Home

GV-101 User Manual

1. 67 7 2 1 9 To Set the Route isi edi ED eene 70 7 2 1 9 To Set the Region Options 71 7 2 1 10 To Set the Display Options 12 7 2 1 11 To Create Add to the Favorites 15 73 7 2 1 12 Add a Label to Your 75 T0 Demo Nav IC al ON tend itt 76 EPA onion 78 PROTON T 79 7 2 9 MOVIE Play OAC sere e 80 p NAP BP VAY 82 T2405 Creaune a Play Last 82 2 Basic 94 Play the Created Play List Change the Playback Mode of the Play List LRA MING EUa ZET 85 7 2 5 Optional Blue tooth HandsFree Carkit 85 7 2 5 1 How to Use the Hands Free 85 7 2 5 2 How to Set Up Blue tooth HandsFree Carkit witha 86 Mobile Phone 7 2 5 3 Blue tooth Mobile Phone Settings 88 7 2 5 3 1 Adding and Delete Phone Settings 89 23 52 Connecting to a Phone o ees 89 7 2 5 3 3 Disconnecting the Mobile 90 7 2 5 3 4 Adding before the Setup Number 92 Ti 2 SNS WEAN Calls e cee aed pue Ru 93 7 2 5 5 Hane UD the alls eet telnet 93 15
2. Select channel Figure 8 2 2 97 42 66 UMH Ze i saw Detault Setting LLL 88 0 NLETZe Table 8 1 54 Le He Le He Le He Le Step 2 Insert the other end of the audio adapter lead into the headphone socket on the left side of the device as shown in figure 8 2 3 Figure 8 2 3 Step 3 Figure 8 2 2 shows the FM Channel For more information about the FM Channel and Speakers adjustments see Table 8 1 98 Troubleshooting If the GV 101 did not boot up successfully or does not function properly l Please refer to Ch 3 of the user manual to see if the SD card 1s properly installed in the driver Please refer to Ch 2 2 Section 7 of the user manual to confirm the SD memory card is inserted into the SD expansion slot Please refer to Ch 2 2 Section 1 of the user manual regarding the Status Indicators Please check 1 the Power LED 15 lit in orange If lit in red the battery is not fully charged If this is the case please charge the battery and the orange LED will start to blink Please refer to Ch 5 5 1 of the user manual with section entitled Soft Reset and follow the steps accordingly If this doesn t solve the problem continue onto Step 5 Please refer to Hard Reset under Ch 5 5 2 Performing a Hard Reset should solve the majority of problems When the GPS cannot locate a fi
3. 3 If GPSinfo indicates the incorrect time please check the Status to see it shows the GPS LED is in BLINKING green or not If it s in SOLID green it means GPS has not found its fix yet 102 4 Ifthe GPS has found its fix but the time display is still incorrect Go to Set the Region Options and adjust the Time Zone setting of CarNavigation software When the battery light turns red A red light indicates the battery requires charging An orange light blinks when it s charging and solid when it 1 fully charged When the HandsFree operation cannot be executed 4 Please make sure the HandsFree Carkit Module 1s properly installed 5 Ifnot please refer to 7 1 2 Index A Blue tooth HandsFree Carkit Installation to install the application 6 After the HandsFree Carkit Module is fully installed please check to see 1f the Blue tooth LED 1 functioning normally standby flash once every 3 seconds Connecting flash twice every 3 seconds Under Connection flash three times every 3 seconds Talking flash four times every 3 seconds When the Map Data is not showing in the GV 101 In some cities if the map is not displayed on the monitor it may be because it has not been downloaded into the memory card Please refer to Ch 3 for map upgrade 103
4. 30 mi Step 4 Tap La to set this location as your starting point and see the location on the map or Step 5 Fav Tap E to add this location to your Favorites List or 2 pel jam soe pres X429 Bo dx Iri ml 8 Fo IR g MJ BE of Juri Fs UL I 288 Le Re LIECHTENSTEINISCHES LANDESSPITAI Cancel 52 Step 6 to delete this location from your Recent List 7 2 1 7 To Enter a Destination from City Centre Step 1 Alphabetical SWITZERLAND z mar 8 u Step 2 mx EM 11 enter the state 53 Enter State Name TENNESSEE Within 40 KM TENNESSEE TN 79 to enter the city name first 7 2 1 7 1 If You Selected Alphabetical then follow the steps below Step 1 Enter city name and 54 City Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 2 From the match list select the desired intersection 4 Centre E e Step 3 to navigate to this location or 55 KIRCH V 6 9 mi Step 4 Fav Tap E to add this location to your Favorites List or 9 Cancel Step 5 Map Tap to set this location as your starting point and see the location on the map Panning Map Click on
5. high quality voice guided instruction Powered by cigarette lighter or long life rechargeable battery Easy to be mounted and removed Built in antenna MMCX type connector for optional external antenna SD and CF storage card expansion slots Supports MP3 Movie Player dat and mpg format amp Playback Function Supports Photo View Senses lighting conditions for automatic backlight dimming Optional FM transmitter for re directing MP3 output and voice guidance to car audio system not legal in some countries Optional Blue tooth Module for HandsFree Operation 1 2 Specification 1 2 1 Hardware Processor Samsung 53 2410 266Mhz Screen 3 6 320_240 pixel color TFT LCD Memory 64 MB SDRAM 32MB flash memory Battery Replaceable and rechargeable 1650 mAh Li ion battery GPS Receiver SiRF Star high sensitivity chipset 20 channel All In View tracking Built in active antenna MMCXc type connector for optional external antenna Sound Internal stereo loud speaker Output Audio Headphone x 1 Power Cigarette plug or universal adapter USB Port USB x 1 supports FM transmitter SD Expansion Slot SD x 1 supports SD or Multi Media Card 5 CF Interface Slot CF x 1 supports Compact Flash Card Blue tooth Expansion Slot Blue tooth module for handsfree operation x 1 Physical Size 140 mm 92 mm W 35 mm D 1 2 2 Software Microsoft Windows CE Net 4 2 Core version SD card or CF card with Global View Sof
