Home

The Setup Wizard

1. Traceroute Bro Kernel Module Vendor VBOK Model CD ROM Informationen zu Laufwerken td0 TCMS Vendor Model PCI Gerate USS Gerste EsounD Konfiguration Boot Konfiguration Tou C L Maus Cursor verstecken Picture 38 Kommbox Tools Information about Drives 48 Rangee Thin Client TCMS Using the menu TCMS thin clients can be registered manually at the TCMS Click register and the information from Setup gt TCMS Settings will be used to register by the TCMS In the textbox Log file is a response to the registration process F rongee Picture 39 Kommbox Tools TCMS Rangee Thin Client PCI Devices Under the menu item PCT device the hardware is shown which were detected at system startup from your Linux operating system This tool is helpful to get information about troubleshooting This content can be copied in a email for the Rangee Support You do this using the following email address support rangee com Setup Verbindungen Tania Brendon F rongee aaa PCI Ger te Bi Traceroute 0000 00 00 0 Host bridge Intel Corporation 440FX a Kernel Module 82441FX PMC Natoma rev 02 Ping W Informationen zu Laufwerken 0000 00 01 0 ISA bridge Intel Corporation 8237155 PIIX3 ISA Natoma Triton II 0000 00 01 1 IDE interface Intel Corporation 82371AB EB MB PIIXS IDE rev Oi Konfiguration 0000 00 02 0 VGA compatible controller InnoTek Boot Konk
2. 07 ica 9 03 nx 1 00 1 52 xdmep 1 00 Bild 59 Desktop Spiegelung ber VNC Remote Access via SSH Rangee Linux has an SSH server which allowed every SSH client access to the device Username and password for SSH access to the Thin Client is available on request Rescue Panel During the boot process shortly after switching on the device with the ESC key can be called the rescue panel This includes the following features e Firmware Starting the OS Rangee Linux on device e Disable VESA Mode Starts Rangee Linux without VESA support Particularly important of using PC Stick in PC with Intel chipsets e Disable ACPI Turning the power management ACPI off Usefull by using the PC sticks in older computer architectures e Reset to factory defaults Reset Rangee Linux to factory settings If the password has been forgotten this action can also be use by getting the master password Contact to the Rangee support e Reset to factory Video defaults resets the graphic settings to factory e Update Firmware This menu item allows the firmware to completely reload For questions please contact the Support Rangee The actions in the rescue pane should be performed only in an emergency by an administrator The implementation of the selected action requires an administrator password This is identical to the password for administrator access to the Kommbox By default it is engels
3. Bild 26 Kommbox serielle Ports Network The following configuration menu allows you to configure Ethernet or a wireless LAN connection Also several connections can be used In addition to onboard Lan you can use forms of PCI and PCMCIA cards as well as USB devices Every located port is displayed in network devices and can be configured The host name is used by Unix Linux systems as the host name and in ICA or RDP sessions as the client name The default host name is the name mac and the corresponding MAC address of a device Rangee Linux supports W7P time server If this is configured the Rangee Thin Client get information about the date and time of the specified server If you need more fonts than are available you can enter the IP address of a font server Also in this form you can add a DNS server and an alternate DNS server Z 36 Rangee Thin Client The option udhgpc activates an alternative DHCP client you should test if there are problems receiving the DHCP information F rongee FEUER F land 192 168 1 111 tant Hostname Domainname DHCP Client udhcpc benutzen Arbeitsgruppe Zeitserver Fontserver 1 DNS Server 2 DNS Server Hosts Picture 27 Kommbox network Network Devices By clicking lan0 you can configure the ethernet network interface according to your network settings Basically you can choose between getting the IP by DHCP or manually to define a stat
4. aa aaa naaa naa KA NN KA NAN KN NN ANN NAA NAAN KA ANN AA NAA KAN KAU KNA nun nun nenen 64 New RDP Connection na anne 65 Mozilla PEO AKUNG GNG 67 VMWaTEVIEW AABANGAN 69 Desktop Mirroring via VNC 73 Remote Access via SSH aa inn 74 Rescue Panel IE kaia 74 Rangee Thin Client Introduction Congratulations on your purchase of a thin Rangee client with Rangee Linux Rangee Linux is a state of the art embedded Linux system for thin client devices that meet high demands on functionality Rangee Linux offers both comprehensive and flexible functions for networks with many different types of servers and web applications With Rangee Linux the thin client is able to set up several sessions to Windows 2003 Server Windows 2000 Server Windows NT Terminal Server Unix based server mainframe intranet and the Internet at the same time This Administrator Guide is primarily intended for thin client administrators It describes how to start the thin client and how to configure it For additional help the Rangee Support is available by phone under 49 0 241 997 28 50 or support rangee com This manual is divided into the following chapters Getting Started Setup guide Administration of the client Configuration of the global settings Set up connections Configuration of connections Extended administration Extendet configuration settings Ir 5 Rangee Thin Client Warranty The Rangee GmbH granted
5. al ThinKing Ay RANGEE GMBH Rangee Thin Client User Manual Rangee Thin Client RANGEE THIN CLIENT User Manual Rangee Thin Client User Manual Rev 6 40v2 Copyright 2011 Rangee GmbH Gut Damme Str 11 52070 Aachen E mail info rangee com Web You always find the actual version of this user manual at the download area of our homepage http www rangee com Support 5 Downloads Copyright This manual is copyrighted The unauthorized copying partial or complete reproduce translate or dissemination via electronic media is prohibited Trademark ICA is a registered trademark of Citrix Systems Inc MetaFrame is a registered trademark of Citrix Systems Inc Ericom and PowerTerm are registered trademarks of Ericom Software Ltd Microsoft Windows Windows NT and Windows 2000 are registered trademarks of Microsoft Corporation Java is a registered trademark of Sun Microsystems Inc ThinPrint is a registered trademark of ThinPrint GmbH All other product names and company names mentioned in this manual are used only for identification or explanation of products or companies and may be trademarks of their respective owners Diclaimer The information in this manual has been compiled to configure Rangee thin clients The Rangee GmbH reserves the right to modify parts of the content at any time The Rangee GmbH can not be held responsible for errors or ambiguous information in this manual Aac
6. Arbeiteverzeichnis Numlock synchronisieren Fenstergr e Picture 51 Kommbox Global RDP Settings New RDP Connection By clicking the button New Connection you Will passed to the configuration settings for a new RDP connection Under Server you can entered the IP adress or DNS name of the terminal server which you want to connect Im 65 Rangee Thin Client If you want to set the Server when the connection is started manual you have to enter a So the user can enter an individual Hostsystem which he wants to connect Optional you have the oportunity to enter hostname into the textbox User Than the username will automatically generated with the hostname of the client Alternatively you can also click on the button above for searching available RDP servers inside your network These are then displayed in the drop down menu Available RDP server For selecting a server open it and click on the desired server User name password and domain can be entered for an automatic login process Also the connection can be started automatically when a smart card is inserted RDP allows you to automatically launch an application Set in the following fields the name of the application eg exce exe together with the associated working directory eg C Program Files Office Also there the application can be set which is provided by a Windows Server 2008 as a RemoteApp Under co or you set the color depth of the current RDP con
7. TCMS Einstellungen Numlock bei Systemstart Tastatur Sprache Bildschirm Verz gerung ms Netzwerk Wiederholrate Zeichen s Verlassen Bildschirm Tastatur Linksh nder Maus Doppelklick Intervall Maus Beschleunigung 0 10 Maus Grenzwert 0 10 Smartcard Unterst tzung aktivieren 7 ng zur ck weiter w TCMS Einstellungen nicht oO bernehmen Picture 3 Setup Wizard keyboard Screen This field allows you to configure the screen settings You can specify resolution refresh rate and color depth The default setting for the graphic selection is automatic In this case all resolutions that can be displayed by the monitor and the graphic card are offered Ir 9 Rangee Thin Client Depending on the graphic card not all resolutions can be used IIn any case you should test the settings after each change If the test image could not be displayed correctly the settings have to be adjusted again If the desired resolution and refresh rate can not be shown the graphic card driver is not compatible with the existing graphic card what can be solved by forcing the option Vesa mode ai rongee Konfigurationsmethode Automatisch v Aufl sung ausw hlen 800x600 z Tastatur Sprache Farbtiefe ausw hlen Desktop Konfiguration TCMS Einstellungen Bildschirm Frequenz ausw hlen Netzwerk Verlassen VESA Modus erzwingen ATI Treiber benutzen Mehrmonitor Ausgabe Vertikale Anord
