FCC Certifications CE Mark Warning
Contents
1. Only Read access for all users Y Peadivyrite access for all users a Non access amp Read only Read amp write quest 3 Y Non access Y Read only Read w rite all 3 Y Non access Read only O Read write SE power 38 FTP The Personal Server support FTP functionality for users to access and up download files with FTP software FTP Configuration Setting FTP Configuration Click FTP Configuration to set up the configuration such as user limitation Service port number Length for timeout and anonymous user restriction Items Meaning How to Maximum Unit Maximum concurrently connected Fill in a number from 1 to 5 number FTP users Port Number Decide FTP Service port Number as Enter the FTP Port number A default port number 21 is configured if there is no specified number been configured Note Port 80 is not allowed to setup for it has been configured as the port for accessing the WEB based management interface Timeout The FTP time out length Enter the length you want A default 15Min is configured if there is no specified time been configured Allow Anonymity Allow anonymous user account to Choose Yes to enable or no to disable login Notes 1 The maximum number of unit is up to 5 2 The port number is between 1 and 65535 Penner pi Allow Anonymity Note To add anew FTP account please add a user in user configuration under the page Share then enable the privilege to access FT2. Auto Networking Configuration Utility for Windows OS Supports CIFS SMB for Microsoft Network remote users easily retrieve files by using My Neighborhood Compatible with Windows 95 98 98SE ME XP 2000 NT4 0 Linux MAC OS Provides one reset to factory default button Support firmware update from Web based User Interface Ul Provide three Pre defined User levels all power guest for accessing HD Provides five online users of Samba Concurrently connected and five online FTP users Concurrently connected Auto detect HD for new installed HD Only for the 1st EXT3 partition Provides Password security for WEB management amp HD Access FCC CE VCCI Class B Unpacking Information Thank you for purchasing this product Before you move on please verify your package contains the following items One Personal Server Hard Disk not Included A 2 One Power adapter 3 One QIG 4 One Utility Manual CD ROM 5 Rubber foot x 4 6 screws for HD Fastening x 4 Hardware Guide Power Button To activate the Personal Server Press this Power button after connecting the device to an appropriate power outlet with the provided power cord To power off press the button for two seconds until Power LED start to blink LEDs Definition Poner On ON OFF Power adem Ethernet Connected Ethernet Not Connected Ethernet Data transferring Ho Data Transfer a Rear Panel Reset Button To restore the default
3. Enable BitTorrent amp Yes No Download Folder r Max Active Torrent Number Schedules eve ONG 45 ca pus BitTorrent Configuratin File fTovent 41 Download Configuration This page is provided for users to enact a download task and also shows the downloading information The explanations for each item is shown as following Sel The check box for users to select the desired download task Torrent File Names and status hyperlink for each Torrent file D L Downloaded percentage Size MB The size of the data Start time The time that download starts Rate Down UP The download upload speed Max Rate Down UP The MAX download upload speed A oe OA AE Mote Start Time Date and time to start downloading Downloading Sel Torrent File D L Size MB Start Time Rate Down Up MAX Rate Down Up Mo downloading files Waiting for downloading Sel File Name Mo queuing files Click Add to add a new download process Click Inactive to remove the process you select from the list Hote 42 To add new downloading tasks 1 To add a new download task place Torrent files in the folder you specified as the download folder Select the files that waiting for download then click add P2P Note Check the Sel and then click Inactive button to cancel this queue Downloading Sel Dil h Size MB Start Time Rate Down Up MAX Rate Down Up do downloading files
4. SuperUser name Username of the Personal Server administrator to access the Web based Ul Old Password Enter your old password here New Password Enter the New Password here Confirm Password Enter the New Password again to confirm Please provide superuser name and password from 4 to 16 characters Regularly change username and password to ensure security 28 IP Filter The IP Filter functionality provides access management by IP address filtering There are three modes for configuration 1 Disable Disable the IP Filer function All IP addresses are allowed to access the Personal Server 2 Allowed Setup the IP addresses that are allowed to access the Personal Server Only the configured IP addresses have the right to access the Personal Server 3 Denied Setup the IP addresses that are denied to access the Personal Server The IP addresses that are configured are not allowed to access the Personal Server Check IP if allowed or disallowed to acccess through SAMBA and FIP IP Access Check IP Address 1 IP Address 2 IP Address 3 IP Address 4 IP Address 5 IP Address 6 IP Address 7 IP Address 8 IP Address 9 IP Address 10 29 MAC Filter The MAC Filter functionality provides access management by MAC address filtering There are three modes for configuration 1 Disable Disable the MAC Filer function All MAC addresses are allowed to access the Personal Server 2 Allowed Setup the MAC addresses that are allow