6. must be on the same memory card before use Step 2 Insert the PC application CD GlobalView American application installer or GlobalView Europe application installer into the CD ROM drive The installation will automatically start When the application has loaded click System Disk on the start menu Step 3 On the install menu click Refresh to show the Device List and select which means the CD has inserted into the flash memory card however shows memory card installed Click Start to start the CD copy to the selected memory card 10 Memory card inside memory card za nee 1422MB OEB Step 4 The correct window is shown below after the CD is completed 11 4 Download Data to Memory Card 4 1 Europe Map to the Memory Card 4 1 1 Install Europe Map Loader Software Step 1 Make sure the flash memory USB card reader 1s connected to PC and the system memory card is inserted Note GlobalView Application Software and Map must be on the same memory card before use Step 2 Insert the GlobalView Europe Map Loader CD1 into the CD ROM and then run the CD ROM driver setup setup exe Choose a Setup Language window and click OK Choose setup Language X Select the language for this installation from the choices below Step 3 Click Next on the Install
7. to Return 7 2 1 7 2 If You Selected By Distance then follow the steps below Step 1 Nay Tap to navigate to this location or EXIT 9 SEVELEN VADUZ ut z amp mi JM E a M I3 _ 1 E m E 1 1 i n L 1 II scat m hit LE y HER Step 3 Fav Tap E to add this location to your Favorites List or 57 Step 4 7 2 1 7 3 You Selected List ALL then follow the steps below Step 1 Enter city name and M 58 Enter City Name Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 2 From the match list select the desired intersection Step 3 Tap to navigate to this location or 59 EXIT 9 SEVELEN VADUZ Step 4 Fav Tap E to add this location to your Favorites List or 60 7 2 1 8 Set the Route Options Step 1 ven and then toute Ook to open the Route Options Screen Step 2 Select the desired options Method Quickest Step 3 Method Select the method of routing The quickest route shortest route route that favors major roads or route that favors local roads Toll Roads Select whether toll roads should be included or excluded in the route calculation Ferries Select whether carpool lanes High Occupancy Vehicle Lanes should be included or excluded in the route calc
8. to navigate to this location or 47 2 2 mi Step 3 Iri FU dv o rites a iesu C m LC IT E mius LAND rool AL Cancel Step 4 to set this location as your starting point and see the location the map 48 7 2 1 5 To Enter Destination from Favorites Step 1 ven Destinations and then Favourites Step 2 Select a destination from the list if you have already created one Step 3 Tap to navigate to this location or OBERRIET RIJTHI i i AES 1 j D 1 P a Step 4 LE to set this location as your starting point and see the location on the map or 49 Panning Click on to Return Step 5 Edit Tap to create a label such as HOME for this destination or change the label if one already exists or Edit Favourites KAMTONALES SPITAL APPENZEL 50 LI PADRUSWEG FLASCH CH Edit 7 2 1 6 To Enter a Destination from Recent Step 1 Del Li M Step 2 Select the destination Step 3 Tap LE to navigate to this location or 2d EXIT 5 OBERRIET RUTHI 15 mij 1
9. 3 The Equalizer The GV 101 has 4 equalizer settings to suit the style of the music To select the style simply tap and There are four types of style Default Classical Rock and Metal as shown in figure 7 2 10 Classical Figure 7 2 10 7 2 5 Optional Blue tooth HandsFree Blue tooth handsfree carkit is an external connector Once installed on the GV 101 it will become a blue tooth handsfree car phone enabling you to make and receive calls without touching the mobile phone Note See 8 1 Index A for the Blue tooth HandsFree Carkit Installation before use 7 2 5 1 How to Use HandsFree Carkit Instruction Tap B ted on the main menu then tap to enter the handsfree application as shown in figure 7 2 11 73 Figure 7 2 11 Screen Overview ves C Initiates an outgoing call or accepts an incoming call NO R Redials the last used number Terminates the current call Displays the phone book Clear calls ce Displays the setup options screen as shown in photo 7 2 11 7 2 5 2 How to Set Up Blue tooth HandsFree Carkit with a Mobile Phone Prior to linking the mobile phone to the GV 101 you need to ensure that you have a mobile phone equipped with a blue tooth headset or handsfree profile Consult your phone manual or phone provider if you are not sure Step 1 5 After tapping the key from the main phone display as shown in
10. figure 7 2 11 the settings screen 15 displayed as in figure 7 2 12 74 Figure 7 2 12 Step 2 Tap to enter the blue tooth setup mode as shown in figure 7 2 13 Figure 7 2 13 Step 3 to start pairing the phone The screen will show Pairing as shown in figure 7 2 14 At the meantime look for the name HandsFree on your mobile phone and enter the pass code 0000 if it is requested The carkit will go back to its main function screen once the pairing has been done successfully Note 1 The carkit in GV 101 only supports handsfree profile Most of the blue tooth mobile phones on the market support this profile Make sure all your Blue tooth mobile phones support the handsfree profile before attempting to pair the devices 2 For some mobile phones like T610 you can easily change the device name from the option menu All the device names have to be in English otherwise the error message Unknown Device will appear on the GV 101 3 When the pairing is completed Unknown Device will appear on the GV 101 After the blue tooth 15 fully connected with the GV 101 the selected device name will be shown on the device 75 Blue tooth is a standard for connecting devices together to perform certain functions However different companies implement the standard in different ways and incompatibilities could occur Figure 7 2 14 7 2 5 3 Blue tooth Mobile Phone Settings The GV 101 is c
11. shown as in figure 5 13 If this failed please repeat steps 1 and 2 After all the steps are finished touch the screen and the main menu will appear on the display 25 Mew calibration settings have been measured To touch the LCD to accept the new settings Figure 5 13 26 6 Changing the Battery GV 101 contains a replaceable battery A flip up battery lid makes it easy for battery removal by following the steps below Step 1 Open the battery cover as shown Figure 6 1 Figure 6 1 Step 2 Remove the battery by using a finger as shown in figure 6 2 Figure 6 2 Step 3 Figure 6 2 shows the battery replacement process following the red arrow and figure 6 3 shows it correctly replaced u s a pir L I P an Ta gt o Figure 6 3 7 Software 7 1 The Main Application Screen The main application screen controls the GV 101 All the main features are accessed from a menu with six icons 28 5 Figure 7 1 1 1 Navigation 4 Setup 2 Photo View 5 MP3 Player 3 Movie Playback AVI MPEG Functions 6 Blue tooth HandsFree 7 2 Detail Software Functions 7 2 1 Car Navigation System 7 2 1 1 Window Overview 7 2 1 1 1 Main Menu 7 2 1 1 2 Map Display 29 MEIERHOFS Distance to next movement Route indicated in blue Car cursor DEST 400 ft MEIERHOFS IRASSE 7 2 1 1 3 Navigation Display Dire