8. Thin Client at the TCMS you can configure the settings of communication in the following The DHCP option determines whether the thin client get the IP address of the management Server via DHCP or you can enter a fixed adress To setting up the address manual you can enter the IP adress or the DNS name of the TCMS in the textbox below The communication with the Rangee TCMS is default by port 5800 This port can be changed if necessary There can also be determined whether connection settings for example a RDP connection get from TCMS or ignored If you just want the settings divice settings getting by the TCMS you have to check the box gnore connection ial 39 Rangee Thin Client For more information on Rangee TCMS see the user guide of TCMS or ask the Rangee support F rongee E information E Bemnzerenstellungen per DHCP beziohen Desktop Konfiguration Remote Administration Server W Software Aktualisserung Wi Konfiguration Tastatur Sprache Gruppe Pon Datum und Uhrzes Ej Bildschirm Verbindungen nicht ubernehmen W Bildschirmschoner Laufwerke Senele Ports i Netzwerk ICMS Einstellungen Drucker Picture 30 Kommbox TCMS Settings 40 Rangee Thin Client Printers With the menu item printer Rangee Linux offers the option to set up several different printers on the Thin Client Basically printers can be connected to the local interfaces USB serial or parallel and be ac
9. a two year warranty on all products In percentage depending on the net purchase price an extended warranty of up to five years is possible third year extended warranty 15 surcharge fourth year extended warranty 20 Yo surcharge fifth year extended warranty 25 Yo surcharge You also have claim on support and all firmware updates for the duration of your warranty period After the warranty period an extension of the support is possible which also includes further claim on firmware updates After consulting the Rangee GmbH you may either download it directly from our FTP site or we will send you a support CD In case of warranty please contact the Rangee support or follow the instructions at http www rangee de site de service_1 33 html Training As part of the Rangee partner program the Rangee GmbH offers specific qualified user trainings to teach the safe handling with the Rangee products Participants will learn within the training the administration and configuration of the Rangee thin clients and of the Rangee TCMS Thin Client Management Server This training is intended for our customers as well as for our partners The training takes place in Aachen in the training rooms of the Rangee GmbH and take an entire day We also would be pleased to realize the training at your company Further information about user training is available on request by e mail or contact us We are available under Tel 49 0 241 997 2
10. administrators locally on the device and specify the appropriate access rights Please note that at assignment or changes of the password the password have to contain at least three characters Passwords with less than three characters are not accepted by the system The Guest account is a predefined user account with limited rights Rangee Thin Client rm F rongee guest administrator ink W5 5 O R as Kk Ts Ds E 6 Wla Se Ne TC On Picture 11 Kommbox user settings Desktop configuration In the desktop configuration the graphical user interface of each device is specified First the menu language for the desktop layout is selected The Rangee Linux currently offers two different languages e German e English The option show program icons on the desktop allows you to create a Windows like desktop environment Here three icons will be set up on the desktop by default Shutdown switch off the device N sa Reboot restart the thin client C Kommbox opens the conneciton and configuraion settings m 18 Rangee Thin Client Under connections settings you also have the option to create an desktop icon for each connection At Wallpaper you have the possibility to upload your own desktop background or to change the color of the desktop To view any background image you have to obtain the image from a network drive or a local drive You Il find further information about how to
11. date and time you can specify whether the date and time will also be shown in the taskbar Show Kommbox is the option to choose how you want the Kommbox to be shown Depending on you settings the Kommbox and the Kommbox icon can be shown on your desktop Another option is that only the Kommbox or only the Kommbox icon can be shown on your desktop The last option is that neither the icon nor the Kommbox appears Of course you still have access to the setup and configuration settings by using network access to the device or open the Kommbox with the keyboard shortcut Shift Strg Alt K Fore more information about remote administration see page 20 72 continued following Alternatively there is also the option to show another homepage in the Kommbox than the local hombepage For this you only have to add an alternative homepage in the field below Please note that you have to confirm your changes to the desktop configuration with apply and that some system changes only take effect after a reboot The option show stop buttons at the Kommbox allows to display connection start buttons as well as buttons to exit dedicated individual connections After the activation you Il find this within the connection overview To do this you have change into connections Rangee Thin Client A rongee Kommbox Kommbox beim Start ffnen Sprache w hlen Lokale Startseite Alternative Startseite Zeige Stopp Buttons in der Kommbox Programmleiste
12. enter the appropriate key or password in the box below So the secure access to the wireless network is guaranteed After configuring the network devices the network settings in the main menu have to be confirmed to be accepted and activated E rFoONgeE ri O Netzwerkger t wlan0 Desktop Konfiguration DHCP r TCMS Einstellungen Tastatur Sprache IP Adresse Bildschirm Subnetzmaske Netzwerk Verlassen MAC Adresse 00 0E 2E 57 C9 D5 Verfuegbare ESSIDs ESSID Kanal Signal Qualitaet Schluesselart pr zur ck weiter Schl ssel Passphrase Picture 7 Setup Wizard network interface setting wlan0 Finish the Setup Wizards With this dialog the configuration wizard will be finished After the restart the thin client is available on your network Rangee Thin Client E COngee a Wie soll der Setup Wizard verlassen Client neustarten werden Desktop Konfiguration TCMS Einstellungen Tastatur Sprache Bildschirm Netzwerk Verlassen Picture 8 Configuration Wizard Finish Hotkeys Rangee Linux offers several useful hotkeys as described below to provide users with easier access to important information and settings Ctrl Alt or gt Move to the next previous link Ctrl Alt End Minimizes all windows and show the Kommbox Ctri Alt N Maximizes all active sessions Ctri Alt Vv Minimizes all active sessio
13. link drives on page 32 Then you have to load the new background on change background The previously connected network drive now appears under release for background graphic In the field below you only hav to enter the filename of the background image Please note that the graphics have to be JPG o GIF files Other graphic formats are not supported by the system When you have taken over your settings select the loaded graphic from the drop down menu under wallpaper The desired background image will be shown rm A rongee AA Dateiname der Hintergrundgrafik Ki wt Di ib 3 w W li us un im Tc w Picture 13 Kommbox change background Under display background graphic you can specify how your background image should be pictured You can choose between normal display full screen and tiled display Ir 19 Rangee Thin Client When setting up the desktop layout there can additionally be vizualiized a pogram taskbar This taskbar is useful when multiple connections are used simultaneously and displays this in the form of singel buttons From the start menu you can go to the preconfigured applications as well as to the standard functions like shutdown reboot and Kommbox Furthermore the taskbar can be shown permanently or be hidden automatically by using this option Rangee Linux also offers the option of positioning the taskbar If desired the taskbar can be positioned at the top or bottom of the desktop With show
14. port instead of the standard port 5900 With the behavior of external connection via VNC you define how the local user should be informed about the desktop reflection For more information on remote access via SSH see page 72 et seq A rongee maa Remote Zugriff uber Webbrowser 7 Abweichender Web Port https Remote Zugritf ber VNC VNC Restart Icon anzeigen Abweichender VNC Por Standard 5900 VNC Kennwort A Verhalten bei externem Verbindungsaufbau uber VNC SSH ACHTUNG Nur zur Fehlersuche TCMS Einstellungen nicht bernehmen Picture 15 Kommbox remote administration Software Update Rangee the firmware can be upgraded via the menu item software update There you can install new firmware versions and change or update software modules Within the warranty the software support is for free After the warranty the service can be extended with costs Subscription Configuration of the update server As the update server you need a web server or an FTP server On this server you create a directory Rangee In this directory you set up the subdirectories firmware and software Z 22 Rangee Thin Client The update of a module and a firmware has two components 1 An XML file which describes the module an 2 One or more IMG files containing the actual softwaremodule eg ICA client The necessary updates are available for download on the Rangee website Please send us an short e mail to reques
15. the automatic assignment via DHCP and use static IP address to select previous page Additionally the ESSID name of the wireless network must be selected With WEP WPA and WPA2 Rangee Linux offers three encryption methods for wireless networks These regulate the connection to their network and ensure the integrity of data Among key typ select your encryption method and enter the type appropriate key or the password in the box below So the secure access to the wireless network is guaranteed The WEP or WPA key must be entered in form of hexadecimal or ASCII ial 38 Rangee Thin Client After configuring the settings of the network devices youe have to confirm the network main menu Otherwise the current changes will not work A rongee DHCP E Information IP Adresse Benutzereinstellungen ka Desktop Konfiguration Subnetzmaske Bi Remote Administration E Software Aktualisierung MAC Adresse 00 0E 2E 57 C9 D5 E Konfiguration Verfuegbare ESSIDs SMC Bj Tastatur Sprache E Datum und Uhrzeit ESSID SMC Bildschirm Kanal Laufwerke Signal Qualitaet 24 100 Serielle Ports Bildschirmschoner Netzwerk Schluesselart Kein Schl ssel TCMS Einstellungen Piika Schl ssel Passphrase Drucker Bild 29 Kommbox Netzwerk Interface Configuration wlan0 TCMS Settings With the Rangee Thin Client Management Server TCMS it is possible to manage several Thin Clients To register the
