Home

DJM-900SRT

1. The original sound is changed to a sound like one produced by a robot Use this to set the degree of the effect sound 100 100 Use this to set the degree of the effect sound 100 100 Sets the balance between the original sound and the effect BEAT lt gt buttons parameter 1 TIME control parameter 2 LEVEL DEPTH contro param eter 3 sound X PAD parameter 4 This changes the degree of the effect sound MELODIC The mid range of the sound being input at the point when the ON OFF button is pressed is recorded and the recorded sound is output according to the level of the sound being input BEAT lt gt buttons parameter 1 This sets the way in which the recorded sound is played TIME control parameter 2 his sets the way in which the recorded sound is played LEVEL DEPTH control param This sets the balance between the original sound and the eter 3 recorded sound X PAD parameter 4 This sets the way in which the recorded sound is played SLIP ROLL The sound being input at the point when the ON OFF is pressed is recorded and the recorded sound is output repeatedly according to the beat fraction set with the BEAT lt gt buttons When the effect time changes the input sound is recorded again ome ne ero Effect a on changed from 1 2 oi ror er ote jik SSS EA AA 1 2 repeat 1 1 repeat Use these to set a
2. Stereo En uo1njewuojul Jeuonippy Acquiring the manual The operating instructions may be in a file in PDF format Adobe Reader must be installed to read files in PDF format If you do not have Adobe Reader please install it from the download link on the CD ROM s menu screen Downloading the latest versions of the operating instructions and the Quick Start Guide Serato DJ Edition 1 Insert the CD ROM into the computer s CD drive The CD ROM menu is displayed If the CD ROM s menu does not appear when the CD ROM is inserted perform the operations below e For Windows From the Start menu Computer or My Computer open the CD drive and double click the CD_menu exe icon e For Mac OS X In Finder double click the CD_menu app icon directly 2 When the CD ROM s menu is displayed select DJM 900SRT Download the Operating Instructions PDF file then click Start 3 An internet environment is required to access the site Connected to the internet is displayed Click Yes The web browser is launched and the Pioneer DJ support site is displayed http pioneerdj com support 4 On the Pioneer DJ support site click Manuals under DJM 900SRT 5 From the download page click the language for the documents you require Downloading of the operating instructions Quick Start Guide Serato DJ Edition starts Downloading the Serato DJ software manual 1 Insert the
3. Do not connect this unit and the computer until installation is completed e Logon as the user which was set as the computer s administrator before installing e f any other programs are running on the computer quit them 1 Insert the CD ROM into the computer s CD drive The CD ROM menu is displayed e fthe CD ROM menu does not appear when the CD ROM is inserted open the CD drive from Computer or My Computer in the Start menu then double click the CD_menu exe icon 2 When the CD ROM s menu appears select Download Serato DJ Software then click Start To close the CD ROM menu click Exit 3 An internet environment is required to access the site Connected to the internet is displayed Click Yes The web browser is launched and the Pioneer DJ support site is displayed 4 Click Software Info under DJM 900SRT on the Pioneer DJ support site Serato DJ Support Information is displayed 5 Click the link to the Serato DJ download page The Serato DJ download page is displayed 6 Log in to your Serato com user account e f you have already registered a user account on Serato com proceed to step 8 e f you have not completed registering your user account do so following the procedure below Following the instructions on the screen input your e mail address and the password you want to set then select the region in which you live f you check E mail me Serato newslet
4. BEAT EFFECT SND RTN Effect CH Select SEND Out No Cable Effect CH Select Return Level Effect Out e _CHx MIC In LTE ea FILTER Level TalkOver ON OFF MIK 3posi BPM Detect CFB BEAT EFFECT Others Effect CH Select Off On TalkOver BPM Detect MIC BEAT EFFECT MIC BEAT EFFECT Processing 3posi Send Return MIC Effect SW Master Balance Effect CH Select Effect Out o _CHx eo _ CF A B e _MIC e Master 2para 4para CHx_CUE Effect_CUE Mono Split Stereo Link_CUE SWITCH amp MIXING Master_CUE Mono Split Stereo SWITCH amp MIXING CHx Cue On Off SW cue gt ho Effect Cue On Off SW Cable Exist CableCheck Master Cue On Off SW T Master CUE loo R Level meter Master Digital out Master Master gt Limiter master CUE gt CHuTimecode H Boost USB Common out MIC CH1 4 COMMON Post CHx Fader Mixer Cross Fader A gt Audio Cross Fader B Select Rec Out gt MONO SPLIT STEREO SWITCH Output Mono Split H P MIX L Out i Stereo 2posi Y Mono Split H P MIX R Out
5. TALK OFF ON OVER O e e e ns CD LINE PHONO CD LINE PHONO DIGITAL USB USB G 3 LEVEL ON OFF ma se Geo DI E UTILITY uo1nje1ad0o DIGITAL 718 a ES PARAMETER IE 3 1 gt FO O OO CC CI CI CDC CYC OO OO OO 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DUB GATE SPACE ECHO COMP SOUND COLOR FX ose E End 07 FLANGER PHASER CD LINE PHONO DIGITAL DIGITAL MEJO EA 12 12 0 FILTER ROBOT CUE IE G TRANS MELODIC 6 CUE REVERB SLIP ROLL EY SPIRAL ROLL MONO STEREO ECHO REV ROLL FADER START ve DELAY E e SND RTN 1 4 yo UT CF A z BOOTH MONITOR a ooo e m 8 8 1 MASTER MONO SPLIT e e STEREO 5 7 7 7 JU 6 9 5 5 TIME MIXING 4 E 4 4 3 3 3 2 E 2 2 ml E 1 El 1 A EQ CURVE CS 39 0 0 0 o CUE MASTER LEVEL LEVEL DEPTH D A THRU B A THRU B THRU B A THRU B e 10 y Lee e Le ee eo Lee e 40 NS LUG US 5 5 xXx LL CROSS FADER ASSIGN _ CROSS FADER ON OFF PHONES E a MIC1 LEVEL control page 15 Adjusts the sound level output from the MIC1 channel MIC2 LEVEL control page 15 Adjusts the sound level output from the MIC2 channel EQ HI LOW controls page 15 These adjust the tone quality of th
6. With 1 1 beat echoes the delay sounds are faded out according to the track s tempo even after the input sound has been cut y input sound turned off Time 1 beat Use these to set a time delay of 1 8 16 1 with respect to the time of one beat of the BPM Use this to set the delay time 1 to 4000 ms BEAT 4 gt buttons parameter 1 TIME control parameter 2 LEVEL DEPTH control param Use this to set the balance between the original sound and the eter 3 echo sound X PAD parameter 4 Use this to set the delay time SPIRAL 2 This function adds a reverberation effect to the input sound When the delay time is changed the pitch changes simultaneously y input sound turned off Time 1 beat Use these to set a time delay of 1 8 16 1 with respect to the time of one beat of the BPM se this to set the delay time 0 to 4000 ms se this to set the balance between the original sound and the sjoajja jo sodA BEAT lt gt buttons parameter 1 TIME control parameter 2 cla c LEVEL DEPTH control param eter 3 effect sound and to set the quantitative parameter X PAD parameter 4 Use this to set the delay time REVERB 2 This function adds a reverberation effect to the input sound Direct sound Early reflected sound Level Reverberations A 1 Time 100 BEAT 4 buttons parameter 1 Use these to set the ext
7. 12 dBu 47 KQ MICT e JAGA 52 dBu 8 kQ RETURN arana e EII 12 dBu 47 KQ Standard output level Load impedance Output impedance MASTER Tirada 8 dBu 10 kQ 5 Q or lower WASTE NL adas 2 dBu 10 kQ 22 Q or lower RECO dei ae E 8 dBu 10 kQ 22 Q or lower BOO TA sicario 8 dBu 10 kQ 1 kQ or lower SEND aa 12 dBu 10 kQ 1 kQ or lower PHONES ot 8 5 dBu 32 9 1 Q or lower Rated output level Load impedance MASTER uu tii 26 dBu 10 kQ MASTER NA 22 dBu 10 kQ NE an se ie eds ee bee 82 dB Channel equalizer characteristic En 26 dB to 6 dB 13 kHz MA Ta PNT ne net A 26 dB to 6 dB 1 kHz LOW anaa ont a a a a iyi A 26 dB to 6 dB 70 Hz Microphone equalizer characteristic A Sen aa a a a he ote A 12 dB to 12 dB 10 kHz ON E E EE 12 dB to 12 dB 100 Hz Input Output terminals PHONO input terminal RCA DIN AG KS naka eed aana E A aa tin 4 sets CD LINE input terminal R OIA A en at eee is are in in sie 4 sets MIC1 input terminal XLR TRS ALR connector phone jack 0 3 MM sim endo 1 set MIC2 input terminal TRS PRONE jack 0 0 SMT sii cis 1 set RETURN Input terminals TS Phone Jae 6 3 ad 1 set DIGITAL IN coaxial input terminal PPT JAG KS ala ga pa a ag kaa idee 4 sets MASTER output terminal EE GGO easton e o o RS O A a Ka BAN a NE a a a aa a aaa BEN 1 set RCADIMACKS uirre en O NANA a ne ee 1 set BOOTH output terminal TRS OMI a 0 03 kena aka aaa A aa gana e aa TA na e a BG GK A K
8. 9 AA O A A OS RE ee PHONO Switch Note 056 O EAST AN mu CE AO CET ANN ema A Control cco e AA MID Control C08 OT O TA otro SCC fete AA A A O Ce dec OS e a EEN a psss ja fe Ti mu ona jeg AS T da ee 72M Mp Control CC e 0 E LOC fC E A AA A a O a e lt r ec i EEES o prono CU he e oa Contro ES PS CPE Gia A Control cc fete MID Contra ccoo OO LOW Control ecos o e Jar COLOR fon E aa TT Channeltadet control e A ANANG CROSS FADER ASSIGN _1Switen_4 968 __ _19 64 727 Crossfader Crossfader Conos CC Joa HEADER OZ ton Joc oe ate Fader curve cross raner ZS 7S D Switch ees er MASTER LEVEL gt gt gt Contra CCMA e BALANCE gt contra ecos ft EQ CURVE ISOLATOR EQ Switch fC te BOOTH MONITOR BOOTHMONITOR _ Control CC lar LINK i O O IS ONE 0 ON 127 ton Jor Ti Ice e A ton toh Cf Trigger Toggle OFF 0 ON 127 Trigger Toga OFF 0 ON 127 OFF 0 ON 127 ts es Trigger Toggle pw fun ewe ar 0 ON 127 BEAT EFFECTS dass OFF 0 ON 197 OFF 0 ON 127 22 En Button Control Switch Category Type MIDI assi
9. THRU B selector switch is set to B MIDI messages are sent when the FADER START button is set to ON and the crossfader is moved from the far edge of the A side and when it is moved back to the far edge of the A side dew juswubBbisse GIA Changing the settings 1 Press the ON OFF UTILITY button for over 1 second The USER SETUP mode setting screen is displayed e To display the CLUB SETUP mode setting screen first turn this unit s power off then press the POWER button while pressing the ON OFF UTILITY button 2 Press the BEAT lt gt button Select the setting item 3 Press the TAP button The screen switches to the setting item s setting value change screen 4 Press the BEAT lt gt button Change the setting value 5 Press the TAP button Enter the setting value The previous screen reappears e To return to the previous screen without changing the settings press the QUANTIZE button 6 Press the ON OFF UTILITY button Close the USER SETUP mode setting screen To close the CLUB SETUP mode setting screen press the POWER button to turn this unit s power off About the auto standby function When Auto Standby is set to ON the standby mode is set automatically if 4 hours pass with all of the conditions shown below met That none of this unit s buttons or controls are operated Tha
10. avoid injury from tip over LA a gt 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus D3 7 13 69_En NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or re
11. sequencer s MIDI IN terminal using a commercially available MIDI cable 2 Set the external MIDI sequencer s sync mode to Slave 3 Press the START STOP button for MIDI The MIDI start message is sent 4 Press ON OFF in the MIDI section Transmission of the MIDI messages begin Types of effects Types of SOUND COLOR FX effects Effect Name Descriptions COLOR control Turn counterclockwise Applies the reverberation effect to the mid and SPACE Applies a reverberation effectto low ranges the original sound Turn clockwise Applies the rever beration effect to the mid and high a EE Applies an echo effect withthe Turn counterclockwise Applies the sound delayed slightly after the echo effect to the mid range only DUB ECHO aa original sound output several urn clockwise Applies the echo times and gradually attenuated effect to the high range only Turn counterclockwise A gate effect makes the sound tighter GATE COMP Changes the texture of the overall with a reduced sense of volume sound Turn clockwise A compressor effect makes the sound fatter with an increased sense of volume White noise generated inside this unit is mixed in to the sound l Turn counterclockwise The cut of the channel via the filter and tt off frequency of the filter through a which the white noise passes e The volume can be adjusted cal decreases RIDE ey Ua E ERIMI Turn cl
12. value is displayed and flashes When in the manual input mode this displays the BPM value that was input manually This lights when Serato DJ is running and the QUANTIZE func tion can be used It also lights when playing a track that has been GRID analyzed with rekordbox and the QUANTIZE function can be used in combination with the DJ player It flashes or is off when the QUANTIZE function cannot be used 6 BPM This is always lit This displays the parameters specified for the individual effects When the BEAT 4 gt button is pressed the corresponding beat Parameter display fraction is displayed for 1 second section When a value outside the parameter range is specified with the BEAT 4 gt button the value does not change and the display flashes E ms These light according to the units for the different effects E peat display This lights according to the selected beat number position section Touch display eet his lights when the X PAD is touched section 1 Press AUTO TAP button Select the BPM measurement mode AUTO The BPM is measured automatically from the audio signal that is being input The AUTO mode is set when this unit s power is turned on TAP The BPM is input manually by tapping the TAP button with a finger e The AUTO BPM measurement range is BPM 70 to 180 With some tracks it may not be possible to measure the BPM correctly If the BPM cannot be mea sured the BPM value on the dis
13. 1 7 adha and 1 7 LFO are displayed alternately on the effect display section e Ifnecessary set the MIDI mapping for other buttons and controls Because the LFO FORM WAKE UP button s MIDI message is sent sequen tially depending on the MIDI signal reception side s settings it may not be possible to learn the MIDI message To set the MIDI mapping for other buttons and controls press the LFO FORM WAKE UP button to switch to SND RTN Using the MIDI LFO Make the preparations following the procedure at Making the preparations to use the MIDI LFO function beforehand 1 Turn the beat effect selector switch Select SND RTN MIDI LFO S Re2LFO flashes on the effect display section then SND RTN is displayed 2 Press the LFO FORM WAKE UP button Transmission of the MIDI signals begins The MIDI signal waveform pattern switches each time the LFO FORM WAKE UP button is pressed en 17 SND RTN gt 1 7 4d gt 2 7 al 3 7 ian 7 7 ain E lt 6 78_B_1 lt 5 7b__ lt 4 7 al 3 Press the BEAT lt gt button Set the MIDI signal s waveform output time 4 Press the ON OFF button of BEAT EFFECTS or touch the X PAD The MIDI message for turning the effect on is sent e When the LFO FORM WAKE UP button is pressed and a setting from 1 7 adha 7 78 is selected the MIDI message for the buttons and con trols below can be sent even when the MIDI mode is turned off
