Home
iDive Easy - DiveSystem
Contents
1. PC MODE SYS SET DEFAULT A COMPASS Rn Display By pressing the B or D button you can scroll through the various menu items Pressing A button will access to this function This function allows you to adjust the display BKL Level By pressing the B or D button it is possible to increase or decrease the level of brightness of the display from 0 to 10 Press A to confirm the setting and move to the next setting WARNING A high value 10 decreases the autonomy of battery 44 BKL Time By pressing the B or D button itis possible to increase or decrease the duration of the back light from 1 to 30 seconds Press A to confirm the setting and move to the next setting CAUTION When the battery reaches a critical level the backlight is reduced or turned off Contrast By pressing the B or D button it is possible to increase or decrease the contrast value of the display from 1 to 7 Press A to confirm the setting and move to the next setting 45 Units By pressing the B or D button you can set the unit metric or imperial system m C ft F Pressing A in order to confirm the value Pressing D button to return to watch mode 46 PC Mode TERANSE By pressing the B or D you can scroll through the various menu items DISPLAY Pressing A button in order to computer connection PC to download PC MODE the dive profiles Dive Logger SYS SET DEFAULT By connecting the iDive to the PC also
2. 45 45 46 PC Mode Sys Set UTC lime zone Time Format Date Default Compass Declin Dir Calib iDive during diving Dive NDL CNS and temperature Dive profile Extra Safety Stop Deep Stop Deco dive Dive compass Switch gas during dive 47 48 48 49 49 50 5 oy 52 53 J3 55 J J3 56 56 5 58 39 60 6 iDive the data on the surface iDive after immersion No Fly iDive in Gauge Gauge iDive in Free Free mode during dive Free mode on the surface Troubleshooting 62 63 63 64 64 66 66 6 68 Cautions General instructions This User s Guide contains certain hazards and should be carefully read e It is essential to read this user manual before using the Dive System computer The incorrect use of the computer or its accessories will void the warranty and may cause permanent damage to the computer itself and or its accessories e The dive computer is NOT A SUBSTITUTE to scuba diving training and should be used only by divers who have been properly trained The Dive System computer is an auxiliary tool to diving therefore it is mandatory to always have an adequate table in order to perform the decompression phase in the case of malfunction to the unit e Diving carries risks related to decompression sickness oxygen toxicity and other inherent risk and even careful perusal of this manual and use of this instrument does not rule out potential dangers Anyone who does not understand or does not know
3. A to confirm the O2 percentage inserted iDive automatically calculate the MOD Once you press the A key on the cursor position to define DECO Set if mixture have to be used as a decompressive press B and D to choose YES NO The dive will start with the Mix 1 CAUTION After each dive the MIX is set to 1 automatically as a mixture in use 37 Planner Press B or D in order to scroll through the various menu items and press A to set Planner function MIX PLANNER With iDive can plan your repetitive dives LOGBOOK Press B or D in order to increase or decrease the percentage of oxyge nand press A to confirm PLANNER 02h ST 01 00 Press A to set the surface time and press Bor D to increase or decrease the surface time Press Ato move on NEXT menu and press B to show the table The maxim depth into the table respect the MOD role 38 Press B to next table Press B in order to exit form Planner function PLANNER PLANNER T ATTENTION If you find Dash line it means that this depth can not be planned in according with the MOD set 39 Logbook By pressing the B or D you can scroll through the various menu items Pressing A will access the function iDive store profiles of about 100 hours of diving The data can be tran sferred to a PC using the software DiveLogger Press Bor D key you can switch from the next or previous dive Pressing the A button to return to the watch func
4. atmospheric pressure or moisture in the home of the sensor So in the event of bad weather the error may be up to 80m iDive measured temperature is the temperature of the watch case itself So when wearing the wrist will measure a temperature higher than the outside To measure the temperature environment re move the watch from your wrist and wait at least 5 minutes 23 CALIBRATE 200m Through the function in the DISPLAY menu you can change the unit in Cor F When instead of the indications of the compass appears CALIBRATE you have to re calibrate the compass You can calibrate the compass by following the instructions that you find in the section Compass 24 Clock The computer area has the functions of a clock with hour minute day month and day of the week 28 02 th iDive Dive To activate the Dive to dive you have to press the B button twice Once you enable this feature you can dive using air programmed for nitrox mixtures or your dive 421 00 max sept SY perfomed gas f 25 atcive setup Ga uge To activate the Gauge to immerse you have to press the B button 3 times This function remains active for 15 minutes after the time clock screen appears With this function you can immerse yourself in using your clock as a depth gauge dive time temperature p performed CAUTION If you do not set the beginning of the dive GAUGE mode the clock starts DIV
