Home

razberiTM - Razberi Technologies

1. b What information do need to create a profile To create a profile a user needs a user name password server type i e DVR NVR server IP address domain name connection type i e local remote and communication port settings See Creating a Profile for more information c How do l edit profiles Edit profiles by selecting New Edit Profile from the dropdown option within the Login screen See Creating a Profile for more information razberi Technologies 34 d How I create a profile multiple sites Once a profile exists a user can edit that profile to include multiple sites Additional sites are for other servers associated with the profile being edited See Sites for more information How do manage profiles for multiple sites The system administrator manages access to individual servers through user definitions as defined within the User Management section found within the Administration window of any particular server 3 Video Search and Playback a How do retrieve video Video is retrieved by selecting the Search icon found at the upper left corner of the Tool Bar within the Live View Screen b How do I download archive and export video Once a user locates a video clip the user can archive the clip by selecting the Export icon found within the Slider window c How do perform an Event Search Within the Search window the user has many specifications to use in order to narrow the s
2. 000 razberi 999 ec technologies razberi MP Series User Manual Safety Warning Retain and follow all safety and operating instructions Observe warnings on products Unplug the product from the electrical outlet and discontinue use under the following conditions The power cord or plug is damaged the product is exposed to liquid the product is dropped or an object falls on the product the product is noticeably overheated Read this manual carefully before installing the unit Please read this manual first for correct installation and operation Never install the device on a ceiling that cannot hold its weight The product may fall down and cause damages Never install the product near electric or magnetic fields Install the device away from TVs radio transmitters magnets electric motors transformers and audio speakers since the magnetic fields distort the video image Never install or use the product in areas exposed to water oil or gas The water oil or gas may result in operation failure electric shock or fire Do not use this unit near water e g near a bath tub wash bowl kitchen sink laundry tub wet basement swimming pool unprotected outdoor installation or any area which 15 classified as a wet location Never face the unit toward the sun Direct sunlight may cause fatal damage to sensors and internal circuits Touching a wet power cord with hands or touching the power cord with wet hands may result in
3. PVO200 18 3 Inthe Camera List select the cameras to add to the Camera Tour List and use the arrows in the middle to navigate the order of the camera views 4 In the Dwell Time field select the number of seconds for each camera view to last 5 When finished designing the tour click OK The tour displays in the Live View window If a camera is offline then the tour skips that video and goes to the next available online camera in the sequence To edit Camera Tours right click on the Tour folder in the Camera Tree and select Edit Camera Tour 3 7 Live Video Display The connected cameras display in the Camera Tree as online cameras Up to 16 videos can be viewed on one screen The video display area appears below the Tool Bar and to the right of the Camera Tree The system offers a few options for viewing live video in the display areas 1 Click and drag the camera name from the Camera Tree to an available open area 2 Double click on a camera name from the Camera Tree and the video will display in an open area 3 Right click on the camera name from the Camera Tree select View Camera from the list of available options and the live video from that camera plays in an open area razberi Technologies Each video display has options in the bottom right corner Indicates recording video from camera X Closes the video display from that camera Shows PTZ functionality if the camera is a PTZ NOTE The PTZ o
