Home

P INT SPY INT P SPY

1. Wireless On Off Enables or disables the wireless transmission of photos to the BLACKBOX receiver TINY W to the BLACKBOX D controller TINY PLUS TINY W or to the BLACKBOX 4G controller TINY PLUS TINY When the transmission is enabled e Only photos are transmitted to the receiver and to the controller not videos e The quality of the photos recorded on the receiver and the controller is reduced to maximize transmission 8 or 10MP 800 x 600 pixels SMP 640 x 480 pixels SMP 320 x 240 pixels e When the TIME LAPSE mode is enabled the photos are sent to the receiver and to the controller except for the 30s setting e When the delay setting 10s is selected the time between each detection is calculated when the transmission is completed For example if the transmission takes two seconds the time between the two detections is 12 seconds Note When the Wireless option is activated it is only possible to take up to 2 consecutive shots TINY PLUS TINY W TINY Delay 10s 1m 3m 5m 10m 15m 30m Allows the user to choose the time interval between each detection before the camera records the next photo or video A longer delay minimize the number of photos taken and maximize the battery life A shorter delay maximize the number of photos taken but requires more battery power The shorter times interval are recommended when the cameras is used for security purposes Additional setti
2. signal is too weak Bring closer or move the controller If the icon t of the wireless signal is green and stays green for more than 10 A seconds the signal is strong enough and stable to enable wire less transmission of photos to the controller Note The message Waiting for camera appears on the screen of the BLACKBOX D if the controller is not synchronized with the camera or if the wrong camera ID is selected Live view Allows a live preview of the field of view of the camera in real time 1 photo per second is sent to the controller Press the BACK button to return to the previous menu A This mode requires more battery power Note The preview can also be on a TV using the TV OUT port of the controller see View section p 26 26 VIEW Allows the user to view or delete the recorded photos on the controller screen or on a television e Viewing with the screen of the controller When VIEW mode is selected choose the name of the desired camera and press OK The last recorded photo automatically appears on the screen Press lt or gt to view the next or previous Press OK to view the different options available Date and time To view the date and time printed on the photo Protect Allows the user to protect the photo to prevent it from being deleted by selecting Delete All Delete Allows the user to erase from the memory card the photo seen on the screen Delete all Allows the
3. H x 1 9 D Wireless range Maximum 500 ft 150 m from camera to BLACKBOX D controller supplied with TINY W Recommendations Operating temperature 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C CAMERA Photo recording Photo resolution 3 MP 5 MP 10 MP File format JPG Time lapse mode Predefined intervals from 30 sto 1 h Multi shot mode Up to 6 photos per detection Stamp only on photos Date time temperature C F and moon phase Capture mode Color by day black and white by night Video recording Video resolution 640 x 480 1280 x 720 File format AVI Sequence length Capture mode Adjustable from 10 to 90 s Color by day black and white by night Sound recording Automatically recorded in video mode Mono Memory storage Support e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Computer output USB 2 0 Power source Accessories sold separately p 41 Alkaline or lithium batteries 6 x AA Lithium battery pack Rechargeable battery pack LIT 09 LIT C 8 External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V 51 Solar panel Solar panel SP 12V combined with rechargeable battery pack LIT 09 LIT C 8 Dete
4. an ja ls Ea lukk H lla aaa a Hk H 4 Components Es 17215 A VI S TE NR ean manecuia 5 Receiver BLACKBOX siss as E a a rii 7 Controller BLACKBOX D ccccccccesssscceueceetceeeeeueeseeueeeueeeteeuceuteeneuugenns 8 Controller BLACK BOX 46G aaa l ska i s HN Raka aaa aka ka 9 Power Caio Rr 10 Receiver BLACKBOX ssccncaciesvadeciestasntintaes canes a R Rl R k 11 Controller BLACKBOX D BLACKBOX 4GY 4uuaaavanasnsnannnnnnnnanannnnnannnnnnanannaa 12 Memory card SEI eh E E E PTEE arenes E E E A A O E OET 14 Receiver BLACKBOX va v G RRR a a 15 Controller BLACKBOX D BLACKBOX 4GYs4uuaaavanasnsnannnnnnnnnnannnannnnnnnnananaa 16 SIM card Controller BLACKBOX 4G ii 16 BUSY LED CS NG sep I a nanueoauee 14 Controller BLACKBOX D BLACKBOX 4G cssecccuuueeeeeceueuueeseeuuuueeneneags 16 Antenna installation TINY PLUS 2 saasavassss sasa anannananananaaana 14 Settings or gn sr 17 Setup Receiver BLACKBOX sasssa nanana 23 Controller BLACKBOX D 00 41 25 Controller BLACK BOX 46 tina tis s 28 REMOS Technology TINY 000000 eee eeeeeeeeeeeeeeeeeeeeeeeseeeenaaaes 22 Sound recording camera saaaasavasasns sannanannanannannanannnnannnai 33 External triggering camera asaassanssssssannannannannannannannnana 33 File transfer to a computer Cali Cl E r r 34 Receiver BLACKBOX Ja nia board ari Vi na R 35 Controller BLACKBOX D BLACKBOX 4G 0000 35 Troubleshooti
5. photos already recorded REMOVING THE MEMORY CARD Lightly press the memory card into the receiver once to pop it out of the slot and remove it 15 MEMORY CARD A memory card is required to operate the controller The controller is compatible with SD SDHC memory cards up to 32 GB capacity sold separately p 44 BLACKBOX D When the controller s memory card is full the transmission and recording of photos continue by clearing the first recorded photos on the memory card When the START BLACKBOX option is selected and no memory card is used the screen indicates to insert a memory card The BLACKBOX D controller also beeps When the SD card is full the screen displays Memory card full Here is a table of the approximate number of photos that can be recorded with different memory card capacities Photo 20500 41000 82000 164000 17000 34000 68000 136500 10 MP 9500 19000 38000 76000 INSERTING THE MEMORY CARD BLACKBOX D BLACKBOX 4G Insert a SD SDHC memory card up to 32 GB capacity in the card slot The card is inserted correctly when a click is heard Before inserting or removing a memory card always turn off the controller to prevent loss or damage of the photos already recorded 16 REMOVING THE MEMORY CARD Lightly press the memory card into the controller once to pop it out of the slot and remove it INSERTING THE SIM CARD BLACKBOX 4G Carefully insert a SIM card in the card slot gold contact
6. time temperature C F and moon phase Capture mode Color by day black and white by night Video recording Video resolution 640 x 480 1280 x 720 File format AVI Sequence length Adjustable from 10 to 90 s Capture mode Color by day black and white by night Sound recording Automatically recorded in video mode Mono O o Memory storage Support Viewing e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Computer output USB 2 0 Power source Accessories sold separately p 41 Alkaline or lithium batteries Lithium battery pack External 12V jack Solar panel 6 x AA Rechargeable battery pack LIT 09 LIT C 8 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V Solar panel SP 12V combined with rechargeable battery pack LIT 09 LIT C 8 45 Detection system Motion sensor PIR Detection angle of the main 30 sensor Detection angle of the side 70 sensors Detection range Adjustable from 5 to 65 ft Delay between each detection Adjustable from 1 to 30 min Additional 10 s setting Electricity option Instant trigger time Connection to an electrical outlet only External trigger Night time illumination system 1 8 jack for normally open contact LEDs 38 LEDs Type Invisible LEDs Exposure
7. 09 LIT C 8 Detection system Motion sensor PIR Detection angle of the main 30 sensor Detection angle of the side 70 sensors Detection range Adjustable from 5 to 65 ft Delay between each detection Adjustable from 1 to 30 min Additional 10 s setting Electricity option Instant trigger time Connection to an electrical only outlet External trigger Night time illumination system 1 8 jack for normally open contact LEDs 38 LEDs Type Invisible LEDs Exposure Automatic infrared level adjustment Optical field of view 40 4 7 W x 3 5 H x 2 7 D Wireless range Recommendations Operating temperature Maximum 500 ft to the BLACKBOX D controller supplied with TINY W3 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C BLACKBOX D CONTROLLER Memory storage Support e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Power source Accessories sold separately p 44 Alkaline or lithium batteries 6 x AA Lithium battery pack Rechargeable battery pack LIT 09 LIT C 8 External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V Solar panel Solar panel SP 12V combined with rechargeable battery pack LIT 09 LIT C 8 3 9 W x 4 7
8. Side sensors 2 Fresnel lens Light sensor Cable lock hole Tripod mount Slot for installation strap E Power button BUSY LED Navigation buttons Viewing screen Microphone Battery switch Access to the time battery SD card slot 19 Removable battery holder USB port 21 12V Solar panel jack External trigger jack TV out 16 Battery switch Allows the user to select the power source according to the type of batteries used p 10 17 Access to the time Battery that keeps the time and date in battery memory p 10 18 SD card slot An SD card is required to record photos videos p 14 19 Removable battery Holder for AA batteries or a rechargeable holder lithium battery pack p 10 20 USB port To transfer photos videos to a computer p 34 21 1 12V power jack 1 This camera can be powered from an external 12 volt DC input such as a 12V 2 Solar panel jack battery or a 12V adapter each sold sepa rately p 10 2 Allows the user to connect a solar panel SP 12V to maintain the charge of the lithium battery pack LIT 09 LIT C 8 sold separately p 10 22 External trigger jack 1 8 port which triggers the taking of pho tos or videos using a normally open contact Example using a magnetic door contact connected to an alarm system p 33 23 TV OUT Allows the user to view or delete p
9. area facing up Before inserting or removing a SIM card always turn off the controller REMOVING THE SIM CARD BLACKBOX 4G Use pliers to gently remove the SIM card from the controller lt BUSY gt DEL BLACKBOX D The BUSY light located above the screen lights up when the controller records a file lt BUSY gt DEL BLACKBOX 4G The BUSY light located above the screen lights up when the controller records a file transfer photos or searches for the cellular signal Use the and buttons to navigate in the interface and modify the selection the OK button to select and the 9 button to return to the previous menu o PHOTO Allows the user to take photos When the PHOTO mode is selected the test light in front of the camera will flash for 60 seconds to allow the user to leave the area without being photographed cx VIDEO Allows the user to take videos When the VIDEO mode is selected the test light in front of the camera will flash for 60 seconds to allow the user to leave the area without being recorded TEST F Allows the user to test the detection system of the camera When TEST mode is selected no photo or video is recorded Walk perpendicu larly in front of the camera When the camera detects a movement the light blinks to indicate that normally a photo or video would have been recorded If the system does not detect the movement increase the detection distance using the Sensitivity option in
