Manual EN - Victoria Arduino
Contents
1. LIBRETTO ISTRUZIONI Istruzioni Originali USER HANDBOOK Translation of the Original Instructions MANUEL D INSTRUCTIONS Traduction des Instructions Originales GEBRAUCHANWEISUNGEN Ubersetzung der Originalanleitungen INSTRUCCIONES DE MANEJO Traducci n de las Instrucciones Originales DICHIARAZIONE DI CONFORMITA CE EC DECLARATION OF CONFORMITY C _ _ Via M D Antegiano 6 62020 Belforte del Chienti MC ITALY Dichiariamo sotto la nostra responsabilit che il prodotto Declare under our responsibility that the product SISTEMA ELETTRONICO DI MACINATURA PER CAFF MODELLO MYTHOS ELECTRONIC INSTANTANEOUS COFFEE GRINDER SYSTEM MODEL MYTHOS VERSIONE 110V 60Hz 230V 50Hz VERSION 110V 60Hz 230V 50Hz SERIE AA SERIES AA MATRICOLA DAL N 0001 01 SERIAL Nr 0001 01 al quale si riferisce questa dichiarazione costruito in conformit alle disposizioni to which this declaration relates following the provisions of the directives D P R N 777 del 23 08 82 89 109 CEE recepita con D Lgs 108 92 CEE 98 37 recep con D P R 459 96 CEE 73 23 CEE 89 336 e CEE 93 68 recepite con D Lgs 615 96 e 626 96 86 594 CEE recepita con D Lgs 134 92 2002 95 CE 2002 96 CE 2003 108 CE recepite con D Lgs 151 05 2006 42 CE ed conforme alle direttive following the provisions of the Directives UNI EN 12100 1 2 UNI EN 294 CEI EN 55014 1 2 CEI EN 61000 3 2 3 CEI EN 60335 1 CEI EN 603352. it inoperative unplug the appliance from the mains socket and cut off the power cord All defects and or anomalous machine behaviour should be reported immediately to authorized installation and or maintenance personnel Before connecting the machine check that electrical power supply corresponds to the specifications on the data plate Should the machine plug not be compatible with your socket have the plug replaced with a suitable type by a qualified technician who should also check that the section of the wires supplying the power outlet is suitable for the machine power requirements Avoid use of multiple plug adapters and extension cords The ground wire must be connected the electrical system must meet the standards set by local safety laws and regulations The machine must be installed only by authorized qualified personnel Check that the machine components have suffered no damage during shipping in the case defects or anomalies are found interrupt installation and request replacement APPLICATIONS AND USE This grinder dispenser has been devised for professional use by trained personnel The grinder dispenser must be used only for the application for which it was designed that is grinding roasted coffee beans Any other use must be considered improper and therefore dangerous The manufacturer shall not be held responsible for damages deriving from improper erroneous or unreasonable use of the machine The appliance must n
3. 0 to 10 indicated by Tm Pressing this key it is possible to change the lighting of the ACTIVE keys on a scale from 0 to 10 indicated by TM Pressing this key it is possible to change the lighting of the display on a scale from 0 to 7 indicated by D oo GG Pressing this key at this stage of adjustment proceeds with operations by storing the set values to memory ADJUSTING LIGHTING DURING STANDBY It is not possible to set a standby value above that set for normal operation and therefore any value can be increased as far as the normal operating value Pressing this key it is possible to change the lighting of the NON ACTIVE keys in standby on a scale from 0 to 10 indicated by Tm standby on a scale from 0 to 10 indicated by Tm Pressing this key it is possible to change the lighting of the display on a scale from B Pressing this key it is possible to change the lighting of the NON ACTIVE keys in 0 to 7 indicated by D Pressing this key at this stage of adjustment proceeds with operations by storing the set values to memory The function then returns to the language setting page CLEANING AND MAINTENANCE ZN WARNING Disconnect the machine from the electrical source before carrying out any cleaning or maintenance operation Z WARNING Do not pull on the electric cable nor the machine itself to remove the plug from the electrical outlet CLEANING At least once a week it is nec
4. machine should switch off accidentally the password will remain stored in the memory only if after the store step has been completed during CONFIRM PSW If the user forgets the password it is possible to access the programming function using the RELEASE CODE press and hold down for 10 seconds the 00000009 then press the Q key to confirm this will disable the previously set password and make it possible to access the programming function The whole PASSWORD function is active for all operating modes in the MANUAL and AUTOMATIC modes it blocks access to all programming However in BARISTA mode it is still possible to edit dose times but it is not possible to access counters LANGUAGE SELECTION During programming it is possible to choose the language Italian English French German Spanish using the flashing key each time the key is pressed this selects the mode shown in the centre of the display When the key is pressed again this quits the programming function To quit programming at any time without having to view all the steps press and hold down the key for 5 seconds ADJUSTING LIGHTING DURING NORMAL OPERATION If the keys and are held down for 8 seconds from the language select screen this will open the lighting adjustment function for the keys and the display MYTHOS 25 no ED Pressing this key it is possible to change the lighting of the NON ACTIVE keys on a scale from