14. 2 can be used as the input e The computer s recommended operating environment depends on the DJ appli cation Be sure to check the recommended operating environment for the DJ application you are using e When another USB audio device is connected to the computer at the same time it may not operate or be recognized normally We recommend only connecting the computer and this unit e When connecting the computer and this unit we recommend connecting directly to this unit s USB port 2 Press POWER button Turn on the power of this unit e For Windows The message Installing device driver software may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer Wait a while until the message Your devices are ready for use appears e When installing on Windows XP Can Windows connect to Windows Update to search for software may appear while the installation is in progress Select No not this time then click Next to continue installation What do you want the wizard to do may appear while the instal lation is in progress Select Install the software automatically Recommended then click Next to continue installation If Windows Security appears on the screen while the installation is in progress click Install this driver software anyway and continue with the installation Operation Control Panel CD LINE PHONO
15. FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY AS IS AND WITH ALL FAULTS PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND OR INCIDENTAL DAMAGES THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING THIS WARRANTY DOES NOT COVERTHE CABINET OR ANY APPEARANCE ITEM USER ATTACHED ANTENNA ANY DAMAGETO RECORDS OR RECORDINGTAPES OR DISCS ANY DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER ACCIDENT MISUSE OR ABUSE DAMAGE DUETO LIGHTNING ORTO POWER SURGES SUBSEQUENT DAMAGE FROM LEAKING DAMAGE FROM INOPERATIVE BATTERIES ORTHE USE OF BATTERIES NOT CONFORMINGTOTHOSE SPECIFIED INTHE OWNER S MANUAL THIS WARRANTY DOES NOT COVERTHE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDERTHIS WARRANTY OBTAINED FROM ANY SOURCE OTHERTHAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION THISWARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED BYTHE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE ALTERED DEFACED OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY NO OTHER WARRANTIES PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD SOME STATES DO
16. NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE TO OBTAIN SERVICE PUSA has appointed a number of Authorized Service Companies throughout the U S A and Canada should your product require service To receive warranty service you need to present your sales receipt or if rented your rental contract showing place and date of original owner s transaction If shipping the unit you will need to package it carefully and send it transportation prepaid by a traceable insured method to an Authorized Service Company Package the product using adequate padding material to prevent damage in transit The original container is ideal for this purpose Include your name address and telephone number where you can be reached during business hours On all complaints and concerns in the U S A and Canada call Customer Support at 1 800 872 4159 For hook up and operation of your unit or to locate an Authorized Service Company please call or write CUSTOMER SUPPORT PIONEER ELECTRONICS USA INC P O BOX 1720 LONG BEACH CALIFORNIA 90801 1 800 872 4159 http www pioneerelectronics com DISPUTE RESOLUTION Following our response to any initial request to Customer Support should a
17. Post CH3 Fader Post CH4 Fader Cross Fader A Cross Fader A Cross Fader A Cross Fader A 2 2 2 Cross Fader B Cross Fader B Cross Fader B Cross Fader B E 1 C REC OUT REC OUT REC OUT REC OUT 1 The audio data is output with the same volume at which it is input to this unit regardless of the USB Output Level setting 2 When using for applications other than recording pay attention to the DJ application s set tings so that no audio loops are generated If audio loops are generated sound may be input or output at unintended volumes 3 Click the USB Output Level pull down menu Adjust the volume of the audio data output from this unit e The USB Output Level setting is applied equally to all audio data However when 1 on the table at step 2 is selected the audio data is output with the same volume at which it is input to this unit e If not enough volume can be achieved with the DJ software s volume adjustment alone change the USB Output Level setting to adjust the volume of the audio data output from this unit Note that the sound will be distorted if the volume is raised too high Copyright 2013 Pioneer Corporation Checking the latest information on the driver software For th
18. SOUND COLOR FX function These are effects that change in association with the COLOR control 1 Press one of the SOUND COLOR FX selection buttons This selects the type of effect The button that was pressed flashes e Even if one of the SOUND COLOR FX selection buttons is already selected when a different button is selected and pressed that button is selected e For the types of effects see Types of SOUND COLOR FX effects on page 19 e The same effect is set for CH1 to CH4 2 Turn the COLOR control The effect is applied to the channel s for which the control s was were pressed Canceling the SOUND COLOR FX effect Press the SOUND COLOR FX selection button that is flashing The effect is canceled Using the BEAT EFFECT function This function lets you instantaneously set various effects according to the tempo BPM Beats Per Minute of the currently playing track Main unit display Enact display The name of the selected effect is displayed section Channel select display section o The name of the channel to which the effect is applied is displayed AUTO lights when the BPM measurement mode is set to the auto AUTO TAP mode TAP lights when in the manual input mode When in the auto mode this displays the automatically detected BPM value BPM value display When the BPM cannot be detected the previously detected BPM 3 digits
19. Serato DJ Support Information is displayed 6 Click the link to the Serato DJ download page The Serato DJ download page is displayed 7 Log into your Serato com user account e f you have already registered a user account on Serato com proceed to step 8 e f you have not completed registering your user account do so following the procedure below Following the instructions on the screen input your e mail address and the password you want to set then select the region in which you live lf you check E mail me Serato newsletters newsletters providing the latest information on Serato products will be sent from Serato Once user account registration is completed you will receive an e mail at the e mail address you have input Check the contents of the e mail sent from Serato com e Be careful not to forget the e mail address and password specified when you performed user registration They will be required for updating the software e The personal information input when registering a new user account may be collected processed and used based on the privacy policy on the Serato website 8 Click the link in the e mail message sent from Serato com This takes you to the Serato DJ download page Proceed to step 9 9 Login Input the e mail address and password you have registered to log in to Serato com 10 Download the Serato DJ software from the download page Unzip the downloaded fi
20. Sets the maximum level of the sound output from the DIGITAL MASTER OUT terminals Level 10 dB 5 dB Digital asker ae DOUT FS 48 kHz 96 kHz Sets the digital signal s sampling rate Sampling Rate MASTER ATT MST ATT 6 dB 3 dB 0 dB Sets the attenuation level of the sound output from the MASTER1 and MASTER2 terminals Fe CLUB SETUP Auto Standby AUTOSTB ON OFF Turns the auto standby function on and off a MIC BTH ON OFF Sets whether or not to output the microphone s audio signals from BOOTH terminals PC UTILITY PC UTLY ON OFF Sets whether or not to launch the computer s setting utility software automatically when a USB cable is connected Peak Limiter PKLIMIT ON OFF Lessens sudden unpleasant digital clipping of the master output Factory Reset INITIAL YES NO Restores all the settings to their factory defaults About the setting utility software The setting utility can be used to make the checks and settings described below Checking the status of this unit s input selector switches Setting the audio data output from this unit to the computer Adjusting the buffer size when using Windows ASIO Checking the version of the driver software Displaying the setting utility For Windows Click Start menu gt All Programs gt Pioneer gt DJM 900SRT gt DJM 900SRT Settings Utility 24 En Note that the output sound may be distorted even if the master level
21. and supersedes all prior or contemporaneous agreements or representations whether written or oral concerning its Subject matter This Agreement may not be modified or amended without Pioneer s prior and express written consent and no other act document usage or custom will be deemed to amend or modify this Agreement fal You agree that this Agreement shall be governed and construed by and under the laws of Japan Cautions on Installation e Before installing the driver software be sure to turn off the power of this unit and disconnect the USB cable from both this unit and your computer e f you connect this unit to your computer without installing the driver soft ware first an error may occur on your computer depending on the system environment e f you have discontinued the installation process in progress step through the installation process again from the beginning according to the following procedure e Read Software end user license agreement carefully before installing this unit s proprietary driver software e Before installing the driver software terminate all other programs running on your computer e The driver software is compatible with the following OSs Supported operating systems Mac OS X 10 6 10 7 10 8 Y 32 bit version J Windows 8 Windows 8 Pro Ba Myerson 7 Windows 7 Home Premium Professional Ultimate auil wer 4 64 bit version J 2 bi ion Y Windows Vista Home Basic Home Premium Bu
22. e Rotating to the rightmost position outputs only the right sound of stereo audio Rotating to the leftmost position outputs only the left sound of stereo audio Audio is output from the BOOTH terminal Turn the BOOTH MONITOR control Adjusts the level of audio signals output from the BOOTH terminal Advanced Operations Using Serato DJ supported functions When this unit and a computer on which Serato DJ is running are connected by USB cable the functions below can be used uo1nje1ad0o QUANTIZE When tracks that have been analyzed with Serato DJ are used tracks are put on beat even if the BEAT EFFECTS ON OFF button is pressed or the X PAD is touched roughly FADER START Playback of tracks in Serato DJ can be started by operating this unit s fader Fader Start Play About PRO DJ LINK When a Pioneer DJ player supporting PRO DJ LINK e g CDJ 2000nexus CDJ 2000 CDJ 900 a computer on which rekordbox is installed and this unit are connected by LAN cable the PRO DJ LINK functions below can be used For more details on the PRO DJ LINK function also refer to the DJ player s handling instructions and rekordbox s operating instructions For instructions on connections see Connecting input terminals on page 11 e When connected using a switching hub up to 4 DJ players and 2 computers can be connected e Usea 100Base TX compatible switching hub Some switching hubs may not operate properly e Setthe D
23. hazard the power cord should also be unplugged from the AC outlet when left unused for a long period of time for example when on vacation D3 4 2 2 2a _A1_En IMPORTANT NOTICE THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE RIGHT SIDE RECORD THESE NUMBERS ON PAGE 31 FOR FUTURE REFERENCE D36 AP9 3 _A1_En WARNING Store small parts out of the reach of children and infants If accidentally swallowed contact a doctor immediately D41 6 4_A1_En WARNING Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm Wash hands after handling D36 P5_B1_En Information to User Alterations or modifications carried out without appropriate authorization may invalidate the user s right to operate the equipment D8 10 2_A1_En CAUTION This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment lo prevent electromagnetic interference with electric appliances such as radios and televisions use shielded cables and connectors for connections D8 10 3a_A1_En The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a sate level a level that lets the sound come through clearly without annoying b
24. quarter notes of the sound being played The average value of the interval at which the TAP button was tapped by finger is set as the BPM e When the BPM is set using the TAP button the beat fraction is set to 1 1 and the time of one beat quarter note is set as the effect time e The BPM can be set manually by turning the TIME control while pressing the TAP button e The BPM can be set in units of 0 1 by pressing the AUTO TAP button while pressing the TAP button and turning the TIME control while pressing the two buttons Using the external effector 1 Connect this unit and external effector For instructions on connections see Connecting output terminals on page 11 2 Turn the beat effect selector switch Select SND RTN MIDI LFO 3 Turn the effect channel selector switch This selects the channel to which the effect is applied 4 Press the ON OFF button for BEAT EFFECTS The sound that has passed through the external effector is output from the MASTER channel e When the ON OFF button is pressed again the effect turns off Operating ON OFF button status of BEAT e ES EFFECTS Release JOnffiashing Release 4 Touch Operating procedure 1 1 Perform steps 1 to 4 of the Using the BEAT EFFECT function procedure 2 Touch the X PAD The X PAD turns the effect on and off and changes the quantitative parameter e When you release your finger from the X PAD the eff