4. can also be installed into a network where a DHCP server does not exist 4 9 6 If there is no network connection or there are no DHCP servers on the dedicated network the razberi will default to a specific address after a few minutes a default IP address that the razberi will use is 192 168 9 1 b This address may be used to make an initial connection i In order to connect to the razberi the client machine must be on the same subnet Example 192 168 9 XXX Change the network settings on the client PC by accessing the computer s Network Settings Network Connections or Network Management Right click the Local Area Connection and select Properties See figure 4 Figure 4 Network Connections Fie View Favorites Tools Advanced Help 4 y 2 3 Search c Folders Es Address Network Connections m Be Al Name Type Status network Tasks LAN or High Speed Internet Create E Local Area Connection 3 LAM High Speed Inter Connected coon Change Windows ab 1394 Connection 2 Disable High Speed inter Connected Firewall settings Wireless Network Conn Status High Speed Inter Not connected Disable this network Repar device ev vine pum Q Repair this connection Bridge Connections j Rename this connection Create Shortout View status of this connection Rename Properties 4 hange settings of thi
5. 1 create a Group right click the Views folder inthe Camera Tree See figure 15 2 Select Add Group from the list of options 3 Inthe Add View Group dialog box enter the Group Name and a Description of the views and layouts included in the Group After creating the Group a new folder with the Group name appears in the Camera Tree Figure 15 aia C Came Add Group razberi Technologies 3 6 4 Tours In the Camera Tree use the Camera Tour folder to add a sequence of live videos from multiple cameras Select cameras to add to a tour and view a cycle of live video from the added cameras in the Live View window Set a dwell time so that the live video from each camera appears for a customized length of time If a camera is offline then the tour skips that camera and the next online camera in the sequence displays live video 1 Tocreate a Camera Tour right click on the Camera Tour folder in the Camera Tree and select Add Camera Tour from the list of options See figure 16 Figure 16 1 1 Views Doors HH Garage entrances BH Back exit doors H front entrance of storage doors Camera Tour Add Group Edit Group Delete Group Add Camera Tour rip Ert iiem T Edit Camera Tour 2 Inthe Add Camera Tour dialog box enter the name of the tour in the Name field See figure 17 Figure 17 J Sites 216 138 72 28 DV200L 216 138 72 28 216 138 72 28 PVO200 18 a DV200L
6. cameras to the razberi NOTE Provide the razberi 3 5 minutes of start up time prior to connecting a PC or cameras 2 Login by selecting Profile or Discover Server Select the connection as either LAN or Remote If the razberi server resides on a local area network then login with the LAN connection option selected If the server is outside the local area network then login with the Remote option selected 3 Use the Discover Server option to auto discover the server Use the drop down in the Select Server field to see a list of available servers with the corresponding IP address NOTE The list displays servers discovered within a LAN 4 The default user name and password are admin admin Figure 7 razberi technologies v 3 0 0 61 Server w BProfle Discover Server Server Type Server Username Password Connection LAN Remote 1 razberi Technologies 3 2 Creating a Profile Select Profile in the Login dialog box to add a profile Use the Profile screen to create a new profile edit an existing profile or delete a profile The fields located on the Profile screen are described below New Edit Select the profile to create edit and or delete Profile Name This field is for the desired name for the profile Server Type Select the type of server from the dropdown Server Select the appropriate IP address from the dropdown or enter it in the field Use
7. 2 Network Cameras DHCP Clients XXXX XXXX XXXX 104 A DHCP Client By Default 102 Uplink Port Corporate Network Router DHCP Server DHCP Pool Range 00 200 Client Station Client Station 100 101 Figure 3 Network Cameras DHCP Clients XXXX XXXX XXXX 104 ap 03 AA Camera Ports Razberi DHCP Server Enabled Uplink Port 192 168 9 1 Dedicated Network Client Station Client Station 00 10 razberi M Technologies 9 An existing network allows the razberi and connected cameras to acquire addresses from an existing router DHCP Server automatically Follow the steps below to install the razberi on an existing network 1 Connect the uplink port on the razberi to the existing network Power up the unit Connect the cameras to the LAN ports on the razberi Either 1 4 or 1 16 By default the razberi and connected cameras acquire addresses from the existing DHCP server router automatically Use the razberi Utilities CD included in the razberi package to install the client software To install the client software without the Utilities CD access http ipaddress razbericlient from within a browser web page and follow the installation process See figure 6 The razberi
