view User`s Manual in format - COP
Contents
1. CAMERA i RESTART FACTORY DEFAULTS HELP EXIT MOTION lt PRESET gt SCAN lt SEQUENCE gt lt PATTERN gt lt ZONES gt TIMING ACTION lt MOTION DETECT gt AUTO TRACKING BACK EXIT SCAN SCAN NO 1 TITLE SCAN 1 START LEFT LIMIT RIGHT LIMIT SCAN SPEED 20 BACK EXIT The dome supports 8 groups of auto scan Please check the following steps to set up a scan 1 2 3 4 5 6 SCAN NO Move the cursor here and press IRIS OPEN to enter the setup of SCAN Number Move the joystick to select a preset number 1 8 and press IRIS OPEN to confirm TITLE Move the cursor here and press IRIS OPEN to enter the setup of SCAN Title Check the detailed above in DOME TITLE settings LEFT LIMIT Move the cursor here and press IRIS OPEN to enter Move the dome to a defined position as left limit and press IRIS OPEN to save this left boundary RIGHT LIMIT Move the cursor here and press IRIS OPEN to enter Move the dome to a defined position as right limit and press IRIS OPEN to save this right boundary START Move the cursor here and press IRIS OPEN to start the current scan SCAN SPEED Move the cursor here and press IRIS OPEN to set up the scan speed ranging 1 30 45 AUTO CRUISE SEQUENCE MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA g2. IF MOTION DETECT gt AUTO TRACKING MOTION DETECT SCENE NO 1 EDIT SCENE IF EDIT AREA DELETE SCENE AUX ACTIVATE OFF CANCEL SEC 5 lt START gt BACK EXIT AREA EDIT AREA NO 1 lt AREA EDIT gt DELETE AREA DISPLAY OFF BACK EXIT The user can set up 8 motion detection scenes each scene with 4 detecting areas under this menu The alarm output will be triggered when moving objects enter these detecting areas SCENE NO Move the cursor here and press IRIS OPEN to enter the setup of Scene Number Move the joystick to select a preset number 1 8 and press IRIS OPEN to confirm lt EDIT SCENE gt Move the cursor here and press IRIS OPEN to enter Move the dome to a user defined detecting scene Press IRIS OPEN to confirm lt EDIT AREA gt Move the cursor here and press IRIS OPEN to enter the menu of AREA EDIT a AREA NO Move the cursor here and press IRIS OPEN to enter the setup of AREA Number Move the joystick to select a preset number 1 4 and press IRIS OPEN to confirm b lt AREA EDIT gt Move the cursor here and press IRIS OPEN to enter the setup of AREA EDIT The screen will display frame with Serial No The user can move the frame to the top left conner of the wanted detecting area and press IRIS OPEN to confirm Then move the joystick to adjust the size of the detecting area and press IRIS OPEN to confirm c DELETE Move the cursor here and press IR
3. c When the lt gt is on the INTERVAL move the joystick up or down to select the interval time between each preset d When the is on the last item move the joystick up or down to select edition mode as INS insert ok and delete Press IRIS OPEN when selecting INS to insert the settings into the position of current Serial No Press IRIS OPEN when selecting OK to override the settings of Current Serial No Press IRIS OPEN when selecting delete to delete the settings of the Current Serial No Press IRIS OPEN to save all the setting and press IRIS CLOSE to exit DELETE START Move the cursor here and press IRIS OPEN to delete start the current sequence 46 PATTERN TOUR MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt IFP RESTART FACTORY DEFAULTS HELP EXIT MOTION lt PRESET gt lt SCAN gt lt SEQUENCE gt i PATTERN lt ZONES gt lt TIMING ACTION gt lt MOTION DETECT gt lt AUTO TRACKING gt BACK EXIT PATTERN PATTERN 1 TITLE PATTERN 1 START SET DELETE BACK EXIT The dome supports 4 pattern tours and each pattern cover at most 10 Minutes of 500 commands Please check the following steps to set up a pattern 1 2 3 4 5 PATTERN NO Move the cursor here and press IRIS OPEN to enter the setup of Pattern Number Move the j
4. lt PASSWORD gt lt DOME TITLE gt lt ADVANCED gt lt OTHERS gt BACK EXIT a NN IDLE ACTION TIME 30SEC ACTION NONE BACK EXIT IDLE setting means if there is no command for the dome for a period of time the dome will run the actions as defined 1 TIME Move the cursor to TIME and press IRIS OPEN to enter and move the joystick up and dome to select among 30 sec 1 min 5 min 10 min and 30 min And press IRIS OPEN to confirm 2 ACTION Move the cursor to ACTION and press IRIS OPEN to enter Move the joystick to select the actions including NONE PRESET SCAN SEQUENCE PATTERN Press IRIS OPEN to confirm 28 ALARM MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt ff DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS IR LED IDLE lf ALARM PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt lt ADVANCED gt lt OTHERS gt BACK EXIT ALARM SETTING ALARM NO 1 CONTACT N O INPUT STATE OPEN ALARM MODE OFF ACTION NONE ALARM OUT OFF RESET TIME 10 SEC START TIME 00 00 STOP TIME 00 00 BACK EXIT The dome system has 2alarm inputs and 1 alarm output optional function When an alarm is received an input signal to the dome triggers the user defined action such as presets patterns etc and at meantime the alarm ou
5. C ADVANCED OTHERS BACK OTHERS C gt TEMP MODE AUTO PRESET FREEZE OFF AUTO FLIP ON MENU STYLE IMAGE 2 MENU OFF 5MIN DOME TITLE AZIMUTH ZERO BACK EXIT The user can set up TEMP MODE INTERNAL FAN PRESET FREEZE STOP TIME MENU OFF TIME and NORTH ZERO here under the menu of OTHERS TEMP MODE To set up the control mode of dome fans and heaters It includes three modes of AUTO FAN HIGH SPEED and FAN LOW SPEED PRESET FREEZE This feature freezes the scene on the monitor when going to a preset This allows smooth switching from one preset scene to another AUTO FLIP When the camera tilts downward and goes just beyond the vertical position the camera will rotate 180 degrees The user can press IRIS OPEN to enter and choose to turn on off this function MENU STYLE There are two menu modes ordinary and image to be selected according to user s preference STOP TIME To set up the time that dome will stops after receiving the last command Options include 5 15 30 60 Sec MENU OFF TIME To set up the time that OSD menu be off when no operations Options include 1 2 5 10 min NORTH ZERO To set up the due north of the dome pan 0 Move the cursor here and press IRIS OPEN to enter Move the joystick to control the dome to pan 0 and press IRIS OPEN to confirm 4 CAMERA MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SET