10. at 00 00 Phone 18007797646 An MMS plan is required available from a compatible cellular service provider Activation procedure available at spypoint com activation Email mode The controller communicates by email to update its status or to send photos When the Email mode is selected up to 5 different email addresses can be entered Notifications will be sent to these email adresses To add or modify an email address e Select the desired line and press OK e Use to select the letters numbers and special characters on the electronic keyboard then press OK e When it is done select H and press OK Mode Email Synchronize 1 day Synchronize at 00 00 Email name domain com A data plan is required available from a cellular service provider Activation procedure available at spypoint com activation Device informations including the serial number SN the SIM card number SIM and the version number of the software It may take few seconds before the information is displayed The BLACKBOX 4G should also be in cellular mode MANAGE CAMERAS Allows the user to access to the list of options to manage the cameras syn chronized to the controller If more than one camera is synchronized to the controller choose the one that is to be changed with the lt and gt buttons To reach the group option in the upper right corner of the controller screen hold the gt button for 3 seconds Change group wit
11. depending on the power source Power source e GAA e 12V ALK e 12V 6AA e LIT 09 e 12V LIT 09 RECH e Solar panel LIT 09 Battery switch position Rechargeable lithium battery pack sold separately LIT 09 or with a charger LIT C 8 TIME BATTERY The camera has a CR2032 lithium button battery which saves the time and date To replace the battery 1 Turn off the camera and remove it from the housing 2 Using a flat screwdriver push the tab to the left 3 While pushing the tab to the left remove the compartment of the camera 4 Replace the battery the polarity must be respected side facing up It is possible to know the battery level of the receiver when it is turned on The TEST LIGHT stays on for 8 seconds when the batteries are full When the TEST LIGHT flashes for 8 seconds the batteries are low and need to be replaced If the TEST LIGHT remains off the batteries are completely empty or are possibly installed in the wrong direction AA BATTERIES The receiver requires 6 AA batteries 1 5V The use of alkaline or lithium batteries is strongly recommended Insert the batteries as indicated battery polarity must be followed Please note that the voltage of rechargeable AA bat teries 1 2V is insufficient to power the BLACKBOX 6 alkaline AA receiver We also recommend the use of new batteries to batteries ensure maximum performance of your device EXTERNAL 12V The
12. its receiver on a different channel Turn on the first camera and choose the SIGNAL mode CY Turn on the first BLACKBOX receiver Choose the Channel 1 option on the camera and press OK Use the T and buttons to select a channel and press OK Choose the Sync option on the camera and press OK The camera synchronizes with the powered receiver and the sync icon Sync goes from red to green when the synchronization is complete Om RW N Be N Turn off the camera and the corresponding receiver 8 Repeat these steps for each additional set up to 9 sets TINY W BLACK BOX receiver can be matched in a same perimeter of 250ft Note In the minute following turning on the receiver the test light of the receiver flashes The first 8 seconds allows the user to know the battery status p 11 Then for the rest of the time the test light flashes rapidly to indicate the synchronization period Note After a synchronization or when the test light turns off after 60 seconds the receiver can t be synchronized unless it is turned off and on again 24 BLACKBOX D AND CAMERA INSTALLATION The strength of the wireless signal varies depending on the orientation of the controller We strongly recommend installing the controller on the same side of the camera s antenna see figure below SIGNAL STRENGHT For best results the antennas of the two devices must also point upwards and their re
13. memory card into the camera once to pop it out of the slot and remove it BUSY DEL The BUSY light located beside the screen lights up when the camera records a file ANTENNA INSTALLATION TINY PLUS Remove the cap and screw the antenna on the side of the camera The antenna allows wireless commu nication between the camera and a controller The TINY PLUS camera can be added to the wireless sys tem TINY W composed of a TINY W camera and a BLACKBOX D controller and to the wireless system TINY composed of a TINY camera and a BLACK BOX 4G controller Up to 10 cameras can be com bined to a single controller MEMORY CARD A memory card is required to operate the BLACKBOX receiver The receiver is compatible with SD SDHC memory cards up to 32 GB capacity sold sep arately p 43 When the memory card of the receiver is full the transmission and recor ding of photos continue by clearing the first recorded photos on the memory card Here is a table of the approximate number of photos that can be recorded with different memory card capacities Photo sss 20500 41000 61500 82000 17000 34000 51000 68000 12000 24000 36000 48000 INSERTING THE MEMORY CARD Insert an SD SDHC memory card up to 32 GB capacity in the card slot gold contacts facing up The card is inser ted correctly when a click is heard Before inserting or removing a memory card always turn off the receiver to prevent loss or damage of the
14. photos are not transferred to the BLACKBOX Synchronise together the BLACKBOX and the camera before use p 24 Verify the quality of the wireless signal with the option Range Test p 23 Observe the maximum distance between the receiver and the camera 250 ft p 23 Install the latest update available for the receiver and the camera available on www spypoint com under SUPPORT section The BLACKBOX receiver does not synchronize with the TINY W F camera Bring closer the 2 devices p 23 Install the latest update available for the receiver and the camera available on www spypoint com under SUPPORT section The range test of wireless signal does not work Verify if the receiver is turned on Synchronise together the BLACKBOX and the camera before use p 24 Bring closer the 2 devices p 23 Verify if the two antennas BLACKBOX and camera are pointing up and they are placed approximately at the same height p 23 Install the receiver on the same side of the camera s antenna to have a stronger signal p 23 The device takes water Verify if the cover is tightly closed Verify if the rubber ring is correctly installed Clean the rubber ring 38 Possible solutions The use of a memory card is required to record photos com under SUPPORT section Replace alkaline batteries or recharge the lithium The controller cannot access the memory card e Turn off the contr
15. receiver can also be powered from an external 12 volt DC input such as a 12 volt battery KIT 12V BATT 12V or KIT6V 12V or a 12 volt adapter AD 12V each sold separately p 43 During the installation of a 12 volt connection the AA batteries can remain safely inside the receiver For available accessories see p 43 SOLAR PANEL The receiver can be powered with a 12 volt battery combined with a solar panel SP 12V sold separately p 43 to maintain the charge of the 12 volt battery sold separately p 43 11 The battery level is shown in the top right corner of the screen When a single line remains the controller will continue to receive photos but we strongly recommend to change the AA batteries or charge the lithium bat tery pack before they are empty AA BATTERIES The controller requires 6 AA batteries 1 5V The use of alkaline or lithium batteries is strongly recommended During the installation of the AA batte ries slide the battery switch to ALK i e alkaline Insert the batteries in the compartment as indicated Battery polarity must be followed H FEF JUL 6 alkaline AA batteries Please note that the voltage of rechargeable AA batteries 1 2V is insufficient to power the controller We also recommend the use of new batteries to ensure maximum performance of your device LITHIUM BATTERY PACK The controller can be powered by a rechargeable lithium battery pack LIT 09 LIT C 8 sold separately p 44 Thi
16. Automatic infrared level adjustment Optical field of view 4 7 W x 3 5 H x 2 7 D Recommendations Operating temperature 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C Photo recording Photo resolution 3 MP 5 MP 10 MP File format JPG Time lapse mode Predefined intervals from 30 sto 1 h Multi shot mode Up to 6 photos per detection Stamp only on photos Date time temperature C F and moon phase Capture mode Color by day black and white by night Video recording Video resolution 640 x 480 1280 x 720 File format AVI Sequence length Adjustable from 10 to 90 s Capture mode Color by day black and white by night Sound recording Automatically recorded in video mode Mono Memory storage Support Viewing e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Computer output USB 2 0 Power source Accessories sold separately p 41 Alkaline or lithium batteries Lithium battery pack External 12V jack Solar panel 6 x AA Rechargeable battery pack LIT 09 LIT C 8 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V Solar panel SP 12V combined with rechargeable battery pack LIT 09 LIT C 8 46 Detection system Motion
17. Mono Memory storage Support e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Computer output USB 2 0 Power source Accessories sold separately p 41 Alkaline or lithium batteries 6 x AA Lithium battery pack Rechargeable battery pack LIT 09 LIT C 8 External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V 47 Solar panel Solar panel SP 12V combined with rechargeable battery pack LIT 09 LIT C 8 Detection system Motion sensor PIR Detection angle of the main 30 sensor Detection angle of the side 70 Sensors Detection range Adjustable from 5 to 65 ft Delay between each detection Adjustable from 1 to 30 min Additional 10 s setting Electricity option External trigger Night time illumination system LEDs Type Exposure Optical field of view Instant trigger time Connection to an electrical only 1 8 jack for normally open contact outlet 38 LEDs Invisible LEDs Automatic infrared level adjustment 40 4 7 W x 3 5 H x 2 7 D Wireless range Maximum 250 ft Recommendations Operating temperature 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C BLACKBOX RECEIVER Memory storage Support e Internal me