5. Waiting for downloading 2 Select the files for download then click next P2P Please select the BitTorrent file Index of Share dtettnang sre s6_64 iso torrent E dtettnang xs6 64 DWD torrent Note Click Next to continue the configuration 3 Specify the folder for placing downloaded data then click next Please verify that the folder should be within the folder you place Torrent files P2P Please select the download folder Click Next to continue the configuration 43 4 Check the download environments then click Apply to finish the procedures The meanings for each item is listed as follows Listen Port The port number of the P2P program Time to Leave The allowed time to process a download task The task will be terminated as the time passed Max Peers Count Setup the MAX Peers when proceeding up download Min Peers Count Setup the Min Peers when proceeding up download Max Download Bandwidth The MAX allowed download Bandwidth Max Upload Bandwidth The MAX allowed upload Bandwidth Note A peer is a connection processing upload or download between nodes Notes Download options are as follows 1 The waiting period is the integer under 72 hours 2 Max and min peer is between 1 and 10 3 Max and min bandwidth for download is between 1 and 2097152 Kbps EIA RO un o Tmetoleve P bow 5 The proceeding task and the relative information will be shown on the downloadin
6. connects with a router with DHCP Client As for the setting Please refer to the IP Protocol Setup Chapter O The system is down Reboot the system with Web based UI or press the Default Button to restore the factory default setting and reboot 3 The Personal Server can t find my HD and the Home page of Web based Ul display that the HD unable to use Ans There are some possibilities O The HD is broken Please change another HD a The HD jumper is not set as Master Your HD jumper should be set to Master Different Hard Disk has different jumper settings please refer to your Hard Disk manual for more information a The HD is unformatted Please format it with our HD Format tool in Administration a The partition format of HD is not EXT3 ex NTFS Please format it with the provided Format tool in Administration 4 use Personal Server as a Web FTP server but the users that outside the LAN can t access it Ans To use Personal Server as a FTP server without fixed IP or domain name please setup your DDNS and Port Mapping of router IP Sharing first As for the setting please refer to the DDNS and Port mapping in your router s Manual 5 can t access the Personal Server Ans a Check the LAN LED of Personal Server and make sure that it s Green O The system is down Reboot the system with Web based UI or press the Default Button to restore the Factory default setting and reboot a When the concurrently connected users ar
7. network protocol Windows 98 Me 1 Click on Start gt Settings gt Control Panel gt Network Network Client for Microsoft Networks Dial Up Adapter SURECOM EP 320 S 100 10M Ethernet PCI Adapter 3 TCP IP gt Dial Up Adapter Client for Microsoft Networks 2 Click TCP IP gt Your Ethernet Adaptor then click Properties Dial Up Adapter SURECOM EP 320X S 100 10M Ethernet PCI Adapter y 4 TCP IP gt Dial Up Adapter SURECOM EF 320 5 Client for Microsoft Networks 3 Click IP Address and click on Specify an IP Address ILP IP Properties 192 168 1 2 elMask 255 255 255 0 9 Click OK and OK Now the system may ask for your Windows disc follow the steps then restart your computer How to configure the TCP IP network protocol Windows 2000 1 Click on Start gt Settings gt Network and dial up connections EJ Network and Dial up Connections Hp x File Edit View Favorites Tools Advanced Help Bak gt Ey search LyFolders History GE X A Er Address 3 Network and Dial up Connections 0 e Eu a 1 cH 1 J to Ta Make New Freeserve Local Area Network and Dial Connection Connection up Connections This folder contains network connections For this computer and a wizard to help you create a new connection To create a new connection click Make New Connection To open a connection click its icon To access settings and componen
8. page C eng 2 a E Fi p i 3 h x 7 70 IT WE AL AL Ae FEAT ED aw a a LA IL A Administration SUELO Web Server IP Address 10 10 0 54 Version v1 00 07 06 2005 Click here for more information Configuration Networking network setting Host Name IP Address Superuser Passwaord IP Filter MAC Filter Administration system setting Restart System HO Format Factory Default Reset Firmware Upgrade aystem Time Character Set share users and folders access setting User Configuration Folder Configuration FIP FTP login setting FUP Configuration P2P P2P setting BitTorrent Configuration Download Configuration WEB Server WED Server setting WEB Server Configuration 25 Status Detail To see more info about the Personal Server such as HD used Up time samba users and FTP users please click the Click here for more information IP Address The current IP address of the Personal Server HD used the usage percentage of HD Total amount of HD Up time the estimate time that you power the Personal Server on Samba Users the number of members who is currently using the Personal Server FTP Users the number of members who is currently using the Personal Server by FTP client m Check if the Unicode been loaded in the Personal Server Note 1 The Personal Server provides the Maximum five online users of Samba and five online FTP users 2 Please no
9. router s DDNS and Port mapping Virtual Sever first As for the setting please refer to the DDNS and Port mapping in your router s Manual 48 Download The Personal Server provides more convenience for P2P downloading The Scheduler functionality allows users to set up the time for downloading hence enables users to avoid downloading files in bandwidth rush hours Also after giving a download command users are allowed to download files without keeping your PC powered on WebServer For users wish to share files via their website the embedded Webserver provides a easier solution Users don t need to worry about the limited size provided by ISP It will be even easier by using the website template we provide With properly locate your files and data it s just a snap to share your favorite photos pictures and whatever you want to show your friends 49 Trouble Shooting Guide 1 How to shut down the Personal Server properly Ans To shut down the System properly press the Power button on the front panel for two seconds until Power LED blinks then go off 2 The Quick Setup Wizard can t configure My Network setting Ans o Make sure that your RJ 45 cable is connected with the Personal Server and your PC Switch a Check the LAN LED of Personal Server and make sure that it s Green a Check the power of the Personal Server PC Switch and make sure that it s on a Check your PC s IP address make sure that it has a static IP or
