SB-210 BT BLUETOOTH® SOUNDBAR WITH USB & SD
Contents
1. this device has been manufactured according to the RoHS Directive ErP Il this device complies with the ErP Directive WEEE this device complies with the 2002 96 EC Directive GB 13 Do not distribute copyrighted material Do not distribute copyrighted material without the permission of the owners By doing this you risk violation of copyright laws The manufacturer is not liable for any legal issues caused by illegal use of copyrighted material by the user Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are solely provided for your personal and non commercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell or create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS 15 LENCO DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED NEITHER EXPRESSLY NOR IMPLIED FOR ANY PURPOSE LENCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FO2. from the actual product Lenco is not liable for any printing errors in this user manual What s in the box The content of the box is assembled with the utmost care In the unfortunate case that anything is missing please contact your dealer Content of the box Soundbar Remote control User Manual RCA Cable Audio Cable Wall mount brackets hm a a a aw a GB 3 Exploring the device GNO Or wh s Volume button Volume button Standby button Source button PAIR PLAY PAUSE Button SD MMC Card slot USB Port LCD Display GB 4 11 12 13 14 15 Bluetooth indicator Remote control sensor Hanging holes FM antenna AC Cord AUX in Jack Line in Jack Sleep button Source button Clock button Timer button Numeric buttons Voice button EQ button Bass buttons Treble buttons 10 Mute button 11 Standby button 12 TUNING SKIP SEARCH BACKWARD Button 13 TUNING SKIP SEARCH FORWARD Button 14 MEM Button 15 PAIR PLAY PAUSE Button 16 MUSIC Button 17 MOVIE Button 18 VOL Buttons 19 CH Buttons CHONAARWON gt Getting started Where to install Never place the device in direct sunlight Place it on a sturdy platform of which the surface should be flat and steady so the product can t fall or hit by any objects Make sure the product is placed in such a manner that nothing can fall on top of it as
3. 5 POWER SUPPLY Plug AC plug into the outlet socket for connecting the main power NOTE If not any audio signal inputs to the unit in about 60 minutes the unit will enter to standby mode automatically except at FM mode SLEEP TIMER SETTING You can set the sleep timer at power on modes as following instructions During playback press the SLEEP button on the remote control repeatedly to cycle through the sleep time options Release the SLEEP button when your desired sleep time shows on the screen Once the sleep time is expired the unit will be switched off During playback press SLEEP button once to check the remaining sleep time HOW TO SET TIME At the standby mode press and hold the CLOCK button on the remote until Hour flashes on the screen use the TUNING SKIP SEARCH buttons on the remote to adjust the hour and confirm your adjustment by pressing the CLOCK button on the remote Minute starts blinking on the screen press the GB 6 TUNING SKIP SEARCH buttons on the remote to set the minute accordingly press the CLOCK button on the remote again to confirm your setting During playback press and hold the CLOCK button on the remote to check the current time Note The time only could be set at standby mode TIMER SETTING 1 At standby mode press and hold the TIMER button on the remote The hour on the display will begin blinking on the screen with the flashing timer icon T 2 Press the TUNING SKIP SEARCH butto
4. IO IN eeigen 9 LINE 1 10 Maintenance of the device 10 Troubleshooting Specifications eh i a ene 11 Safety inStructlons 12 Declaration of Conformity isson a rE a i 13 Do not distribute copyrighted 14 Sl 14 Servic amp and 8 es corre caps hese dsc EAS 15 E 15 16 GB 2 Dear customer Thank you for choosing for Lenco At Lenco we are convinced that everyone should enjoy life as much as possible Our products are meant to support improve and create joyful moments for everyone For this reason we offer user friendly high quality and well designed consumer electronics for an excellent price This user manual is designed to help you with the features of this device Note This user manual was written during the development of the product based on the factory settings If the product would need improvement priority is given to the product and therefore in these cases the quick start guide user manual illustrations in the user manual and or packaging may differ
5. Lenco SB 210 BT BLUETOOTH SOUNDBAR WITH USB amp SD CARDREADER ns User manual Please read and follow these instructions before using your unit www lenco com 20121303 v1 0 Table of content What Siin the 3 4 Getting vis ena anaemia nia 5 Where to install 5 First use of the remote Replacing the battery of the remote control POWER SUPPLY anarai SLEEP TIMER SETTING a HOW TO SET TIME tise ke ee a TIMER SETTING 7 USB amp SD MMC CARD 7 BLUETOOTH OPERATING 2 7 RE CONNECT TO THE BLUETOOTH AUDIO SOURCE 1 8 8 FEM RADIO 8 TUNING THE FM 8 STORING YOUR FAVORITE RADIO 9 MUTE THE UNI Tiss aE aa RENTE 9 VOLUME LEVEL TREBLE BASS 9 PROFESSIONAL AUDIO 9 CONNECTING WITH OTHER 9 AUD