5. si riserva di apportare tutte le modifiche ritenute necessarie
6. 2 14 CEI EN 50366 EN 60704 1 1994 Data Marzo 2015 L Amministratore Delegato Date March 2015 Ottavi Nando iti Arda n Versione Italiana 0 iii Pag 4 English version cccccesscseceeeeeeseeeeeeeeeseneeneseeees Pag 16 Version frangaise 1 rrriiiiiii Pag 28 Deutsche Version _ 1r rr Pag 40 Versi n espa ola ssicirisiuso seso iti Pag 52 MYTHOS 1 MYTHOS 3 1 GENERAL INFORMATION MANUFACTURER VICTORIA ARDUINO Via M D Antegiano 6 Belforte del Chienti Macerata Italy MODELS MYTHOS Electronic instantaneous coffee grinder system 2 TECHNICAL DATA MODEL DESCRIPTION MYTHOS 220 MYTHOS 110 Volts V Frequency Hz Power W El Motor power W Production rate Kg h Empty weight Kg Height mm Width mm Depth mm Noise factor dBA 3 APPLIANCE DESCRIPTION see page 2 Fig 1 1 Body machines 9 Dynamometric presser 2 Coffee bean holder on the appropriate model 3 Holder lid 10 Fork 4 Switch 11 Pouring lip 5 Control panel 12 Drawer 6 Start up micro switch 13 Open closer holder tab 7 Frontal door 14 Grinding adjustment knob 8 Dynamometric presser lever 15 Presser adjustment knob on the appropriate model on the appropriate model 4 CONTROL PANEL see page 2 Fig 2 1 Liquid crystal display 2 Lit key for 1 coffee dose 3 Lit key for 2 coffee dose 4 Lit key for 3 coffee dose 5 Li
7. AMMING OF GRIND TIME To programme the grind time of the machine press together the buttons In this manner you will enter into the programming mode and on the display will appear the words PROGRAMM DOSES the three dosage buttons will flash contemporarily 6606 Once the dose to be programmed has been selected the gauge will be set as shown in the display below with the time expressed in seconds top right of the display The characters on the line at the bottom of the display concern the keys below e Refers to the symbol and reduces the grind time 6 Refers to the word TEST and by pushing this button at this time will cause an immediate test of the time programmed with microswitch at the base of the fork completely pressed in B Refers to the symbol and increases the grind time Refers to the word SET and memorizes the time programmed MYTHOS 21 O refers to the gt symbol which permits the continuation of the programming even of other eventual dosages to be programmed that will continue flashing PROGRAMMING OF THE SINGLE IMPULSE Proceeding in the programming you enter the setting of the access time to the single impulse What is the single impulse immediately after having any dosage of coffee the machine will always place itself in the single impulse mode for a brief period of time the button will flash and then return to the dose mode This is the ti
8. ainer 2 see Fig 1 for any reason whatsoever while the appli ance is operating e Always switch off the appliance before removing blockages from the pouring lip e Never place the appliance in water or other liquids e Should a foreign body stop the motor switch the machine off immediately and contact an authorized service center e Should a foreign body stop the motor switch the machine off immediately and contact an authorized service center A WARNING Those machines bearing the EL MOTOR WITH THERMAL PROTECTION label are equipped with device which protects the motor from overheating When this device is engaged do not attempt to operate the machine isolate the machine from the power supply and eliminate the cause of the trouble before re starting INSTRUCTIONS FOR USE PREMISE This machine is capable of producing very precise doses since it bases itself on the time of the grind It is however necessary to fine tune the machine before starting to work above all deciding the blend of coffee lighter or darker roast and the grade of grind You then proceed to programming the time of grind for each dosage weighing the ground product e While installing the appliance make the electrical connection complete with equipotential earth connection see Fig 4 After connecting to the electrical outlet open the cover 7 see Fig 1 and close the flap 13 see Fig 1 at the base of the whole bean coffee container 2 Remov
9. be set to zero at an established grinding point by holding the top part of the knob in position and using the ring nut on the base of the knob itself Caution grinding fineness adjustment needs to be performed gradually grinding a little coffee each time that the knob is turned by two numbers notches The machine may seize up if the knob is moved by one turn while the motor is switched off REGULATION OF THE PRESSING POWER on the appropriate model To adjust pressing force it is also necessary to open the hatch 7 then to use the graded screw 15 see Fig 6 turning it clockwise to increase the pressure or anticlockwise to reduce it PROGRAMMING OF THE MACHINE The first time you turn on the machine it will be on the mode programmed at the factory Every time you turn on the machine it will set itself to the last set tings prior to disconnecting DOSE SELECTION IN AUTOMATIC MODE Place the portafilter and press fully the microswitch placed behind the fork see Fig 8 The machine will start after a moment and will not stop till the end of the programmed time even if the portafilter is removed from the fork When the machine finishes the grind it will automatically be in the single impulse phase The button will flash for a period of time and is programmable See Par 7 4 6 PROGRAMMING OF THE SINGLE IMPULSE during this period in time the user can add a little coffee by pressing the flashing button or place the portafilter
