User manual - Savebase.com
Contents
1. D NETDVR et On this setting interface you can set the corresponding parameters of the host side The setting parameters match with the host side For the setting methods and notes please refer to the host side manual recording date and time HDD management alarm clear log search software update and restore default operation instruction Recording and screenshot directory storage Set the storage path of the recording and screenshot 23 HD All in one DVR User Manual 4 7 Remote Playback RemotePlayBack Channel 1 StartTime 2009 10 27 00 00 00 VideoType al EndTime 2009 10 27 09 08 37 Index StartTime i TI ya PeO m o o Choosing video playback channel number recording type time condition and clicking the search button a list of search results will appear on the left box You can turn up and down page or input the page number and jump to view the video files one page displays 20 file messages and maximum supports 4000 messages File Playback Selecting the target file in the search list box double clicking the file or clicking the File Playback button the playback window on the right will play the target file Playback control matches with the host side amp Time Playback Clicking the Time Playback button the Playback window will start playing the video file which has been set the start time amp File Download Selecting the target file in the search list box a2. Pause Play Click u to pause playback click to go on playback 9 eee e e e HD All in one DVR User Manual Single frame Playback Under the pause mode click can start single frame play click once will play one frame forwards Slow Forward Click to start slow forward click it again to set the slow forward multiple Fast Forward Click to start fast forward click it again to set the fast forward multiple Last Section Next Section Click or o each click last section or next section the video will forward or backward 10 Turn off on Sound Click or SI to turn off or turn on the sound of the playback file Playback Status Information The right side of the toolbar will respectively show the play speed play progress playing time and total time of the video file Exit Playing Clicking ESC or can exit the playback screen at any time when finishing playing all the video files it will return to the playback screen automatically 3 6 Manual Recording Single click Manual Recording in the main menu bar to enter the setting interface Press the REC button or click Manual Recording inthe main menu bar by mouse can enter the manual recording setting interface Manual recording operation interface consists of the following parts t t 2010 01 25 19 14 20 Channel 1 2 State st BERR EEE Bf Channel 9 10 11 12 KK 14 15 16 State st NENE EEE E Start All Stop All Back Channel Num
3. operation interface click ADD button and enter the add user interface Note For the input methods please refer to 3 3 2 4 edit box 1 Input New User Name Input a new user name in the user name edit box such as user Note For the input methods please refer to 3 3 2 4 edit box 2 Setup Password of New User Choose the Setup Password button in the Add User interface and input the new password on the password setup page The password is within 6 digits 3 Setup the Authority of the New User Setup the operation authority for the new user on the Add User interface and then make selection in the checkbox with corresponding functions V means that the user can use ti i this authority u means that the user cannot use this authority 11 HD All in one DVR User Manual 4 Save the Setup Information of the New User Single clicking the OK button the setup information of the new user will be saved while clicking the Cancel button the setup information of the new user will not be saved Modify User Enter the User Management operation interface single click the right mouse button or press ENTER on the panel in the user list to select the target user then single click the Modify button enter the Modify User page to modify the user information Note Admin administrator can modify the authority of other users Delete User Enter the User Management operation interface sing
4. channel 2 could set to D1 otherwise LCD DVR is 4 channel type only channel 1 could be set Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking the Copy to button the setting information of the current channel will be applied to other target video channels by the system When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 3 Video Choose Video on the system setting interface to enter its setting interface t t de Select Channel Select the target channel to be set and click the select box to select Channel Name In the edit box the user is free to edit the channel name For the edit method please refer to 3 3 2 4 edit box Show Name V means show u means not show Click Position button and enter the setting interface Setting can be realized by the direction buttons on the panel or by mouse dragging the red channel When the setting is complete press the ENTER button or click right mouse button to save and exit Clicking the ESC button will exit without saving Show Time V means show u means not show Click position button and enter the setting interface Setting can be realized by the direction buttons on the panel or by mouse dragging the red channel When the setting is complete