10. setting press the button to activate e8 880000 LAN Port Connected with the RJ 45 cable Power Supply External power adapter DC 12V 3A IP Protocol Setup Configuring the network protocols For users to launch the device easily we provide a convenient Express Setup Wizard which detects the Personal Server automatically in your LAN To function the Wizard correctly please make sure that your PC DOES NOT obtain IP address automatically or the Wizard will not be able to initialize the setup procedure according to your network settings To solve the problem you can either specify your PC with static IP or connect your PC to a router with DHCP server embedded The following chapter indicates how to configure an IP address for your PC Users that have got a specified IP please skip this chapter to Hard Disk Installation for the next step How to configure the TCP IP network protocol of your PC Before the following IP protocol settings you have to get an IP address in advance If you don t have any IP address or you are not going to access the Personal Server via our Express Setup Wizard for your desire please choose an IP between 192 168 1 2 255 as your IP address Please DO NOT choose 192 168 1 1 for the IP address 192 168 1 1 has been set as the default for the network device In the following TCP IP configuration guide the IP address 192 168 1 2 is assumed to be your IP address How to configure the TCP IP
11. the HD socket Pin 1 is the red or pink strip on the edge of an IDE cable The IDE cable connector is designed to fit the shape of most HD connectors in one way 5 Push the power connector into the power socket of HD that shown below The power cable is designed to go in one way please check the shape for the correct installation Power Connector 6 Secure the Hard Disk with the provided screws 7 Push the Hard disk and HD holder back into the case and secure it with the two screws Quick Setup Wizard The Quick Setup Wizard provides an installation guide from cable attaching to the initialization of management Please follow up the steps below to proceed Note If you ve run the wizard before and there is currently any existing shortcut for accessing or managing the device please delete them to run the Quick Setup Wizard successfully Starting the Express Setup Wizard Insert the provided utility CD into your CD ROM The main menu pops up automatically You may read the user s manual by clicking View User s Manual or start the Setup Wizard by clicking Quick Setup Wizard Note If the auto run program is not activated please click on My Computer gt CD Drive then click the AUTORUN icon to start the main menu Personal Server a Ponda the best performance and quately Quick Setup Wizard View User s Manual M VJ P F Step1 Activate The Utility software Click Quick Setup
12. to access resources on a Microsoft network Show icon in notification area when connected 11 4 Key in the IP Address that you chose earlier The subnet mask is entered automatically on Windows XP Click OK Internet Protocol TCP IP Properties General You can get F settings assigned automatically if your network supports this capability therwise You need to ask pour network administrator for the appropriate IF settings Obtain an IF address automatically IP address 1192 1887 22 Subnet mask 255 255 255 0 Default gateway 192 168 1 254 2 Use the following DNS server addresses Preferred DNS server Alternate DNS server Now the IP setting of your PC is completed Please refer to the following guide to finish the Hard Disk installation and Express setup wizard 12 Hard Disk Installation Install a hard disk drive in the Personal Server 1 Loosen the two screws on the rear panel with a screwdriver Screws 2 3 Please make sure that the HD jumper should be located for Master operation mode Note that the jumper locations differ from each HD for the correct Jumper settings please refer to your Hard Disk manual for detail information 4 Insert the IDE connector into the IDE socket of the Hard Disk Make sure the pin 1 on the cable is connected to pin 1 on
13. 5 255 255 Dl Default gateway 192 168 1 2 O Obtain DNS server address automatically f Use the following DNS server addresses Preferred DNS server 1685 35 7 1 Alternate DAS server 168 96 192 Advanced 10 How to configure the TCP IP network protocol Windows XP 1 Ifyou are in Classic Start menu view click Start gt Settings gt Control Panel gt Network Connections If you are in Start menu view click Start gt Control Panel gt Network Connections 2 Double click Local Area Connection File Edit View Favorites Tools Advanced Help Q Back y r 5 P Search e Folders x 12 E Address e Network Connections v a Go LAN or High Speed Internet a My Network Places ES My Documents 3 My Computer Details Local Area Connec tion LAN or High Speed Internet Enabled SiS 900 Based PCI Fast Ethernet Adapter IP Address 192 168 100 5 Subnet Mask 255 255 255 0 Manually Configure SiS 900 Based PCI Fast Ethernet Adapter 3 Choose Internet Protocol TCP IP then click Properties and then click Use the following IP Address 4 Local Area Connection Properties General Authentication Advanced Connect using 89 515 300 Based PC Fast Ethernet Adapter Configure This connection uses the following tems El File and F El 005 Packet Scheduler Internet Protocol TCP IP Install Uninstall Description Allows your computer