25. s waveform pattern e When MIDI LFO is selected the sound of the external effector connected to the RETURN terminal is not input 1 When CF A CF B or MASTER is selected with the effect channel selector switch if the sound of the channel you want to monitor is not being output to the MASTER channel the effect sound cannot be monitored even if the CUE button for BEAT EFFECTS is pressed 2 If the effect is off the effect sound cannot be monitored even by pressing the CUE button for BEAT EFFECTS sjoajja jo sodA MIDI assignment map MIDI assignment map e CC is the abbreviation of control change A control change is a type of MIDI signal used to transmit various types of control information such as timbre volume etc On this unit values from 0 to 127 are output as CC mainly when controls and faders are operated CC are also output when certain buttons are operated e Note is a MIDI term used when pressing or releasing notes on a piano or other keyboard Button Control Switch Category Type MIDI assignment Trigger Toggle Transmitted data DIGITAL ae Note 050 2 OFF 0 ON 127 Ge aa S piono sven fg fro Re dr CH1 CT CE COS ee MD Cota cf LOC TT OT COLOR otro __4e
26. simply by turning the knob letting you make original arrangements of tracks and enabling a wide variety of remixing possibili ties Also the BPM and beat position information of the track currently playing with Serato DJ can be obtained via USB so BEAT EFFECT can be applied on beat thanks to the highly precise BPM information Also by using the quantize mode the effect timing is automatically corrected even if the BEAT EFFECT operation is performed off timing so effects can be applied in beat DURABLE FADER The crossfader and channel faders use a sliding structure in which the fader knobs are supported by two metal shafts This provides both smooth operation with no wobbling and high durability It also keeps any adverse effects from liquids or dust getting into the faders to a minimum For scratch play compatibility the crosstader uses a uniquely developed magnetic system that provides a high durability of over 10 million operations with subtle operability The channel faders provide approximately three times greater operation durability as compared to a previous Pioneer model DJM 800 STANDARD LAYOUT This unit carries over the control panel layout of the Pioneer DJM series the world standard in DJ mixers The simple straightforward control panel layout not only facilitates DJ performances but lets even Dus using this unit for the first time to operate it without hesitation so it can be used without worry as a mixer that is permane
27. start MIDI stop signals LFO FORM WAKE UP button LFO FORM When MIDI LFO is selected at BEAT EFFECT the MIDI signal s waveform switches each time the button is pressed page 20 WAKE UP Cancels the auto standby mode Main unit display X PAD page 17 Adjusts the quantitative parameter of the BEAT EFFECT function BEAT lt gt buttons page 16 Set the beat fraction for synchronizing the effect sound TAP ENTER button TAP When the BPM measurement mode is set to TAP the BPM is input manually by tapping the button with a finger page 16 ENTER Used to change this unit s settings page 24 QUANTIZE button When the QUANTIZE function is turned on for BEAT EFFECT the effect is applied to the sound without going off tempo when the currently playing track page 15 AUTO TAP button page 16 Switches the BPM measurement mode Beat effect selector switch page 16 Switches the BEAT EFFECT effect type Effect channel selector switch page 16 Switches the channel to which the BEAT EFFECT is to be applied TIME control page 16 Adjusts the BEAT EFFECT s time parameter LEVEL DEPTH control page 16 Adjusts the BEAT EFFECT s quantitative parameter ON OFF button page 16 Turns the BEAT EFFECT function on off Do not pull on the channel fader and crossfader knobs with excessive force The knobs have a structure by which they cannot be pulled off easily Pulling the knobs strongly ma
28. the fader start function e For Serato DJ Fader Start 1 Fader Start 2 Fader Start 3 Fader Start 4 DECK C DECK A DECK B DECK D button Selects button Selects button Selects button Selects dl il dl kamal i SS jng jang 3 Set the crossfader Set to the edge opposite the side on which the channel you want to use with the fader start function is set 4 Seta cue in Serato DJ or on the DJ player The track cues to the cue point and the pause mode is set 5 Set the crossfader Playback of the track in Serato DJ or the DJ player starts e fyou set the crossfader back to the original position the player instantaneously returns to the cue point already set and pauses playback back cue Using the LINK MONITOR function e Check Use LINK MONITOR of Pioneer DJ Mixers at File gt Preferences gt Audio in rekordbox beforehand Also refer to the rekordbox operating instructions 16 En 1 Connect headphones to the PHONES terminal 2 Connect a computer on which rekordbox is installed For instructions on connections see Connecting input terminals on page 11 3 Selecting the track to be monitored with rekordbox 4 Press the CUE button for LINK The track selected with rekordbox is output from the headphones e When the CUE button is pressed again monitoring is canceled e The same operation as at Monitoring sound with headphones steps 3 to 5 can be performed Using the
29. A aa aga donne 1 set REC OUT output terminal RCA DIN JACKS yt Saute etre tbe Dah A aan aka wai apa ae abate bt DAN D AA aa ii iia 1 set SEND output terminal TS Phonejack 003 TIM rerea etes 1 set DIGITAL MASTER OUT coaxial output terminal RECAPITI KS atte wa Nan E ee ie a ds nent 1 set MIDI OUT terminal DUI LAIN anana bank T E E 1 set PHONES output terminal Stereo phone jack DD MIN aaa wa aaa Waa DANA KA ANANA ia 1 set USB terminal DEDE Min a pa Ba AI A gan aa ad a nes 1 set LINK terminal LAN terminal IDOBase TA navara isa 1 set e The specifications and design of this product are subject to change without notice e f you should require a new CONTROL CD or CONTROL VINYL due to wear breakage etc see below Note that these parts are expendables and not covered by the warranty even within the warranty period CONTROL CD See the information on the Pioneer DJ support site http pioneerdj com support CONTROL VINYL Use a shop that handles Serato DJ products or an online shop such as that of Serato http serato com uo1njewuojul Jeuonippy Pioneer PIONEER ELECTRONICS USA INC LIMITED WARRANTY WARRANTY VALID ONLY IN THE U S A AND CANADA WARRANTY Pioneer Electronics USA Inc PUSA warrants that products distributed by PUSA in the U S A and Canada that fail to function properly under normal use due to a manufacturing defect when installed and operated according to the owner s manual encl
30. BPM se this to set the effect time 0 to 4000 ms se this to set the balance between the original sound and OLL se this to set the effect time BEAT lt gt buttons parameter 1 TIME control parameter 2 LEVEL DEPTH contro param eter 3 X PAD parameter 4 clw Clec SND RTN MIDI LFO Connect an external effector etc here By pressing the LFO FORM WAKE UP button MIDI compatible software and devices can be controlled using MIDI signals SND RTN Connect an external effector etc here SEND RETURN S S 5 6 opojojojo ojo 9 o O 10 9 O amp 10101010 Es poy ololololo a O OOOO 0 0000 a Oo EE E o gt DJM 900SRT Serato DJ Edition BEAT 4 buttons parameter 1 TIME control parameter 2 LEVEL DEPTH ao e GONG parani This adjusts the sound level input to the RETURN terminal X PAD parameter 4 MIDI LFO The MIDI signal 0 127 waveform is changed according to the track s tempo The MIDI signal waveform pattern switches each time the LFO FORM WAKE UP button is pressed Use these to set a waveform output time of 1 4 64 1 with BEAT DUNONS parameter respect to one beat of the BPM TIME control parameter 2 Use this to set the waveform output time LEVEL DEPTH control param eter 3 X PAD parameter 4 This changes the MIDI signal
31. CD ROM into the computer s CD drive The CD ROM menu is displayed If the CD ROM s menu does not appear when the CD ROM is inserted perform the operations below e For Windows From the Start menu Computer or My Computer open the CD drive and double click the CD_menu exe icon e ForMac OS X In Finder double click the CD_menu app icon directly 2 When the CD ROM s menu is displayed select Serato DJ Download the Software Manual PDF file then click Start 3 An internet environment is required to access the site Connected to the internet is displayed Click Yes The web browser is launched and the Pioneer DJ support site is displayed 4 Click Software Info under DJM 900SRT on the Pioneer DJ support site Serato DJ Support Information is displayed 5 Click the link to the Serato DJ download page The Serato DJ download page is displayed http serato com 6 Log in to your Serato com user account Input the e mail address and password you have registered to log in to Serato com 7 From More Downloads on the right side of the download page click Serato DJ x x User Manual Downloading of the Serato DJ software manual starts About trademarks and registered trademarks e Pioneer and rekordbox are trademarks or registered trademarks of the PIONEER CORPORATION e Microsoft Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corpor
32. GB or more of RAM Intel processor Core 2 Duo 2 0 GHz or 32 bit version better 2 GB or more of RAM Intel processor Core 2 Duo 2 4 GHz or 64 bit version _better 4 GB or more of RAM Others USB port A USB 2 0 port is required to connect the computer with this unit Display resolution Resolution of 1 280 x 720 or greater An Internet connection is required for registering the Serato com user account and downloading the software perating systems Mac OS X 10 6 8 10 7 4 and 10 8 Windows Windows 7 Internet connection e For the latest information on the required operating environment and compatibility as well as to acquire the latest operating system refer to Software Info under DJM 900SRT on the Pioneer DJ support site below http pioneerdj com support En 7 e Operation is not guaranteed on all computers even if all the required operating environment conditions indicated here are fulfilled e Depending on the computer s power saving settings etc the CPU and hard disk may not provide sufficient processing capabilities For notebook computers in particular make sure the computer is in the proper conditions to provide constant high performance for example by keeping the AC power connected when using Serato DJ e Use of the Internet requires a separate contract with a provider offering Internet services and payment of provider fees Installation Procedure Windows
33. J player s player number to the same number as the channel to which the audio cable is connected QUANTIZE When tracks analyzed with rekordbox are used the track is put on beat even when the ON OFF button of BEAT EFFECTS is pressed or the X PAD is touched roughly FADER START Playback on the DJ player can be started by operating this unit s fader Fader Start Play LINK MONITOR With this function rekordbox music files stored on the computer can be quickly monitored over the headphones STATUS INFORMATION This function informs the DJ players of the connected channel status on air status channel number etc Using the QUANTIZE function Effects can be applied to the sound in tempo with the currently playing track based on the GRID information of tracks that have been analyzed with Serato DJ or rekordbox To use the QUANTIZE function with PRO DJ LINK connect this unit and a PRO DJ LINK compatible Pioneer DJ player beforehand For instructions on connecting see Connecting input terminals on page 11 In addition music files must have been analyzed with rekordbox beforehand in order to use the QUANTIZE function For instructions on analyzing music files with rekord box also see rekordbox s operating instructions e When using in combination with the CDJ 2000nexus first update the firmware to version 1 02 or later e o usein combination with the CDJ 2000 or CDJ 900 first update the firmware to
34. LR to RCA converter cable or con verter adapter etc may lower the sound quality and or result in noise For connection with an unbalanced input such as RCA use the MASTER2 terminals 3 Be careful not to accidentally insert the power cord of another unit to MASTER1 terminal En 11 Connecting to the control panel Be sure to connect using the Computers included USB cable Microphones CD LINE PHO DIGITAL CE TRIM OVER S 8 gt D D N e e MIC1 terminal page 15 Connects a microphone here USB terminal page 12 Connect the computer USB connection indicator Lights when signals are being exchanged with the computer PHONES terminal page 14 Connect headphones here Connecting this unit and computer For instructions on operating in combination with Serato DJ see the Quick Start Guide Serato DJ Edition For details see Downloading the latest versions of the operating instructions and the Quick Start Guide Serato DJ Edition p 28 1 Connect this unit to your computer via a USB cable This unit functions as an audio device conforming to the ASIO standards e This operation does not work with computers that do not support USB 2 0 e When using ASIO compatible applications USB 1 2 USB 3 4 USB 5 6 and USB 7 8 can be used as inputs e When using DirectX compatible applications only USB 1
35. Pioneer DJ MIXER DJM 900SRT DJM 900SRT Serato DJ Edition serato serato DJ http pioneerdj com support The Pioneer DJ support site shown above offers FAQs information on software and various other types of information and services to allow you to use your product in greater comfort http rekordbox com For various types of information and services regarding rekordbox see the Pioneer website above http serato com For the latest version of the Serato DJ software access Serato com and download the software from there Operating Instructions Thank you for buying this Pioneer product Please read through these operating instructions so you will know how to operate your model properly After you have finished read ing the instructions put them away in a safe place for future reference In some countries or regions the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings However the method of con necting and operating the unit is the same IMPORTANT The lightning flash with arrowhead symbol CAUTION within an equilateral triangle is intended to alert the user to the presence of uninsulated TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and dange