8. Audio Available Cancel A General Information tab See figure 31 This tab consists of a Camera Details section which contains the following options Name This field is the name of the camera Description The description of the camera is in this field IP Address This field is for the IP address where the camera is configured Brand This field is for the brand name of the camera Video Format Select the video format from the dropdown Model This field is for the camera model Username Enter the user s name to view the camera s administration details Password Enter the user s password Only the administrator can reset the password Change Credentials Click this option to change password information CamGUID mac ID This field is for the unique camera ID PTZ Select the controls for PTZ enabled cameras only Audio Select this option to enable audio Apply Click this option to apply and save the changes Cancel Click this option to disregard the changes and close the window Note CamGUID MAC ld is mandatory when adding a camera B Recording Schedule tab Users can set the recording schedule of a camera two ways 1 Event based The recording starts when an event triggers Select all three boxes for motion contact and audio events to record 2 Time Based Users can set time based recording two ways e Always Select this option for continuous recording 25 e Custom Schedule Select this option to cho
9. Cameras Use this feature to disable camera from the camera list This feature is available to use for multiple cameras Note Disabling a camera stops all recording from that camera To disable a camera 1 Access the Administration window 2 Select the Camera Management tab 3 Right click on a camera row in the Camera List table 4 Select Disable Camera from the list of options or click the Disable Camera button on the bottom of the window 5 In the confirmation window click Yes to disable or No to cancel 3 14 1 5 Removing Cameras Use the Remove Camera feature to remove a camera from the list of available cameras To remove a camera 1 Access the Administration window 2 Select the Camera Management tab 3 Right click on a camera row in the Camera List table 4 Select Remove Camera from the list of options or click the Remove Camera button on the bottom of the window 5 Select Yes to remove the corresponding camera from the list Note When removing a camera a prompt appears with the following message Are you sure you want to remove the camera Selecting results in the loss of video recordings for this camera Select Yes to remove the video from the camera After clicking Yes the video from that camera 15 no longer accessible 3 14 1 6 Resetting Cameras Use this option to return the camera to default settings To reset a camera 1 Access the Administration window Select the Camera Management tab Right clic
10. Megapixel resolutions Auto camera discovery Auto camera configuration Embedded Operating System 3 yr Warranty on hardware amp software 1 2 Package Contents Ensure that the package contains the following items listed below for the 4 channel unit lt razberiTT MP Power Supply Power Cord Wall Mount CD Ensure that the package contains the following items listed below for the 16 channel unit razberi MP 1 3 Overview The razberi MP Series dramatically simplifies and reduces the costs of megapixel video deployment The razberi plug and play operation enables installers with minimal network expertise to deploy an IP video system in the same or less time required for a traditional DVR and analog camera deployment The razberi MP Series combines the functions of a network video recorder high powered Ethernet switch and video management software with auto setup features into a single device The razberi automatically provides power high PoE and IP addresses configures cameras for motion detection and automatically begins recording For smaller systems there is no need for installers to source switches routers software and servers Installers can use multiple razberi units within a network to build large systems over long distances with fiber optics using the built in SFP Combo Uplink Ports The easy to use razberi software offers digital zoom camera tours PTZ control and inte