16. to be able to make a connection betweent the client and the connection server ial 69 Rangee Thin Client If there are multiple virtual desktops for a user enter the Desktop Name which should be opened automatically With the selection of RDP PCoIP you set which protocol will be used in the transfer between connection server and virtual desktop If RDP is selected the RDP module has to be installed locally on the thin client The use of PcoIP has to be configured server side Resolution specifies the display if the Window The drop down box allows the selection of Fullscreen and Fixed size If the VMwareview session should be spanning two displays select the Fullscreen option Two options are present for mapping connected drives With Map all disks on a single letter all detected drives will be displayed as folders in one single drive letter The dropdown menu allows you to chose the letter to assign Alternatively by using Map each disk on a different etter all drives can be mapped to indivual letters Detected drives will be listed and each has his own dropdown menu for chosing a drive letter to assign Activating the checkbox for Enable printers mapping makes installed printers on this TC available for use in the virtual desktop session The Default printer will be displayed Connection ending option lets you select how the client behaves when the connection ends These options can be set in the configuration or selected by
17. 8 255 250 zur ck weiter y Hosts Netzwerk Picture 5 Setup Wizard network Network devices Clicking lan0 you can configure the Ethernet network interface card according to their network settings Basically you can choose between the automatic allocation of the connection information via DHCP or manually via a static IP address To use a DHCP server you only have to activate the DHCP option Otherwise enter the IP address of the device and the subnet mask in the fields below Confirm also your input with App y rongee Se naa aaa A Netzwerkgerat Desktop Konfiguration DHCP TCMS Einstellungen Tastatur Sprache IP Adresse 192 168 255 144 Bildschirm Subnetzmaske 255 255 255 0 Netzwerk Verlassen Standardgateway 192 168 255 5 MAC Adresse 00 1B B9 C3 3B 76 MTU 1500 Link Typ ausw hlen auto zur ck weiter w Picture 6 Setup Wizard network interface settings lan0 Z 11 Rangee Thin Client Connected wireless LAN adapter can be configured by clicking on wlan0 Again you can choose between automatic assignment via DHCP and the use of static IP address information see lan0 Additionally the ESSID name of the wireless network can be specified With WEP WPA and WPA Rangee Linux offers three encryption methods for wireless networks This offers security for transmission of sensitive data and regulate the access to your network At key type select your encryption method and
18. 8 50 e Mail training rangee com Rangee Thin Client Getting started With the simple setup routine the Rangee Thin Client is installed within minutes Introduction There are two ways to start up the thin client Manual configuration single devices using the Setup Wizard Automatic configuration via DHCP FTP and HTTP server in combination with the Rangee Thin Client Management Server TCMS Manual configuration When first starting the thin client theRangee the Setup Wizard appears automatically The network address for the first detected network connection typically Ethernet for the manual configuration is automatically set to 169 254 0 1 After power up you can configure the thin client settings over the network by using the setup wizard The setup wizard request the basic settings of the terminal step by step and prepare the operation of the workstation Select the desired settings and then confirm it with Apply With the Next button you go to the following dialogues With the Back button you can call previous dialogs and edit it Ir 7 Rangee Thin Client Automatic configuration If the Setup Wizard is not edit for more than 30 seconds an automatic restart is performed The device starts with default settings After the restart the network settings will be changed into DHCP The device can be configured manually This can be done locally and remotely via web browser if the address that is assigned by the D
19. HCP server or the host name is known Alternatively the configuration of the thin client can fully be automated on restart This requires a DHCP server and a thin client management server The Setup Wizard LanguageRangee Linux currently offers two different languages for the desktop layout e German e English E rongee Desktop Konfiguration TOMS Einstellungen Tastatur Sprache Sekunde tellungen Bildschirm bernehmen Verlassen Picture 1 The Setup Wizard TCMS settings Via a Thin Client Management Server TCMS several thin clients can centrally be managed The DHCP option determines whether the thin client gets the address from the management server over DHCP or if it is fix This can be entered in the corresponding text box The communication with the Rangee TCMS takes place by default via port 5800 After a successful registration at the TCMS you can see the groups here the client belongs to Ir 8 Rangee Thin Client E FONgEE we aan per DHCP beziehen Desktop Konfiguration Server TCMS Einstellungen Tastatur Sprache Port Bildschirm Gruppe Netzwerk Verlassen Verbindungen nicht bernehmen O q zur ck weiter v Picture 2 TCMS settings Keyboard Here you can set the keyboard language You ll find a complete list of supported keyboard languages at page 26 ai rongee al Layout w hlen Sema Tote Tasten deaktivieren Desktop Konfiguration
20. Lautwerksname Protokoll Abweichender Port Server Verzeichnis Freigabename Benutzer Kennwort Arbeitsgruppe nur f r SMB Picture 23 Kommbox configure network drive Again a different port can be entered Following only the server on which the release was established the directory path and name of the share are given An authentication with username and password allows a secure access to the network share Im 32 Rangee Thin Client Local drives will only appear in the configuration when the drive is connected to the device USB memory sticks USB floppy and CD ROM drives and USB hard drives will be supported Rangee can not guarantee that all USB extensions work without restriction When selecting compatible modules the Rangee support will be pleased to assist you The detected drives will be shown in the drop down menu accordingly to their names as usual under Linux Usually the first connected USB stick is integrated with the name SDB Is there already a partition on it it will be displayed with SDB1 Select the drives that you want to connecnt to the ThinClient By using a card reader you have to select the partition The names without numbers SDA SDB SDC at the end are placeholder for other connections It is important that you always have the partition for example SDB1 selected otherwise the integration will not work After clicking confirm the created drives are displayed With edit you can c
21. Nutze Samba Logindaten Benutzer Kennwort Dom ne Startverz gerung XenDesktop Anwendung fur automatischen Start wird gestartet sobald PNAgem verbunden ist Verbindungsende beim beenden einer automatisch gestarteten Anwendung oder Keine Aton einer XenDesktop Verbindung Picture 49 Kommbox PN Agent XenDesktop configuration RDP RDP stands for Remote Desktop Protoco and is a standard protocoll from Microsoft Rangee Linux uses open source RDP development and if required a paid development of the company ThinSoft Inc The RDP protocol allows connections to Windows NT 4 TSE Windows 2000 Terminal Server Windows XP and Windows 2003 and 2008 Terminal Server By clicking on RDP in the left menu bar you open the menu for RDP configuration Within these menu can choose between different options G oba Settings and New Connection The pre configured RDP connections are listed below These can be edited or deleted using the corresponding buttons Rangee Thin Client F rongee WTS RDP Bild 50 Kommbox RDP Configuration Globale RDP Settings Using the Remote Desktop Protocol RDP a session on a Windows Terminal Server will be started The RDP global settings contain the global default settings for all RDP connections With the point enable mapping of serial port the local serial interfaces will mapped on a terminal session The option USB redirection allows to pass the local USB ports in the RDP sessio
22. Programmieiste sichtbar Positionierung Kontextmen anzeigen Immer im Vordergrund Automatisch ausblenden Uhrzeit und Datum einblenden 7 Picture 14 Kommbox desktop configuration Remote administration Because of the integrated http web server the administrator can connect to the Rangee thin client from every web browser on the network So the setting options remote are the same as local via Kommbox The remote access via web browser is activated by default and occurs via the HTTPS protocol which builds up a secure http connection to the Rangee thin client Standard port for HTTPS connections is the port 443 At deviate web port https you have the option to add another released port To access a Rangee thin client simply type https lt IP Adresse gt in the address bar of the web browser Another option the Rangee Linux offers for the remote administration is by remote access via VNC The abbrevation VNC stands for Virtual Network Control and offers the administrator the ability by using a previously established VNC password to reflect the screen on a remote computer for example on Windows by using a VNC viewer By displaying the VNC restart icon the user ensures with a double click on this icon that the reflection is ended ial 21 Rangee Thin Client Please always use the latest VNC viewer for the desktop reflection which you can download at http www realvnc com Even here you have the option to enter a different VNC