6. 22 4 OSD Menu Functions MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT 23 SYSTEM INFORMATION DOME ID 1234567890 ADDRESS 001 BAUDRATE 9600 N 8 1 PROTOCOL PELCO P TEMPERATURE 31C ALARM 000000 00 OTHERS BACK EXIT DISPLAY DOME TITLE OFF PRESET 5SEC MOTION 5 SEC ZONES 5 SEC DATE TIME ON PAN TILT 5 SEC OTHERS DISPLAY POSITION BACK EXIT DOME SETTINGS IR LED lt IDLE gt lt ALARM gt lt PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt lt ADVANCED gt lt OTHERS gt BACK EXIT CAMERA SETTING AUTO FOCUS ON DIGITAL ZOOM OFF BACKLIGHT OFF FREEZE OFF ZOOM SPEED NORMAL DAY NIGHT AUTO lt ADVAN CED gt BACK EXIT MOTION lt PRESET gt lt SCAN gt lt SEQUENCE gt PATTERN ZONES TIMING ACTION lt MOTION DETECT gt lt AUTO TRACKING gt BACK EXIT LANGUAGE MAIN MENU E ENGLISH INFORMATION gt DISPLAY SETUP gt DOM E SETTINGS gt lt C AMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT The language for the on screen menus is Selectable To change the display language Press Iris Open to enter selection All on screen menus are changed to the selected language SYSTEM INFORMATION MAIN ME
7. Unit mrm 4 4 Installation Procedures 105 105 Pendant mount Notice The wall and ceiling must be thick enough to install the expansion bolts and can bear 4 times the weight of the dome camera itself Wall mount Installation Procedures 1 Take out the bracket from the package as shown mark the installation hole positions on the wall referencing to the bottom of bracket o N 5 q e am Wall mount 2 Drill the hole and install 4 pieces of M8 expansion bolt into the hole 3 Take out the IR speed dome and put the cables through the bracket Use M5 screws to fix the bracket and dome body Pendant meunt di N i C i Linit mm 4 Use 4 pieces of M8 screw nuts with washer to fix the bracket on the wall Pendant mount Installation Procedures 1 Take out the bracket from the package as shown mark the installation hole positions on the ceiling referencing to the bottom of bracket 105 105 Pendant mount 2 Drill the hole and install 4 pieces of M8 expansion bolt into the hole Drill Installation Holes 3 Take out the IR speed dome and put the cables through the sockets on the bottom of the pendant bracket Use M5 screws to fix the bracket and dome body Pec red al nit bracki 7 310 Linit mm 4 Use screw nuts with washer to fix the bracket on the wall Notice Pendant bracket is not designed for outdoor installation If specially required
8. f DISPLAY POSITION lt DATE TIME gt lt DOME TITLE gt lt ZONES gt lt MOTION gt lt ALARM gt lt PAN TILT gt BACK EXIT Display setup allows the user to define the way to display the dome titles on the monitor The displayed titles are listed as follows DOME TITLE Indicate dome PRESET Indicate the dwell time for preset title MOTION Indicate the dwell time for auto function titles auto scan auto cruise pattern tour ZONES Indicate the dwell time for zone titles DATE TIME Display the current date and time PAN TILT Time to display PTZ info and zoom info ALARM Time to display alarm in out info IR LED INFO Time to display IR LED info PROMPT Display prompt info Two options for the Dome Title and Date Time OFF and ON Other setup selections include OFF Title will not be displayed when activated ON Title will be continuously displayed when activated 2 SEC Title will be displayed for 2 seconds after activation 5 SEC Title will be displayed for 5 seconds after activation 10 SEC Title will be displayed for 5 seconds after activation Move the cursor by joystick to the one you need to set and press lris Open to enter the item Move the joystick select the status and press Iris Open to confirm Titles can be placed anywhere on the monitor This feature allows you to customize the window of your monitor screen To set a title position Use the joystick to position the cursor in the DISPLAY POSI
9. it up and dome to adjust the figures Press IRIS OPEN to confirm TIME Move the cursor here and press IRIS OPEN to enter Move the joystick left and right to choose the time position and move it up and dome to adjust the figures Press IRIS OPEN to confirm SAVE CANCEL Move the cursor to SAVE and press IRIS OPEN to save the settings Move the cursor to DELETE and press IRIS OPEN to cancel the settings 31 PASSWORD ge MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS IR LED lt IDLE gt lt ALARM gt lt PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt lt ADVANCED gt lt OTHERS gt BACK EXIT PASSWORD lt EDIT PASSWORD gt ENABLE OFF BACK EXIT The dome features password protection function to prevent unanthorized changes to the dome settings If the PASSWORD function is enabled the operator can not access any dome setting without entering a valid password EDIT PASSWORD Move the cursor here and press IRIS OPEN to enter Please under the old password before set up the new password The initial password is 111111 ENABLE Move the cursor here and press IRIS OPEN to enter Move the joystick to select between ON and OFF The user need to enter the password when opening the
10. please do make sure the waterproof installation of the dome Dome Setting Before the dome is installed please finish the setup of the communication protocol baud rate and dome address Set the DIP switch inside the dome body The relative DIP switch site and connecting wires are diagramed below for reference VIDEO RS435 PONER ALIAM ALAR OUT SW1 Dip switch for the dome address SW2 Dip switch for the dome protocol 1 Protocol Setup Our IR speed dome supports three protocols including Pelco P Pelco D and HS All of them supports baud rate of 9600bps 4800bps 2400bps Set the No 1 4 dip switch for the protocol configuration SW2 1 SW2 2 SW2 3 SW2 4 micop on o om or on o Oooo 2 Baud Rate Setup Set the No 5 6 dip switch for the baud rate configuration pes 3 Dome Address Setup PELCO P amp PELCO D Protocol EN 1 0 o oO 1 e Hn e e re e n Hn e e Ww N e j elelee Ooju A e e CO OO e H NO NO NAO SO NA NA NA NA NO NO NR O W OINI D O BRl WIN FR oO NN ES 2 0 3 3 3 3 1 1 54 o 21 2 1 1 1 4 Cable Definition BNC Connector Power Connector Red R 485A Yellow 54558 BNC Connector Video Coaxial Cable Power Connector DC12V Red RS485A Yellow RS485B Operation Instructions 1 Main Functi