11. Online Help System does not fully address a question or issue within the application click on the Help icon in the Tool Bar and select Technical Support The Technical Support dialog box provides information on contacting a technical support specialist razberi M Technologies 33 4 IE 1 Video a How do create Views To create a view right click on the view folder within the Camera Tree and select Add View A view can be named and configured as a pre defined layout of cameras that can be setup by individual users Use views for quick visualization of areas of importance and for tours which are camera sequences that users can include within a view or add later by editing a predefined view See the Views section for more information b How do save Views After creating a view save it by clicking Finish within the View Menu setup See the Views section for more information c How do create Tours Create a tour by right clicking on the tour folder found within the Camera Tree and selecting Add Camera Tour Tours are pre defined views of cameras that are sequentially displayed one after another with a specified dwell time between alternating camera views See the Camera Tours section for more information d How do save Tours After creating a tour save it by clicking Finish within the Tour Menu setup See the Camera Tours section for more information e What is Digital Zoom and how do operate it Digital
12. during use to ensure adequate cooling of the device Prevent direct exposure to radiant heat sources Contact the provider if replacement parts are required Use only the parts upgrades and options sent from the provider 2012 razberi Technologies v3 02 12 All rights reserved razberi Technologies makes no warranty of any kind with regard to this material including but not limited to the documentation function and performance of these programs and their suitability for any purpose razberi Technologies shall not be liable for any errors contained herein for incidental or consequential damages in connection with the use of this material This document contains proprietary information protected by copyright No part of this document may be reproduced without prior consent of razberi Technologies razberi Technologies Table of Contents C JAFE TI ARNIN O M E ie e A EEEE ac EREE ov OE EEEE EE EERS 1 ERROR 2 1 TWO 5 1 1 RE 5 1 2 PACKAGE EN 9 1 3 5 2 PREPARATIONS amp INITIAL SETUP ss 6 2 1 NS 6 2 2 CONNECTING A PC AND CAMERAS TO THE RAZBERI INSTALLING A RAZBERI 7 2 3 Jr AER er MR 8 3 RAZBERI SOFTWARE AN TE er evt EU et pyafe issus Ms 11 3 1 EN 11 9 4 GREATING a PROMILE 12 3 3 FUE TING die e I ate an fet E E 12 3 4 E
13. electric shock Do not service any product yourself Opening or removing covers that are marked with warning symbols or labels may expose you to electric shock Service needed on components inside these compartments should be done by an authorized service provider Replace any batteries with the equivalent battery type Failure to do so may cause damage or bodily injury There is a danger of explosion if batteries are incorrectly replaced Dispose of all used batteries according to the manufacturer s instructions Install the system in an environment where the ambient temperature does not exceed the maximum rated ambient temperature of the rack mount system Ensure there are no obstructions to the case ventilation Blocking any of the built in airflow may cause overheating The product must be connected to a circuit with an adequate rating to prevent an over current condition on the circuit Slots in the product are provided for ventilation and should never be blocked or covered since these protect it from overheating The openings should never be blocked by placing the product on a flexible surface The product should not be placed in a built in apparatus unless the apparatus has been designed to accommodate the product proper ventilation is provided for the product and the product instructions have been followed Operate the product only from the type of power source indicated on the product s electrical ratings label If you have questions about the
14. right click on thelP address 2 Choose Rename Site from the list of available options See figure 12 3 Enter the desired name in the appropriate field and click OK The new site name appears in the Camera Tree Hover over the site name to view the site s IP address as a tool tip 3 6 1 5 Deleting Sites 1 To delete a site from the application access the Camera Tree 2 Right click on the corresponding site to disconnect and delete it See figure 12 3 Choose Delete Site from the list of available options NOTE Users cannot delete the primary site 3 6 2 Views Users can create and save specific camera views within the application Adding a defined view provides video from selected cameras from any site that is visible in the application The predefined views are stored within the Views folder located in the camera tree 1 To add anew view right click on the View folder in the Camera Tree 2 Select Add View from the list of available options See figure 14 Figure 14 4dd Group Edit Group Delete Group Add View Edit View Delete View Open View Refresh Site 3 Multiple monitors are supported A view must be created first Then right click on the view and select Secondary Screen_X This will place the selected view on that monitor 3 6 3 Groups To save specific layouts and camera views the application provides Groups A Group is a collection of saved camera view sand Live View Layouts for selected cameras