23. ant printing from local applications like Web browser and terminal emulation Under http www linuxprinting org many print drivers for linux are available for download Here you select the printer click in the following window on download PPD file and save this file on a network drive Bind this network drive to the thin client and you can select the file at the drop down menu at the printers configuartion at driver Rangee Linux offers the support of ThinPrint For more information on configuring ThinPrint see http www thinprint de Enabling printing via TCP ports and define the port for example port 9100 your Rangee Linux system work as a print server This feature makes the CUPS service available and allows others on the network to use the locally attached printer on Rangee Thin Client as a network printer If you have multiple printers locally on the thin client each printer can be assigned a separate TCP port eg A printer uses port 9100 B printer port 9101 C printer uses port 9102 etc Optionally it is possible to use this printer as the default printer Im 42 Rangee Thin Client F rongee Druckerbeschreibung Server Druckername Server Druckertreiber Anschlussart Treiber Aktueller Treiber Thinprint aktivieren Thinprim Name Thinprint Klasse Thinprint Lebensdauer Direktdruck TCP Drucken TCP Druck Port Picture 33 Kommbox Configuring a lokal printer Mapping a netw
24. ault Connection ending option lets you chose how the client will behave when the connection is closed Rangee Thin Client F rongee Verbindungsname Bildschirmgr e Prozentuale Gro e 10 100 nahtloses Fenster Feste Bildschirmgr e Dualhead Optionen Mit ICA Server verbinden Im Netzwerk gefundene ICA Keine Server cetanden Server Mit ICA Anwendung verbinden Im Netzwerk gelundene IKA Applikationen Server Post Anwendung Picture 48 Kommbox ICA configuration New PN Agent XenDesktop connection PN Agent is the abbreviation for Program Neighborhood Agent This application developed by Citrix Systems Inc allows the connection to a server with installed Nfuse or Webinterface to open applications that have been enabled for usage Citrix XenDesktop is a solution for the deployment of virtual desktops A connection to XenDesktop can be configured in the following configuration dialog Username password and domain can be entered beforehand for automated connection and login procedures A manual login will be opened otherwise If multiple applications were enabled for use via the web interface it is possible to chose one Application for automatic start The Connection ending option ets you chose between different actions These actions can be specified in the configuration or be selected by the user Im 62 Rangee Thin Client F rongee Verbindungsname Server Pon
25. can be connected via this protocol e HP JetDirect socket Is a network printer via print server which is HP JetDirect compatible accessible this type of connection is recommended Under Server enter where the printer is installed and fill the following textbox with the exact name of the server printer driver that the installed printer is used Then you still carry the name of the print queue The following option offers the possibility to use this printer as the default printer Save your current settings by clicking confirm Use the printer in RDP or ICA connections If more than one printer is set up one device must be set as the default printer If the mapping of printers is allowed in ICA or RDP sessions the local printer of the Client will automatically become the default printer in the terminal server session The communication takes place via the respective protocol Use the Rangee Thin Client as a print server Printers that are set up on a Rangee Thin Client can be used with other workstations as LPR or IPP printer Optional you can use ThinPrint Rangee Thin Client F rongee information Benutzereinstetlungen Druckerbeschreibung Desktop Konfiguration k Server Druckername Remote Administration Softwars Aktualisserunc p 4 h re NG Server Druckertreiber Konfiguration Tastatur Sprache Anschlussart CUPS Drucker PP Datum und Uhrzet Server Bildschirm Aldschirmschoner Bildschirms Name der Druckerwartesch
26. cessed via network protocols network printers Satua Verbindungen Tools Beenden F rongee Hosts die auf die Drucker zugreifen duerlen Bild 31 Kommbox Drucker Mapping a local printer Clicking New Local printer the menu to configure a new printer is displayed In the Printer description field your printer can assign a unique name for identification Under server printer name the name of the print queue will be entered Here the name of the print driver must entered as it is called at the Server This is important for ICA and RDP connections so automatically when the printer is connected it will get the correct driver With the connection type you can determine which interface is connected to the printer on the device Rangee Linux supports local printers with parallel port and USB port ial 41 Rangee Thin Client von Office auf http 192 168 255 45 631 vo Kd KI Erweitert Sicherheit Eigenschaften von Office auf Allgemein Freigabe Anschl sse o Sa Pie auf http 192 168 255 45 631 von SKYPE in Sitzung Modell Brother HL 2060 p Funktionen Farbe Nein Verf gbares Papier Beidseitiger Druck Ja Ad Hefter Nein Geschwindigkeit 20 ppm Max Aufl sung 600 dpi z Druckeinstellungen Testseite drucken Abbrechen Obemehm Picture 32 Server print driver It is also possible to install driver for the local printer This is important if you w
27. ction first define a Connection name As Homepage you enter the site that should be openend on start of the connection Standard port for connections is Port 80 A different port can be entered At Multihead Options you can define which monitor should display the Firefox session Should it be displayed on all connected display deviced please use the 3 option To start Firefox automatically activate the option automatic start Different actions can be defined or selected by the user when the connection ends Select the approriate option Rangee Thin Client F rongee AA Verbindungsname Startseite Pom Multihead Optionen Automatischer Start Verbindungsende Picture 54 Kommbox new Firefox connection VMwareview VMware view is a desktop virtualization solution The use of this softwaremodule requires that a VMware virtualized desktop environment is present Connections to virtual desktops can be made via the softwaremodule VMwareview Create a New connection and enter a Connection Name Virtual desktops support tunneled and not tunneled communikcation The option Create Tunnel creates a direct data transfer to the View connection server If no tunnel is created the data transfer will be between the host system of the desktop and the client If a tunnel should be created enter the 7unnel connection ID The View connection server will provide these Enter the DNS Name of theView Connection Server
28. ctory e g C Programme Office 60 Rangee Thin Client User Password and Domain can be entered beforehand for automatic log in procedures The connection can be opened automatically as well when a smart card is inserted Encryption makes the data transfer of your ICA session more secure Base encryption is activated per default When activating encryption it should be checked that the server is also configured to use encryption Remote computer sound selects if sound output should be brought to the client or be left at the remote computer Colors lets you select the colors of each ICA session 256 colors is selected as default Activate Mouse click feedback to enable the thin client to give feedback even before the server has answered Default is automatic With ocal text echo the thin client will update keyboard inputs wbfore the server has send the screenupdate completely With the option Use recent global settings is it possible to use the global settings in every ICA session If this option is deactivated all global settings will be linked to the connection that have been configured by the time the connection is created Later changes to the global settings wil have no effect whatsoever on this connection In this case different ICA connections can use different global settings The option Automatic start allows to use the pre configured connection autmatically when the client boots up This option is turned off by def
29. d to specify a storage location for the configuration that have to be exported before it is downloaded With the button import configuration a saved configuration will be imported The current configuration settings will be overwritten The device will reboot automatically F rongee Konfiguration laden Konfiguration speichern Picture 18 Kommbox configuration Ir 26 Rangee Thin Client Keyboard In this menu item wht language layout for the input device keyboard is set By using the drop down menu select layout you can choose between the different keyboard layouts that are available Important Configure the keyboard layout before connections are established Changes to the keyboard layout will not be accepted for existing connections The following keyboard layouts are available among others German German Trimodal German CH English UK English US Spanish French French CH Netherlands Netherlands international Polish Belgian Belgian NL Danish Dvorak US International Italian Hebrew Norewgian Swedish FI Swedish SE Turkish F Turkish Q The option numlock on startup is enabled by default After turning on the device the numpad on the keyboard can automatically be used without activate it manually The repetition rate sets the repetition rate in characters per second The setting values are between 100 and 5000 The delay sets the delay time between press