11. 1 8 for the timing action Press IRIS OPEN to confirm START To set up the start time for the defined motion within this time segment Press IRIS OPEN to confirm STOP To set up the stop time for the defined motion within this time segment Press IRIS OPEN to confirm MOTION To setup the motion that will be operated in this time segment The motion includes NONE PRESET 1 8 SCAN 1 4 SEQUENCE 1 4 and PATTERN 1 4 ON OFF Move the cursor here and press IRIS OPEN to enter to enable or disable this function Press IRIS OPEN to confirm COPY The user could set up each 8 segment of 7 days separately or can copy the finished setting for one day to the current day Move the cursor there and press IRIS OPEN to copy the settings BACK Press IRIS OPEN to save and be back to last menu NOTE It is not allowed to set up the same time segment during one day And the time segment can not exceed 00 00 During the timing action segment the defined action will be stopped if the user moves the dome If there is operation during the defined time segment the action will re activated as long as it is in the defined timing action segment 49 MOTION DETECT MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt 7 lt MOTION gt RESTART FACTORY DEFAULTS MOTION lt PRESET gt lt SCAN gt lt SEQUENCE gt lt PATTERN gt lt ZONES gt lt TIMING ACTION gt
12. 100 EXIT KEYBOARD RECEIVE 100 BACK EXIT COMMUNICATION TEST The dome can do self diagnosis for the communications between keyboard and speed dome The test needs to match with our software VK200 If the self testing is successfully finished via the software the system will show up the testing results as left diagram 39 TILT ANGLE MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt SETTINGS The user can set up the tilt angle under the menu of TILT ANGLE lt CAMERA gt lt MOTION gt RESTART Move the cursor to TILT ANGLE and press IRIS oe OPEN to the setup of tilt angle Move the EXIT DOME SETTINGS lt IR LED gt lt IDLE gt ALARM PRAVICY MASK gt CLOCK PASSWORD C lt ADVANCED gt lt OTHERS gt BACK joystick up and down to select the angle and press the IRIS OPEN to confirm ADVANCED lt AUX gt lt SOFT LIMIT gt lt DOME SPEED gt lt POWER ON ACTON gt lt CAMERA gt lt COMMUNICATION TEST gt c lt TILT ANGLE gt BACK EXIT TILT ANGLE SETTINGS CF TILT ANGLE 5 BACK EXIT OTHERS MAIN MENU LANGUAGE ENGLIS SYSTEM INFORMATION DISPLAY SETUP C lt DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt lt ALARM gt lt PRAVICY MASK gt lt CLOCK gt lt PASSWORD gt
13. ASSWORD C ADVANCED OTHERS BACK ADVANCED AUX SOFT LIMIT DOME SPEED POWER ON ACTON gt CP CAMERA COMMUNICATION TEST TILT ANGLE BACK CAMERA CP BAUDRATE 9600 PATITY NONE TEST EXIT BACK EXIT CAMERA The dome can automatically recognize the main camera modules in the market For the cameras it can not recognize the user can set up here CAMERA Move the cursor here and press IRIS OPEN to enter the setup mode Move the joystick up and down to select the camera types Press IRIS OPEN to confirm BAUDRATE Move the cursor here and press IRIS OPEN to enter the setup mode Move the joystick up and down to select the baudrate Press IRIS OPEN to confirm PARITY Move the cursor here and press IRIS OPEN to enter the setup mode Move the joystick up and down to select the parity mode Press IRIS OPEN to confirm 38 MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt C lt DOME SETTINGS lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt ALARM PRAVICY MASK gt CLOCK PASSWORD c ADVANCED OTHERS BACK ADVANCED AUX SOFT LIMIT DOME SPEED POWER ON ACTON gt CAMERA CP COMMUNICATION TEST TILT ANGLE BACK COMMUNICATION TEST KEYBOARD gt DOME 100 100 KEYBOARD lt DOME 100 100 DOME RECEIVE
14. EN to move the selected character to the INPUT position at lt After finishing the character inputs move the cursor to OK and press IRIS OPEN to confirm Also user can move the cursor to CANCEL to cancel the character input settings 33 MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt C DISPLAY SETUP DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt lt ALARM gt lt PRAVICY MASK gt lt CLOCK gt lt PASSWORD gt C lt ADVANCED gt lt OTHERS gt BACK ADVANCED Cr lt AUX gt lt SOFT LIMIT gt lt DOME SPEED gt lt POWER ON ACTON gt lt CAMERA gt lt COMMUNICATION TEST gt lt TILT ANGLE gt BACK CZAUX1 OFF AUX2 OFF BACK EXIT AUX The user can set up the auxiliary output to trigger other devices from an alarm or a controller Move the cursor to AUX and press IRIS OPEN to enter to select ON or OFF to enable or disable this function 34 MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt lt ALARM gt lt PRAVICY MASK gt lt CLOCK gt lt PASSWORD gt Cg ADVANCED OTHERS BACK ADVANCED AUX Cg SOFT LIMIT DOME SPEED POWER ON ACTON gt CAMERA COMMUNICATI
15. ESET MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt i RESTART FACTORY DEFAULTS HELP EXIT NENNEN MOTION PRESET SCAN SEQUENCE PATTERN ZONES TIMING ACTION lt MOTION DETECT gt lt AUTO TRACKING gt BACK EXIT PRESET PRESET NO 001 TITLE PRESETO1 CALL SET DELETE SPEED HIGH BACK EXIT The dome supports 256 presets Please check the following steps to set up a preset 1 2 3 4 5 6 PRESET NO Move the cursor here and press IRIS OPEN to enter the setup of Preset Number Move the joystick to select a preset number 1 64 and 100 255 and press IRIS OPEN to confirm TITLE Move the cursor here and press IRIS OPEN to enter the setup of Preset Title Check the detailed above in DOME TITLE settings SET Move the cursor here and press IRIS OPEN to enter Move the dome to a defined position as preset point and press IRIS OPEN to save the preset position CALL Move the cursor here and press IRIS OPEN to call up the current preset DELETE Move the cursor here and press IRIS OPEN to delete the current preset SPEED Move the cursor here and press IRIS OPEN to set up the preset call up speed of LOW MID and HIGH 44 AUTO SCAN MAIN MENU LANGUAG E ENGLISH SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS
16. HD SDI SPEED DOME CAMERA USER S MANUAL V3 0 Table of Contents 2 FO AUF OS 3 OCMC aN 9 stallat 10 1 5 20 1 Precaution 1 Please read this manual carefully before the installations and operations 2 Transportation Security No heavy stress violent vibration or water splash are allowed during transportation storage The unit should be transported in separated packing In shipments of distributor and delivery of maintenance any damages caused by integral packing are not covered by warranty 3 Installation Avoid heavy stress and violent vibration during installation Don t touch the dome cover directly by hand When connecting the power source please follow all electric safety standards and only use the power supply designated for this device Keep the video and control signal in a decent distance from high voltage devices and cable Don t apply power to dome before finishing the installation 4 Internal Environment Keep metal and inflammable material away from dome body to avoid fire short circuit and damage Please prevent all liquids material from entering the dome If this occu