6. R A PARTICULAR PURPOSE LENCO DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL LENCO BE LIABLE NEITHER IN CONTRACT NOR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be terminated or interrupted at any time and Lenco makes no representation or warranty that any content or service will remain available for any period Content and services are transmitted by third parties by means of networks and transmission facilities over which Lenco has no control Without limiting the generality of this disclaimer Lenco expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device Lenco is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers GB 14 Service and support For information www lenco com For support http lencosupport zendesk com Lenc
7. cycle through the EQ options when your desired EQ effect shows on the screen release the button FM RADIO TUNING THE FM RADIO 1 Power on the unit switch to FM RADIO mode by pressing SOURCE button repeatedly 2 Press the TUNING SKIP SEARCH buttons on the remote to fine tune radio station Press and hold the TUNING SKIP SEARCH buttons on the remote to auto search radio station forward or backward respectively When an available station will be found the unit will broadcast it immediately and the searching will be stopped During auto searching press the TUNING SKIP SEARCH buttons on the remote to stop the searching 3 At radio mode it is possible to access the frequency via numeric buttons on the remote control For example press buttons 8 9 and 8 to get to 89 8 MHz GB 8 STORING YOUR FAVORITE RADIO STATION 1 During playback press the MEM button on the remote for storing the current station until a memory cell number flashes on the screen 2 Use the CH or CH buttons on the remote to select the corresponding memory cell for storing the station 3 Confirm your selection by pressing the MEM button on the remote 4 During radio playback press the CH or CH buttons on the remote repeatedly to recall the stored stations MUTE THE UNIT During playback press the MUTE button on the remote to switch off the audio Press the button again to resume the audio VOLUME LEVEL TREBLE BASS ADJUSTMENT Press the VOLUME but
8. ible support 2 Dimensions 941 8 L x 60 5 W x 110 5 H mm Operating Humidity Range 10 to 75 GB 11 Safety instructions Explanation of symbols T This symbol indicates that there are important operating maintenance instructions in the user manual accompanying the device This symbol indicates that dangerous voltage is present within this device constituting a risk of electronic shock or personal injury CAREFULLY READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USE WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN THIS DEVICE WARNING DO NOT REMOVE ANY SCREWS OR OTHER COMPONENTS OF THE DEVICE TO PREVENT THE RISK OF ELECTRIC SHOCK Install and use the device only as described in the user manual This device must be used in combination with a power supply as specified in the specification table If you are not sure of the type of power supply used in your home consult your power company Do not use loose or damaged cords and or plugs This device has a Class II construction Devices with a Class 11 construction can be connected to an unearthed power outlet The power outlet must be located close the device and must be easily accessible Make sure that power outlets or extension cables are not over overloaded Overloading can cause short circuits or fire Always pull the plug when removing it from the power outlet Do not pull the power cord This may cause a short circuit If you notice sm
9. irement for disposal of electrical equipment or batteries In so doing you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste Waste Electrical and Electronic Equipment Directive When you see a crossed out wheeled waste container on the product It means that the product falls under the EU directive 2002 96 EC GB 15 Trademarks Bluetooth is a trademark of Special Interest Group Lenco is a trademark of STL Group B V All application copyright their respective owners 2013 STL Group B V all rights reserved Lenco is a trademark of STL Group B V STL Group B V is not responsible for any printing errors in this manual Products of other manufacturers are only mentioned for information This does not mean that these products are recommended by STL Group B V STL Group B V accepts no liability for the reliability or compatibility of these products GB 16