18. P SPYRAN SURVEILLANCE CAMERA USER MANUAL TINY W BY TINY W TINY PLUS h TINY SPYRGANT THANK YOU FOR CHOOSING A SPYPOINT PRODUCT This manual will guide you through all the features of your device so that you will get optimal use out of your SPYPOINT product Our priority is to provide outstanding customer service If you need Support for your product please contact the SPYPOINT technical service or visit our website CONTACT a 1 888 779 7646 tech spypoint com q www spypoint com ABOUT US cm GG Telecom s mission is to offer products that are easy Jj to use innovative affordable and of exceptional quality Our SPYPOINT products are mainly used for hunting and residential commercial surveillance They are distributed and shipped all over the world and the market never stops growing Prosperous and respected GG Telecom is a company that constantly keeps abreast of new technologies and listens to its customers to deliver cutting edge products with practical solutions that improve hunting and outdoor activities JOIN THE SPYPOINT COMMUNITY f FACEBOOK COM SPYPOINT You YOUTUBE COM SPYPOINTTRAILCAM E2 TWITTER COM SPYPOINTCAMERA e If you need information or would like to subscribe to mySPYPOINT service go to www myspypoint com e For the latest version of the activation procedure go to Ssupport spypoint com activation I CAMERAS WITH CELLULAR TRANSMISSION Package contents skar
19. SP 12V Solar panel with adjus table steel mounting kit Maintains the charge of the lithium battery pack directly into compatible de vices Can also be combined with any 12 volt battery 9 ft power cable Rechargeable 12V battery amp charger set BATT 12V 12 volt 7 0Ah rechar geable battery and AC charger to power the receiver MEMORY CARD Rechargeable 12V battery charger amp housing kit KIT 12V 12 volt 7 0Ah rechar geable battery with a water resis tant ABS plastic case AC charger 12 ft power cable PW 12FT and carrying strap included Compa tible with all SPYPOINT products equipped with a 12V power jack SD Memory card 8GB SD 8GB SDHC memory card 8 GB High speed Class 6 Spare power cable PW 12FT Spare 12 ft power cable to connect the receiver to the KIT 12V 43 To obtain more information on the available accessories go to www spypoint com Here are the main accessories available POWER 12V DC Power cable CB 12FT 12 ft power cable with alligator clips at one end to connect a 12V battery to a controller X 12 volt Adaptor AD 12V AC adaptor 6V to 12V Powers the controller from an elec trical outlet Lithium battery pack LIT 09 Additional rechargeable lithium battery pack fits most SPYPOINT products Lithium battery pack amp charger LIT C 8 Rechargeable lithium battery pack and AC charger with charge indicator light Fits most SPYPOIN
20. T products sl Rechargeable 6V 12V battery charger amp housing kit KIT6V 12V Universal kit with two 6V rechargeable batteries 2 8Ah with 6V 5 6Ah and 12V 2 8Ah output configuration and AC charger Water resistant ABS plastic case 12 ft power cable and strap included Camo pattern Compatible with all SPYPOINT pro ducts equipped with a 12V power jack Rechargeable 12V battery amp charger set BATT 12V 12 volt 7 0Ah rechar geable battery and AC charger to power the controller Rechargeable 12V battery charger amp housing kit KIT 12V 12 volt 7 0Ah rechar geable battery with a water resis tant ABS plastic case AC charger 12 ft power cable PW 12FT and carrying strap included Compa tible with all SPYPOINT products equipped with a 12V power jack Spare power cable PW 12FT Spare 12 ft power cable to connect the controller to the KIT 12V MEMORY CARD SD Memory card 8GB SD 8GB SDHC memory card 8 GB High speed Class 6 Solar panel SP 12V Solar panel with adjus table steel mounting kit Maintains the charge of the lithium battery pack directly into compatible de vices Can also be combined with any 12 volt battery 9 ft power cable Photo recording Photo resolution 3 MP 5 MP 7 MP File format JPG Time lapse mode Predefined intervals from 30 sto 1 h Multi shot mode Up to 6 photos per detection Stamp only on photos Date
21. YPOINT camera We also recommend the use of new batteries to ensure maximum performance of the camera Insert connectors first Connectors Connectors 6 alkaline AA batteries Lithium battery pack LIT 09 LIT C 8 LITHIUM BATTERY PACK This SPYPOINT camera can be powered by a rechargeable lithium battery pack LIT 09 LIT C 8 sold separately p 41 This type of battery is less affected by cold temperatures and lasts up to 3 times longer than an alka line batteries During the installation of the lithium battery pack slide the battery switch to RECH Insert the battery in the removable battery holder and insert it inside the camera see figures above EXTERNAL 12V This camera can also be powered by an external 12 volt DC input such as a 12 volt battery KIT 12V BATT 12V or KIT6V 12V or a 12 volt adapter AD 12V each sold separately p 41 During the installation of a 12 volt connection slide the battery switch to ALK the AA batteries can remain Safely inside the camera If combined with a lithium battery pack slide the battery switch to RECH For available accessories see p 41 SOLAR PANEL This camera also offers the possibility to connect a solar panel SP 12V sold separately p 41 to maintain the charge of the lithium battery pack sold separately p 41 While installing the rechargeable lithium battery pack slide the battery switch to RECH to activate the charging system of the solar panel Battery switch position
22. ack Remote control TINY RC 1 Four button wireless remote control Works with all cameras compatible with REMOS technology up to 500 ft Battery included MEMORY CARD SD Memory card 8GB SD 8GB SDHC memory card 8 GB High speed Class 6 Solar panel SP 12V Solar panel with adjus table steel mounting kit Maintains the charge of the lithium battery pack directly into compatible de vices Can also be combined with any 12 volt battery 9 ft power cable Spare power cable PW 12FT Spare 12 ft power cable to connect the camera to the KIT 12V INSTALLATION AND SECURITY Cable lock CL 6FT 6 ft cable lock fits all SPYPOINT cameras Tripod TP CAM SPYPOINT Lightweight tripod in black aluminum with a unique anchor system and a re movable quick release plate Max height 4 9 ft 1 5 m min height 1 7 ft 0 5 m max load weight 11 Ibs 5 kg Fits most SPYPOINT products Camera mount MA 360 Adjustable mounting arm fits all cameras that have a standard 20 tripod mount It can rotate 360 and tilt approx 90 Also available in black Steel security box SB T Steel box to secure the ca mera against theft It also protects it from breakage caused by bears or other animals Fits SPYPOINT cameras of the TINY series Also available in black 42 INFRARED BOOSTER Invisible LEDs IR Booster IRB W B 100 invisible LEDs completely invisible to the na
23. amera is turned on The computer does not recognize the camera Verify if the camera is properly connected to the computer using the USB cable p 34 The computer can t play videos The MP4 video format requires the use of a video player software compatible such as VLC Windows Media Player or QuickTime Error message Possible solutions Insert memory The use of a memory card is required to record photos card and videos e Delete the files or use a new memory card Memory card full e Afterwards the Continuous option can be activated for a continuous recording p 19 The camera cannot access the memory card e Turn off the camera and turn it on again Card error e Remove the memory card and insert it again e Verify if the gold contacts are clean e Format the memory card Appears on the screen just before the camera turns Low battery off Recharge the batteries or insert new ones Always verify the battery level before using the camera There are no files to view Verify if the memory card No image contains photos videos It is impossible to delete the file because it is protected Protected file To delete this file and all the others just format the memory card 37 Problem Possible solutions Impossible e Verify if there are batteries in the receiver to turn on the e Verify if the batteries are correctly installed p 11 receiver e Replace alkaline batteries The
24. cted the controller screen turns off in order to preserve battery life To return to the main screen turn off the control ler and turn it on again E SETTINGS Allows the user to change the different settings of the controller To set the system to English press the or buttons until Language is high lighted Press OK select English with the or buttons and confirm the choice with OK The system will then change the menus to English The settings menu is presented as an interactive menu By selecting certain options it allows the display of other options Language English Frangais Allows the user to select a language for the controller menus Auto time Yes No The date and time are synchronized with the cellular network when avai lable and that the controller is set in CELLULAR mode gt When this option is disabled the Date and Time options appear Allows the user to set the date as Year Month Day Time Allows the user to set the time as Hour Minute Second Time format 12h 24h Allows the user to select the time display over a period of 12 or 24 hours on the photos e g 6 00 pm or 18 00 Camera mode Standalone Cellular Allows the user to select the operating mode of the controller When the Standalone mode is activated The controller receives the photos from the camera and saves it on its memory card When the Cellular mode is activated The controll
25. ction system Motion sensor PIR Detection angle of the main 30 sensor Detection angle of the side 70 sensors Detection range Adjustable from 5 to 65 ft Delay between each detection Adjustable from 1 to 30 min Additional 10 s setting Electricity option Instant trigger time Connection to an electrical outlet only External trigger Night time illumination system 1 8 jack for normally open contact LEDs 38 LEDs Type Invisible LEDs Exposure Automatic infrared level adjustment Optical field of view 40 4 7 W x 3 5 H x 2 7 D REMOS Technology This camera is compatible with the REMOS Technology Wireless range Recommendations Operating temperature Maximum 500 ft to the BLACKBOX 4G controller supplied with TINY 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C BLACKBOX 4G CONTROLLER Memory storage Support e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Power source Accessories sold separately p 44 Composite video PAL NTSC Alkaline or lithium batteries 6 x AA Lithium battery pack Rechargeable battery pack LIT 09 LIT C 8 External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V Solar panel Solar panel SP 12V combi
