Manuel d`utilisation
Contents
1. of the FI sticker The system emits one beep and the red LED lights on permanently Remove the magnetic key and release the button Within the 10 seconds following the previous action while the red LED still be lit proceed to the following operation depending on the accessory e Remote Press on button 7 see 1 2 e Sensor bracelet Immerse the bracelet into a glass of water then take it out e Keypad Simply press the P key e Opening detector Perform a complete opening closing cycle by taking away the magnet from the sensor and then bringing it back close to the sensor lf the procedure has been successfully terminated the system emits another beep and the green LED lights on during several seconds The accessory is then ready to use Note Do not last for approaching the magnetic key while the button is pressed otherwise you may enter the waterfall detector configuration mode Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 3 USING THE REMOTE CONTROL 3 1 Arming disarming the alarm system The system can be activated with the remote Push the button 4 see 2 3 The central emits series of beeps and the monitoring green LED starts blinking To deactivate it push the button 4 while maintaining the button 5 pressed The system is deactivated for 8 minutes if no activity is detected in the pool This time will be automatically prolonged as long as the swimming is in course 3 2 Shut2. ACCESSORIES FOR THE WATER IMMERSION DETECTOR ALARM SYSTEM OCEAPROTECT This document applies for optional accessories for the DSP70 C1 kit To read attentively and to conserve for further consultation Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 Table of contents 1 DESCRIPTION OF THE ACCESSORIES airsoii nE 3 e E E oa e a 2 E AE A ee ee ee eee ee ee 3 L2 ROMO oe E E ene ee ee eee nee 3 1 3 Wireless KOypaO esecuri ruin aa e E EEE eE ESNE 4 1 4 Door opening detector eee cecccesssscccesssseeceessssceceessaeeeessseseeeessaseeceseeaeeeesesaeeecesesaeees 4 2 ACCESSORY RECOGNITION PROCEDURE saannsennssennnennnsnrnnennnnnrnnenrnnnrrserrnnrerenene 5 3 USING THE REMOTE CONTROL 00 c0 0cccccsesceccesecsceneessesenesereseeeeesceeescesescseeeseeee 6 3 1 Arming disarming the alarm SYStOM cccccssccccssssseecessseeceesssaeecesssseeeesssaseeeeseeas 6 3 2 Shutting down the alarm SYStOM c ccc ccssccesssecccsseeceesseeceesseeceesseeeeesseeceessesesensees 6 a USING THE SENSOR BRACELET erra E E OENE 6 4 1 Locking the sensor bracelet around the WYiSt eee ceescceessteeeeeseeeesseeeessseeensnnees 7 4 2 Unlocking the sensor bracelet from the WYiSt cccccccsescccesesseecesessseeeesesseeeeeseaes 7 A WS SUIS TS OC este sca E cess ease atest eee 8 5 Limits of USE 20 cee cece ecc cece ecc asec cece eece eee eeaeeeeeeseeeeeeeauesaeesaeesaeeseeesueeaueseeseeeseeeseeseeeseeeges 8
3. AGOGESSORYLCOWBATTERY ALBER lr cecscdeccenaee a esrneteaccvaad auavactgecsucdsacdaenssonieatinesoen 8 1 MAINTENANCE eressero nt aise sen EE EE EE EE EE E 8 7 1 Changing the battery of the sensor bracelet 000nnnnnnsnnnssnnesneeessneessnessnsessseressn 8 7 2 Changing the batteries of the remote CONTIOL ee cececcseeceseeeseeeeeeeessneeneeeseneens 9 8 IN CASE OF PROBLEMS cccccccccccceeececeeeeeceeeeeseecesseeeseeeesseeeesseeeesaaeeessaeeesaneeesaaes 9 9 WASTE COLLECTION FOR ELECTRONIC EQUIPMENTS AND BATTERIES 10 1 The contents of this booklet may be subjected to changes without any prior notice 2 Due to printing restrictions the symbols displayed in this manual may differ from the ones in the product 3 The contents of this booklet cannot be reproduced without the authorization of the manufacturer Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 1 DESCRIPTION OF THE ACCESSORIES The Oceaprotect alarm system can handle up to 16 accessories 1 1 Sensor bracelet The sensor bracelet is placed around the child s wrist If this latter falls into the water the bracelet detects the presence of water thanks to its two electrodes 1 and transmits the information instantaneously by radio waves to the central unit that triggers the siren even when the system is temporarily disarmed Each bracelet is equipped with a mechanical security clasp 3 which makes its accidental or voluntary
