Technical specifications Camera Monitor
Contents
1. VisionNOVA omslag 04 07 06 15 11 Side 1 Camera Monitor Technical specifications Camera Monitor Frequency 2 4 GHz Frequency 2 4 GHz Channel 4 selectable channels Channel 4 selectable channels Modulation FM Receiver sensitivity 80dBm Antenna Built in omni directional antenna Antenna Built in omni directional antenna Image sensor 1 3 CMOS color image sensor Power consumption max 5 Watts Output power max 10 mW CE Power supply 100 240VAC to 5VDC 1A Power consumption max 1 8 Watts or 3 6V 1400mAh LI ION recharge Power supply optional 230VAC to 7 5VDC 300mA able battery or 3 x AA Battery Dimension 140mm x 115mm x 45mm Operational range Up to 100 meters Weight 245g open air situation Dimension 75mm x 45mm x105mm Weight 135g Congratulations We thank you for choosing VisionNOVA Video Babycall and we know you ll be pleased with your choice Please read this manual carefully and keep it for future reference The box includes e One camera e One monitor with an LI ION battery installed e One AV audio video cable e Two power adapters 7 5V DC for the camera and 5V DC for the monitor e This user manual Camera Legend A1 A2 A3 A4 A5 A6 Lens Lens knob Lens body rotates up to 120 degrees vertically 6 IR LEDs provide infrared light for night vision Microphone LED indicator for low battery power Monitor Legend B1 B2 B3 B4 B5 B6 Flip dow2. a dry place Precipitation humidity and liquids may contain minerals that corrode electronic circuits e Avoid storing in a hot room High temperatures may damage the contact between the electronic components and the monitor screen shorten the life of electronic equipment and warp or melt some plastics e Avoid storing in a cold place When the units then warm up to their normal working temperature condensation may form inside which may damage the electronic components e Bear in mind that public radio frequencies are being used when the units are functioning and that the sound and the pictures may be picked up by other equipment on the 2 4 GHz band Conversations even from a room close to the camera may be captured by others Always turn off the camera when not in use in order to protect your private life Guarantee The guarantee lapses if the units have been opened Unskilled handling may damage the equipment Any repairs must only be carried out at an ESD secure workstation to avoid damage from static electricity The guarantee does not include the battery because its life soan depends on use If you wish to lodge a complaint against the product a copy of the receipt must be attached together with a detailed description of the defect If you supply a complete description of the defect you are ensured the best service and you will be just as happy with your NOVA quality product like thousands of others in Europe
3. B14 Move the ON OFF switch B13 to the ON position Adjust the volume B9 to the desired level Adjust the brightness B10 to the desired level Channel selection Only one switch B11 must be moved to the ON position Select Channel 1 by moving CH SEL 1 to ON Select Channel 2 by moving CH SEL 2 to ON Select Channel 3 by moving CH SEL 3 to ON Select Channel 4 by moving CH SEL 4 to ON Check that you select the same channel as on your camera Voice activated function Alarm mode Close the monitor B1 Press the alarm button B3 to select Alarm mode for the monitor and the LED indicator for alarm B4 lights up By pressing the alarm button B3 once more the alarm LED indicator B4 will be turned off and the monitor returns to normal mode When the camera is activated by a sound from the baby you are alerted by a beeping sound in the monitor and the alarm LED indicator B4 blinks until the button B3 is pressed again With NOVA s alarm function you can flip down the monitor B1 so that only the sound is trans ferred from the camera If there is strong ambient noise you can turn the volume off completely B9 and the alarm function will alert you when there is a sound in the child s room without having to watch the monitor You also conserve battery power Low battery power indicator A beeping sound and the low battery power LED indicator B7 will tell you that the battery is getting low Replacing
4. batteries from the camera if you are not planning to use it for a period of time Channel selection Always select the same channel A10 for the camera and the monitor Fine tuning Place the camera in a suitable location and point the lens A1 toward the observation area by rotating the lens body A3 vertically Adjust the focus by turning the lens knob A2 until the image is sharp Night vision The camera has six infrared LEDs A4 that give you clear images in the dark To activate the infrared function move the switch A11 to the IR position When using the night vision function the picture automatically goes into black and white mode The night vision function is disabled when running on battery power Low battery power indicator The LED indicator for low battery power A6 lights up when the batteries need to be replaced Monitor Connections Power supply The monitor can run on the power adapter and the pre installed LI ION rechargeable battery Charging time is 1 to 4 hours whether the monitor is off or on When the monitor is turned off and the charging is completed the indicator for fully charged battery B6 lights up The bat tery will work approximately 6 hours with the monitor flipped down and 2 to 3 hours with the monitor open Using the power adapter Plug the power adapter labelled OUTPUT 5V DC into a wall socket and plug the adapter plug into the rear of the monitor
