Platinum Profile LED User Manual ver 1
Contents
1. ET ATION PLATINUM PROFILE LED User manual jonubuijesn aa1a14034 wnNu via NOILV 13 www elationlighting com 02015 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade2. which the fixture operates damp smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture s optics Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended to insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections A detailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good condition and prevent overheating Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall e Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s Electric power supply cables must not show any damage material fatigue or sediments Never remove the
3. 75 89 Blade Macro 5 90 104 Blade Macro 6 22 24 34 105 119 Blade Macro 7 120 134 Blade Macro 8 135 149 Blade Macro 9 150 164 Blade Macro 10 165 179 Blade Macro 11 180 194 Blade Macro 12 195 209 Blade Macro 13 210 224 Blade Macro 14 225 239 Blade Macro 15 240 255 Blade Macro 16 0 225 MAX to MIN Speed 23 25 35 226 235 Blackout by Movement 236 245 Blackout by ALL Wheel Changing 246 255 O Function 0 19 Color Change Normal 20 29 Color Change to Any Position 30 39 Color amp Gobo Change to Any Position 40 59 ALL Motors Reset 60 79 IRIS Reset 80 84 FROST Reset 85 87 SCAN Motor Reset 88 90 COLOR Motors Reset 91 93 GOBO Motors Reset 24 26 36 94 96 ALL BLADE Motors Reset 97 99 FOCUS Motor Reset 100 119 OTHER Motors Reset 120 139 Internal Program 1 Scene1 8 140 159 Internal Program 2 Scene 9 16 160 179 Internal Program 3 Scene 17 24 180 199 Internal Program 4 Scene 25 32 200 219 Internal Program 5 Scene 33 40 220 239 Internal Program 6 Scene 41 48 240 255 Internal Program 7 Scene 49 56 33 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com ERROR CODES When power is applied the unit will automatically enter a Reset Test mode This mode brings all the internal motors to a home position If there is an internal problem with one or more of the motors an error code will flash in the display in the form of XXer were as XX will represent a function number
4. Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION eS Please check www elationlighting com for the latest revision update of this manual Document Software DMX Version Version channel Modes Notes 5 2015 1 gt 1 0 4 24 26 36 Updated manual format 2 PLATINUM PROFILE LED User Manual 1 www elationlighting com CONTENTS General Information 4 Warranty Safety Instructions 7 General Guidelines 8 Fixture Overview 9 Fixture Installation 10 Understanding DMX 13 Fixture Menu 17 DMX Channel Functions And Values 29 Error Codes 34 Cleaning and Maintenance 37 Technical Specifications 38 Optional Accessories 41 3 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today The PLATINUM PROFILE LED has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the PLATINUM PROFILE LED by Elation Professionale Eve
5. The PAN movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit PAN Er malfunctions sensor failed or magnet is missing or there is a motor failure defective motor or a defective motor IC drive on the main PCB This error may also be displayed if tne head yoke was blocked during a reset function The TILT movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit TILT Er malfunctions sensor failed or magnet is missing or there is a motor failure defective motor or defective motor IC drive on main PCB This error may also be displayed if the head was blocked during a reset function The Color Wheel 1 is not located in the default position after the reset This message will appear after the reset of the fixture reset if the Color Wheel 1 Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Color Wheel 2 is not located in the default position after the reset This message will appear after the reset of the fixture reset if the Color Wheel 2 Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Gobo Whee
6. 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be Clearly written on the outside of the retum package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer support IMPORTANT NOTICE TS There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 PLATINUM PROFILE LED User Manual Ver 1 EtATION www elationlighting com eec 9 9 LIMITED WARRANTY A Elation Professional amp hereby warrants to the original purchaser Elation Professional amp products to be free of manufacturing defects in material and workm