4. alert LED lowest red LED still be off To find what is the failing component renew the recognition procedure 2 for each accessory If the battery still be in good condition the procedure will terminate successfully Otherwise the failing component has just been found After having replaced the batteries of the failing accessory the low battery signal does not disappear unless you force the accessory to transmit sending a command in case of the remote or keypad opening closing in case of a door opening detector shaking the device in case of a sensor bracelet 7 MAINTENANCE Test the sensor bracelet before each use It is important to keep the bracelet clean Do not put the bracelet inside the washer nor use abrasive products Wash the two electrodes with a soft tooth brush soap and water 7 1 Changing the battery of the sensor bracelet The battery of the sensor bracelet lasts 2 years If the indicator announces weak battery bracelet change the battery type 3V CR2032 as shown below Figure 10 Changing the battery of the sensor bracelet Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 7 2 Changing the batteries of the remote control The remote control s batteries lasts about 3 years If the indicator announces weak battery remote control change the two batteries type CR1220 as follows 1 Open the remote control with a Phillips screwdriver 2 Extract the old batteries from its holder and replace
5. elet around the wrist Insert the strap into the slot underneath the bracelet body and adjust it to the child s wrist Do not put it on too tight Lock the sensor bracelet Figure 8 Locking the bracelet 4 2 Unlocking the sensor bracelet from the wrist To unlock the bracelet pinch the smaller end against the casing to release the catch and slide the tongue out by pulling on the larger end Then remove the strap by pulling gently lt is necessary to carry out this handling simultaneously to slide the tongue out yp a Pinch the side of the bracelets body 2 Slide the tongue out Pull on the 3 security clasp Figure 9 Unlocking the bracelet Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 4 3 Testing the bracelet Test the bracelet before each use Dip the sensor bracelet into the water of the pool The alarm goes off within two seconds following the immersion of the bracelet When the test of the range is valid it is possible to renew the procedure from another location of the pool as many times as necessary The bracelet still operate even when the alarm system is disarmed 5 Limits of use The safety sensor bracelet has to be used for children under five years old This safety system is not compatible with salted water pools e g salt chlorinator appliances 6 ACCESSORY LOW BATTERY ALERT When the battery of any accessory runs down the alarm system emits one beep every 30 seconds but the failure
6. ity with the European Directive 2002 96 EC On Waste Electrical and Electronic Equipment The purpose is to recycle or treat in order to reduce the impact on the environment For more information please contact your local administration The electronic products not subject to a selective waste collection are potentially dangerous for the environment and human health because they may contain dangerous substances Important During the replacement of your batteries we request you to comply with the regulation in place with regards to their elimination Dispose of used batteries in an environmentally friendly fashion by using the existing public collection Firstinnov 5 rue du Chant des Oiseaux 78360 Montesson France Email contact firstinnov com T l 08 92 259 220 0 41 TTC minute 1 Facturation selon les conditions tarifaires de OBL de l appelant tarifs applicables en France m tropolitaine depuis tout poste fixe hors publiphones
7. l The system arming and temporary disarming x ee The system disarming for an indeterminate period of time by using a 6 digit code For a detailed description of the keypad functions please refer to its user s manual Shutting down the system for an indeterminate period of time is not authorized unless the pool is protected by another certified device cover shutter or if you are not planning to use the pool for a long period of time Entering this special mode via the keypad requires first to disarm the system in the usual way temporary deactivation 1 4 Door opening detector The door opening sensor is an additional safety system that D warns the users when a door providing access to the pool stays open It includes the RF wireless sensor and the magnet for door or gantry opening detection The alarm system will start beeping as soon as the door still be open during more than 10 seconds Sensor Magnet Closing the door will automatically stop the beeps Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 2 ACCESSORY RECOGNITION PROCEDURE Battery pack connector Button Red LED Green LED Blue FI sticker Magnetic key Figure 2 Accessory recognition Proceeding to the system accessory recognition requires to follow the procedure hereunder for each accessory to be used Disconnect then reconnect the battery pack While keeping the button pressed place the magnetic key in front