10. e the lid 3 from the container 2 and fill with whole bean coffee Bring the switch 4 to the ON position The red led on the switch itself will come on e Open the flap 13 and reclose the cover 7 e Place the portafilter on the fork 10 see Fig 7 and push forward till in contact with the microswitch 6 to allow the flow of ground coffee from the spout 11 see Fig 8 Removing the portafilter will not stop the flow of ground coffee since it is determined by the time previously programmed e Position the portafilter containing the dose of ground coffee in the fork 10 and lower the lever 8 till you hear a click see Fig 9 In raising the lever make sure that it re arms itself it must make another click for the next press MYTHOS 19 A E ZN WARNING To avoid the blockage of the spout 11 hold the portafilter on the fork 10 REGULATION OF THE GRIND To adjust grinding fineness it is necessary to open the hatch 7 and use the knob 14 see Fig 5 turning it clockwise for finer grinding or anticlockwise for coarser grinding This adjustment does not have any stop points and each turn of the knob corresponds to a movement of 0 4 mm of the grinders Grinding fineness is factory set with the grinders first adjusted so that they touch each other 0 and then moving the grinders so that they are at a distance to provide an average grinding fineness for espresso coffee Grinders with re settable adjustment knob can
11. essary to remove the coffee bean container 2 which simply rests on the machine body 1 This is to remove the oily layer left by the coffee beans using a clean cloth 26 MYTHOS ED A ZN WARNING Before removing the container 2 always remember to close the tab 13 otherwise it will not come away If this operation is not performed there is a risk that the grease will become rancid with negative effects on the flavour of subsequent cups of coffee For the cleaning of the base use a damp cloth ZN WARNING To clean the nozzle from any coffee blockage use a vacuum cleaner and a small brush taking great care not to fold or bend the PET flap This flap is extremely flex ible but a sharp fold could prevent it from functioning properly to the point that it needs to be replaced MAINTENANCE ZN WARNING Maintenance operations must be carried out by specialized personnel authorized by the manufacturer ZN WARNING Do not carry out unprofessional or dangerous repairs do not use non original spare parts Do not carry out unprofessional or dangerous repairs do not use non original spare parts IDENTIFYING BREAKDOWNS Contact specialized personnel MYTHOS 27 Graphics by J Type Engineering S r l MS9 Rev 00 del 03 2015 Via M d Antegiano 6 62020 Belforte del Chienti Macerata Italy Tel 39 0733 9501 Fax 39 0733 950242 www victoriaarduino com info VictoriaArduino it Victoria Arduino
12. handled carelessly Store such materials out of reach of children and irresponsible persons e This symbol on the appliance or package means that the appliance must not be consid ered as normal household refuse but that it must instead be delivered to an appropriate collection centre for the recycling of electric and electronic appliances Make sure that this appliance is disposed of correctly and you too will be making your contribution to the prevention of negative effects on health and the environment which could otherwise be caused by inadequate disposal Recycling materials helps to preserve our natural resources For more information about how to recycle this product you can contact your local council office local refuse disposal service or the retailer from whom you purchased the appliance Before carrying out any installation or adjustment process be sure to have read and thoroughly understood the warnings in this manual e The company cannot be held liable for any damage to people or property resulting from failure to respect the instructions concerning safety installation and maintenance contained in this manual MYTHOS 17 Coria Adizine ee lt gt The power cord of this appliance must never be replaced by the user In the event of damage switch off the appliance and only contact professionally qualified technicians for its replacement Should you decide to no longer use this type of appliance we recommend that you make
13. in the pressing base and press see Fig 9 DOSE SELECTION IN MANUAL MODE Place the portafilter and push completely the microswitch at the base of the fork on the display the writing CHOOSE DOSE will appear while all three dosage buttons will flash At this point press the dosage button of choice or the continuous grind button and the machine will start operating 20 MYTHOS Viloria Adusi DOSE SELECTION IN BARISTA MODE During operation in barista mode the display will appear as shown in the figure above the time for the dose will be shown in seconds on the left side at the bottom of the display while the relevant button will stay lit Using the and keys it is possible to reduce or increase the dose respectively this dose will be automatically stored to memory when grinding is enabled using the contact with the micro 6 or when another dose key is pressed The new set dose will not be stored to memory if the machine is switched off accidentally in this case the previous dose will remain in the machine memory SELECTING CONTINUOUS MODE IN AUTOMATIC PRESELECT Select the key for continued grinding and the appliance will be set as indicated here below Insert the filter holder cup or other device to collect the ground coffee until the micro switch at the base of the fork is pressed in fully the machine will start to operate and it will only stop when the microswitch at the base of the fork is released PROGR