17. IS OPEN to delete the current detecting area d SENSITIVITY Move the cursor here and press IRIS OPEN to enter Select among LOW MID and HIGH and press IRIS OPEN to confirm the sensitivity e DELETE SCENE Move the cursor here and press IRIS OPEN to delete the current scene f AUX ACTIVATE The dome can activate the alarm aux output when detecting the moving object Press IRIS OPEN to enter and select between ON and OFF to activate or deactivate this function g CANCEL SEC Here means when the alarm aux output is activated by the detecting function for how long it will last before the aux output will be closed The time ranging 1 60 Sec h START Move the cursor here and press IRIS OPEN to start the function of motion detection 50 AUTO TRACKING MAIN MENU LANGUAG E ENGLISH SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS lt CAMERA F MOTION RESTART FACTORY DEFAULTS HELP EAIT MOTION lt PRESET gt SCAN SEQUENCE lt PATTERN lt ONES gt lt TIMING ACTIONS MOTION DETECT 5 AUTO TRACKING gt BACK EXIT AUTO TRACKING SENSITIVITY MID TARGET MID ZOOM AUX OFF ENABLE OFF I TRACKING SCENE SET BACK EXI I QW a 9 ni TRACKING SCENE SET TRACKING SCENE SET DELETE RETURN DELAY 10SEC BACK E
18. NU E ENGLISH INFORMATION lt DISPLAY SETUP gt DOM E SETTINGS lt C AMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT SYETEM INFORMATION C DOME ID 1234567890 ADDRESS 001 BAUDRATE 2400 PROTOCOL PELCO D TEMPERATURE 31 VOLTAGE 12 0V ALARM 000000 00 OTHERS BACK EXIT OTHERS CP VERSION V220ST TILTE SDI DOME DARE 2009 01 01 TIME 10 20 00 TEMP SCALE CELSIUS BACK The user can check the dome system information as required The system information includes Dome ID dome address baud rate protocol temperature voltage alarm info dome title version date time and temperature scale Use the following steps to display the System Information screens 1 Use the joystick to position the cursor along the SYSTEM INFORMATION 2 Press Iris Open The SYSTEM INFORMATION screen opens 3 Mover the joystick up and town to select the item 4 Press Iris Open to enter the setup of each item 24 DISPLAY SETUP MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt i DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DISPLAY DOME TITLE OFF PRESET 5 SEC MOTION 5 SEC ZONES 5 SEC DATE TIME O N PAN TILT 5 SEC f OTHERS DISPLAY POSITION BACK EXIT DISPLAY ALARM 5 SEC IR LED INFO 5SEC PROMPT ON BACK EXIT
19. ON TEST TILT ANGLE gt LIMIT SETTING 55 SOFT LIMIT OFF lt LEFT LIMIT gt lt RIGHT LIMIT gt LIMIT DELETE BACK EXIT SOFT LIMIT The user can set up the soft limit to define the left and right boundaries for the pan movement SOFT LIMIT Move the cursor here and press IRIS OPEN to enter Now the joystick to select ON or OFF to ennable or disable this function LEFT LIMIT Move the cursor here and there IRIS OPEN to enter Now the user can move the joystick to control the PAN movement of the dome to a defined positon for the left limit Press IRIS OPEN to confirm RIGHT LIMIT Move the cursor here and press IRIS OPEN to enter Now the user can move the joystick to control the PAN movement of the dome to a defined position for the right limit Press IRIS OPEN to confirm LIMIT DELETE Move the cursor here and press IRIS OPEN to delete all the settings 35 MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt CP DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt ALARM PRAVICY MASK gt CLOCK PASSWORD 55 ADVANCED OTHERS BACK ADVANCED AUX SOFT LIMIT gt DOME SPHED gt lt POWER ON ACTON gt lt CAMERA gt lt COMMUNICATION TEST gt lt TILT ANGLE gt DOME SPEED SETTING 55 DOME SPEED 180 BACK EXIT DOME SPEED To m
20. OSD under the status of ENABLE ON 32 DOME TITLE MAIN MENU LANGUAG E ENGLISH SYSTEM INFORMATION DISPLAY SETUP 7 DOME SETTINGS Ep lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt ALARM PRIVACY MASK CLOCK PASSVVORD lt ADVANCED gt 55 OTHERS BACK EXIT OTHERS TEMP MODE AUTO PRESET FREEZE OFF AUTO FLIP ON BROADCAST ON MENU STYLE IMAGE2 STOP TIME 30 SEC MENU OFF 5 MIN DOME TITLE lt AZIMUTH ZERO BACK EXIT DOME TITLE SET INPUT CAPS ABCDEFGHIJ K LMN O PQR ST UVWAYZ OK CANCEL The user can set up the dome title to define each camera Dome title support up to 12 characters Move the cursor according the left steps and select INPUT Press IRIS OPEN to enter 1 3 4 5 6 t Move the joystick left and right to position lt and press IRIS OPEN to delete the character at lt Press IRIS CLOSE to exit the edit mode Move the cursor to CAP and press IRIS OPEN to enter Move the joystick up and down to select the input method such as English Cap English Chinese Figures and Symbols Mover the cursor to next line of CAP and press IRIS OPEN to enter the mode of character input The selected character will be shown in high brightness Move the joystick up down left right to choose the needed characters Press IRIS OP
21. Only for camera with menu Call upon preset No 95 to enter into OSD menu setup interface Press Focus to choose menu items and press Iris to set menu contents 3 Technical Specifications Power Supply Night IR Distance Manual Speed Preset Speed Pan Angle Tilt Angle Presets Positions Preset Accuracy Auto Scan Auto Cruising Pattern Tour Guard Location IR LED On Mode Data Communication Protocols Camera Module Baud Rate Operating Humidity Operating Temp DC12V 10 50W 120 150 180meters Pan 0 01 180 Tilt 0 01 100 high speed Pan 0 5 35 S Tilt 0 5 35 S Vair speed 360 S high speed 35 S Vari speed 360 continuous pan rotation 90 Auto Flip 256 0 1 8 auto scan tracks user defined left and right boundaries and scan speed 8 cruising tracks each cruising tracks has 32 preset positions user defined dwell time 4 groups each one with 10 Mins memory 500 programmable instructions The dome will rotate back to preset position after a period of vacant time Manual Auto Timing RS 485 Auto Compatible PELCO P PELCO D Auto Compatible SONY LG Samsung CNB HITACH etc 2400 4800 9600bps 0 90 35 60 C 4 Installation Guide 4 1 Preparations 1 Basic Requirements All the electric work must be finished under the latest electric amp fire prevention law and rules and any related law and rules Please check according to the packing list i