5. operation instruction 4 6 3 Alarm parameter Configuration Settings ServerParam ChannelParam AlarmParam UserlnfoParar Others Alarm Param Info Alarm input larmin ID 1 X Alarminput m Video Lost Set PT ZLinkage LinkageID Gi PreSetPoint jE CruiseHum Ju Alarm output AlarmOut ID 1 v larmType Normal Close v E Mail On this setting interface you can set the corresponding parameters of the host side The setting parameters match with the host side For the setting methods and notes please refer to the host side alarm input and alarm output operation instruction 22 HD All in one DVR User Manual 4 6 4 User Configuration Information Settings ServerParam ChannelParam AlarmParam UserlnfoParam Others Userlnfo User ID 1 v UserName Password eok Confirm pa For the user information of the setting device the setting parameters match with the host side For the setting methods and notes please refer to the host side user management operation instruction 4 6 5 Others Settings ServerParam ChannelParam AlarmParam UserlnfoParam Others Other Config Manual Recorder Bi m m mu mu mu mu mu Be Mio ml mile mis mu gob HG SystemTime 2009 10 27 09 07 24 M AllStart Iv AllStop Set Refresh Set Hddinfomation Capacity MB Free MB ClearAlarm LogOuery ReBoot Update Restore lt gt Client Record and Snapshot File Saving Directory
6. time the activex cannot be loaded the IE must be set as follows ToolsInternet OptionsSecurity Internet gt Custom Level gt Enable all the activexs and plugins Click OK finally Login Open IE and input the IP address of the host network setting in the address bar the factory IP address is http 192 168 1 114 then enter the login page Input the user name and login password If the user name and password match with the ones of the host side and the input user information is correct then the login will be successful Soave admin Password If plugin cannt be installed automatically pls downloadmanual installation package 4 1 The Main Page of the Video Monitoring After login the main page of the monitoring consists of preview window PTZ control preview mode bit stream selection channel open talkback open configuration and playback 4 ZA SK O IRIS Focus Zoom X Ei Main Stream vl Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel10 Channel11 Channel12 Channel13 Channel14 Channel15 Channel16 be HD All in one DVR User Manual Open Preview Click left mouse button to select the target channel in the preview window red channel box means selected Double clicking the channel number by mouse in the channel open box can open or close the video image of the corresponding preview window Channel 1 means open Channe
7. Email Input E mail on the right of the alarm mail When local alarm occurs it will send a prompt message to the corresponding E mail Password E mail password SMTP Server enter the E mail SMTP server When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 6 Schedule Choose Schedule on the system setting interface to enter its setting interface t t t Channel Select the target channel to be set up and click the select box to select Week Select the date to be set up You can set up respectively All means all the dates Recording Type and Time Bucket Within the four time buckets each time bucket can set up different recording types timing recording red motion detection recording green alarm recording yellow V means enable a means invalid There is time bucket status indicated at the bottom It is a whole plan of 0 to 24 hour Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking the Copyto button the setting information of the current channel will be applied to other target video channels by the system When the page setting is complete single clicking the OK button the setting information will be 15 HD All in one DVR User Manual saved and it exits single clicking the Canc
8. HD All in one DVR User manual HD All in one DIEM VDRO Recordar HD All in one DVR User Manual Table of Contents I Product TVG OCU LION NM vr o o er e 2 1 1 Product SUNIMIAIY cascesesisceevecascessecsestadsors dvesestsunetesaiceedecstdrstecsssndaers ata daje 2 1 2 e a o o a a e a a a e e ni eieiei 2 2 Product Outside Structure Introduction aeava vana 4 2 1 The Panel Instruction esa sava ona sasa danda soda o dada daa dna 4 2 2 The Connect Ports Instruction esssessseseesesesescseseseseseseseseseseseseseseseseseseseseneneseaees 4 2 3 Remote Controller Instruction 0 ssessssseseseseseeseseseseseseseseseseseseseseseseseseseseseseseaees 5 2 4 Video format eecesesesssessssssssesesesesssssssscscsesesesesessssscsesesesesesesssesssssseseseseseseseenseessecseseseaeesess 6 Bx CST A MIST CUION ea E je Coa AGA pe mereneenem 7 3 1 Turn ON OFF DVR RA 7 3 2 Preview and turn on off LCD panel uu eceesesesssesesesesesesesescscsesesesesesesesescseseaees 7 3 3 Basic Menu Operation InstructiOn ovna kakaa 7 3 4 Main Menu Introduction esssssssssessseseseseseseseseseseseseseseseseseseseseseseseseseseseseseseseseseaees 8 3 WCCO PNA OAC Pm meramera mem 9 3 6 Manual Recording nana 10 24 FIZ CONTO assassin oh ah osa 11 SEa ai a EEE di a a e i dai 11 3 9 Log Information gcse sestaceesesbacteseebaceeseebsciesesbsciesestsciesestsciesestsclesesrsebesestscieseeteclaeetcledeeds 18 3 10 Shutdown System aaa aaa aaa na