14. 68 1 1 Realm Metwork HardDisk User Name admin Password er Save this password in pour password list Cancel Note If you didn t run the Quick Setup Wizard you should configure your IP address in the range from 192 168 1 2 to 192 168 1 255 Start your Web browser then type 192 168 1 1 to URL and press enter 23 Home Page The Personal Server is managed via a web based graphical user interface GUI that can be accessed with a standard HTML HTTP v1 0 compliant browser The Home page Ds SUES A oad ZRLDNIRE Home Administration Share IPAddress 10 10 0544 Version 1 0010 206 2005 Click here for more information Configuration Networking network setting Host Name IP Address Superuser Password IP Filter MAC Filter Administration system setting Restart System HD Format Factory Default Reset Firmware Upgrade System Time Character Set share users and folders access setting User Configuration Folder Configuration FTP FTP login setting FTP Configuration P2P P2P setting BitTorrent Configuration Download Configuration WEB Server WEB Server setting WEB Server Configuration 24 Home Status Host name the Identification of the Personal Server shows on My Neighborhood IP address the IP address of the Personal Server Version the Firmware Version Configuration Click the hyper link of each management items to quick link to each management
15. FCC Certifications HE This Equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CE Mark Warning C This equipment complies with the requirements relating to electromagnetic compatibility EN 55022 class B for ITE the essential protection requirement of Council Directive 89 336 EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility Company has an on going policy of upgrading its products and it may be possible that information in this document is not up to date Please check with your local distributors for the latest information No
16. If you want to backup C select Back postun honos HO DADES up Selected files folders and Driver IN a H neal 5 If you want to backup one Drive ex C select the drive by _______ Device Fle click the check box in front of the drive letter a m 6 Decide the destination of backup file Status ee 7 Type a name for this backup job and Click start Se Tm 8 Wait for the program to process the backup progress Elapsed Time Tse Processing DATE ST beatbox wn Estimated Processed Files 105 10 Bytes 30 594 169 10 678 471 ompression COT For some circumstances The Personal Server s FTP function 1 00 1 provides the possibility of remote backup For example you have an IP camera provides FTP feature and want to transfer video data of IP camera back to the Personal Server to fulfill the needs of remote monitoring IP Camera Remote Backup FTP To use the FTP please choose a FTP supported Browser ex IE 6 0 Type ftp domain name or IP in Bower s address blank and press Enter The Authentication Windows will appear for you to input username and Password You can find the username password in configuration in the management web page user configuration under the web page Share Please make sure that the privilege to access FTP is enabled To use Personal Server as a FTP server without fixed IP or domain name please setup your
17. Importer LONGSHINE T EUROPE Date 08 07 2005 Note The power consumption of EUT is 4 430W which is less than 75W and no limits apply Therefore it is deemed to comply with En 61000 3 2 2000 without any testing 61LS 02200 207C 53
18. P 39 P2P The device provides you P2P downloading with embedded BitTorrent client To process downloading please refer to the following procedure 1 Geta Torrent File The BitTorrent download is triggered by Torrent files formatted as XXX torrent 2 Locate those Torrent files in a folder within the Personal Server EX Create a folder which named P2P in the device Place those Torrent files in the P2P folder 3 Create a folder in the Personal Server to place the data you are going to download Please note that the folder should be within the folder that contains the Torrent files Ex Create a folder named BT in the P2P folder 4 Start downloading For detail configuration please find the instructions below BitTorrent Configuration BitTorrent Configuration Setting Download Configuration Download Configuration and Status All users of this device are warned against illegal downloading of copyrighted materials The P2P embedded functionality is provided for downloading authorized files only Downloading or distribution of unauthorized materials may result in severe civil and criminal penalty Users of this device are subject to the restrictions of the copyright laws and should accept all the consequences 40 BitTorrent Configuration The configuration of BitTorrent can be setup here fill in the settings in each blank then press apply to activate Please refer to the following instructions to
19. Wizard to activate the setup utility The startup Manu m Please Click Next to continue NetworkHD Configuration and setup Utility Step 0 Welcome page 16 Step2 Connect the power cord and network cable m Connect the connector side of the power cord to the AC socket located on the rear panel m Connect the power cord to an appropriate outlet m Press the power button to activate the Personal Server and confirm that the device is well powered by examining the LEDs on the front panel Power On m Connect the Personal Server and PC Switch with Ethernet RJ 45 cable m Ensure that the LAN LED lights green LAN Connection 17 Step3 Scan network HD in your network m Click Next to proceed the Personal Server scanning MMetworkHD Configuration and Setup Utility Step 3 De Click next to proceed the Personal Server scanning Previous HD scanning please wait 18 NH Select the Device you are going to setup then Click Next The Setup Wizard will take different actions according to the status of the Personal Server Reachable Status The Setup Wizard is going to The PC that runs the Setup Wizard currently 1 Adjust the network settings of the cannot access this Personal Server with the Personal Server to make it to be present network settings accessible by the PC 2 Create two shortcuts to access and setup the Personal Server The PC that runs the Setup Wizard currentl