10. lution Radio sound 1 The station is not tuned 1 Fine tune the station distorted in 2 Unwind the wire antenna 2 There is a poor signal in for best reception the area No radio 1 The unit is not at tuner 1 Press SOURCE button sound mode repeatedly until switching 2 The volume has been to tuner muted or is on the 2 Adjust the volume level or minimum setting press the MUTE button to resume audio No Sound at 1 The unit is not 1 Follow the manual to Bluetooth connected with the connect the audio source mode audio source device device to the unit 2 The unit is placed out of 2 Relocate the unit within the range Bluetooth operating 3 The volume has been range muted or is on the 3 Adjust the volume level or minimum setting press the MUTE button to resume audio Sound is Sound source is distorted If the original sound source distorted at of the external device is poor Bluetooth A quality or with distortion and UX Line in noise it will be easily modes noticed with high power speakers Try a different audio source No sound at 1 The unit is not 1 Follow the manual to AUX Line connected the external reconnect the audio modes appliance properly appliance to the unit 2 Adjust the volume level or press MUTE button to resume audio Specifications Power source AC 100 240V 50Hz 60Hz Power consumption 50W Battery of remote control CR2025 x 1 Receiving bands FM 87 5 108 MHz Bluetooth compat
11. ns on the remote to adjust the hour 3 Press the TIMER button to confirm The minute on the display will begin blinking 4 Press the TUNING SKIP SEARCH buttons on the remote to adjust the minute 5 Press the TIMER button on the remote to confirm your setting 6 After the set time is reached the unit will power on to the radio automatically 7 The timer function can be deactivated or activated by short pressing the TIMER button on the remote USB amp SD MMC CARD PLAYBACK 1 Power on the unit insert an USB or a SD MMC card into the unit 2 Press SOURCE button repeatedly to switch to USB or card mode The playback will start automatically 3 Press the TUNING SKIP SEARCH FORWARD button on the remote to skip to the next track press and hold to search through the track forward 4 Press the TUNING SKIP SEARCH BACKWARD button on the remote to skip to the previous track press and hold to search through the track backward 5 Use the numeric buttons to enter the track number to select your desired track for playback BLUETOOTH OPERATING This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device 1 Power on the unit switch to BLUETOOTH mode by pressing SOURCE button repeatedly 2 LED indicator rapid blinking while it is pairing 3 Enable the Bluetooth of the Bluetooth audio source device 4 Pair and connect to SB 210 BT the unit on the audio source device If prompted for passcode e
12. nter 0000 5 Pairing successful LED indicator blue ready to stream music 6 During playback press PLAY PAUSE button to cease or resume the playback GB 7 7 During playback press TUNING SKIP SEARCH FORWARD button to skip to the next track press TUNING SKIP SEARCH BACKWARD button twice to skip to the previous track 8 During playback press and hold TUNING SKIP SEARCH buttons to search through the current track forward or backward Note e Pairing mode is canceled about 1 5 minutes e The above are generic steps to pair a BLUETOOTH device for more specific instructions on BLUETOOTH connectivity for your device please consult your manufacturer s manual Once the unit enters to the BLUETOOTH mode it will connect to the last paired external BLUETOOTH device automatically RE CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE If the device is already paired with the SB 210 BT but became unconnected even with both Bluetooth devices turned on You can re connect them by following steps 1 Press and hold the PAIR button on the unit or on the remote to re link the audio source device The Bluetooth indicator will blink for about 1 5 minutes for connecting 2 Select SB 210 BT on the audio source device for connecting Bluetooth indicator will turn to solid blue if the SB 210 BT and the device have been re connected successfully EQ EFFECTS During playback press EQ button on the remote repeatedly to
13. o helpdesk Germany 0900 1520530 Local charges The Netherlands 0900 23553626 Local charges 1ct p min Belgium 02 6200115 Local charges France 03 81484280 Local charges The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM When contacting Lenco you will always be asked for the model and serial number of your product The serial number can be found on the back of the device Please write down the serial number below Model SB 210 BT Serial number Lenco offers service and warranty in accordance to European law which means that in case of repairs both during and after the warranty period you should contact your local dealer Important note If this unit is opened or accessed by a non official service center in any way the warranty expires This device is not suitable for professional use In case of professional use all warranty obligations of the manufacturer will be voided Lenco offers service and warranty in accordance to European law which means that in case of repair both during and after the warranty period you should contact your local dealer Please note It is not possible to send repairs to Lenco directly End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe To ensure the correct waste treatment of the product and battery please dispose them in accordance to any applicable local laws of requ