12. to City First method 7 2 1 4 To Enter a Destination from Points of Interest Step 1 us A DestinsHonss and then Step 2 Tap one of the categories for Points of Interest m Ponts or Interest Dia Thetan besorgen de ERU e lor e re ute Attraction Recreation Emergency p f ils Eu 1 EM 4 Government Restaurants a ies io 44 Step 3 as shown in the figure below E TENNESSEE TN Change e LI 7 2 1 4 1 If You Selected Alphabetical then follow the steps below Step 1 Enter the name of the destination Enter POI Mame L LANDESKRANKENHAUS FELDKIRCH ANDESKRANKENHAUS GAISBUHEL ANDESKRANKEHHAUS RANKWEIL IECHTENSTEINISCHES LANDESSPIT AL Step 2 Select a matching POI location from the list Step 3 Tap ES to accept the location The location details will be shown 45 Un eps ae LANDESKRANKENHAUS _ Step 4 EXIT BUCHS GRABS 3 7 ml Va Step 5 Fav Tap E to add this location to your Favorites List or 9 Cancel 46 Step 6 to set this location as your starting point and see the location on the map Panning Map Click on to Return 7 2 1 4 2 If You Selected By Distance then follow the steps below Step 1 Select POI List LIECHTENSTEINISCHES LANDESSPITAL Step 2
13. to install Select the components you want to install clear the components you do not want to install 16073 K Destination Folder C Program FilessMetrapa ntelliM a Europe Installshield lt Back Next gt Cancel 13 Step 6 Click Finish to finish installing Installshield Wizard InstallShield Wizard Complete Setup has finished installing Intelli a Europe on your Computer lt Back ance 4 1 2 Upload Europe Map to the Memory Card Step 1 Evrope Map Click the icon of Desktop and click on the welcome menu Clobal iew Europe Loader Welkome to the GlobalView Europe Map Loader WARNING If you do not have a storage card or have less than 64 MB of storage space avaiable we recommend using the Citw Radius method Click the By City tab in the upper left portion of the map loader window to choose this method If vou have a MS card with at least of storage space available we recommend selecting map areas by States Click the By States tab in the upper left portion of the map loader window to choose this method Step 2 14 Choose both a country and the CD ROM for download then click Generate Switerlend Lwchtenzem 1 7 United KingderneTrish Republic Step 3 The download the map data 15 now running and storing into the flash memory card 15 navigator
14. 0 6 Chains ie the Batley 32 7 Software Tod 33 re 34 7 2 1 Car Navigation System 7 2 1 1 Window Overview P Walls Vey 34 1 21 12 Map 35 7 2 1 1 3 Navigation Display 35 Status toi 36 7 2 1 2 Selecting Your 36 7 2 1 2 1 If You Have Selected Street First 37 7 2 1 2 2 If You Have Selected City First 40 7 2 1 3 To Enter a Destination from Intersection 43 7 2 1 3 1 If You Have Selected Street First 44 7 2 1 3 2 If You Have Selected City First 47 7 2 1 4 To Enter a Destination from Points of Interest 51 7 2 1 4 1 If You Have Selected Alphabetical 32 7 2 1 4 2 If You Have Selected Distance 54 7 2 1 5 To Enter a Destination from 56 8 Index 7 2 1 6 To Enter a Destination from 59 7 2 1 7 To Enter the Center of City to Find the Destination 61 7 2 1 7 1 If You Have Selected Alphabetical 63 7 2 1 7 2 If You Have Selected Distance 65 7 2 1 7 3 If You Have Selected List ALL
15. 1 tap to confirm 88 Figure 7 2 41 7 2 6 Setting Mode The GV 101 contains six setting modes To enter the main menu as shown in figure 7 2 42 tap e Figure 7 2 42 7 2 6 1 System Information Tapping information will present data on the total and free memory capacities Memory Free Total Remaining Overall CF Card Free Total CF remaining CF Overall PCB Version MANTA REV 3 PCB Version No Firmware Version 0 21 0 23 DEV2 Firmware Version No 89 7 2 6 2 Step 1 On the main menu tap a to show the setting screen Step 2 The power setting will appear as shown in figure 7 2 43 Figure 7 2 43 Figure 7 2 44 shows the o Figure 7 2 7 2 44 In figure 7 2 45 shows the screen saver setting For example if you tap on the empty box the system will shut down after 30 sec of inactivity 90 Figure 7 2 45 7 2 6 3 Backlight Adjustment Step 1 On the main menu select to enter the backlight setting Step 2 The backlight setting 15 shown figure 7 2 46 Figure 7 2 46 In figure 7 2 47 the backlight setting 1s adjusted to automatic light sensor The backlig gt Figure EE Figure 7 2 48 91 Once the desired setting 15 selected you can either tap to confirm or to cancel 7 2 6 4 Language Selection Step 1 7 On the main menu select to enter the language setup mode Step 2 The la
16. 2 5 0 DIOC DIA te aden vetet R 93 7 2 5 7 List All Calls the Incoming Calls 94 7 2 5 7 1 Adding Calls to the Phonebook 94 7 2 5 7 2 Deleting the Received and Missed Calls 97 218 723 Drect otn e eres 98 PRONE DOO Kucni ERR a E UM 99 7 2 5 8 1 Add A Number to the Phonebook 99 7 2 5 8 2 Edit A Number in the Phonebook 100 MOOO 102 7 2 6 1 System a 102 L 103 7 2 6 3 Backlight 104 7 2 6 4 Language Selection ccce 105 122 0 5 t 105 7 210 0 S CEE ED 106 8 1 Index Blue tooth HandsFree Installation S Ll 6 ideis 107 8 1 2 Blue tooth HandsFree Carkit Installation Optional 108 8 2 Index FM Transmitter Optional 5 2 CIC IO 8 2 2 FM Transmitter Installation eee 9 Troubleshooting 10 FCC is 1 Features and Specification 1 1 Features Complete car navigation solution in one box including car mount Touch panel LCD with 65000 colors Smart and easy Attach switch it on and go Large Function icons design for easy touched User Friendly keypad Clear