5. hat the channel switches on the camera and the monitor are set to the same channel e If a wireless computer network is in operation near you switch to another channel or turn off the network if necessary Alternatively set the network to channel 1 and VisionNOVA to channel 3 e If a microwave oven is used between the camera and the monitor move the microwave oven or turn it off e Check that the camera and the monitor are within range of each other The range is up to 100 metres open air This depends on local conditions The range is significantly reduced inside because walls roofs large objects and glass limit the range The picture quality will give you a good indication of reception conditions e Weak batteries will cause interference and reduce the range substantially e In the 2 4GHz frequency band many types of radio traffic are permitted Normally this may cause obtrusive interference With NOVA s unique alarm function you avoid the noise and poor image quality but you will still be alerted when your child wakes up Maintenance e Store all parts and accessories out of reach of children e Only use the supplied power adapters for the respective unit e Do not shake or knock the units e Do not use in dirty or dusty environments e Fingerprints or dirt on the lens surface may detrimentally affect the camera performance Do not touch the lens e f the lens is dirty use a lens brush or a soft dry cloth to clean e Keep in
6. n 2 5 TFT LCD dis play Speaker Alarm ON OFF button LED indicator for alarm LED indicator for charging LED indicator for fully charged battery A7 Mounting holes for fixing to wall etc centre to centre distance 33 mm A8 Battery compartment AQ 7 5V power adapter plug A10 Switch for channel selection A11 ON OFF switch and night vision switch B7 LED indicator for low battery power B8 Jack for audio video output B9 Volume controller B10 Brightness controller B11 Channel selector B12 Reserve B13 Power ON OFF switch B14 5V power adapter plug L CH SW 43 21 Camera Connections Power supply The camera can be used with a power adapter or three batteries type AA alkaline On battery power the camera will normally work up to 11 hours Using the power adapter Plug the power adapter labelled OUTPUT 7 5V DC into a wall outlet and plug the adap ter plug into the underside of the camera A9 Put the ON OFF switch A11 in ON position Using batteries Open the cover of the battery compartment A8 on the rear of the camera Insert three AA batteries so their plus and minus ends are facing as shown on the inside of the battery compartment cover and close the battery compartment securely Move the ON OFF switch A11 to the ON position Discard used batteries in an environmentally friendly and responsible way Never mix old and new batteries Remove the
7. the LI ION battery Open the cover of the battery compartment on the underside of the monitor The battery is pre installed at the factory and must not be removed before it is dead The battery is connected to a small plug Press down the contact see the shaded field and pull up the plug using the two cables Discard used batteries in an environmentally friendly and responsible way The NOVA battery has sophisticated electronic components that prevent the battery from exploding Only the battery provided or an original NOVA battery must be used Other applications Connecting to other equipment The monitor is furnished with an audio video output jack B8 for connecting to a TV VCR DVD or PC Put in the mini jack plug of the provided AV cable into the AV OUT jack B8 of the monitor Plug the other end of the AV cable into the audio video input of the equipment to be used See also the user manual for the equipment to be used You can also use this equipment for another type of monitoring in your house and home Troubleshooting If you do not receive any signal at all e Check that both the camera and the monitor are switched on e Check that power cables are firmly plugged in e Check that the camera and monitor are tuned to the same channel e If the camera and or the monitor are running on batteries replace the batteries or use the power adapter If the signal is poor or there is interference e Check t
Download Pdf Manuals
Related Search