20. configure 1 Enable BitTorrent Choose Yes to enable the BitTorrent download or choose No to disable 2 Download Folder Choose the folder that contains the folder where you place the Torrent files Note To download successfully please make sure that the torrent files and the folder for restoring downloaded data to be in the same folder Ex if you place those Torrent files in folder share the folder Multimedia for placing downloaded data should be also in the folder share 3 BitTorrent Configuration File You can specify any name for the file The file is for recording the download information which helps to resume interrupted download Note Please don t delete the file after downloading 4 Max Active Torrent Number To set the numbers of Torrent files to be activated at the same time A number within 10 is allowed 5 Scheduler Chick Yes to enable the scheduler The scheduler is provided for users to set up the start end time of BitTorrent functionality Start Set the time to start BitTorrent download upload 7 End Set the time to end BitTorrent download upload Ex you can configure the scheduler to start by Everyday Hour 23 Minute 0 and end by Everyday Hour 6 Minute 0 to process BitTorrent download upload from 11 00PM to 6 00AM Notes Basic Configuration of BitTorrent 1 Configure file is used to record the download data when something happens 2 The max active torrent number is 10
21. d User 1 Click Add button Basic User Advanced User None Note Click Add to add a new user who is allowed to access the Network HD Click Delete to remove the user you select from the list Click the user icon to change the user name password and description 2 Enter the User Name New password Confirm password User description 3 If you want to add a account for a user that use Windows 95 98 or 98se please use their respective username for their operation system as their username for the device 3 Decide the FTP Access and Accessed Level When FTP Access Is enabled those users are allowed to access FTP with their own username and password he owned 35 4 Choose the default folder for the user 5 Click Apply to save Notes If the user can use FTP at the same time don t use username as your password Usernames i 4 o Wee Confirm Password User Description dil Change the User configuration 1 Click the User Name link for example all Usernames at at N 2 Enter the New Password confirm Password and Description to change the setting Delete User Remove the certain user account to ban the right from accessing the Personal Server 1 Fill in check boxes to select users that you want remove 2 Click Delete to remove Basic User IN all ml Advanced User Mone Folder Configuration On the page you can add folders delete folders and setup the authentication of use
22. e over five the system will block other users who want to access Please check the Samba Users FTP Users by clicking the Click here for more information on the Web based Ul 50 6 I can t access the Personal Server with the shortcuts created by Quick Setup Wizard Ans Ol Ol Check answers in Question 5 first You may change the IP Address of the personal server you may create new shortcuts by 1 Key in IP address of Personal Server in URL then copy the shortcut in the URL to your desktop 2 Key in http IP address of Personal Server in URL then copy the shortcut in the URL to your desktop 7 have accessed the HD but I can t get access to the folders Ans O O Verify you have the correct username and password For Windows 95 98 98se users please note that you should add a new user with the username of your operation system Please get access to the management interface Add a new user which use the username the same with your operation system Get access to the HD and double click a folder Fill in the password to get access to the folder If you have accessed to any folder in the HD and would like to use another set of username password for different authority please log off your operation system and log on again 8 There are unrecognizable characters as the file name Ans O If you are using the Samba mechanism ex My Neighborhood or the Access my personal server icon to acc
23. ed to access the Personal Server Only the configured MAC addresses have the right to access the Personal Server 3 Denied Setup the MAC addresses that are denied to access the Personal Server The MAC addresses that are configured are not allowed to access the Personal Server Check if MAC is allowed or disallowed to access through SAMBA and FTP MAC format is X XXIXEIEXIXEKIXE MAC Access Check Denied MAC Address 1 DO BO 7D CD C5 3E MAC Address 2 MAC Address 3 MAC Address 4 MAC Address 5 MAC Address 6 MAC Address 7 MAC Address 8 MAC Address 9 MAC Address 10 5 E E 30 Administration In this page you can manage the Personal Server with the tools to m Restart the system Format the Hard disk Restore the default setting Update the latest Firmware Adjust the system time Support the correct code pages in SAMBA for character set System Restart Reboot Network HO Format Network HO Factory Default Reset Restore Network HO to factory default configuration irmware Upgrade Upgrade Network AD firmware stem Time Adjust the system time haracter Set 3 support the correct code pages In SAMBA for character set Restart System To Restart the Personal Server Click Yes to enact Don t power off the device before the system restart been completed Do you want to restart the system Yes No lt may take several minutes Please walt and ensure a safe operating environment Note When the reb
24. embedded management web pages Access My Personal Server is the Link to access the shared folder in the Personal Server Please follow the statement below as the Personal Server accessing guide To setup the Personal Server please refer to the next page for management guide Note Express Setup Wizard will detect your HD content but only for the 1st Partition ro A My Computer A w Network Neighborhood a Fi Internet Explorer Recycle Bin oN Setup my Personal Server Setup the Personal Server by ee Web based UI with Browser ex I E HS setup My Persona Ld ae 4 LCR M y Personal Access my Personal Server Use the network HD of the Personal Server Icons Created Note If an unformatted or no hard disk is installed users will not be able to access the Personal Server by clicking the Access My Personal Server But you will still be able to manage the Personal Server by clicking Setup my Personal Server 21 To Access this HD Double click the Access my Personal Server icon to access the HD and double click a folder The authentication window pops up Please fill in the user name and password to get access to folders The device provides three default accounts for users to read writes folders in different authority levels era ES a x alm Bact kofward Up Cut Copy Paste Undo Delete Properties lews Enter Network Password 2 x ml Enter