9. Single click PTZ button to enter the PTZ link interface Choose the channel number and conduct related settings of PTZ link preset point cruise track For the setting methods please refer to 3 8 2 8 Duration When the alarm input is complete set up the Duration time needed for dealing with each point Buzzer If buzzer alarm is needed V means enable u means invalid Rec CH You need to trigger the designated recording channel number when you are setting up the alarm input Alarm Output You need to trigger the designated alarm output channel number when you are setting up the alarm input Mail Alarm If mail alarm is needed V means display o means not display Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking the Copy to button the setting information of the current channel will be applied to other target video channels by the system When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 5 Alarm Output Choose the Alarm Output on the system setting interface to enter its setting interface t t t t t Alarm out Select the target channel to be set up and click the select box to select Type Normal Close Type and Normal Open Type Choose the corresponding type
10. ber Correspond with the video channel of the device Channel State Indicates the recording status of the corresponding channel When the status led is green 9 it means unopened video the status led is red amp it means open video when there is a coil around the status led PB means the corresponding channel opening the network video transmission When the system is under the status of recording regardless of recording type will appear at the bottom left corner of the channel preview screen which means the system is recording Start All Stop All Single click this button to stop or start the video setting of all the channels Back Button Single click the back button to exit manual recording interface and return back to the main menu bar Note If the recording is enabled manually you can only stop it manually otherwise the recording will continue all the time 10 HD All in one DVR User Manual Attention Manual recording operation requires that the user has the recording operation authority Before the operation please confirm with the administrator that the hard disk has been installed in the DVR and it has been formatted correctly 3 7 PTZ Control Single click PTZ Control in the main menu bar to enter the setting interface The main operations of the PTZ control are direction control horizontal scanning ZOOM control focal adjustment aperture adjustment and PTZ speed After switching the pa
11. button the setting information of the current channel will be applied to other target video channels by the system When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 17 HD All in one DVR User Manual 3 9 Log Information Choose Log Search on the main menu page to enter its operation interface Type Select the target log type in the select box amp Time Setting Input the time bucket of viewing in the edit box Single click Log Search the corresponding log information will appear in the log list at the bottom You can turn page by inputting target page number in the page number box or by single clicking OK button 3 10 Shutdown System Choose Shutdown on the main menu interface to enter its operating system Choose the corresponding operation contents in the select box Log out It is used to cancel the current user After log out if you want to continue to use the device you need to login the system again amp Restart Restart the device After confirmation the device will be restarted Shutdown Shutdown the device After confirmation the device will be shut down 18 HD All in one DVR User Manual 4 Client Operation Instruction When you use the client on PC please conduct the following settings IE Setting If it is used for the first
12. e DVR there are two ways a Please press the Power key 5 Sec DVR will power off and the POW indicator led in the front panel will off Press the Power key 5 sec again DVR will power on and the POW indicator led in the front panel will on again b Turn on off the Power switch in the back panel of the DVR But directly Turn on off Power switch when DVR working may lead to loss of system data and the result of a damaged disk so we recommend use the Shutdown button in the menu or the Power key to shutdown DVR system before turn off the Power switch 3 2 Preview and turn on off LCD panel 3 2 1 Preview The device will enter the preview screen when it starts normally The date time and channel name of the system will be indicated on the preview screen Pressing the code corresponding button on the panel or clicking the left mouse button can start single screen preview Pressing the MULTI button on the panel again or clicking the left mouse button can return to the state of multi screen preview 3 2 2 Turn on off LCD panel After device starts normally Pressing SCREEN key on the front panel will turn on off the LCD panel 3 3 Basic Menu Operation Instruction 3 3 1 Enter the Menu Mode Click right button of the mouse or press the MENU button on device panel Screen will show a User Login dialog you could enter you User Name and Password to login the DVR now you click mouse right button again it will s
13. e you need to relogin the system Auto Switch Switch time means the cycle time indicated on the single channel preview Video Standard The device supports PAL and NTSC video output The default video output is NTSC VGA Resolution Adjust the VGA video output resolution There are 800 600 60Hz 1024 768 60Hz and 1280 1024 60Hz options Menu Transparency When the user enters the menu operation interface you can realize the transparency between the screen preview and menu by adjusting the level of the menu transparency Language 11 kinds of commonly used languages including Simplified Chinese English etc According to the user s needs any menu language type can be setup language pack is needed Show Status Setup if the information icons of the recording mode state and motion detection will be indicated on the screen preview When the mark is changed into v it means state displayed when the sign is changed into o it means state not displayed The explanations for the lower left corner icons on the channel screen preview 9 The system is recording regardless of recording type do Timing recording state A Manual recording state R Motion detection state When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 2 Record Choose Record on th