17. 21 E Figure 7 2 21 7 2 5 3 4 Adding Before the Setup Numbers There are some numbers that require adding a before dialing If you cannot dial out properly through the carkit 1t could be because some telephone providers require this number format The setup steps to correct this are shown below Select as shown in figure 7 2 22 Step 1 Figure 7 2 22 Step 2 This will display the dial prefix screen with the current setting of phone number add shown in figure 7 2 23 indicates is added automatically to the number setting After placing the number you desired tapping to complete the setting _ Figure 7 2 23 7 2 5 4 Answering Calls The available caller ID will identify the incoming calls as shown in figure 7 2 24 If you have associated an identifying image with the number this will be displayed along with the caller ID Tapping YES 4 will answer the call veg JOE 0933861155 Figure 7 2 24 7 2 5 5 Hanging Up the Calls 80 __ NO If you do not want to answer the call tapping No CS will refuse the connection 7 2 5 6 Direct Dialing When the GV 101 is connected to your mobile phone you can dial directly from the GV 101 without having to use the phone using the dial screen in the GV 101 The dialing process 15 shown in figure 7 2 25 After it is connected you can simply
18. 5 Power Connector Connect the external power connector by using car charger or AC Adaptor 6 Stereo Speaker each on the both sides Allow the MP3 and Voice Navigation through the two built in speakers 1 the front and back The Blue tooth Carkit also enables to substitute the speakers 7 Memory Card Slot SD The PC applications and map data can be stored and be used along with the CF memory card simultaneously Note GlobalView Application Software and Map must be on the same memory card before use 8 Memory Card Slot CF The PC applications and map data can be stored and be used along with the SD memory card simultaneously Note GlobalView Application Software and must be on the same memory card before use 9 Blue tooth Expansion Connector Blue tooth HandsFree Module Selective 10 System Reset Switch Press down the reset button to reset the system 11 Battery Cover Open the battery cover for new battery replacement 12 Car Mount Slots Attach the GV 101 holder to the memory slots 3 Download Software to Memory Card After inserted the flash memory card into the card reader execute the software application and map data through the PC system then store all of the applications and map data to the flash memory Step 1 Make sure the flash memory USB card reader is connected to PC and the memory card SD or CF is inserted Note GlobalView Application Software and Map
19. GV 101 User Manual ver 1 16 Eng r navigator Table of Content 1 Features and Specification TE AUS Sts dM 5 1 2 SDECIBCALPIOD alates dala 6 Sv 6 1257 eM MR 7 2 Introduction AEG ate shah 8 2 2 Detailed Hardware ouest to deett eae 9 3 Download Software to Memory nennen nnns 12 4 Download Map Data to tie Memory Card eee e e t e e tei eene 15 4 Europe Map to the Memory Card 4 1 1 Install Europe Map Loader 15 4 1 2 Upload Europe Map to the Memory Card 18 4 2 American Map to the Memory Card 4 2 1 Install American Map Loader 20 4 2 2 Upload American Map to the Memory Card 23 5 Setup GV 101 Car 5 1 Attach GV 101 and Car Holder on the 26 5 2 Removing the GV 101 with the Car Holder 27 5 3 Connecting the Car Cigarette Charger to the GV 101 27 23 4 Powering 2 sia 28 S4 T Powering the CRVSIOT O 29 29442 Powernng the CrV TOT Oficio Eoo isset 29 29 FLORE EPUM MM 29 29 O 3
20. NG F dit cance OB DENM SEE DAVOS DAVOS WOLFGSNG CH 64 7 2 1 12 Label Your Favorites Step 1 O gt Destinations and then Favourites Step 2 Select a destination Step 3 Edit M o and enter a label using the keypad Edit Favourites KANTONALES SPITAL APPENZELL 65 TRIESEN TRIESEM LI Edit uy 5 7 2 1 13 To Demo the Navigation Step 1 Press and hold your finger on the screen to show the option menu Tap and then place and hold the finger on the desired starting point to option menu 66 Step 3 HALDENSTRASSE 7 2 1 14 Use GPS Info Step 1 Tap amp j and then PS Info 67 UTC Time Location 2005 06 22 Lat 24 996532 03 51 28 Lon 121 48 4 Local Time Alt 112 2005 06 21 Speed 0 km h 19 51 28 Satellite 5 9 110 Cane gt BL P 7 2 2 Photo View the files on the GV 101 s memory cards are scanned searching for images Any pictures found will be displayed as thumbnails as shown in figure 7 2 1 On the image window tapping the t button shows the previous page tapping the button shows the n next page and uu the button will close the Photo View Figure 7 2 1 To show an image in full screen mode simply select the picture by tapping on it as shown in figure 7 2 2 and then tap on t
21. RAIN Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 3 Enter the house number and Enter House Number Valid Range 25 25 29 SCHWARZ STRASSLE Step 4 From the match list select the desired address 35 SCHWARZ STRASSLE PLANKEN LI 25 SCHWARZ STRASSLE SCHAAN LI Ma t Pw p to add this location to your Favorites List or 36 PLANKEN LI Step 7 Tap to set this location as your starting point and see the location on the map Panning Map Click on X to Return 1 Information If a large number of records are found by the Street First method the program will automatically revert to City First method 7 2 1 3 To Enter a Destination from Intersection Step 1 37 to enter the city name first 7 2 1 3 1 If You Selected Street First then follow the steps below Step 1 Enter the street name and M 38 Enter Street CASTELLWEG HALBERRUTI HURER STRASSE Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 2 Enter the name of the Cross Street and Enter 2nd Street BACHWEG ASTELLSTRASSE Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 3 From the match list select the desired intersection 39 5 BACHWEG ESCHEN NENDELM LI Step 4 EXIT 82 B