30. e following users can not make or change administrative settings With the quit button it is also possible to turn off the device or to restart it This might be necessary if system changes were made that take effect only by restarting Information The general information offer an overview of the most important configuration settings at the thin client Here you will be shown which user with what status is currently logged on the device Currently the Rangee Linux provides the user administrator who has all rights and the user guest which has restricted rights You also get information about the IP address and MAC address of the device as well as the installed software modules and their versions You will also find detailed information about the processor memory size and the size of the flash memory After a successful login to the Kommbox this menu option will open Ir 16 Rangee Thin Client F rongee Angemeldeter Benutzer admunistrator Sie haben den Status adm n strator IP Adresse n 192 168 1 111 080027 FE BE 02 MAC Adressein 08 00 27 917081 firefox 3 6 10 ica 110 rdesktop 1 6 vnwarevew 4 0 1 Installierte Software Zuletzt konfiguriert cong 120725 01102010 CPU 2395 MHz RAM eventuell abz glich Shared x91 som Memory der Grafikkarte Flash Gro e Belegt Frei 501 7M 200 4M 275 80 Picture 10 Kommbox general information User settings With this form the administrator can set up additional
31. es of the new ICA connection Enter a distinct and unique name in the Connection Name field for your new ICA connection Screen size lets you select how the session is displayed The drop down box lets you chose between Fu Screen Super Full Screen a fixed size or a percentage of the screen In case of fixed size the following sizes are selectable e 640 x 480 pixel e 800 x 600 pixel and e 1024 x 768 pixel By using multi monitor mode via usage of a dualhead or quadhead graphics card it s necessary to select the appropriate dua head or Quadhead optionens Here you can select on which of the connected screens the ICA session should be displayed It is also possible to spread one session over up to four screens If you want to spread one session over two screens you should select the option a Next you define if you want to connect to the ICA server or if you want to open an ICA application Depending on the selection detected ICA server or ICA applications will be displayed in the corresponding window which can be selectet via drop down menu For this to work the serverprotocol and the server farm has to be specified in the global setting By using Server you can input a specific ICA server that you want to connect to Port allows you to specifiy a non stadart port to connect The ICA client can open a single application automatically Therefor you can enter in the following fields application name g excel exe and the working dire
32. guraton Systemberatung GmbH VirtualBox Graphics Adapter Picture 40 Kommbox Tools PCI Devices Rangee Thin Client USB Devices The tool USB devices show the USB hardware has been detected at boot from your Linux operating system and which are not This tool gives fast insightful information for troubleshooting attached USB periphery Setup Ver ingungen Tania Bronson F rongee pr cere USB Gerate Bus 001 Device 001 ID 1d6B 0002 Linux Foundation 2 0 root hub Bus 002 Device 001 ID 1d6b 0001 Linux Foundation 1 1 root hub Picture 41 Kommbox Tools USB Devices EsounD Configuration The Enlightened Sound Daemon is a sound server which makes it possible that multiple applications can output audio signal This mixes the audio streams and play them on a recognized device By default this server is running on port 16001 but can be modified by changing the port Rangee Thin Client Boot Configuration To optimize the boot process at different computer architectures by using the Rangee PC stick it is necessary to individualize the boot configuration In older PC systems it is sometimes necessary to disable ACPI Advanced Configuration and Power Interface because this standard is not yet supported by hardware Some computer architectures with Intel chipsets need the video modes nte to display the boot menu Alternatively set the video mode to text boot So the Thin Client sh
33. hanged the settings of the displayed drive if required By clicking de ete an existing drive will be deleted After clicking start it is possible to share the drive If the share exists the access to the drive can be stopped by the button de efe Would you like to use this drive under RDP to a Windows 2003 or 2008 Terminal Server session configure the settings of the ICA or RDP connection Does not work with Windows 2000 or NT servers For information on setting up the terminal server connecntion see P 58 Satun Verbindungen Tools Beenden F rongee Laufwerksname Treiber Lokales Ger t Schreibbar Samba freigabe Bild 24 Kommbox Lokales Laufwerk konfigurieren Z 33 Rangee Thin Client To simplify this configuration Rangee Linux offers an auto mount function In the global drive settings there is the possibilty to check automount local drives Once this option is enabled local drives are no longer displayed in the drive list Connected local drives are detected automatically and will be directly mapped as a drive into the terminal server sessions under RDP and or ICA Please chech the global settings for RDP and ICA connections In addition u can also activate the option camera support so that a connected digital camera via USB can be used An advanced device management makes it possible to define write access for local connected drives So the user only have the opportunity to read and can not wri
34. hen Germany January 2011 Ir 2 Rangee Thin Client Contents Warranty ANAN AA AA AA AA 6 TRAINING PAA APP 6 IN TOdUCNO0 NAGA 7 The Setup Wizard GAAN 8 Finish The Setup Wizards u ANAKAN 12 INTO r MaNON AABANGAN 16 Desktop configuration imam NAG 18 Remote administration uusa00na00naunnuunnnunnnunnnnnnnnnannn nun ANAKAN ANAN 21 Software Update aNG GAGANA 22 Configuration aa aaaea aaa E aKa aai 26 Keyboard PAPA AA 27 SCPE GANG AGA 29 ScreensaVer EAGER 31 DIVO SNANG AGANE 32 Network DeviCeSi a 0000 sinaia naaar aa iaaiiai aa kaiii 35 NG W0 Naa aNG 36 al AA AA 41 TOONS sA ANA AA 46 Ping and Tracerou ke ll nn 46 Information about Drives uuun2una00na00nnunnnunnnun AN NAAN NAAN KAKANAN AN KANAN NAA AA 48 TOMS T E 49 PCI Devices E E a 50 UN 51 7177 07 1 SPBREREPERFPEREREREREERREEFEEFEEEREEBEREEFEEFEEREREBERREEREEREFEREEEREREEREEEEEPEEREEREREERREER 51 ESOuUnD CONnHquUratlon iin nun ana a mau ne 51 BOOt CORTIG UAC ON en a Eee ern nnane 52 Touchscreen Calibration uuuuna000000000na00nnuunnnunnnnnnnn nun nun nun nun nen ann nennen 53 Hide Mouse Cursor ana 54 OVEN Wa a an aa ee ANA 56 Available ConnectionS sssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnna 56 Ir 3 Rangee Thin Client DC AA AA AAAH AAP 58 Global ICA SEN paa 58 New ICA COnne Chios aaa GANANG 60 New PN Agent XenDesktop connection 01422 nn 62 ROP nee 63 Globale RDP Settings 23
35. ic IP address To use a DHCP server just activate the DHCP option Otherwise enter the IP address for the client and the subnetmask in the fields below For data communication with an external network the default gateway must be specified If needed you can assigne every network interface an own default gateway Under MTU Maximum Transmission Unit you can also set your maximum packet size that can be transmitted over the network manually The default value is 1500 octets If the communication between the Ethernet interface on the device and the remote cause ial 37 Rangee Thin Client problems the network speed can be set manualley under the point choose media type By default the network speed is automatically determined Confirm also here their current changes ED rongee dnterface Finstelungem E Information Benutzereinstellungen Netzwerkger t Desktop Konfiguration Bl Remote Administration DHER a E Software Aktualisierung IP Adresse haz es 255144 Konfiguration Tastatur Sprache Subnetzmaske 255 255 255 0 Datum und Uhrzeit BH Bildschirm Standardgateway 192 168 255 5 Bildschirmschoner MAC Adresse 00 1B B9 C3 3B 76 E Laufwerke Serielle Ports MTU 1500 E Netzwerk E TCMS Einstellungen Drucker Link Typ auswahlen auto Picture 28 Kommbox Network Interface Configuration lan0 Connected Wireless LAN Adapter can be configured by clicking on wlan Again you can choose between
36. ing a key and character repeat The setting values are between 250 and 5000 Using touch screens it may be helpful to use the on screen keyboard Therefor you have to activate this option With the option eft handed mouse you can adjust the mouse functions for left handers Rangee Linux offers the administrator to set the double blick speed manually with the double click interval The default value of 250 ms is already entered Increase the value then the double click may be slower Decrease the default value then the double click have to be faster The setting values are between 1 and 2000 The cursor speed can be adjusted using the parameter mouse acceleration and mouse limit Uni 27 Rangee Thin Client You can enable the secure authentication via smart card with enable smart card support Different authentication methods using RDP e g DATEV and ICA are possible Both with internal as well as externally connected smart card reader certified DATEV SC Reader and mIDentity sticks This option is also used for using online banking at the thin client via ctapi under RDP or ICA For more detailed information what procedures are currently supported please contact the Rangee support support rangee com A rongee can Layout w hlen Tote Tasten deaktivieren Numlock bei Systemstart Verz gerung ms Wiederhotrate Zeichen s Bildschirm Tastatur Linksh nder Maus Doppelklick Intervall Maus Beschleunigung 0 10 Maus Gren