14. e system setting interface to enter its setting interface t t t Channel Select the target channel to be set click select box to select Bit Stream Select the bit stream to be set There are Main Bit Stream and sub bit stream Bit Stream Type Choose the video bit stream type Video Stream means that when the system is recording it only encodes the video Compound Stream means that when the system is recording it encodes both the video and audio CBR VBR Bit rate type User can set up Fixed Bit Rate and Variable Bit Rate Fixed Bit Rate means that the system will encode the image according to the bit rate and video frame rate which are set by the user Variable Bit Rate means the system encodes according to the image quality and video frame rate which are set by the user but the bit rate is adjusted automatically by the system according to the video scene Bit rate set this channel record bit rate 64Kbps to 2Mbps Video Frame Rate The user selects the video frame rate to be encoded The higher frame rate the better image fluency but also occupies the more hard disk space Quality when VBR is selected in CBR VBR option this option will be show The user selects the bit rate of the code as needed The higher bit rate the better image effect but occupies the more hard disk space Resolution this option default value is CIF if the LCD DVR is 8 channel type channel 1 and 13 HD All in one DVR User Manual
15. e will be the menu page of management tools system setting log search shut down system HD All in one DVR User Manual 3 5 Video Playback Single click the Video Playback in the main menu bar to enter the file search operation interface 3 5 1 File Search Select Channel Select the target channel to be searched and click the checkbox to select Recording Type Select the recording type to be searched y means selected O means unselected Time Bucket Setup Input the start and stop times of the video to be searched in the edit box Storage Device Select the target backup storage device in the select box File Search Button When the settings of the above search conditions are complete clicking this button the system will start searching the corresponding video information and entering the search result interface Note If the quantity of the video files which meet the search conditions is bigger than 4000 the system will only indicate the latest 4000 video files If you want to search for the updated files please modify the search conditions Playback by Time Start playing back the video according to the set start and stop times regardless of recording type For the playback tool control please refer to 3 5 3 Backup Backup all the videos which are within the set start and stop times to the designated storage device 3 5 2 Search Result When the setting of the search conditions is complete sing
16. el button it will exit without saving the setting information 3 8 2 7 Network Setup Choose Network on the system setting interface to enter its setting interface There are Ethernet Configuration PPPOE Configuration DDNS configuration 1 LAN Choose LAN on the network configuration interface to enter its setting interface MAC Indicate the physical address number of the device DHCP Choose whether to enable DHCP to obtain IP automatically IP address The IP address must be exclusive which can not be conflict with any other host or workstation during the same network segment Net Mask It is used to divide subnet segment Gateway Realizes the communications between different network segments Gateway address needs to be set DNS When the device is connected to the network using PPPoE protocol it will gain a dynamic IP address Port Number The default port number is 8670 Http Port The port number which the IE browser visit The default port is 80 Mobile Port The port number which the mobile phone visit The default port is 101 When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 2 PPPOE Choose PPPOE Configuration on the network configuration interface to enter its setting interface Enable v means enable PPPOE protocol and dial up intern
17. et access O means do not enable this function User Name and Password Input the user name and password provided by ISP in the edit box For the edit methods please refer to 3 3 2 4 edit box When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 DDNS Choose DDNS Configuration on the network configuration interface to enter its setting interface Enable v means enabling DDNS dynamic domain name service O means do not enable this function Provider Choose the corresponding servicer amp User Name Password and Domain Name Input the user name password and domain name applied from the internet For the edit methods please refer to 3 3 2 4 edit box When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 8 PTZ Setup Choose the PTZ Configuration to enter its setting interface Channel Select the target channel to be set up and click the select box to select Baudrate Select the Baudrate which matches the connected PTZ Data Bit Select the data bit which matches the connected PTZ Stop Bit Select the stop bit which matches the connected PTZ Checksum Select the check value which matches the co