36. RETURN Digital O B1 2 Type B CH1 US CH2 USB3 4 MIS a I F u com al USB CH3 USB5 6 e A ri CH4USB7 8 an E 1USB1 2 OUT 2 USB3 4 OUT Time Code Time Code Time Code MIC CH1_Analog CH2_Analog CH3_Analog CH4_Analog RETURN CH_1_Digital USB1 2 CH_2_Digital USB3 4 CH_3_Digital USB5 6 CH_4_Digital USB7 8 SRC SRC SRC Digital MASTER PHONES MASTER USB1 2 USB3 4 USB5 6 USB7 8 Time Code LAN l FU com ETHER SW IC DIGITAL MASTER SRC DIT PHONES pac Dea MASTER 1 gt Dee Dan nal MUTE MASTER 2 gt K MUTE BOOTH DAC D D DT MUTE REC DAC D D Da MUTE SEND DAC D D DT i o SRC AMP E CHx Timecode Analog PHONO Phono Analog CD LINE Digital Trim Digital USB Z CH1 4 COMMON Level meter CHx CH Fader CF Assign MIC Output to Booth Monitor On Off SW TalkOver ON OFF Balance BEAT Master EFFECT Mono E BPM Detect Master Master Master STEREO Send Return 2posi Master Link LINK in CUE re Thru Link_CUE a ec Send out SADA Assign A a Cross Fader A gt D 7 Assign B Cross Fader B CHx MIC1 2in detect
37. X PAD Touch s Release CUE button of BEAT EFFECTS Effect channel selector switch LEVEL DEPTH control ON OFF button of BEAT EFFECTS e When the LFO FORM WAKE UP button is pressed to switch between SND RTN and MIDI LFO BEAT EFFECT automatically turns off e Itis not possible to switch between SND RTN and MIDI LFO while touching the X PAD Sending the MIDI start and MIDI stop messages Press the START STOP button for MIDI e The MIDI start and MIDI stop messages are sent alternatively each time the START STOP button is pressed regardless of whether the MIDI function is on or off Operating an external MIDI sequencer This unit outputs the operation information of buttons and controls in universal MIDI format This unit sends the tempo of the currently playing source BPM information as the MIDI timing clock This can be used to synchronize an external MIDI sequencer with the tempo of the source e Forthe messages output by this unit see M D assignment map on page 22 e External MIDI sequencers not supporting MIDI timing clocks cannot be synchronized e External MIDI sequencers cannot be synchronized for sources for which the BPM cannot be measured stably e The MIDI timing clock is output even with BPM values input manually by tapping the TAP button with a finger The MIDI timing clock output range is 40 BPM to 250 BPM 1 Connect the MIDI OUT terminal to the external MIDI
38. a ON Sasa aaa nga a ea aaa aa aa ag aaa ajak a ade gag ndan gagan ka awa a ya aja a ea ga angatag aa ank 15 05 Types of effects Types of SOUND COLOR FX effects sia a a aa aaa a nan non nora rrr ronca rra 19 reso BEAT EFFES TA T 19 06 MIDI assignment map NI DAS SI GANG TTNG eiiiai A E A A ceeds 22 07 Changing the settings About the auto standby function ns 24 About the talk over TUNIC OM idos 24 SENO STS LENGE Saranane kan aaa baka aka risa ill 24 About the setting utility SONO satan ds 24 Checking the latest information on the driver software siii eaaa anaa an eaaa 25 D additional information TUD SAO asasi aga ea TAA AE AG A ka a a AGA Na Ka ANAA Ka naga gan Gad ng aaa a Ng 26 A ed de de do oo 21 PEQUIANO me manual praia 28 About trademarks and registered trademarks sasare ena aaa eaaa aana nan 26 a A aa a aa aa POIS US apa DG a a pa ninang aaa ap aaa gana nai nag a Gan 29 4 En Before start Features This unit is a 4 channel mixer optimally designed for DJ performances using the Serato DJ DJ software by Serato It is equipped with an internal sound card that is compatible with Serato DJ so performances using Serato DJ can be held immedi ately after connecting this unit with a computer using a USB cable with no need to make any troublesome settings Furthermore Serato DJ s scratch function can be controlled using the included CONTROL VINYL record or CONTROL CD In addition this unit carries
39. am Program means all or any part of Pioneer s software licensed to You by Pioneer under this Agreement 2 PROGRAM LICENSE Limited License Subject to this Agreement s restrictions Pioneer grants to You a limited non exclusive non transferable license without the right to sublicense a Toinstall a single copy of the Program in Your computer or mobile device to use the Program only for Your personal purpose complying with this Agreement and the Documentation Authorized Use b Touse the Documentation in support of Your Authorized Use and c To make one copy of the Program solely for backup purposes provided that all titles and trademark copyright and restricted rights notices are reproduced on the copy Restrictions You will not copy or use the Program or Documentation except as expressly permitted by this Agreement You will not transfer sublicense rent lease or lend the Program or use it for third party training commercial time sharing or service bureau use You will not Yourself or through any third party modify reverse engineer disassemble or decompile the Program except to the extent expressly permitted by applicable law and then only after You have notified Pioneer in writing of Your intended activities Ownership Pioneer or its licensor retains all right title and interest in and to all patent copyright trademark trade secret and other intellectual property rights in the Program and Documentation and
40. any derivative works thereof You do not acquire any other rights express or implied beyond the limited license set forth in this Agreement No Support Pioneer has no obligation to provide support maintenance upgrades modifications or new releases for the Program or Documentation under this Agreement 3 WARRANTY DISCLAIMER THE PROGRAM AND DOCUMENTATION ARE PROVIDED AS IS WITHOUT ANY REPRESENTATIONS OR WARRANTIES AND YOU AGREE TO USE THEM AT YOUR SOLE RISK TO THE FULLEST EXTENT PERMISSIBLE BY LAW PIONEER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND DOCUMENTATION WHETHER EXPRESS IMPLIED STATUTORY OR ARISING OUT OF COURSE OF PERFORMANCE COURSE OF DEALING OR USAGE OF TRADE INCLUDING ANY WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE SATISFACTORY QUALITY ACCURACY TITLE OR NON INFRINGEMENT 4 EXPORT CONTROL AND COMPLIANCE WITH LAWS AND REGULATIONS You may not use or otherwise export or re export the Program except as authorized by United States law and the laws of the jurisdiction in which the Program was obtained In particular but without limitation the Program may not be exported or re exported a into any U S embargoed countries or b to anyone on the U S Treasury Department s Specially Designated Nationals List or the U S Department of Commerce Denied Persons List or Entity List By using the Program you repre sent and warrant that you are not located in any such
41. arts operating instructions or accessories please go to one of following URLs Pour enregistrer votre produit trouver le service apr s vente agr le plus proche et pour acheter des pieces de rechange des modes d emploi ou des accessoires reportez vous aux URL suivantes In the USA amp Canada Aux Etats Unis amp Canada http www pioneerelectronics com S018_B1_EnFr_ PSV 2013 PIONEER CORPORATION All rights reserved PIONEER CORPORATION 1 1 Shin ogura Saiwai ku Kawasaki shi Kanagawa 212 0031 Japan PIONEER ELECTRONICS USA INC P O BOX 1720 Long Beach California 90801 1720 U S A TEL 800 421 1404 K002_PSV_CU Printed in lt DRB1687 A gt
42. ation in the United States and or other countries e Apple Macintosh and Mac OS are trademarks of Apple Inc registered in the U S and other countries e ASIO is a trademark of Steinberg Media Technologies GmbH e Serato DJ Scratch Live ITCH and Serato DJ Intro are registered trademarks of Serato The names of companies and products mentioned herein are the trademarks of their respective owners Specifications General OWE TEQUITS MES tilda dd init AC 120 V 60 Hz POwer COn SUPONE 42 W Power consumption stand ld 0 4 W Main unit weight RE Te 7 1 kg 15 7 Ib Max dimensions 331 mm W x 107 9 mm H x 404 mm D 18 in W x 4 2 in H x 15 9 in D Tolerable operating temperature vo 5 C to 35 C 41 F to 95 F Tolerable operating humidity assises 5 to 85 no condensation Audio Section e aa Po PC PEN PO PO E EOI SD ran enna 96 kHz MASITERD A COR a a Tet te A Ba aaa a a EN aa treet 32 bits Other A D and D A CONVerterS cisco ai divi 24 bits Frequency characteristic CDALINIE asno AS 20 Hz to 20 kHz S N ratio rated output PHONO ata yet sro tetera ld nn ae er code Rae 88 dB CDALINE a KE NG nga a E Aga E a a 105 dB MICT MIC ia naka anaa aes a A E S 84 dB Total harmonic distortion CD LINE MASTER 0 005 Standard input level Input impedance PHONO aia na nada sen nt ahaaa ala na ga ga a aa dahana gang oe ia dag naa gagana 52 dBu 47 KQ CD LINE aan aaa
43. country or on any such list You also agree that you will not use the Program for any purposes prohibited by United States law including without limitation the development design manufac ture or production of nuclear missile or chemical or biological weapons 6 En 5 U S GOVERNMENT RESTRICTED RIGHTS The Program and Documentations are commercial computer software and com mercial computer software documentation as those terms are defined in 48 C F R 252 227 1014 a 1 2007 and 252 227 7014 a 5 2007 The U S Government s rights with respect to the Program and Documentations are limited by this license pursuant to 48 C F R 12 212 Computer software 1995 and 48 C F R 12 211 Technical data 1995 and or 48 C F R 227 7202 3 as applicable As such the Program and Documentations are being licensed to the U S Government end users a only as commercial items as that term is defined in 48 C F R 2 101 generally and as incorporated in DFAR 212 102 and b with only those limited rights as are granted to the public pursuant to this license Under no circumstance will the U S Government or its end users be granted any greater rights than we grant to other users as provided for in this license Manufacturer is Pioneer Corporation 1 1 Shin Ogura Saiwai ku Kawasaki shi Kanagawa Ken 212 0031 Japan 6 DAMAGES AND REMEDIES FOR BREACH You agree that any breach of this Agreement s restrictions w
44. crossfader Note 104 E BACK CUE 0 PLAY 127 Channel fader 4 or crossfader AA Note 105 BACK CUE 0 PLAY 127 START START A E STOP STOP A EA 1 When turning one button on switches another button from on to off MIDI on and off messages are sent from the two buttons When there is no button that switches off only the MIDI on message is sent from the button that was pressed 2 When switched from one position to another position the MIDI ON and OFF signals are sent respectively from both positions When the START STOP button is pressed for over 1 second MIDI messages corresponding to the positions of the buttons faders and controls are sent in a bundle Snapshot The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop 3 Operation differs depending on the setting of the CROSS FADER ASSIGN A THRU B selector switch When the CROSS FADER ASSIGN A THRU B selector switch is set to THRU MIDI messages are sent when the FADER START button is set to ON and the channel fader is moved away from you from the nearest position towards you and when it is moved back to the nearest position towards you When the CROSS FADER ASSIGN A THRU B selector switch is set to A MIDI messages are sent when the FADER START button is set to ON and the crossfader is moved from the far edge of the B side and when it is moved back to the far edge of the B side When the CROSS FADER ASSIGN A
45. ction can be switched on and off for all DJ players all at once For the switching procedure see Changing the settings on page 24 e The FADER START function cannot be used when attempting to perform DVS control while Serato Du is set to the Absolute mode When one of the FADER START 1 2 3 4 buttons is pressed while the Absolute mode is set that button flashes then turns off Start playback using the channel fader 1 Set the CROSS FADER ASSIGN A THRU B selector switch to THRU 2 Press one of the FADER START 1 2 3 4 buttons Select the channel to be started with the fader start function e For Serato DJ Fader Start 1 Fader Start 2 Fader Start 3 DECK C DECK A DECK BJ DECK D button Selects button Selects button Selects Fader Start 4 button Selects 3 Set the channel fader to the nearest position towards you 4 Seta cue in Serato DJ or on the DJ player The track cues to the cue point and the pause mode is set 5 Move the channel fader away from you Playback of the track in Serato DJ or the DJ player starts e f you set the channel fader back to the original position the player instanta neously returns to the cue point already set and pauses playback back cue Start playback using the crossfader 1 Set the CROSS FADER ASSIGN A THRU B selector switch to A or B 2 Press one of the FADER START 1 2 3 4 buttons Select the channel to be started with
46. dispute arise between you and Pioneer Pioneer makes available its Complaint Resolution Program to resolve the dispute The Complaint Resolution Program is available to you without charge You are required to use the Complaint Resolution Program before you exercise any rights under or seek any remedies created by Title of the Magnuson Moss Warranty Federal Trade Commission Improvement Act 15 U S C 2301 et seq To use the Complaint Resolution Program call 1 800 872 4159 and explain to the customer service representative the problem you are experiencing steps you have taken to have the product repaired during the warranty period and the name of the authorized Distributor Dealer from whom the Pioneer product was purchased After the complaint has been explained to the representative a resolution number will be issued Within 40 days of receiving your complaint Pioneer will investigate the dispute and will either 1 respond to your complaint in writing informing you what action Pioneer will take and in what time period to resolve the dispute or 2 respond to your complaint in writing informing you why it will not take any action RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE Model No Serial No Purchase Date Purchased From KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE UCP0212 uo1njewuojul Jeuonippy To register your product find the nearest authorized service location to purchase replacement p
