SEVEN STARS
Contents
1. x D d LASER DISPLAY SYSTEM MANUAL SEVEN STARS Big Dipper Laser Science And Technology Co Ltd REV 1 00 Please read the manual carefully before using Laser Display System Manual Model K850RB Notices 1 This is 3B laser product Do not exposure the human eye directly to the laser light 2 Please follow the instructions Do not disassemble this product Please contact the professional person if there is a malfunction 3 Installation should be done by a professional technician 4 Please place the product far away from strobe lights 5 The product should be placed in a dry place Do not use the product in a wet or dusty environment Water proof fittings required if it is used outdoor 6 Do not touch the product or pull the power wire by wet hand 7 The work temperature of laser product is 10 40 C The product will not work normally in a low temperature environment 8 Do not turn on or off the product frequently Otherwise the service time of lasers will be affected Besides keeping working for a long time should be avoided 9 Fixed installation to prevent the product from strong vibration or shock 10 Prevent foreign objects from entering the product to avoid malfunction 11 Keep the distance between the product and the objects in the lighting 1M at least Page 1 12 Do not connect the power cable or turn on the light before installation 13 Make sure the plug has been wi2. 3 When both of the address code 9 and 10 is on it s center point debug mode Page 6 2 Before installation please check and make sure the power supply voltage is suitable to the product 3 Please check ventilation fans or exhaust passages are cleaned 4 Fixed installation 5 A wire ground connected is needed for power supply Back panel Key press function instruction 1 Microphone Sound signal IN 2 DMX ADDRESS Binary format switch 3 DMX 512 IN DMX signal input 4 DMX 512 OUT DMX signal output 5 Fan 6 Input power line Page 3 Technical Parameters Model K850RB Parameters 1 LASER diode Red Blue 2 Power supply 100 240V AC 50 60Hz Gross weight LASER power R2300Mw Bz2400Mw Scanner angle 15 5 DMX Channels 10 More than 50 kinds of light beams and patterns displaying laser patterns specified 6 Effect by the ILDA such as diffusing laser network Slowly rotating color fan time and space tunnel and fairy flowers Can be Customized by customers 7 Control mode Sound control Auto control DMX control 9 Dimensions 218 189 136mm 10 Awenn 2 04 2 8KGS Page 4 DMX channel setting Channel DMX value Control Content 0 69 Shading 1 Play 70 139 Auto mode Sound activated Mode 140 209 Auto mode auto activated 210 255 Manual mode oon 0 16 Static pattern 17 255 Dynam
3. ic geometry pattern 3 Strobe 0 255 NO 4 Pattern 0 167 Display Normally display 168 188 Light spot display 0 160 Manual adjustment 5 Pan 161 190 Automatic loop from left to right 191 220 Automatic loop from right to left move Automatic loop from right to left and 221 255 right to left 0 160 Manual adjustment 6 Tilt 161 190 Automatic loop from down to up mov 191 220 Automatic loop from up to down Automatic loop from up to down and 221 255 down to up 0 10 No 11 92 Manual zoom TER 93 146 Automatic loop from small to big 147 200 Automatic loop from big to small 201 255 Automatic loop from big to small and small to big 8 Color 0 255 No 9 Reset 0 255 No 0 No 10 Color Color fade Color wipe effect A 1 100 gradient adjustable speed 101 251 Sound shift Color fade and wipe effect Page 5
4. lear regularly because the heat radiation effect will be affected by the dust for the long time use Warning Power off before installation or maintenance Declare The product is with good performance and complete package when it is delivered The end user of this product should follow all the above instructions and warnings Any damage caused by misuse malfunction and problem caused by ignoring the instructions are not included in the repair guarantees of the manufacturer or dealers All products made from Big Dipper Laser Company have anti fake identification please verify the anti counterfeit label at the bottom of the case to ensure the interests of consumers Page 7 Sound switch color gradually draw Gradually erase reer effect Remark All related to The function of color can t Be exist without the modulability Static and dynamic pattern can be shifted by DMX operate simply Function and flexibly Under the Sound Mode if no sound once over 10 seconds graphic is closed automatically Remark DMX512 mode intermittent signals will lead to shut off of laser diode ADDRESS DMX address setup 1 When Dipswitch 10 is set to ON the functions for 1 9 is as follows The 1st code is off sound mode host LASER The 1st code is on Auto mode host LASER The 2st code is on Slave laser 2 When Dipswitch 10 is set to OFF the system can be controlled by DMX512
5. red up properly before being powered on 14 After running constantly for three hours turn off the product for 25 minutes at least for cooling to reuse 15 Turn on the product before opening the laser show control software Otherwise the laser show control software need to be reopened 16 Use the original shake proof packing for re transportation 17 x This symbol indicates separate collection of electronics and electronic equipment Inspection In order to use the product securely and properly please read the manual before using and follow the instructions strictly to prevent personal safety trouble and product damage caused by misuse Take care of the product check the possibility of the product damage caused by transportation and check all the machine and listed accessories are present upon receipt of the product 1 x LASER display system 1 x User manual 1 x Power cable Installation 1 Be sure no flammables or explosives are placed in the range of the equipment at least 1 5M Meanwhile be sure the internal distance between the wall and the light more than 0 5M before installation Page 2 Maintenance Clean the lens regularly Do not use a wet cloth or chemicals but a cotton swab with alcohol to clean the lens The maintenance frequency depends on the usage frequency and surrounding working conditions of the product Clearance per 15 days is recommended Besides dust cover at the product side should be dismantled to c
Download Pdf Manuals
Related Search