25. ess the HD please use the FTP to view the file Those characters that can be recognized from FTP may not be recognized via Samba and vice versa We recommend users to place those from FTP in the same folder Use English characters can also prevent the problem SI Specification Standard IEEE 802 3 IEEE 802 3u Support Protocol TCP IP HTTP SMB FTP Support concurrently connected Users Samba Five Users FTP Five Users Interface One 10 100Mbps RJ 45 Ethernet port One Default Button Connection speed 10 100Mbps Support Hard Diskette One removable 3 5 external HD ATA Diagnostic LEDs Power On Boot or Shutdown Green Blinking LAN Ethernet Act Link Green HD Hard Disk data transfer Amber Blinking Dimensions 2201 130W60H mm Operating Temperature Operating 0 40 C Storing 10 65 C Power Supply DC 12V 3A External power adapter Certification FCC CISPR_22 CE EN55022 VCCI Class B 52 DECLARATION OF CONFORMITY IN ACCORDANCE WITH THE RADIO AND TELECOMMUNICATIONS TERMINAL EQUIPMENT ACT FTEG AND DIRECTIVE 1999 5 EC R amp TTE DIRECTIVE C European Community Conformity Mark We Manufacturer Importer Longshine Technologie Europe GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare That The Product LCS 8220 Network Hard Disk Is In Conformity With Identification of signatory empowered to bind the manufacturer or his authorized representative Signature Manufacturer
26. g column Select a file in the check box then click Inactive if you want to terminate a download task You can also click on the hyperlink of the torrent file name to check the properties of the task Note Move the cursor over the items to get the c Downloading DL i Rate MAX Rate Un a ee iso torrent 0 00 2172 0 0000 0 0000 128 128 Iso torrent ARO 1 Waiting for downloading File Name Note Click Add to add a new download process Click Inactive to remove the process you select from the list 44 WEB Server Administrator WEB Server The Administration port is the port for accessing the Web based management interface As default the Port 80 is configured as the Administrator WEB Server Port WEB Server The WEB server allows users to construct a Website by HTML format To activate the WEB server click Yes to enable Specify a port number from 1 65535 WEB Folder is the location where you place your HTML files Note 1 As default the Port 80 is not allowed to setup for it has been configured as the port for accessing the Web based management interface 2 We also provide a Website template for you to build up a Website and enjoy the WEB server properties easily To use the template access the CD we provide copy the data in the folder WEB Template Paste those data in the folder that you configured as the WEB Folder Notes Configuration of WEB Server 1 Port n
27. grade the Firmware 1 Click Browse 2 Select the file for Firmware updating 3 Click Apply Caution Don t power off the device or the device will be damaged Please input the file name with full path IN Nc System Time 1 If your system is not connected with Internet Click Time Sync to synchronize the current time with PC 2 If your system is connected with Internet you can use Time Server and select Time Zone to do time synchronization Please remember to click Save The correct time will be applied by next boot O Use Local Time Clicking Time sync will restart the network daemon such as SAMBA and FTP Y Use Time Server 33 Character Set Unicode is working for the device to recognize most fonts around the world thus prevents errors from fonts difference To install Unicode insert the utility CD we provide click the Browse icon click on your CD ROM drive open the folder Unicode and select the file ntx_chset h click open to browse the file then click Save to enable Note Please don t delete or do any modification on the file Character Set File DUnicode nt _chseth Browse 34 Share On Share page you can manage the Users and Folders on the Personal Server User Configuration Metwork HO User Setting Folder Configuration Metwork HO Folder Setting User configuration On this page you can add remove users or configure the user properties Ad
28. nomical and powerful NAS Network Attached Storage especially suitable for your small business SOHO Small Office or Home Office or personal requirement and it s highly integrated to work as your Web Server FTP server In addition to those fascinating storage and sharing features the embedded BitTorrent client also brings you a terrific performance on downloading your favorite Multimedia Smart Wizard Not acquainted with Hi tech stuff Got exhausted to deal with those annoying settings Take a try on Personal Server The three powerful auto installation features HD Auto detection Pre defined User Accounts and Auto Networking Setting make the procedure to install and use the Personal Server a piece of cake All you have to do is connect your HD to LAN and turn it on Now you ve been ready to enjoy the time with the Personal Server with our setup Wizard Key Features Provides one 10 100Mbps Ethernet port Auto MDI MDIX supported for network connection WEB based User Interface Ul for easy configuration Supports ATA ATAPI 6 HD Supports all 3 5 IDE HD up to 250GB with EXT3 file format Built in FTP server for FTP client to transfer files conveniently Built in BitTorrent Client for users to download files Built in Web server which supports one website construction Provide website templates for easy website build up Support Unicode to be compatible with fonts of different language Support Hard Disk replaceable feature
