www.dvsbg.com car audio & multimedia system
Contents
1. data generated at the time of the accident and displays a lock icon in the middle of the screen Prompt The collision sensor G sensor supports sensitivity adjustment By default sensitivity adjustment is lt Off gt You can change the sensitivity settings as needed in the setting menu 6 Date and Time Setting In standby state press the lt Menu gt button twice to enter the system setting menu Press the lt Down gt button to move the cursor to the lt Set the date gt option Press the lt OK gt button to confirm it and enter the lt Setting gt menu Prompt Press the lt Up gt and lt Down gt buttons to select values press the lt Menu gt button to proceed to the next option and press the lt OK gt button to confirm the option and then exit Note To effectively record the date and time of obtaining the evidence of the traffic accident set a correct date and time before using the DVR 7 USB Mode Connect the data recorder to the USB interface of a PC by using a data cable Then the screen displays two modes memory and camera Press the lt Up gt or lt Down gt button to select the lt Memory gt option Press the lt OK gt button to enter the USB flash disk mode Prompt When you use a PC to copy a video recording file it is recommended that you use a card reader to copy the video recording file in the TF card to the PC 8 Playback of Recording File In power on state press the lt MIC gt button twice to enter2. the lt Menu gt button to exit the menu setting function 3 lt OK gt Button Function 1 Locking During the video recording process press the lt OK gt button to save the video recording data into a separate folder in the memory card The files in the folder will not be overwritten cyclically Note In playback mode a key shaped icon in the miniature icon list indicates that the audio recording is locked Function 2 Photograph In photograph mode press the lt Record gt button to take photos Function 3 Confirmation During the menu setting process press the lt OK gt to confirm the settings Function 4 Play In playback mode press the lt OK gt button to play video data and press the lt OK gt button again to suspend the playing of video data Function 5 Escape In playback mode press and hold the lt OK gt button for five minutes to switch the current interface to the recording interface 4 lt REC gt Button Function 1 Page up In the menu setting and playback modes you can press lt Up gt to page up Function 2 Fast Backward In playback state press the lt REC gt button to enter the fast backward mode Function 3 Video recording In standby state press the lt REC gt button to begin to record and press the lt REC gt button again to stop recording 5 lt MIC gt Button Function 1 Page down In the menu setting and playback modes you can press the lt Down gt button to page down Function 2
3. the DVR should be mounted on both sides of the rearview mirror Before pasting and mounting the DVR clear the impurities and moisture in the pasting position by using a clean and soft cloth 4 Fix the power cable properly by using the cable slot and cable clip preventing the line of sight from being affected 5 Insert the in vehicle charger into the cigar lighter of the automobile 6 Insert the charging interface of the in vehicle charger into the USB interface of the data recorder 7 Adjust the angle of the data recorder ensuring that the camera lens keeps level with the ground 8 Start up the engine and check whether the DVR is mounted properly Il Function Description 1 Automatic Recording After you start up the automobile engine the DVR is automatically started and the recording function is enabled In addition the system indicator and power indicator are turned on and the REC indicator on the screen blinks After you turn off the automobile engine the DVR saves the recorded content automatically and is powered off The recorded images are saved segment by segment in the TF card When the TF card saves recorded images at full capacity the data recorder overwrites the early recorded images Note a You can set the time period of recording in a menu The time period can be set to 1 minute 3 minutes and 5 minutes The default time period is 3 minutes 2 Manual Recording Press the lt Power gt button and then the D
4. the playback mode Press the lt Up gt or lt Down gt button to find the desired type of file and press the lt OK gt button to play back the file 9 PC Camera Connect the data recorder to the USB interface of a PC by using a data cable Then the screen displays two modes memory and camera Press the lt Up gt or lt Down gt button to select the lt Camera gt option Press the lt OK gt button to enter the PC camera mode After a driver is installed in the PC lt My Computer gt displays the camera icon Double click the camera icon to turn on the camera 10 GPS tracking Optional When the car DVR open up the screen will show NO GPS if there is no external GPS module connected to the gps port And the GPS module connect to the device it will show red GPS icon When the icon turns white it means positioning successfully From now on as long as you use the recorder function the treading track will be recorded in the video files It will also show the temporal longitude and latitude speed and driving track if you use the dedicated video player Note Please select the GPS to open from the setting of menu before you use GPS This function will be only worked with the dedicated external GPS module amp video player Technical Specifications Built in Imaging Sensor 3 Megapixel Angle of View 170 wide angle Shooting Resolution Rate FHD1920x1080 and HD1280x720 Frame Rate 30FPS H