8. removal difficult for a child 1 Water sensitive detector electrodes 2 Logo FI used for older alarm system versions 3 Bracelet locking security clasp Figure 1 Sensor bracelet Warning The safety sensor bracelet has to be used for children under five years old This safety system is not compatible with salted water pools e g salt chlorinator appliances 1 2 Remote The remote enables you to arm and temporary disarm the alarm system from a distance 4 Activation button To activate the alarm system push the button 4 the central unit emits a series of beeps and the green LED starts blinking If the water is not stabilized enough or if the alarm went off less than 8 minutes it would be necessary to wait or let the system rearm itself automatically 5 Temporary deactivation button on the remote To deactivate the system push on the button 4 while maintaining the button 5 pressed buttons 4 and 5 pressed simultaneously After a beep has been emitted release the buttons The button 7 will be used in the recognition procedure see 2 Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 The alarm system from the DSP70 C1 kit can be operated with the remote control as soon as the recongition procedure 2 has been performed However in that case it still be possible to the originally provided magnetic key 1 3 Wireless keypad The wireless keypad enable you to control
9. them by the new ones making sure the marking is facing up Do not forget to put back the plastic ring that surrounds the batteries 3 Shut the housing back and test the remote refer to 3 using the remote control 8 IN CASE OF PROBLEMS Problem Probable cause The LEDs of the alarm This has no relation with any Check the connection of the system dont turn on accessory or the system is battery pack 9V and ensure switched off See DSP70 C1 that you did not unintentionally user s manual switched the system off The siren goes on in Safety bracelet was accidentally Remove the bracelet battery monitoring mode or wet and check if this does not temporarily disarmed Defective sensor bracelet happen anymore mode Impossibility to carry Battery of the accessory is weak out the recognition of Change the battery an accessory The sensor bracelet The electrodes are obstructed Clean the electrodes does not work Weak battery Change the battery Too big of a distance between Re examine the installation the bracelet and the alarm system and the position of the system Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 9 WASTE COLLECTION FOR ELECTRONIC EQUIPMENTS AND BATTERIES This product is labelled with the symbol indicating separate waste collection for electrical and electronic equipment which means that this product must be recovered by a recognised waste management facility in conform
10. ting down the alarm system As a back up method if no more magnetic key nor keypad is available the remote control can be used as a magnetic key to shut the system down for an indeterminate period of time This is not authorized unless the pool is protected by another certified device cover shutter or if you are not planning to use the pool for a long period of time In that case ensure first that the alarm system is armed green LED blinking then place the remote control back FI sticker in front of the alarm FI sticker The alarm will immediately emit one beep Keep the device in place until a second beep is emitted approx 15 sec Then no more LED are flashing The alarm is completely switched off To set the alarm back into normal operating mode use the remote control in the same way until the alarm beeps and the red LED flashes back again 4 USING THE SENSOR BRACELET When the system is installed and tested you only need to put the bracelet around the child s wrist The sensor bracelet is always functional even when the alarm system is switched off no LED flashing at all Accessoires du Kit Oceaprotect DSP70 Cl Version 1 3 4 1 Locking the sensor bracelet around the wrist Put the bracelet around the wrist of the child insert the strap into the slot underneath the bracelet body and push tight Then lock the clasp by sliding the tongue of the catch home until it clicks Follow the steps below to fit the sensor brac
Download Pdf Manuals
Related Search