29. oot is completed it will return to the Home page 31 Format HD When this massage HD Unable to use is found in HD used it represents that your Hard disk is one whole new unformatted Hard disk or your HD is not formed as EXT3 format You will have to format the HD or replace a HD with EXT3 format Caution All partitions on your HD will be format and all your DATA will be erased Status Host Name feoir O O OOOO Uptime m o Version w1 00 10 08 2004 ext3 Samba Users 0S FTP Users E To format the Hard disk click Yes to activate Administration HD Format Do you want to format HD Yes No It supports only EATS and may take several minutes Please walt and ensure a safe operating environment Note When the HO format is completed it will return to the Home page Please wait as the format proceeding Do not power off the system or close the browser After the completion of the format process the system restarts automatically 32 Factory Default To restore Personal Server to default configuration click Yes to enact Don t power off the device during the process Do you want to reset to factory default Yes No t may take several minutes Current configuration will be lost Please wait and ensure a safe operating environment Mote When the reset is completed tt will return to the Home page Firmware update To up
30. part of this document can be copied or reproduced in any form without written consent from the company Trademarks All trade names and trademarks are the properties of their respective companies Copyright O 2005 All Rights Reserved TABLE OF CONTENT INTRODUCTION iii S 3 KOY FONUS 2 3 UNPACKING INFORMATION oc 4 HARDWARE GUIDE rrinte eeens een ra EEO E EEOSE Aane 5 A ee E awe T 5 POWER 5 LEDS DOMO a a aa eo aa 5 REIF INO o eE RE E E Re 5 IP PROTOCOL SE DUP enmia 2er 6 HARD DISK INSTALLATION zes 002 en ee ein 13 QUICK SETUP WIZARD EEE ER RE RR cedar as 15 MANAGEMENT GUIDE u en ann ren 23 SETUP THE PERSONAL SERVER unse eat 23 HOMERO rrollo 24 HONO Saueotete tosis aceon wh vase N 25 NETWORKING ne een elektr 27 FOSFAAT O E A is 21 Paa ERE A E E oa 28 SUDSLUSER RASWO Doria 28 PFOP a A EEE RR BRUEEREEESENRTARRGE BE ERIEEHRSLHREREENARRR 29 MAGIE ee este 30 ADMINISTRATION u na ae ee ee 31 Po S 31 ENANOS 32 FACON DOM cda 33 FWA CUPO I E iiie E E N can 33 AAA ee ae seat 33 PEIE Eo ee ee ee 34 SHARE zu O ET 35 USER COM MOU ANON om A o 35 Folder GORNGUTAHON ne A A A CE 37 A ee ee ee ee 39 FP CONG UN aU krann ans aida 39 o o II eae 40 BIEIOMENELLONNGUFAlON nee sn 41 Downoad COMMOULAUON een A 42 WEB SERVER o 45 APPLICATION su run 47 TROUBLE SHOOTING GUIDE usa alu ill SPECIFICATION Introduction Powerful and Easy Easily fit your data sharing and storage demand this Personal Server features with compact eco
31. rs Add Folder To add a new Folder for file sharing 1 Click Add to add a new Folder Note Click Add to add a new folder Click Delete to remove the folder you select from the list Click the folder icon to change the folder name description and user authority 2 Enter the Folder Name and Description 3 Click Apply to Save u A BEE z A Folder Description Video File Delete Folder To remove a folder and the files within the folder 1 Select the folder you want to remove by clicking the check box 2 Click Delete to remove nn TO 37 Change the User Authentication of folder In this management page you can configure the privilege levels for each user ex reading or rewriting files and folders in Personal Server Three privilege modes are provided for each user m Non access The User is not allowed to access the folder m Read only The user is allowed to read files only in this folder m Read amp write The User is allowed to read and write files to or from this folder You can also do an overall authority configuration for all users toward the folder We provide 4 authority levels m Authentication Free Access m No Access for all users E Only Read access for all users m Read Write access for all users Share Folder Share limits of authority Folder Name Share Share to All Change Descriptian Please set user s limit for this folder Y Open Mode Y Wo access for all users
32. rs to add a Firewall device to secure your network from being invading 46 Application There are several applications for the Personal Server For one user or one single PC you can backup your important files from your PC i n Backup Data One User For Multiple users The Personal Server provides a convenient way for file sharing and backup by using My Neighborhood All you have to do is connecting the Personal Server with your switch and you can enjoy the easy and reliable service of Personal Server Files Sharing Remote Backup PC PC N Backup For Windows 2000 XP Users the OS provide an accessory system tool for data backup Backup Please follow the steps as the reference to complete data backup 1 Activate the programs clicking start button see wer Teo tes pointing Programs pointing Accessory SS Ten pointing system tools and clicking Backup e 1 E 2 Click Schedule Jobs tab and Select date L L L that you want to activate the Backup Job o gt a I Click Add Job button a E gt gt gt 3 When The Wizard appears Select Create a 2 L Jn a u new Job and Click OK Add Job 47 4 Select Back up My Computer to backup your whole system or Back up Selected files folders and Driver
33. te that if the Unicode been loaded successfully or there may be some language errors on file name or folder name when accessing to the Personal Server For instructions of Unicode installation please refer to Character Set under Administration category Host Name Dive Samba Users 0 FTP Users 0 26 Networking The Networking management provides users to do the setup of Host Name IP Address SuperUser Password and the IP MAC filtering function After setting the Personal Server will be shown on My Neighborhood Host Name Setting S o IP Address Setting S SuperuseriPassword Setting S IP Filter MAC Filter Host Name Configuration Host Name Identification of the Personal Server shown on your My Neighborhood Work Group The workgroup this Personal Server is located Description Brief description of the Personal Server EX IP address Location etc Notes 1 Host Hame amp Work group are limited to 15 characters Discription is limited to 48 characters 2 Space character control character and are not allowed Work Group Wark r Description a a 27 IP address Item Configuration Please provide IP Address Subnet Mask and Gateway Subnet Mask ss S DNS Server EA UT SuperUser Password You can setup the administration User Account Password in this page The user name password is used to access the Web based Ul to Setup the Personal Server Item Configuration