15. type of power source to use contact your authorized service provider The power outlet for the power cord should be easily accessible and located as close to the equipment operator as possible When you need to disconnect power to the equipment unplug the power cord from the electrical outlet When disconnecting a power cord cable from an outlet pull on the connector Never pull on the cable itself to disconnect from the power source Handle all equipment with care when disconnecting from the product or the power source Equipment may be hot The power cord must be properly rated for the product and for the voltage current marked on the product s electrical ratings label The voltage current rating of the cord should be greater than the voltage current rating marked on the product Do not overload an electrical outlet power strip or convenience receptacle Use care when moving products to other countries with different voltage standards Substitution for the power supply may result in destruction of the product or personal injury Unplug the product from the wall outlet prior to cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Never insert a foreign object into the product s openings or ventilation slots The product should be placed away from radiators heat registers stoves or other pieces of equipment including amplifiers that produce heat Allow sufficient air circulation around the product and power supply
16. zoom is the ability to more closely view a selected camera shot by digitally zooming into a picture Select the camera and choose Digital on the bottom left side of the client Digital zoom is available for both live and playback mode and is most effective with higher MP cameras that have higher resolution settings See the Zoom Control section for more information f How do I operate Live Video and Recorded Video Live video mode is the default display when the client is first launched To select cameras for viewing double click on the cameras within the Camera Tree or select a predefined view tour Access recorded video by selecting the Search icon on the upper left hand corner of the Tool Bar Within a search the user can define up to four different cameras by time date and alarm and play them back simultaneously for maximum effect The user can determine whether or not to digitally zoom print pictures or archive the video off the server to a specified location for later use See the Live View Screen and Recorded Video sections for more information 2 Logging On a What is a profile Profiles are predefined logins associated with the user list defined by the administrator of any particular server By defining profiles that match particular users the system administrator can monitor the system and protect it from unauthorized personnel Profiles can incorporate many servers both local and remote See Creating a Profile for more information
17. 00 02 00 04 00 06 00 08 00 10 00 12 00 14 00 16 00 18 00 20 00 22 00 24 00 MES ELEME 11 000000000 110000000 000011 adaa 00 00 02 00 04 00 06 00 08 00 10 00 12 00 14 00 16 00 00 20 00 22 00 24 00 10 00 1 10 14 00 00 00 02 00 04 00 06 00 06 00 0 2 0 16 00 18 00 20 00 22 00 24 00 NA AA A 00 00 02 00 04 00 06 00 08 00 10 00 12 00 14 00 16 00 18 0 20 00 22 00 24 00 TETTE Camel Creating New Schedules 1 To create a new schedule click the New button on the Custom Scheduler tab The Add Schedule screen displays Provide a specific name for the schedule in the Name field e g After Hours Morning Shift Click and drag the appropriate date time values to create a custom schedule Click Apply to apply the newly created schedule to a selected camera Click Ok to save the changes apply them to the current camera and close the window Note In the Custom Scheduler tab newly created schedules display an X next to the name signifying there are no cameras currently using the schedule The checkma
18. N SO RE EN in easy n a ei a kt lk e n tk 12 3 5 TOOL DAR 13 3 6 PI MI ecco at ta jan kin kal ek aa aki 14 3 6 1 SI 14 9 0 11 Aid 15 3 6 1 2 ONIN CINE SLS 6 COMING CHA si 15 3 6 1 4 Renaming SOS e at ke a ti ao e E 16 SMe ales STUNG ES 16 3 6 2 16 5 6 3 GO 16 3 6 4 17 3 7 Wei dio a ii an nt nn 17 3 8 R zsirzeEioU 18 D AGOM o yo MNT 19 3 9 1 KW VIG WE ZOOM ON cee cease 19 3 10 AR 20 3 11 SEARCHING RECORDED VIDEO donne aie asse ak 20 Search Main Screen se 20 Olde Paoackzoonmeontiol 21 2 12 vr 22 3 12 1 PDC O i E E E 22 3 12 2 Synchronous and Asynchronous Playback nares terunt tette tt amat datu shutter 22 3 12 3 ind OSI 29 2 13 sug beat 23 3 14 ADMINISTRATION WINDOW 24 3 14 1 Camera Management 4 24 3 14 1 1 Editing Camera B IRI ORM AU ON RR RN RR 25 3 14 1 2 AoE 26 3 14 1 3 EIA MT EE EET 26 3 14 1 4 Disabling CANNOT AS RENE 27 3 14 1 5 SS 27 3 14 1 6 Res