47. e MIC1 and MIC2 channels OFF ON TALK OVER selector switch page 15 Turns the microphone on off SOUND COLOR FX buttons page 16 These turn the SOUND COLOR FX effects on off O CUE button page 14 Presses the CUE button s for the channel s you want to monitor FADER START 1 2 3 4 buttons page 16 These turn the fader start function on off El MONO SPLIT STEREO selector switch page 14 Switches how the monitor sound output from the headphones is distributed El MIXING control page 14 This adjusts the monitor volume balance of the sound of channels for which the CUE button is pressed and the sound of the MASTER channel LEVEL control page 14 Adjusts the sound level output from the headphones USB audio input indicator Lights when sound is being input from the computer to the various channels Input selector switches page 14 Selects the input source of each channel from the components connected to this unit TRIM control page 14 Adjusts the level of audio signals input in each channel EQ ISO HI MID LOW controls page 14 These adjust the sound quality of the respective channels Channel Level Indicator page 14 Displays the sound level of the respective channels before passing through the channel faders En 13 COLOR control page 16 This changes the parameters of the SOUND COLOR FX of the different channels Channel Fader page 14 Adjusts the level of audio si
48. e latest information on the driver software for exclusive use with this unit visit our website shown below http pioneerdj com support e Operation cannot be guaranteed when multiple units of this mixer are con nected to a single computer Additional information Troubleshooting e Incorrect operation is often mistaken for trouble or malfunction If you think that there is something wrong with this component check the points below Sometimes the trouble may lie in another component Inspect the other components and electrical appliances being used If the trouble cannot be rectified after checking the items below ask your nearest Pioneer authorized service center or your dealer to carry out repair work e The player may not operate properly due to static electricity or other external influences In such cases normal operation may be restored by unplugging the power cord then plugging it back in Problem The power is not turned on No sound or small sound Digital sound cannot be output Distorted sound Can t crossfade Can t fader start a DJ player BEAT EFFECTS does not work SOUND COLOR FX does not work Can t use an external effector Distorted sound from an external effector Tempo BPM cannot be measured or measurement value of tempo BPM is implausible Measured tempo BPM differs from tempo indicated on CD MIDI sequencer does not synchronize MIDI control does not work This un
49. ect multiple devices use a switching hub commercially available Use a 100Base TX compatible switching hub Some switching hubs may not operate properly 10 En BOOTH terminals page 11 These are output terminals for a booth monitor REC OUT terminals page 11 These are output terminals for recording MASTER2 terminals page 11 Connect to a power amplifier etc MASTER1 terminals page 11 Connect to a power amplifier etc Be sure to use these as balanced outputs Be careful not to accidentally insert the power cord of another unit SEND terminals page 11 Connect to the input terminal of an external effector When the L MONO channel only is connected a monaural audio signal is output I ACIN Connects to a power outlet using the included power cord Wait until all connec tions between the equipment are completed before connecting the power cord Be sure to use the included power cord WARNING The short circuit pin plugs out of the reach of children and infants If accidentally swallowed contact a doctor immediately Connecting input terminals e When creating a DVS Digital Vinyl System combining a computer audio interface etc be careful in connecting the audio interface to this unit s input terminals and in the settings of the input selector switches Also refer to the operating instructions of the DJ software and audio interface Analog player Analog player Analog player Analog play
50. ect turns off e To keep the effect on when you release your finger from the M PAD while touching the X PAD press the ON OFF button of BEAT EFFECTS then release your finger from the X PAD Operating procedure 2 1 Perform steps 1 to 5 of the Using the BEAT EFFECT function procedure 2 Touch the X PAD The X PAD changes the effect s quantitative parameter Operating DJ software using the MIDI function This unit outputs the operation information of buttons and controls in universal MIDI format When connected by USB cable to a computer on which a MIDI compatible Du soft ware program is installed the DJ software can be operated from this unit Install the DJ software on your computer in advance Also adjust the audio and MIDI settings for the DJ software e For MIDI channel setting instructions see Changing the settings on page 24 e Forthe messages output by this unit see M D assignment map on page 22 uonje1ad0o 1 Connect this unit s USB terminal to the computer For details about connections see Connecting to the control panel on page 12 2 Launch the DJ software 3 Press the ON OFF UTILITY button Turn the MIDI function on Transmission of the MIDI messages begin e When a fader or control is moved a message corresponding to the position is sent e When the START STOP button is pressed and held in for more than 2 seconds a set of MIDI messages corresponding to the button fader or co
51. efeat the safety purpose of the grounding plug D3 4 2 1 6_A1_En WARNING To prevent a fire hazard do not place any naked flame sources such as a lighted candle on the equipment D3 4 2 1 7a_A1_En VENTILATION CAUTION When installing this unit make sure to leave space around the unit for ventilation to improve heat radiation at least 5 cm at rear and 3 cm at each side WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating To prevent fire hazard the openings should never be blocked or covered with items Such as newspapers table cloths curtains or by operating the equipment on thick carpet or a bed D3 4 2 1 7b _A1_En Operating Environment Operating environment temperature and humidity 5 C to 85 C 41 F to 95 F less than 85 RH cooling vents not blocked Do not install this unit in a poorly ventilated area or in locations exposed to high humidity or direct sunlight or strong artificial light D3 4 2 1 7c _A1_En CAUTION The POWER switeh on this unit will not completely shut off all power from the AC outlet Since the power cord serves as the main disconnect device for the unit you will need to unplug it from the AC outlet to shut down all power Therefore make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident lo avoid fire
52. ency is moved fluctuates finely FLANGER A 1 cycle flanger effect is produced according to the beat fraction set with the BEAT 4 gt buttons Short delay Time I Cycle Use these to set the 1 4 64 1 effect time with respect to the time of one beat of the BPM Use this to set the cycle by which the flanger effect moves 10 to 32000 ms The further the control is turned clockwise the more the effect LEVEL DEPTH control param is stressed eter 3 When turned all the way counterclockwise only the original sound is output The cycle at which the flanger effect is moved fluctuates finely BEAT lt buttons parameter 1 TIME control parameter 2 X PAD parameter 4 PHASER The phaser effect changes according to the beat fraction set with the BEAT lt gt buttons Phase shift Time Cycle l l l l a Use these to set the cycle for moving the phaser effect as of BEAT lt gt buttons parameter 1 time of 1 4 64 1 with respect to the time of one beat of the BPM This sets the cycle by which the phaser effect is moved TIME control parameter 2 10 to 32000 ms The further the control is turned clockwise the more the effect LEVEL DEPTH control param is stressed eter 3 When turned all the way counterclockwise only the original sound is output X PAD parameter 4 The cycle at which the phaser effect is moved fluctuates finely
53. ent of the reverberation effect from 1 100 Use this to set the degree of the reverb effect TIME control parameter 2 1 100 0 LEVEL DEPTH control param Sets the balance between the original sound and the effect eter 3 sound X PAD parameter 4 Sets the filter s cut off frequency TRANS The sound is cut according to the beat fraction set with the BEAT lt gt buttons Cut Cut gt a _ _ _ C A a_ir _ a a 1 1 beat Time Use these to set a cut time of 1 16 16 1 with respect to the time of one beat of the BPM Use this to set the effect time 10 to 16000 ms LEVEL DEPTH control param Sets the balance between the original sound and the effect eter 3 sound X PAD parameter 4 This sets the cut time BEAT lt buttons parameter 1 TIME control parameter 2 FILTER The filter s cutoff frequency changes according to the beat fraction set with the BEAT lt gt buttons Frequency Use these to set the cycle for moving the cut off frequency BEAT 4 gt buttons parameter 1 as a time of 1 4 64 1 with respect to the time of one beat of the BPM Use this to set the cycle at which the cut off frequency is moved 10 to 32000 ms LEVEL DEPTH control param The further the control is turned clockwise the more the effect eter 3 is stressed En TIME control parameter 2 PAD varam terd The cycle at which the cut off frequ
54. er Microphones Digital audio output device JO O suo198uuo9 RETURN L MONO a 6 0 0 GE lt 3 D TAG D HOT 3COLD 99000 Switching hub i o Baas O86 8000 1 Computers To power outlet Pioneer DJ players 2 Pioneer DJ players 2 For details on PRO DJ LINK see About PRO DJ LINK on page 15 To use the fader start function with PRO DJ LINK connect a LAN cable page 16 N Connecting output terminals tl M Li ca cu pu 4 v CH 4 PHONO CD LINE OO 1 SIGNAL OO En CH2 PHONO CD LINE _ PHONO CD LINE OO OO SIGNAL GND OO OO CH3 PHONO CD LINE O0 RETURN 06 a To power outlet Power amplifier Power amplifier Cassette deck etc Power amplifier Digital audio External effector 1 analog input recording device or booth monitor input device MIDI sequencer 1 Also connect the external effector to the RETURN terminal input terminal 2 Be sure to use the MASTER1 terminals only for a balanced output Connection with an unbalanced input such as RCA using an X
55. es ent 3 Copying and Disposal of Sofware Yo wel mot copy ater modty mpudyos verse engres Hvene a pawaka reverse comple the Software or ny par of or y tinted mate ren or pami any other person to do so escopti Print Save Disagree Agree e lf you do not agree to the contents of the usage agreement click Disagree to cancel installation 12 If the following screen appears drag and drop the Serato DJ icon on the Applications folder icon ano jens Serato DJ items jm 918M JOS ou Bui esu Connections Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections Connect the power cord after all the connections between devices have been completed Be sure to use the included power cord Refer to the operating instructions for the component to be connected e When creating a DVS Digital Vinyl System combining a computer audio interface etc be careful in connecting the audio interface to this unit s input terminals and in the settings of the input selector switches Also refer to the operating instructions of the DJ software and audio interface Rear panel PHONO CD LINI SC SIGNAL GN ONG RETURN l L MNO NO JL OFF POV ER ON 3 COLD PHONO CD LINI SIC 6 N PHONO CD LINI PHONO CD LINE BE DE SIGNAL GND dE 96 El POWER button
56. evel Page 14 Set the CROSS FADER ASSIGN A THRU B selector switches for the different channels properly Page 14 At the USER SETUP screen set FADER START to ON page 24 Connect the DJ player to the LINK terminal properly using a LAN cable page 11 Connect this unit s audio input terminals and the DJ player s audio output terminals by audio cable page 11 Set the DJ player s player number to the same number as the channel to which the audio cable is connected Turn the effect channel selector switch to select the channel to which you want to apply the effect Turn the COLOR control clockwise or counterclockwise page 16 Press the ON OFF button for BEAT EFFECTS to set SND RTN to ON page 16 Connect the external effector to the SEND and RETURN terminals page 11 Adjust the external effector s audio output level Q Adjust the TRIM control so that the channel level indicator lights at about 0 dB at the peak level Page 14 For some tracks it may not be possible to measure the tempo BPM Use the TAP button to input the tempo manually page 16 The values may differ slightly due to the different ways in which the BPM is measured Set the MIDI sequencer s sync mode to Slave MIDI sequencers not supporting MIDI timing clocks cannot be synchronized Press the ON OFF button for MIDI page 17 To operate DJ software with this unit this uni
57. gnals output in each channel CROSS FADER ASSIGN A THRU B selector switch page 14 Sets the output destination of each channel to A or B Crossfader page 14 Outputs audio signals assigned by the crossfader assign switch correspond ing to the curve characteristics selected by CROSS FADER Crossfader Curve Selector Switch MASTER LEVEL control page 14 Adjusts the audio level output from the MASTER1 and MASTER2 terminals Master Level Indicator page 14 Displays the audio level output from the MASTER1 and MASTER2 terminals BALANCE control page 15 Adjusts the left right balance of the sound output from the MASTER1 termi nals etc MONO STEREO selector switch page 15 Switches the sound output from the MASTER1 terminals etc between mon aural and stereo BOOTH MONITOR control page 15 Adjusts the level of audio signals output from the BOOTH terminal EQ CURVE ISOLATOR EQ selector switch page 14 Switches the function of the EQ ISO HI MID LOW controls CH FADER 2 selector switch page 15 Switches the channel fader s curve characteristics CROSS FADER 7X 73 gt lt selector switch page 15 This switches the crossfader curve characteristics ON OFF UTILITY button ON OFF Turns the MIDI function on off page 17 UTILITY Displays the USER SETUP or CLUB SETUP screen page 24 START STOP button page 18 Sends the MIDI
58. gnment Trigger Toggle Transmitted data CH1 Switch CC 034 2 OFF 0 ON 127 CC 035 Booo JOFF 0 ON 127 CH3 CC 036 OFF 0 ON 127 CC 037 21 JOFF 0 0N 127 PERE RECENT MIC CC 038 OFF 0 ON 127 CC 039 E OFF 0 ON 127 CC 040 E JOFF 0 ON 12 MASTER CC 041 OFF 0 ON 127 MIDI LFO Control CC 118 o y y y oa QUANTIZE Note 118 Trigger Togge J CC 013 A EA TIME value When FLANGER PHASER TIME eh CC 045 or FILTER is selected the value is halved When a negative value is selected it is set to a positive value LEVEL DEPTH CC 091 a o jo 12 X PAD CC 116 SN ends the X PAD position information BEAT EFFECTS ON OFF X PAD touch A e When an effect other than SND RTN MIDI BURON sai OPPS SNE LFO is selected at BEAT EFFECT ON OFF X PAD touch 2 e When SND RTN MIDI LFO is selected at PULDI oupa ORFEU ONE BEAT EFFECT ie H Cota ec 030 y y i oa CC 031 o o y y y a NOISE Button CC 085 Trigger Toggle OFF 0 ON 127 SPACE CC 105 Trigger Toggle OFF 0 ON 127 GATE COMP Button CC106 Trigger Toggle OFF 0 0N 127 SOUND COLOR FX rigger Toggle DUB ECHO Button 66 107 Trigger Toggle OFF 0 ON 127 CRUSH CC 086 OFF 0 ON 127 FILTER CC 087 OFF 0 ON 127 Fader Start 1 Button CC 088 Trigger Toggle OFF 0 ON 127 ee Fader Start 2 Button CC 089 OFF 0 ON 127 Fader Start 3 CC 090 Trigger Toggle JOFF 0 ON 127 Fader Start 4 Button CC 093 OFF 0 ON 127 MIXING CC 027 o y i oa T LEVEL CC 026 Joz Fader Start operation Channel fader 3 or