5. not a mandatory stop and in the event that it fails the computer continues to show the dive data 58 02 3 Deco dive If the diver is required one or more mandatory decompression stop not recommended the central part of the display will be totally on a black background to draw attention to the diver In the middle left of the display is the total time of ascent TTS is located next to the meter indication to which you must perform the first mandatory stop STOP and on the right the minutes related to the first mandatory decompression stop 59 Dive compass Dive compass Pressing the D key to access to underwater navigation In the upper part of the screen shows the direction Grade In order to set a shipping lane press B As long as the direction that we are following is within the 5 from the set course is shown the value of the direction If you move from the set direction with an angle greater than 5 it will show an arrow that indicates the direction to follow to get back in the set direction The electronic compass is able to correct the direction indicated for a tilt angle up to 85 The larger the tilt decreases the accuracy of the instrument up to a maximum of 5 In the lower part display will show the temperature on the left and the depth during the navigation 60 Switch gas during dive If you have set one or more decompression deco gas maximum 3 when you get to the de
6. the battery is recharged PC NODE S N 999995 at D m E 47 j S TERENS ON DISPLAY PC MODE DEFAULT Sys Set By pressing the B or D button you can scroll through the various menu items Pressing A button will access to the function This function allows you to set the time zone date time and the format UTC Time zone Pressing the B or D in this function it is possible to increase or decrease the time zone With the iDive can easily change the time when traveling to destina tions with a different time zone Pressing A button to move to the next setting 48 Time Set the hour and minutes Pressing the B and D buttons to set the time Pressing Ato move to minutes set and B or D to set the minutes Press A button to confirm and move to the next Format Pressing B and D buttons in order to change the hour format 24 or 12 20 46 FORMAT oe Pressing the A button in order to confirm the setting and move to the next 49 Date Is possible to set day month and year Press the B and D buttons to select the exact day TIME 20 46 FORMAT 24 DATE 5 02 01 Pressing the A button to confirm the setting and changes the setting of the month and once you set the month press the A button to confirm the setting changes the setting of the year Pressing the A button the cursor place of EXIT by pressing the B button to confirm the setting returns to th
7. 89 The setting level 3 corresponds to a value of gradient High factor equal to 75 and a value of Gradient minimum factor of 73 o Values of Gradient Factor High 93 Gradient Factor Low 93 Values of Gradient Factor High 91 Gradient Factor Low 91 Values of Gradient Factor High 89 Gradient Factor Low 89 Values of Gradient Factor High 75 Gradient Factor Low 73 Warning he control parameters of the conservatism of the algorithms need to be modified only and only if you have appropriate theoretical knowledge Dive System is not responsible for damage to persons or property due to an incorrect setting of these parameters 31 Safety Stop Setting the timer to the safety stop The timer for the safety stop will start automatically when the end of the dive you will reach a depth less than 6 m are you have performed all decompression stops The value can be set between 0 and 5 minutes Press the B or D to increase or decrease the minutes and then press A to confirm the setting To disable the safety stop set this parameter to 0 minutes 32 Deep stop In iDive you can enable or disable the deep stop Press the B or D to set YES or NO and then the A button to confirm the setting The stop is calculated in the middle of the maximum depth for a time of 2 5 minutes 33 Max PpO2 The value of PoO2 max determines the maximum operating depth MOD in relation to the mixture of oxygen used Press the B or D to set increa
8. E function After using the depth gauge the computer is not blocked So you can use the dive computer in the immersion next since during the use of the depth gauge the computer has calculated the saturation of the tissues with a mixture fictitious high content of inert Due to the use of the mixture for the fictitious calculations during the calculation of the gauge mode decompression profile in the immersion of the next max 48 hours in computer mode be more conservative 26 number of dives depth perfomed active Free Dive To activate the Free Dive to immerse you must press the B button 4 times This function remains active for 15 minutes after the time appears WARNING If you do not set any function at the beginning dive the clock starts running DIVE After a dip in FREE DIVE mode is not available or selectable 2 Settings The computer comes standard with settings that allow for recreational diving then dive up to 40 me ters within the no decompression limits and without the use of gas decompression without having to modify any parameter of your computer If you proceed to make dives that make it necessary switches in decompression gases Nitrox you will need to set and enable the gas that will be used during the dive Caution During the dive can be enabled or disabled gas previously entered during the plan ning but you can not change their composition during the dive 28 iDive menu provides access