22. RA the setup of Mask Number of the privacy zone lt MOTION gt RESTART FACTORY DEFAULTS MAIN MENU ENABLE To enable or disable this privacy mask function HELP SET Move the cursor here and press IRIS OPEN to enter the mode of setting the privacy mask Move the joystick Left Right Up Down on the screen to set up the privacy zone and press IRIS OPEN to confirm DOME SETTINGS EXIT lt IR LED DELETE Move the cursor here and press IRIS OPEN to delete IDLE the current No of privacy mask zone ALARM PRIVACY MASK gt lt CLOCK gt PASSWORD DOME TITLE ADVANCED OTHERS BACK EXIT NENNEN PRIVACY MASK MASK NO 1 ENABLE ON SET DELETE BACK EXIT 30 CLOCK MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt i gt lt DOME SETTINGS lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT NENNEN DOME SETTINGS IR LED IDLE lt ALARM gt lt PRIVACY MASK gt f lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt lt ADVANCED gt lt OTHERS gt BACK EXIT DATE TIME DATE 2009 01 01 TIME 12 00 SAVE CANCEL The dome can display the data and time And the user could enter this CLOCK menu to set up the DATE and TIME DATE Move the cursor here and press IRIS OPEN to enter Move the joystick left and right to choose the date position and move
23. TINGS gt 5 lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT CAMERA SETTING CF FOCUS MODE AUTO DIGITAL ZOOM OFF BACKLIGHT OFF PICTURE FLIP OFF ZOOM SPEED NORMAL DAY NIGHT AUTO lt ADVANCED gt EXIT BACK The user can make adjustment for the cameras under this menu FOCUS MODE AUTO FOCUS allows the camera lens to remain in focus during zooming in zooming out and pan tilt movement Move the cursor here and press IRIS OPEN to enter Setup the mode AUTO or OFF and press IRIS OPEN to confirm When auto focus is off the user needs to do manual focus DIGITAL ZOOM Move the cursor here and press IRIS OPEN to enter Setup the function to be ON or OFF BACKLIGHT Move the cursor here and press IRIS OPEN to enter Setup the function to be ON or OFF PICTURE FLIP To set up the Tilt flip for the dome Move the cursor here and press IRIS OPEN to enter Setup the function to be ON or OFF ZOOM SPEED To set up the zoom speed of Low Normal and high when doing the zoom in and out Move the cursor here and press IRIS OPEN to enter Move the joystick to choose and press IRIS OPEN to confirm DAY NIGHT To set up the day and night mode of AUTO CLOUR and B W Move the cursor here and press IRIS OPEN to enter Move the joystick to choose and press IRIS OPEN to confirm 42 CAMERA ADVANCED MAIN MENU LANGUAG E ENGLISH l
24. TION Press Iris Open Use the joystick to move the title up down left or right Press Iris Open Repeat steps 1 through 4 to position other titles Position the cursor at BACK or EXIT Press Iris Open to save settings and exit menu AUNE 25 IR LED MAIN MENU LANGUAG E ENGLISH SYSTEM INFORMATION DISPLAY SETUP gt i DOME SETTINGS CAMERA MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS 1 IR LED IDLE ALARM PRIVACY MASK gt ZCLOCK PASSWORD DOME TITLE ADVANCED OTHERS BACK EXIT IR LED SETTING LF CONTROL MODE AUTO SENSITIVITY ale IR LED POWER gt AUTO CONTROL OFF lt AUTO CONTROL ADVANCED BACK EXIT IF LED POWER rt POWER MODE USER BACK EXIT IR AUTO CONTRCL STANDBY POWER BCS9S STANDBY DELAY 10 SEC SENSITIVITY MID BACK EXIT ADVANCED SET ENHANCED MODE STATIC START TIME 13 00 STOP TIME 06 00 BACK EXIT The user can open and close the IR LED manually and set up the IR LED work mode under this OSD mean Under normal operation mode the user can press IRIS OPEN and IRIS CLOSE to adjust the IR LED power 1 CONTROL MODE AUTO IR LED will be opened or closed automatically according to the light conditions TIMING LED will be adjusted according to Open and Close Time OPEN IR LED forcedly open CLOSE IR LED forcedly close CAMERA IR LED status Open Close will be synchroni
25. XIT Under the auto tracking mode the dome will auto track the moving objects entering the scene When the object is moving out of the scene the dome will return to a preset position as defined after the defined time SENSITIVITY The user can set up the auto tracking sensitivity under this menu When set as LOW the dome will do auto tracking when obvious object entering the screen When set as HIGH the dome will do auto tracking when small object moving into the screen Move the cursor there and press the IRIS OPEN to enter The options include LOW MID and HIGH TARGET To set up the size of the tracking object The options include Large MID and SMALL AUX If set ON here the object auto tracking will activate alarm aux output at the same time Press IRIS OPEN to enter to select ON Or OFF ZOOM MATCH Under the auto tracking model if turn on the function of ZOOM MATCH the dome will do zooming in and out during auto tracking to keep the right proportion between the object and background Move the cursor there and press the IRIS OPEN to enter And move the joystick to select the optical zoom ENABLE Move the cursor here and press IRIS OPEN to enter to select ON or OFF to enable or disable this function 51 TRACKING SCENE SET wen Nie TRACKING SCENE SET Here the user can set up the scene that the LANGUAG E ENGLISH e SYSTEM INFORMATION dome will get back to when finishing the action of auto t
26. ake a selection of the dome speed the user can enter this menu to set up Move the cursor to BACK EXIT and press IRIS OPEN to run the command of BACK or EXIT 36 MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt i DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS IR LED lt PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt IZ ADVANCED OTHERS BACK EXIT ADVANCED SOFT ADDRESS SET lt AUX gt lt SOFT LIMIT gt lt DOME SPEED gt IZ POWER ON ACTION CAMERA COMMUNICATION TEST BACK EXIT f POWER ON ACTION POWER ON ACTION NONE BACK EXIT POWER ON ACTION The user can define the dome action when power on Move the cursor to POWER ON ACTION and press IRIS OPEN to enter the mode of setup NONE default No action PRESET Dome goes to preset Default as Preset 1 SCAN Dome starts auto scan Default as Auto Scan 1 SEQ Dome runs auto cruise Default as Auto Cruise 1 PATTERN Dome runs pattern Default as Pattern 1 oT MAIN MENU LANGUAGE ENGLIS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt C lt DOME SETTINGS lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HEIP EXIT DOME SETTINGS lt IR LED gt lt IDLE gt ALARM PRAVICY MASK gt CLOCK P