59. gram price and are essential elements of the bargain between the parties without which Pioneer would not have provided the Program or entered into this Agreement The limitations or exclusions of warranties and liability contained in this Agreement do not affect or prejudice Your statutory rights as consumer and shall apply to You only to the extent such limitations or exclusions are permit ted under the laws of the jurisdiction where You are located Severability and Waiver If any provision of this Agreement is held to be illegal invalid or otherwise unenforceable that provision will be enforced to the extent possible or if incapable of enforcement deemed to be severed and deleted from this Agreement and the remainder will continue in full force and effect The waiver by either party of any default or breach of this Agreement will not waive any other or subsequent default or breach No Assignment You may not assign sell transfer delegate or otherwise dispose of this Agreement or any rights or obligations under it whether vol untarily or involuntarily by operation of law or otherwise without Pioneer s prior written consent Any purported assignment transfer or delegation by You will be null and void Subject to the foregoing this Agreement will be binding upon and will inure to the benefit of the parties and their respective successors and assigns Entire Agreement This Agreement constitutes the entire agreement between the parties
60. hen folders are not displayed after a CD ROM has been loaded 2 Double click CD_menu app 3 From the menu that appears select Install Driver Software then click Start 4 Download the latest version An internet environment is required to access the site is displayed Click Yes The web browser is launched and the Pioneer DJ support site is displayed 5 Click Software Download under DJM 900SRT on the Pioneer DJ support site 6 Click Driver Software 7 From the download page download the driver software for Mac OS DJM 900SRT_M_X X X dmg 8 Double click the downloaded file The DJM 900SRT AudioDriver menu screen appears 9 Double click DJM 900SRT_AudioDriver pkg The driver installation screen appears 918M JOS ou Bul esu 10 Check the details on the screen and click Continue Anyway 11 When the end user license agreement appears read Software end user license agreement carefully then click Continue Anyway 12 If you consent to the provisions of the Software end user license agreement click Agree If you do not consent to the provisions of the Software end user license agreement click I disagree and stop installation 13 Proceed with installation according to the instructions on the screen e Click Cancel to cancel installation after it has started e When the installation of the driver software is completed you need to reboot your computer Installing the Se
61. indicator does not light up to the very top For Mac OS X Click Macintosh HD icon gt Application gt Pioneer gt DJM 900SRT gt DJM 900SRT Settings Utility Checking the status of this unit s input selector switches Display the setting utility before starting Click the MIXER INPUT tab MIXER INPUT MIXER OUTPUT ASIO About DJ Production Software Audio Output Mixer Audio Input CHA USB1 2 P CH1 USB CHB USB3 4 P CH2 USB CHC Y USB5 6 p CH3 USB CHI USB7 8 p CH4 USB Configure the audio output settings for your DJ production software To input a USB audio signal to the mixer select USB for the desired channel input selector switch es on the mixer Setting the audio data output from this unit to the computer When Serato Du is running and using this unit as the default audio device set the audio data output in Serato Du Display the setting utility before starting 1 Click the MIXER OUTPUT tab DJ Production Software Audio Input Mixer Audio Output CHB USB3 4 Post CH2 Fader a oH Y usese lt Foncmirader H USB Output Level 19 dB Configure the audio input settings for your DJ production software 2 Click the Mixer Audio Output pull down menu Select and set the audio data to be output to the computer from the flow of audio signals inside this unit Adjusting the buffer size when using Windows ASIO If an application using this uni
62. it is not recognized after it has been connected to a computer USB indicator is off or flashing Sound of a computer cannot be output from this unit Effect sound cannot be monitored even when the CUE button for BEAT EFFECTS is pressed Sound is distorted when an analog player is connected to this unit s PHONO terminals Or lighting of the channel level indicator does not change even when the TRIM control is turned Check Is the power cord properly connected Is the input selector switch set to the proper position Are the connection cables properly connected Are the terminals and plugs dirty Is MASTER ATT set to 6 dB etc Is the digital audio output s sampling frequency fs suited for the specifications of the connected device Is the sound level output from the MASTER channel appropriately set Is the level of audio input to each channel properly set Are the CROSS FADER ASSIGN A THRU B selector switches properly set Is FADER START set to OFF Is the DJ player properly connected to the LINK terminal Are the audio Is cables properly connected he DJ player s player number properly set Is the effect channel selector switch set to the proper position Is the COLOR control set to an appropriate position Is the ON OFF button for BEAT EFFECTS set to ON ls the externa effector properly connected to the SEND or RETURN
63. laring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound so what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts ESTABLISH A SAFE LEVEL e Set your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly without distortion e Once you have established a comfortable sound level set the dial and leave it there BE SURE TO OBSERVE THE FOLLOWING GUIDELINES Do not turn up the volume so high that you can t hear what s around you e Use caution or temporarily discontinue use in potentially hazardous situations Do not use headphones while operating a motorized vehicle the use of headphones may create a traffic hazard and is illegal in many areas S001a_ A1 En POWER CORD CAUTION Handle the power cord by the plug Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock Do not place the unit a piece of furniture etc on the power cord or pinch the cord Never make a knot in the cord or tie it with other cords The power cords should be routed such that they are not likely to be stepped on A damaged power cord can cause a fire or give you an elec
64. latest version of the operating instructions this manual and the Quick Start Guide Serato DJ Edition can be downloaded from the Pioneer support site For details see Downloading the latest versions of the operating instruc tions and the Quick Start Guide Serato DJ Edition p 28 e Inthis manual names of channels and buttons indicated on the product names of menus in the software etc are indicated within square brackets e g MASTER channel ON OFF File menu e Please note that the screens and specifications of the software described in this manual as well as the external appearance and specifications of the hardware are currently under development and may differ from the final specifications e Please note that depending on the operating system version web browser set tings etc operation may differ from the procedures described in this manual D Before start SR E E T 5 Waat o LDA A E EOE ah akan SA ANO OA AAA 5 02 Installing the software Installing the driver software een 6 Installing the Serato DJ software Sinatra 7 Connections Rear DANG sk is sasae eid A o AAAA E E E E 10 COR EN nn nl one 11 Connecting Output terminals sasapan aneng aa uena e a e e 11 Connecting tothe control parne slip 12 Connecting this unit and COMPU see sand tonneau 12 D Operation Control An A 13 Basic 6 651110 sagen angan ana e Pa a AA aa ga nga Gan a gaga dies Bana kaa b naa ge be nga kan aaa 14 Advanced Ci
65. le then double click the unzipped file to launch the installer 11 Read the terms of the license agreement carefully and if you agree click Agree if you agree with the terms of this license press Agree to install the software if you do not agree press Disagree Serato_Dj_1 2 0 dmg oem reo Leo pe e License ange Sereto ino LP ato and is los me wer ad Meer be any anda Se ale od ti Ve and eletectus e Goltware eye Valeting of using the Bo ware you peer eto the te sanad pa ton Lie cen KAN taunt nt 4 Gram of Li conan Serato gante you ve peona cence rod tal and use yu jens on TX te rme o of th Sik onsa Age The Leense as pg tes to any and al Software w uthorzed sea A vee icense code win no hartas component Single i nwtance So ar my pernis u to authorze end wee Single instance on mpu Le ma tme wih thet teehee dado M you wah to a ori we use ingle ln nslance Software on another computer you rune ho garwa thors a ny pilar matahaton Where as part of the Softwere ar pq procesa software owned by thra partes Third Party Software is mstalied o ur computer the relevant third party loense egreement or terns wil apply and th sj perakan Agreement does not apply to amp 2 Ownership You an en 8 that Semio and ts censors are and remain the owners of the mtaloctu PA rro ph Software You aro granted no other ghia to the Software other than hose expmasiy confemed by the License Agr
66. locate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help D8 10 1 2_A1_En FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Product Name DJ MIXER Model Number DJM 9005RT Responsible Party Name PIONEER ELECTRONICS USA INC SERVICE SUPPORT DIVISION Address 1925 E DOMINGUEZ ST LONG BEACH CA 90810 1003 U S A Phone 1 800 421 1404 URL http www ploneerelectronics com D3 10 4 _C1_En WARNING This equipment is not waterproof To prevent a fire or shock hazard do not place any container filled with liquid near this equipment Such as a vase or flower pot or expose it to dripping splashing rain or moisture D3 4 2 1 3_A1_En WARNING This product equipped with a three wire grounding earthed plug a plug that has a third grounding pin This plug only fits a grounding type power outlet If you are unable to insert the plug into an outlet contact a licensed electrician to replace the outlet with a properly grounded one Do not d
67. ls The master level indicator lights Adjusting the sound quality 1 Switch the EQ CURVE ISOLATOR EQ selector switch ISOLATOR Functions as an isolator EQ The equalizer function is set 2 Turn the EQ ISO HI MID LOW controls for the respective channels The adjustable ranges for the respective controls are as shown below HI 26 dB to 6 dB 13 kHz MID 26 dB to 6 dB 1 kHz LOW 26 dB to 6 dB 70 Hz Monitoring sound with headphones 1 Connect headphones to the PHONES terminal 2 Press the CUE button s for the channel s you want to monitor 3 Switch the MONO SPLIT STEREO selector switch MONO SPLIT The sound of the channels for which the CUE button is pressed is output from the headphones output s left channel the MASTER channel sound is output from the right channel STEREO The sound of the channels for which the CUE button is pressed is output from the headphones in stereo 4 Turn the MIXING control This adjusts the monitor volume balance of the sound of channels for which the CUE button is pressed and the sound of the MASTER channel 5 Turn the LEVEL control for HEADPHONES The sound of the channels for which the CUE button is pressed is output from the headphones e When the CUE button is pressed again monitoring is canceled Switching the fader curve Select the channel fader curve characteristics Switch the CH FADER
68. n effect time of 1 16 16 1 with respect to BEATS AMONT 1 the time of one beat of the BPM Use this to set the effect time TIME control parameter 2 10 to 4000 ms LEVEL DEPTH control param Use this to set the balance between the original sound and eter 3 ROLL X PAD parameter 4 Use this to set the effect time The sound being input at the point when the ON OFF is pressed is recorded and the recorded sound is output repeatedly according to the beat fraction set with the BEAT lt buttons oe JP ra ea turned on 171 roh IDIA AA ass eS L Repeated c se these to set an effect time of 1 16 16 1 with respect to he time of one beat of the BPM se this to set the effect time 0 to 4000 ms se this to set the balance between the original sound and OLL se this to set the effect time BEAT lt buttons parameter 1 TIME control parameter 2 LEVEL DEPTH contro param eter 3 X PAD parameter 4 clw Clec REV ROLL The sound being input at the point when the ON OFF button is pressed is recorded and the recorded sound is reversed then output repeatedly according to the beat fraction set with the BEAT lt gt buttons wam JJJ ree Effect tu anes on y wre 11 LAREN roll Reversed and repeated se these to set an effect time of 1 16 16 1 with respect to he time of one beat of the
69. nse Agreement INSTALLER LA Grant of License Serato grants you a perpetual non exclusive personal cense License to install and use the Software on the z FL agree to the license terms and conditions Options Install Close e f you do not agree to the contents of the usage agreement click Close to cancel installation Installation begins E Serato DJ Setup jai Welcome to the Serato DJ Installer Setup Progress Processing Serato D vv INSTALLER Cancel The message of successful installation appears once installation is completed 11 Click Close to quit the Serato DJ installer if Serato DJ Setup ICI x os INSTALLER Close Installation procedure Mac OS X Do not connect this unit and the computer until installation is completed e f any other programs are running on the computer quit them 1 Insert the CD ROM into the computer s CD drive The CD ROM menu is displayed e Double click the CD icon on the desktop when folders are not displayed after a CD ROM has been loaded 2 Double click CD_menu app 3 Select Download Serato DJ Software from the CD ROM s menu then click Start 4 An internet environment is required to access the site Connected to the internet is displayed Click Yes The web browser is launched and the Pioneer DJ support site is displayed 5 Click Software Info under DJM 900SRT on the Pioneer DJ support site