7. Pos 4 Pos 5 Pos 6 INTERCHANGEABLE ROTATING WHEEL I OD 24 8mm 08068 A ID 16 5mm 10 16 5mm 10 16 5mm 10 16 5mm ID 16 5mm ID n a 10 16 5mm Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos Pos 7 ve STAMPED GOBO WHEEL 2 ID 16 5mm ID 16 5mm ID 16 5mm 10 16 5mm 10 2 16 5mm ID 16 5mm 10 16 5 Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 Pos 7 IMPORTANT NOTICE REGARDING DIMENSIONS AND CUSTOM GOBOS OD Outside Diameter ID Image Diameter Due to varying manufacturing processes it is highly recommended to provide a gobo and holder sample from the fixture to 3rd party custom gobo vendors for accurate sizing Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 39 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com PHOTOMETRIC DATA 18 Beam 2 5m 5m 7 5m m ft m ft m ft Distance 2 5 8 2 5 16 4 7 5 24 6 Photometrics lux fc lux fc lux fc DIMENSIONAL DRAWINGS gt E N 7 EN S a 8 z mr Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 40 PLATINUM PROFILE LED User Manual Ver I www elationlighting com OPTIONAL ACCESSORIES ORDER CODE ITEM TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp
8. SCxxx Save and Exit Pan Tilt Save and Automatically Return Sepe 00 Fade Time Edit Scenes Manual Scenes Edit Scene Time Scene 250 Input By Outside Stores Scenes via Ext DMX Console Rec Controller XX XX Automatic Scenes Recorder FUNCTION DMX Address Define desired DMX adaress via the Control Panel FUNCTION DMX Value Display DMX 512 value of each channel FUNCTION Slave Mode Define fixture slave mode Slavel Slave2 Slave3 19 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com FUNCTION Auto Program Define fixture mode Master or Alone for running Auto Programs Select desired internal programs under Select Program set the number of steps under Edit Program and edit individual scenes under Edit Scenes FUNCTION Sound Control Define fixture mode Master or Alone for running Auto Programs via sound activation default is Master INFORMATION Time Information Current Time Displays fixture run time from last power ON The counter is reset after each time the fixture is powered OFF INFORMATION Time Information Total Run Time Displays fixture total run time INFORMATION Time Information Last Run Time Displays fixture run time for a given period of time i e rental period This counter can be reset INFORMATION Time Information LastRun Password Display the fixture timer password 038 INFORMATION Time Informatio
9. ground prong from the power cable 37 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com eec 9 9 TECHNICAL SPECIFICATIONS SOURCE 180W LED Engine 20 000 Hour Average LED Life PHOTOMETRIC DATA 9 000 Total Lumens 6 500K gt 85CRI EFFECTS 4 Rotating Framing Shutters and Macros 3 Facet Rotating Prism and Frost Filter Electronic Dimming amp Strobe Motorized Focus amp Mechanical Iris CONTROL CONNECTIONS 3 DMX Channel Modes 24 26 36 RDM Remote Device Management 6 Button Touch Control Panel Full Color 180 Reversible LCD Menu Display 8 16 Bit Resolution Adjustable Movement 5pin DMX In Out RJ45 Ethernet In Out Art NET powerCON Power In Out SIZE WEIGHT Length 14 2 360mm Width 16 0 408mm Vertical Height 25 0 636mm Weight 57 0 Ibs 26 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 250W Max Power Consumption 13 F to 113 F 25 C to 45 C APPROVALS RATINGS CE IP20 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 38 PLATINUM PROFILE LED User Manual Ver 1 Eratiow www elationlighting com eec 9 9 COLORS amp GOBOS Not To Scale For Illustrations Purposes Only Subject To Change Without Notice COLOR WHEEL 1 DARK RED AGUA UVFILTER PINK Pos 1 Pos 2 Pos 3 Pos 4 pes COLOR WHEEL 2 GREEN BLUE YELLOW MAGENTA C T O 1 Pos 2 Pos 3
10. that integrates the bottom of the base the included Omega Brackets x2 and safety cable rigging point in one unit see the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamps to the included omega brackets using a M10 screw fitted through the center hole of the Omega Bracket Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point integrated in the base assembly had 1 Omega holders E 2 Clamp 3 Safety rope 4 Quick lock fastener SECURING Regardless of the rigging option you choose for your PLATINUM PROFILE LED always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 12 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to the f
11. 192 199 Prism Gobo Macro 9 200 207 Prism Gobo Macro 10 208 215 Prism Gobo Macro 11 216 223 Prism Gobo Macro 12 224 231 Prism Gobo Macro 13 232 239 Prism Gobo Macro 14 240 247 Prism Gobo Macro 15 248 255 Prism Gobo Macro 16 0 127 Prism Indexing 9 11 14 128 189 Clockwise Linear Prism Rotation from FAST to SLOW 190 193 NO Rotation 194 255 Counterclockwise Linear Prism Rotation from SLOW to FAST 0 255 Continuous Adjustment from FAR to NEAR 18 0 255 Continuous FINE Focus Adjustment 0 31 Shutter CLOSED 32 63 O Function Shutter OPEN 64 95 Strobe Effect SLOW to FAST 11 13 17 96 127 O function Shutter OPEN 128 159 Pulse Effect In Sequences 160 191 O Function Shutter OPEN 192 223 Random Strobe Effect SLOW to FAST 224 255 O Function Shutter OPEN 0 255 Intensity 0 to 100 0 20 STANDARD 21 40 STAGE 13 15 19 41 60 TV 61 80 ARCHITECTURAL 81 100 THRATRE 101 255 DEFAULT to UNIT CURVE SETTING 31 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com ELATIONO PLATINUM PROFILE LED DMX Channel Values Functions Version I 36 DMX Channels Specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO PRISM and BLADE effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTE
12. ATINUM PROFILE LED User Manual Ver 1 www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the PLATINUM PROFILE LED when in the 36 Channel Extended Mode you should set the starting DMX address of the first unit to 1 the second unit to 37 1 36 the third unit to 73 37 36 and so on Note During start up the PLATINUM PROFILE LED will automatically detect w
13. DRC35TOUR Road Case For Platinum PROFILE 35 PRO EWDMXSYSTEM Wireless DMX System 1 Transmitter I Receiver AC5PDMX5PRO 5 ft 1 5m 5pin PRO DMX Cable PLC3 3 ft Im PowerCON PRO Link Cable CAT6PRO5 5 ft 1 5m Spin PRO DMX Cable Additional Cable Lengths Available 41 PLATINUM PROFILE LED User Manual Ver 1
14. For example when the display shows OEr it means there is some type of error with the Pan motor If there are multiple errors during the start up process they will all flash in the display For example if the fixtures has errors on Channel 1 2 and 5 all at the same time you will see the error message O2Er and O5Er flash repeated 5 times If an error does occur during the initial start up procedure the fixture will self generate a second reset signal and try to realign all the motors and correct the errors If the error persists after a second attempt a third attempt will be made If after a third attempt all the errors have not been corrected the fixture will make the following determinations 3 or More Errors The fixture cannot function properly with three or more errors therefore the fixture will place itself in a stand by mode until subsequent repairs can be made Less Than 3 Errors The fixture has less than 3 errors therefore most other functions will work properly The fixture will attempt to operate normally until the errors can be correct by a technician The errors in question will remain flashing in the display as a reminder of internal errors 34 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting m ELATIOS elatio g g co ELATIONO PLATINUM PROFILE LED ERROR CODES Specifications and features are subject to change without any prior written notice ERROR CODE DESCRIPTION
15. Info Head Temperature XXX C F Temperature in Fixture Head XXX XXX XXX XXX Ethernet IP XXX XXX XXX XXX XXX IP Address Software Version V1 0 4 Software Version Error Info Error Record 1 Error Record 10 Pan Address via DMX ON OFF Address Via DMX No DMX Status Close Hold Auto Music Auto Run If No DMX Pan Invert ON OFF Pan Reverse Movement Status Settings Tilt Invert ON OFF Tilt Reverse Movement Pan Degree 630 540 Pan Degree Select Feedback ON OFF Movement Feedback Movement Speed Speed 1 4 Movement Mode Select Hibernation OFF 01M 99M 15M Stand By Mode Password Password XXX Service Password 050 RDM PID XXXXX RDM PID Code Service Setting Ethernet IP XXX XXX XXX Ethernet IP Ether Mask IP XXX XXX XXX Ethernet Mask PERSONALITY Clear Err Info ON OFF Clear Error Info Fans Control Auto High Low Set Fan Speed Shutoff Time 02 60m 05m Display Shut Off Time Display Setting Display Reverse ON OFF Display Reverse 1809 Key Lock ON OFF Key Lock Temperature C F Celsius Fahrenheit Temperature Switch Between F Initial Status PAN XXX Initial Effect Position DMX Only DMX Only Select Signal Art Net on IP2 Elect Art Net IPO2 Art Net on IP10 Elect Art Net IPO10 Set Universe 000 255 Set Art Net Universe Dimmer Mode Standard Stage TV Architectural Theatre Set Dimmer Mode Reset Default ON OFF Password 011 Restore Factory Settings 18 PLATINUM PROFILE LED Us
16. ND FROST 14 16 20 0 127 OPEN 128 255 100 Frost IRIS 15 17 21 0 191 MAX to MIN Diameter 192 223 Pulse Closing FAST to SLOW 224 255 Pulse Closing SLOW to FAST 22 IRIS FINE 0 255 Iris FINE Adjustment BLADE 1 16 18 23 0 255 OPEN to CLOSE 24 n 0 255 OPEN to CLOSE FINE Adjustment BLADE 2 17 19 25 0 255 OPEN to CLOSE 26 BLADE 2 FINE 0 255 OPEN to CLOSE FINE Adjustment BLADE 3 18 20 27 0 255 OPEN to CLOSE 28 BLADE 3 FINE 0 255 OPEN to CLOSE FINE Adjustment BLADE 4 19 21 29 0 255 OPEN to CLOSE BLAD Hu 30 i 0 255 OPEN to CLOSE FINE Adjustment ALL 4 BLADES ROTATION 20 22 31 5 0 255 4 Blade Rotation 39 ALL 4 BLADES FINE ROTATION 0 255 All 4 Blade FINE Rotation BLADE SPEED 21 23 33 0 255 BLADE Speed FAST to SLOW 32 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com ELATION PLATINUM PROFILE LED DMX Channel Values Functions Version 1 86 DMX Channels Specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO PRISM and BLADE effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND 0 14 OFF 15 29 Blade Macro 1 30 44 Blade Macro 2 45 59 Blade Macro 3 60 74 Blade Macro 4
17. RAIN AND MOISTURE UNPLUG POWER BEFORE SERVICING FIXTURE NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK A A e For proper operation follow the Installation guidelines described in this manual Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury to your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times The fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating 7 PLATINUM PROFILE LED User Manual Ver 1 www el