27. al temperature sensor PWM cooling fan vari speed temperature control e HD SDI transfer mode no IP transmission process of compressed packet and image distortion with higher data security e Support PELCO P PELCO D protocol e Multiple compatible camera brands including Sony HITACHI LG CNB etc e 7 alarm inputs 2 alarm outputs e256 preset positions 8 cruising tracks each cruising track has 32 presets e 4 pattern tours each can record 500 programmable instructions or 600s path e 8 auto scan with use defined left and right boundaries and settable scan speed e 8 Privacy Zones with defined English camera title e Guard Location the dome will rotate back to preset position automatic scan automatic cruise after a period of vacant time e Alarm triggering the alarm can trigger preset auto scan cruising and pattern tour functions e Soft Address Function the use can set up the dome address without uninstall the dome 2 2 Integrated Super Speed PTZ Rotator e Delicate stepping motor stable sensitive and accurate e Integratesd design compact strcture e 360 continuous Pan rotation and 10 90 Tilt range auto flip without blind area e Stepless speed change auto zoom speed matching e Manual speed 0 01 180 7s the highest cruise up to 3607 s 2 3 Built in High Definition Corlor Camera e Auto iris auto back light compensation Auto manual white balance e Auto manual brightness control e Auto manual focus eHigh defini
28. confirm TITLE Move the cursor here and press IRIS OPEN to enter the setup of Zone Title Check the detailed above in DOME TITLE settings LEFT LIMIT Move the cursor here and press IRIS OPEN to enter Move the dome to a defined position as left limit and press IRIS OPEN to save this left boundary RIGHT LIMIT Move the cursor here and press IRIS OPEN to enter Move the dome to a defined position as right limit and press IRIS OPEN to save this right boundary DELETE Move the cursor here and press IRIS OPEN to delete the current zone 48 TIMING ACTION lt CAMERA gt i lt MOTION gt RESTART HELP EXIT lt PRESET gt lt SCAN gt lt PATTERN gt lt ZONES gt BACK EXIT NO START ONOaRWN e e O MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt FACTORY DEFAULTS lt SEQUENCE gt IF TIMING ACTION lt MOTION DETECT gt lt AUTO TRACKING gt TIMING ACTION STOP MOTION MOTION NONE NONE NONE NONE NONE NONE NONE NONE BACK TIMING ACTION allows the user to set up the actions of the dome in 7 days each day with 8 timing segments When fishing the setup the dome will do the actions according to the setup motion during the defined time segment NO Here shows the day within a week Move the cursor here and press IRIS OPEN to enter Move joystick up or down to select the Serial No
29. ect between STATIC and DYNAMIC 9 START STOP TIME Set up time for IR LED to open and close under TIMING of control mode 26 WIPER MAIN MENU LANGUAGE ENGLISH SYESTEM INFORMATION Cr DISPLAY SETUP DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELP DOME SETTINGS lt IR LED gt 5 lt WIPER gt lt IDLE gt lt ALARM gt lt PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt ADVANCED gt lt OTHERS gt BACK WIPER SETTINGS C NUMBER 03 SPEED MID AUX ON AUX 1 RESET ACTIVATE The user can make adjustment for the wiper under this menu suitable for wiper equipped dome 1 Numbers Move the cursor to NUMBER and press IRIS OPEN to enter the setup of Wiper Number Move the joystick up and down to select number 1 10 then press IRIS OPEN to confirm 2 Speed Move the cursor to SPEED and IRIS OPEN to enter the setup of Wiper speed Move the joystick up and down to select HIGH MID OR LOW the press IRIS OPEN to confirm 3 Start Move the cursor and press IRIS OPEN to start wiper NO 71 preset is available to start wiper 27 IDLE MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt i DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT DOME SETTINGS IR LED lf IDLE ALARM PRIVACY MASK lt CLOCK gt
30. f every accessory is included And also make sure the installation is operated as required Please contact us for any help during the installation 2 Installation Space and Density Checkup Please make sure the space is big enough to install our dome And also ensure the density of the ceilings or walls to hold total weight of the dome and its accessories 3 Cables Preparation Please choose the proper cable according to the transmission distance The min requirement of coaxial BNC cable is listed as follows for reference 4 Setup Dip Switch for Dome Address Please turn to Max Distance Feet Meter Part 5 for details RG59 U 750ft 229m RG6 U 1 000ft 305m RG11 U 1 500ft 457m 4 2 Installation Method The IR speed dome could be installed in wall mount and pedant mount po 354 Power adapter bracket Protective sling Dome housing Dome body rack t Aluminum radiator 4 3 Installation Dimensions Wall Mount 34 1 4 Prei adapter bracket Protective sing Dema Hiei Dore bhy rick Auminum adalar 4 29 125 105 i 100 as 100 78 Ss eas 4 Wall mount e 1 105 Pendant mount 125 100 i i Pendant mount Ape I e brac et C L C4 77 N Am Sa eo 228 Unit mm Wall mount Pendant Mount Pendani mount PACE dimi Es m 220 i 510
31. ons Fast Call Up Our IR Soeed dome supports 220 preset positions You can activate some special functions by calling upon code number 65 99 1 Start Auto Scan Call 99 Default to start auto scan of group No 1 2 Start Auto Cruise Call 98 Default to start auto cruise of group No 1 3 Start Pattern Tour Call 97 Default to start pattern tour of group No 1 A f ES star nuto sanol Call 80 Call pp Call 99 pp means Group No 1 8 5 Start Auto Cruise of AC cS Group No pp 21 Start Pattern Tour of II 80 Call pp Call 97 E WE CU OpenOSDMenu OSD Menu Set 95 Cor Call 95 A Recover Factory Default Call 82 2 System Self Testing The dome will do self testing after power up and system status will show Normal if system Is running normally If error happens testing result will be shown in O or X O means normal and X means error Please check the wicca meaning as follows SerialNo 1 0 22 3 45 6 Storage Pan Tilt Camera 3 OSD Menu Operations Call Preset 95 to enter the main OSD menu or call preset No 1 two times continuously within two seconds Control the joystick to move the cursor around the menu Press Iris Open to enter the menu for selections Move the joystick up and down to select the item Press Iris Open to confirm the selection Press Iris Close to cancel the selection Note If your controller does not have a joystick use the up or down key
