Kimo Kiray 100 Manual
Contents
1. 207 1244 aenbikencolon com actoolsupply com To avoid any inconvenience Do not aim directly or indirectly reflection on reflective surfaces the laser in the eyes e Change the batteries when the indicator blinks Do not use the thermometer around explosive gas vapor or dust Do not leave the device with the lock on lock at the top right of the screen because in this configuration the instrument does not turn off automatically To prevent damage on your instrument or equipment please carefully respect these conditions To protect from electric and magnetic fields of static electricit Protect from thermal shock Infrared thermometer how does it works Infrared thermometers can measure the surface temperature of an ee Py object Its optic lens catches the energy emitted and reflected by the oo object This energy is collected and focused onto a detector This Aan information is displayed as temperature The laser pointer is only used to aim at the target C TOOL PLY COM 207 1244 E CE certification This device meets with following standards requirements EN 50081 1 1992 Electromagnetic compatibility Part 1 EN 50082 1 1992 Electromagnetic compatibility Part 2 WE Maintenance To install or change the 9V battery open the part near the trigger and put it in the battery compartment Mi Accessories e Case holster with passer by belt e User manual Infrared2. La sign for a negative temperature 48 at 260 mm DIS DAY sesicecsiesevsesesactaxesesacntene 4 digits with LCD backlighted display Auto extinction 0 0 0 Automatic after 7 seconds of inactivity High low alarm 00 Flashing signal on display and beep signal with adjustable thresholds Power Supply ccccee Alkaline 9V battery Autonomy 105 h inactive laser and backlight 20 h active laser and backlight Use temperature From 0 to 50 C Storage temperature From 10 C to 60 C Relative humidity From 10 to 90 HR in operating mode and gt 80 RH in storage YES NO DimensiOn cccceeee 145 x 95 x 40 mm Weight cceccceeeseereeees 180 g included battery Make sure that the target is larger than the size of the laser sighting Kimo KIRAY 100 Infrared Thermometer actoolsupply com LCD backlighted display rae 100 Up button Mode button Battery compartment E KIRAY 100 instrument buttons 1 Up button It allows to increment emissivity and thresholds of high and low alarm This button also allows in measurement mode to activate or deactivate the laser 2 Down button It allows to decrement emissivity and thresholds of high and low alarm This button also allows in measurement mode to activate or deactivate the backlight 3 Mode button It allows to navigate trough the modes emissivi
3. C TOOL actoolsupply com BRM amie User Manual KIRAY 100 new Infrared thermometer Infrared thermometer KIRAY 100 equipped with a dual laser sighting is a key instrument to diagnose inspect and check any temperature with the advantage of using a no contact technology You can measure safely surfaces temperatures of warm and dangerous objects or objects with uneasy access It s the perfect tool for measurements in a house a garage a workshop a kitchen etc E Technical features Spectral response 8 14 um Optical D S 20 1 13 mm at 260 mm Temperature rang From 50 to 800 C Accuracy From 50 20 C 2 5 C From 20 to 300 C 1 of reading 1 C From 300 C to 800 C 1 5 Infrared repeatability From 50 to 20 C 1 3 C E Distance from the target From 20 to 800 C 0 5 or 0 5 C Display resolution 0 1 C Response time 0 150 ms EMISSIVItY 0cccccseeeeeeees Adjustable from 0 10 to 1 0 pre set at 0 95 Distance 254 260 008 mm Over range indication Display indication Diameter 12 7 13 25 4 mm Dual laser sighting Wave length from 630 nm to 670 nm Output lt 1mW Class 2 II Positive or negative temperature indication Automatic no indication for a positive temperature
4. ents Before measuring temperature it is recommended to set the technical unit C or F To set this parameter open the battery door by pushing on both sides of the trigger It is not necessary to disconnect the battery to make this setting e Set the technical unit Unit Set the selector unit to C or F with Pi a E a screwdriver Mi Operating mode Press ENT trigger to turn on the instrument The backlighted screen indicating the temperature and the laser turn on Keep ENT pressed Place the laser sighting at the center of the area to be measured Release ENT Read the displayed temperature Disaply stays on for 7 seconds after the last manipulation HOLD appears at the top left of the screen measurement stays displayed Press UP button ta activate or deactivate the laser Press DOWN button to activate or deactivate the backlight E Command buttons Trigger Turning on the device ENT pressed activation of the laser sighting and temperature measurement ENT released display is on HOLD HOLD fixed and gives the last measurement Display stays on for 7 seconds If no buttons are activated and if continuous measurement is inactivated the instrument turn off after 7 seconds Mode button Allows to define types of desired measurement emissivity lock high alarm low alarm by pressing as many time on this button EMS when KIRAY100 instrument is turned on p
5. ress MODE button flashes Set emissivity by pressing on UP button to increment it or DOWN button to decrement it By default emissivity is set on 0 95 To back to measurement mode press ENT button press MODE button to go to next mode Lock when KIRAY 100 instrument is turned on press MODE button twice the lock indicator at the top of the screen flashes and OFF is displayed Press UP or DOWN button to put the lock ON Press MODE button to go to next mode or press once ENT button KIRAY 100 instrument takes continuous measurements To cancel lock mode press once ENT button actoolsupply com High alarm when KIRAY 100 instrument is turned on press 3 times MODE button to set high alarm ON or OFF flashes press UP or DOWN button to activate or deactivate it ON or OFF Press MODE button high alarm temperature is displayed and high alarm indicator flashes press UP button to increment it or DOWN button to decrement it To return to measurement mode press ENT button press MODE button to go to next mode Low alarm whenKIRAY 100 instrument is turned on press 5 times MODE button to set low alarm ON or OFF flashes press UP or DOWN button to activate or deactivate it ON or OFF Press MODE button low alarm temperature is displayed and low alarm indicator flashes press UP button to increment it or DOWN button to decrement it To return to measurement mode press ENT button press MODE button to go to nex
6. sensor Emitted energy by the object Laser sighting in the form of radiation gt aikencolon com_ actoolsupply com
7. t mode WM Emissivity Emissivity is a term used to describe the energy emitting characteristics of materials Most 90 of typical applications organic materials and painted or oxidized surfaces have an emissivity of 0 95 pre set in the unit Inaccurate readings will result from measuring shiny or polished metal surfaces To compensate cover the surface to be measured with masking tape or flat black paint Allow time for the tape to reach the same temperature as the material underneath it Measure the temperature of the tape or painted surface See table below for values of emissivity of specific materials Aluminium 0 30 Ice 0 98 Asbestos 0 95 lron 0 70 Asphalt 0 95 Lead 0 50 Basalt 0 70 Limestone 0 98 Brass 0 50 Oil 0 94 Brick 0 90 Paint 0 93 Carbon 0 85 Paper 0 95 Ceramic 0 95 Plastic 0 95 Concrete 0 95 Rubber 0 95 Copper 0 95 Sand 0 90 Dirt 0 94 Skin 0 98 Frozen food 0 90 Snow 0 90 Hot food 0 93 Steel 0 80 Glass 0 85 Textile 0 94 Water 0 93 Wood 0 94 E Important information For correct measurements Do not take any measurement on metal or shiny or reflective surfaces Do not measure through transparent surfaces such as glass for example e Water vapor dust smoke etc may prevent correct measurements because they obstruct the optical of the instrument e Make sure that the target is larger than the size of the laser sighting C TOOL isit LY COM
8. ty lock high and low alarms actoolsupply com Mi KIRAY 100 instruments description IR sensor infrared Down button Laser sighting output Trigger ENT Set technical unit C F E Modes flow chart C TOOL PLY COM 207 1244 ameniikencolon com MODE mode button MAX ENT trigger yi Set emissivity EMS E 0 90 up and down button _MODE Arr a Activate or deactivate locking of the r 1 measurement with up and down button Nia Gee Activate or deactivate high alarm l IL LII I _MODE Y n aE id Set high alarm with up and down JJ buttons MODE NT hie ays Activate or deactivate low alarm l Lil _MODE Y woe Le Set low alarm with up and down J button 1 Unit of measurement C F 2 Low battery indicator 3 Emissivity value 0 95 pre set 4 Max temperature indicator 5 Temperature value 6 Current measurement indicator 7 HOLD indicator fixed measurement 8 Laser operation indicator 9 Lock Indicator continuous measurements 10 High alarm symbol fixed alarm is activated Flashing beep alarm threshold exceeded 11 Low alarm symbol fixed alarm is activated Flashing beep alarm threshold exceeded actoolsupply com actoolsupply com Wi Settings before taking measurem
Download Pdf Manuals
Related Search