9. c field CALIB START Pressing the A button to confirm the setting and to move to the next setting Calib You may need to calibrate the compass By pressing the B or D instead of START appears ROTATE CALIB ROTATE CALIB Take care to not expose the iDive during this function to electromagnetic fields and magnets that can affect the com pass calibration and pres B or D button s Turn the computer on the horizontal plane up to TILT indication appear EAST CALIB EEN Rotate around the longitudinal axis until no signal appears OK as showed in the picture Now the compass is calibrated EAST CALIB Pressing the A button in order to confirm all settings and EXIT press B to exit from the submenu iDive during diving denih Dive i dive time ae n N iDive has been studied to provide to be user friendly during the dive non This can helps the diver to receive the most important and clear in ecompression PEE limit formation s ace max depth performed NDL The No Decompression Limit is the time that you can spend at the ac tual depth without decompression is recommended not to exceed this limit Dive within the NDL is safer 55 CNS and temperature During the dive by pressing the B button once at the bottom the di splay shows the data for the CNS on the left and temperature on the right Pressing the B button again shows the graph of the dive Thi
10. e ascent rate recommended by the instrument an excessive ascent rate exposes the diver to life threatening conditions The computer calculates the total time of ascent but may be longer than that displayed according to certain parameters that the computer recalculates throughout the dive try to use the correct ascent speed observing the depth stops displayed helps meet this duration e No FLY Time it is prohibited to board a plane if the NO FLY TIME icon on the display is still on Re member to plan the last dive of the series taking into account the recommendations provided by DAN Divers Alert Network Even if you meet all the set intervals we cannot exclude the onset of decompression disease while flying after diving Nitrox Diving e Setting the oxygen fraction contained in a cylinder the computer will only take into account whole numbers such as when 32 8 percentage of oxygen is used a whole number value that is less than 32 should be set Do not round to a top number as this will underestimate calculations relating to the nitrogen e Check the PoO2 max settings and never exceed the 1 4 BAR value e DO NOT DIVE without checking the contents of the cylinder with declared reliable instruments Check the gas settings on the computer to match those contained in the cylinder with which you will dive with e Diving with Nitrox requires specific training DO NOT dive without due training Exceeding the maxi mum PpO2 settings and t
11. e clock function 20 46 FORMAT 24 DATE 28 02 AIE 20 46 FORMAT 24 DATE 28 2013 50 DISPLAY PC MODE SYS SET WARNING it RESET 10 DEFAULT L CONPASS Default By pressing the B or D button you can scroll through the functions Pressing A button in order to access Default set will reset the iDive to the factory value Select with the B button the NO or YES and confirm with A button If you confirm this choose the dive will reset to factory setting the iDive will back in watch mode Attention All settings will be reset to the factory value Attention The saturation data will not be reset 51 Compass By pressing the B or D you can scroll through the functions Pressing A button in order to access A 5 ease DISPLAY PC MODE SYS SET DEFAULT SNL Qo A With this function you can calibrate the compass and also the declina tion and direction Declin By pressing the B or D in this selection can be increased or decrease the declination value CALIB START The declination is used to compensate the difference between the north and magnetic north you can get more information s by consul ting the appropriate sites Pressing the A button to confirm the setting 52 Dir By pressing the B or D button s you can set the direction EAST or WEST The direction is used to indicate the direction of the declination of the Earth magneti
12. fo Maximum error in the measurement of temperature 2 6 C Algorithm The computer adopts the model Buelhmann ZHL 16B and offers a choice of 4 levels of conservatism o Values of Gradient Factor High 93 Gradient Factor Low 93 Values of Gradient Factor High 91 Gradient Factor Low 91 Values of Gradient Factor High 89 Gradient Factor Low 89 Values of Gradient Factor High 75 Gradient Factor Low 73 ASM Adaptive Sigmoidal Model Optimizes the decompression calculations for repetitive dives Extra Deep Stops The computer provides the opportunity to enter the Extra Deep Stops Control of violation Monitoring the behavior during the ascent of the diver and puts out the compu ter function if and only if the decompression algorithm is no longer valid Update tissue dive mode 5 seconds Update tissues sleep mode 1 minute Number of stored gas OC 3 Memory 100 hours of immersion 100 hours of immersion 1999 min Intuitive software for adaptive logic Connection to PC USB cable OS updatable Battery It has a rechargeable battery with an autonomy of 25 days in clock mode or 30 hours of diving Perform a full charge cycle before the first use The charge is made by connecting the computer via its USB cable to the PC or to a any USB port The data shown may vary by 15 Warning Do not dive when the computer marks the 30 charge The battery life depends on the applications instal