18. anship for a period of two years 730 days and Elation Professional amp product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months 180 days from the original date of purchase This warranty excludes discharge lamps and all product accessories This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional amp will pay return shipping charges only to a designated point within the United States If any product is sent it must be shipped in its original package and packaging material No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss and or or damage to any such accessories nor for the safe return thereof C This warranty is void if the product serial number and or labels are altered or removed if the product is modified in any manner which Elation Professional amp concludes after inspection affects the reliability of t
19. ate that field and use the UP and DOWN buttons to adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing the MODE ESC button NOTE To access the LCD Menu Control Display via the internal battery press and hold the MODE ESC button for 3 seconds The LCD Menu Control Display will shut OFF automatically about I minute from the last button press Dax Mode Extended 4 gt LATIN DHK M PROFILE L Head Tenp OFF Address 001 17 PLATINUM PROFILE LED User Manual Ver 1 PROFESSIONAL www elationlighting com ELATIONO PLATINUM PROFILE LED SYSTEM MENU Specifications and features are subject to change without any prior written notice MAIN MENU SUB MENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION Set DMX Address AXXX DMX Adaress Setting DMX Value ALL DMX Value Display Slave Mode Slavel Slave2 Slave3 Slave Setting Auto Program Master Alone Auto Program Current Time XXXX Hours Fixture Run Time From Power ON Total Run Time XXXX Hours Fixture Total Run Time Time Information Last Run Time XXXX Hours Clear Fixture Last Run Time LastRun Password Password XXX Password 038 INFORMATION Clear Last Run ON OFF Reset Fixture Last Run Time Temperature
20. ationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating to prevent any fire hazard The fixture must be installed in a location with adequate ventilation at least 1 5 feet 5m from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT permit operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years to come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the f
21. bo Wheels to Horne Positions RESET FUNCTION Reset Blades Reset only Framing Blades to Horne Positions RESET FUNCTION Reset Focus Reset only Focus motor to Home Position RESET FUNCTION Reset Others www elationlighting com Reset ALL other motors not associated previously listed commands to Home Position EFFECT ADJUST Test Channel Select and auto test each individual channel function independently from the DMX control board EFFECT ADJUST Manual Control Select and manually test and fine adjust each individual channel function Independently from DMX control board This function will center PAN and TILT motors and set dimmer to 10096 PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear surface With the individual functions you can focus the light on a flat surface wall and perform fine adjustments 24 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com EFFECT ADJUST Calibration 13 ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION This function allows small adjustments to be made to the effect wheels to compensate for ware or in the event a sensor has been knocked slightly out of place Because improper use of this function can result in undesired operation this function has been password protected The password is 050 and must be entered each time the calibration menu function is entered Because calibration is an extr
22. ch as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 DMX controller Address 73 Address 37 Address 1 14 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator will decrease the possibilities of erratic behavior 1200 Termination reduces signal errors and avoids signal transmission problems I and interference It is always advisable to connect a DMX terminal Resistance J 120 Ohm 1 4 W between PIN 2 DMX bes and PIN 3 DMX of the last fixture 5pin XLR DMX CONNECTORS Some manufactures use 5pin XLR connectors for DATA transmission in place of 3pin 5pin XLR fixtures may be implemented in a 3pin XLR DMX line When inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 3 Pin XLR Female Out 5 Pin XLR Male In a ME vous mms oomeruse 15 PL