5. D1080P and 60FPS HD720P Video Compression Format H 264 Video Output Mode NTSC PAL Screen Size 1 5 inch Storage Temperature 20 C to 70 C Operating Temperature 10 C to 60 C Operating Humidity 15 to 65 RH Capacity of Memory Card 4 GB to 32 GB Standard Voltage DC5V
6. Fast Forward In playback state press the lt MIC gt button to enter the fast forward mode Function 3 Mode switching In standby state press the lt MIC gt to enter the photographing mode and press the lt MIC gt again to enter the playback mode On the playback interface you can page up down and press the lt OK gt to select the desired file Function 2 Disable the audio recording function In recording mode press the lt MIC gt button to disable the audio recording function Then the MIC indicator is turned off Press the lt MIC gt button again to enable the audio recording function Then the MIC indicator is turned on 6 lt Reset gt Button If the DVR is crashed press the lt Reset gt button to power off the DVR Operation Guide I Installing the DVR 1 Power off the automobile engine 2 Insert the TF card into the TF slot Note a The 1080P format is adopted for the video recording function and a large amount of data is generated for the video recording function To prevent system crash you are recommended to use a well branded high speed TF card Class 6 or above with a capacity of at least 4 GB The TF card supports a maximum capacity of 32 GB b The data recorder does not support hot plugging of the TF card Be sure to remove the TF card after powering off the data recorder 3 Secure the DVR to the front windshield of the automobile Note You must mount the DVR in a safe place with ample light Preferably
7. High Definition DVR User Manual Ver 12 1 Diagram on Buttons 1 MIC interface 2 TF slot 3 Knob 4 USB interface 5 GPS interface 6 AV interface 7 MIC indicator 8 Power indicator 9 REC indicator 10 Screen 11 MIC button 12 REC button 13 lt OK gt button 14 lt Menu gt button 15 lt Power gt button 16 Pedestal 17 Reset button 18 Cable slot Description of Button Functions 1 lt Power gt Button Function 1 Power on off In power off state press the lt Power gt button to power on this DVR Then the DVR begins to work automatically In power on state press and hold the lt Power gt button for five seconds Then the DVR saves the video recording file automatically and is powered off Function 2 Backlight In power on state press the lt Power gt button to disable the backlight of the screen and press any button to resume the backlight of the screen This function only acts upon the backlight of the screen without affecting the videorecording function 2 lt Menu gt Button Function 1 Menu button In standby state press the lt Menu gt button to enter the function setting table of the main menu Press the lt REC gt or lt MIC gt button to select the desired option and press the lt OK gt button to confirm the selected option After completing the setting press
8. VR is powered on and begins to record data automatically Press and hold the lt Power gt button for 5 seconds and then the DVR saves the recording data automatically and is powered off 3 Photographing Function In standby state press the lt MIC gt button to enter the photographing mode Then the icon in the upper left of the screen is changed from a video camera to a still camera You can press the lt OK gt button to take photos To switch back to the video recording mode press the lt MIC gt button and press and hold the lt OK gt button for five minutes 4 Motion Detection Function In standby sate press the lt Menu gt button to enter the setting menu Press the lt Down gt button to move the cursor to the lt Motion Detection gt option and set its state to lt On gt Press the lt REC gt button to enter the motion detection mode If the lens senses a moving object peripherally the data recorder enters the video recording state If the lens does not sense any moving object within 60 seconds the data recorder stops video recording To exit the motion detection mode enter the menu again and set the state of the lt Motion Detection gt option to lt Off gt Prompt If you need to use the motion detection function for a long period purchase portable power supply separately 5 Collision Sensing The DVR is fitted with a built in collision sensor G sensor In case of severe vehicle collision the DVR locks the image
Download Pdf Manuals
Related Search