19. User Management tab 2 Delete User feature prompts the administrator for approval 3 Click Yes to delete the user and his or her permissions 3 14 4 System Preferences Use the System Preferences tab to customize the application to meet specific requirements To access the tab open the Administration window and select the System Preferences tab Within this tab users can access the Global Recording Settings Camera Default Login and Custom Scheduler to customize the corresponding features See figure 35 Figure 35 Global Recording Camera Default Login SMTP Details Custom Scheduler 3 14 4 1 Global Recording Settings Use the Global Recording Settings tab to customize the Event Pre Buffer Time and Event Record Duration for recording modules To access the tab open the Administration window select the System Preferences tab and view the Global Recording Settings tab 1 The Event Pre Buffer Time field provides the ability to customize the pre buffer time When the application detects an event in a specified area of a viewed image it begins archiving the video from a designated time prior to the event Recording imagery based on movement has advantages of conserving hard drive space and spending unnecessary amounts of time reviewing hours of video searching for the event 2 The Event Record Duration field provides the ability to customize the amount of time the application records an event Use the available fields to
20. Zoom Control In the Live View screen the Zoom Control section 15 in the lower left corner The default zoom type is Digital Use the Digital option to zoom in and out of the selected live video displaying in the Live View window 1 To digitally zoom in or out of live video select the Digital option 2 Use the controls to control the zoom viewing the camera s live view See figure 19 amp 20 Figure 19 3 Use the mouse to click and drag the zoom boundary box and move to the desired zoom area a Example zoomed image See figure 20 Figure 20 3 30 2012 0200 18 53 19 AN fe X The Zoom Controls are as follows e Zoom In Return to Original View T o Zoom Out lt Use the Mechanical option to control a PTZ camera 1 To mechanically zoom in or out of live video select a live video stream for a PTZ enabled camera 2 Select the Mechanical option 3 The PTZ controls display in the bottom left corner of the corresponding live video tile Click on the live video tile for the PTZ enabled camera 4 Use the arrows to control the PTZ camera The features of PTZ enabled cameras may vary Possible features include pan tilt iris and focus The application offers preset positions using the PTZ controls Select any preset position and the PTZ enabled camera moves to the corresponding preset position razberi Technologies 20 3 10 Alarm Window The Alarm window displays at the bottom of the Live Vi
21. adjust the times in seconds Use the field descriptions on the left of each field as guides for the available ranges Click Save Changes to NVR to save the updated recording times 3 14 4 2 Camera Default Login Use the Camera Default Login tab to customize the default login credentials of any camera connected to the application All camera authentication services refer to this table to login to the video view page To access the tab open the Administration window select the System Preferences tab and click the Camera Default Login tab To customize the information double click on the Username and Password fields in the available table Click Save Changes to NVR to save any changes razberi Technologies 31 3 14 4 3 Custom Scheduler To access the tab open the Administration window select the System Preferences tab and click the Custom Scheduler tab The features in this tab allow administrators to create customized recording schedules for each camera connected to the application If a custom schedule exists administrators can apply that schedule to a specified camera using the available dropdown See figure 36 Figure 36 t E New Schedule Clear All NVR Time 3 30 2012 2 23 55 00 00 02 00 04 00 06 00 10 00 12 00 14 00 16 00 13 00 20 00 22 00 24 00 02 00 4 0 06 00 08 00 1 12 00 14 0 16 00 18 00 22 00 24 02 00 4 00 06 00 08 00 1 12 OO AA ON A A A A 0