26. does not want to record the sound the rubber cap needs to stay in place If sound recording is required the user must lift the rubber cap and turn it slightly so that the microphone receiver is completely cleared See figure below USB EXT TV out 33 EXTERNAL TRIGGERING 1 8 input which triggers the taking of photos or videos using a normally open contact Example Using a magnetic door contact connected to an alarm system see figure below 1 8 Mono connector not included 6 OJ Weld the two wires of a door contact to a 1 8 mono connector Insert the connector in the external trigger jack of the camera To transfer photos videos to a computer 1 Turn OFF the camera 2 Connect the USB cable supplied from the camera to a computer gt 3 The computer will detect the camera and install the driver automatically 4 Click on My Computer and select Removable Disk 5 Then click on DCIM and 100DSCIM to find all your photos and videos 6 Drag or save the files to the desired location Taking the memory card sold separately p 41 out of the camera and inserting it into the computer slot will achieve the same results Note Videos in MP4 format require the use of a compatible video player software such as VLC Windows Media Player or QuickTime 34 To transfer photos to a computer remove the memory card sold separately p 43 out of the receiver or the controller and insert it i
27. e memory card contains photos To obtain more information on the available accessories go to www spypoint com Here are the main accessories available POWER 12V DC Power cable CB 12FT 12 ft power cable with alligator clips at one end to connect a 12V battery to a camera ku 12 volt Adaptor AD 12V AC adaptor 6V to 12V Powers the camera from an elec trical outlet Lithium battery pack LIT O9 Additional rechargeable lithium battery pack fits most SPYPOINT products Lithium battery pack amp charger LIT C 8 Rechargeable lithium battery pack and AC charger with charge indicator light Fits most SPYPOINT products ih Rechargeable 6V 12V battery charger amp housing kit KIT6V 12V Universal kit with two 6V rechargeable batteries 2 8Ah with 6V 5 6Ah and 12V 2 8Ah output configuration and AC charger Water resistant ABS plastic case 12 ft power cable and strap included Camo pattern Compatible with all SPYPOINT pro ducts equipped with a 12V power jack Rechargeable 12V battery amp charger set BATT 12V 12 volt 7 0Ah rechar geable battery and AC charger to power the camera 41 Rechargeable 12V battery charger amp housing kit KIT 12V 12 volt 7 0Ah rechar geable battery with a water resis tant ABS plastic case AC charger 12 ft power cable PW 12FT and carrying strap included Compa tible with all SPYPOINT products equipped with a 12V power j
28. e steps in the PREPARING THE CAMERA p 31 and PREPARING THE BLACKBOX 4G CONTROLLER p 31 sections Note A camera cannot be synchronized to multiple controllers USE THE CELLULAR FUNCTIONS OF THE CONTROLLER The controller communicates with the mySPYPOINT server to update its sta tus or to send photos to the user account To do this 1 The camera must be synchronized beforehand with the controller follow the steps in the PREPARING THE CAMERA p 31 and PREPARING THE BLACKBOX 4G CONTROLLER p 31 sections 2 The controller must be in CELLULAR mode Settings m Camera Mode Cellular 3 Then set the COUNTRY and CARRIER options 4 In the TRANSMISSION MODE option Settings m Transmission Mode set the SYNCHRONIZE et SYNCHRONIZE AT options 5 Return to the main menu The controller immediately searches for the cellular signal Make sure you have a cellular signal all Truphone 4G Start BlackBox Settings Manage Cameras View Note It s preferable to install the controller outside to facilitate the cel lular signal reception 6 The controller is ready to receive photos from the camera and send it to a mySPYPOINT account Select START BLACKBOX 32 SOUND RECORDING The SPYPOINT camera offers the possibility to record sound in VIDEO mode When the VIDEO mode is selected the camera automatically re cords the sound Under the camera you will find a rubber cap with the inscription MIC If the user
29. ecord sound in video mode p 33 Antenna Allows wireless communication between the BLACKBOX and the camera 12V power jack The receiver can be powered from an ex ternal 12 volt DC input such as a 12V bat tery or a 12V adapter each sold separately p 11 Slot for installation strap Allows the user to install the receiver using the installation strap included p 23 Battery case Case for AA batteries p 11 SD card slot An SD card is required to record photos p 15 Test light Allows the user to know the battery status p 11 and indicates the synchronization period p 24 ON OFF Allows the user to turn on off the device 1 BUSY LED Lights up when the controller is record 2 Antenna Allows wireless communication between the BLACKBOX D and the camera s 3 Viewing screen Allows the user to access the main menu see battery level and view photos Screen with zoom and pan functions p 25 4 SD card slot An SD card is required to record photos p 15 5 Navigation buttons Buttons to set the controller p 25 6 TV OUT Allows the user to view or delete the photos directly on a television p 26 7 Battery switch Allows the user to select the power source according to the type of batteries used p 11 8 ON OFF Allows the user to turn on off the device 9 1 12V power jack 1 The controller can be powered fr
30. een of the controller turns off e The controller is ready to receive photos following the selection of the START BLACKBOX option in the menu The screen turns off in order to preserve battery life e To return to the screen turn off the controller and turn it on again The controller does not respond e Remove the batteries and reinstall them p 12 Replace alkaline batteries or recharge the lithium battery pack The controller does not commu nicate with the camera Install the latest update available for the BLACKBOX 4G controller and camera available on www spypoint com under SUPPORT section Synchronize the controller with the camera p 31 The controller does not receive all the photos Bring closer the camera and make a test signal p 28 The desired provider is not present in the list Contact the SPYPOINT technical service at 1 888 776 7646 or tech spypoint com The controller don t find the cellular network Turn off the controller and turn it on again Make sure that the coverage area of the service provider supports the area where the TINY and the controller are used The controller works but is losing its time and date settings e The time battery must be replaced p 13 The controller takes water e Verify if the controller is correctly closed e Clean the rubber located inside the controller 40 Error message Possible solutions Please
31. elecom GG Telecom 120 J Aur le Roux Victoriaville QC G6T ON5 555 VT route 78 Swanton Vermont 05488 IMPORTANT Under no circumstances will GG Telecom accept returned products without a Return Material Authorization number RMA It is essential to contact GG Telecom before making a return The customer is liable for loss or damage to the product that may occur during the transport to GG Telecom We recommend the use of a traceable method of shipping to ensure protection WWW SPYPOINT COM
32. ely p 44 2 Allows the user to connect a solar panel SP 12V to maintain the charge of the lithium battery pack LIT 09 LIT C 8 sold separately 10 Battery case Case for AA batteries or a rechargeable lithium battery pack p 12 11 Slot for installation Allows the user to install the controller using strap the installation strap included p 28 12 Access to the time Battery that keeps the time and date in battery located inside the battery case memory p 13 The battery level is shown in the REPORT mode 4 4 full 1 4 low and in the bottom right corner of the screen when the camera is in TEST mode When the battery level shows 2 4 or when a single line remains see figure below the camera will continue to take photos but we strongly recommend to change the AA batteries or charge the lithium battery pack before they are empty If a video is being recorded and the batteries level reaches 0 the camera saves the file before shutting down ow W AA BATTERIES This camera requires 6 AA batteries 1 5V The use of alkaline or lithium batteries is strongly recommended During the installation of the AA batteries slide the battery switch to ALK i e alkaline Insert the batteries in the removable battery holder as indicated and insert it inside the camera see figure below Battery polarity must be followed Please note that the voltage of rechargeable AA batteries 1 2V is insufficient to power the SP
33. er performs per day This sets the frequency at which the controller com municates with the mySPYPOINT server to update its status or to send photos to the user s account When set to Each detection it requires more battery power 2 Synchronize at Allows the user to choose at what time of the day that the controller performs its initial synchronization with the mySPYPOINT server E g If the option Synchronize is set to 6 day and Synchronize at at 04 00 the controller performs 6 synchronizations per day and starts sen ding first at 4 h 8h 12 h 16h 20 h and 24 h MySPYPOINT mode The controller communicates with the mySPYPOINT server to update its status or to send photos to the user s account Mode mySPYPOINT Synchronize 1 day Synchronize at 00 00 MySPYPOINT subscription is required Activation procedure available at spypoint com activation MMS mode The controller communicates by MMS to update its status or to send photos When the MMS mode is selected up to 5 different phone numbers can be entered The MMS will be sent to these phone numbers One MMS is charged for each recipient accordingly to the rates of the plan used To add or modify a number e Select the desired line and press OK e Uset to select the numbers on the electronic keyboard then press OK The country code and area code must be entered e When it is done select lt and press OK Mode MMS Synchronize 1 day Synchronize
34. er receives the photos of the camera saves it on its memory card and sends them to the mySPYPOINT server subscription required in the user account according to the number of synchronization selected see Transmission mode option The controller works with HSPA cellular network A cell phone plan is required from a cellular service provider and must be compatible with this network The coverage area of the service provider must also support the area where the TINY and the controller will be used When the Cellular mode is selected the Auto time Country Carrier and Transmission mode options appears Note In Cellular mode it is recommended to use an external 12 volt power source BATT 12 KIT6V 12V KIT 12V AD 12V sold separately in order to get best results and longer battery life See POWER section for more details p 44 Country Allows the user to select the country in which the controller is used This option displays a list of matching cellular providers This parameter must be correspond with the service provider of the user Choose in the list of supported providers the one that corresponds to the SIM card used in the controller 29 Transmission mode Allows the user to choose the means of transmitting photos Each mode has these options 1 dr 2 B sr 1 Synchronize Each detection 1 2 6 12 times per day Allows the user to choose the number of synchronizations that the control l
35. h the and buttons and press the OK button to return to the options The group option allows user to regroup one or many cameras to a controller when multiple controllers are installed in the same transmission area Resync Allows the user to synchronize a new camera to the BLACKBOX 4G control ler p 31 By default the TINY camera supplied with the BLACKBOX 4G is already synchronized to the controller as CAMERAQO1 in groupe 1 Each additional camera TINY PLUS must be synchronized with the BLACK BOX 4G p 31 Settings Allows the user to configure the differents settings of the synchronized cameras See the SETTINGS e Camera section p 21 for more details concerning each setting When all desired changes are completed press the BACK button to send the new settings to the camera The message Update settings to camera appears on the BLACKBOX 4G screen and select Yes The screen of the camera indicates Receiving The controller returns to the main menu when the changes were completed Get camera status Indicates the battery level and the percentage of used space in the memory card of the camera Start stop camera Allows the user to remotely stop or restart photos taking These options can be used if the user is working in the zone of detection of the camera and he doesn t want photos to be taken When finished he can remotely start the camera to continue taking photos Range test If the icon of the wireless s
36. he CR2032 lithium button battery saves the time and date To replace the battery 1 Turn off the controller 2 Loose the screw located behind the controller to remove the cover of the battery case 3 Loose the screw at the bottom of the battery case to access to the time battery 4 Using a flat screwdriver push the battery upwards and lift to remove it from its holder 5 Replace the battery the polarity must be respected side facing up 13 MEMORY CARD A memory card is required to record photos and videos The camera is compatible with SD SDHC memory cards up to 32 GB capacity sold separately p 41 When the PHOTO VIDEO or TEST mode is selected and no memory card is used the screen displays Insert memory card and the camera beeps When the SD card is full the screen displays Memory card full Here is a table of the approximate number of photos and length of videos that can be recorded with different memory card capacities Many photo and video resolutions are noted see those corresponding to the camera Photo Kd 23Ju3 _u2E 2AJA DD S I 14 INSERTING THE MEMORY CARD Insert an SD SDHC memory card up to 32 GB capacity in the card slot gold contacts facing up The card is inserted correctly when a click is heard Before inserting or removing a memory card always turn off the camera to prevent loss or damage of the photos already recorded REMOVING THE MEMORY CARD Lightly press the
37. hotos videos directly on TV p 21 1 Photo lens Image sensor and infrared filter 2 Antenna Allows wireless communication between the TINY PLUS TINY WSF camera and a BLACKBOX receiver controller TINY W TINY p 14 3 Invisible LEDs Night lighting to obtain black and white photos and videos 4 Test light Flashes in TEST mode when there is detec tion and flashes 60 seconds in PHOTO VIDEO mode to allow the user to leave without being photographed or recorded 5 Side sensors 2 Allows to prepare the camera so when the target passes through the central sensor the system is already pre triggered When activated the detection area is expanded p 20 6 Fresnel lens Expands the detection area and increases the in front of the central sensitivity of the camera s motion sensor sensor 7 Light sensor Allows the lighting of the LEDs panel at night 8 Cable lock hole Allows the user to install a CL 6FT cable lock p 42 9 Tripod mount Standard 20 tripod mount 10 Slot for installation Allows the user to install the camera using strap the installation strap included p 17 11 Power button Press the button to turn on or off the camera 12 BUSY LED Lights up when the camera is recording p 14 13 Navigation buttons Buttons to set the camera p 17 14 Viewing screen Allows the user to access the main menu and view photos videos p 17 15 Microphone R
38. ignal on the BLACKBOX 4G controller in an area of 500ft Wireless sensor MS 1 Off 1 2 3 4 5 6 7 Allows the camera to be triggered wirelessly by one or more MS 1 devices through the REMOS wireless technology sold separately p 42 IR Booster On Off Allows the camera to trigger up to a distance of 50ft one or more IR BOOSTER infrared lighting devices without the use of an additional trans mitter through the REMOS wireless technology Sold separately p 42 S REPORT The report mode keeps a record of the last period of use of the camera and indicates the battery level 4 4 full The beginning date corresponds with the moment the camera is set to either PHOTO or VIDEO mode Thus the report is reset when changing modes 1 Reportrom 06 28 To 06 28 2 Dayevents 0000 3 Nightevents 0000 4 Total 0000 5 Time 09 38 6 Date 06 28 7 Batteries 4 4 8 SD Remaining 3858 photos 9 SD Used 0000 files Beginning and end date of the report Number of photos or videos taken during the day Number of photos or videos taken at night Total of photos or videos taken Current time of the camera Current date of the camera Battery level 1 4 low 4 4 full Remaining space on the SD card estimated by a number of photos Used space on the SD card total number of files only includes photos and videos taken by a SPYPOINT camera OONAUAWN ks VIEW Allows the user to view or delete
39. ignal appears green and stays green for more than 10 seconds the signal is strong enough and stable to enable wireless transmission of photos to the controller Press BACK controller to return to the menu If the icon of the wireless signal is red 1 the signal is too weak Bring closer or move the controller Make A sure that the controller has been synchronized with the selected camera VIEW O Allows the user to view or delete the recorded photos on the controller screen When VIEW mode is selected choose the name of the desired camera and press OK The last recorded photo automatically appears on the screen Press or gt to view the next or previous Press OK to view the different options available Delete Allows the user to erase from the memory card the pho to seen on the screen Delete All Allows the user to erase from the memory card all stored photos SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER Preparing the camera 1 Set the name of the camera e In the SETTINGS menu choose the Camera ID option and press OK e Determine the name of the camera by pressing the or buttons to change the letter and press OK to go to the next space Tip Use a name that makes it easy to identify the camera e g cottage front house backyard etc 2 Continue changing other parameters of the camera as needed 3 To enable communication with the controller e Still in the SETTINGS menu select the Wirele
40. insert SD card The use of a memory card is required to record photos The controller cannot access the memory card e Turn off the controller and turn it on again Card error e Remove the memory card and insert it again p 16 e Verify if the gold contacts are clean e Format the memory card No SIM Card The use of a SIM card is required for cellular functions of the controller SIM card error The SIM card is missing or defective e Insert a SIM card p 16 e If defective use a new SIM card SIM card locked To unlock the SIM card contact the cellular service provider Modem error The cellular modem of the camera is defective e Turn off the controller and turn it on again e Contact the SPYPOINT technical service at 1 888 776 7646 or tech spypoint com No signal The controller didn t find a signal e Turn off the controller and turn it on again e Move the controller e Make sure that the coverage area of the service provider supports the area where the TINY and the controller are used No service The network provider of the SIM card can t be joined e Contact the SPYPOINT technical service at 1 888 776 7646 or tech spypoint com No data plan No data plan is active e Review the data plan from the cellular service provider e Contact the SPYPOINT technical service at 1 888 776 7646 or tech spypoint com No image There are no files to view Verify if th
41. ked eye wireless infrared module that allows the user to amplify the infrared lights at night for clearer shots Compatible with REMOS technology When used with REMOS compatible cameras the transmitter is not necessary OTHERS ACCESSORIES REMOS Wireless motion sensor TINY S MS 1 that allows you to trigger the ca mera remotely up to 500 ft away Works with all cameras compatible with REMOS technology Requires 1 alkaline 9V battery or a 12V power Supply not included Also avai lable in black Wireless motion sensor IR Booster IRB W 100 LED wireless infra red module that allows the user to amplify the strength of the infra red lights for clearer night shots To obtain more POWER 12V DC Power cable CB 12FT 12 ft power cable with alligator clips at one end to connect a 12V battery to the receiver Aa 12 volt Adaptor AD 12V AC adaptor 6V to 12V Powers the receiver from an elec trical outlet sl Rechargeable 6V 12V battery charger amp housing kit KIT6V 12V Universal kit with two 6V rechargeable batteries 2 8Ah with 6V 5 6Ah and 12V 2 8Ah output configuration and AC charger Water resistant ABS plastic case 12 ft power cable and strap included Camo pattern Compatible with all SPYPOINT pro ducts equipped with a 12V power jack information on the available accessories www spypoint com Here are the main accessories available go to Solar panel
42. leting the first recorded files Power Batteries Electricity Allows the user to select the type of power supply Choose Electricity if the camera is powered by a main electric power supply using a 12 volt DC adapter AD 12V sold separately p 41 A main electric power supply is recommended when camera is used for security purposes It provides an instant trigger time when a movement is detected The lithium battery pack and the AA batteries can remain safely inside the camera and it is ideal for blackouts A 12 volt DC adapter that can provide a minimum of 800 mA is required p 41 Note When using a main electric power supply the MULTI SHOT mode and the DELAY option are disabled as the camera triggers instantly every time it detects motion Also the printing of the temperature on each photo is disabled Infrared On One LED Off Allows the user to choose the desired infrared lighting On All LEDs work when taking photos or videos at night One LED Only a single LED works see figure This option can be use LED for ful when using an IR Booster Invisible infrared sensor LEDs IR Booster sold separately p 42 Off LEDs are deactivated so your night photos or videos are black Side sensors On Off When the side sensors are activated a total of 7 zones are covered The central sensor covers 5 zones The side detectors are mainly used to pre pare the camera so when your