32. oystick to select a pattern number 14 and press IRIS OPEN to confirm TITLE Move the cursor here and press IRIS OPEN to enter the setup of Pattern Title Check the detailed above in DOME TITLE settings SET Move the cursor here and press IRIS OPEN to enter Move the dome up down left right make the zoom in out and press IRIS OPEN to save the pattern tour START Move the cursor here and press IRIS OPEN to start the current pattern tour DELETE Move the cursor here and press IRIS OPEN to delete the current pattern tour 47 ZONES MAIN MENU LANGUAG E ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt i RESTART FACTORY DEFAULTS HELP EXIT MOTION lt PRESET gt lt SCAN gt lt SEQUENCE gt lt PATTERN gt I lt ZONES gt lt TIMING ACTION gt lt MOTION DETECT gt lt AUTO TRACKING gt BACK EXIT ZONES ZONE IS NOT SET ZONE NO 1 TITLE ZONE 1 LEFT LIMIT RIGHT LIMIT DELETE BACK EXIT The use can set up zone title when the camera moves to a defined location which will make it much easier for the user to identify the location The dome supports 8 zone titles Please check the following steps to set up a zone 1 2 3 4 5 ZONE NO Move the cursor here and press IRIS OPEN to enter the setup of Zone Number Move the joystick to select a zone number 1 8 and press IRIS OPEN to
33. racking DISPLAY SETUP gt Move the cursor here and press IRIS OPEN to enter Move the dome lt DOME SETTINGS gt lt CAMERA gt to the wanted scene and press IRIS OPEN to confirm lt MOTION gt If RESTART FACTORY DEFAULTS DELETE Move the cursor here and press IRIS OPEN to delete the return scene HELP EXIT RETURN DELAY To set up the time that dome will waiting to return to p7 this scene P RESTART WARNING The dome allows the user to reset its settings remotely under this menu ARE YOU SURE Move the cursor here and press IRIS OPEN to enter Select OK or CANCEL to continue the reset or cancel the reset OK CANCEL 52 FACTORY DEFAULTS MAIN MENU FACTORY DEFAULTS will allow the user to recover all the setting to LANGUAG E ENGLISH factory default setting SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS Move the cursor here and press IRIS OPEN to enter CAMERA Select OK or CANCEL to continue the reset or cancel the reset lt MOTION gt RESTART i FACTORY DEFAULTS HELP EXIT ft WARNING ARE YOU SURE OK CANCEL 53
34. rections Display User can define the dome s direction of due north which will help to show up the exact moving directions on screen And zone title is supported to display when the dome moves to the specified zone e Auto Tracking The dome will automatically fix and track the moving object according to the user s setup via OSD e Motion Detection The dome will detect the changes in the defined video zone and trigger alarm It supports to 8 video Locations each with 4 detection zones e PTZ and Lens Control 1 Zoom Control Users can control zoom by keyboard to get near or far images 2 Focus Control The default setting is auto focus The camera will auto focus based on the center of the video display to get the clear image In some special occasions the user could do the manual focus to get the desired image effect 3 Auto Iris Control Auto lris is aiming to detect the environmental lights condition and adjust the iris to get the stabilized brightness of the image 4 Auto Back Light Compensation In the highly bright background auto back light compensation is aiming to compensate the brightness of the dark object and adjust the background brightness to get a clear image 5 Auto Manual White Balance Auto Manual WB adjust depending on the environment light changes 6 Day and Night Switch Only for Day Nigh Camera Speed dome camera can auto switch according to the environmental SSS illumination changes 7 OSD Setup
35. rom one position to the next in a cycle at a set speed This feature is called the auto cruise The cruise sequence and dwell time of each preset can be set It supports up to 8 cruising tracks each cruising track with 32 presets e Pattern Tour Dome can memorize 600s running path or 500 programmable instructions When start pattern tour speed dome will move automatically according recorded action path It supports 4 groups of pattern tours e Guard Location The dome will automatically return to preset position if there is no operation in a period of vacant time e Default Action When you start up the dome camera or do not send commands over a long time the dome camera will return to its default functions which include the home place auto pan auto cruise and pattern e Dome Address Setup The dome supports up to 256 addresses and the dome will only response to the instructions given to its own address Please check the dip switch on the bottom of the dome for address setup e Manual Object Tracking The use can move the joystick up down left or right to track the appearing object in the screen and use the joystick to zoom in and out with auto focus e Privacy Mask Protection Set black mask areas to protect the privacy zones The black privacy locations can be set and support up to 8 mask zones e Timing Running Function Users can set speed dome operation task at total 8 timing areas during 7 days e Coordinates and Di
36. rs please shut down the power and pull out the plug in Then please inform the technical personnel immediately 5 Electrical Safety The video image would be interfered when the dome is installed near Television radio transmitter voltage changer and audio amplifier 6 Camera Protection Avoid shooting very bright objects directly into the camera s CCD such As the sun or light fittings and avoid fixating the camera lens on bright static object for long time as it will cause Irreparable damage to the camera s CCD 7 Cleaning Method Please don t use abrasive and violent detergent to clean the dome Please choose dry fabric and neutral detergent And please use lens paper to clean the lens 8 Internal removing assembly repair and operations should be only performed by qualified service personnel 9 Please use our production under the following environmental standards Environmental Temperature 35 60 C Power Supply DC12V 5A 2 Features 2 1 Main Features e The lowest manual speed 0 01 S smoothly running the highest cruise speed 360 S precise positioning e Powerful video analysis support auto object tracking Auto Track Model and motion detection alarm e 3D positioning to achieve screen coordinates and partial zoom in out with specified master device e Build in precision RTC clock for timing actions with 7 days of programmable schedule not for vari speed dome eBuilt in Semi conductor heater amp digit