18. ge the preset point can be invoked start up stop automatic cruise wiper control light control auxiliary device control Note The invoked preset points must have be set up well For the setting methods of the cruise path please refer to 3 8 2 8 PTZ setting If the cruise path number is less than 2 digits you need to add 0 before the corresponding cruise path number to make up for 2 digits 3 8 Menu Click MENU in the main menu bar to enter the main menu page The first level menu includes management tools system setting log search system shutdown 3 8 1 Management Tools Management tools include HDD management user management default configuration alarm clear software update date and time system information 3 8 1 1 HDD Management SATA Displays the current system HDD information V means HDD detected successfully X means no hard disk detected amp HDD Format In the HDD select box selecting the target disk can view the information of the corresponding disk clicking the Format button will show the confirmation page clicking the OK button will start formatting the HDD after the HDD formatting is complete the hard disk can be used normally Note All the videos must be stopped before the HDD formatting 3 8 1 2 User Management Create add and delete user and modify the user information No one has the right to set other user authority except the admin Create New User Enter the User Management
19. he Copy to button the setting information of the current channel will be applied to other target video channels by the system When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 3 8 2 9 Motion Detection Choose the MTD on the system setting interface to enter its setting interface t t t Channel Select the target channel to be set up and click the select box to select Type Motion detection video loss and video block can be chosen Rec CH When the detection occurs the designated recording channel number needs to be triggered Alarm Output When the detection occurs the designated alarm output channel number needs to be triggered Buzzer If buzzer alarm is needed V means enable u means invalid Sensi Choose triggering motion detection sensitivity No Detection means the above setting parameters are invalid Area Setting up the motion detection area For the setting methods please refer to 3 8 2 3 envelop zone setting Duration When the signal detection is complete set up the delay time needed for dealing with each point Send Mail Mail Alarm If mail alarm is needed V means display o means not display Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking the Copy to
20. how a menu which have some option such as 1 CH 4CH 8CH 9CH Playback Record PTZ Audio Menu HD All in one DVR User Manual 3 3 2 Menu Component Instruction The component units of the menu mainly include the following kinds 1 Checkbox Provide two kinds of state options V means valid while o means invalid Use the ENTER button or 1 LJ button or click the left mouse button to choose For example the Channel and Type select box on the page of the file search menu 2 Select box Provide more than 2 options but only one option can be chosen Use Tt J button or click left mouse button to turn up and click right mouse button to turn down For example the Storage Device select box on the page of the file search menu 3 List box Display the search result information in the list You can choose one item and carry out corresponding operation For example press the ENTER button on the list of playback search result or click left mouse button to play this file information Click right mouse button can select cancel this video file in order to backup this video file 4 Edit Box Input target name through edit box For example on the page of the system configuration menu numbers English letters and Chinese etc can be input into the Device Name edit box a Single clicking left mouse button on 123 can switch input type including number upper alpha and lower alpha punctuat
21. ill be invalid Clicking the left mouse button in the red box or long pressing the left mouse button and moving mouse can clear the zone Click the middle mouse button to exit and save Clear All Area Press MENU to clear all the envelop zones of the channel Default The setting image parameter can be restored to the system default value only the restore of image parameters by clicking this button Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking the Copy to button the setting information of the current channel will be applied to other target video channels by the system Note The channel name cannot be copied When the page setting is complete single clicking the OK button the setting information will be saved and it exits single clicking the Cancel button it will exit without saving the setting information 14 HD All in one DVR User Manual 3 8 2 4 Alarm Input Choose the Alarm Input on the system setting interface to enter its setting interface t t t Input Channel Select the target channel to be set and click select box to select Alarm Type High level and low level can be set up Please choose the appropriate level for the alarm connected to the alarm input channel Detection You can set up if the system detect alarm input signal Choose Yes the following setting functions will take effect choose No nothing is conducted PTZ
22. ion Chinese input method There will be current input method indicated following the activity box b After moving the location of the edit box place cursor by gt button on the panel or by mouse pressing the ENTER button or single clicking left mouse button the input keyboard will appear Then select the target characters by direction buttons or single clicking the left mouse button c Delete the character before the cursor by the MENU button or single clicking the right mouse button d After the input is complete exit the edit status by pressing the ESC button or clicking the right mouse button 5 Button Used for the implementation of a specific function or entering the second level set menu Press ENTER or click left mouse button to confirm access 3 3 3 Exit the Menu Mode Pressing ESC or clicking right mouse button can exit the menu mode and switch to the multi screen preview mode Pressing ESC orsingle clicking right mouse button will return to the previous menu 3 4 Main Menu Introduction Press MENU orclick right mouse button to popup the main menu The main menu consists of the following three components Preview Mode Choose the corresponding preview screen mode in the menu bar Shortcut Menu There are video playback manual recording and PTZ control shortcut menu in the menu bar from which you can enter the corresponding menu page directly Main Menu Bar After entering the menu bar ther
23. kana 18 4 Client Operation Instru tHOmM ee oi esa i sest adado E hda savi 19 4 1 The Main Page of the Video Monitoring ooovnvn nv 19 4 2 Bit Stream Selection ou sesssssesesssescscscscsescscsescsesescsesesssesssesesesesesesesesesesesesenesesenenenees 20 A PTZIGONNO Re at goo e RR E Get RE E I RV NORTON 20 4 4 Advanced Setting BOX ccecsssesssesessssssssssssesesesesssssssssssesesesessseesesseseseseseseseeseseeeees 20 4 5 TalkBack CON FO preven peer reer eer ver ever nana aaa NETOA EERE REA RER 20 ZLO C ONNJUTANOM ee na 21 AJ REMOTE Play Dal aan jeo ije A AE AA ondak 24 HD All in one DVR User Manual 1 Product Introduction 1 1 Product Summary This device is a digital monitoring and recording product specially designed for the security field which integrate a revolvable 10 5 inch digital LCD panel The device combines with the latest technologies in the IT field such as standalone processor and standalone Linux operating system video and audio compression decompression large capacity HDD record TCP IP network etc The code is embedded in the FLASH chip which makes the system running more steadily This device has both features of digital video and audio recording DVR and digital video and audio server DVS It can not only work locally and independently but also compose of a powerful security monitoring net with networking With the use of professional network video surveillance platform network software it can ful
24. l 1 means close Preview Mode Click BSES or double click the preview window screen by mouse in the switch box under preview mode to switch between single screen or multi screen preview mode 4 2 Bit Stream Selection This device supports double bit stream Choose the bit stream type of video preview in the bit stream select box 4 3 PTZ Control CO A PTZ direction control button You can control the PTZ operation direction by the up down left right button B IIS The aperture button You can control the PTZ aperture by enlarge and diminish button j Focus Focus button You can control the PTZ focus by the farther adjustment or nearer adjustment D Zoom Zoom button You can control the PTZ position by zoom out and zoom in 4 4 Advanced Setting Box When the preview window opens the video preview this function will be activated Click right mouse button to open the advanced setting box amp Turn on off Audio Turn on or turn off the audio of the previewing by this button channel amp Screenshot Capture the current video image and save it as image format For the settings of directory storage please refer to the figure 1 5 5 video screenshot directory storage Recording Turn off Recording Turn on off the remote recording of the video of this channel and save this recording For the settings of directory storage please refer to 1 5 5 video screenshot directory storage PTZ Setting Conduct the set
25. le click the right mouse button or press ENTER onthe panel in the user list to select the target user then click Delete to delete the user 3 8 1 3 Restore Default Restore the system configuration parameters to factory configuration The system will restart after the restore is complete 3 8 1 4 Alarm Clear Clear all the alarm information manually When the alarm is cleared successfully the system will indicate Alarm has been successfully cleared Confirm and return to the page of management tools 3 8 1 5 Software Update Choose the Software Update on the management tools interface to enter the operation interface Select the target to be updated in the update select box then select the update mode in the update method select box FTP or USB amp USB Update Copy the file to be updated to the USB root catalogue insert USB and click OK to update the system FTP Update Put the file to be updated to the FTP server root catalogue and set the IP address of the server as the designated address then press OK to update the system After the update is complete the system will restart automatically Note The update name of the main board should be mainboard bin the update name of the panel should be panel bin When the system is being updated do not disconnect the power so as to avoid device failure 3 8 1 6 Time Setting Enter the date and time page input the exact date and time in the Date Time edit box then c