14. oke an excessive build up of heat or any other unexpected phenomena you should disconnect the plug from the power outlet immediately Disconnect the plug from the power outlet during lightning storms Disconnect the plug from the outlet when the device will not be used for a long time Do not step on the power and don t pinch the power cord Do not place heavy objects on the power cord or any other cables as this may damage the cord or cables Keep the device away from children When they play with the power cord they can seriously injure themselves Keep the power cable away from rodents and rabbits Make sure all ventilation openings are clear at all times do not cover or block them GB 12 Leave 5 cm 2 free space around the device Always make sure the device is well ventilated Keep the device away from heat sources such as radiators heaters stoves candles and other heat generating products Avoid using the device near strong magnetic fields Do not use this device when condensation may occur Do not use this device near water or other liquids Do not use this device in a damp room Do not use this device near a swimming pool Electrostatic interference may interfere with the normal use of this device If this occurs reset the device and restart it according to the instructions in the user manual The display is made of plastic and might break when it s damaged Beware of shar
15. p plastic splinters when the screen breaks to avoid injury Should the unit become wet immediately remove the plug from the power outlet and let the appliance fry for 72 hours before trying to use it again Remove the batteries from the device and or remote control if they will not be used for a long time This device and the supplied accessories contain sensitive components Never drop them put them in a microwave burn them or paint them Do not bite or suck on the device and or supplied accessories Do not insert the device or the supplied accessories in your ears mouth or other body orifices This device and or accessories contain small parts that may lead to a choking hazard Therefore keep it away from children When connecting the device if a connector does not seem to fit do not force it Be careful when using this device when participating in traffic the sound might distract your attention Lenco recommends using A brand batteries WARNING Prolonged exposure to loud sounds from personal music AN players may lead to temporary or permanent hearing loss device The use of a USB extension cable can cause malfunction or WARNING Do not use a USB extension cable to connect a USB loss of data Declaration of Conformity Products with a CE marking comply with the EMC directive 2004 108 EC and the Low Voltage Directive 2006 95 issued by the European Commission of the European Community RoHS
16. pressure will damage or break the product Prevent insertion of objects into the ventilation slots or openings in the cabinet at all time Always read the safety instructions carefully before use Lenco is not responsible for damages and or consequential damage caused by improper use or malfunction of the device Lenco is not responsible for the loss of data during data transfer or or the loss of data Do not use a USB extension cable to connect a USB device The use of a USB extension cable can cause malfunction or loss of data Lenco recommends using A brand batteries GB 5 First use of the remote control Before the first use of the remote control the plastic tab should be pulled out of the remote A Lenco recommends using A brand batteries Bright ambient light may interfere with operation 4 of the remote control Remove the batteries from the remote control when it is not being used for a long time Replacing the battery of the remote control When the remote control stops working or stops working properly the battery should be replaced Replace the battery as follows 1 Press the catch at arrow 1 in the direction of arrow 2 and hold it 2 Pull the battery tray out by pulling it in the direction of arrow 2 3 Replace the battery with a new one and slide the battery tray back in the remote control Note that the side of the battery is facing up The model number of the battery is CR202
17. tons or TREBLE buttons or BASS buttons on the remote to adjust the volume output level or treble effect or bass effect PROFESSIONAL AUDIO MODES During playback press the VOICE MUSIC or MOVIE buttons on the remote to switch among voice music and movie audio modes for getting high sound quality The audio modes can reveal the characters and details of the sound of the voice music and movie and make you liked being there CONNECTING WITH OTHER DEVICES rea e CI Co AUDIO IN 1 Connect the Aux in jacks on the unit to audio source for example DVD player with an RCA cable 2 Power on the unit and the audio device 3 Press the SOURCE button repeatedly to switch to AUX mode 4 Use the native controls on the connected audio device to begin playing music through the connected unit GB 9 LINE IN Follow steps to connect the unit to another audio device 1 Connect the device into the unit s LINE IN jack with the LINE OUT cable 2 Press STANDBY button to turn the unit on 3 Press SOURCE button repeatedly to switch the unit to Line mode 4 Power on the device and begin play Maintenance of the device Clean the device only with a soft damp cloth Do not use detergents GB 10 Troubleshooting 2 The volume has been muted or is on the minimum setting Symptom Possible Cause So
Download Pdf Manuals
Related Search