22. S LED If it is a SOLID green it means that GPS has not located its position A BLINKING green means it has located a fix POWER LED Please check if the Power LED is lit in orange Note if lit in red the battery 1s not fully charged If this 1s the case please charge the battery and the orange LED will start to blink 8 Please refer to the GV 101 LED status Please check if the Power LED 15 lit in orange Note 1f lit in red the battery 1s not fully charged If this 1s the case please charge the battery and the orange LED will start to blink GPS LED Ifit 15 a SOLID green it means that GPS has not located its position BLINKING green means it has located a fix POWER LED Please check if the Power LED 1 lit 1n orange If lit 1n red the battery 1s not fully charged If this 1s the case please charge the battery and the orange LED will start to blink 9 Please refer to 4 5 1 with section entitled Soft Reset and follow the steps accordingly If this doesn t solve the problem continue onto Step 5 10 Please refer to Hard Reset under 4 5 2 Performing a Hard Reset should solve the majority of problems When the GPS cannot locate a fix 3 Confirm the GPS LED is lit in Green If it s a SOLID green it means that GPS has not located its position A BLINKING green means it has located a fix 4 Please test the unit in the outdoor field beginning with Step 1 When the GPS Status Display is shown incorrectly in GPSinfo
23. Shieldf Wizard InstallShield Wizard Welcome to the InstallShield Wizard for Netropa IntelliM av Europe The Install5 hieldA Wizard wall install Metrapa IntelliM av Europe on your computer continue click Next Cancel Step 4 Click Yes on License Agreement Installshield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN kep to see the rest of the agreement END USER LICENSE AGREEMENT The mapping and navigation software Software and map data Data i provided for our personal intemal use only and not for resale tis protected by copyright and is subject to the following terms and conditions which are agreed to by vou on the one hand and Globalsat LICENSEE and its licensors including their licensors and suppliers on the other hand If vau not agree to the terms of this agreement promptly exit the install program do not install the Software and or Data our rights under this License will terminate automatically without notice iF you Fall to comply with any tern s of the License Do you accept all the terms of the preceding License Agreement IF you choose the setup will close To install Netropa Inteli av Europe you must accept this agreement InstallShield Step 5 Click Next on the Select Components Installshield Wizard Select Components Select components
24. UCHS GRABS A mm EE DEST 500 R 1 6 2 mi Step 5 Fav Tap E to add this location to your Favorites List or TR BETTE Fac dd Favourites kr ue vum nek 40 Step 6 to set this location as your starting point and see the location on the map Panning Map Click on X to Return 7 2 1 3 2 If You Selected City First then follow the steps below Step 1 T Enter the name of the city and M o Enter City Mame S ELDIS EULDEN IDERIS IDERIS STATION Step 3 Enter the street name and tap EN 41 Enter Street Name Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 4 Enter the name of the Cross Street and Enter 2nd Street CHILCHGASSA IR CHGASSE Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 5 From the match list select the desired intersection 42 34554 FARA ae n n m CH Step 6 EXIT 9 ADU ia iom W DEST 22mi Step 7 dd 10 eu 43 Step 8 ii Panning Click on X to Return to set this location as your starting point and see the location on the map FAR An G TS ae d 1 Information If a large number of records are found by the Street First method the program will automatically revert
25. apable of connecting with up to five different mobile phones The example in figure 7 2 15 shows two mobile phones configured Figure 7 2 15 7 2 5 3 1 Adding and Deleting Phone Settings LS You can add a new mobile phone by tapping as shown in figure 7 2 5 2 2 If a phone is no longer required it be deleted by selecting the phone and tapping LA 7 2 5 3 2 Connecting to a Phone You need to manually select which of the configured mobile phones is the active one by following these steps 76 Step 1 Select the required mobile phone from the paired phones as shown in figure 7 2 16 For example select T610 then tap to make the connection as shown in figure 7 2 17 B BE Ji Figure 72 17 Step 2 If the connection is successful it will show in the window indicating that the connection between carkit and the mobile phone is active as shown in photo 7 2 18 77 Sa Figure 7 2 18 7 2 5 3 3 Disconnecting the Mobile Phone To disconnect the phone follow the steps below Step 1 Select the icon as shown in figure 7 2 19 Figure 7 2 19 Step 2 Enter the configuration screen as shown in figure 7 2 20 You can see the current mobile ay connection is T610 then tap to disconnect tt 78 Figure 12 2 Step 3 After disconnecting the icon will change to e indicating that the phone has been disconnected as shown in figure 7 2
26. atus Standby flash once every 3 seconds Connecting flash twice every 3 seconds Under Connection flash three times every 3 seconds Talking flash four times every 3 seconds 4 Please check to see 1f the blue tooth LED is functioning normally When the Map Data is not showing in the GV 101 In some cities 1f the map is not displayed on the monitor it may be because it has not been downloaded into the memory card Please refer to Ch 5 in the user manual for map upgrade FCC Notices This device complies with part 15 of the rules Operation 15 subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation FCC RF Exposure requirements This device and its antenna s must not be co located or operation in conjunction with any other antenna or transmitter NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS 100 EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY OPERATE THE EQUIPMENT 101 8 Trouble Shooting If the GV 101 did not boot up successfully or does not function properly 6 Please refer to Ch 2 to see if the SD card 1s properly installed the GlobalView software 7 Please refer the GV 101 LED status to confirm the SD memory card 15 inserted into the SD expansion slot GP
27. ction Arrow Mext turn movement Car Cursor Menu Button Trip Information 7 2 1 1 4 GPS Status Display 30 Location ll Lat 24 996532 Latitude Time 121 487694E Longitude Local Time 112 m 2005 06 21 Speed 0 km h 18 51 28 Satellite 5 9 _ Altitude speed Exit Button 7 2 1 2 Selecting Your Destination from Street First Step 1 MSE to enter the city name first Input L 7 2 1 2 1 If You Have Selected Street First follow the steps below Step 1 Cik Enter street name and 31 Enter Street PADRUSWEG PAFADER PAFADER WEG PAGUGGIWEG 1 Advisory DO NOT ENTER STREET TYPE For Main Street just enter Main Step 2 Enter the house number and M o Enter House Number Valid Range 2 41 2 PADER GROSS Step 3 From the match list select the desired address 32 2 PADERGROSS BALZERS BALZERS LI Step 4 EXIT 9 ADU ia iom W DEST 7 6 mi Step 5 dd 10 egs 33 Step 6 to set this location as your starting point and see the location on the map 7 2 1 2 2 If You Selected City First then follow the steps below Step 1 Enter city name and M City PAGRUEG PASPELS PFAFERS Step 2 Enter the street name and 34 Enter Steet Name SCHWARZ STRASSLE NTERM