43. mory none e External memory SD SDHC card up to 32 GB Power source Accessories sold separately p 43 Alkaline or lithium batteries 6 x AA External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V 2 7 W x 3 5 H x 2 7 D 48 CAMERA Photo recording Photo resolution 3 MP 5 MP 10 MP File format JPG Time lapse mode Predefined intervals from 30 sto 1 h Multi shot mode Up to 6 photos per detection Stamp only on photos Date time temperature C F and moon phase Capture mode Color by day black and white by night Video recording Video resolution 640 x 480 1280 x 720 File format AVI Sequence length Capture mode Adjustable from 10 to 90 s Color by day black and white by night Sound recording Automatically recorded in video mode Mono Memory storage Support e Internal memory none e External memory SD SDHC card up to 32 GB Built in screen 2 4 LCD TV output Composite video PAL NTSC Computer output USB 2 0 Power source Accessories sold separately p 41 Alkaline or lithium batteries 6 x AA Lithium battery pack Rechargeable battery pack LIT 09 LIT C 8 External 12V jack 12V battery KIT6V 12V KIT 12V BATT 12V or 12V adapter AD 12V 49 Solar panel Solar panel SP 12V combined with rechargeable battery pack LIT
44. ned with rechargeable battery pack LIT 09 LIT C 8 3 9 W x 4 7 Hx 1 9 D Wireless range Maximum 500 ft 150 m from camera to BLACKBOX 4G controller supplied with TINY Cellular transmission MySPYPOINT e Wireless photo transmission via mySPYPOINT website e A cellular plan with data plan and mySPYPOINT subscription are required For more information visit www myspypoint com MMS e Photo transmission by MMS e A cellular plan with a MMS plan is required Email e Photo transmission by email e A cellular plan with data plan is required Operating temperature 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C FCC REGULATIONS FCC Part I5 C This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commission FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequen cy energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and
45. ng EL ka A E EN TR 36 RECEIVER BLACKBOX ssesiacicceceieecknisdiavaaieileiinieaniaaiieatedeeiavearanereness 38 Controller BLACK BOX D s sa siss a a aa rrea ennaa aaia 39 Controller BLACKBOX 4G aaa 40 Error messages S E e PRE E A T 37 Controler BLACKBOX D Visio isis np ad enirar 39 Controller BLACKBOX 46Y ss din a O F 40 Available accessories EE RN S SI RS R 41 RECEIVE BLACKBOX sa Tl O R ka 43 Controller BLACKBOX D BLACKBOX 4GY 4uuaaavanavsnsnannnnnnananannnnnnnnnnnnananaa 44 Specifications TIN a N EE E E 45 THEI SA A 46 TUN A a N na E b 47 TEIN n D R a a n a L 49 TIN aaa FR 51 FESCUE ION oe sl aa SR I R 53 Limited warranty aniaaanasnasassnaananannnnnanannnnnnnanannnana 24 R pa SEVICE an R I n 24 4 es ee RI Ca Camera Camera TINY PLUS Installation strap Installation straps TINY 7 TINY WEF TINY W3 TINY TINY 7 TINY PLUS TINY W TINY W3 TINY Wireless backup system Quick start guide seting started Ba E oo B BLACKBOX receiver BLACKBOX D controller Quick start guide Quick start guide TINY W5F TINY W camera TINY W receiver TINY W controller BLACKBOX 4G controller USB TINY S ania Quick start guide TINY controller Dl Pm Q Audio video cable I a 600000000 Photos lens Antenna TINY PLUS TINY W TINY W3 TINY Invisible LEDs Test light O
46. ng It is possible to decrease the delay between detections to 10 seconds instead of 1 minute by using the following procedure AN Note that the battery life will be affected 18 Turn OFF the camera 2 Press and hold the button and turn ON the camera 3 10sec enabled appears on the screen meaning the minimum delay is now 10 seconds If this option is used the 30 minute delay disappears 4 To reset the camera to 1 minute delay follow the same procedure 10sec disabled appears on the screen see next figure P l SPYPGINT SPYR INT 10SEC ENABLED 10SEC DISABLED 10 s delay 1 min delay Multi shot 1 2 3 4 5 6 consecutive shots Takes up to 6 consecutive shots at each detection with a 10 second delay between each photo This option allows the user to get up to 6 photos from different angles when the camera is in PHOTO mode Note When the Wireless option is activated it is only possible to take up to 2 consecutive shots TINY PLUS TINY W TINY Video length 10s 30s 60s 90s Allows the user to select the duration of the recording when the camera is set in VIDEO mode Language English Francais Deutsch Italiano Espanol Allows the user to select a language for the camera menus Sensitivity Low Medium High Allows the user to choose the detection sensitivity of the camera A higher sensitivity allows the user to take more photos The camera
47. nto the computer slot 1 Click on My Computer and select Removable Disk 2 Then click on DCIM and 100DSCIM to find all the recorded photos 3 Drag or save the files to the desired location The names of the photos recorded by the camera and the BLACKBOX D BLACKBOX 4G controllers start by PICT while those stored in the BLACK BOX receiver starts by PICW The BLACKBOX D BLACKBOX 4G controllers create a folder for each synchronized camera and automatically class photos to different folder 35 Problem Possible solutions Impossible to turn on the camera e Verify if there are batteries in the camera Verify if the batteries are correctly installed p 10 Verify if the battery switch position is positioned according to the power source p 10 Install the latest update available on www spypoint com under SUPPORT section Replace alkaline batteries or recharge the lithium battery pack The screen of the camera turns off e The camera may be set to PHOTO or VIDEO mode and the screen turns off after a period of 60 seconds in order to preserve battery life e The camera automatically resets itself to PHOTO or VIDEO mode depending of the latest mode used or selected after 2 minutes of inactivity on the main menu To return to the screen turn off the camera and turn it on again No person animal on photos Sunrise or sunset can trigger the sensor Camera must be re orientated At night
48. oller and turn it on again e Remove the memory card and insert it again p 16 e Verify if the gold contacts are clean e Format the memory card TROUBLESHOOTING ERROR MESSAGES Problem Possible solutions Error message Impossible to e Verify if there are batteries in the controller Insert memory turn on the e Verify if the batteries are correctly installed p 12 card controller e Verify if the battery switch position is positioned according to the power source p 12 e Install the latest update available on www spypoint Gard ccror battery pack The screen of the controller turns off e The controller is ready to receive photos following the selection of the START BLACKBOX option in the menu The screen turns off in order to preserve Low battery Appears on the screen just before the controller turns off Recharge the batteries or insert new ones Always verify the battery level before using the controller battery life No image e The controller automatically resets itself after 2 9 There are no files to view Verify if the memory card contains photos minutes of inactivity on the main menu e To return to the screen turn off the controller and turn it on again Protected file The controller beeps It is impossible to delete the file because it is protected To delete this file and all the others just format the memory card Insert a memory card p 16 e The emergency buzzer was acti
49. om an external 12 volt DC input such as a 12V 2 Solar panel jack battery or a 12V adapter each sold separately p 11 2 Allows the user to connect a solar panel SP 12V to maintain the charge of the lithium battery pack LIT 09 LIT C 8 sold separately 10 Battery case Case for AA batteries or a rechargeable lithium battery pack p 11 11 Slot for installation Allows the user to install the controller using strap the installation strap included p 25 12 Access to the time Battery that keeps the time and date in battery located inside the battery case memory p 12 1 BUSY LED Lights up when the controller records a file transfer photos or searches for the cellular Signal 2 Antenna Allows wireless communication between the controller and the camera s 3 Viewing screen Allows the user to access the main menu see battery level and view photos 4 SD card slot An SD card is required to record photos p 16 5 SIM card slot A SIM card is required for cellular functions p 16 6 Navigation buttons Buttons to set the controller p 28 7 Battery switch Allows the user to select the power source according to the type of batteries used p 12 8 ON OFF Allows the user to turn on off the device 9 1 12V power jack 1 The controller can be powered from an external 12 volt DC input such as a 12V 2 Solar panel jack battery or a 12V adapter each sold Separat
50. on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC rules Opera tion is subject to the following two conditions 1 this device may not cau se harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation C Hereby GG Telecom declares that this camera is in compliance with the essential requirements and other relevant provisions of Directive 99 5 EC The user can obtain a copy of the Declaration of Conformity by e mail at info spypoint com RoHS 53 This SPYPOINT product designed by GG Telecom is covered by a one 1 year warranty on material and workmanship starting from the original date of purchase The sales receipt is the client s proof of purchase and must be presented if warranty service is needed This warranty will be honored in the country of purchase only This warranty does not cover any GG Telecom produc
51. on again E SETTINGS Allows the user to configure the different parameters of the synchro nized cameras 1 When SETTINGS is selected the complete list of options in the menu is displayed If more than one camera is synchronized to the controller choose the one that is to be changed 2 Make the desired changes and press OK to confirm 3 Press the BACK button to send the new parameters to the camera 4 The message Sending Settings appears on the screen of the BLACK BOX D and the screen of the camera shows Receiving The controller returns to the main menu when the changes are successful F REMOTE Allows the user to see the camera status to start stop the camera to verify the quality of the wireless signal and to have an overview of the field of view of the camera in real time If more than one camera is synchronized to the controller choose one from those available Get camera status Indicates the battery level and the percentage of used space in the memory card of the camera Start stop cam ra Allows the user to remotely stop or restart photos taking These options can be used if the user is working in the zone of detection of the camera and he doesn t want photos to be taken When finished he can remotely restart the camera to continue taking photos Range test Allows the user to check the quality of the wireless signal between the cam era and the controller If the icon of the wireless signal is red the