22. ame Username Password Email and SMS Gateway Select the preferred method of contact by checking either Email or SMS User Permissions Use this section to manage the application s user permissions Select either Administrator or Limited to determine the type of user Administrators can also manage the individual camera permissions using the table The User Management tab allows administrators to manage user access to the application Administrators can Add Users Edit Users and Delete Users See below for more information razberi Technologies 30 3 14 3 1 Users 1 Administrative users can add and assign permissions to new users with the Add User button located below the User List on the User Management tab 2 Complete the fields with the new user information at the top of the dialog box 3 Select the desired checkbox next to each camera to assign Live View Playback SMS text message or email capabilities 4 Save changes after each user entry by clicking the Save button 3 14 3 2 Editing Users 1 Administrative users can edit the permissions to current users with the Edit button located below the User Details section on the User Management tab 2 Edit existing user permissions with this feature 3 Save changes before exiting the window by clicking the Save button 3 14 3 3 Deleting Users 1 Administrative users can delete current users with the Delete button located below the User Details section on the
23. connected Akemate DNS server Notify me when this connection has limited or no connectivity Select the Use the following IP address option and enter a valid IP address e g 192 168 9 5 Tab through the Subnet mask field and set the Default Gateway field to the address of the razberi 9 192 168 9 1 razberi Technologies a Tab through the remaining fields Click Ok Click Close Connect the Uplink port on the razberi to the client PC or to a switch Insert the razberi power cable into an available power outlet following the safety guidelines Allow 3 5 minutes Use the razberi Utilities CD included in the razberi package to install the client software To install the client software without the Utilities CD access http 192 168 9 1 razbericlient http ipaddress razbericlient from within a browser web page and follow the installation process See figure 6 Figure 6 Razber Technologies inc Razberi Client Name Razberi Gient Version 3 0 0 245 Publisher Razberi Technologies Inc razberi Technologies 3 razberi Software Introduction DE Welcome to razberi The topics within this guide provide basic information and instruction on razberi software The razberi application offers digital zoom camera tours PTZ control and intelligent video searches to retrieve recorded events through event searches Automatic software updates offer new softwa
24. e following fields See figure 31 Name This field is the name of the camera Description The description of the camera is in this field IP Address This field is for the IP address where the camera 15 configured Brand This field is for the brand name of the camera Video Format Select the video format from the dropdown Model This field is for the camera model Username Enter the user s name to view the camera s administration details Password Enter the user s password Only the administrator can reset the password Change Credentials Click this option to change password information CamGUID mac ID This field is for the unique camera ID PTZ Select the controls for PTZ enabled cameras only Audio Select this option to enable audio Apply Click this option to apply and save the changes Cancel Click this option to disregard the changes and close the window Note CamGUID MAC Id is mandatory when adding a camera 3 14 1 3 Enabling Cameras Connected cameras enable automatically by default To manually enable a camera 1 Access the Administration window 2 Select the Camera Management tab 3 Right click on the camera row in the Camera List table or click the Enable Camera button on the bottom of the window 4 Select Enable Camera from the list of options 5 Click Yes on the confirmation prompt to enable the camera This feature is available for multiple cameras razberi Technologies 27 3 14 1 4 Disabling
25. earch for a particular event Users must complete the necessary search criteria using a dropdown under Events See Event Window for more information For more information on the razberi MP Series access the razberi Technologies web site at www razberi net razberi Technologies
26. ess in the IP Configuration section In the IP Configuration section enter the necessary information in the available fields Click Apply After clicking Apply a prompt window asks to reboot the server Click OK and the client window closes Re log in to the system The DHCP Server section contains two available radio button options See figure 32 1 2 3 4 5 Click the On radio button to turn on the DHCP server With the DHCP server the razberi gives out IP addresses Click the Off radio button to turn off the DHCP server With the DHCP server off the razberi does not give out IP addresses Click Apply After clicking Apply a prompt window asks to reboot the server Click OK and the client window closes Re log in to the system The section below the Server IP Configuration section provides fields to change the server ports Click Apply to apply the server port changes In the prompt window click OK 3 14 2 2 Figure 33 Port Configuration Date and Time Settings After connecting to the razberi login to the client and access the DateTime tab See figure 34 1 To view the tab click aa Administration icon click the NVR Management tab and select the DateTime tab In the Time Mode field select the Manual option In the TimeZone field use the available dropdown menu to select the appropriate time zone Click Apply A prompt appears stating It will take few minutes to
