俄罗斯 x-90 LED Spot说明书-V2
Contents
1. 7 Tilt Angle Select 540 b Pan Angle Pan 360 For built in program only Select 360 b Pan Angle Pan 180 For built in program only Select 140 Tilt Angle lt Tilt Angle Tilt 270 For built in program only 8 Channel Select 270 Tilt An gle Tilt 180 For built in program only Select 140 7 Tilt Angle Tilt 90 For built in program only Select 10 s12 Channel 8 Channel Basic Advanced mode A Temp Disp Select Advance Advance mode 8 Channel Basic Advanced mode Select Basic Basic mode 1 Temp E Disp lt Th Te T3 independent temperature of each LED 10 Reset System 50 50 50 temperature 10 Reset System S 10 Reset System whole machine reset seletion ll Load set Select NO no reset 10 Reset System whole machine reset seletion Select 0K whole machine reset lli Load set li Load set load original state seletion 1 DMX Address Select NO unload li Load set load original state seletion Select 0K load original data 3 Service Functions Press lt MODE ESC gt at least 10 second goes into motor start bit adjustment Init Motor Set Password D000 t Press the lt DOWN gt buttons to navigate the digit Press the lt UP gt buttons to navigate the value 1 moto vernier regulation manual Manufacturing code 2323 enter code and press enter enter the follow operation interface l Pan Init S lt ENTER gt L Pan Init Motor start bit adjustment 2 Tilt Init Set 128 for Pan e Tilt I2. resistance of the LED is not connected or already damaged the display will be open Short Under the condition that the temperature resistance of the LED is short circuited the display will be Short INVOEG LEDMH90S
3. INVOCA LEDMH90S USER MANUAL TABLE OF CONTENTS Maintenance 1 Statement 1 Attention Item 2 Product introduction 2 15 Control Channel 3 10 Control Channel 7 That Control Display 10 Fault conditions 14 Maintenance 1 Please keep the light in dryness and avoiding use in wet place 2 Using intermittently can be extended the life 3 Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better 4 Please do not wipe the crust using organic menstruum for avoid to damage the product Statement The product has well capability and intact packing when leave factory All of the user should comply with above warning item and manual any misuse cause of the damages are not included in our guarantee and also can not be responsible for any malfunction amp problem owing to ignore the manual Please forgive that we will not be notice for technical change Attention Item 1 For guarantee the life of product please don t put it on the wet place and also not use it in the place over 40 degree 2 Please don t lay the pro
4. duct on the unfixable or shakable place 3 Ask for the professional to maintain the product in order to avoid the danger of get an electric shock 4 Power supply should not be changed over 10 while the light is using it will be decreased the life of lamp if the power is too high but it will be influenced the luminosity if the power is too low 5 Please look round the manual for ensure the product can be used normally Product introduction Power supply AC100 240V 60 50Hz Power consumption 200W Fiting lamp 120W DMxX control channels 15 or 10 Colour wheel 1 7 single filter White Rainbow effect Gobo wheel 1 8 staic gobo with gobo shake open Rainbow effect Gobo wheel 2 7 rotating gobo open Rainbow effect Shuttle Flash rate 0 20Hz Effect wheel 3 face prism controllable rotating speed adjustable positive amp negative Focus motorized focus Dimmer 0 100 mechanic dimmer Iris 0 100 mechanic adjustable Maximum PAN movement 540 self correcting Maximum TILT movement 270 self correcting 8bit 16bit PAN TILT movement resolution Master Slave ativated by sound at pre programmed function 15 Control Channel Accept DMX512 control channel detail as follow Channel WDC value 1 PAN 0 255 540 TILT 0255 SPAN 1660 255 STILT 0 255 5 X Y Speed 0 255 PAN TILT controllable speed with decreasing 0 7 White 8 15 Blue 16 23 Yellow 24 31 Pink 32 39 G