14. isabled to eight 8 To enter a character in the sequence it is necessary to press and immediately release the required key the dis play will show an asterisk symbol To store the sequence it is necessary to press and hold down the key Q for about three seconds If the sequence is not entered and only the empty page is stored no password will be used On the next page CONFIRM PSW a password confirmation will be requested proceed as described above entering the same sequence storing it to memory with the key 2 Changing a previous password On the ENTER PSW page it is first necessary to enter and confirm the previous password before following the instructions provided in point 1 24 MYTHOS Viloria Aaii Once the password has been entered it will be requested for access to any programming function See Par 7 4 5 SETTING GRINDING TIMES Once entered the sequence needs to be confirmed with the Q key If the password entered is not correct the display will read PSW ERROR for about 3 sec onds before returning to its previous mode IS There is no limit to the error of entering the password If the machine should switch off accidentally the password will remain stored in the memory only if after the store step has been completed during CONFIRM PSW If the user forgets the password it is possible to access the programming function using the RELEASE CODE press and hold down for 10 seconds the If the
15. me to set from a minimum of 0 to a maximum of 7 secs to allow the addition to the dose if the quantity ground is considered insufficient With the button you access the setting of the time of activation of the single impulse that is for how long the single impulse should grind from 0 2 to 0 5 sec COUNT Continuing in the programming mode with the Q key it is possible to find out the count for the number of coffees prepared for each single key including each single pulse IS To return to the program mode re push the lit button 22 MYTHOS or to know the total number of coffees with the possibility of zeroing the quantity or to know the number of times the motor has started Finally it is possible to count the grind times the time the machine has continuously ground coffee can be zeroed is the total time in which the machine has been active cannot be zeroed MAINTENANCE SETTING Pressing this key it is possible to enable maintenance alarm Pressing this key when the maintenance alarm is enabled you enter maintenance threshold and maintenance counter reset otherwise you enter standard dose pro gramming SETTING OF MAINTENANCE THRESHOLD AND MAINTENANCE COUNTER RESET The threshold value is increased or decremented from a minimum of 10000 to a maximum of 100000 every 1000 by means of and Pressing this key the modification is confirmed 6 Pressing this key maintenance counter value
16. ning and maintenance also contribute to determining long machine life BASIC SAFETY PRECAUTIONS Never touch the machine with damp or wet hands Never use the machine when barefoot Never attempt to unplug the machine by pulling the power cord or the machine itself Do not expose the machine to atmospheric agents sun rain etc Never allow the machine to be used by children or by irresponsible persons 18 MYTHOS CS Vitoria Hoc Sa e Always use the appliance on a flat steady surface that is able to support its weight e Always unplug the machine from the power supply before performing any cleaning or maintenance operations e Do not use jets of water or detergents for cleaning e In the case of machine breakdown or malfunction switch the machine off and do not tamper with it e For repairs contact only an authorized service center and request use of original spare parts e Non observance of the above precautions may make the machine unsafe for future use e Do not leave the machine switched on when not in use Unplug the machine when not in use Do not obstruct the ventilation and or heat dissipation openings and or slits nor introduce water or any other liquids into same Do not obstruct the ventilation and or heat dissipation openings and or slits nor introduce water or any other liquids into same e Never insert spoons forks or other utensils into the pouring lip 11 see Fig 1 7 or into the coffee grain cont