37. t IF RESTART FACTORY DEFAULTS HELP EXIT MOTION lt PRESET gt lt SCAN gt i SEQUENCE lt PATTERN gt lt ZONES gt lt TIMING ACTION gt lt MOTION DETECT gt lt AUTO TRACKING gt BACK EXIT SEQUENCE SEQ NO 1 TITLE SEQ 1 START f SEQUENCE SET DELETE BACK EXIT SEQUENCE PESET INTERVAL 002 03 001 03 NO gt gt 01 02 03 04 05 06 4 01 003 03 INS BACK EXIT The dome supports 8 groups of auto cruise and each cruise supports 32 presets Please check the following steps to set up cruise 1 2 3 4 SEQ NO Move the cursor here and press IRIS OPEN to enter the setup of Sequence Number Move the joystick to select a preset number 1 8 and press IRIS OPEN to confirm TITLE Move the cursor here and press IRIS OPEN to enter the setup of Sequence Title Check the detailed above in DOME TITLE Settings lt SEQUENCE SET gt Move the cursor here and press IRIS OPEN to enter Move the cursor to EDIT and press IRIS OPEN enter edit mode of sequence Move the joystick left and right to select each item a When the lt gt is on the item NO move joystick up or down to select the Serial NO of the preset in a sequence There are up to 32 presets in each sequence b When the lt gt is on the item PRESET move the joystick up or down to select the preset NO that the user wants to add in the sequence
38. t SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT NENNEN NN CAMERA SETTING FOCUS MODE AUTO DIGITAL ZOOM OFF BACKLIGHT OFF PICTURE FLIP OFF FREEZE OFF ZOOM SPEED NORMAL DAY NIGHT AUTO ip lt ADVAN CED gt BACK EXIT Tr l ADVANCED WB AUTO RED GAIN 208 BLUE GAIN 167 BRIGHT 01 EXPOSURE AUTO WIDE DYNAMIC OFF BACK EXIT The use can set up more detailed parameters of camera here under the menu of CAMERA ADVANCED WB To set up the white balance of the camera Options include AUTO MANUAL INDOOR and OUTDOOR The use can select different mode according the different locations RED GAIN Only can be adjusted whet WB set as manual BLUE GAIN Only can be adjusted whet WB set as manual BIRGHT To set up the brightness of the image Move the cursor here and press IRIS OPEN to enter Move the joystick to adjust and press IRIS OPEN to confirm EXPOSURE To set up the exposure mode of the camera Options include AUTO MANUAL SHUTTER PRIORITY IRIS PRIORITY and BRIGHT PRIORITY The use can select different mode according the different locations WIDE DYNAMIC Wide dynamic range WDR balances the brightest and darkest sections of a scene to produce a picture that is perfectly balanced in light and clarity Available settings are OFF LOW MID and HIGH The default setting is OFF 43 PR
39. ton corlor camera 720P 1080P eOptional multi zoom cameras 2 4 All weather Outdoor Design e 6 Inch High die cast alloy aluminum construction High Precision Mould with high heat conductivity e Fully enclosed isolation design for heat sink e Nanometer Dustproof waterproof and fog proof lens e P66 Waterproof e 3000V lightning and surge current protection 2 5 Function Instructions e Focus PTZ Speed Auto Match The pan tilt rotation speed could be automatically adjusted according to the focus in out which makes it much more practical for manual target tracking Only for the auto tracking IR speed dome e Auto Flip When the camera tilts downward and goes just beyond the vertical position the camera will rotate 180 degrees e Preset Position Set up and Call Up In the Preset function the dome stores the current pan tilt angle zoom and other position parameters in its memory When necessary the dome recalls these parameters and adjusts the camera to a particular position The user can store recall and clear the presets easily and promptly by using the keyboard controller The dome can store up to 220 presets e Auto Scan Users can set up the left and right boundaries by control keyboard Then speed dome can scan between this boundary It supports up to 8 groups of scanning paths e Cruising Track The preset position can be programmed to be recalled in a set of sequences This sequence can be set to let the camera scan f
40. tput signals is activated ALARM NO Move the cursor to the ALARM NO Press IRIS OPEN to enter and move the joystick up and down to select the alarm input no Channel 1 and Channel 2 INPUT STATE Set the alarm contact status There are two input states OPEN and CLOSE OPEN normally open CLOSE normally close ALARM MODE OFF Alarm function is deactivated ON Alarm function is activated AUTO AUTO Alarm function will be activated and deactivated between START TIME and STOP TIME ACTION Set the alarm action NONE default No action PRESET Dome goes to preset Default as Preset 1 SCAN Dome starts auto scan Default as Auto Scan 1 SEQ Dome runs auto cruise Default as Auto Cruise 1 PATTERN Dome runs pattern Default as Pattern 1 ALARM OUT Set the auxiliary to activate OFF Not alarm output will be activated OUT1 An alarm action will close AUX 1 output OUT2 An alarm action will activate AUX2 output RESET TIME Set up time for the alarm output such as an alarm buzzed when is triggered by the detector START STOP TIME Set up the time to start alarm and stop alarm ONLY under the AUTO mode under ALARM MODE 29 PRIVACY MASK Privacy mask allows the user to mask the privacy areas with LANGUAG E ENGLISH black frame The user can set up 8 privacy masks at most SYSTEM INFORMATION DISPLAY SETUP gt MASK NO Move the cursor here and press IRIS OPEN to enter i DOME SETTINGS CAME
41. zed with Camera day and night switching 2 SENSITIVIRY Here the user can manually set the sensitivity from 1 5 The smaller the number is the lower light of the environment will be when the IR LED on 3 IR LED POWER Here the use can choose the power mode covering NORMAL MATCH and USER NORMAL Near IR LED will be turned on when wide angle and Far IR LED will be turned on when small angle MATCH The Near and Far IR LED will be turned on and off automatically to match the zoom in and out USER The user can manually adjust the Near and Far IR LED 4 AUTO CONTROL When it is on the IR LED will turn its power consumption to the standby status which will effectively extend the service life of IR LEDs And under this mode when objects appear in the screen the IR LED will turn its power consumption back to the normal status 5 STANDBY POWER When the AUTO CONTROL is on the user can set up the standby power here 6 STANDBY DELAY Set up how long if there is not moving object the IR LED will turn into standby status 7 SENSITIVITY When the AUTO CONTROL is on the user can set up the sensitivity to detect the moving objects 8 ENHANCED MODE Under normal status press IRIS OPEN to enhance the IR LED power when it is turned to maximum press IRIS OPEN continuously for 2 seconds to enter the enhanced mode And the whole brightness of the image will be improved Move the cursor to EHNANCED MODE and press IRIS to enter and sel
Download Pdf Manuals
Related Search