User`s Manual - Sunsky
Contents
1. GHz Wireless camera about 20 feet 2G Cellular phone 1 about 40 feet 2G Cellular phone 2 about 50 feet Wired camera about 15 feet regular 10mW camera regular 10mW camera set at Analog set at Digital oN Specifications may change without notice WARNING Use this device as an auxiliary supplemental help or aid to prevent the risks caused by hidden camera cellular phone or other wireless devices This device does not take the place of all the supervisions Performance of this Radio frequency RF product will be affected by the circumstance of use The producer and marketing group accepts no liability for any loss or damage by malfunction or misuse COPYRIGHT No part of this manual may be reproduced transmitted transcribed or translated into any language in any form by any means electrical or mechanical including photocopying recording or information and retrieval systems without the express written permission of manufacturer Products mentioned in this manual are for identification purposes only All brand names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies The manufacturer reserves the right to change or modify the specifications of any one or all of these products as deemed necessary at any time without prior notification The manufacturer may further revise this manual from time to time without prior notice Copyright 2001 2010 Patent pending All ri2. LOW BATTERY WARNING When the detector is switched on and the LED in the bottom with a battery icon is Red it means the batteries run down Please replace new batteries SILENT DETECTION SH 055GRV r i o SH O55GRV This model also has VIBRATE detection to warn you when you do not hold this device in hand to scan an environment o Besides you also can detect by earphone hearing without others awareness ZA NOTICE OF USE 1 If you are not going to use this device for a long time remove the batteries to avoid damage caused by corrosion from battery leakage 2 Unauthorized repair or dismantle of this device will void all the warranties 3 Avoid water 4 Do not store this device in an excessively hot place 5 Avoid knocks or dropping this device 6 The ultra bright LED is not suitable for continous light up Please switch off the ultra bright LED once 3 minutes 7 Never use the antenna of this device to touch a metal surface or the antenna of signal emission source The quality warranty does not include the damage caused by static electricity or feedback SPECIFICATION Power AAA UM 4 battery x 2 3V DC 50 MHz 6 0 GHz Dimension L 87 x W 55 x H 24mm Weight 105g Audible alarm and 3 LEDs Vibration and 3 LEDs SH 055GRV Silent 3 LEDs and earphone hearing Detecting frequencies Warning mode 1 Warning mode 2 Warning mode 3 Detecting Distance 5 8GHz Wireless camera about 8 feet 2 4
3. al waves of cellular phone is pulse wave so the LED of the detector will be blinking when the detector detects someone uses cellular phone And the buzzer will go off discontinuously and small sound SENSITIVITY ADJUSTMENT Sensitivity tuner 4 _ gt Turn the sensitivity tuner to minus side to decrease the sensitivity and the detecting distance will be shorter Turn the sensitivity tuner to plus side to increase the sensitivity and the detecting distance will be longer INTERFERENCE BACKGROUND NOISE ELIMINATION 1 The sensitivity tuner is also used to eliminate the background noise interference 2 lf the scan environment has other noises that interfere with your detector the strength indication LED will light up 3 If this condition appears adjust the sensitivity by turning the sensitivity tuner to minus side to decrease the sensitivity until the Level 1 Yellow LED slightly lights up 4 In normal condition when turning on the power only the power LED goes Green to confirm the detector is in normal condition
4. ghts reserved Suresafe Pro Hunter are trademark of the manufacturer Made in Taiwan 55GRVPK1A 08 2010 CR SH 055GRV with Analog Digital select switch Superior sensitivity RF Signal Detector Exposing Spy Camera Bug and Cellular Phone and Bluetooth etc Adds hard wire camera detection User s Manual Thank you for purchasing the Suresafe RF Radio Frequency Signal Detector Please first read over this manual for proper use save this manual and keep it handy This device applies with fuzzy scanning technology to detect peeping cameras bug cellular phones and other radio frequency devices This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly This device has a new digital amplifier to heighten the indication for the digital signals of Bluetooth WLAN Wi Fi cellular phone and Digital Spread Spectrum wireless products etc Wire detection switch e This device has 3 LEDs indicating the detected signal strength When detecting cellular phone or peeping camera the LED will light from Level 1 to Level 2 to Level 3 and the beeping sound will change from Slow to Rapid indicating the strength of detected signal HOW TO OPERATE 1 Slide and remove the battery lid install two AAA UM 4 batteries matching correct and poles as indicated then slide the battery lid back 2 Pull out the antenna and turn on the switch to upper s
5. ide 3 The power LED will go Green to confirm the detector is operated correctly 4 Before scanning an environment please first set up the sensitivity benchmark Turn the sensitivity tuner to plus side until the Level 1 LED goes Yellow then turn the sensitivity tuner to minus side to decrease the sensitivity until the Level 1 LED goes slightly Yellow 5 When you switch on this device and the strength LEDs light up it means the detecting benchmark is too sensitive Turn the sensitivity tuner to minus side to decrease the sensitivity until the Level 1 LED goes slightly Yellow 6 When this device detects signal of cellular phone or wireless camera the strength LED will light up from Level 1 Yellow gt Level 2 Yellow gt Level 3 Red indicating the strength of detected signals 7 Meanwhile the buzzer will be beeping and the sound will be changing from slow to rapid indicating the strength of detected signals WIRED CAMERA DETECTION 1 There is a Wire detection switch on the upper side press down the red button it will active the ultra bright LEDs for scanning suspected areas Press the switch again the red light will put out 2 Office or private room has alot of metal or optical object with shinning surface which will reflect the illuminated light Few more practices will help identify the lens of hidden camera 3 When you find a suspected reflection shake your detection light right and left slight
6. ly If the location of the reflection shifts as you shift it is not a camera 4 lf the location of the reflection does not shift then you might have discovered the lens of a hidden camera 5 The ultra bright LED is not suitable for continous light up Please switch off the ultra bright LED once 3 minutes Camera lens Illuminated Camera lens Original Wired camera detection ANALOG DIGITAL SELECT SWITCH The signal of wireless camera hidden microphone and walki talki 2 way radio are analog signal The signal of Bluetooth WLAN Wi Fi cellular phone and digital soread spectrum products are digital signal Usually set the A D switch to A When to detect analog signals the LED of the detector will light up without blinking and the buzzer will go off continuously When to detect digital signals the LED of the detector will be blinking and the buzzer will go off dis continuously and small sound Set the A D switch to D it will have stronger indication for the digital signals of Bluetooth WLAN cellular phone and Digital Spread Spectrum wireless products etc HOW TO DISTINGUISH IFIT IS A SIGNAL OF WIRELESS CAMERA OR HIDDEN MICROPHONE OR CELLULAR PHONE The signal waves of wireless camera and hidden microphone is continuous wave so the LED of the detector will light up without blinking when the detector detects a wireless camera or hidden microphone And the buzzer will go off continuously The sign
Download Pdf Manuals
Related Search