13. hose recommended imposes an immediate ascent to a lower level and in the event of a CNS value Central Nervous System approaches the recommended limits we advise a reduction of oxygen exposure Before a dive e Use the dive computer only after reading the instruction manual in its entirety and you thoroughly understand its operation In cases of doubt or questions please contact your dealer before diving e It important to understand that every diver is totally responsible for their own safety e Diving with gas mixtures involve different risks from those associated with standard air diving You need proper training to learn how to understand and avoid such risks which are not readily ascer tainable These risks include possible serious injury or death Limits of the dive computer The computer reflects the latest guidelines on diving safety but keep in mind that these studies are to be considered of theoretical basis and processed to reduce but not eliminate the risk of de compression sickness Care and Maintenance e Keep your computer clean and dry Do not expose the computer to chemicals including alcohol To clean the computer use only fresh water to remove all saline deposits Leave the computer to dry naturally do not use jets of hot or cold air Do not expose the computer to direct sunlight or sources of heat above 50 C Keep your compu ter in a cool and dry place 5 C 25 C e Do not attempt to open modify or re
14. ingly accept these risks should not dive with the iDive computer e Diving has some inherent risks that can never be completely excluded No dive table or compu ter can ever ensure that there are no Decompression Illness risk DCI or Central Nervous System Oxygen Toxicity even if the diver scrupulously and correctly follows the instructions of dive tables or computers The computer is not able to take into account individual physiological variations that can alter day to day and for this reason it is good practice to use this instrument in a conservative and precau tionary manner remain well within the limits set by the computer in order to minimize the risk of decompression sickness and oxygen toxicity to the central nervous system The computer does not replace decompression training of tables that you always want to have as a backup together with a depth gauge and watch It is prohibited to share a single computer for two divers while diving each diver must carry their own instrument which provides information only to them It is prohibited to dive with a computer that did not take into account previous dives made by the diver its calculation can never take into account data that it does not know Personal Safety factors carefully read the detailed instructions on how to set up and choose the appropriate level The 0 to 3 value scale provides a higher level of conservatism with the increase of its value Danger warnings e The comp
15. led and the version of the operating system By connecting the USB cable for charging appears within 45 seconds the symbol arrow in charge of the course in screen clock The charge is complete when the battery symbol disappears from the screen clock The data of battery life are related to applications in optimal conditions Improper use of the backlight will significantly decrease battery life Beware if you are immersed in particularly cold water battery voltage may drop Therefore it is always advisable to recharge the battery before diving in extreme conditions It is recommended to always complete the charging cycle If a charge cycle is not completed the indicator of battery charge may not be precise After installing an APP or update the operating system it is recommended that a cycle Battery charging complete Weight 140gr 100 compatible with the program of data collection DAN DL7 DSL Level 5 Menus and Functions amp SETTINGS SETTINGS SETTINGS Backlight i aie For you activate the backlight press the C key twice altimeter Its unique backlight gives an accurate view around the display even imperature in twilight diving pressure AIM Battery level To view the battery level by pressing any key The battery level will be displayed for 30 seconds when the service higher than 30 To autonomy less than 30 the symbol will remain always in evidence free model firmware Informa
16. maxi mum depth of the dive 66 Pressing the B button the display will show the temperature of the water on the left and on the right the maximum depth reached during the entire session dive Free mode on the surface On the surface iDive shows the data of the last dive on the left the depth at zero value and on the right the button time of the last dive JE J In the central part of the display will shows the surface interval and in the lower left part total number of dives performed in the series and DIVE in the lower right part the maximum depth reached during last dive 67 troubleshooting e plug the usb cable to pc e unistall the usb cable from pc from PC device manager e unplug the usb cable to pc Driver not found e install the DiveLogger e open the DiveLogger e plug the usb cable to pc e reinstall the usb cable driver Battery drains out very fast Recharge the iDive a whole night using a USB wall charger e open the DiveLogger e plug the USB cable to PC and to iDive CRC Error e select the correct COM port the COM is assigned automa tically by your PC from Setup button e click on Update on DiveLogger 68 2015 DiveSystem www divesystem com