17. ons This manual must be preserved with care the manufacturer declines all responsibility for damages to persons or things or to the machine itself deriving from improper use or use in manners other than those described herein or in the case the maintenance and safety precautions described herein are not respected PRESERVATION OF THE MANUAL This manual must at all times be available to the machine user and or the persons perform ing maintenance on the machine who must be provided with full information regarding cor rect machine use and residual risks This manual must be preserved in a clean dry place away from sources of heat This manual must be used in a manner such as not to damage any part of its contents Do not remove tear out or re write any part of this manual for any reason In case of loss of this manual or for further information please contact your area retailer or the manufacturer PRECAUTIONS AND SAFETY FEATURES Machine design has taken into account all reasonable user safety precautions neverthe less particular conditions of installation and or handling may create unforeseen situations beyond the installer s control which will require case by case evaluation of residual risks We recommend keeping the following in mind e Always handle the machine with care to avoid the danger of its falling e The packing materials carton cellophane staples polystyrene etc can cut wound or create hazards if used improperly or
18. ot be used by children or people with reduced physical sensorial or mental abilities It must also never be used by people without the necessary skills and experience unless under supervision or during training Do not allow children to play with this equipment at any time The machine is not designed for use in extreme environmental conditions and in any case at temperatures outside the 5 C to 30 C range The user must respect the general safety regulations in force in the country in which the machine is installed as well as the rules of common sense and shall be responsible for ensuring that periodic machine maintenance is correctly performed The persons installing and using the machine and performing machine maintenance shall inform the manufacturer of any defects or damages due to wear that might jeopardize the Original safety features of the machine The installer shall be responsible for checking that the machine is installed in tolerable environ mental conditions such as to not to create health or safety hazards for those using the machine Any responsibility deriving from components manufactured and installed on the machine shall be assumed by the respective manufacturers responsibility attributable to the per sons authorized to use the machine shall be assumed by the customer The machine is designed for 24 hour intermittent service The machine components are designed and built to ensure at least 1000 hours operation Good clea
19. s reset Pressing this key you enter the standard dose programming MYTHOS 23 If it is possible to reset the values for the dose keys by holding down the CONFIRM key for 2 secs MANUAL AUTOMATIC AND BARISTA MODE SELECTION Continuing the programming with the button will take you to the choice of manual automatic or barista mode which can be selected by pressing the flashing key each time you press the key you will be selecting the mode indicated in the top right hand corner of the display STOP AND GO FUNCTION ON OFF The STOP AND GO function serves to interrupt and then proceed with ground coffee dis pensing even several times until the set time of the dose has expired simply by pressing or releasing the micro 6 at the base of the fork 10 Pressing the flashing key switches the function ON or OFF This function can be used on all modes manual automatic and barista PASSWORD ENTRY The new software version includes the possibility to enter a password to prevent access to programming Once on the EDIT PSW page it is possible to enter or change a password by pressing the flashing key At this point there are 2 options 1 Entering a new password on the NEW PSW page all keys will be flashing and it is therefore possible to enter a combination using the flashing keys to create a sequence The length of the password in terms of characters keys entered can vary from zero password d
20. t key for single pulse key for Barista function 6 Lit key for continued grinding key for Barista function 5 6 Together access to programming 16 MYTHOS CEN m IMPORTANT INFORMATION This manual is designed for use by the user of the machine and or by those performing mainte nance on the machine and must be considered an integral part of the machine itself This manual provides information concerning correct use and appropriate maintenance of the machine as well as useful indications for ensuring user safety This manual must be preserved for the entire working life of the machine and must be transferred together with the machine to future users or owners The information contained in this manual must not be construed as substituting the safety prescriptions and the technical data regarding installation and operation carried on the machine itself and on the packing materials This manual reflects the current state of machine technology and shall not be considered obsolete solely because updated at a later date on the basis of acquired experience The manufacturer reserves the right to make modifications to this manual with no obligation to update previous versions except in exceptional cases Improper use of the machine or use in manners other than those described in this manual shall invalidate the guarantee conditions and shall release the manufacturer from all responsibility the machine must be used only by adult responsible pers
Download Pdf Manuals
Related Search