28. e other hand IF vou do not agree ta the terms of this agreement promptly exit the install program do not install the Software and or Data rights under this License will terminate automatically without notice if you Fall bo comply with any term 3 of the License Do vou accept all the terms of the preceding License Agreement IF you choose the setup will close install Netropa Inteli av Europe must accept this agreement InstallShield Step 5 Click Next on the Select Components 17 Installshield Wizard Select Components Select components to install 16073 Destination Folder C Program Files Netropa inteliNay Europe InstallShield Step 6 Click Finish to finish installing Installshield Wizard InstallShield Wizard Complete Setup has finished installing Intelli a Europe on your Computer 4 2 2 Upload American Map to the Memory Card Step 1 18 E EIUS Click the icon of Desktop and click OK on the welcome menu Netropa Map Loader Welkome to the Netropa Loader WARNING If you do not have a storage card or have les than 64 of storage space available we recommend using the Cibr Radius method Click the By City tab in the upper left portion of the map loader window to choose this method If you have storage card with at lea
29. he button as the enlarged image is shown in figure 7 2 3 68 Figure 7 2 3 7 2 3 Movie Playback Overview The movie on the GV 101 can be played back from either of the memory cards The supported movie files must be encoded AVI Divx 3 11 and mpg format The GV 101 has a full function media player which has play pause forward and rewind functions in the movie player control as shown in figure 7 2 4 3 Tap to take you back to the ss 5 10 system menu Figure 7 2 4 Movie Display Tap e to open and select the required files to play in the movie display as shown in figure 7 2 5a r A to go back to the main movie display control Figure 7 2 5a Tapping w allows you to play the movie whereas rapping will stop playing Owe Figure 7 2 5b 7 2 4 MP3 Player Overview 70 The GV 101 scans the memory cards for MP3 audio recordings Play lists can be created from the audio files All the songs are played sequentially from a play list 7 2 4 1 Creating a Play List Step 1 Tap on the main player control after you have selected Music the result will be shown as in figure 7 2 6 Then tap 44 to show the play list as shown in figure 7 2 7 Figure 7 2 6 Step 2 When you open the play list the system will look for the MP3 files and create a play list from SD or CF memory card You can easily tap for the previous page or 5 for the next page as shown
30. in figure 7 2 7 01 my heart will go on 02 without you mp3 03 there you ll be mp3 Figure 7 2 7 Step 3 During the creation of the play list you can tap to add more songs Your new selections 71 will be added to the play list and the name will be shown in red c to delete the selected song NS to cancel all the display songs Tap Gu to select all and tapping e will go back to MP3 Player Control as shown in figure 7 2 8 Figure 7 2 8 7 2 4 2 Basic Operation Figure 7 2 9 Play the Created Play List After you have created a play list the GV 101 has normal playback features Tapping allows you to play the music from the play list whereas tapping a the music but tap twice or to assume playing from the S point Tapping will stop playing If you want to skip 2 song tap E 7 or to take you to either the previous or the next songs Change the Playback Mode of the Play List There are two modes of playback sequential and random Tapping will change the 12 songs to play randomly from the play list When this occurs button wy will appear which will change back to play sequential mode Normally the player will stop at the end of the list You can select repeat mode to continually replay the play list Tapping enables the repeat mode If you tap this will cancel the repeat mode as shown in figure 7 2 9 7 2 4
31. kj Copying File 5 of 16 bin wil Overall Progress uen 4 2 American Map to the Memory Card 4 2 1 Install American Map Loader Software Step 1 Make sure the flash memory USB card reader 15 connected to PC and the system memory card is inserted Note GlobalView Application Software and Map must be on the same memory card before use Step 2 Insert the GlobalView American Map Loader CD1 into the CD ROM and then run the CD ROM driver setup setup exe Then show the Choose Setup Language window and click OK Step 3 Click Next on the InstallShieldf Wizard 16 Installshield Wizard Welcome to the InstallShield Wizard for Netropa IntelliM av Europe The Install5 hieldA Wizard wall install Metrapa IntelliM av Europe on your computer continue click Next Step 4 Click Yes on the License Agreement Installshield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest af the agreement END USER LICENSE AGREEMENT The mapping and navigation software Software and map data D ata is provided for your personal internal use only and not for resale t is protected by copyright and is subject to the following terms and conditions which are agreed to by you on the ane hand and Globalsat LICENSEE and its licensors including their licensors and suppliers an th
32. n figure 7 2 33 and proceed dialing as shown in figure 7 2 34 0282 Figure 7 2 34 7 2 5 8 Phonebook The carkit contains phonebook facility allowing you to add delete edit dial entries 7 2 5 8 1 Add a Number to the Phonebook Step 1 85 e to insert new information in the phonebook as shown in step 7 2 5 7 1 for instructions Figure 7 2 35 Step 2 After Step 1 1s finished it will appear as shown in figure 7 2 36 7 2 5 8 2 Edit a Number in the Phonebook Step 1 Select a number you desire to be edited then tap A to enter the editing menu 86 83413576 _ 0282271714 Figure 7 2 37 Step 2 In the editing menu select the icon as shown in figure 7 2 38 tome mr gt 0282271714 Figure 7 2 38 Step 3 Open the editing menu as shown in figure 7 2 39 You can easily insert the names of your desire by using the keyboard After inputting the data you can either tap to confirm or to cancel 87 Figure 7 2 39 Step 4 If selecting the key as shown in figure 7 2 38 the photo selections will appear in the setting as shown in figure 7 2 40 You can select one of the images and tap to confirm 2004 01 01 13 034 0001 pictOO02 pg pictO003 ipg pictOO04 jpg pictOO005 pg Figure 7 2 40 Step 5 After the editing is completed as shown in figure 7 2 4