17. nce on the INFO button if you are in screen battery level worsening The next table shows how to interpret the weather forecast of the iDive stable Improvement in The weather forecast is based on the monitoring of atmospheric pres sure in the previous 18 hours To get a reliable weather forecast you must not make changes in elevation otherwise the change atmosphe ric pressure due to the change in altitude may introduce inaccuracies in forecasting weather Attention after the dive due to moisture present in the area of the pressure sensor actually accessed could be lower than the actual one which could compromise a correct weather forecast After a change in proportion of ca The weather will be back 50m valid after 3 5 hours 22 O ES Atmospheric pressure altimeter and temperature NE ESES A altitude To view inf ti boutat her a Tan ey seq leve TO View information about atmospheric pressure altimeter and tem Tees perature press the INFO button once if you are in the screen battery temperature ats pressure level Atmospheric pressure is the pressure at any point the Earth s atmo sphere It is measured in millibars mbar Warning after a dive due to moisture present in the headquarters of the pressure sensor read may be slightly lower than the real The value of the height above sea level is calculated based on the barometric pressure Warning the precision of the measurement depends on the altitude directly from
18. oar ot ate Pag ta ta User manual o Ver 2 0 Introduction Congratulations on purchasing your Dive System computer Dive System with the quality of its products has always been at your side to guarantee comfort en joyment and safety in diving The Dive System computer that you purchased is an extremely modern computer which includes com prehensive software for recreational and technical diving The Dive System computer iDive Easy includes a decompression algorithm supportive of air and nitrox dives a complete algorithm integrates decompression and its processor calculates in real time the specific dive profile of your dive for the benefit of flexibility and safety Check the www divesystem com website for any updates to the manual Table of Contents Introduction 2 Table of Contents 3 Cautions 5 General instructions 5 Danger warnings r Nitrox Diving 9 Before a dive 10 Limits of the dive computer 11 Care and Maintenance Specifications _ 83 Menus and Functions 18 Backlight 19 Battery level 19 Information 19 Compass 20 Weather 22 Atmospheric press altim and temp ie Clock 25 Dive 25 Gauge 26 Free Dive 27 Settings Dive set P Safety Security Level Safety Stop Deep stop Max P p02 Salt and Fresh water Mix Mix 1 Mix 2 Planner Logbook Alarm ASC Speed Max Depth Deco Viol Display BKL Level BKL Time Contrast Units 28 30 30 er 353 34 eis 36 36 e 38 40 42 42 43 43 44 44
19. pair the computer on your own Always contact the manu facturer through an authorized service provider Do not put the computer into a hyperbaric chamber e The computer is designed for accuracy in the readings of 2 European rules require that the unit is controlled periodically from the point of view of accuracy in reading the depth and time The level of precision required by European standards is 3 5 e The warranty is voided if the endcap is removed from a non authorized service center e The computer iDive is built to withstand use in sea water but at the end of the dive you have to rinse well with fresh water and do not expose to direct sunlight or heat sources to dry e Check the display there are no traces of moisture on the inside Note Do not groped to open the computer for any reason in case of problems contact your service the parent through the retailer where it was purchased Specifications Your computer is made in all stainless steel 316L with mineral glass allowing in this so a high impact resistance and corrosion resistance Display is equipped with an LCD Display 100 matrix Particular effort has been put in the development of a navigation system that allows the diver access to the settings in an easy and intuitive Certifications The computer hardware has received CE and EN13319 Warranty sensor accuracy 130 m Maximum depth 220 m Accuracy of Measuring Absolute Pressure min max