23. emely delicate procedure instructions on performing this action are left out of this manual For a first time calibrator please contact our Customer support team for step by step instructions USER MODE SET User Mode Select operating mode which includes DMX Channel and User defined modes USER MODE SET Edit User Mode Create user defined channel orders allowing the fixture to match the channel order of other fixtures on the market for easier operation A total of three user modes may be configured User Mode A User Mode B and User Mode C EDIT PROGRAM Select Program Select one of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Program Edit any of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Scenes Edit any of the scenes of the internal Auto Programs 25 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller The fixture features an integrated DMX recorder by which you can transmit the programmed scenes from your DMX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head EDIT PROGRAM Record Controller Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 differ
24. ent programs The Master unit sends the 3 program parts in a continuous loop Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to If e g a Slave unit is set to Slave 1 in the menu Set to Slave the Master unit sends Auto Program Part 1 to the Slave unit If set to Slave 2 the Slave unit receives Auto Program Part 2 To start an Auto Program proceed as follows 1 Slave Setting Select Function Mode Press ENTER to confirm Select Set to Slave Press ENTER to confirm Select Slave 1 Slave 2 or Slave 3 Press ENTER to confirm Press MODE ESC in order to return to the main menu 2 Automatic Program Run e Select Function Mode Press ENTER to confirm Select Auto Program Press ENTER to confirm Select Master or Alone Press ENTER to confirm Press MODE ESC in order to return to the main menu 26 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Programs continued 3 Program Selection for Auto Pro Part Select Edit Program Press ENTER to confirm Select Select Programs Press ENTER to confirm Select Auto Pro Part 1 Auto Pro Part 2 or A
25. er Manual Ver 1 ETATION www elationlighting com ELATIONO PLATINUM PROFILE LED SYSTEM MENU Specifications and features are subject to change without any prior written notice MAIN MENU SUB MENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION Reset All Reset All Motors Reset Iris Reset Iris Motor Reset Frost Reset Frost Motor Reset Pan amp Tilt Reset Pan Tilt Motors Reset Function Reset Colors Reset Color Wheel Reset Gobos Reset Gobos Reset Blades Reset Framing Blades Reset Focus Reset Focus Motor Reset Others Reset Other Motors Test Channel PAN Test function Effect Adjust Manual Control PAN XXX Fine Adjustments Calibration Calibration Password Password 050 Standard Mode Basic Mode DMX Channel Modes Extended Mode yser Moce User Mode A User Mode Set User Mode B User Defined Channel Assignment User Mode C Edit User Mode Edit User Mode A Edit User Mode B Edit User Mode C Max Channel XX PAN Edits User Defined Channel Assignments Select Program Auto Pro Part Program 1 10 Program 1 Auto Pro Part2 Program 1 10 Program 2 Auto Pro Part3 Program 1 10 Program 3 Select Programs To Be Run Program 1 Program Test Testing Program Edit Program Step 01 SCxxx Program In Loop Edit Program Program 10 Step 64
26. ful when the device is installed in a remote area RDM ready and conventional DMX devices can be operated in one DMX line The RDM protocol sends its own packages in the DMX512 data feed and does not influence conventional devices If DMX splitters are used and RDM control is to be used these splitters must support RDM The number and type of RDM parameters depend on the RDM controller being used PERSONALITY Service Setting Ethernet IP Enter the Ethernet IP address of the fixture PERSONALITY Service Setting Ether IP Mask Enter the Ethernet Subnet Mask IP address of the fixture PERSONALITY Service Setting Clear Err Info Clear Error info of the fixture PERSONALITY Fans Control Select desired Fan setting PERSONALITY Display Setting Shutoff Time Define how many minutes before the LCD Menu display will automatically shut OFF PERSONALITY Display Setting Display Reverse When ON the LCD Menu display by is rotated inverted 180 PERSONALITY Display Setting Key Lock When ON Control Panel buttons lock automatically after exiting main menu for 15 seconds To unlock keep MODE ESC button pressed for 3 seconds 22 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com PERSONALITY Temp C F Define how fixture displays internal temperature Celsius or Fahrenheit PERSONALITY Initial Status Create custom PAN TILT and Effect settings and save as a custom Horne Posit
27. h this product including warranties of merchantability or fitness are limited in duration to the warranty periods set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said periods have expired The consumer s and or dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss and or damage direct and or consequential arising out of the use of and or the inability to use this product This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com ee 9 9 SAFETY INSTRUCTIONS The PLATINUM PROFILE LED is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections KEEP THIS FIXTURE AWAY FROM
28. he product if the product has been repaired or serviced by anyone other than the Elation Professional amp factory unless prior written authorization was issued to purchaser by Elation Professional amp if the product is damaged because not properly maintained as set forth in the product instructions guidelines and or user manual D This is not a service contract and this warranty does not include any maintenance cleaning or periodic check up During the periods as specified above Elation Professional will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional amp All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional amp reserves the right to make changes in design and or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with the products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professionale in connection wit
29. hether a DMX data signal is being received or not If DMX data signal is being received the display will show AddrzXXX XXX representing the actual DMX address If the fixture is not receiving a DMX signal the display will flash If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following The 3pin or 5pin XLR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture he DMX controller is switched off or defective he DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in your DMX chain 16 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The PLATINUM PROFILE LED comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the PLATINUM PROFILE LED During normal operation pressing MODE ESC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP DOWN RIGHT and LEFT buttons Once you reach a field that requires adjusting press the ENTER button to activ
30. ion PERSONALITY Select Signal DMX Only Define DMX as the default control of the fixture PERSONALITY Select Signal Art Net on IP2 Define Art Net IPO2 as the default control of the fixture PERSONALITY Select Signal Art Net on IPOTO Define Art Net IP010 as the default control of the fixture PERSONALITY Set Universe Define the Art Net Universe number PERSONALITY Dimmer Modes Select desired DIMMER MODE Standard Stage TV Architectural Theatre 100 m a I I 50 I I i 10 0 t 3 Tie ms 0 255 255 Fade Ti Ramp Effect o 05 Fade Time 0 1S Fade Time Trise ms ms Tre ms Teown ms Standard 0 0 0 0 Stage 780 1100 1540 1660 TV 1180 1520 1860 1940 Architectural 1380 1730 2040 2120 Theatre 1580 1940 2230 2280 PERSONALITY Reset Default When ON all factory settings are restored 23 PLATINUM PROFILE LED User Manual Ver 1 RESET FUNCTION Reset ALL Reset ALL internal motors to Home Position RESET FUNCTION Reset Iris Reset only Iris motor to Home Position RESET FUNCTION Reset Frost Reset only Frost motor to Home Position RESET FUNCTION Reset Pan amp Tilt Reset only Pan amp Tilt motors to Horne Positions RESET FUNCTION Reset Colors Reset only Color Wheel to Horne Position RESET FUNCTION Reset Gobos Reset only Go
31. ixture Use the original packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare hand during its operation Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving 8 PLATINUM PROFILE LED User Manual 1 www elationlighting com FIXTURE OVERVIEW LED Assembly Carrying Handle s LCD Menu Function Display LEFT Button DOWN Button ENTER Button RIGHT Button MODE ESC Button UP Button RJ45 Network IN RJ45 Network OUT Spin DMX IN 5pin DMX OUT powerCON IN powerCON OUT Fuse 9 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com FIXTURE INSTALLATION FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ft 1 5m away from any flammable materials decorations pyrotechnics etc ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and or installations EE CAUTIONS Foradded protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Ambient operating temperature range for this fixture is 14 to 113 F 10 to 45 C Do not use the fixture under or above this temperature Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture Fixture installation must a
32. ixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which the fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a starting DMX adaress of 1 may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to address 1 to that fixture no matter where it is located in the DMX chain The PLATINUM PROFILE LED can be controlled via DMX 512 protocol and the DMX address is set via the control menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3pin or 5pin XLR connector for data input and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be made wi
33. l 1 movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB Gobo Wheel 1 Er The Gobo Rot 1 movement is not located in the default position after the reset This message will appear after a fixture reset if the gobo wheel s Gobo Rot 1 Er moagnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Gobo Wheel 2 movement is not located in the default position after the reset This message will appear after a fixture reset if the magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB Gobo Wheel 2 Er The Focus movernent is not located in the default position after the reset This message will appear after the reset of the fixture reset if the Focus Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB 35 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com eec 9 9 ELATIONO PLATINUM PROFILE LED ERROR CODES Specificatio
34. lationlighting com DMX CHANNEL FUNCTIONS AND VALUES ELATIONO PLATINUM PROFILE LED DMX Channel Values Functions Version 1 36 DMX Channels Specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO PRISM and BLADE effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND 0 255 PAN Movement 0 255 Fine Control of PAN Movement 0 255 TILT Movement Eu 0 255 Fine Control of TILT Movement COLOR WHEE 0 20 OPEN WHITE 21 41 DARK RED 42 62 AQUA 3 5 63 83 UV FILTER 84 104 PINK 105 127 ORANGE 128 189 Clockwise Color Wheel Rotation from FAST to SLOW 190 193 NO Rotation 194 255 Counterclockwise Color Wheel Rotation from SLOW to FAST S 0 255 FINE Adjustment of Color Wheel to Any Position MI 0 17 OPEN WHITE 18 35 RED 36 53 GREEN 54 71 BLUE 4 6 7 72 89 YELLOW 90 107 MAGENTA 108 127 CTO 128 189 Clockwise Color Wheel Rotation from FAST to SLOW 190 193 NO Rotation 194 255 Counterclockwise Color Wheel Rotation from SLOW to FAST n 0 255 FINE Adjustment of Color Wheel to Any Position 29 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com ELATION PLATINUM PROFILE LED DMX Channel Values Functions Version 1 86 DMX Channels Specifications a
35. lways be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing eS POWER LINKING Max number of units that can be power linked is 5 units 120V 10 units 240V 10 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com MOUNTING POINTS Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury Fixture is fully operational in the specific mounting positions as illustrated below SE 2 SZ ___ MESS MA 24 2 A RAIN XX Wa MZ i 7 FY Nyo 06 S S N 0 L3 vr S 52 SITT AS 6 B NAZ N 222 Ps AN 5 lt S 222 SZ ZN C NR S AN 2 wa o DS EE oS 2 xz ca 3 NS Mer SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails 11 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com CLAMP MOUNTING The PLATINUM PROFILE LED provides a unique mounting bracket assembly
36. mplete the address reset function PERSONALITY Status Settings No DMX Status Define how fixture operates if NO DMX signal is detected PERSONALITY Status Settings Pan Invert When ON all PAN movements are reversed inverted PERSONALITY Status Settings Tilt Invert When ON all TILT movements are reversed inverted PERSONALITY Status Settings Pan Degree Select desired maximum degree of the Pan movement PERSONALITY Status Settings Feedback When ON the fixture automatically performs PAN TILT correction in the event either one is disrupted during normal operation PERSONALITY Status Settings Movement Speed Select desired Movement Speed 21 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com PERSONALITY Status Settings Hibernation Select desired Hibernation time PERSONALITY Service Setting Password Display the fixture timer password 050 NOTE The Service Password MUST be entered in order to access the following menus RDM PID Ethernet IP Ether IP Mask and Clear Err Info PERSONALITY Service Setting RDM PID Select various submenus via RDM RDM stands for Remote Device Management which provides the ability to control the device remotely while connected to a DMX bus ANSI E1 20 2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol Manual settings like adjusting the DMX starting adaress are no longer needed This is especially use
37. n Clear Last Run Resets the last run time of the fixture INFORMATION Temperature Infor Head Temp Displays temperature of the fixture INFORMATION Temperature Information Ethernet IP Displays temperature of the Ethernet IP address of the fixture INFORMATION Software Version Displays software version of the fixture INFORMATION Error Info Displays last 10 Error Records of the fixture 20 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com PERSONALITY Status Settings Address Via DMX When ON define the desired DMX address via an external controller 1 Connect the fixture to the external controller and power ON 2 Set the DMX value of Channel 1 on the controller to 7 3 Set the DMX value of Channel 2 on the controller to 7 or 8 When set to 7 the DMX address can be set between 1 and 255 When set to 8 the DMX adaress can be set between 256 and 511 4 Using Channel 3 on the controller set the desired DMX address of the fixture Example 1 If the desired DMX address is 57 set Channel 1 to a value of 7 set Channel 2 to a value of 7 and then set Channel 3 to a value of 57 Example 2 If the desired DMX address is 420 set Channel 1 to a value of 7 set Channel 2 to a value of 8 and then set Channel 3 to a value of 164 256 164 420 5 After setting Channel 3 to the desired DMX address value wait for approximately 20 seconds for the fixture to co