70. ntly installed in the club What s in the box e CD ROM Installation Disc e USB cable e Power cord e Operating instructions this document e Serato DJ CONTROL CD x 2 e Serato DJ CONTROL VINYL x 2 JAPJS alojag Installing the software Installing the driver software This driver software is a proprietary program for inputting and outputting audio signals from the computer To use this unit connected to a computer on which a Windows or Mac OS is installed install the driver software on the computer beforehand Software end user license agreement This Software End User License Agreement Agreement is between you both the individual installing the Program and any single legal entity for which the individual is acting You or Your and PIONEER CORPORATION Pioneer TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT PERMISSION TO DOWNLOAD AND OR USE THE PROGRAM IS EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT YOU ARE NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR UNINSTALL IT AS APPLICABLE 1 DEFINITIONS Documentation means written documentation specifications and help content made generally available by Pioneer to aid in installing and using the Progr
71. ntrol positions is sent Snapshot e When the ON OFF UTILITY button is pressed again sending of the MIDI mes sages is stopped e The MIDI timing clock BPM information is sent regardless of the status of the ON OFF UTILITY button Making the preparations to use the MIDI LFO function The MIDI compatible software devices etc referred to as the MIDI signal recep tion side below must be prepared learned before using the MIDI LFO function Perform the learning operations on the MIDI signal reception side e Forthe messages output by this unit see M D assignment map on page 22 1 Press the ON OFF UTILITY button Turn the MIDI function on 2 Turn the beat effect selector switch Select SND RTN MIDI LFO S Re2LFO flashes on the effect display section then SND RTN is displayed 3 Press the ON OFF button for BEAT EFFECTS Learn the ON OFF button s MIDI message of the BEAT EFFECTS in the MIDI signal reception side e The MIDI message sent from the ON OFF button of the BEAT EFFECTS dif fers when SND RTN MIDI LFO is selected and when anything other than SND RTN MIDI LFO is selected The ON OFF button s MIDI message of BEAT EFFECTS when SND RTN MIDI LFO is selected is only sent when the operation is performed following this procedure 4 Press the LFO FORM WAKE UP button Learn the LFO FORM WAKE UP button s MIDI message in the MIDI signal recep tion side
72. ockwise The cut off fre controls for the respective quency of the filter through which channels The sound quality the white noise passes gradually can be adjusted by turning een the EQ ISO HI MID LOW controls Turn counterclockwise Increases Changes the original sound to a HIS SON bap Aa Ai CRUSH g g Turn clockwise The sound is hed lik f E crushed like sound for output crushed before passing through the high pass filter Turn counterclockwise Gradually decreases the low pass filter s Outputs sound that has passed cutoff frequency through a filter Turn clockwise Gradually ncreases the high pass filter s cutoff frequency FILTER Types of BEAT EFFECT A delay sound is output once according to the beat fraction set with the BEAT lt gt buttons When 1 2 beat delay sound is added 4 beats become 8 beats a Jaja y cred DAPP poh c se these to set a time delay of 1 8 16 1 with respect to the ime of one beat of the BPM se this to set the delay time to 4000 ms LEVEL DEPTH control param se this to set the balance between the original sound and the eter 3 elay sound X PAD parameter 4 se this to set the delay time BEAT lt buttons parameter 1 gt TIME control parameter 2 cle cla c A delay sound is output several times and gradually attenuated according to the beat fraction set with the BEAT 4 gt buttons
73. osed with the unit will be repaired or replaced with a unit of comparable value at the option of PUSA without charge to you for parts or actual repair work Parts supplied under this warranty may be new or rebuilt at the option of PUSA THIS LIMITED WARRANTY APPLIESTOTHE ORIGINAL OR ANY SUBSEQUENT OWNER OFTHIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDEDTHE PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR DEALER INTHE U S A OR CANADA YOU WILL BE REQUIRED TO PROVIDE A SALES RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR IF RENTED YOUR RENTAL CONTRACT SHOWING THE PLACE AND DATE OF FIRST RENTAL IN THE EVENT SERVICE IS REQUIRED THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD TRANSPORTATION PREPAID ONLY FROM WITHIN THE U S A AS EXPLAINED IN THIS DOCUMENT YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT PUSAWILL PAYTO RETURNTHE REPAIRED OR REPLACEMENT PRODUCTTOYOUWITHINTHE U S A PRODUCT WARRANTY PERIOD Parts Labor DJAu dio and VIGGO sisanne es de er AAA AAA AAA 1 Year 1 Year The warranty period for retail customers who rent the product commences upon the date product is first put into use a during the rental period or b retail sale whichever occurs first WHAT IS NOT COVERED IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR THERE ARE NO WARRANTIES EXPRESS OR IMPLIED INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF
74. ould cause Pioneer irreparable harm for which money damages alone would be inadequate In addition to damages and any other remedies to which Pioneer may be entitled You agree that Pioneer may seek injunctive relief to prevent the actual threatened or contin ued breach of this Agreement 7 TERMINATION Pioneer may terminate this Agreement at any time upon Your breach of any provi sion If this Agreement is terminated You will stop using the Program permanently delete it from your computer or mobile device where it resides and destroy all cop ies of the Program and Documentation in Your possession confirming to Pioneer in writing that You have done so Sections 2 2 2 3 2 4 3 4 5 6 7 and 8 will continue in effect after this Agreement s termination 8 GENERAL TERMS Limitation of Liability In no event will Pioneer or its subsidiaries be liable in connection with this Agreement or its subject matter under any theory of liability for any indirect incidental special consequential or punitive damages or damages for lost profits revenue business savings data use or cost of substitute procurement even if advised of the possibility of such damages or if such damages are foreseeable In no event will Pioneer s liability for all damages exceed the amounts actually paid by You to Pioneer or its subsidiaries for the Program The parties acknowledge that the liability limits and risk allocation in this Agreement are reflected in the Pro
75. over the main functions quality and performance of the Pioneer DJM 900nexus a standard model in clubs throughout the world offering powerful support for performances by all professional DJs active in the club scene PLUG AND PLAY This unit is equipped with a built in USB sound card for connecting a computer A computer can be connected simply using a single USB cable there is no need to procure a separate sound card in addition to this unit Also when Serato DJ is launched this unit is automatically selected as the sound device so DJ performances using Serato DJ can be held immediately with no need to make any troublesome settings Furthermore Serato DJ s scratch function can be controlled using the included CONTROL VINYL record or CONTROL CD HIGH SOUND QUALITY This unit uses a 32 bit D A converter and other parts that are equivalent to those of high grade audio equipment greatly improving the sound quality of not only the master output but also the headphones and booth output The use of a 32 bit digital signal processor suppresses digital noise Furthermore for the analog circuitry as well a high sound quality balanced hybrid operational amplifier and a fully balanced output circuitry are used to reduce noise SOUND COLOR FX amp BEAT FX This unit is equipped with the SOUND COLOR FX and BEAT FX functions that have been well received on the DJM series With SOUND COLOR FX the effects you are aiming to create can be applied
76. page 14 Turns this unit s power on and off RETURN terminals page 11 Connect to the output terminal of an external effector When the L MONO channel only is connected the L MONO channel input is simultaneously input to the R channel PHONO terminals page 11 Connect to a phono level MM cartridge output device Do not input line level signals To connect a device to the PHONO terminals remove the short circuit pin plug inserted in the terminals Insert this short circuit pin plug into the PHONO terminals when nothing is connected to them to cut external noise CD LINE terminals page 11 Connect to a DJ player or a line level output component SIGNAL GND terminal page 11 Connects an analog player s ground wire here This helps reduce noise when the analog player is connected O MIC2 terminal page 11 Connects a microphone here MIDI OUT terminal page 11 Connects this to the MIDI IN terminal on an external MIDI sequencer El Kensington security slot El DIGITAL IN terminal page 11 Connect these to the digital coaxial output terminals on DJ players etc The sound may be momentarily interrupted when the output signal sampling fre quency is switched DIGITAL MASTER OUT terminal page 11 Outputs the master channel audio signals LINK terminal page 11 Connect these to the LINK terminals on Pioneer DJ players or the LAN ports of computers on which rekordbox is installed PRO DJ LINK To conn
77. play flashes In such cases use the TAP button to input the BPM manually 2 Turn the beat effect selector switch This selects the type of effect e For the types of effects see Types of BEAT EFFECT on page 19 e To use SND RTN see Using the external effector below e To use MIDI LFO see Using the MIDI LFO on page 17 3 Turn the effect channel selector switch This selects the channel to which the effect is applied 1 4 The effect is applied to the sound of the respective channel MIC The effect is applied to the sound of MIC channel CF A CF B The effect is applied to the sound of the crossfader s A left or B right side MASTER The effect is applied to the sound of the MASTER channel e This operation is not necessary when MIDI LFO is selected 4 Press the BEAT lt gt button Set the beat fraction for synchronizing the effect sound The effect time corresponding to the beat fraction is set automatically 5 Press the ON OFF button for BEAT EFFECTS The effect is applied to the sound The effect s time parameter can be adjusted by turning the TIME control The effect s quantitative parameter can be adjusted by turning the LEVEL DEPTH control The ON OFF button flashes when the effect is on e When the ON OFF button is pressed again the effect turns off Inputting the BPM manually Tap the TAP button at least 2 times in rhythm with the beat in
78. rato DJ software Serato DJ is a DJ software application by Serato DJ performances are possible by connecting the computer on which this software is installed to this unit See the Quick Start Guide Serato DJ Edition for the procedure for making the initial settings required to use the CONTROL CD or CONTROL VINYL included with this unit in order to operate Serato DJ The Quick Start Guide Serato DJ Edition can be downloaded from the Pioneer DJ support site http pioneerdj com sup port For downloading instructions see Downloading the latest versions of the operating instructions and the Quick Start Guide Serato DJ Edition in this manual p 28 For the latest version of the Serato DJ software access Serato com and download the software from there A software download link is also provided on the included CD ROM Please note that the software screens and specifications used for explanations in this manual are under development and may differ from the final specifications For instructions on operating the Serato DJ software see the Serato DJ software s manual e The Serato DJ software s manual can be downloaded from Serato com For details see Downloading the Serato DJ software manual p 28 Minimum operating environment CPU and required memor Intel processor Core 2 Duo 2 0 GHz or 32 bit version _better 1 GB or more of RAM Intel processor Core 2 Duo 2 4 GHz or 64 bit version _better 4
79. rous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons SERVICE PERSONNEL BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED maintenance servicing instructions in the literature accompanying the appliance D3 4 2 1 1_A1_En IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet So eS La 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to
80. s on page 24 3 Turn the MIC1 LEVEL or MIC2 LEVEL control Adjust the level of the sound output from the MIC channel e Pay attention that rotating to the extreme right position outputs a very loud sound 4 Input audio signals to the microphone Adjusting the sound quality Turn the MIC channels EQ HI LOW controls The adjustable ranges for the respective controls are as shown below HI 12dB to 12 dB 10 kHz LOW 12 dB to 12 dB 100 Hz Switching between monaural and stereo audio This switches the sound output from the MASTER1 MASTER2 BOOTH REC OUT PHONES DIGITAL MASTER OUT and USB terminals between monaural and stereo e To adjust the sound output from the USB terminals select REC OUT at Mixer Audio Output in the setting utility Switch the MONO STEREO selector switch MONO Outputs monaural audio STEREO Outputs stereo audio Adjusting the L R balance of audio The left right balance of the sound output from the MASTER1 MASTER2 BOOTH REC OUT PHONES DIGITAL MASTER OUT and USB terminals can be adjusted e To adjust the sound output from the USB terminals select REC OUT at Mixer Audio Output in the setting utility 1 Set the MONO STEREO selector switch to STEREO 2 Turn the BALANCE control The sound s left right balance changes according to the direction in which the BALANCE control is turned and its position