27. etting SAN A ik a n n EET 2i 3 14 2 NVR Management ee pa e aye M 27 3 14 2 1 Network Configuratigm nennen nnne nnnm nnn nnn nnn nnn nana nain tana 27 3 14 2 2 Date and Time Settings RR RR RE 28 3 14 2 3 Sieh Coke WU 29 3 14 2 4 NI 29 3 14 3 Suc st RR TERT 29 3 14 3 1 Fading JOET 30 razberi Technologies 3 14 3 2 zo ROT Ekipe a tt TP 30 3 14 3 3 BIEN e 30 3 14 4 SUSISIT Sassi dest orato adit Mata kn tetas cs dud ia ie apeti ane 30 3 14 4 1 C o ors Mn 30 3 14 4 2 Camera elu Ni pueris etoile ies tuis e n mt e e ka pk kal 30 3 14 4 3 CUSTOM SCN AU Glas ly e a a EE ge 31 3 14 5 REG 32 3 19 32 9 19 1 eM tn PP ERE E 32 9 192 SEMEN IFITOFITIQ ORE cod coder tena euet da cus eoo atcur tus dure ua DER need dos vag 32 9159 Sam I ET 32 3 15 4 TECNICAL SUDDO air e a a E J FE ANG ei A a ot nn cee E Qa 23 razberi Technologies 1 Introduction Welcome to razberi Use this guide as reference to assist with common razberi hardware and software functions For additional help contact razberi Customer Support 1 1 Features Embedded PoE Switch 4 and 16 port Gigabit Uplink port RJ45 Gigabit Uplink port SFP Combo e SATA port for external storage High PoE 802 3at Easy and automated installation H 264 Recording at
28. ew screen This window can be used to monitor all the alarm events being received by the razberi unit Figure 21 Alarm Window Period 30 Minutes Event Type oe Ku UD QUU Start Alarm J Event Type Event Name Camera Name Event Time Live Playback Remove X Use the Alarm window to monitor video Use 4 X icons on the right side of the Alarm window to hide or close it 1 To add cameras for monitoring click the Cameras button and select the necessary cameras All cameras that are checked will show events in the alarm window 2 Click the Start Alarm button to begin monitoring with the selected cameras Click the button again to stop monitoring See figure 22 Figure 22 gt Ites w 216 138 72 28 ES Pvo200 18 3 11 Searching Recorded Video The application stores recorded videos To access the Recorded Video screen click the Search icon in the Tool Bar Use the Search feature to retrieve recorded videos from the application for corresponding cameras by date and time The Recorded Video screen appears by default with the Tool Bar on the top Search window pinned on the left Recorded Video Display on the right and the Slider window across the bottom of the screen Use the Zoom Controls in the lower left corner of the playback window to zoom in and out of recorded video 3 11 1 Search Main Screen The Search window offers the following features See figure 23 o Search four videos simu
29. g items available in the network See figure 10 Sites and Cameras Views o Groups e Camera Tours This icon signifies a connected Camera This icon signifies a PTZ Camera euh This icon signifies an offline Camera Figure 10 Camera Tree Ec Sites Ef 192 168 0 100 AXIS M3014 1 NIB 2150 NID 213M CO Views 9 Camera Tour 3 6 1 Sites The site is the server used to log into the application The IP address of the server is referred to as the primary server and displays under the Sites folder in the Camera Tree After logging into the system with the primary server users can add secondary servers The multi site feature allows access to more than one server within the application The added secondary sites appear under the Sites folder in the Camera Tree NOTE Click the next to the appropriate site IP address to view the cameras associated with each site 1 To refresh the videos displaying from a particular site access the Camera Tree 2 Right click the name of the site and select Refresh Site from the list of available options 3 The system may take a few seconds to refresh the video displays razberi Technologies 3 6 1 1 Adding Sites 1 To add multiple sites to a profile access the Camera Tree and right click on the Sites folder A list of available options displays See figure 11 Figure 11 Add Group Edit Group Delete Group Add New Site Connect Site Disconnec
30. k on a camera row in the Camera List table Select Reset Camera from the list of options or click the Reset Camera button on the bottom of the window Select Yes to reset the corresponding camera noe