Quick Start Guide - AC Lighting Inc.
Contents
1. seconds to reset all menu items to factory defaults DMX address 001 Control Mode 1 DMX Lost Hold Look Store default Time Triggers deleted Display On Frequency 600 Frequency In this mode four frequency settings are available 360 600 1200 2400 which allows for the LED scan rate to be synchronised with the video camera and avoid a flickering effect Time Triggers Set Day and Time Display Backlight Reset to Default 6 Further Information Please refer to the Chroma Q Color Span 2 user manual for more detailed information A copy of the manual can be found at the Chroma Q website www chroma q com under Support Chroma Q Color Span 2 Quick Start Guide2. 4 446000 Tel 1 416 255 9494 Fax 44 0 1494 461024 Fax 1 416 255 3514 Support chroma q com Support chroma q com For further information please visit the Chroma Q website at www chroma com Chroma Q is a trademark for more information on this visit www chroma q com trademarks The rights and ownership of all trademarks are recognised Chroma Q Color Span 2 Quick Start Guide Quick Start Guide Color span 2 Chroma Q Color Span 2 Quick Start Guide Chroma Q BRILLIANT SOLUTIONS For a full product manual please visit www chroma q com PN 633 0501 1 Overview The Chroma Q Color Span 2 is a configurable low profile ultra bright LED indoor cove lighting and wall wash system for wide ranging applications 2 Safety A This product is for professional use only It is NOT intended for domestic use The bright flash of light during power up and continuous strobe effect may cause epileptic seizure Caution 3 Chroma Q Color Span 2 Fixture Unit The Color Span 2 fixture comes in lengths of 400mm 16 with 16 LEDs 800mm 32 with 32 LEDs and 1200mm 48 with 48 LEDs The Color Span 2 fixtures of various lengths can be combined and connected via the RJ45 in out connectors for power and data The total lengths of the combined fixtures must match the corresponding power supply output 4 Chroma Q Color Span 2 Power Supply Units The Color Span PSO2 PSO6 and PS18 are power supply units which can be remo
3. Approvals amp Disclaimer CE The information contained herein is offered in good faith and is believed to be accurate However because conditions and methods of use of our products are beyond our control this information should not be used in substitution for customer s tests to ensure that Chroma Q products are safe effective and fully satisfactory for the intended end use Suggestions of use shall not be taken as inducements to infringe any patent Chroma Q sole warranty is that the product will meet the Chroma Q sales specifications in effect at the time of shipment Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted Chroma Q reserves the right to change or make alteration to devices and their functionality without notice due to on going research and development The Chroma Q Color Span 2 system has been designed specifically for the professional entertainment lighting industry Regular maintenance should be performed to ensure that the products perform well in the entertainment environment If you experience any difficulties with any Chroma Q products please contact your selling dealer If your selling dealer is unable to help please contact support chroma q com If the selling dealer is unable to satisfy your servicing needs please contact the following for full factory service Outside North America North America Tel 44 0 149
4. Menu Function Home Shows the Name Software Version current DMX address control mode and time Control Mode PSO02 PS06 PS18 Power Supply Units Software Version 1 6 Mode Name ch Grouping Description 2 6 18 x Red Green Blue w Magic Amber Cast o AL xofecis Fue Saturation tensiy 1 x Red Green Blue w Magic Amber 8 24 72 8 Variable owo Sanao effects sequence Magic Amber is the term used for the unit s ability to bring in Amber when mixing colors that require it 1 x Red Green Blue Intensity C 8724772 E 2 ae When DMX is Lost In this mode various options can be selected when DMX is not detected Look Store In this mode 42 internal FX Looks are available for stand alone operation 1 9 are preset Looks can be recorded to the internal flash memory and will be preserved on power down Looks will be returned to default upon reset To record a Look with a DMX console set the PSU to Control Mode 1 use the DMX console to create the desired effect scroll to Look Store number and save the Look to that number Refer to the Color Span 2 User Manual to record a Look in Standalone mode Select Time Triggers from the menu then toggle between Day Hour 24 Minutes and the Look to be triggered select Set Day and Time from the menu then toggle between Day Hour 24 Minutes Select Displ Backlight from the menu then toggle between On permanently or Off after 5 seconds Press Enter for 2
5. tely controlled via ANSI E1 11 USITT DMX 512 A XLR 5 pin and available with outputs via RJ45 connection Color Span PS02 is a power supply with 2 outputs which can be configured for up to 2 full size 1200mm 48 48 LEDs Color Span fixture units or 2 800mm 32 32 LEDs Color Span 2 fixtures or 2 400mm 16 16 LEDs Color Span fixtures or combined daisy chained to match each output Color Span PSO6 is a power supply with 6 outputs which can be configured for up to 6 full size 1200mm 48 48 LEDs Color Span fixture units or 6 800mm 32 32 LEDs Color Span 2 fixtures or 6 400mm 16 16 LEDs Color Span 2 fixtures or combined daisy chained to match each output Color Span PS18 is a power supply with 18 outputs which can be configured for up to 18 full size 1200mm 48 48 LEDs Color Span 2 fixtures or 18 800mm 32 32 LEDs Color Span 2 fixtures or 18 400mm 16 16 LEDs Color Span fixtures or combined daisy chained to match each output Caution The total lengths of combined Color Span 2 fixtures must not be less or more than the power output of the power supply unit The power supply unit will be damaged if the total length of combined fixtures is not matched to the corresponding output used A POWER TERMINATOR must be connected to the last fixture in the combined daisy chained configuration series Output and Cabling Configurations The PSO2 PSO6 and PS18 have 3 output configurations for up to 6 fixture configura
6. tions Each RJ45 output connector of the Color Span PSO2 PSO6 and PS18 are color coded to indicate the appropriate number and or combination of Color Span 2 fixture units Output Connector Number of LEDs Color Code in the fixture BROWN Fixture Length 400mm 16 ORANGE goomm 732 YELLOW 1200mm 748 Output Configuration 2 6 18 outputs x 48 LEDs fixture or 2 6 18 outputs x 82 LEDs 16 LEDs fixture or 2 6 18 outputs x 16 LEDs 16 LEDs 16 LEDs fixture PS02 PS06 PS18 Yellow dianie 2 6 18 outputs x 32 LEDs fixture or 9 2 6 18 outputs x 16 LEDs 16 LEDs fixture Po Brown 2 6 18 outputs x 16 LEDs fixture Note Damage may occur to the fixture if the size is not matched to the coded outputs Chroma Q Color Span 2 Quick Start Guide 5 Control The Color Span 2 system can operate as a stand alone unit or controlled remotely via ANSI E1 11 USITT DMX512 A through the power supply Refer to the user manual for full details Control Menu is accessed via the LCD display and the following controls Right hand button Arrow Enter hold for 2 seconds to save Left hand button Exit Exit without saving Centre pressure slide pad Adjusts or scrolls through the menu items To access Control Menu items 1 Use the slide pad to scroll through the menu items 2 Press Enter to select the menu item 3 Use the slide pad to scroll through the options 4 Press Enter for 2 seconds to save the settings Control
Download Pdf Manuals
Related Search