37. ion with the respective screen will be determined automatically Then you only have to select the desired resolution and color depth It is necessary to restart the device after applying to keep your settings and changes take effect But before you have to test your settings With the manual configuration all configuration options can be set manually Regardless of whether the image can be shown in the desired resolution frequency and depth of color or not If the required adjustment can not be displayed you will be informed by an error message Via the menu item open X 7CP port you can open port 6000 so that X based programs can be started remote on the thin client Ir 29 Rangee Thin Client If you need widescreen resolutions you only can set it by user defined or manual configuration At the user defined configuration you can enter the resolution manually Force VESA mode is disabled by default This can patch eventual graphic problems at old hardware platforms especially then using the Rangee Linux PC stick Before you accept your settings and reboot the device please test them first Rangee thin clients support the multi monitor mode if the thin client model has two monitor interfaces eg TK3752 LT320 LT520 or A3300S Choose in ports if the thin client is using VGA 8 DVI or DVI and DVI2 for the multi monitor mode Moreover Rangee Linux also support from version 6 10 the quad monitor use by using the Matrox Epica TC4 Four mon
38. itors side by side or arranged in a square can be used under ICA and RDP When using a touch screen it is necessary to select the used touch type Rangee Linux supports three types EloTouch A Mount Penmount EGalax and Zytronic For more information on setting up your touchscreen see page 53 F rongee Konfigurationsmethode Aufl sung ausw hlen Farbtiefe ausw hlen Frequenz erzwingen DDC deaktivieren Frequenz ausw hlen VESA Modus erzwingen ATI Treiber benutzen Mehrmonitor Ausgabe Anschlusse Vertikale Anordnung Quadhead Modus Touchscreen Typ w hlen X TCP Port ffnen Picture 21 Kommbox screen Z 30 Rangee Thin Client Screensaver With the screen saver settings the settings for the screen saver can be configured This will set the number of minutes the screen saver will be activated If there is no value or the value 0 entered in the approprate field no screen saver is activated If the entered value is higher than O this value is equivalent to the number of minutes after which the screen saver is activated automatically By default no value is entered Moreover you can define after how many minutes of inactivity the thin client will automatically shut down The mode indicates which screen saver you are using The Rangee logo or a free selectable image can be displayed which have to be submitted in xpm format Alternatively there is the possibility to display a black
39. lange Laufwerke wale Ports Treiber Netzwerk en Aktueller Treiber TCMS Einstellungen Drucker Thinprint aktivieren Thinprint Name Thinprim Klasse Thinprint Lebensdauer Direktdruck Picture 34 Kommbox Configuring a network printer 45 Rangee Thin Client Tools With the tools Rangee Linux offers a number of useful diagnostic tools which make the administration and support significantly easy Ping and Traceroute Under Ping it is possibly to sent a ICMP packet to an host This makes it possible to check tht Connection between Client and Server F rongee saa Picture 35 Kommbox Tools Ping Rangee Thin Client With traceroute the path to the destination host will determined and displayed intermediate routers hops Kernel Module The kernel modules gives information about which drivers support the specific hardware The kernel modules can be extended by a software update or delete Attention Please contact the Rangee Support Team befor you make changes Setup Verbindungen Tania Beenden F rongee ala are Keres Module floppy generic3ps 2 option parport pc pospkr Kernel Module Picture 37 Kommbox Tools Kernel Module Rangee Thin Client Information about Drives Here are displayed local connected USB drives Each drive can be entered by the mode name or the vendor ID in a black or white list F rongee PASA Ping m 3 Laufwerke
40. letter all drives can be mapped to indivual letters Detected drives will be listed and each has his own dropdown menu for chosing a drive letter to assign Activating the checkbox for Enable printers mapping makes installed printers on this TC available for use in the terminal session The Default printer will be displayed The access to information regarding accessible sessions on Citrix Server and enabled applications works with the Standard Networkprotocol TCP IP TCP IP via http or SSL TLS HTTPS In case a server farm is in use at least one server from the Citrix server farm should be entered in Primary server group Alternatively this entry can be made by using DHCP see above If backup farms are available can those adresses be entered in the fields Server group backup 1 and Server group backup 2 Multiple servers can be entered by separating the entries with a space Z 59 Rangee Thin Client If the ICA Client sould ignore specific error messages they can be defined at Ignore error number All other options are ICA psecific For further questions please contact the Rangee Support Save your settings with Confirm Should you change the global settings later you have to reactivate the old ICA connections again to do this open the settings for the corresponding connection and click Confirm once more New ICA Connection New ICA connection opens the configuration menu for a new connection Here you can set the properti
41. mation about the status of the update process Rangee Thin Client A rongee information Benuizerenstellungen Desktop Konfiguration Remote Administration Softwars Aktualgserung Korfguration Tastatur Sprache Datum und Uhrzes Bildschirm Bildschirmschoner Laufwerke Sanella Ports letzwerk TCMS Einstellungen Drucker Aktueller Server 192 168 1 100 firmware 2 6 4 rangee 6 40 build 127 keine Anderung T firefox firefox 3 6 10 6 40 build 004 keine nderung ica ica 11 100 6 40 build 023 keine Anderung rdesktop rdesktop 1 6 6 40 build 008 keine Anderung vmwareview vmwareview 4 0 1 6 40 build 006 keine Anderung e Picture 17 Kommbox software update 25 Rangee Thin Client Configuration Via the menu item configuration a file with the current configuration settings can be imported or exported The storage location where the configuration file have to be exported or from where the file have to be imported substantially depends on from where this menu is activated If you work locally on the device you first have to integrate a drive network drive or local drive such as USB flash drive which serves as storage location If you using a web browser on another computer to access this menu the local hard drive is offered as storage location For more information on integrating a drive see page 32 By clicking the button export configuration you will be aske
42. n All USB devices can be used by this way in the RDP session This is useful for example to include support for locally connected scanners and synchronization of smartphones For this the third party software is required For more information see http www usb redirector com For mapping the local drives to the thin client there are two ways With map all disks on a single letter all detected drives are shown as folders under a single drive letter Set up the drive letter in the drop down menu below Im 64 Rangee Thin Client Alternatively you can with map each disk on a different letter using RDP assigne every individual drive letter The detected drives are listed and each of them has a own drop down menu that lets you determine the drive letter Check the box enable printers mapping on the Thin Client printer will mapped in the terminal session You can also choose the default printer in the drop down menu default printer Deaktivate Animation and the Thin Client wouldn t show every step while scrolling Only the final result will be displayed If show window while dragging is aktiveted the Client try to show every step by dragging a windo with the cursor With the settings desktop background and themes the desktop background and individual themes can be enabled or disabled F rongee MAA Verbindungsname Serversuche Vertuegbare RDP Server Server Port Nutze Samba Logindaten Benutzer Kennwort Dom ne Anwendung
43. nection By using several monitors like dual head or quad head it is also here necessary to establish the appropriate dual head or quad head options Here you can specify whether the session will displayed at every monitor or if you want to distribute the session on two or more monitors The standard color depth is setting on 256 color But you can easy change it in the corresponding drop down menu The sound output is by default No sound output Data compression and Encryption are desabled by default With the option Fullscreen mode the window size of the RDP session will display the whole screen This option is enabled by default Depending on your needs you can set a connection ending option to tell the Thin Client should behave when ending the connection Here you have a choice between Reconnect and Shutdown client The RDP connection can be configured to start automatically after booting the device Confirm your settings by clicking Apply again With force bitmap updates the Thin Client invites screen content after each action This option stop display errors but this feature is resource heavy Therefore by default this option is disabled Static graphical components in the screen content can be cached with Persistent bitmap caching faster You can also set a start delay if you want to establish the connection after the bootup time The Thin Client then waits from the registered value in seconds to establish a connection This can be