33. nguage setting appears as in figure 7 2 49 For example for Dutch you can easily pull down from the language selections then either tap v to confirm or to cancel Figure 7 2 49 7 2 6 5 About This setting will show the language selection version 7 2 6 6 Screen Correction This setting will show the screen correction 92 Step 1 On the main menu tap show the setting Step 2 Using the stylus tap on the cross in the middle of the screen as shown figure 3 5 1 Please see step 3 6 for complete instructions Carefully press and briefy hold stylus the center of the target Repeat as the target moves around the screen zz Figure 3 5 1 8 Index 8 1 Index A Blue tooth HandsFree Carkit Installation 8 1 1 Introduction Blue tooth HandsFree CarKit 15 an external connector Once installed to the GV 101 it will become a blue tooth handsfree car phone enabling you to make and receive calls without touching the mobile phone as shown in figure 8 1 5 Figure 8 1 6 shows the complete set Blue tooth LED Status Standby flash once every 3 seconds Connecting flash twice every 3 seconds Under Connection flash three times every 3 seconds Talking flash four times every 3 seconds Blue LED status inside Figure 8 1 5 93 Blue tooth HandsFree Module External Microphone Figure 8 1 6 8 1 2 Blue tooth HandsFree Carkit Installation Optional Step 1 Figure 8 1 7 sho
34. st of storage space available we recommend selectmg map areas by Region Click the Ev Region tab in the upper left portion of the map loader window to choose this method Step 2 Choose both a country and the CD ROM for download then By Region By City Region s yo Tie dz 1 MISC 1 Devig p m n UN LEE WELL 99 atores 1 L u on T 1 EI L am select All Clear All Available Space 164 Selected Size 22 Target Location Cenerate Step 3 The download the map data is now running and storing into the flash memory card 19 20 5 Setup GV 101 in Car 5 1 Attach GV 101 and Car Holder on the Car Step 1 Attach the car holder to the card slot in the back of the device by following the red arrow shown in figure 5 1 and in figure 5 2 after it is completed Figure 5 1 Figure 5 2 Step 2 Attach the car holder to the card slot on the bottom of the device by following the red arrow shown in figure 5 3 and in figure 5 4 after it is completed Figure 5 3 Figure 5 4 Step 3 Attach the suction mount 1 to the windshield and have the base 2 of the device stabilizes on the dashboard as shown in figure 5 5 21 Figure 5 5 5 2 Removing the GV 101 from the Car Holder To remove the GV 101 from the car mount place two fingers 1n
35. talk to the other person through the external microphone and built in speakers Figure 7 2 25 7 2 5 7 Listing the Incoming Calls calls are automatically stored after incoming calls Numbers can either be saved in the phonebook deleted or dialed directly without having to be saved as shown in figure 7 2 26 Figure 7 2 26 7 2 5 7 1 Adding Calls to the Phonebook 81 Step 1 Mi On the main menu tap the a key as shown as in figure 7 2 27 Then select one of the numbers and tap e key to enter it to the phonebook 0282271714 Figure 7 2 27 Step 2 In the editing menu select column to enter the associated name as shown in figure 7 2 28 Figure 7 2 28 Step 3 When the input box appears on the top of the screen enter the name as shown in figure 82 Figure 7 2 29 Step 4 Edit Tap open the image files Select a file from the list and tap to confirm as shown in figure 7 2 30 2004 01 01 13 03 0001 pictOO002 pg pictOO003 pg pictOO004 jpg pictOO005 pg Figure 7 2 30 83 Step 5 After it is finished tap to complete the setting as shown in figure 7 2 31 Figure 7 2 31 7 2 5 7 2 Deleting All the Received and Missed Calls Tap e to delete all calls as shown in figure 7 2 32 Figure 7 2 32 7 2 5 7 3 Direct Dialing from the Call Log 94 Select phone number as shown i
36. the position shown by the red arrows figure 5 6 and squeeze them together Slide the holder downward in the direction of the red arrow shown in figure 5 7 Figure 5 6 Figure 5 7 5 3 Connecting the Car Cigarette Charger to the GV 101 Connect the car cigarette charger small plug to the right side of the device in the power in socket and then insert the other end of the car charger to the vehicle s car accessory socket as shown in figure 5 8 22 cigarette car charger Global E 4 Figure 5 8 5 4 Powering the GV 101 On and Off GlobalView Sm STG MILL RD Power button 55 E ER T 1 L Em L WYOMING MILL RI GV 707 gt 01 LAR NAVIGATOR Figure 5 9 5 41 Powering the GV 101 Off When 101 is on press the power button once It will automatically close any open windows and enter a power saving mode 29 5 4 2 Powering the 101 When 101 is in the standby mode press the power button once It will automatically turn back up to its normal operating state Note Do not intend to turn the device on and off repeatedly for any technical problems that might occur during the operation 5 5 Reset Should your GV 101 encounter an unexpected error or if it locks up then the unit can be reset There are two types of reset a hard reset and a soft reset The reset switch is shown in figure 5 10 you will need to use a stylus or pencil to activate the reset b