26. le clicking the File Search button will enter the search result interface t t t Video File Playback In the list box of search result positioning the target file by the up and down button or moving mouse click ENTER or left mouse button to play this file Page Turning The searched video files are page displayed Single click Page Up Page Down button or input the target page number in the page number box and then press Jump button or scroll the middle button of the mouse to turn the page Backup In the list of search result positioning the target file by the up and down button or by moving mouse and then use the FN button or right mouse button to select the file In the storage device select box selecting the target storage device then clicking the Backup button will backup the selected video file to the target storage device Cancel Button Return to the previous menu 3 5 3 Playback Tool Control Choosing file playback or playback by time will enter the video playback interface Playback Toolbar Playback toolbar will appear at the bottom of the playback interface Click right mouse button can hide display the toolbar When multi screen playing back simultaneously clicking right mouse button to hide the toolbar then the corresponding channel video can be enlarged or diminished by single click left mouse button Stop playing Click o the system will stop ah and return to the playback interface
27. ly reflect its strong networking and remote monitoring capability It can be used for the security protection in the fields of banking telecommunications electronic power justice traffic residential factory warehouse water conservancy facilities and other areas and departments 1 2 Parameters 8 CHANNEL Multi tasking operation simultaneous multi channel recording simultaneous video playback and simultaneous network operation Video Output Digital LCD panel 10 5 inch Resolution 1024X768 CVBS VGA Resolution 1280X1024 Audio Input 4ch RCA 8ch RCA Audio Output ich RCA Voice Talkback ich RCA Playback Resolution PAL 352x288 CIF NTSC 352x240 CIF Image Control 1 6 level are selectable Motion Detection Each channel can set independent detection zones and multilevel sensitivity Video Display 1 4multiple display 1 4 8multiple display Live Video Resolution PAL 720x576 DI NTSC 720x480 DI HD All in one DVR User Manual PAL 25f s Adjustable NTSC 30f s Adjustable Ach HD All in one DVR User Manual 2 Product Outside Structure Introduction 2 1 The Panel Instruction HD ALL IN ONE DVR 8 USB USB Port connect to USB disk or mouse VV 9 Led Light POW Power REC Record NET Network _ _ o 6 VGA VGAport S 8 ALARM Alarm input output RS485 port S 9 POWER DC L2V 3A power input S HD All in one DVR User Manual 2 3 Remote Controller Instructi
28. nd clicking the File Download button the target file will start downloading after setting the storage path The progress bar at the bottom indicates the file downloading status 24
29. nfoParam Others ServerSettingl nfo DeviceName H264 NDVR IP Addr 192 168 2 63 Mac Addr 00 21 23 43 31 61 Port 6650 DeviceID NetMask 255 4300 D 0 Overyrite Gateway 192 6s is PON Lock Time DNS LOZE ee BIKINI PPPoE E 55 Ves v Never v Never Standard AL X PPPoE User test Opaque v hinese v Auto Switch Preview Mode HTTP Pot fso VGA Resolution s00 600 PPPoE Transparency DHCP m Language t DDNS U State Display DDNS Service 3322 AlarmInNum DDNS Domain zerging 332207 AlamOutNum 4 DDNSUser zeging DeviceModel 9000 16 DDNS e E Version V _1_2_1 t6 build Oct 22 2009 4 6 2 Channel Parameter Configuration 21 HD All in one DVR User Manual Settings ServerParam ChannelParam AlanaParam UserlnfoParam Others Channel Param Info Channel ChnName DI Image Param IZ Show Chn Name M Show Time Preview Hide Record Param Steam Type Video BitType CBR BitRate 2Mbps Quality Good FrameRate Ful Pre Rec No Schedule Set SubStream FrameRate 10 Bit Rate 256Kbps PTZ Param Baudrate 2400 Data Bit E v Stop Bit fi v No bd Check Protocol Pelco d v Decoder 1 1024 1 Control No s On this setting interface you can set the corresponding parameters of the host side The setting parameters match with the host side For the setting methods and notes please refer to the host side image setting recording setting and PTZ setting
30. nnected PTZ ee e 16 ee e HD All in one DVR User Manual Flow Ctrl The selected items must match the PTZ flow control setting Protocol Type The selected items must match the PTZ protocol Decoder Input designated decoder address Preset Preset point is to preset and memorize the position focus aperture and zoom of the camera and use a number to identify these settings at the same time 1 Add Preset Point Input a preset point in the preset point edit box ranging from 1 128 then adjust the camera to the target position When the adjustment is complete pressing set the preset point will be saved 2 Delete Preset Point Input a preset point to be deleted in the preset point edit box click Delete Cruise Cruise path is a path on which a camera running at a certain speed It passes various cruise points with numbers Each cruise point includes stay preset points and retention time Thus the settings of cruise path include the parameters setting for the cruise point preset point retention time and cruise speed etc Corresponding information can be set up on the Setting interface At present one device supports the setting of 16 cruise path numbers Track Track is a line which is used to record the predefined irregular movement of the camera Entering Setting can set track Copy to Selecting the target channel in the select box on the right side of the Copy to button single clicking t
