SOLAR CONTROLLER solar12(non waterproof)
Contents
1. SOLAR CONTROLLER CMP12 24 non waterproof User s manual SOLAR CMP12 24 cfoxes Charge Load Battery ba SP The product can automatically manage the work of Solar Panel and battery in Solar System which is below 144W 12V or below 240W 24V Max solar panel 12A Auto switch between 12v 24v 144W 288W I FUNCTION 1 N O oO A W Over load protection Short circuit protection Reverse discharging protection Reverse polarity protection Protection from the lightning strike Under voltage protection Over charging protection CONNECTION AS INDICATED IN DIAGRAM Open the top cover of controller connect the wire and terminals of controller according to the drawing on the top cover of controller 1 Connect the Poles of the battery to the correct ports of controller the third and the fourth one from left If load indicator mark load flickers once and starts lighting after 30 seconds you can tell the connection is correct the following operation can be proceed otherwise the following operation may damage the controller 2 Connect the Poles of the solar panel to the correct ports of controller the first and the second one from left Incorrect connection may damage 3 Connect the Poles of the load to the correct ports of controller the fifth and the sixth one from left lll INDICATOR LED 1 The battery is being ch2. arged strongly when the Charge LED is lighting flickering means the battery is in floating charge mode if it s off means charging stopped 2 When the Load LED is lighting it means there is output and load can work if it s off there isn t output and the load cannot work Notice 1 Please make sure the rated voltage of solar panels batteries the loads are same and are all 12V or all 24V 2 The rated current of solar panels and load must be less than the rated current of controller The Specifications Error of 2 Rated voltage 12V or 24V Voltage of stop power supply 10 8V or 21 6V Rated charging 10A Voltage of resume power supply 12 6V or current 25 2V Rated load 10A Voltage of stop charging 14 0V or current 28 0V Working 20 60 C Temperature coefficient of voltage 3mV C cell temperature stop charge Dimension L W H 101x95x35 mm Net weight 140g Parameters may customized by customers I V METHOD TO SET SWITCH OFF THE LIGHT
Download Pdf Manuals
Related Search