5. e with increasing speed 188 203 Static Gobo 7 Shake with increasing speed 204 219 Static Gobo 8 Shake with increasing speed 220 237 Positive rainbow effect with increasing speed 238 255 Negative rainbow effect with increasing speed Channel DMX value Feature 0 7 Close 8 22 Open 23 85 Strobe effect with increasing speed sie ERA 101 165 Pulse strobe 166 180 Open 181 245 Random Shutter 246 255 Open 11 Dimmer 0 255 0 100 mechanic dimmer 12 Focus 0 255 Motorized focus zoom out to zoom in 0 7 White 8 15 Stop static prism effect 13 Prism 16 127 Rotation prism effect Positive rainbow 128 239 Rotation prism effect Negative rainbow 240 255 Stop static prism effect 0 9 Reserved 10 14 Blackout while pan tilt moving 15 19 Blackout while color wheel moving 20 24 Disabled blackout while pan tilt color wheel moving 25 29 Blackout while gobo wheel moving 30 34 Disabled blackout while pan tilt gobo wheel moving 35 39 Disabled blackout while color wheel gobo wheel moving 40 44 Disabled blackout while pan tilt color wheel gobo wheel moving ani 45 49 Reset pan 50 54 Reset tilt 55 59 Color Wheel 1 disk reset 60764 Reserved 65769 Gobo disk reset 70774 Reset Gobo rotation 75779 Reset Gobo 2 80784 Reset Focus 85789 Reset Prism Channel DMX value Feature 90 99 All channel reset 14 Channel 100 129 Reserved function 130 192 Run random pn
6. nit lt lt ENTER gt 2 Tilt Init Motor start bit adjustment 3 Color Init Set 128 for Tilt 13 3 Color Init lt ENTER gt 3 Color Init Motor start bit adjustment 4 Gobo 1 Init Set 128 for Color wheel 4 Gobo 1 Init lt lt ENTER gt 4 Gobo 1 Init Motor start bit adjustment 5 Grota Init Set 128 for Gobo wheel 1 5 Grota Init S lt ENTER gt 5 Grota Init Motor start bit adjustment b Gobo e Init Set 128 for Grota b Gobo 2 Init lt lt ENTER gt b Gobo 2 Init Motor start bit adjustment Focus Init Set 128 for Gobo wheel 2 Focus Init lt ENTER gt Focus Init Motor start bit adjustment 8 Prism Init Set 128 for focus 8 Prism Init s lt ENTER gt 6 Prism Init Motor start bit adjustment A Lamp Init Set 128 for Prism Lamp Init lt lt ENTER gt Lamp Init initial lamp brightness l Pan Init Set 128 modification 2 Password is 2322 enter the password and press lt ENTER gt goes into the item 1 Prism Half lt lt ENTER gt 1 Prism Half er te Set 000 modification e Focus Half lt lt ENTER gt 2 Focus Half ee ee Set O00 modification After entering into the interface above pressing the lt MODE ESC gt button can be back to the present running state or if no operating within 60s it will exit automatically ee Fault conditions Lamp Hot When the LED reach 90 C it is protected by the system and turn off automatically and display will show Lamp Hot Open Under the condition that the temperature
7. ogramme 193 255 Sound control 0 9 Reserved 10 19 Effect 1 20 29 Effect 2 30 39 Effect 3 40 49 Effect 4 50 59 Effect 5 60 69 Effect 6 70 79 Effect 7 80 89 Effect 8 90 99 Effect 9 100 109 Effect 10 110 119 Effect 11 15 Effect 120 129 Effect 12 130 139 Effect 13 140 149 Effect 14 150 159 Effect 15 160 169 Effect 16 170 179 Effect 17 180 189 Effect 18 190 199 Effect 19 200 209 Effect 20 210 219 Effect 21 220 229 Effect 22 230 239 Effect 23 250 255 Effect 25 10 Control Channel Accept DMX512 control channel detail as follow Channel T PAN 16 23 Yellow 24 31 Pink 32 39 Green 40 47 Red 48 55 Light Blue 56 63 orange red 3 Color 64 66 White Wheel 67 78 From White To Blue 79 92 From Blue To Yellow 93 107 From Yellow To Pink 108 120 From Pink To Green 121 136 From Green To Red 137 152 From Red To Light Blue From Light Blue To orange red Positive rainbow effect with increasing speed Negative rainbow effect with increasing speed 80 99 Gobo 1 Shake with increasing speed 100 119 Gobo 2 Shake with increasing speed 120 139 Gobo 3 Shake with increasing speed Channel DMX value Feature 140 159 Gobo 4 Shake with increasing speed 160 179 4 GOBO 180 199 Gobo 6 Shake with increasing speed Wheel PRE 200 219 Gobo 7 Shake wi
