GOCLEVER Auto GPS/GPRS t USER MANUAL GOCLEVER BIG
Contents
1. CO GOCLEVER big i USER MANUAL GOCLEVER BIG I AUTO Auto GPS GPRS tracking device Dear Customer Congratulations you have made a great choice buying our Auto tracking device Please read carefully this user manual to obtain all profits it can give to you 1 Introduction BIG I Auto is a compact device simply sending GPS position coordinates using GSM GPRS modem BIG I Auto is dedicated device for in car machine usage Thanks to BIG I web software user can easily see actual position online Thanks to strategic partnership with Fleet Online professionals our servers will gather and store all the information sent from devices to be analyzed in future Therefore our customers can browse location history prepare reports set up alerts etc BIG I Auto was built to protect our property our cars machines You can be sure that knowledge about your car or machine location can be a factor which helps you in better managing giving you peace of mind Product features Built in high performance very sensitive GPS chipset giving accurate position even in weak reception places Built in GSM GPRS module to support GSM 900 1800Hz compatible with most of GSM operators Supports GPRS TCP connection 12V direct connection cable to car s ignition and battery car charger for temporary installation low weight 750mAh battery for unauthorized power cutoffs Hardware Specification KO aa SET protocol 5 95 non coagulation 88mm 46mm 18mm 750mAh re2. chargeable battery 3 7V LED codes information GO soc ever GPS light z Power LED GSM lights AUTO www goclever com Looking at the device flashing LEDs user can check actual device status Blue LED indicates actual status of GSM signal Constant light No SIM card or no GSM network Flash once every 8s Network available modem on standby Red LED charging instructions like Note When charging device with very low battery level red LED may not light up Constant light Charging No light Ignition off Green LED indicates GPS signal status No light No GPS signal no fixed position GPS receiver works fixed position Device connection schematics GOCLEVER Big I Auto can be connected for temporary usage with help of included car charger Simply connect Device cable with a charger plug then put a charger into 12V plug cigarette lighter in your car For permanent usage device must be connected by authorized electronic service Note GOCLEVER does not take any responsibility for damages caused by faulty device installation Cable color connection 12ACC VCC 10 30 V DC GND Note It is extremely important to connect device in proper way contact local car electrician in order to do so
Download Pdf Manuals
Related Search