MPRE DUAL
Contents
1. ok but lower gain for that channel if lights continuously 7 XLR INPUTS Connect to any microphones Switch to phantom power only if requires for either channel Since this activates 48V phantom power to both channels make sure other mic connected will not be damaged by phantom power 8 LIMITER BUTTON Push for added 15dB of limiting on both inputs simultaneously For best sound use only sparingly as needed SPECIFICATIONS Inputs Channel amp Channel 2 XLR Balanced Inputs Maximum Input 250 mV Limiting 15 dB Selectable Input Impedance 10K Ohm Maximum Gain 50 dB THD lt 0 01 Output Impedance 300 Ohm Maximum Output Level 3 5 V Connections Input 1 amp Input 2 female and Output 1 amp Output 2 male XLR jacks Power Supply Single 9V battery Current Drain Phantom Power Off 24 mA no signal 27 mA max signal Phantom Power On 27 mA no signal 40 mA max signal Case All Aluminum case with robber feet Dimensions W x Hx D 132 x 54x 145 5 mm Weight 580 g2. MPRE DUAL Dual Channels Microphone Preamp PULSE MPRE DUAL Dual Channels Microphone Preamp MPRE DUAL Dual Microphone Pre Amplifier Thanks for purchasing the PUSE MPRE Dual Microphone Pre Amplifier The MPRE DUAL is a dual channel mic preamp which works with any professional microphone offering all the features of two preamps in a small convenient package It is perfect for all live sound and digital and analog recording FEATURES 1 Unsurpassed audio with excellent stereo imaging ultra low noise superb transient response and transparent distortion free sound 2 Includes XLR I O jacks Power OFF ON 48V Phantom Power 3 way switch selectable integrated limiter dual gain controls Power ON and dual Peak LED indicators 3 Rugged lightweight all metal enclosure with robber feet designed for CONNECTION S amp OPERATIONS 8 OUTPUT 2 OUTPUT 1 9V BATTERY 2 3 1 5 6 1 BATTERY COMPARTMENT Uses single 9V battery as power supply 2 POWER SWITCH 3 way switch to select a OFF b ON without phantom power supply c ON with 48V phantom power 3 XLR OUTPUTS Connect to mixer or amp input 4 POWER LED Indicates the unit s wording status The LED will light on when the unit is on 5 GAIN CONTROLS Adjust gain for Channel 1 and Channel 2 respectively 6 PEAK LEDs Channel 1 and Channel 2 indicators light 5dB below clipping Occasional flickering on peaks is
Download Pdf Manuals
Related Search