31. on es eng Playback Play pause fast forward fast back play as one frame pre and next MUTE Mute on off The operation of remote controller is same as front panel DEV After pressing the DEV button press the number button and input the device number which is consistent with the host Press ENTER and save the setting Then the control operation on this device comes into effect SHIFT This version does not support this key CLEAR Clear current selected area when setup the motion detection region Note When there are multiple devices in a same place the remote control should choose a device first according to the device number Therefore you should define one unique device number for each device otherwise the remote control operation may simultaneously affect the multiple devices which are with the same device number HD All in one DVR User Manual 2 4 Video format Setup the video format by video format switch jumper on device main board PAL format state NTSC format state HD All in one DVR User Manual 3 Operating Instruction 3 1 Turn on off DVR 1 Please confirm the access AC voltage matches the requirements of the DVR and ensure that the middle earth terminal of the outlet connected to the ground well After accessing to the power the device will startup and the POWER led will become red 2 Press the Shutdown button in the menu DVR will stop work but still power on If want to power off th
32. onfirm and save or cancel and exit 3 8 1 7 Version Information Check the relevant information of the device name item number and the version number 3 8 2 System Setup Choose the System Setup to enter the sub menu interface on the main menu interface including system parameter code parameter image parameter and alarm input alarm output Schedule motion detection PTZ configuration and network 3 8 2 1 System Setup Choose the Setup and enter its setting interface on the system setting interface amp Device ID When using the remote control to operate the device the communications with the remote control is realized y the device number To realize the remote control operation the remote control must correspond to the device number For the settings of the remote control device number please refer to 2 3 remote control instruction 12 HD All in one DVR User Manual Device Name Device name is normally defined as the area name of the monitoring point When remote access you can find the monitoring point to be visited intuitively The default device name is LCD DVR For the edit method please refer to 3 3 2 4 edit box Overwrite When all the hard disks inside the device are full choose Yes the system will overwrite the earliest video information to achieve the purpose of cycle recording Lock Time There is no operation within the keypad lock time The system will cancel the current user automatically To operat
33. press the ENTER button or click right mouse button to save and exit Clicking the ESC button will exit without saving Image Parameter The brightness contrast hue and saturation of the channel image can be configured Use the Tt 1 button on the panel or mouse dragging the scroll bar to adjust Blind Set the Envelop option mark to be V to activate the Zone button and enter the envelop zone setting interface Area Blind Zone On the blind zone setting interface a small yellow box will appear in the middle of the area namely envelop setting box Zone Creation move the yellow box to the start position of the setting area by the direction buttons of the panel Press FN button switching between yellow box and red box to change it into red box red box is the effective cover area box then adjust the zone size by direction buttons The minimum size can be set up is a small box while maximum 4 envelop zones can be set up Single click or long press left mouse button and move the mouse can choose zone After the setting is complete press the ENTER or click the middle mouse button to exit and save Clicking the ESC button will exit without saving Local Clear Area Move the yellow box to the start position up left of the zone to be cleared Press FN it will change into a small black box local clear box local is cleared After the clear is complete press ENTER button to save and exit If press ESC the clear operation w
34. tings of PTZ preset point cruise path track For the setting methods please refer to 3 8 2 8 host side PTZ setting OSD Setting Set up the channel of OSD layer time display position Mouse drags the position and saves after confirmation amp Motion Detection Setting the motion detection area First V displays motion detection area Choosing Add Area pressing left mouse button and dragging on the screen there will be a latticed area with white lines namely motion detection area Choosing Clear Area pressing left mouse button on the screen of the latticed area with white lines and mouse dragging the latticed area the white lines will disappear The motion detection area is cancelled Choose the corresponding parameter in the sensitivity and output delay box amp Screen Adjustment Set the brightness contrast hue saturation Click left mouse button or adjust by dragging It will save automatically when exit 4 5 Talkback Control Click to open voice and initiate the talkback actively 20 HD All in one DVR User Manual 4 6 Configuration 4 6 1 Sever Parameter Configuration On this setting interface you can set the corresponding parameters of the host side The setting parameters match with the host side For the setting methods and notes please refer to the host side system configuration system information and network operation instruction Settings ServerPara ChannelParam AlarmParam Userl
Download Pdf Manuals
Related Search