44. ns The configuration pane Global ICA settings includes connection parameter that can be issued to ICA Session on their creation The option Activesync recognizes via USB connected PDA in ICA Sessions and is able to use server based applications like Outlook to synchronise Please consider the appropriate server configuration see page 42 By activating the option Get server via DHCP the entries for the server group can be distributed by the DHCP server For this to work TAG ID 75 as character code string with lt IP Adress gt as vale needs to be configured on the DHCP server The option Third mouse button acts as Control v configures the middle mouse button that only data that has been copied to the clipboard will be pasted at the correct position Compress lowers network traffic and needs to be activated on the server side as well It can have a negative effect on slower servers and will impact the performance and cause problems Disable Sound disables sound transfer in the ICA session Slower networks should use this option to limit the traffic the sessions create Serial ports can be mapped into the ICA session by activating the corresponding option Two options are present for mapping connected drives With Map all disks on a single letter all detected drives will be displayed as folders in one single drive letter The dropdown menu allows you to chose the letter to assign Alternatively by using Map each disk on a different
45. ns Shift Ctrl Alt N Shows the current network setting Shift Ctrl Alt C Zeigt die laufenden Prozesse an Shift Ctrl Alt F Reset to factory default Shift Ctrl Alt M Shows the Audio Mixer Shift Ctrl Alt K Opens the Kommbox Shift Ctrl Alt R Restart the device Shift Ctrl Alt V Shows the current OS version Ir 13 Rangee Thin Client 14 Rangee Thin Client Administration of the clients Using the Kommbox you can adjust all the settings according to your requirements Overview The administration of Rangee Linux thin clients is based on an internal web server So you have a uniform user interface whether you make the settings from the distance remote or on site local The internal web server will start with the Kommbox You Il find further information about the remote administration on site 20 On the menu item Setup you can log in to the Kommbox For this pleas use the following access data User name administrator Password engels After a successful registration as administrator the Kommbox offers different options which you can found in the form of a menu bar on the left side of the dialog box Details about the selected options are shown in the right part of the window Rangee Thin Client F rongee aman Name Passwort Picture 9 Kommbox registration With the quit button in the upper right edge of the window you log outof the Kommbox So th
46. nung Quadhead Modus Touchscreen Typ w hlen Keiner x X TCP Port ffnen m zur ck weiter Einstellungen testen Testen Picture 4 Setup Wizard screen settings Network The following configuration menu allows you to configure an Ethernet or a wireless LAN port You can also use more ports that are available onboard as well as in the form of PCI and PCMCIA or as USB port Every found port is shown in network devices and can be configured in an approriate menu by selecting the specific network The host name is used as host name by Unix Linux systems and as client name in ICA or RDP sessions The default host name is the name mac and the corresponding MAC address of a device Rangee Linux supports W7P Timeserver Once configured the Rangee thin client gets the current date and time information from the stated server If you need more fonts as the integrated Rangee Linux offers you an link an external font server by entering the IP address In this form you also can enter a DNS server and additional an alternate DNS Server Ir 10 Rangee Thin Client L rongee i ore Ena nn lanO 192 168 255 144 Desktop Konfiguration TCMS Einstellungen Tastatur Sprache Hostname mac 001BB9C33t Bildschirm Domainname rangeelocal Verlassen DHCP Client udhcpc benutzen Vv Arbeitsgruppe ihinclients Zeitserver 1311883221 Fontserver fis2 168 2551 1 DNS Server 192 168 255 254 2 DNS Server 192 16
47. ork printer With the button new network printer you go to the configuration menu of a network printer Under printer description you can give the printer a unique name Enter the server printer name the name of the print queue or share name of the printer Also here the default printer name New Printer is used if no other name is registered Under Server printer drivers enter the server printer driver name Depending on the network environment four different connection types are available e CUPS Printer IPP CUPS Common Unix Printing System is a daemon that provides printing services for the differnt UNIX operating systems CUPS uses the IPP protocol Installed on Unix Linux server printers can be connected via this protocol Do you want to print from a Windows workstation on the Thin Client locally attached printer then set up a new network printer in Windows and enter the following URL address below to make the connection with the printer http lt IP AdresseThinClient gt 631 printers lt Druckername gt Ir 43 Rangee Thin Client e Windows Printer SMB If a printer is installed on a Windows server seleced this mode for connection type SMB Server Message Block is a communication protocol including for printing services in the network e Unix Printer LPD The LPD protocol Line Printer Daemon manages and sends print jobs over IP networks LPD is the predecessor of CUPS Installed on Unix Linux server printers
48. ow during system startup which system components are initialized and started For efficient retrieval of I O devices select the JRQ polling during the boot progress Alternatively also DMA Direct Memory Access to be activated F rongee nen Boot Datei ACPI Deaktivieren Video Mode DMA Deaktivieren IRQ Polling Picture 42 Kommbox Tools Boot Configuration set timeout 1 insmod font insmod terminal insmod vbe insmod gfxterm menuentry Firmware linux bzlmage console ttyid root dev ram vga 788 ide nodma eddroff quiet tandard Di 52 Rangee Thin Client Touchscreen Calibration After the touch screen has been defined it must be calibreated For this you have to select the device type By clicking ca ibreate the touch screen calibration starts automatically Now you have to touch differently positioned crosshairs to align the touch panel as much as possibly F rongee Picture 43 Kommbox Tools Touchscreen Calibration Rangee Thin Client Hide Mouse Cursor Some applications doesen t need tht mouse cursor So you can adjust the configurationt that the mouse is hidden Than the mouse cursor will the next time reboot shifted in the lower right corner and is thus no longer visible The Administrator can undone this setting via remote administration Rangee Thin Client Configuration of Connections This chapter describes the connection types on the Rangee Thin Client a
49. re If you still have questions please contact your retailer or the Rangee support Rangee Thin Client F rongee MAA ICA i ROP Internet i Feeefox ca WTSACA VMWare View Chert ai rdesktop WTS RDP vrmwarewew VDi Verbindung Bild 45 Kommbox Verbindungs bersicht Rangee Thin Client ICA ICA is the abbreviation for Independent Computing Architecture This networking protocol is used in Citrix Server environments Klicking ICA on the left menu will open the ICA Configuration Menu There you can chose between the different options G oba Settings new ICA Connection and new PN Agent XenDesktop Connection Already configured ICA connections will be listed directly below Those can be edited or deleted via the corresponding buttons F rongee WTSJCA Picture 46 Kommbox ICA Configuration Global ICA Settings Devices that are connected via USB to the Thin Client like PDA with Palm OS Windows CE Net and Windows 2003 mobiles can be synchronized on ICA Sessions with server based applications like MS Outlook Prerequisite for using this feature is Windows 2003 Server with Citrix Presentation Server 4 0 and Active Sync as synchronisation software The Citrix website can give you more pointers for installing Active Sync on a terminal server Im 58 Rangee Thin Client The settings for the ICA session are made in the G oba Settings for ICA sessions Please concact Rangee Support if you have any questio
50. re available and how to set up 55 Rangee Thin Client Overview The menu button Connections in the upper right area is the central administration tool for all types of connection The administrator have the oportunity to configure the connections local and via remote access The configuration of connections is done in this menu item Configuration settings are changed in the menu of Kommbox eg for ICA and RDP or the configuration settings of the respective client software eg NX and terminal emulation Please make sure before you set up a connection all the setup settings of the device such as Keyboards printers and disk drives have been completed Available Connections All available connections are listed within the Kommbox in the connection overview on the left side of the screen and are dependent on the type of Rangee Thin Clients Additional connection software can be installed if required The user get a list of all configured connections within the Kommbox to start it up by clicking the button Depending on the setting the user will see the connections as icons on the desktop or in the program bar Using these inputs the particular connection can be started In the following the installation and configuration of the most used protocols RDP and ICA are discussed The setup and configuration of other compounds is analogous to the creation of NX connections For details please see the documentation of the connection softwa
51. remaining thin clients can then install the firmware and all software modules that are installed on the reference model The option yes force master can only be used if you manage Rangee thin clients by using the remote management software TCMS With this option the thin client is entered as update server at all other thin client within a group Its own update server settings are preserved and stay unchanged Please confirm your settings with accept Ir 23 Rangee Thin Client F rongee Zn Protokoll Abweichender Port Server Verzeichnis Download Versuche Benutzer Kennwort Proxy Proxy Port Proxy User Proxy Passwort Downgrade blockieren Cross Updates blockieren Picture 16 Kommbox update server settings Next to the button update server settings you can now see the update server you have entered Otherwise an error message appears In that case you should check your entries again Run software update At the drop down menu next to the individual modules you now have to select the modules which should be changed It is possible to delete a software module or if available on the update server to install a newer version The standard setting is that no change takes place Confirm your settings after careful consideration with accept You will then be asked to restart The relevant update files will be loaded and installed automatically during the next boot The display gives you detailed infor
