Maintenance System Info Log Information Import Export Upgrade Default Net Detect Proper startup and shutdown procedures are crucial to expanding the life of the NVR To start your NVR Shutdown Logout Shutdown Reboot 1 Check the power supply is plugged into an electrical outlet It is HIGHLY recommended that an Uninterruptible Power Supply UPS be used in conjunction with the device The Power button on the front panel should be red indicating the device gets the power supply 2 Press the POWER button on the front panel The Power LED should turn blue The unit will begin to start After the device starting up the wizard will guide you through the initial settings including modifying password date and time settings network settings HDD initializing and recording To shut down the NVR 1 Enter the Shutdown menu Menu gt Shutdown
25. xplosion Replace with the same or equivalent type only Dispose of used batteries according to the instructions provided by the battery manufacturer CHANGE THE DEFAULT PASSWORD The default password 12345 for the Admin account is for first time log in purposes only You must change this default password to better protect against security risks such as the unauthorized access by others to the product that may prevent the product from functioning properly and or lead to other undesirable consequences For your privacy we strongly recommend changing the password to something of your own choosing using a minimum of 8 characters including upper case letters lower case letters numbers and special characters in order to increase the security of your product Proper configuration of all passwords and other security settings is the responsibility of the installer and or end user Quick Start Guide of Network Video Recorder Thank you for purchasing our product If there is any question or request please do not hesitate to contact dealer This manual is applicable to the models listed in the following table DS 9600NI H8 DS 9616NI H8 Network Video Recorder DS 9632NI H8 DS 9664NI H8 NVR Installation During the installation of the NVR Use brackets for rack mounting Ensure there is ample room for audio and video cables When routing cables ensure that the bend radius of the cables are no less than five times
Download Pdf Manuals
Related Search