8. reen 40 47 Red 48 55 Light Blue 56 63 Orange red 6 Color 64 66 White Wheel 67 78 From White To Blue 79 92 From Blue To Yellow 93 107 From Yellow To Pink 108 120 From Pink To Green 121 136 From Green To Red 137 152 From Red To Light Blue 153 170 From Light Blue To Orange red 171 212 Positive rainbow effect with increasing speed 213 255 Negative rainbow effect with increasing speed 7GOBO Wheel 40 49 70 79 Channel DMX value Feature 80 99 Gobo Shake with increasing speed 100 119 Gobo 2 Shake with increasing speed 120 139 Gobo 3 Shake with increasing speed 7GOBO 140 159 Gobo 4 Shake with increasing speed Wheel 160 179 Gobo 5 Shake with increasing speed 180 199 Gobo 6 Shake with increasing speed 200 219 Gobo 7 Shake with increasing speed 220 237 Positive rainbow effect with increasing speed 238 255 Negative rainbow effect with increasing speed 0 10 Stop 8 GOBO 11 127 Gobo rotate index Rotation 128 191 Positive rainbow effect with increasing speed 192 255 Negative rainbow effect with increasing speed 10 19 20 29 30 39 40 49 9 Static 50 59 70 79 80 89 90 91 GOBO 92 107 Static Gobo 1 Shake with increasing speed Wheel 108 123 Static Gobo 2 Shake with increasing speed 124 139 Static Gobo 3 Shake with increasing speed 140 155 Static Gobo 4 Shake with increasing speed 156 171 Static Gobo 5 Shake with increasing speed 172 187 Static Gobo 6 Shak
9. rent operation DMX Signal DMX mode select channel 1 channel 512 2 Press the lt MODE ESC gt button repeatedly until you reach the desired menu function Press the lt ENTER gt button to select the menu function currently displayed or to enable menu option To return to the previous op tion or menu without changing the value Press the lt MODE ESC gt button Current position designation I Current mode l DMX Address lt DMX Address i Press the lt DOWN gt buttons to navigate the digit Press the lt UP gt buttons to navigate the value Press the lt DOWN gt buttons to navigate the digit Press the lt UP gt buttons to navigate the value Use the lt UP gt lt DOWN gt and lt ENTER gt button to scroll through these menu items e Run built in program Select Fast auto quick running e Run built in program Select Slow auto slow running e Run built in program Select Sound sound control e Run built in program Select Slave slave running state 3 Pan Pan mode Select Normal Positive 3 Pan Pan mode Select Reverse Negative 4 Tilt s 4 Tilt Tilt mode 5 Display Select Normal Positive 4 Tilt Tilt mode Select Reverse Negative 5 Dis play 5 Dis ee lay The Background lighting long light b Pan oie Select ee The Background lighting will turn 5 Dis play off affter 30 seconds if no buttons Select 30 Closejare pushed b Pan Angle lt b Pan Angle Pan 540 For built in program only
10. th increasing speed 220 237 Positive rainbow effect with increasing speed 238 255 Negative rainbow effect with increasing speed 0 10 Gobo rotate index 5 GOBO 11 127 Positive and Negative Rotation with increasing speed Rotation 128 191 Positive Rotation with increasing speed 192 255 Negative Rotation with increasing speed 0 9 6 Static 50 59 80 89 90 91 GOBO 92 107 Static Gobo 1 Shake with increasing speed Wheel 108 123 Static Gobo 2 Shake with increasing speed 124 139 Static Gobo 3 Shake with increasing speed 140 155 Static Gobo 4 Shake with increasing speed 156 171 Static Gobo 5 Shake with increasing speed 172 187 Static Gobo 6 Shake with increasing speed 188 203 Static Gobo 7 Shake with increasing speed 204 219 Static Gobo 8 Shake with increasing speed 220 237 Positive rainbow effect with increasing speed 238 255 Negative rainbow effect with increasing speed 0 7 Close 8 22 Open 23 85 Strobe effect with increasing speed 7 Shutter 86 100 Open 101 165 Pulse strobe 166 180 Open Channel DMX value Feature 181 245 Random Shutter 7 Shutter 246 255 Open 8 Dimmer 0 255 0 100 mechanic dimmer 9 Focus 0 255 Motorized focus zoom out to zoom in 0 7 White 8 15 Stop static prism effect 10 Prism 16 127 Rotation prism effect Positive rainbow 128 239 Rotation prism effect Negative rainbow 240 255 Stop static prism effect MO That Control Display 1 Top menu present the cur
Download Pdf Manuals
Related Search