52. screen All settings be active after taking over and after a restart The screen saver is stopped by pressing any key or mouse movement A rongee maka Bildschirmschoner nach Minuten aktivieren 0 nie Computer nach Minuten herrunterfahren 0 nie Modus Logo Bildschimschoner Bild andern _ Datei aden TCMS Einstellungen nicht bernehmen Picture 22 Kommbox screensaver settings Im 31 Rangee Thin Client Drives Under drives the Rangee Linux offers the ability to connect network drives and local drives Important Local drives that are connected to the thin client have to be FAT32 formatted By clicking on new network drive the configuration menu for connecting a network share will open At name of assignment the network share is given a name Which protocol is used for the data comunication is specified at protocol When selecting a protocol you have to consider on which system the network share will be connected If the drive integration is performed on a Windows system the protocol which communicates by default on port 139 has to be SMB Server Message Block If the drive connecting is on a Unix Linux system the communication protocol will be VFS Network File Service NFS is by default using port 2049 for the data communication With the option CIFS network shares can be connected within a Microsoft Windows Active Directory Satu Verbindungen Tools Brendon F rongee
53. t your access data for a secure access to the update files Short time later you will receive an email with the appropriate access data for our download server Upon request Rangee sends you the support CD with the latest modules For questions on this please contact your retailer or the Rangee support Prepare software update Software updates should be performed only if necessary and if necessary after consulting the Rangee support At Software Update you find a list of the installed software modules First you have to configure the device at update server settings and show where it will find the update modules The access to the update server can either take place via the http or ftp protocol Again you have the options to enter a different port Next specify the server and the directory containing the new modules Finally enter your username and password to ensure an authenticated access to the update server For FTP updates this is mandatory For HTTP updates this is optional With block cross updates you ensure that single firmware versions stay installed on the thin client and not standardized by using the TCMS Each Rangee Thin Client can serve others Rangee thin clients on the network as the update server By selecting Yes you enable this feature Therefor you have to enter the IP address of the thin client which will serve as update server at the other thin clients on the network as update server Enter the directory update The
54. te data to media allowed or on the blacklist to be excluded To get the vendor ID connect the local drive on the thin client and get it under Tools5 Information about Drives There are information about which local vendor ID or by what name the local drive registered to the system This Vendor ID or the name of the device you enter into the field of the filter For more information on drives see page 48 Rangee Thin Client A rongee Automatisches Einbinden von lokalen Laufwerken Schreibzugriff f r automatisch eingebundene Lautwerke Kameraunterstutzung Freigeben von automatisch erkannten Laufwerken uber Samba Fitter TCMS Einstellungen nicht bernehmen Picture 25 Kommbox Global Drive Settings Network Devices In this section you can configure the settings for the serial ports on your machine Choose the port you want to configure and click edit Customize the parameters of flow rate character length in bits parity and 2 stopbits to your needs The flow control can be set for the hardware or the software side With the option 7CP redirect it is possible to appeal the serial port via LAN connection By default the 7CP Port is set to 2000 The Mode determines the type of transmission You can choose between Te net Modem and Raw Rangee Thin Client A rongee Pont Geschwindigkeit Flu kontrolle Zeichenlange Parn t 2 Stoppbits TCP Weiterleitung Modus TCP Por
55. the user Rangee Thin Client F rongee ee Verbindungen Verbindungsname RDP Tunnel aufbauen Frefox a Viga Crees Tunnel verbindungs ID DNS Name des Connections Server Benutzername Passwort Domane Desktop Name RDP PCOIP Roe Te Auflosung Fuliscreen Alle Laufwerke unter einem Buchstaben zusammenlassen Lautwerksbuchstabe Jedem Laufwerk einen eigenen Buchstaben zuweisen 71 Advanced Administration This Chepter contains mor information about remote acces to a Rangee Thin Client Remote Administration via HTTPS Cause of the built in HTTPS webserver the administrator have the possibility with every webbrowser in the network connect to the Rangee Thin Client So he can remote changed the configuration of the Client without disturb the user in front of the Client To connect to an Rangee Thin Client type https lt IP Adresse gt in the adress line of your webbrowser If no more access rights were granted only the administrator have the access to log in To log on the client the administrator have to switch to the Setup menu and sign in the name and passwort After this he can change every configuration rangee Thin Client Manager Mozilla Firefox Datei Bearbeiten Ansicht Gehe Lesezeichen Extras Hilfe gt SO A O https 192 168 255 45 avyjO aola Kostenlose Hotmail Links anpassen Windows Media Windows FE rongee E Informa
56. tion Benutzereinstellungen Angemeldeter Benutzer administrator Desktop Konfiguration EEE Sie haben den Status administrator Remote Administration a a Software Aktualisierung IP Adresse n 1921168125545 Konfiguration Tastatur Sprache MAC Adresse n 00 16 EC D8 53 06 Datum und Uhrzeit A ica 9 15 nx 2 00 rdesktop Bildschini Installierte Software 1 58 xdmep 1 01 Dildarkimaakaune Fertig 192 168 255 45 Start EQ 1 rangee fm E Range fm Siemen B Drucker u Adobe Ph DE 15 54 Picture 58 Remote Administration via Webbrowser Desktop mirroring via VNC Another option for remote administration the Rangee Linux offers by remote access via VNC VNC provides the administrator the ability by using a previously established VNC password to mirroring the screen on the remote computer to his own eg under Windows using a VNC viewer Depending on the settings the user get a message that a remote access via VNC has been started Someone is about to VNC you okay F nongee amp Information W Banutzereinstellungen Angemeldeter Benutzer administrator Desktop Kontiguration e a Sie haben den Status administrator Wi Remote Administration Wi Software Aktualisierun g 192 168 255 141 Gi Tastatur Sprache ii Datum und Uhrzeit nee 00 14 2A 2D B8 04 5 Bildschirm Installierte Software f 1 Bildschirmschoner rdesktop Wi Laufwerke Wi Netzwerk EI Drucker
57. useful if the thin client start up connections in a specific order ni 66 Rangee Thin Client At end of connection the user can choose between different actions These actions can be fixed within the configuration or selected by the user F rongee a Verbindungsname Serversuche Vertuegbare RDP Server Server Port Nutze Samba Logindaten Benutzer Kennwort Domane Anwendung Arbeitsverzeichnis Numlock synchronisieren Fenstergr e Picture 52 Kommbox new RDP Connection Mozilla Firefox The softwaremodul Mozilla Firefox makes it possible to use the free webbrowser locally on your Thin client In the Global Settings you can define the behavior of the browser if it should save its settings via Save preferences All settings and customisations e g certificates of websites or the history of visited websites will be saved and still be available on the next start of the browser Language lets you define which language layout you want to use Different Modes allow the browser to function more or less in the way the User wants The Kiosk Protokoll Whitelist defines the standart protocol of the webbrowser To open a https based Homepage the Whitelist needs to be adjusted Z 67 Rangee Thin Client F rongee AA Einstellungen speichern 4 Sprache Deutsch Modus Norn al http Kiosk Protokoll Whitelist Picture 53 Kommbox Global settings Mozilla Firefox To create a new conne
58. zwert 0 10 Smartcard Unterstutzung aktivieren TCMS Einstellungen nicht bernehmen Picture 19 Kommbox keyboard language Date and time Before you edit date and time you should set the time zone If your system is configured to optain the settings for date and time from a time server these settings will be synchronized with the specifications of the server when the Rangee thin client ist connected to the network The setting for the time server can be found under the menu item network You can also enter the appropriate values in the dialogue time and date manually by selecting the desired values in the various drop down menus and finally clicking apply If the system does not take the time check the system time in the BIOS and set it if necessary to the GMT time Ir 28 Rangee Thin Client Satu Verbindungen Tools Brendon F rongee Region Stadt Datum Format TT MM JJJJ Uhrzeit Format SS MM SS Picture 20 Kommbox date and time screen Via the configuration dialogue screen the video output of the device is adapted On delivery the device starts with a resolution of 800 x 600 pixels and a color depth of 16 bits The configuration method defines how the screen settings can be configured With the drop down menu you can choose between automatic manual and user defined configuration If you choose the automatic configuration all possible configuration settings on the graphic card in conjunct

The Setup Wizard

Contents

Download Pdf Manuals

Related Search

Related Contents