81. siness Ultimate 2 elt ESC 64 bit version J Windows XP Home Edition Professional SP3 or later 32 bit version J Windows XP Professional x64 Edition is not supported e The included CD ROM includes installation programs in the following 12 languages English French German Italian Dutch Spanish Portuguese Russian Simplified Chinese Traditional Chinese Korean and Japanese When using operating systems in other languages follow the instructions on the screen to select English English Installation Procedure Windows Read Cautions on Installation carefully before installing the driver software e To install or uninstall the driver software you need to be authorized by the administrator of your computer Log on as the administrator of your computer before proceeding with the installation 1 Insert the included CD ROM into the computer s CD drive The CD ROM menu is displayed e fthe CD ROM menu does not appear when the CD ROM is inserted double click the CD drive from the Start menu Computer or My Computer 2 From the menu that appears select Install Driver Software then click Start 3 Download the latest version An internet environment is required to access the site is displayed Click Yes The web browser is launched and the Pioneer Du support site is displayed 4 Click Software Download under DJM 900SRT on the Pioneer DJ support site 5 Click Driver Soft
82. t s MIDI messages must be assigned to the DJ software you are using For instructions on assigning messages see your DJ software s operating instructions Install the driver software If it is already installed reinstall it page 6 Connect this unit and the computer directly using the included USB cable page 12 Select this unit with the audio output device settings For instructions on making settings for your application see your application s operating instructions Set the input selector switch to the USB position Page 14 The circuit that generates the echo for the ECHO REVERB ROLL SLIP ROLL and REV ROLL effect sounds is positioned after the effect circuit so the effect sound cannot be monitored This is not a malfunction Connect the analog player with built in phono equalizer to the CD LINE terminals page 11 If the analog player with built in phono equalizer has a PHONO LINE selector switch switch it to PHONO If the output of the audio interface for computers is line level connect it to the CD LINE terminals page 11 If the analog player has a PHONO LINE selector switch switch it to PHONO Block Diagram MIC1 LEVEL MIC2 LEVEL CH1 DIGITAL CD LINE TRIM gt PHONO o Time Code D CD LINE TRIM OA gt gt PHONO CH2 DIGITAL CH3 Time Code DIGITAL CD LINE PHONO Y E CH4 DIGITAL P et
83. t as the default audio device DJ software etc is run ning quit that application before adjusting the buffer size Display the setting utility before starting Click the ASIO tab Sets the size of the buffer when using ASIO If you make the buffer smaller or select a high sampling rate with the DJ software then latency Audio output delay will be shorter If the audio gets cut off increase the size of the buffer or reduce the sampling rate with the DJ software so that the sound does not get cut off Sampling Rate e fthe buffer size is made large drops in audio data breaks in the sound occur less easily but the time lag due to the delay in the transfer of the audio data latency increases Checking the version of the driver software Display the setting utility before starting Click the About tab MIXER INPUT_ Mixer OUTPUT ASIO ds DJM 900SRT Setting Utility sBuiyes ay Buibueyy Utility Version 1 000 Driver Version 1 000 DLL Version 1 000 CH1 Timecode PHONO 1 CH2 Timecode PHONO 1 CH3 Timecode PHONO CH4 Timecode PHONO 1 CH1 Timecode CD CH2 Timecode CD CH3 Timecode CD CH4 Timecode CD LIN LINE LINE LINE 1 CH1 Timecode CH2 Timecode CH3 Timecode CH4 Timecode DIGITAL DIGITAL DIGITAL DIGITAL Post CH1 Fader Post CH2 Fader
84. t no audio signals of 10 dB or greater are input to this unit s input terminals That no PRO Du LINK connections are made When the LFO FORM WAKE UP button is pressed the standby mode is canceled This unit is shipped with the auto standby function turned on If you do not want to use the auto standby function set Auto Standby to OFF About the talk over function The talk over function has the two modes described below ADV advanced talk over The mid range only of the sound of channels other than the MIC channel is attenuated according to the Talk Over LEVEL setting value and output dB Frequency NOR normal talk over The sound of channels other than the MIC channel is attenuated according to the Talk Over LEVEL setting value and output Frequency Setting preferences Setting upon purchase tions settings Setting value Screen disp Descriptions Fader Start F S ON OFF Turns the Fader Start function on and off all at once MIDI CH MIDI CH 1 to 16 Sets the MIDI channel USER SETUP MIDI Button Type MIDI BT TGL TRG Selects the MIDI signal transmission mode TGL TOGGLE or TRG TRIGGER Talk Over Mode TLK MOD ADV NOR Selects the talk over function s mode ADV ADVANCED or NOR NORMAL 6 dB 12 dB E S Talk Over LEVEL TLK LVL _18 dB 24 dB Sets the talk over function s sound attenuation level Digital Master out oriy IRAR ace
85. terminal Is the externa appropriate le Is the audio in Is the MIDI se Does the MID effector s audio output level set to an vel put level too high or too low quencer s sync mode set to Slave sequencer you are using support MIDI timing clocks Is the MIDI ch annel turned on Are the MIDI settings properly set Is the driver software properly installed on your computer Are this unit and computer properly connected Are the audio output device settings properly set Is the input selector switch set to the proper position Have you connected an analog player with a built in phono equalizer Is an audio interface for computers connected between the analog player and this unit Remedy Plug in the power cord to an AC outlet Switch the input selector switch to switch the channel s input source page 14 Connect the connection cables properly page 11 Clean the terminals and plugs before making connections At the USER SETUP screen switch MASTER ATT page 24 On the CLUB SETUP screen set Digital Master Out Sampling Rate according to the specifications of the connected equipment page 24 Adjust the MASTER LEVEL control so that the master channel level indicator lights at around 0 dB at the peak level Page 14 Set MASTER ATT to 3 dB or 6 dB page 24 Adjust the TRIM control so that the channel level indicator lights at about 0 dB at the peak l
86. ters newsletters providing the latest information on Serato products will be sent from Serato Once user account registration is completed you will receive an e mail at the e mail address you have input Check the contents of the e mail sent from Serato com e Becareful not to forget the e mail address and password specified when you performed user registration They will be required for updating the software e The personal information input when registering a new user account may be collected processed and used based on the privacy policy on the Serato website 7 Click the link in the e mail message sent from Serato com This takes you to the Serato DJ download page Proceed to step 9 8 Log in Input the e mail address and password you have registered to log in to Serato com 9 Download the Serato DJ software from the download page Unzip the downloaded file then double click the unzipped file to launch the installer 10 Read the terms of the license agreement carefully and if you agree select I agree to the license terms and conditions then click Install fg Serato DJ Setup F x Welcome to the Serato DJ Installer SERATO USER LICENSE AGREEMENT License Agreement DJ Serato inc LP Serato and its hcensor s own the Sofware being any and all Serato applications and intellectual property in the Sofware By installing or using the Software you agree to the terms of this Lice
87. trical shock Check the power cord once in a while When you find it damaged ask your nearest PIONEER authorized service center or your dealer for a replacement 002 _A1_En Contents For those operating Serato DJ for the first time using this unit and its accessories See the Quick Start Guide Serato DJ Edition for the procedure for making the initial settings required to use the CONTROL CD or CONTROL VINYL included with this unit in order to operate Serato DJ The Quick Start Guide Serato DJ Edition can be downloaded from the Pioneer DJ support site http pioneerdj com sup port For downloading instructions see Downloading the latest versions of the operating instructions and the Quick Start Guide Serato DJ Edition in this manual p 28 How to read this manual Be sure to read both this manual and the Quick Start Guide Serato DJ Edition Both contain important information that you should understand before using this product For instructions on obtaining the Serato DJ software s manual see Acquiring the manual p 28 This manual consists mainly of descriptions of the functions of this unit as hard ware For details about operating the Serato DJ software see the Serato DJ soft ware s manual and the Quick Start Guide Serato DJ Edition e The Serato DJ software manual can be downloaded from Serato com For details see Downloading the Serato DJ software manual p 28 The
88. v z selector switch 7 The curve rises suddenly at the back side 7 curve between the ones above and below is set A The curve rises gradually the sound gradually increases as the chan nel fader is moved away from the front side Select the crossfader curve characteristics Switch the CROSS FADER 7X 73 gt O selector switch ZN Makes a sharply increasing curve if the crossfader is moved away trom the A side audio signals are immediately output from the B side AN Makes a curve shaped between the two curves above and below DX Makes a gradually increasing curve if the crossfader is moved away from the A side the sound on the B side gradually increases while the sound on the A gradually decreases Using a microphone 1 Connect a microphone to the MIC1 or MIC2 terminal 2 Set the OFF ON TALK OVER selector switch to ON or TALK OVER ON The indicator lights TALK OVER The indicator flashes e When set to TALK OVER the sound of channels other than the MIC channel is attenuated by 18 dB default when a sound of 10 dB or greater is input to the microphone e The TALK OVER sound attenuation level can be changed at USER SETUP For instructions on changing this see Changing the settings on page 24 e The talk over mode can be switched to the normal mode or the advanced mode For instructions on changing it see Changing the setting
89. version 4 0 or later 1 Press the QUANTIZE button The QUANTIZE function turns on GRID lights on this unit s main unit display when the GRID information has been properly received from Serato DJ orthe DJ player and the QUANTIZE function can be used GRID flashes if the GRID information has not been properly received En 15 e Depending on the playing status of Serato DJ or the DJ player off air scratch ing playing in reverse etc it may not be possible to receive the GRID information 2 Press the ON OFF button of BEAT EFFECTS or touch the X PAD The effect is added to the sound in tempo with the track being played e When the QUANTIZE button is pressed again the QUANTIZE function turns off Using the FADER START function When this unit and a computer on which Serato Du is running are connected by USB cable such operations as starting playback of tracks in Serato DJ can be con trolled using this unit s fader Connect this unit and a computer on which Serato Du is running beforehand In the same way when this unit and a Pioneer DJ player are connected by LAN cable such operations as starting playback of the DJ player can be controlled using this unit s fader Connect the Pioneer DJ player and this unit beforehand For instructions on con necting see Connecting input terminals on page 11 For instructions on setting the player numbers of Pioneer DJ players see About PRO DJ LINK on page 15 The fader start fun
90. ware 6 From the download page download the driver software for Windows DJM 900SRT_X XXX exe 7 Double click the downloaded file The driver installation screen appears 8 Carefully read the Software end user license agreement and if you consent to the provisions put a check mark in I agree and click OK If you do not consent to the provisions of the Software end user license agreement click Cancel and stop installation 9 Proceed with installation according to the instructions on the screen If Windows Security appears on the screen while the installation is in progress click Install this driver software anyway and continue with the installation e When installing on Windows XP If Hardware Installation appears on the screen while the installation is in progress click Continue Anyway and continue with the installation e When the installation program is completed a completion message appears e Once installation of the driver software is completed restart the computer Installation procedure Mac OS X Read Cautions on Installation carefully before installing the driver software e To install or uninstall the driver software you need to be authorized by the administrator of your computer Have the name and password of the administra tor of your computer ready in advance 1 Insert the included CD ROM into the computer s CD drive The CD ROM folder appears e Double click the CD icon on the desktop w
91. y result in damaging the unit Basic Operation Outputting sound 1 Press POWER button Turn on the power of this unit 2 Switch the input selector switches Selects the input sources for the different channels from among the devices con nected to this unit DIGITAL Selects the DJ player connected to the DIGITAL terminals PHONO Selects the analog player connected to the PHONO terminals CD LINE Selects the cassette deck or CD player connected to the CD LINE terminals USB Selects the sound of the computer connected to the USB port 3 Turn the TRIM control Adjusts the level of audio signals input in each channel The corresponding channel level indicator lights when audio signals are being properly input to that channel 4 Move the channel fader away from you Adjusts the level of audio signals output in each channel 5 Switch the CROSS FADER ASSIGN A THRU B selector switch Switches the output destination of each channel A Assigns to A left of the crossfader B Assigns to B right of the crossfader THRU Selects this when you do not want to use the crossfader The sig nals do not pass through the crossfader 6 Set the crossfader This operation is not necessary when the CROSS FADER ASSIGN A THRU B selector switch is set to THRU 7 Turn the MASTER LEVEL control Audio signals are output from the MASTER1 and MASTER2 termina

DJM-900SRT

Contents

Download Pdf Manuals

Related Search

Related Contents