52. orientation of the receiver We strongly recommend installing the receiver on the same side of the antenna of the camera see figure below SIGNAL STRENGHT a2 H For best results the antennas of the two devices must also point upwards and their respective height should be approximately the same see figure below SIGNAL STRENGHT 23 INSTALLATION WITH THE SUPPLIED STRAP WIRELESS SIGNAL TEST The quality of the wireless signal between the TINY W camera and the BLACKBOX receiver can be checked on the camera Perform the range test after the final installation of the devices To see the wireless signal icon on the main menu the WIRELESS option in Settings should be on 1 Select the SIGNAL mode KJ 2 Select the Range test option RangeTest If the icon of the wireless signal is red the signal is too weak Move the receiver or bring it closer If the icon of the wireless signal is green and stays green for at least 10 seconds the signal is strong and stable enough to enable wireless transmission of photos to the receiver Note If the receiver is turn off and not synchronized with the camera the signal icon remains red MANUALLY SYNCHRONIZING ONE OR MULTIPLE SETS TINY W CAMERA BLACKBOX RECEIVER IN THE SAME PERIMETER To change the synchronization channel or to install one or many sets TINY W BLACKBOX receiver in the same area of transmission it is necessary to manually synchronize each camera with
53. recorded photos and videos on the camera screen or on a television e Viewing with the screen of the camera When the VIEW mode is selected the latest photo or video recorded appears on the screen automatically Press or to view next or previous images Press OK to view the different options available 21 Play Allows the user to play or pause the video on the screen This option is available only for videos Date and time Allows the user to view the date and time printed on the photo Protect Allows the user to protect a photo or video to prevent it from being deleted by selecting Delete All Delete Allows the user to erase from the memory card the photo or the video seen on the screen Delete all Allows the user to erase from the memory card all stored photos and videos with the exception of protected files Format Allows the user to format memory card and delete all protected photos and videos Exit Allows the user to exit the menu to return to the viewing screen Note The number of yellow stars that appear to the right of the screen corresponds to the resolution of the photos Low resolution k Medium resolution High resolution e Watching on TV Allows the user to view or delete the photos or videos directly on a TV 1 Turn on the camera 2 Connect the yellow end of the RCA cable supplied into the VIDEO IN of the TV and the other end into the TV OUT of the camera The options are the
54. roup To do this 1 On the controller select the SIGNAL mode F and press OK 2 Hold down the gt button for 3 seconds to reach the group option located in the upper right corner of the screen controller and press OK 3 Use f or buttons to assign a new group to each additional controller maximum 5 BLACKBOX D and press OK 4 Synchronize the cameras to the new group follow the steps in the PREPARING THE CAMERA P 27 and PREPARING THE BLACKBOX D CONTROLLER p 27 sections Note A camera cannot be synchronized to multiple controllers CONTROLLER AND CAMERA INSTALLATION The strength of the wireless signal varies depending on the orientation of the controller We strongly recommend installing the controller on the same side of the camera s antenna see figure below SIGNAL STRENGHT Hi 3 H For best results the antennas of the two devices must also point upwards and their respective height should be approximately the same see figure below w SIGNAL E R STRENGHT INSTALLATION WITH THE SUPPLIED STRAP MAIN MENU Use the T and buttons to navigate in the interface and to modify the selection Use the OK button to select and the BACK button to return to the previous menu o START BLACKBOX Select this option when the controller and camera s have been configured and synchronized The controller is now ready to receive photos from the synchronized camera s Note When this option is sele
55. s type of battery is less affected by cold temperatures and lasts up to 3 times longer than an alkaline batteries During the installation of the lithium battery pack slide the battery switch to LIT 09 Insert the lithium battery pack in the compartment as indicated Lithium battery pack LIT 09 LIT C 8 12 EXTERNAL 12V The controller can also be powered by an external 12 volt DC input such as a 12 volt battery KIT 12V BATT 12V or KIT6V 12V or a 12 volt adapter AD 12V each sold separately p 44 During the installation of a 12 volt connection slide the battery switch to ALK the AA batteries can remain Safely inside the controller If combined with a lithium battery pack slide the battery switch to LIT 09 For available accessories see p 44 SOLAR PANEL The controller also offers the possibility to connect a solar panel SP 12V sold separately p 44 to maintain the charge of the lithium battery pack sold separately p 44 While installing the rechargeable lithium battery pack slide the battery switch to LIT 09 to activate the charging system of the solar panel Battery switch position depending on the power source Power source e 6AA e 12V e 12V 6AA Battery switch position ALK e LIT 09 e 12V LIT 09 e Solar panel LIT 09 LIT 09 Rechargeable lithium battery pack sold separately LIT 09 or with a charger LIT C 8 TIME BATTERY Located inside the battery case t
56. same as viewing on the screen of the camera previously men tioned F SIGNAL TINY PLUS TINY W5F TINY W3 TINY Allows the user to test the wireless signal and to synchronize the camera with BLACKBOX systems See p 23 and p 25 for more details REMOS TECHNOLOGY TINY lt The cameras compatible with the REMOS technology wireless functionnali ties can be combined with e RC 1 Remote control Allows the user to control the camera remotely e MS 1 Motion sensor Allows the user to trigger the camera remotely e IRB W B Infrared Booster Used to optimize the infrared lighting to accentuate the quality of night photos and videos See SETTINGS p 17 and AVAILABLE ACCESSORIES p 41 sections for more details The optional steel security box SB T affects the wireless functio nalites of products compatible with REMOS technology The wireless transmission of photos from the cameras TINY to the controller is also affected 22 By default the TINY WS camera is synchronized with its receiver on channel 1 and the icon SYNC is green see SIGNAL mode in menu Channel 1 Sync To change the synchronization channel or to add other sets TINY W camera BLACKBOX receiver in the same area refer to the MANUALLY SYN CHRONIZING ONE OR MULTIPLE SETS IN THE SAME PERIMETER section p 24 INSTALLATION OF THE RECEIVER AND THE CAMERA The strength of the wireless signal varies depending on the
57. sensor PIR Detection angle of the main 30 sensor Detection angle of the side 70 sensors Detection range Adjustable from 5 to 65 ft Delay between each detection Adjustable from 1 to 30 min Additional 10 s setting Electricity option Instant trigger time Connection to an electrical only outlet External trigger 1 8 jack for normally open contact Night time illumination system LEDs 38 LEDs Type Invisible LEDs Exposure Automatic infrared level adjustment Optical field of view 40 4 7 W x 3 5 H x 2 7 D Maximum 500 ft to the BLACKBOX D and BLACKBOX 4G controllers supplied with the TINY W and TINY cameras Wireless range Recommendations Operating temperature 4 F to 122 F 20 C to 50 C Storage temperature 22 F to 167 F 30 C to 75 C CAMERA Photo recording Photo resolution 3 MP 5 MP 8 MP File format JPG Time lapse mode Predefined intervals from 30 sto 1 h Multi shot mode Up to 6 photos per detection Stamp only on photos Date time temperature C F and moon phase Capture mode Color by day black and white by night Video recording Video resolution 320 x 240 640 x 480 File format AVI Sequence length Adjustable from 10 to 90 s Capture mode Color by day black and white by night Sound recording Automatically recorded in video mode
58. spective height should be approximately the same see figure below SIGNAL STRENGHT MAIN MENU Use the f and buttons to navigate in the interface and to modify the selection Use the OK button to select and the BACK button to return to the previous menu Note When the controller is left inactive for more than 2 minutes on the main menu it automatically resets itself to START BLACKBOX mode To return to the main screen turn off the controller and turn it on again CY SIGNAL Allows the user to synchronize a new camera to a BLACKBOX D con troller see SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER section p 27 Also allows to add other sets camera BLACKBOX D in a same area see USING MULTIPLE CONTROLLERS IN THE SAME AREA section p 27 By default the TINY W camera supplied with the BLACKBOX D is already synchronized to the controller as CAMERA 01 in groupe 1 and the camera icon is green Each additional camera TINY PLUS must be synchronized with the BLACKBOX D To see the wireless signal icon on the main menu the WIRELESS option in SETTINGS should be on o START BLACKBOX D Select this option when the controller and camera s have been con figured and synchronized The controller is now ready to receive photos from the synchronized camera s Note When this option is selected the controller screen turns off in order to preserve battery life To return to the main screen turn off the control ler and turn it
59. ss option and press OK e Select On and confirm the selection by pressing OK then on BACK to return to the previous menu 4 Select the SIGNAL mode and press OK The camera searches for the controller 31 Preparing the BLACKBOX 4G controller 1 In the MANAGE CAMERAS menu select the Resync option and press OK 2 A green checkmark will appear next to the Resync option to indicate that the synchronization is successful The name of the camera appears at the top of the options Group 1 CAMERAO1 Get Camera Status Start Camera Stop Camera Range Test Notes e It s possible to synchronize up to 10 cameras to a single controller e If the name of the camera is changed it is necessary to resynchronize the devices by following the steps in the PREPARING THE CAMERA p 31 and PREPARING THE CONTROLLER p 31 sections USING MULTIPLE CONTROLLERS IN THE SAME AREA When multiple controllers are installed in the same area of transmission it is necessary to manually synchronize each controller with its camera s in a different group To do this 1 On the controller select the MANAGE CAMERAS menu and press OK 2 Hold down the gt button for 3 seconds to reach the group option located in the upper right corner of the screen controller 3 Use the f or buttons to assign a new group to each additional controller maximum 5 BLACKBOX 4G and press OK 4 Synchronize the cameras to the new group follow th