20. pth determined by the MOD of the first deco gas the display starts flashing the current gas in the lower left Pressing the A key you enter in switch gas screen With the button A you can select YES or NO and in order to confirm press the button B ame Once the switch gas is confirmed the iDive returns to the dive infor U matn The new gas that you are using is indicated At each switch gas provide the same procedure 7 max depth performed 61 iDive the data on the surface Once on the surface and 10 minutes has elapsed by pressing the B button you will see some important post dive data as e Desaturation e NoFly Time e Surface No Fly Surf Time 02 62 iDive after immersion No Fly Dive System recommended to follow the DAN Pre flight interval gui delines The current indications DAN http www diversalertnetwork org me dical faq faq aspx fagid 54 recommend e A minimum surface interval of 12 hours after a single dive before boarding a commercial aircraft e An interval of at least 24 hours to divers using scuba for several days or for repetitive dives or dives have required mandatory decompres sion stops These indications may vary due to new studies and research Please check the if there are new rese arch guidelines on this matter Make therefore always refer to the most current guidelines on the site if different from DAN those li sted above WARNINGS On the surface
21. s function can be useful to review the type of profile runs from the diver up to that moment Dive profile iDive allows you to view your dive profile while you re still in the water Pressing the B button twice displays the dive graph the current depth and dive time Pressing the B button the screen returns to the iDive dive information 56 3 re 02 Extra Safety Stop In the event that you have set the safety stop which is recommen ded for all dives as per the instructions of paragraph Dive Set this will be displayed on the computer display during ascent from depth of 6 9 m The park is set by default to 5 m can not be changed in the menu Dive Set you can set the minutes of this stop s DEEP STOP 2 EE 02 Deep Stop If you set Deep Stop function it appears 5m before the actual depth required and will be removed if not done 5 m after the required depth The display has been designed so that the deep stop data will show in the middle of the display In the event that the deep stop is made during no stop Safety dive will remain visible the NDL time on the right side of the display on black background If the deep stop is carried out in dives with obligatory decompres sion stop not recommended the display will show the TTS time to surface obligatory stop time including in the left part of the display black background followed by the meters and the time of deep stops The deep stop is
22. se or decrease the value and then the A button to confirm setting The PpO2 max can be set to a value between 1 2 and 1 6 bar It is recommended to avoid exposure to oxygen partial pressures hi gher to 1 3 ATA Oxygen toxicity is considered a high risk factor for the life of the diver the studies about can not gua rantee NOT exposure to this danger of oxygen toxicity even at partial pressures less than 1 3 ATA the diver must know through the proper training this risk factor and consciously accept Otherwise must not dive with the computer iDive 34 Salt and Fresh water iDive measure the pressure and converts it into depth using the density water as a constant The depth of 10 m in salt water corresponds approximately to 10 3 min fresh water Press the B or D to set SALT choose to salt water FRESH and for fresh water and then the A button to confirm 35 DIVE SET PLANNER LOGBOOK Mix Press B or D key in order to scroll the various menu items and then the A button to confirm the setting With iDive you can set more gas mix Nitrox Mix 1 Press B or D in order to increase or decrease the percentage of oxygen and A to confirm the o2 percentage inserted iDive automatically calculate the MOD Press A in order to move to NEXT and set the Mix 2 ATTENTION The dive will start with the Mix 1 36 HOD 2 DECO YES Mix 2 Press B or D in order to increase or decrease the percentage of oxygen and
23. the computer iDive continues to give information about any errors desaturation times surface interval and NO FLY TIME In GAUGE mode the no fly time is always 24 hours Zs iDive in Gauge depth max depth performed Gauge This mode allows you to use your computer as a common depth iDive has the ability to set a countdown The iDive is set by default with a time to count down to 3 minutes To activate the countdown press B To increase the minutes once in immersion press A During the dive the display will show START T and pressing the B button you can increase the time up to a maximum of 9 59 64 Pressing the A button in order to show T or T Pressing the B button you can decrease the time to a minimum of 0 30 65 iDive in Free ATTENTION This function is not available and can not be accessed if the user have dived within 24 hours with Dive Mode or Gauge mode Free mode during dive If your diving computer is set in Free mode this function will be main tained for 15 minutes after which it will return in the Watch mode If the surface interval between dives is higher than 15 you will have to set your computer back on free mode and will be considered as a new series of free diving ki DEPTH During free diving the computer show the data for the dive in progress In the upper left is the current depth and right part the dive time down on the left the dives number in the lower right part