34. ts of a connection right click its icon and then click Properties To identify your computer on the network click Network Identification To add additional networking components click Add Network Components Select an item to view its description 3 object s A 2 Choose local area Connection and click Properties Local Area Connection Status Ki x General Connection Status Connected Duration 00 02 50 100 0 Mbps Packets Properties Disable 3 Click on Internet protocol TCP IP then click properties 2x General Connect using BY SURECOM EP 320 lt S 100 10M Ethernet PCI Adapter Components checked are used by this connection Mm Client for Microsoft Networks a File and Printer Sharing for Microsoft Networks Y NetBEUI Protocol Y Internet Protocol TCP IP Install Uninstall Properties Description Allows your computer to access resources on a Microsoft network Show icon in taskbar when connected 5 Select use the following IP address State the subnet mask to be 255 255 255 0 Click OK and OK then restart your computer Internet Protocol TCP IP Properties General ou can get IF settings assigned automatically if pour network supports this capability Othenvise You need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically IF address 192 168 1 2 Subnet mask 25
35. umber must be between 1 and 65535 2 WEB folder is the location of all your HTML files WEB server will start from index html if it exists Administrator WEB Server Administration Port 80 WEB Server 45 To access the Web Server The address for linking the WEB server is the IP address of the personal server with the port number added after by a colon Ex Use 192 168 1 1 8080 when the IP address of the personal server is 192 168 1 1 and the port number of the web server is configured as 8080 3 For WAN users to get access to the FTP or WEB server you should link the personal server to a router with appropriate configuration Please make sure that 1 The NAT functionality is enabled in your router 2 In the port mapping session the Internal Host IP should be configured as the IP address of this Personal Server and the value of Port should be correspond to the port number of the WEB server or FTP server you configured Ex If the IP address of your personal server is 10 10 7 251 the port number of your FTP is z configured as 21 and the port for Web Server is as 8888 you should add or modify a port i E mapping record set the Internal Host IP address as 10 10 7 251 the Port as 21 then add or i modify another port mapping record set the Internal Host IP address as 10 10 7 251 and the z Port as 8888 l 3 Before allowing the device to communicate with Internet we strongly recommend use
36. y Create two shortcuts to access and can access this Personal Server with the setup the Personal Server present network settings NetworkHD Configuration and amp setup Utility Select Netw ork HD to configure No Reachable IP Address HD Capacity HD Availak 0 Yes PM_Sharing 10 10 4 20 HDS722512VLAT20 123566 120 576B 1 Yes NH 210 10 10 10 252 WDC WD800JB 00F MAD 80GB 76 9268 oe hie ees ERE QUANTUM FIRESALLIct10 10 3 Yes h999 10 10 14 144 IBM DJNA 370910 9 16B 8 4GB 4 Yes Drive 10 10 13 209 QUANTUM FIREBALL CX13 0A 13GB 12 516B 5 Yes Drive 10 10 13 238 Maxtor 6Y120P0 122 966 118 186B gt Please select the Network HD you want to configure and click Mext to continue Version v2 2 2004 11 11 Exit HD Found NetworkHD Configuration and Setup Utility Conti User Name fadmin Password fadmin Note Please read the manual for instruction The factory default Username and Password tor management are admin in lower case 25 User name Password Reminder 19 Network HD Confievration and Setup Utility Step 4 Setting Please note that how the two shortcuts function Please refer to next page for further introduction Click OK to setup your Personal Server by Web based Ul or Click Cancel to Continue 20 After the auto installation there should be two shortcuts created on your desktop Setup My Personal Server is created for users to access the
37. your network password for Microsoft Networking zm Haze Cancel User name E Password Fo m All Read Write The account is allowed to Read Write all the folders in Personal server mM Power Read Write The account is allowed to Read Write the share Folder only NW Guest Read Only The account is allowed to Read the share Folder only Note 1 As default the Share folder is created automatically in the Personal Server and can be accessed by any user 2 Users that would like to use another set of username password after getting access to any folder please log off your operation system and log on again 3 For Windows 95 98 98se users please note that you should add a new user with the username of your operation system To configure each account including adding new users changing user name password or other properties please refer to the chapter Share in Management Guide 22 Management Guide Setup the Personal Server To configure the Personal Server via your computer with a web browser installed Please follow up the steps below Double click the Setup my Personal Server icon on your desktop screen The Username and Password Required window appears Enter admin in the User Name location default value Enter admin in the Password location default value Click OK button Enter Network Password ix m Please type pour user name and password Site 132 1
Download Pdf Manuals
Related Search