38. ns and features are subject to change without any prior written notice ERROR CODE DESCRIPTION The Prism movement is not located in the default position after the reset This message will appear after the reset of the fixture reset if the Prism Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The Prism Rot movement is not located in the default position after the reset This message will appear after a fixture reset if the gobo wheel s Prism Rot Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB The BladeR movement is not located in the default position after the reset This message will appear after the reset of the fixture reset if the BladeR Er magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB 36 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com CLEANING AND MAINTENANCE C Disconnect power before cleaning maintenance CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in
39. o 5 84 97 Static Fixed Gobo 6 7 9 12 98 111 Static Fixed Gobo 7 112 127 Shake SLOW to FAST Static Fixed Gobo 1 128 143 Shake SLOW to FAST Static Fixed Gobo 2 144 159 Shake SLOW to FAST Static Fixed Gobo 3 160 175 Shake SLOW to FAST Static Fixed Gobo 4 176 191 Shake SLOW to FAST Static Fixed Gobo 5 192 207 Shake SLOW to FAST Static Fixed Gobo 6 208 223 Shake SLOW to FAST Static Fixed Gobo 7 224 255 Clockwise Gobo Wheel Rotation from FAST to SLOW 30 PLATINUM PROFILE LED User Manual Ver 1 ETATION www elationlighting com ELATION PLATINUM PROFILE LED DMX Channel Values Functions Version 1 86 DMX Channels Specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO PRISM and BLADE effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND 0 63 OPEN 64 127 3 FACET Rotating Prism 28 135 Prism Gobo Macro 1 36 143 Prism Gobo Macro 2 44 151 Prism Gobo Macro 3 52 159 Prism Gobo Macro 4 60 167 Prism Gobo Macro 5 68 175 Prism Gobo Macro 6 8 10 13 76 183 Prism Gobo Macro 7 184 191 Prism Gobo Macro 8
40. re subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO PRISM and BLADE effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND 0 9 ROTATING GOBOS CONTINOUS ROTATION GOBO WHEEL 1 OPEN 10 19 Rotating Gobo 1 20 29 Rotating Gobo 2 30 39 Rotating Gobo 3 40 49 Rotating Gobo 4 50 59 Rotating Gobo 5 60 69 Rotating Gobo 6 5 7 9 70 79 Rotating Gobo 7 80 95 Gobo 1 Shake SLOW to FAS 96 111 Gobo 2 Shake SLOW to FAST 112 127 Gobo 3 Shake SLOW to FAST 128 143 Gobo 4 Shake SLOW to FAST 144 159 Gobo 5 Shake SLOW to FAST 160 175 Gobo 6 Shake SLOW to FAST 176 191 Gobo 7 Shake SLOW to FAST 192 255 0 127 ROTATING GOBOS INDEX ROTATION GOBO WHEEL 1 Clockwise Gobo Wheel Rotation from FAST to SLOW Gobo Indexing 6 8 10 128 189 Clockwise Gobo Rotation from FAST TO SLOW 190 193 NO Rotation 194 255 0 255 1 ROTATING GOBOS FINE INDEX ROTATION GOBO WHEEL 1 0 13 STATIC FIXED GOBOS GOBO WHEEL 2 Counterclockwise Gobo Rotation from SLOW to FAST Gobo Rotation FINE Indexing OPEN 14 27 Static Fixed Gobo 1 28 41 Static Fixed Gobo 2 42 55 Static Fixed Gobo 3 56 69 Static Fixed Gobo 4 70 83 Static Fixed Gob
41. ry PLATINUM PROFILE LED has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS 2 Omega Brackets 1 5pin DMX Cable 1 powerCON Cable 1 Safety Cable Manual amp Warranty Card 4 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional amp ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85
42. th a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 13 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data e 2 Data o e 3 Data 4 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the PLATINUM PROFILE LED The diagram below illustrates a typical DMX 512 connection when the fixture is in the 36 Channel Extended Mode You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter su
43. uto Pro Part 3 and select which Slave program is to be sent Selection Part 1 means that the Slave unit runs the same program as the master units Press ENTER to confirm Press MODE ESC in order to return to the main menu 4 Program Selection for Edit Program Select Edit Program Press ENTER to confirm Select Edit Program Press ENTER to confirm Select the desired program With this function you can edit specific scenes into a specific program Press ENTER to confirm Press MODE ESC in order to return to the main menu 5 Automatic Scene Recording Select Edit Program Press ENTER to confirm Select Edit Scenes Select desired scene numbers A maximum of 250 scenes can be programmed Press ENTER to confirm Press MODE ESC in order to return to the main menu 27 PLATINUM PROFILE LED User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Programs continued Example Program 2 includes scenes 10 11 12 amp 13 Program 4 includes scenes 8 9 amp 10 Program 6 includes scenes 12 13 14 amp 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments as shown in the following picture Part 1 Pe eit ee S Part 2 of sem sem me 28 PLATINUM PROFILE LED User Manual Ver 1 ETATION www e
Download Pdf Manuals
Related Search