37. tware and Maps Memory Card Optional CD ROM with maps for Europe or North America SD CF card download the maps data from PC CD ROM via the card reader optional Solutions Car Navigation Mp3 Player Movie Playback AVI Divx 3 11 Function Photo View Carkit Blue tooth HandsFree Languages Available in English German French Italian Spanish and Dutch 2 Introduction 2 1 Overview Global View HARRING CHR CIS 1 0 G i GV TOT CAR NAVIGATOR Figure 1 1 Global View WYO MING MILL RD E i or 00 WYOMING MILL RD GV 107 CAR NAVIGATOR Figure 1 2 gt 10 11 12 Figure 1 3 2 2 Detailed Hardware Functions 1 Status Indicators GPS LED If it is a SOLID green it means that GPS has not located its position A BLINKING green means it has located a fix POWER LED Please check if the Power LED 1s lit in orange If lit in red the battery 15 not fully charged If this 15 the case please charge the battery and the orange LED will start to blink 2 Power Button Turn it on and then turn it off again 3 Main Control Buttons gD a Zoom Out Car Navigation Only 8 b Zoom In Car Navigation Only c Volume Down d Volume Up e Mute f Set Destination Car Navigation Only g Main Menu 4 USB Interface Connector Enable to insert FM transmitter to deliver the quality of sound to car speakers
38. ulation Turns Select whether the turns is more or less Tap ES to accept or 7 2 1 9 To Set the Region Options Step 1 and then Fes to reject changes to open the Region Options Screen 61 i Localisation TimeZone OMT Cancel Step 2 Select the desired options Step 3 Time Zone Choose to use the sunlight time or current time zone setting Units Choose different units and change EN Tap to accept or to reject changes 7 2 1 10 To Set the Display Options Step 1 and then Pisplay Opts to open the Display Options Screen 62 Step 2 Select the desired option s Step 3 Map Orientation Orient the Map Screen so that the driving direction 15 pointing up or North is pointing up Color Scheme Set color scheme to Day or Night mode Auto setting changes from Day to Night mode automatically at approximately sunrise and sunset Guidance Screen Set the Guidance Screen to automatically switch when getting closer to a turn maneuver or have it appear only when manually selected POI Icons You can select the Default or Custom or Off 3D VIEW Users can choose to use 2D or 3D mode for navigation ER Tap to accept or to reject change s 7 2 1 11 To Create or Add to the Favorites List Step 1 Step 2 Select a recent destination 63 OB SEE DAVOS DAVOS WOLFGSNG CH DAVOS DAVOS WOLFGA
39. utton Reset Button Figure 5 10 5 5 1 Soft Reset Press the Reset Button as shown in figure 5 10 This will restart the system retaining all the information stored on the device 5 5 2 Hard Reset A hard reset will re initialize the GV 101 back to the factory settings You should not need to use this under normal operating conditions To start a hard reset you need to press and hold the reset button as shown in figure 5 10 meanwhile pressing down the power switch as shown in figure 5 9 Note A hard reset will delete some of the information stored on the device and revert to its original factory settings All data stored on the memory card such as music files and phone book in the carkit will be retained 24 5 6 Screen Alignment When the system has been hard reset the screen needs to be aligned before it can be used This will start automatically Step 1 Using the stylus tap on the cross in the middle of the screen as shown in figure 3 11 Carefully press and briefy hold stylus an the center of the target Repeat as the target moves around the screen zz Figure 5 11 Step 1 The cross will now move to the upper left corner Tap it in the center again Repeat this for the remaining 3 corners as it shown in figure 5 12 Io press and briefly hold stylus on the center of the target Repeat as the target moves around the screen Figure 5 12 Step 3 When the screen has been aligned successfully it will be
40. ws the external microphone that connects to the audio output on the handsfree module Figure 8 1 8 shows it correctly plugged __ Figure 8 1 7 Figure 8 1 8 Step 3 94 Insert the blue tooth carkit in the GV 101 s expansion slot as shown in figure 8 1 9 Figure 8 1 9 Step 4 Mount the microphone on the dashboard using the double sided tape Figure 8 1 10 shows that the microphone which has to face the user microphone has to face against the user Figure 8 1 10 Step 5 You can place the handsfree carkit in the car as shown in figure 8 1 11 1 Blue tooth HandsFree Carkit Module 2 The Microphone on the Dashboard 95 Globa View Figure 8 1 11 8 2 Index B FM Transmitter Optional 8 2 1 Introduction The GV 101 can use an FM Transmitter as an optional accessory The main purpose for the FM Transmitter is to adapt the wireless channels from voice source to the FM wireless frequency Simply apply this option by using your FM radio in the car to hear the voice from your car speakers There are two parts shown in figure 8 2 1 one is the FM Stereo Transmitter converter and the other one 15 the Audio Adaptor Lead 96 audio adapter lead FH Stereo Transmitter Figure 8 2 1 8 2 2 FM Transmitter Installation Step 1 Connect the FM Stereo Transmitter to the USB of the device and then insert one end of the audio adapter lead to the back of the FM Stereo Transmitter Socket
41. x 7 2 1 14 Use GPS Info 1 2 Please refer to 7 2 1 14 Info regarding the Status Indicators Confirm the GPS LED 1s lit in Green If it s a SOLID green it means that GPS has not located its position A BLINKING green means it has located a fix Please test the unit in the outdoor field beginning with Step 1 When the GPS Status Display is shown incorrectly in GPSinfo Please refer to Ch 2 2 Section 2 of the user manual under the heading Status Display If GPSinfo indicates the incorrect time please check the Status Indicator of Ch 2 2 to see if it shows the GPS LED 1s in BLINKING green or not If it s in SOLID green it means GPS has not found its fix yet Ifthe GPS has found its fix but the time display 1 still incorrect please refer to Ch 7 2 1 9 of the user manual Go to To Set the Region Options and adjust the Time Zone setting When the battery light turns red A red light indicates the battery requires charging An orange light blinks when it s charging and solid when it 1s fully charged When the HandsFree operation cannot be executed 99 1 Please refer to Ch 2 2 Section 9 to make sure the HandsFree Carkit Module is properly installed 2 Ifnot please refer to Index A Blue tooth HandsFree Carkit Installation 1 the user manual to install the application 3 After the HandsFree Carkit Module is fully installed please refer to Ch 8 1 1 of the user manual for the blue tooth LED St

GV-101 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents