User manual - EchoMassager.com
Contents
1. with plain water reposition pads to a muscular area not directly on bone If still no change it may be time to replace the electrode pads Contact local supplier visit us at www echomassager com to order replacements S Did not provide adequate relief Being a drug free stimulation highly dependent of individual factors it may require longer extended use We recommend daily use several times per day 20 60 minutes per session Recommended application points www echomassager com2. 60 minutes at a time or as needed Adding a little stretching before and after use will dramatically improve results How to for best results Always apply 2 or 4 electrode pads simultaneously 1 pad will not work Try to focus on a specific body part at a time For example if you have a sore shoulder attach the electrode pads directly to the problematic shoulder Target the most painful spots You can surround the painful area by sticking the pads either around it and directly to it on the same body part or on opposite body sides front amp back left amp right The latter works best for joints TIP Every individual has unique muscle and nerve systems experiment by moving pads around to find best application points Troubleshooting S Screen is on but no sensation is felt in the electrode pads Ensure that the lock key is off the lead wire is fully inserted into the port 2 electrode pads are connected to the wire and both pads are attached to bare skin on the same body part Increase intensity gradually S Device does not turn on or the screen is dim Battery is low needs to be charged recharged One pad feels stronger than the other Reposition pads by moving them around for the most comfortable sensation However this is entirely normal as different areas have different sensitivity During use there is a burning stinging sensation from the pads or they do not stick well to the skin Try cleaning them
3. SCHO Massager Pro User manual Storage Battery board status Charger port ANE Intensity CLLLELLETEELE LEE LE Pause Resume Timer Channels ZA i Intensity USB power controls USB cable adapter Item check list Check that all the following items have been included with your massager If anything is missing contact your dealer Control unit USB charging cable USB power adapter 2 electrode lead wires 2 sets of electrode pads Storage board for pads User Manual Warranty information For your safety Do not use this device if you have a cardiac pacemaker are pregnant have been diagnosed with cancer have undiagnosed pain symptoms etc For chronic medical conditions and for your peace of mind we recommend you to check with your physician before using this device Do not use on children sleeping people and while operating machinery Do not apply to frontal neck area transcerebrally transthoracically over eyes and mouth Do not share the electrode pads cross contamination can occur Discontinue use If you experience adverse reactions Quick Start Guide S Remove the device from the tray x Plug the smaller end of the USB charging cable into the top of the device amp the larger end into a power source Charge for 8 hours S Disconnect from power source and plug 1 electrode lead wire into either one the 2 ports at the bottom of t
4. he device Snap electrode pads onto both ends of the lead wire s Take the protective plastic films off the adhesive surface and stick both pads on bare skin on the same body part of your choice making sure electrode pads do not overlap s Slide the power switch located on the top of the unit into ON position the screen should come on s Press the key located on the right side of the dial as many times as needed until the sensations are strong enough To reduce intensity use the key To change settings press the M key located on the top of the dial Make sure you increase the intensity every time you change the setting TIP the gt II key in the middle of the dial is for LOCK UNLOCK purposes only By pressing it you lock the device To operate device make sure you do not press this key How to use the buttons ON OFF power switch slide right left to turn the control unit ON OFF M mode selection by pressing this key you can follow the icons animating on the screen The mode that is active is the one with a flashing icon IF the key symbol His flashing your device is in LOCK PAUSE position please press the IT key once to unlock keys and resume operation T timer selection default 20 minutes shown in the middle of screen intensity adjustment to increase amp to decrease Intensity is shown in bars shown below the word Intensity from O to 20 gt Il lock unlock press it to PAUSE the use of
5. ly damage them Use only electrode pads supplied by the manufacturer as other electrode pads may present incompatibility and user hazard Always power off device before moving the pads to a different spot location or taking them off We also recommend Your ECHO device is equipped with 2 lead wires and 2 sets of electrodes for a dual stimulation Our wires are universal and interchangeable between all our accessories electrode pads shoes etc For a more targeted and specialized use please consider Echo Massager Shoes S Multi purpose Belt Other products available at www echomassager com A little bit of science What is TENS Transcutaneous Electrical Nerve Stimulation Cutting edge non invasive nerve stimulation technology used for temporary pain relief What is EMS Electrical Muscle Stimulation Revolutionary modern day technology designed to stimulate improve amp facilitate muscle performance Attach the electrode pads to the muscle of your choice Select the mode and power within a comfortable range and let the device do the rest FDA has granted this device a Class Il medical device classification It offers 8 different patterns of bio electrical waves and it operates on dual channels in order to enhance and increase coverage Make sure to experiment with the modes and various intensities as individual tolerance amp efficacy may vary For best results our recommendation is daily use several times a day 20
6. the device Press it again to UNLOCK and RESUME use The lock function is ON when the key lock icon appears In the top left corner of the screen TIP The device will only send out electrical pulses when there is a lead wire connected to the control unit with 2 electrode pads attached to it AND only if BOTH electrode pads are on your skin Charging Recharging battery Attach the USB cable into the power port and into the USB power adapter The power port is located on the top of your device Plug the adapter into an electrical outlet to charge the battery You can also charge your ECHO device by detaching the USB cord from the power adapter and connecting it to a computer s powered USB port hub Care instructions Do not use your device or its accessories in rain or near sinks or other wet locations If it does get wet unplug all cables turn off the power Wait for the device to dry completely before sliding the switch to power again Your lead wires and electrode pads are made of durable and long lasting materials Nevertheless they are consumable parts therefore it is entirely up to you how frequently you will be replacing them Always wipe your skin clean before applying the pads and apply a few drops of water on the adhesive Side in order to maintain their stickiness Replace electrode pads that do not adhere fully to your skin or are damaged TIP Remember to never stick the electrode pads together as it will permanent
Download Pdf Manuals
Related Search