60. t which has been subjected to misuse neglect and accidents or has been improperly used or maintained In addition this warranty is not applicable for all products purchased online from an unauthorized dealer Any modification or tam pering of the product will affect its operation performance durability and voids this warranty 24 INSTRUCTIONS FOR REPAIR SERVICE GG Telecom will repair the product without charge or replace it at its discre tion with an equivalent product if it has a manufacturing defect covered by the warranty described previously GG Telecom will pay the shipping costs only for the return of the products covered by the warranty The shipping costs for an item sent will be assumed by the customer Repairs for damages not covered by the warranty will be subject to a reasonable charge The customer will pay all shipping costs 1 BEFORE sending a product for repair the costumer is welcomed to contact GG Telecom technical support team at 1 888 779 7646 or tech spypoint com and to clearly describe the problem and give a phone number where she or he can be reached It happens regularly that some problems can be solved over the phone 2 If a product needs to be sent an RMA number will be given to the customer Return Merchandise Authorization 3 The original receipt or a copy must be sent along with the package 4 The RMA number must be written on the outside of the package and sent to CANADA United States GG T
61. target passes through the central sensor the system is already pre triggered increasing greatly the reaction time of your camera ideal when the camera is placed near a narrow trail 34 Camera 65 Detection distance central lt lt 30 Detection distance of the side sensors s Side sensors Detection angle of the central sensor c Central sensor Viewing angle for TINY series cameras lt Detection zone Detection angle including both lt Viewing field central and side sensors 2 AN The side sensors require more battery power Time lapse Off 30s 1m 3m 5m 15m 30m 1h Allows the camera to take photos at regular preset intervals For example if the option 5m is selected in the TIME LAPSE mode the camera takes a photo every 5 minutes during the period of operation start time and stop time even if there is no detection This option allows the user to obtain photos of game outside the detection range of the camera Note The TIME LAPSE mode only applies in PHOTO mode not in VIDEO mode When TIME LAPSE mode is selected the DELAY option and the MULTI SHOT mode are disabled Remote control RC 1 On Off Allows the user to use the RC 1 remote control which works with the REMOS wireless technology sold separately p 41 The remote control allows to activate deactivate the detection of the camera to remotely take a photo video in an area of 500 ft and to activate the buzzer s
62. the controller e While still in the SETTINGS menu select Wireless option and press OK e Select On and confirm the selection by pressing OK then on BACK to return to the previous menu 4 Select the SIGNAL mode FO and press OK The camera searches for the controller Preparing the BLACKBOX D controller 1 Select the SIGNAL mode G 2 Press on Add new camera to see this option select a blue camera icon using lt or gt buttons The Sync icon changes from red to green in the camera screen when synchronization is Sync successful Notes e It s possible to synchronize up to 10 cameras to a single controller e If the name of the camera is changed it is necessary to resynchronize the devices by following the steps in the PREPARING THE CAMERA P 27 and PREPARING THE CONTROLLER p 27 sections e The Reset All option allows to find the original settings e It is possible to easily retrace the BLACKBOX D controller with a buzzer Signal by pressing the FN button on the RC 1 remote control The remote control must be previously synchronized with the camera which commu nicates with the controller The remote control sold separately p 41 is part of the product line compatible with the REMOS technology USING MULTIPLE CONTROLLERS IN THE SAME AREA When multiple controllers are installed in the same area of transmission it is necessary to manually synchronize each controller with it s camera s in a different g
63. the motion detector may detect beyond the range of the IR illumination Reduce sensibility setting p 19 Small animals may trigger the unit Reduce sensibi lity setting p 19 and or raise height of camera Motion detector may detect animals through foliage If a person or animal moves quickly it may move out of the camera s field of view before the photo is taken Move the camera further back or redirect the camera Make sure the mounting post or tree is stable and does not move The camera beeps e Insert a memory card p 14 Red light in front of the camera blinks Camera is set in TEST mode Camera is set in PHOTO or VIDEO mode The red light in front of the camera flashes for 60 seconds to allow the user to leave without being photographed or recorded The camera does not respond e Remove the batteries and reinstall them p 10 e Replace alkaline batteries or recharge the lithium battery pack The camera works but is losing its time and date settings e The time battery must be replaced p 10 The photos videos do not appear on the television Verify if the camera is correctly connected to the television using the RCA cable p 21 Verify if the memory card contains photos videos Impossible to take photos videos e Verify if there are batteries in the camera e Replace alkaline batteries or recharge the lithium battery pack e Memory card is full e Verify if the c
64. the settings menu Realign the camera can also be required In TEST mode it is possible to take a photo by pressing the OK button The photo is saved and appears in the VIEW mode INSTALLATION WITH THE SUPPLIED STRAP Recommended installation height about 3 feet above the ground Do not place the camera facing the sun 17 E SETTINGS Allows the user to change the different settings To set the system in English hold the button until Language is highlighted Press Ok select English with the button or and confirm the choice with OK The system will then change the menus to English Allows the user to assign a name to the camera maximum 8 characters Start time Stop time Allows the user to set the operation period of the camera The start and stop time programmed hours are the hours during which the camera is in action and records photos or videos Example If the user selects 15 00 start time and 19 00 stop time the camera will only detect for that period of time and will stay inactive for the remaining hours Press OK and use or to adjust the hours Press OK again to set the minutes When the time is properly set press Ok For a 24 hour activation the same start and stop times must be entered example 00 00 as start time and 00 00 as stop time These hours are the basic settings of the camera Note The hours are recorded over a 24 hour period For example 5pm is 17 00 00 00 means midnight
65. user to erase from the memory card all stored photos with the exception of protected photos Format Allows the user to format memory card and delete all protected photos Exit Allows the user to exit the menu to return to the viewing screen Press the f to enlarge the photo on the screen or to return to the original size When the photo is enlarged press OK to allow movement in the photo Then use the navigation buttons to explore different parts of the photo To disable the mouvement mode press OK again Note The number of yellow stars that appear to the right of the screen corresponds to the resolution of the photos stored in the BLACKBOX D Low r solution _ Medium r solution High r solution e Watching on TV Allows the user to view or delete the photos directly on a TV 1 Turn on the controller 2 Connect the yellow end of the RCA cable supplied into the VIDEO IN of the TV and the other end into the TV OUT of the controller The options are the same as viewing on the screen of the controller previously mentioned SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER Preparing the camera 1 Set the name of the camera e When SETTINGS is selected choose Camera ID and press OK e Determine the name of the camera by pressing the T or buttons to change the letter and press OK to go to the next space 2 Continue changing other parameters of the camera as needed 3 To enable communication with
66. vated with the RC 1 remote control The controller does not respond e Remove the batteries and reinstall them p 12 Replace alkaline batteries or recharge the lithium battery pack The controller does not commu nicate with the camera Install the latest update available for the BLACKBOX D controller and camera available on www spypoint com under SUPPORT section Synchronize the controller with the camera p 27 The controller does not receive all the photos Bring closer the camera and make a test signal p 25 The controller works but is losing its time and date settings The time battery must be replaced p 13 The controller takes water Verify if the controller is correctly closed Clean the rubber located inside the controller The photos do not appear on the television Verify if the controller is correctly connected to the television using the RCA cable p 27 Verify if the memory card contains photos 39 ERROR MESSAGES TROUBLESHOOTING Problem Possible solutions Impossible to e Verify if there are batteries in the controller turn on the e Verify if the batteries are correctly installed p 12 controller e Verify if the battery switch position is positioned according to the power source p 12 Install the latest update available on www spypoint com under SUPPORT section Replace alkaline batteries or recharge the lithium battery pack The scr
67. will only detect sources of heat in movement Make sure to have the least possible objects in front of the camera during the positio ning This prevents the camera to take photos when oriented towards the sun while an object moves in front of the camera e g a branch Allows the user to set the date as Month Day Year Time format 12h 24h Allows the user to select the time display over a period of 12 or 24 hours on the photos e g 6 00 pm or 18 00 Time Allows the user to set the time as Hour Minute Stamp Yes No Allows the user to have date time temperature and moon phases printed on the photos New moon Waxing Crescent First Quarter Waxing Gibbous Full moon Waning Gibbous Last Quarter Waning crescent 19 Quality Low Medium High Allows the user to set the photo resolution The low resolution allows the user to save space on the card and the high resolution allows the user to get a better photo quality When the quality is set to High the video resolution is automatically set to 1280 x 720 or 640 x 480 TINY W and when is set to Medium or Low the video resolution is automatically set to 640 x 480 or 320 x 240 TINY W F Temperature C F Allows the user to select the temperature display Continuous Yes No Allows the user to take photos or videos even if the memory card is full The camera will continue to record photos or videos by de

P INT SPY INT P SPY

Contents

Download Pdf Manuals

Related Search

Related Contents