24. tion 27 30 6m_ 27 C 51 21 02 0 CNS 0 CNS 40 number of dive depth perfomed O2 used 30 6m_ 27 C 21 027 0 ONS S minimum temperature 514 protection factor dive time start dive time Inthe logbook menu is displayed a summary page that shows each dive that contain the following information Progressive number of dives Protection level Date Hour Dive time Maximum depth Bottom Time Breathing gas or mode in the event of Gauge and Free Minimum temperature CNS value 41 VSEE DIVE SET MIX PLANNER LOGBOOK SNUR Woe A Alarm By pressing the B or D button you can scroll through the various menu items Pressing A will access the function With this function you can set the alarms ASC Speed By pressing the B or D button can be activated alarm YES or disable NO the alarm of scent speed Press A button in order to confirm the setting and move to the next setting 42 Max Depth By pressing the B or D button you can activate YES or disable NO alarm of maximum depth the maximum depth depending on the PpO2 set and the gas used Press A to confirm the setting and move to the next setting Deco Viol By pressing the B or D button can be activated YES or disable NO the alarm about deco violation Press A to confirm the setting and move to the next setting 43
25. tion E r a version To view information click once on the button A if you are screen bat il tery level Press A button twice if you watch the screen battery v1 0 0 993 1 78 E Made in Italy a evel Dive gt lt In addition to the serial number of the computer you can check the 1 AN version of software installed in your computer made in A italy weather lubber line direction IX temperature NE E sE S 54 NE E se S 200m aa H altitude O 200m 27 C seam J compass grade sea level pressure Compass To view the compass press once on the D if you are in screen battery level Turning the clock compass indicates the direction in front of us To set a route press B So that the direction is within 5 from the set course is shown the value of the direction If you move from the set course for an angle greater than 5 will show an arrow that indicates the direction to follow to get back in the set course The electronic compass is able to correct the direction indicated for a tilt angle up to 85 The larger the tilt decreases the accuracy of the instrument up to a maximum of 5 20 Ld 54 4 NE E se S 200m 27 C 990mb A The table below shows the meaning of each of the short for direction on the display 21 Weather iDive also shows you the weather forecast To view the weather forecast press o
26. to functions and settings are changed To enter the menu press the B button before entering the Dive screen and then press the A button SETTINGS SETTINGS SETTINGS 29 By pressing the B or D from the main screen menu you can scroll throu gh the various menu items When you see the name of a function you must press the A key to ac cess the function Dive set Pressing A will access the function In this function you can set the level of security the dwell time Safety deep stop function the max PpO2 and water P Safety Security Level The computer iDive is equipped with an algorithm Buehlmann the al gorithm based on the theories of Buehlmann implemented in iDive a derivative of the model BuehImann ZHL16B that integrates the results of latest research in the medical scientific Is possible to change the levels of conservatism turning 4 different set tings based on the gradient of the factor model Buehlmann ZHL16B Press the B or D to increase or reduce the level of conservatism and then the A button to confirm setting 30 The setting level 0 corresponds to a value of gradient High factor equal to 93 and a value of Gradient factor at least equal to 93 The setting level 1 corresponds to a value of gradient High factor equal to 91 and a value of Gradient minimum factor of 91 The setting level 2 corresponds to a value of gradient High factor equal to 89 and a value of Gradient factor at least equal to
27. uter is NOT intended for PROFESSIONAL use The computer is intended for sports use only e Non compliance to the above may expose the diver to an increased risk of incurring decompression illness DCI It is therefore not recommended for commercial or professional diving e Before diving you must check the battery level DO NOT dive with the battery level of 30 or lower check that the display does not show any sign of malfunction and that it is legible e Check that the settings correspond to those desired Keep in mind that our body has daily variations of which the computer cannot take into account You must avoid all behavior that increase risks associated with decompression sickness such as rapid ascents yo yo diving decompression stop obligations dives with surface intervals too close toge ther and by any other behavior not dictated by common sense and training However the use of the instrument does not allow its use without due preparation through specific training Failure to follow the basic rules of diving exposes the diver to life threatening circumstan ces We recommend diving within the safety curve in order to reduce risks associated with decom pression sickness We recommend not exceeding 40 meters diving or based on the oxygen value within the cylinder max 1 4 BAR PpO2 Exposure to higher values exposes the diver to life threatening conditions We do not recommend diving with Mandatory Safety Stops Comply with th
Download Pdf Manuals
Related Search
Related Contents
Navigon 33xx PM-3 Manual V1.0 - OPPO Digital UK Yamaha Star XVS1100T Owner`s manual Document officiel du fabriquant SAMSUNG - Intelware Freescale Semiconductor MC68HC08KH12 User's Manual Tannoy Z600 Cell Phone User Manual Capitolato speciale tecnico - Comune di San Benedetto del Tronto Powermate 009-0367CT Use and Care Manual Copyright © All rights reserved.
Failed to retrieve file